Xi an NovaStar Tech PBOX150 Dual-mode Multimedia Player User Manual
Xi'an NovaStar Tech Co., Ltd Dual-mode Multimedia Player Users Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3279985 |
| Application ID | PBgSRFXer1acKf75c7nlzg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 302.13kB (3776666 bits) |
| Date Submitted | 2017-02-10 00:00:00 |
| Date Available | 2017-02-12 00:00:00 |
| Creation Date | 2016-10-09 18:44:58 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2016-10-09 18:45:18 |
| Document Title | Users Manual |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | ZOE |
,. L TE VA User’s Manual Dual-mode Multimedia Player PBOX150 Rev1.0.0 NS120100107 Statement Welcome to use the product from Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as “NovaStar”). It is our great pleasure to offer this manual to help you understand and use the product. We have striven for precision and reliability during the compilation of this manual. The contents of this manual are subject to change without notice. If you have any problem in use or you have any suggestion, please feel free to contact us according to the contact information provided in this manual. We will do our utmost to satisfy your needs. We would like to express our sincere thanks to your suggestions and make assessment for adoption as ,. L soon as possible Copyright All the intellectual property rights involved in this document belong to NovaStar. Unauthorized duplication is a violation of applicable laws. Trademark TE is the registered trademark of NovaStar. VA FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, ,. L pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is TE encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. VA —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm 'I A between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Dual-mode Multimedia Player PBOX150 User’s Manual TABLE OF CONTENTS BRIEF INTRODUCTION OF PBOX150 ................................................................................................................ 5 APPEARANCE .................................................................................................................................................. 6 NETWORK CONNECTIONS ..................................................................................................................... 7 3.1 NETWORK CABLE ................................................................................................................................................ 8 3.2 LAN ..................................................................................................................................................................... 8 3.3 WIFI ..................................................................................................................................................................... 9 3.3.1 Mode I: WiFi control card does not connect with external network ................................................................ 10 3.3.2 Mode II: connect the WiFi card with external network by wireless network .......................... 11 3.3.3 Mode III: connect the WiFi card with external network by network cables ............................ 12 3.3.4 Mode IV: WiFi card opens the bridge connection mode ............................................................. 13 3.4 ,. L IP SEARCHING .................................................................................................................................................. 14 TE ADVANCED LOGIN..........................................................................................................................................15 SOFTWARE INSTALLATION .............................................................................................................................16 OPERATION FLOWCHART ...............................................................................................................................16 SWITCH OF PLAY MODE .................................................................................................................................16 OPERATION OF ASYNCHRONOUS PLAY MODE ..............................................................................17 OPERATION OF SYNCHRONOUS PLAY MODE .................................................................................17 VA 10 SCREEN CONFIGURATION BY APPLYING NOVALCT-PLUTO ....................................................17 10.1 START LED DISPLAY BY RECEIVING CARD CONFIGURATION FILES ..................................................................... 18 10.2 START LED DISPLAY MANUALLY ....................................................................................................................... 20 'I A 10.2.1 10.2.2 11 Smart setting ............................................................................................................................................ 20 Screen configuration .............................................................................................................................. 