XinHuaMei Electronics BT-H01 Wireless Bluetooth Headphones User Manual BT H01

Shenzhen XinHuaMei Electronics Limited Company Wireless Bluetooth Headphones BT H01

User Manual

Bluetooth HeadsetBT-H01User ManualThank you for choosing our foldable Bluetooth headset. You will enjoy its perfect sound and cool style.Button description Multifunction key9 Track back: Track forward- Volume down+ Volume upPairing1. Ensure that your phone is switched on.2. Ensure that the headset is switched off, press and hold the multifunction key for about 5 seconds until red light and blue light are flashing alternatively.3. Activate the Bluetooth on your phone and set it to search for Bluetooth devices.4. Select the BT-H01 from the list, and pair it with your phone. If password is needed, type in 0000.Switch onTo switch on, press and hold the multifunction key for about two seconds.Switch offTo switch off, press and hold the multifunction key for about three seconds.Calls1. To answer a call, just press the multifunction key quickly.2. To reject a call, press and hold the multifunction key for about two seconds.3. To redial the last phone number, press the multifunction key twice quickly.Listen to musicIf you receive or make a call while listening to music, the music is paused until the call ends.Technical specifications1. Bluetooth spec. v3.02. Charging time: 2-3 hours3. Music playback time: up to 6 hours4. Talking time: up to 10 hours5. Standby time: up to 125 hours
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment。 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC ID: R8H-BT-H01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu