XIAMEN SCALETECH SDCP2PRN Stamps.com Model P2 Printer User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1870836
Application ID	OWyq4oF1JIDNthoIdg6XEg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.31kB (303911 bits)
Date Submitted	2012-12-28 00:00:00
Date Available	2012-12-28 00:00:00
Creation Date	2012-12-13 09:56:20
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2012-12-28 11:44:20
Document Title	Microsoft Word - P2 FCC Test Printer Installation Guide XP 12-03-12 LAN Batch v2.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Stamps.com P2 Printer
Installation Guide
Installing the printer driver via USB
1. Unzip the file “InstallP2v4.zip” to a temporary folder (for example c:\InstallP2v4\drivers)
2. Attach the power cable to the power adapter
3. Plug the power adapter into the DC power connector on the back of the printer. Plug
the other end of the power cable into a power outlet
4. Connect the scale to the computer by attaching the “A” end of the USB cable to your
computer and the “B” end of the USB cable to the printer.
5. Turn the printer on using the On/Off button
on the front of the printer. You will
see a series of messages on your computer screen that indicate the printer has been
detected by your computer. The “Found New Hardware” wizard will launch
automatically to install the printer driver
6. Point the wizard to the temporary folder where the files were extracted
(c:\InstallP2v4\drivers). Click
7. Click “Continue Anyway”. The driver files will be copied automatically.
Loading Paper
1.
2.
3.
4.
Switch Printer OFF
Open the printer lid
Put paper in spool making sure the paper hole is on the left side
Put spool back into the printer. Pull the paper and make it pass under paper guides.
5. Close the lid
6. Switch the Printer ON
7. Press the Advance button
to position the paper
Printing via USB
1. Open the MS Word file P2Test.doc
2. From MS Word, click File  Print. Select “Stamps.com P2 Printer”
3. Click OK
Configuring LAN
The printer does not support automatic IP addressing or DHCP, it must be configured with a
static IP address. The 2 FCC samples are shipped with the following configuration
IP address:
TCP port:
Netmask:
Gateway:
192.168.0.130
1024
255.255.255.0
192.168.0.1
To change the LAN settings, install the LAN Setting Configuration Windows software
Unzip the file “lansettings.zip” to a folder and “Run” the “setup.exe” and click “Next” when
prompted.
The printer must be put into “ISP Mode” (In‐System Programming) in order to change the LAN
settings. Follow the instruction below to do so.
1. Unplug the printer adaptor from the mains.
2. Connect the printer to the computer using a USB cable.
3. Plug the adaptor back into the mains. Do not press the ON/OFF button.
4. Put the printer into “ISP Mode” by holding the Advance button down (do not release yet) and
then press ON/OFF button. Release the Advance button. The Blue LED on the Advance button
will blink to denote that the printer is in “ISP Mode”.
Click on the “Printer Lan Set” link to open the software and change the LAN settings.
NOTE: Please do not change the TCP Port default value = 1024
Click “Save” button to confirm change.
Installing the LAN Printer
Installing the LAN printer in Windows XP:
1. Open a DOS prompt and go to the drivers directory
2. Type “installp2v4 ipaddress” where ipaddress is the IP address that you
have used (for example installp2v4 192.168.0.138 )
3. Press Enter key
4. The printer will be installed as Stamps.com P2 Printer (LAN)
Printing via LAN
1. Open the MS Word file P2Test.doc
2. From MS Word, click File  Print. Select “Stamps.com P2 Printer (LAN)”
3. Click OK
Printer Web server
Open a browser and enter the address http://192.168.0.138 to view the
printer’s simple web server.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radiofrequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
FCC Warning
This equipment has been tested and found to comply with the regulations for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference that may cause
undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 7
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:417a6016-38a8-43bb-b131-1ec8fb42b08d
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Create Date                     : 2012:12:13 09:56:20+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:12:28 11:44:20-08:00
Metadata Date                   : 2012:12:28 11:44:20-08:00
Document ID                     : uuid:bdc55a30-f2e6-4229-87ae-3cf7e7f7c4e3
Instance ID                     : uuid:807449f8-4cf3-46d6-a478-de7851e1fed7
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - P2 FCC Test Printer Installation Guide XP 12-03-12 LAN Batch v2.doc
Author                          : Administrator

EXIF Metadata provided by EXIF.tools