Xiaomi Yunbike EN

yunbike-EN User manuals for Xiaomi Mi devices | XIAOMI-MI.com

User Manual: Xiaomi User manuals for Xiaomi Mi devices | Xiaomi-Mi.com

Open the PDF directly: View PDF PDF.
Page Count: 6

DownloadXiaomi Yunbike-EN
Open PDF In BrowserView PDF
I.C
OM

Xiaomi Yunbike C 1
Accessories

Charging device

Pedals х 2

Hex wrench

M
I-M

Battery

15. Battery
16. Power
17. Battery
18. Lock Battery
19. Socket
20. Pedal
21. Rear brake
22. Chain wheel
23. Chain
24. Motor
25. Footstep

XI

AO

1. Wheel
2. Front sleeve
3. Fork
4. Front brake
5. Brake System
6. Headlights
7. Front steering cup
8. Wheel
9. Measuring panel
10. Right brake handle
11. Stem
12. Left brake handle
13. Saddle
14. Saddle pin

Keys х 2

XIAOMI-MI.COM

Wrench

I.C
OM

Assembling and settings

M
I-M

1. Spinning front wheel clockwise by 180 degrees, confirm the right direction of motion (after the scroll wheel, press
the front brakes).
2. Reduce the stem clamp bolt using a 5mm hex wrench (need to twist counterclockwise). Alternately, remove the
front fork cartridge and other connecting elements.
3. First assemble front fork sleeve and place the into steering column. Take connecting elements of stern (logo side
up) and connect with the sleeve, insert tensioner bolt.

4. Set a stem parallel with the front wheel, then tighten the tensioner bolt.
5. Set and secure the right and left pedals using the 5mm Allen key (on the pedals, you will see notation R / L,
indicating the right and left foot).

Setting / Removing of battery

XI

AO

When installing battery in a special slot, follow the signs depicted direction, then you need to connect the battery to
the socket.
If you need to disassemble the battery, unplug it from the socket, turn key 90 degrees clockwise, remove the battery,
pulling it up.
After dismantling the battery, you can see the presence of USB port. Open the protective case and connect USB
cable, you can charge your digital devices (5V / 1A).

Socket

port

Slot for battery
installation

Video

Express Install Mi YunBike C1
For more information, visit the website
www.zhixingche.com

Driving of the Bicycle

I.C
OM

Press and hold the power button (more than
2 seconds), the system will give power then
strengthening is possible.
When driving, keep the velocity faster than
4.2 km / h (usually this speed is reached
after passage of two circles). Using the
control panel (which is located on the right
side), you can adjust the ride only by an
electric motor, in which case you can not
pedal. Turn off power of brake and gears,
then switch to gain.

Measuring panel has an USB port to charge
your phone (5V / 1A).
If after bike C1 be at rest for 20 minutes, it
automatically turns off.

M
I-M

During braking better use the left rear brake
handle;
Please choose roads, that are banned from
entering self-propelled vehicles;
Timely check the battery level since riding,
low charge could affect the lifespan of the
battery.
Use battery according to the conditions
described in the instructions;
When driving on long distances, you need
to contact the pro shop to check the spokes
and screws.

1. Level of gain; low, medium and high speed

AO

2. Current speed

3. Run; ODO total mileage / TRIP single run
4. Mileage

5. Charge level of 4 blocks - 100-80% of charge; 3 blocks
- 80-60% of charge; 2 blocks - 60-40% of charge; 1 unit 40-20% of charge; 0 units - 20-0% of charge
6. Switch Gears

XI

7. Gain -: Turn on: short press to decrease gain
8. Error Code: Hall sensor fault (1), switching of speeds
fault (2) failure of the electric motor (3) protection of
low pressure (4), protection against electric overload

(5), protection from blocking messages (6), problems
powered brake system (7), failure data (8). If you find
faults displayed wink appropriate designation
9. Gain + / Rear lights: Turn on: short press to increase
the gain; long press to turn on backlight, repeated long
press to turn off backlight
10. Bluetooth icon: when Bluetooth is connected,
appropriate designation lits
11.USB icon: when connected to the USB port, the
display shows the USB icon designation

