Xantrex Link 1000 Users Manual About_Link1000

2015-02-03

• Contents
• Figures
• Introducing Link 1000
  • Introducing the Link 1000
    • Inverter/Charger Control Functions
    • Monitoring Functions
  • Reading the Link 1000 Control Panel
    • Where to go From Here
• Installing the Link 1000
  • Planning the Installation
    • Supplied Parts
    • Materials You Need to Supply
    • Tools
    • Installation Considerations
      • Safety
      • Performance
      • Color-Coded Wiring
      • Twisted Pair Wires
      • Separate Engine Starting Battery
  • Installing the Link 1000
    • Overview of Installation Steps
    • Mounting the Link 1000 Control Panel
    • Mounting and Cabling the Shunt
    • Wiring the Terminal Block
    • Connecting Terminal Block Wires to Shunt and Battery
    • Installing Fuses
    • Connecting the Phone Cable
    • Testing the Installation
    • Maintenance
    • Disconnecting the Inverter/Charger
• Setting up the Link1000
  • About Link 1000 Settings
    • Probable Changes
    • Possible Changes
    • Other Settings
    • How to Enter Setup Mode and Change a Value
    • Locking Your Setup Values
    • Resetting Values
    • Battery Capacity
      • Estimated Capacities for 12 Volt Flooded Batteries
      • Estimated Capacities for Gel Cell Batteries
      • Estimated Capacities for Multiple Batteries
      • Changing the Battery Capacity Setting
      • Changing the Battery Type Setting
      • Changing the Ambient Temperature Setting
    • Charged Parameters
      • Changing the Charged Voltage Setting
      • Changing the Charged Current Percentage Setting
      • Changing the Time Remaining Setting
      • Changing the Power Share Setting
      • Changing the Idle Mode Setting
    • Advanced Function Values
      • How to Enter Setup Mode and Change a Value: Reminder
      • F01 Auto Display Scanning
      • F02 Display Sleep
      • F03 Set or Display Ambient Battery Temperatures
      • F04 Toggle Display Between Ah and kWhr
      • F05 Turn on Alternative Energy Mode
      • F06 Manually Set CEF
      • F07 Set Temperature Coefficient
      • F08 Set Peukert’s Exponent
      • F09 Set Low Battery Discharge Floor
      • F10 Select Battery Type
      • F11 Turn on Second Battery Voltage Sense
      • F12 Number of Overload Conditions Experienced
      • F13 Number of Inverter Low Battery Shutdowns
      • F14 Test Control Panel Display
      • F15 Display Software Revision Number
      • F16 Turn on Active Temperature Compensation
• Using the Link1000
  • Monitoring Functions
    • Choosing a Display Unit: Volts, Amps, Ah, or Time
    • Reading the Battery State-of-Charge
      • Scaling the BATTERY STATUS Light Bar
  • Inverter Functions
    • Turning on the Invert Function
    • Changing the Idle Mode Setting
  • Charging Functions
    • Summary of CHARGER STATUS LEDs
    • Charging the Batteries
    • Equalizing the Batteries
      • Precautions
      • Equalizing Gel Cell Batteries
    • Activating Power Share
    • Battery Capacity Testing
    • Synchronizing the Link 1000 to the Battery
      • Over-charge Ah (Accumulation of Positive Ah)
  • Battery History
    • Interpreting Battery History
  • Reading Error Codes
• Specifications
  • Control Panel: Electrical Specifications
  • Control Panel: Physical Specifications
  • Default Settings
• Product and System Information
  • Warranty
  • Disclaimer
    • Product
    • Exclusions
    • Warning: Limitations On Use
  • Return Material Authorization Policy
  • Return Material Procedure
  • Product Information
  • Record of System Settings
    • Symbols
    • Numerics
    • A
    • B
    • C
    • D
    • E
    • F
    • I
    • L
    • M
    • N
    • O
    • P
    • R
    • S
    • T
    • V
    • W
• Index