24 PROGRAM EDITING AND PUBLISHING BY APPLYING PLUTOMANAGER ..........................................................29 11.1 EDITING PLAY PROGRAM .................................................................................................................................. 30 11.2 EDITING SIGN LIST ............................................................................................................................................ 32 11.3 SETTING THE SIZE OF DISPLAY WINDOW........................................................................................................... 32 11.4 CONFIGURING PLAYLIST DIRECTORY ................................................................................................................. 33 11.5 PUBLISH ............................................................................................................................................................ 34 11.5.1 Online publish .......................................................................................................................................... 34 www.novastar.tech Dual-mode Multimedia Player PBOX150 User’s Manual 11.5.2 Offline export ............................................................................................................................................... 38 11.5.3 Publish temporary content ........................................................................................................................... 38 11.5.4 Immediate notification................................................................................................................................. 39 12 REMOTE CLUSTER PLAY& CONTROL SYSTEM ..................................................................................................41 13 SPECIFICATIONS .............................................................................................................................................43 ,. L TE 'I A VA www.novastar.tech Dual-mode Multimedia Player PBOX150 User’s Manual 1 Brief Introduction of PBOX150 In order to support traditional digital signage and provide a better entry into full-color LED display industry for clients to carry out media business, NovaStar has launched dual-mode media player PBOX150. Synchronous and asynchronous dual-mode switch is supported, which has made it more convenient for clients to use. 1) ,. L Synchronous and asynchronous dual-mode and supporting full zoom of video input in synchronous mode; 2) Supporting HDMI Loop; 3) Supporting WiFi function to enable wireless communication; 4) WiFi function supports AP+Sta at the same time and you can build your LAN while connecting public network; 5) TE Supporting load capability of 600,000 and maximum width of 2048 and maximum height VA of 1024; 6) Supporting redundancy backup of Gigabit Ethernet port; 7) Supporting audio output with stereo dual-channel; 8) Supporting local USB drive playing; 9) 'I A Supporting local USB drive playing of imported program; 10) Supporting three ways of brightness adjustment: timing adjustment, automatic adjustment and manual adjustment; 11) Supporting screen lock and blackout; 12) Supporting screen on/off via power; 13) Supporting SD card memory expansion; www.novastar.tech Dual-mode Multimedia Player PBOX150 User’s Manual 14) Supporting remote cluster control and play via Internet; 15) Supporting various media formats such as analog clock, animation, picture, text, scrolling text, digital clock, positive and negative timing, Chinese traditional calendar etc; 16) Supporting playing with transparent background; 17) Supporting chips: driving IC of Macroblock, CHIPONE, Sumacro, Mingyang, IT, Bright Way, Hangzhou Silan etc. supported in cascading mode; ,. L 18) Support full-color static to 32 scan; 19) Field frequency of 60Hz; 20) Settable gray level and supporting a maximum gray level of 16bits 65536 grades; TE 21) Refresh frequency: scanning screen can achieve 3840Hz and static screen can achieve 6000Hz; 22) Supporting brightness and chroma calibration; 2 Appearance 'I A 23) Able to connect function card MFN300; Audio and video Switching VIDEO SWITCH Light on in HDMI mode and off in asynchronous mode. WiFi Connecting antenna SD CARD Plugging SD card www.novastar.tech Dual-mode Multimedia Player PBOX150 User’s Manual 100~240AV.50/60Hz Power interface Default IP Default IP of PBOX150 is: 192.168.0.220 PWR&RUN Status PWR: power indicator indicator RUN: signal indicator the Internet. USB USB interface for mainstream USB drive RESET Reset button TEMP interface for temperature sensor LIGHT interface for light sensor HDMI IN HDMI input HDMI LOOP HDMI Loop output TE VA AUDIO OUT Audio output LED OUT 'I A ,. L 100M interface connecting to control computer or to LAN/WAN BACKUP Gigabit Ethernet port, LED output Gigabit Ethernet port, LED backup output 3 Network Connections PBOX150 can be connected to play& control computer through three modes: network cable, LAN and WiFi. www.novastar.tech Dual-mode Multimedia Player PBOX150 User’s Manual 3.1 Network cable ,. L Fig. 3-1Network cable 3.2 LAN TE 'I A VA Fig. 3-2 LAN www.novastar.tech Dual-mode Multimedia Player PBOX150 User’s Manual 3.3 Wifi Tips: 1) Please do not directly switch PSD100-WiFi into local area networks by network cables at the time of DHCP opening. As the DHCP of this card will conflict with the DHCP service for routers in the local area network at the time of opening and meanwhile, IP addresses will be distributed simultaneously. 2) ,. L When the PSD100-WiFi switches into routers, Huawei, TP-link, Tenda and net gear brands are recommended for the guarantee of stability. 3) When the bridge feature is used, the superior router under bridge connection shall have TE the WDS function, otherwise, bridge connection will fail. Mutual bridge connection can be realized among PSD100-WiFi systems and for superior router, it is allowed to pre-confirm whether the WDS of the superior router can be enabled. The mode is generally enabled. VA 4) The default factory settings of control card are that DHCP service is disable. 5) The default factory settings of control card are that router mode, users could select the bridge mode according network interface，long press the WiFi module reset button to 'I A restore factory settings. www.novastar.tech Dual-mode Multimedia Player PBOX150 User’s Manual 3.3.1 Mode I: WiFi control card does not connect with external network ,. L TE Tips: In this case, devices at the distribution and management terminals cannot get on the internet. 1) Connect PSD100-WiFi to user computers by network cables; 2) Set computer's IP address as static IP: 192.168.10. *; 3) Open the browser and input 192.168.10.1 in the address bar, to enter the setting interface 'I A VA of wireless routers. Both the Login User and the password are admin by default. Enter the DHCP server >DHCP service and open DHCP services; www.novastar.tech 10 Dual-mode Multimedia Player PBOX150 User’s Manual 6) Use mobile device to search the hot spots of the WiFi module for connection: The SSID is nova****** (check information label) and the default password is 0123456789. 3.3.2 Mode II: connect the WiFi card with external network by wireless network ,. L TE VA 1) Set computer's IP address as static IP: 192.168.10. *; 2) Open the browser and input 192.168.10.1 in the address bar, to enter the setting interface of 'I A wireless routers. Both the Login User and the password are admin by default. Enter the DHCP server ->DHCP service and open DHCP services. Conduct wireless setting -> scanning hot spots and decide the spot for connection: www.novastar.tech 11 Dual-mode Multimedia Player PBOX150 User’s Manual 3) The connection status is displayed as connected (see the Figure above), when it is allowed to ,. L use mobile device for searching the hot spots of the WiFi module for connection: The SSID is nova****** (check information label) and the default password is 0123456789; 3.3.3 Mode III: connect the WiFi card with external network by network cables TE 'I A VA Note: Please close the DHCP service before setting wireless network parameters. Connect PSD100-WiFi to external routers by network cables and then use mobile devices for WiFi hot spots searching: The SSID is nova****** (check information label) and the default password is 0123456789; www.novastar.tech 12 Dual-mode Multimedia Player PBOX150 User’s Manual 3.3.4 Mode IV: WiFi card opens the bridge connection mode ,. L TE Note: Please close the DHCP service before setting wireless network parameters. 1) Open the browser and input 192.168.10.1 in the address bar, to enter the setting interface of wireless routers. Both the Login User and the password are admin by default. Upon successful login, configure the Relay mode -> Bridge connection; 'I A VA 2) After configuration, reset computer IP as automatic acquisition, select Wireless setting -> Scan hot spots and determine the hot spot for connection. The topological graph of bridge connection mode is as shown below; Note: Please refer to the PSD100-WiFi User Guide for mode bridge connection schemes. www.novastar.tech 13 Dual-mode Multimedia Player PBOX150 User’s Manual 3.4 IP Searching Run Nova LCT-Pluto on play& control computer, click System->Search All Display(s); ,. L TE 'I A VA Fig. 3-3 Searching Pluto system Double click on the display and the operation interface of IP modification will shown. You can modify IP address directly or choose to obtain IP automatically. Click Send after setting is completed. www.novastar.tech 14 Dual-mode Multimedia Player PBOX150 User’s Manual 4 Advanced Login Select the display to be connected from the list you have searched and click connect display; ,. L TE Fig. 4-1 Connect display Click User ->Advanced Login and then enter the password: “admin”, click Login; 'I A www.novastar.tech VA Fig. 4-2 Advanced Login 15 Dual-mode Multimedia Player PBOX150 User’s Manual 5 Software Installation Click the link below to download higher versions of NovaLCT-Pluto V4.5.1, the configuration software of display screen: http://www.novastar-led.cn/xzzx/rjzl/dssxt//rjzl/ybxt/62.html Click the link below to download higher versions of PlutoManager V4.5.1,the play& control software :http://www.novastar-led.cn/xzzx/rjzl/dssxt//rjzl/ybxt/63.html Cluster management: Click the link below to download service platform NovaCloud and central management http://www.novaicloud.com/ 6 Operation Flowchart ,. L software Mc-go TE 'I A VA 7 Switch of Play Mode PBOX150 supports synchronous and asynchronous modes of playing. In addition, these two modes could switch quickly from one to the other. www.novastar.tech 16 Dual-mode Multimedia Player PBOX150 User’s Manual The video source of PBOX150 is HDMI input in synchronous play mode. Program editing and sending need to work together with play& control software PlutoManager in asynchronous play mode The following two methods for switching of play mode are provided to select: Methods I: Switching by button. Press “SWITCH” on the front panel of PBOX150 and the indicator light is on showing the current play mode is switched to synchronous. ,. L Methods II: Switching by software. Run Nova LCT-Pluto. Click “Screen Configuration” under Settings and then select input source configuration. Note: PBOX150 will default to synchronous mode after power on if HDMI input source has the access to signal. TE 8 Operation of Asynchronous Play Mode VA Run play& control software PlutoManager on control computer to set program window, edit mode and send. (Please view the operating steps in 10 Program Editing and Publishing by Applying PlutoMnager). 'I A 9 Operation of Synchronous Play Mode HDMI input source could obtain images on computer automatically and keep synchronous with computer display. Then edit program on computer to play in real time. 10 Screen Configuration by Applying NovaLCT-Pluto This chapter is only an introduction of the basic configuration of display screen. Please view the www.novastar.tech 17 Dual-mode Multimedia Player PBOX150 User’s Manual operating instructions of NovaLCT-Pluto in NovaLCT-Pluto User's Manual. Run Nova LCT-Pluto on the computer. 1) Click System(S)→Search All Display(S). LCT will search current connected display. The result is shown as below and click Connect Display. ,. L TE Fig. 10-1 Searching and linking display 2) VA Advanced login. The initial password is: admin. 'I A Fig. 10-2 Advanced login 10.1 Start LED display by receiving card configuration files Precondition: There are saved configuration files in advance or ask display provider and Nova www.novastar.tech 18 Dual-mode Multimedia Player PBOX150 User’s Manual for configuration files. Advantage: start display by configuration files without setting by users. ,. L Enter “Scan Board” interface and click “Load File” to import configuration file of scan TE board in .rcfg format. Click “Save to Screen” and the data won’t lost if the power is terminated. 'I A VA Fig. 10-3 Starting LED display by configuration files of scan board www.novastar.tech 19 Dual-mode Multimedia Player PBOX150 User’s Manual 10.2 Start LED display manually 10.2.1 Smart setting ,. L TE 'I A VA www.novastar.tech 20 Dual-mode Multimedia Player PBOX150 User’s Manual ,. L TE Data types: VA Module chip: select driving chip type used by cabinets at present such as common chips, MBI5036 and MBI5042 etc. OE Polarity: this option can be High Effective, Low Effective or Unknown. Module type: the option can be regular module or irregular module. (Irregular module is not 'I A supported by this version) Actual Pixel: this is the size of the real pixel array of a module. X represents the width and Y the height. Decoding type: the options can be Static, 74HC138 Code or Straight Decoding, choose according to the type of LED display module actually used. Scan Type: the options could be any scan rate between 1 scan and 1/16 scan or unknown. Rows and columns of the Module in one scan board (also called receiving card): this is the size of the module array in the cabinet which is being configured by smart setting. Module Cascade Type: select the corresponding option according to the module connection www.novastar.tech 21 Dual-mode Multimedia Player PBOX150 User’s Manual routing. Notice: 1) If the rows and columns of load module of scan board is set as the default (1 column, 1 row), modules in the first row of all cabinets will be lightened. 2) Fill in according to the specifications of cabinet and the last modules of the first row of all cabinets will be lightened. ,. L Notice: This step will be skipped if module OE polarity is known and set in Smart Setting Step 1. TE 'I A VA Fill in Smart Setting Step 4 according to actual situation and then click Next. Enter step 5 if Scan Type is not selected in step 1. If selected, software will skip this interface. www.novastar.tech 22 Dual-mode Multimedia Player PBOX150 User’s Manual Fill in Smart Setting Step 5 according to actual situation and click Next to enter “Smart Setting Step 9”. Then click the grid on computer corresponding to the lighted grid on ,. L module. Another grid will be lighted on the module after clicking one grid and then click next grid as the figure below. TE 'I A VA Fig. 10-4 Smart Setting Notice： Press left button and drag the mouse to accomplish quick routing drawing. Use “Automatic” button to accomplish drawing routing lines of the same pattern. A prompt box will pop up to remind the completion of scanning after it is completed according to the display screen. Click Finish button and the dialog of Save module will pop up. Please save www.novastar.tech 23 Dual-mode Multimedia Player PBOX150 User’s Manual module to file or to database if it is necessary for the convenience of quick start the display screen with same module next time. Then click Save. Click Finish directly if it is not necessary to save. ,. L Fig. 10-5 Save module information 10.2.2 Screen configuration TE Click “Screen configuration” on the main interface to enter the interface of “Send board”. 