XIAMEN LEELEN TECHNOLOGY L8500215 2nd-confirm door station User Manual

XIAMEN LEELEN TECHNOLOGY CO., LTD 2nd-confirm door station

User manual

2. Technical specification6.4.3 StructureCamera:Viewing angle:Lens:Resolution:Min. illumination:Video output:Audio SNR:Audio distortion:Standby current:Working current:Working voltage:Environment temperature:1/3" CCD or CMOS92°F=3.6420TV Line0.01 LUX1Vp-p/75Ω≥25dB≤7%≤60mA≤230mADC12V (for audio); DC32V (for video)-40℃~+45℃B) Model No.15 (Flush mount):LEDsCameraLight sensorCast aluminium panelSpeakerName tagCall buttonMicrophoneScrewScrewCard readerinsideFlush mount boxA) Model No.15 (Surface mount):Rain shield(Surfacemount bracket)LEDsCameraLight sensorCast aluminium panelSpeakerName tagCall buttonMicrophoneScrewCard readerinsideSurface mount bracket1L8 User’s Manual(2nd-confirm door stations)1. Door stationsModel No.15A surface mount79X148X45(mm)Model No.15C flush mount93X168X52(mm)Model No.15B surface mount,card reader. 79X148X45(mm)Model No.15D flush mount,card reader. 93X168X52(mm)4. InstallationA) Surface mounta. Take off the door panel from the bracket     with the enclosed screw driver( ).b. Fix the bracket on the wall with two screws     and expansion plugs( ).c. Put the door panel on the bracket and fix it     after connect the cable( ).①②③①②Bracket(rain shield)Door panelexpansion plugs③Model No.15
B) Flush mount a. Produce a groove (75x150x50mm)      on a proper position of the wall( ).b. Take off the door panel from the box     with the enclosed screw driver( ).c. Fix the box in the groove with screws     and expansion plugs( ).d. Fix the door panel in the box with the      screws( ).①②③①④Door panelBoxexpansion plugs②①③2B. Use cards to release doors5. Operation on door stationsA. Call residents6. 2nd-confirm door station listProduct p odel numbers         Sizes: L x W x D (mm)                   Exclusive featureshotos        Model names            Series m102X175X39CA L LMICModel No.15AModel No.15BModel No.15CModel No.15DModel No.15EModel No.18JB-5000 L8-5002MBGCW(8)-S15JB-5000 L8-5002MBGCQ(8)-S15JB-5000 L8-5002MBCNW(8)-S15JB-5000 L8-5002MBCNQ(8)-S15With name tag and surface mountWith card reader and surface mountWith card reader and flush mountWith card reader and flush mountWith name tag and flush mount93X168X5293X168X5279X148X4579X148X45With keypadWith keypad and card readerJB-5000  L8-5002M BCQ(8) -S18AJB-5000  L8-5002M BGCQ (8) -S18A93×1 68×3 2JB-5 000 L8-5002MBCQ(8 )-S 15EXIMAN LEELEN TECHNOLOGY CO.,LTD.65, SUNBAN SOUTH ROAD, JIMEI, XIAMEN, 361021 CHINAThis appliance shall not be disposed together with the normal waste. It must be recycled.Atitude during operation below 2km.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu