Xiaomi Communications XMVRVRMIV1 VR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3210910
Application ID	54BMrZl/0defJwQgE6Q1eQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.13kB (426671 bits)
Date Submitted	2016-11-29 00:00:00
Date Available	2016-12-01 00:00:00
Creation Date	2016-11-16 16:12:30
Producing Software	Foxit Phantom Printer Version 3.0.3.0804
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual

Mi Glass User Manual
Before Using:
1. Mi Glass MiV1 can be used with Mi 5 , 5S ,5S Plus ,Mi note2 or officially
announced compatible device models.
2. When use with Mi 5, 5S ,5S Plus ,Mi note2 it need MIUI support, please
upgrade MIUI to requested version.
3. Only for children above the age of 13.
4. Please read Health and safety reminding carefully before using, for safety and
accuracy considerations, the content of this user manual will be kept up to
date, visit miglass.mi.com/user manual to view the latest version
Health and safety:
1. Use Only In A Safe Environment. The Mi Glass produces an immersive virtual
reality experience that distracts you from and completely blocks your view of
your actual surroundings. Please pay special attention to avoid falling,
collision and other dangers. The Mi Glass equipped with a “pass-through”
feature which permits you to temporarily see your surroundings for brief real
world interaction. You should always remove the Mi Glass for any situation
that requires attention or coordination like walking, riding a bicycle and
driving.
2. When using Mi Glass, make sure it is comfortably fixed on the head
horizontally to ensure clarity of the image seen.
3. The human-being body will gradually adapt to VR, similar to motion sickness
adaptation. Do not use Mi glass when in fatigue, drinking, drug use,
indigestion, mental anxiety, cold headache since it will increase the body's
sensitivity to adverse symptoms.
4. Do not use Mi Glass in turbulent compartment, vessel since it will increase
the body's sensitivity to adverse symptoms.
5. Take at least a 10 to 15 minutes break every 30 minutes. Each person is
different, so take more frequent and longer breaks if you feel discomfort.
6. Stop using the device if you feel the heat, the system software will also be
monitored to prompt the notification when temperature is too high.
7. Listening to sound at high volumes can cause irreparable damage to your
hearing. Background noise, as well as continued exposure to high volume
levels, can make sounds seem quieter than they actually are. Due to the
immersive nature of the virtual reality experience, do not use the Gear VR
with the sound at a high volume so that you can maintain awareness of your
surroundings and reduce the risk of hearing damage.
8. Please stop using Mi Glass immediately when experience any of the following
symptoms: fainting, loss of consciousness, glasses fatigue, muscle twitching,
involuntary movements, blurred vision, distortion, ghosting or other
abnormal vision, dizziness, disorientation, balance damage, impaired sense of
hand-eye coordination, excessive sweating, excessive salivation, nausea,
drowsiness, fatigue or any similar symptoms of motion sickness.
9. Do not drive, operate machinery, or engage in other visually or physically
demanding activities that have potentially serious consequences (i.e.,
activities in which experiencing any symptoms could lead to death, personal
injury, or damage to property), or other activities that require unimpaired
balance and hand-eye coordination (such as playing sports or riding a bicycle,
etc.) until you have fully recovered from any symptoms.
Package Contents
Mi Glass, remote control, user manual, AAA batteries x2
Product overview:
Product Overview
Focus Adjustment Wheel
Rubber Cushion
Glass Key
Main Body
Front Cover
Headband Shaft
Optical Lens x 2
Forehead Cushion
ProximitySensor
Back Cushion
Foam Cushion
Headband adjustment Key
There is no need to charging Mi Glass, it is powered by mobile phone inserted
Get ready:
1. Adjust Mi Glass phone socket adapter for corresponding compatible mobile
devices
1） Remove front cover
2） Type C Connector holder in the outer position is for mobile devices other
than Mi 5
3） Push the Type C Connector holder inwards and the position is for Mi 5
4） Press Rest Button to make the holder back to outer position for mobile
devices other than Mi 5
Type C Holder
Reset
2. Insert the mobile phone into the headset and install the application
1） Please make sure the phone is connected to internet, suggest to link with
WiFi
2） Insert the phone with back outwards into Type C connector
3） Wear the Mi Glass, while download notification prompts, remove the
phone and complete the installation of the application
* Installation of the application requires MIUI support, please updated MIUI
to required version
Installing phone:
Insert the phone to Type C
connector with screen downside
Pull the right device holder out
Push down the phone into the
right device holder to be locked
Removing phone:
Pull the right device holder
outwards
Slide the phone outwards at an angle
Disconnect the phone from Type C
connector
3. Start the application on the phone and complete login and payment bonding
following the prompted guidance.
4. Connect Bluetooth remote control
1） Connect the remote control following the prompted guidance on the
phone
2） After insert AAA batteries, hold two buttons at same time to trigger the
connection status
3） The phone will scan and connect the nearby remote control
Entering experience virtual reality world
1. After preparation, insert the phone to Mi Glass
2. Properly wear the headset
Wear the headset, make
Firstly unlock the
sure the eyes match with
headband
lens, press the foam cushion
to the face and rotate back
cushion downwards
Headband adjustment wheel
Adjust headband
Rotate the back cushion
adjustment wheel till it feels
upwards
comfort and tight and pull
outwards to lock
3. Adjust ”Focus adjustment wheel” till the image is clear
Focus adjustment wheel
4. Wear the earphone
Earphone notch
Phone
Earphone connector
5. Remote control
Touchpad
Swipe and pressto select
Back/App Key
Home Key
Start exploring
1. Move pointer or screen
Thepointer and screen(field of view)moves depending on
the movements of the head
2. Select and confirm
Move your head to place the displayed pointer onto a desired selection, press
the Glass Key or press touchpad of remote control to complete the selection
、
Glass Key
Operate by pressing Glass Key
Operate by pressing touchpad
3. Universal Menu
At any time, press and hold Glass Key or Home Key on remote control to access
Universal Menu in which you can get back to Home Screen, configure setting,
check notification, review download status etc.
4. Answer and end calls
1） When the phone calls, the screen will pop up with the calling-in
notification, you can remove your phone from Mi Glass and answer the
call.
2） By selecting “Hands-Free answer” in calling-in notification, you can use
speaker of the phone the answer the call, when there is earphone with
microphone function plugged in, answer the call through earphone
3） You can also reject the phone call in calling-in notification
FCC:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired operation.
RF exposure warning:
The equipment complies with FCC RF exposure limits
set forth for an uncontrolled environment.
The equipment must not be co-located or operating in
conjunction with any other antenna or transmitter.
Produt name: XiaoMi VR Glass.
Product Number: MiV1
Manufacturer:Shanghai MeetVR Tech. Co., Ltd
Address: 4F, No.14, Caohejing High-tech Park,No.518XinzhuanRd,Songjiang
District, Shanghai
Welcom visiting XiaoMi service net http://fuwu.mi.com
Or call XiaoMi phone Number 400-100-5678

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 9
Author                          : 
Create Date                     : 2016:11:16 16:12:30+08:00
Creator                         : 
Producer                        : Foxit Phantom Printer Version 3.0.3.0804
Subject                         : 
Title                           : 

EXIF Metadata provided by EXIF.tools