10.2.2.1 Input source configuration VA Asynchronous will be used when HDMI Input Source is not checked as shown below. 'I A www.novastar.tech 24 Dual-mode Multimedia Player PBOX150 User’s Manual Synchronous mode will be used if HDMI Input Source is checked as shown below. Resolution of input source can be set now. ,. L TE Fig. 10-6 Resolution settings HDMI input: video source as a way for HDMI input get the connection to images from PC. VA Play box display mode setting: Fixed resolution: the required resolution can be chosen from the provided groups of built-in resolution. Custom resolution: users can customize the resolution of player according to the quality of 'I A image. PBOX150 will default to synchronous mode after power on if HDMI priority is enabled. 10.2.2.2 Screen configuration Screen can be divided into three types: simple screen, standard screen and complex screen. The following part is the introduction of the settings of three different types of screen. a) Simple screen configuration Simple screen refers to each scan board with same load capability. Edit the options of the www.novastar.tech 25 Dual-mode Multimedia Player PBOX150 User’s Manual interface in the figure below according to the actual situation of the screen. ,. L TE Fig. 10-7 Simple screen configuration Send board mode: if checked, asynchronous board without loading cabinet work as the VA cascading scan board of send card. Side channel mode: if checked, switches between synchronous system and asynchronous 'I A system when display screen is connected to asynchronous system and synchronous system. For example, images of synchronous system will be displayed when asynchronous system is switched off, and vice versa. Images connected earlier will be displayed when two systems are switched off. Configure More screens: if checked, more screens can be configured. Load file：Load files of the saved screen information from control computer. Save file: save screen configuration information as screen information file (*.scr) Send to hardware: send screen configuration information to asynchronous card of PBOX150. Save to screen: save all hardware parameters to flash in case of loss after the power is www.novastar.tech 26 Dual-mode Multimedia Player PBOX150 User’s Manual terminated. Coordinates： set the initial map position. The default initial position is (0,0) which is the coordinates (0,0) on the top left corner of the mapping display. Virtual mode: choose the screen with virtual pixel or real pixel. Virtual pixel includes three lights and four lights. Columns and rows of scan board: input based on real display modules. ,. L Width, Height: single board pixel and in accordance with cabinet setting on the page of scan board. b) Standard screen configuration TE Manually set the Module Cascade Type and the load capability of each scan board can be different. 'I A VA Fig. 10-8 Standard screen configuration Coordinates： set the initial map position. The default initial position is (0,0) which is the coordinates (0,0) on the top left corner of the mapping display. www.novastar.tech 27 Dual-mode Multimedia Player PBOX150 User’s Manual Virtual mode: choose the screen with virtual pixel or real pixel. Virtual pixel includes three lights and four lights. Column number, Line number: input based on real display modules. Software interface will show the plane figure shown as above. Reset all: reset all cable connections and cabinet setting. Undo current Ethernet port: undo all setting related to current Ethernet port. ,. L Width: width of scan board load capability Height: height of scan board load capability Apply to current Ethernet port: Set all the size of all cabinet connected to current Ethernet port as current width and height. TE Space position：Check to leave a space to current position. Relay: the pixel of current scan board is 0. VA Methods of standard screen setting: Define scan board connected to Ethernet port as the 1st board and input corresponding data. The set the board connected to the 1st board as the 2nd board and input corresponding data. The setting will complete clicking just as the same analogy. 'I A Pixel of any scan board can be same or different. Or choose to leave a space position and then send to save in scan board or computer. c) Right click to cancel current scan board. Complex screen configuration Set the corresponding initial coordinates and pixel of load capability of each scan board respectively. www.novastar.tech 28 Dual-mode Multimedia Player PBOX150 User’s Manual ,. L TE Fig. 10-9 Complex screen configuration Add: a new window pop up and the initial coordinates and load pixel of each scan board can be set. VA Edit: edit added information of scan board. Delete: delete the selected information of scan board from the list. 