Xiamen Haiwell Technology C7-W Human Machine Interface User Manual
Xiamen Haiwell Technology Co., Ltd. Human Machine Interface
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3719314 |
| Application ID | Moxy5DxaxOAjXpwdvedNuQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 23.31kB (291361 bits) |
| Date Submitted | 2018-01-19 00:00:00 |
| Date Available | 2018-01-19 00:00:00 |
| Creation Date | 2018-01-11 15:37:31 |
| Document Lastmod | 2018-01-17 11:53:25 |
| Document Title | Haiwell 海为HDç³»åˆ—äººæœºç•Œé¢ |
| Document Creator | WPS Office |
| Document Author: | User |
Haiwell C7-w/C10-w HMI Operation Manual Haiwell 1、The notes and installation steps for Haiwell HMI Notes: ·Installation direction must be in accordance with the requirement of this manual, the wiring should be in strict accordance with the guide of the terminal mark, otherwise it will cause product damage or burn up. ·There should be sufficient space and distance between the products and other devices to avoid damage to the equipment caused by poor heat dissipation. Installation steps： ·Fit the HMI into the cutout panel and lock the four buckles on the sides with the mount panel. 2、Haiwell HMI software ·Haiwell HMI uses the Haiwell scada software.You can download from haiwell official web：en.haiwell.com. ·Haiwell Cloud Service can be got by visiting haiwell cloud web （http://cloud.haiwell.com）We recommend you to use haiwell cloud APP. C10-w panel cutout C7-w panel cutout ·Haiwell Cloud APP download ways: （1）login in haiwell cloud web （2）Scan the two-dimension code in the right （3）Search "Haiwell cloud" in the IOS Iphone APP store 6、HMI calibration HMI is calibrated at the factory. If you need to recalibrate, enter the parameter setting interface, select "Hardware Setup> Display&Voice> Touch Calibration", the following interface will appear: 3、The interface definition of Haiwell HMI C7/C10 HMI interface definition COM1 interface definition Haiwell HMI COM2 interface definition Pin Definition Pin Definition Pin Definition Pin Definition RS422 TX+/RS485 A+ RS232 RXD RS232 RXD RS232 TXD RS232 TXD CANL GND RS485 B- GND RS422 TX-/RS485 B- RS485 A+ CANH RS422 RX- RS422 RX+ Touch crosshair to calibrate Click the upper left corner, the upper right corner, the lower right corner, the lower left corner, the center point of the '+' in turn, you can restart. 七、参数设置 7、Parameter setting 4、Product specifications Hold down the upper right corner of the screen for about 5-10 seconds, the following screen appears: Model C7-w HMI Contents C10-w HMI Simplified Chinese Input power 24VDC±20% 24VDC ±20% Power consumption 5W 9W Power isolation Built-in Built-in Isolation resistance Vibration resistance endurance Exceed 500MΩ@500VDC 10～25HZ (X、Y、Z direction 2G/30 minutes) Exceed 500MΩ@500VDC 10～25HZ (X、Y、Z direction 2G/30 minutes) Cooling type Ventilation cooling Ventilation cooling Protection IP65 IP65 Storage structure -20～70℃ -20～70℃ Operating temperature -10～60℃ -10～60℃ Relative humidity temperature Enclosure 10～90%RH（non-condensing） Engineering Plastic ABS （Flame-retardant level） 10～90%RH（non-condensing） Engineering Plastic ABS （Flame-retardant level） Dimensions 200×146×37mm 270×212×35mm Panel cutout 193×138mm 260×202mm Weight 0.74kg 1.2kg CE certification Comply with CE certification standard Comply with CE certification standard Power Environment Specification Certification Project Setting Hardware Setting System Information Local Project, Network Project Network settings, Display&Voice, Time Settings, Machine, Application Back Cloud Select the hardware settings, enter the parameters settings screen of touch-screen, you can set the network parameters, display modification, click“Save”to take effect immediately. 5、The parts and panel cutout of Haiwell HMI 8、Warnings in the instructions Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 9、 FCC electronic label operating instructions First step: Press the upper right corner of the screen about 10s,the device will enter the system setting interface; Second step: Click 'Ssystem Imformation' to enter the system information display interface; Third step:Click 'FCC' and popup the FCC electronic tag; FCC ID:2AOJ6-C7-W C7-w/C10-w HMI C7-w HMI C10-w HMI C7/C10 HMI parts description Liquid crystal and touch screen Double-deck USB Indicator light Power slot COM1 LAN COM2 Wifi and sound parameters, time parameters, etc., after the This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. close Thank you for choosing Haiwell HMI. Please let us know if you have any questions or shortcomings about our products or services. Haiwell company website：http://www.haiwell.com or http://www.haiwell.cn Copyright © 2017 Xiamen Haiwell Technology Co.,Ltd V1.0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Author : User Comments : Company : Create Date : 2018:01:11 15:37:31+07:30 Modify Date : 2018:01:17 11:53:25+08:00 Source Modified : D:20180111153731+07'37' Subject : Trapped : false Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Format : application/pdf Creator : User Description : Title : Haiwell 海为HD系列人机界面 Creator Tool : WPS Office Metadata Date : 2018:01:17 11:53:25+08:00 Keywords : Producer : Document ID : uuid:c811c010-237b-4627-b75c-6677d86c97cb Instance ID : uuid:5becc1bb-42e9-4de0-ab3f-c99782218b6c Page Count : 1EXIF Metadata provided by EXIF.tools