Free warranty Terms

I.C
OM

Note: The following are the conditions which can not be problems of Mi YunBike C1 charging;
free warranty service.
F. You have not a valid document (current invoice) or a
mismatch of data from the device;
A. Term of the warranty expired;
G. Malfunction through smoke, pharmaceuticals, chemicals,
B. The emergence of breakage, due to improper care
corrosion, water ingress, etc.;
and device settings, and as a result of using Mi YunBike H. Malfunction of the electronic system bike through
C1 is not in accordance with instructions;
dampness, rain or snow;
C. Failure as a result of misuse, improper care or
I. Damage incurred in a force majeure (including but not
accident;
limited to - lightning, fire or flood);
D. Damage caused by self repair, alteration,
J. Natural breakdown / failure of parts that easily wear parts
and consumables (fuses, light bulbs, brake pads, brake
dismantling, then the device does not meet its original
state, or as a result of improper technical analysis and cables, spokes, tires, pedals, rubber plugs, plastic parts);
K. Maintenance device in unauthorized service centers;
determination of fault;
L. After purchase you do not like the color, size vehicle.
E. Improper use of original charger, which caused

Warranty

After-sales servicing is carried out according to the law on «The rights of consumers of China» and «Law on product
quality of China». In warranty service includes:
During the warranty period you have the right to repair, modify or return.
For repair, replacement or return of goods, you must have a receipt.

M
I-M

First, officials from the customer must examine the goods, identify existing problems and confirm its compliance with
the terms of the warranty service.

Enable / disable the battery, rear lights, charging
System:

Power button

1. Press and hold the power button for more than 2 seconds, then turns
indicator will light up 4. Every indicator points to a level of charge;

AO

75-100% 4 LED1- lits;
50-75%, LED1 is off, LED2-4 lit;
25-50%, LED1, LED2 are off, LED3-4 lit;
0-25%, LED1, LED2, LED3 are off, LED4 lights;
2. One short press the power button - continuous flicker of 4 indicators;
Press power button - 4 simultaneous flashing indicators;
Press power button - all 4 lights on constantly;
Press power button - repeat of three specified modes listed above
indicators;

XI

Turn off: under any circumstances, hold down
the power button for 2 seconds to eliminate the
vehicle;
Charging: When the battery charge indicators are
lit red when the battery is fully charged, green
lights are flashing;
Determining the level of charge the device while it
is charging:

> 98%, lamp 4 lits;
75-98%, LED1 flickers, the other 3 indicator lit continuously;
50-75%, LED1 is off, LED2 blinking, LED3, LED4 is constantly lit;
20-50%, LED1, LED2 are off, LED3 flickers, LED4 is lit
constantly;
0-20%, LED1, LED2, LED3 are off, LED4 flickers;

XI

AO

M
I-M

I.C
OM

List of faults

XI

AO

M
I-M

I.C
OM

Specifications

1. Scan the QR-code or go to https://zhixingche.
com/product/app, to download the Smart Bike
RDA.
2. Start Smart Bike RDA application, select the
appropriate bike home page. Click on the Bike
C1 to access more information about the bike.

Use of APP

3. Click the button on the left side of the main page
«connecting the vehicle» and enter the code.
4. In order to successfully connect devices must use your
smartphone to scan the QR-code, depicted on the handlebars
of the bike.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : (none)
Create Date                     : 2016:04:07 15:43:22+03:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2016:04:07 15:44:33+03:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:04:07 15:44:33+03:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:770097c0-0662-4580-bfe5-aef09dc18205
Original Document ID            : xmp.did:8F8FB9611AFCE5119DD787F1753F8F27
Document ID                     : xmp.id:41969D4CBEFCE511AFCA981F9D355EA0
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:40969D4CBEFCE511AFCA981F9D355EA0
Derived From Document ID        : xmp.did:F35C106CA5FCE511AFCA981F9D355EA0
Derived From Original Document ID: xmp.did:8F8FB9611AFCE5119DD787F1753F8F27
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2016:04:07 15:43:22+03:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 6
EXIF Metadata provided by EXIF.tools

Navigation menu