'I A 11 Program Editing and Applying PlutoManager Clear: clear all scan boards in the list which has been set. Publishing by Click 【Search Now】on the main interface of PlutoManager to search LAN terminals, specified IP terminals and part of terminals of LAN. Searched terminals could be added to specified groups. www.novastar.tech 29 Dual-mode Multimedia Player PBOX150 User’s Manual Fig. 11-1 Searching display 11.1 ,. L Editing play program Select edit mode. TE VA Click Create Play List on the toolbar of PlutoManager main interface to enter the Play program creating page shown as below. 'I A www.novastar.tech 30 Dual-mode Multimedia Player PBOX150 User’s Manual ,. L TE Play program can be saved with the suffix of plpym. It is composed of several common segments. In addition, it also contains one or more inserted segments. The common segments and inserted VA segments are composed of one or more pages, and each page is composed of one or more windows. The windows can be divided into Common Window, Clock Window, Scroll Text Window, 'I A Countdown Timer Window, and Weather Window. The Common Window can add one or more different types of media. Play program structure is shown as follows. www.novastar.tech 31 Dual-mode Multimedia Player PBOX150 User’s Manual 11.2 Editing Sign list ,. L Click TE to open the main interface of Edit Play List. The interface is divided into many windows. Each window is named according to the functions as the following figure. 'I A VA Fig. 11-2 Page function distribution 11.3 Setting the size of display window Click to set play window information. www.novastar.tech 32 Dual-mode Multimedia Player PBOX150 User’s Manual Fig. 11-3 Play window information ,. L Size of play window: width and height can match the selected display and adjust automatically. Play window size Set size manually: Set based on the actual size of display screen. Select client: Select client from terminal list to directly read the size of terminal display. TE 11.4 Configuring playlist directory VA After clicking save in playlist editing page, playlist will be automatically saved to default directory (factory default: My Documents\NovaPluto\ PM-PlayList). Users can configure the 'I A directory of playlist. Re-configuration of playlist directory might cause unsuccessful playlist publishing. Therefore, users are recommended to read the contents of this section carefully. Operating steps of the configuration of playlist directory: Click Configuration button in the main interface of PlutoManager. The following window will pop up: www.novastar.tech 33 Dual-mode Multimedia Player PBOX150 User’s Manual Fig. 11-4 Configuration of playlist directory 11.5 Publish ,. L 11.5.1 Online publish 1) Click on the main interface of PlutoManager or directly click on Edit play list window to enter the interface of Play List Publish. TE 'I A VA Fig. 11-5 Play program publishing page Online publish is to publish play program to the storage space of terminal (online) via network. Operating steps: Refresh: click to view allcompeleted Play programs; www.novastar.tech 34 Dual-mode Multimedia Player PBOX150 User’s Manual Clear: delete all current Play programs and files; Delete: once deleted, all files related to Play program will be gone no matter converted or not; Send: send play program; Export: export Play program to USB drive. 2) Select play programs which is going to be converted. More play programs can be selected by pressing “Ctrl”. Right click mouse to choose “Convert” and the following window will ,. L pop up. Click ”Advanced” to set detailed parameters. Converting will depend on default parameters without advanced setting. TE Fig. 11-6 Convert video 3) Click the corresponding button of “Publish” after conversion of the play program to enter the interface below. 'I A VA Fig. 11-7 Conversion completed www.novastar.tech 35 Dual-mode Multimedia Player PBOX150 User’s Manual Select by client: Directly check the client (who’s online) which Play program will be sent to; Select by group: Publish Play program by group; ,. L TE Fig. 11-8 Choose the client to be sent System will choose to play by adopting self-adapting window if the size of terminal VA display and play program display is different and users still ask for sending play program, which may lead to distortion of the image on terminal display. 4) It is suggested to check “Pause client playing while sending media”. Set play program and 'I A send it to the storage location of terminal. Click “Next” to start sending and the interface after it has been sent is shown in the figure below. www.novastar.tech 36 Dual-mode Multimedia Player PBOX150 User’s Manual ,. L TE Fig. 11-9 Send related information 'I A VA Fig. 11-10 Send successfully www.novastar.tech 37 Dual-mode Multimedia Player PBOX150 User’s Manual 11.5.2 Offline export Offline export is to export current play program to USB drive and then connect the USB drive to terminal to play. Operating steps: 1) Click on the interface shown in Fig. 11-3 to enter setting interface of Offline export. ,. L TE Fig. 11-11 Offline export Play after copying to other storage devices: under this mode, Play programs and programs VA will be copied to selected storage device to play after connecting USB drive to client. Play without copying: under this mode, Play programs and programs will be played directly 'I A by Asynchronous system connecting to USB drive. 