Xexun Technology XT107 GPS Tracker User Manual Z6VXT107 FCCID UsersManual

Shenzhen Xexun Technology Co., Ltd. GPS Tracker Z6VXT107 FCCID UsersManual

User manual

1 GPS TRACKER USER MANUAL UPreface Thank you for purchasing GPS Vehicle Tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
2 Content 1 Summary ------------------------------------------------------------------------------------------------- 2 2 Application ------------------------------------------------------------------------------------------------ 3 3 Hardware Description -------------------------------------------------------------------------------- 3 3.1 Front Face ------------------------------------------------------------------------------------ 3 3.2 Rear Face -------------------------------------------------------------------------------------- 4 3.3 Interior --------------------------------------------------------------------------------------- 4 4 Specifications ---------------------------------------------------------------------------------------- 4 5 SIM Card Installation ------------------------------------------------------------------ 5 6 Startup ------------------------------------------------------------------------------------- ----------- 5 7 Usage --------------------------------------------------------------------------------------------------- -- 7 8 Track Modes ---------------------------------- --------- -------- ---------------------------------------- 7 8.1 Initialization ---------------------------------- --------- -------- 7 8.2 Change Password ---------------------------------- --------- -------- 7 8.3 Authorization ---------------------------------- --------- -------- 7 8.4 Auto-Track ---------------------------------- --------- -------- 9 8.5. Tlimit Function---------------------------------- --------- -------- 8.6. GPS refurbish setting---------------------------------- --------- -------- 8.7 Reboot remotely---------------------------------- --------- -------- 8.8 Geo-fence ---------------------------------- --------- -------- 9 8.9 Movement Alert ---------------------------------- --------- -------- 11 8.10 Overspeed Alert ---------------------------------- --------- -------- 11 8.11 IMEI Checking ------------------------------ --------- -------- 12 8.12 Time differences setting ----------------------------------------------------------------- 12 8.13 SOS Function --------------------------------- --------- -------- 13 8.14 SMSLINK --------------------------------- --------- --------------------------------------13 8.15 SMSONE ----------------------------------------------------------------------------13 8.16 Low Battery Alert --------------------------- --------- -------- 14 8.17 SMS Center ------------------------------ --------- -------- 14 8.18 GSM ID ------------------------------------------------------------------ 14 8.19 Motion Sensor ------------------------------ --------- -------- 14 8.20 SD Card Function ------------------------------ --------- -------- 15 8.21 Switch on/off ------------------------------ --------- -------- 15 9 Monitoring Mode ------------------------------ --------- -------- 15 10 Talking Mode ------------------------------ --------- -------- 15 11 GPRS Setting -------------------------------------------------------------------- 16 12 Cautions --------------------------------------------------------------------- 17
3 13 Faults & Solutions --------------------------------------------------------------------- 17 1 Summary Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS,and guard against theft of Vehicle. 2 Applications z Vehicle rental / Fleet management,etc. z Protect the child / the elder / the disabled / pet,etc. z Businessmen safety. z Personnel management. z Covert tracking. 3 Hardware Description 3.1 Front Face For call USB Port,for charging and upgrade the firmware Microphone Speaker GSM indicator light Working modes indicator light GPS indicator light SOS Button Necklace holder
4 3.2 Rear Face 3.3 Interior Battery SD Card SIM Card Battery back cover
5 4 Specs. Content Specs. Dim. 80MM*56MM*22MM Weight 50g Network GSM/GPRS Band 850/1800/1900Mhz or 900/1800/1900Mhz GPS chip SIRF3 chip GSM/GPRS module Siemens MC55 or Siemens MC56 GPS sensitivity -159dBm GPS accuracy 5m Time To First Fix Reacquisition 0.1s Cold status 45s Warm status 35s Hot status 1s Battery DC5V input Battery Chargeable changeable 3.7V 800mAh Li-ion battery Standby 100hours Storage Temp. -40°C to +85°C Operation Temp. -20°C to +55°C Humidity 5%--95% non-condensing 5 SIM card installation Make sure that there is no call transfer and call display is on, and PIN code off. Steps 1. Open the Battery back cover 2.Open the SIM card slot and SD card slot,and put one SIM card and one SD card
6 Pull leftwards and insert the simcard Fasten downwards ,make sure the SD card is mounted Push downwards to open the cover After SD card is mounted，Fasten the simcard rightwards
7 6 Startup z Put the SIM card and SD card in place,install batteries locator will automatically boot. z After startup middle green quickly ablaze, left GMS yellow colored long bright 2 seconds, right of GPS blue lights for not bright, and 20-30 seconds in the middle of the green light will shine out 1 second for 3 seconds left GMS parade every 3 seconds, a shiny for GSM now working normally. z about 40 to 90 seconds later, this product will be receiving GPS signals on the right of the blue lights began bright 1 second destroy 3 seconds, when this product blue when the light is you can play the following Settings. (note: blue lights on time with the current GPS signals about, the current not GPS signals blue lamp will not bright. 7 Usage The tracker has three working modes: Tracking mode，Monitor mode , Double-way Commnication mode ,Modes switch between “Tracking”, “Monitor” and “Double-way Commnication”. When power on the tracker, the default mode is “Tracking” mode, you can send “monitor+password” to switch to Monitor mode, or send “talk+password” to switch to Put the battery Fasten the cover upwards
8 Double-way Commnication mode, or “tracker+password” back to Tracking mode. 8 Track Modes 8.1 Initialization Send “begin123456” to the product, it will reply “begin ok” and initialize all the settings. 8.2 Change the Password Send SMS “password+old password+space+new password” (default password: 123456), it will reply “password ok” 8.3 Authorization 8.3.1 Send SMS “admin+ password+ space+ cell phone number”to set the first authorized number, it will reply “admin ok”, The other authorized numbers should be set by the first authorized number.(PS: There are only 5 numbers able to be authorized) From:13188888888 password ok TO:13188888888 begin123456 TO:13188888888 password123456 888999 From:13188888888 begin ok
9 8.3.2 Send SMS noadmin+password+space+authorized number to cancel the authorized number. 8.3.3 When an authorized number send SMS or dials up the unit, it will reply as below: Lat: 22.566901 long: 114.051258 speed: 0.00 14/08/09 06.54 F:3.85V,1,Signal:F imei:354776031555474 05 43.5 460 01 2533 720B Lat: 22.566901 long: 114.051258== Coordinate 0.00 === speed 14/08/09 06.54== Date&Time F:3.85V == battery power 1 == charging 0 means no charging Signal:F ==== Full GPS signal 0 means weak GPS signal 354776031555474== IMEI 05=quantity of satellites ( from 3 to 12 ) 43.5=Altitude 460 = MCC Mobile Country Code 01 == MNC Mobile Network Code 2533= LAC Location area code
10 720B= Cell ID 8.4 Auto-Track This function is using for the user to receive SMS with Geo-info in a certain time. 8.4.1 Set up: Send SMS t030s005n+password to the unit, it will report the Geo-info at 30s intervals for 5 times.(s: second, m: minute, h: hour).You will receive a reply as “t030s005n OK” if the setting is successful.The setting must be in 3 digits and at maximum 255 in value. 8.4.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times. You will receive a reply as “t030s005n OK” ( t030s***n ok ) if the setting is successful. 8.4.3 Cancel: Send notn+password to delete the “ auto track “,it will reply “notn ok”。 Remark: the interval must not be less than 30s. From:13188888888 Notn ok From:13188888888 T030s***n ok TO:13188888888 Notn123456
11 8.5 Tlimit Function 8.5.1 Send “tlimit123456 50” (50 to restrict send distance, 1-6000M set), reply “tlimit ok” (note: this function should coordinate with automatic positioning used together). Set up this function after locator to get out of setting distance will send a positioning information, such as not ambulate won't send information, so can "province user information costs. 8.5.2 Send” tlimit123456 0 “for close distance limit function, reply” tlimit ok”. 8.6 GPS-refresh setting Send SMS “GpsAutoSearch123456 120”，it will reply “GpsAutoSearch ok”. The tracker will search gps signal in 120s interval after setting this. The refreshing time is between 120-600 seconds(120<interval <600) (note: Longer standby time for longer refreshing time and shorter standby time for shorter refreshing time.) 8.7 Reboot remotely When using the region GPRS signal not, causing GPRS stuck not while sending data can be sent restart123456,locator received within 3 minutes after the restart a shutdown automatically. 8.8 Geo-fence Set up a geo-fence for the unit to restrict its movement within a district. The unit will send message to the authorized numbers when it moves out of this district. Notes: This function will be invalid if the unit moves outside the district. You need to re-set it if you want this function again. 8.8.1 Setup:Send SMS stockade+password+space+longitude,latitude; longitude,latitude to the unit to set the restricted district. Remark :The first longitude & latitude is coordinate of the top left corner of the
12 Geo-fence, while the second longitude & latitude is the coordinate of the bottom right corner. It will reply stockade ok。 8.8.2 Cancel:Send SMS “nostockade+password” to deactivate this function.It will reply “nostockade ok”。 This function will be out of effect after the unit moves outside the district. 8.8.3 Response SMS format: stockade!+geo-info. It will alarm one time in each setting. TO:13188888888 stockade123456 114.124845e,22.567185n;114.777888e,22.555666n From:13188888888 stockade ok From:13188888888 lat: 22.566923 long: 114.051331 speed: 0.00 28/11/10 03:33 F:4.32V,0, Signal:F stockade imei:359587011016261 05 41.5 460 01 2533 720B From:13188888888 nostockade ok TO:13188888888 nostockade123456
13 8.9 Movement Alert This function is using for the owner to get alarm when the tracker moves out of a restricted district. 8.9.1 Setup: Send SMS move+password to the unit to set the movement alert,it will reply move ok 8.9.2 Cancel: Send SMS nomove+password to deactivate the movement alert,it will reply move ok This function will be invalid after getting one movement alert Response SMS format: :move!+geo-info. It will alarm one time in each setting. 8.10 Overspeed Alert: TO:13188888888 move123456 From:13188888888 move ok From:13188888888 lat: 22.566923 long: 114.051331 speed: 0.00 28/11/10 03:33 F:4.32V,0, Signal:F move imei:359587011016261 05 41.5 460 01 2533 720B
14 This function is used to control the user’s driving speed. 8.10.1 Setup: Send SMS speed+password+space+ the speed, For example: speed123456 080,it will reply” speed ok” 8.10.2 Cancel: Send SMS”nospeed+password “to deactivate the overspeed alert,it will reply” nospeed ok。” Response SMS format: speed+080!+Geo-info (suppose the speed is 80km/h). The tracker will check the speed in 3 minutes interval and alarm if it is overspeed. TO:13188888888 speed123456 080 From:13188888888 speed ok TO:13188888888 nospeed123456 From:13188888888 nospeed ok From:13188888888 lat: 22.566923 long: 114.051331 speed: 0.00 28/11/10 03:33 F:4.32V,0, Signal:F speed imei:359587011016261 05 41.5 460 01 2533 720B
15 Remark: It is recommended that the speed alarm is set at not less than 80km/h. in order to make this function accurate 8.11 IMEI Checking: Send SMS” imei+password: to the unit,it will reply imei350001122222222 ok. 8.12 Time Zone setting Send “time zone+password + GMT time ,reply “time zone ok”. (note: if GMT time is positive, just write the number 1. If time zone is negative, have to write –1) 8.13 SOS Button Press the SOS for 3 second, it will send “help me !+ Geo-info” to all the authorized numbers every 3 minutes. It will stop sending such a SMS when one of the authorized TO:13188888888 imei23456 From:13188888888 imei350001122222222 ok TO:13188888888 Time zone23456 1 From:13188888888 time zone ok TO:13188888888 Time zone23456 -1
16 number reply SMS ” help me+password” to the tracker. (note: the default software only send one SOS alert. Pls contact with our company for the firmware with several SOS alerts ) 8.14 SMS LINK 8.14.1 Send “smslinkone+password”, This product will reply a GOOGLE link to admin number.The position can be checked directly for one the smartphone Format ：http://maps.google.com/maps?f=q&hl=en&q=22.567610,114.051227&speed: 0.00 12/11/10 14:36 F:4.22V Signal:F imei:012207000691839 8.14.2 Send “smslink123456”, it will reply “smslink OK” . The tracker will send the following SMS format always. http://maps.google.com/maps?f=q&hl=en&q=22.567610,114.051227&speed: 0.00 12/11/10 14:36 F:4.22V Signal:F imei:012207000691839 8.14.3 Send “smstext123456”, it will reply “smstext OK”. The tracker will reply normal SMS format for this command 8.15 SMS ONE Send “smsone+password”.The tracker will reply one SMS to admin number or gprs server. The same function with real-time tracking, but no need to call just send this command 8.16 Low Battery Alert When the battery inside is less than 3.7 V, it will send low battery alert to admin number
17 8.17 SMS Center ( or appointed number) 8.17.1 Setup: Send SMS adminsms+password+space+cell phone number to setup the SMS center. The tracker will reply Geo-info & authorized number to sms center number even if the admin numbers call or send command to the tracker 8.17.2 Cancel: Send SMS noadminsms+password to cancel the SMS center. Response SMS format: authorized number+Geo-info Note: ◆The SMS message must in Text format, can’t be identified for PDU format. ◆Please use the tracker outside for the first time so that It can get gps signal easily and quickly 8.18 GSM ID（this function can be add or delect for customization.） GSM ID are in each sms or gprs data. The tracker can be found by GSM ID without gps signal. But the customers have to ask their GSM operator for data base of the GSM ID. 8.19 Motion Sensor（This function is used to protect the vehicel or tracker when it is touched.） 8.19.1 Setup: Send shake+password+space+1-10 to the tracker to set up this function.(1-10 means the level of intensity) 8.19.2 Send SMS shake+password+space+1 is the least sensitivity . Have to shake the tracker strongly to get the alert. 8.19.3 Send SMS shake+password+space+10 is the most sensitivity . Have to shake the
18 tracker slightly to get the alert 8.19.4 Cancel: Send SMS shake+password+space+0 to remove this function. 8.20 SD card function A mini SD card can be put in the tracker’s SD card slot. The GPRS data can be saved in the SD card if GPRS is off. It will send data to the GPRS server again if when is on. 8.20.1 Setup: Send SMS sdlog+password+space+1 to activate the sd card-saving function Cancel: Send SMS sdlog+password+space+0 to the tracker to deactivate this function 8.20.2 Setup: Send SMS readsd+password+space+1 to ask the tracker to send data in the SD card to the GPRS server. Cancel: Send SMS readsd+password+space+0 to ask the tracker to stop sending data in the SD card to the server. 8.21 Switch on/off 8.21.1 Switch off Press TALK button and SOS button for three seconds, the green indicator will flash quickly until it is off. 8.21.2 Switch on Press TALK button and SOS button for three seconds, the green indicator will flash quickly until it is on. 9 Monitoring Mode(voice surveillance mode)
19 Send SMS monitor+password, the tracker repllies “monitor ok” then the tracker will get through automatically when you call and listen to it 10 Talking mode 10.1 Send “talk+password”，it will reply “talk ok”， When authorized numbers call to the tracker, it will ring several tones and get through automatically to double-communicate 10.2 Send “volume+password+60” ,it will reply “volume ok” The volume can be set between 0 to 99 to make the volume louder or lower 10.3 Dial authorized numbers automatically TALK button can be pressed for 3 seconds until it stops flashing quickly to get help from the authorized numbers in emgency. The tracker can call to the authorized numberes one by one and you can hear the calling. The tracker will stop calling if any authorized number picks up the calling. 10.4 Press TALK button for 3 seconds to cancel the double-communication or authorized number-calling 11 GPRS setting APN(access point name), IP, PORT have to be set up for gprs function. Apn user, apn password have to be set up also if there are. So please contact with the gsm operator for them
20 11.1 Set GPRS protocols 11.1.1 Set TCP protocols:Send SMS Gprsmode+password+space+0 to set up TCP protocol, tracker will reply GPRSMODE ok。 (note: TCP is the default mode in the firmware) 11.1.2 Set UDP protocols: Gprsmode+password+space+1 to set up UDP protocol, tracker will reply GPRSMODE ok。 11.2 Set IP address and port: Setup: adminip+password+space+IP address+space+port. If setup successfully, the tracker will reply SMS “adminip ok” Cancel: Send SMS noadminip+123456 11.3 Set APN Setup: Send SMS apn+password+space+specify apn content. If setup successful, the tracker will reply SMS “APN ok”. Cancel: The old APN will be invalid automatically when a new APN is set. 11.4 Set APN’s User Name Setup: Send SMS apnuser+123456+space+the sim card’s user name. Send SMS apnuser+123456+space+the APN's user name If setup successful, the tracker will reply SMS “apnuser ok”. Cancel: The old APN user name will be invalid automatically when a new APN uer name is set. 11.5 Set APN’s Password Setup: apnpasswd+password+space+the sim card’s password. If setup successful, the tracker will reply SMS “apnpasswd ok”.
21 Cancel: The old APN password will be invalid automatically when a new APN password is set. 11.6 GPRS setting The tracker will hang off the calling in gprs mode when authorized number calls to the tracker, then send gprs data to the server. GPRS Format explain: serial number, the authorized number, GPRMC data, GPS signal( F is strong L is weak), alarm information, imei , satellite numbers ,altitude, battery power (F is full,L is weak) ,charging state( 1 charging ,0 no charging) ,byte numbers, checksum, MCC, MNC,LAC, CELL ID GPRS format： 100312033421,13145826175,GPRMC,033421.851,A,2234.0209,N,11403.0733,E,1.87,347.73,120310,,,A*62,F,help me, imei:354776036842240,03,73.5,F:4.14V,0,138,46772,460,01,2533,720B 12 Cautions Please comply with the instructions to extend the unit life: 1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry. 2. Don’t use & store the unit in dusty places. 3. Don’t put the unit in overheated or overcooled places. 4. Handle carefully. Don’t vibrate or shake it violently. 5. Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent. 6. Don’t paint the unit, this may cause some foreign materials left in between the parts. 7. Don’t disassemble or refit the unit.
22 8. Please use the battery and charger provided by manufacturer. Using other batteries and chargers will cause unwanted situation. 9. Don’t dismount the antenna randomly, or use other antennas. This may interfere the transmission, and increase the radiation as well. 13 Faults & Solutions Faults Solution Startup Fail Check the battery and see if it is fully charged or correctly installed. Hangup Fail Check if the unit received GPS signal or not,or if the SIM card there iscalling display or not. Monitor Fail Check if the authorized number is setup or in the coverage of signals. Location report in digits of zeros. Don’t use it in the place beyond reach of signals. Place the unit outdoors, especially when starting it up. (Remark: There are two ways for the times of sending alarm in each setting.one time and heap of times,which is according to the customer’s requirements, this product also support platform issued instructions and computer USB send set, its instruction set instruction with SMS instruction)
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types XT107 (FCC ID: Z6VXT107) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.304W/kg and when properly worn on the body is 0.343W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. NOTE 3: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Navigation menu