XinHuaMei Electronics BT-H01 Wireless Bluetooth Headphones User Manual BT H01
Shenzhen XinHuaMei Electronics Limited Company Wireless Bluetooth Headphones BT H01
User Manual
Bluetooth Headset
BT-H01
User Manual
Thank you for choosing our foldable
Bluetooth headset. You will enjoy its
perfect sound and cool style.
Button description
Multifunction key
9 Track back
: Track forward
- Volume down
+ Volume up
Pairing
1. Ensure that your phone is switched on.
2. Ensure that the headset is switched off,
press and hold the multifunction key for
about 5 seconds until red light and blue
light are flashing alternatively.
3. Activate the Bluetooth on your phone and
set it to search for Bluetooth devices.
4. Select the BT-H01 from the list, and pair
it with your phone. If password is needed,
type in 0000.
Switch on
To switch on, press and hold the
multifunction key for about two seconds.
Switch off
To switch off, press and hold the
multifunction key for about three seconds.
Calls
1. To answer a call, just press the
multifunction key quickly.
2. To reject a call, press and hold the
multifunction key for about two seconds.
3. To redial the last phone number, press the
multifunction key twice quickly.
Listen to music
If you receive or make a call while listening
to music, the music is paused until the call
ends.
Technical specifications
1. Bluetooth spec. v3.0
2. Charging time: 2-3 hours
3. Music playback time: up to 6 hours
4. Talking time: up to 10 hours
5. Standby time: up to 125 hours
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment。
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: R8H-BT-H01
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may
cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.