2) Click “Export” to export current play program to USB drive after setting completed. Fig. 11-12 Export completed 11.5.3 Publish temporary content Emergency insert play means to insert some media or Play programs which need to be played www.novastar.tech 38 Dual-mode Multimedia Player PBOX150 User’s Manual urgently on the client display during normal playing. Immediate play and delay play are optional by the degree of urgency. Delay time can be set freely. Click Publish Temporary Content to enter the emergency insert play page. ,. L TE VA Fig. 11-13 Publish Temporary Content Content type: file, playlist ：Click to import local files or Play program. 'I A Window size: size of the current client display; Play duration: total play time of inserted media file or play program. Start time: Immediate: inserted files of media or play program will be played immediately once successfully published; Delay: the playing will be delayed for a period of time that can be set after successful publishing. ：Click to send insert contents to specified terminals. 11.5.4 Immediate notification Immediate notification is mainly to publish some text information. Once published, the www.novastar.tech 39 Dual-mode Multimedia Player PBOX150 User’s Manual information will be played immediately on the terminal display prior to all other tasks. Return to the main interface of Play List Publish and click “Immediate Notification” shown as below: ,. L TE VA Fig. 11-14 Immediate notification Position: Position of immediate notification textbox on the display; Width: Textbox width ≤ window width; Height: Textbox height ≤ window height; Left edge: If the coordinates of upper left corner of the window is (0, 0), the left edge value 'I A is the distance between left edge of textbox and left edge of the window, i.e. x coordinate. Left edge ≤ window width - textbox width; Top edge: Upper edge value is the distance between the upper edge textbox and the upper edge of the window, i.e., y coordinate. Upper edge ≤ window height - textbox height; Play mode: Loop times: Set loop times of immediate notification Play duration: Play duration of immediate notification www.novastar.tech 40 Dual-mode Multimedia Player PBOX150 User’s Manual Text type: Scrolling text: Editable text, transparency, background, text effects, text color, font, loop, scrolling speed, play duration, etc. Single line text: Editable text, transparency, background, text effects, font, entrance/exit effects, retention time, etc. Static text: Editable text, transparency, background, paragraph, font, play duration, etc. Complex text: Text editor, transparency, background, entrance/exit effects, retention time, etc. ,. L ：Click this button to send immediate notification to specified terminals. 12 Remote Cluster Play& control system VA 'I A Provide the terminal display access to the Internet and register terminal on the service platform provided by Nova through browser. Terminal display could be remotely controlled through center management software to allow operations such as remote media and play program, monitoring of display status, remote control of display brightness and power switch etc. Nova display cluster management can be divided into three parts: service platform: NovaCloud(download link: http://www.novaicloud.com/), management centre software Mc-go(download link: http://www.novaicloud.com/), terminal control software synchronous system software is MarsSite while asynchronous system is embedded with terminal software. Network structure of cluster management program of Nova display is as the following figure: www.novastar.tech 41 Dual-mode Multimedia Player PBOX150 User’s Manual Following the operating steps below in remote cluster program: 1) TE Information register. Open cluster system websitehttp://www.novaicloud.com/ through browser to register a free account. 3) Software installation. Install MarsSite in synchronous system and Mc-go in management center. 2) ,. L VA Login of Cloud sever. System management according to groups which make it convenient for unified management and sending play program. 4) Configuration of terminal software including three parts: terminal setting, play setting and 'I A picture monitoring. 5) Programming, publishing, log management, picture monitoring, system monitoring and terminal monitoring in management center. www.novastar.tech 42 Dual-mode Multimedia Player PBOX150 User’s Manual 13 Specifications Input Power AC100 ~240V 50/60Hz Overall Power Consumption 15W Operating temperature -20℃ ~ 60℃ Storage temperature -40℃ ~ 80℃ Size 242×137.1×34（mm） Net weight 718g ,. L TE 'I A VA www.novastar.tech 43
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2016:10:09 18:44:58Z Creator Tool : Microsoft® Office Word 2007 Modify Date : 2016:10:09 18:45:18+08:00 Metadata Date : 2016:10:09 18:45:18+08:00 Format : application/pdf Creator : ZOE Title : X6系列快速使用说明 Producer : Microsoft® Office Word 2007 Document ID : uuid:68490d3b-8c1b-4c03-b634-4dc9028e1899 Instance ID : uuid:24570c07-8a19-4c78-9260-f1ff08696ab4 Has XFA : No Page Count : 44 Language : zh-CN Author : ZOEEXIF Metadata provided by EXIF.tools