XinHuaMei Electronics YM-Z38 Bluetooth speaker User Manual

Shenzhen XinHuaMei Electronics Limited Company Bluetooth speaker

User manual

1Bluetooth Speaker 2USB charging cableBluetooth 3.0, high speed and low power consumption.Built in rechargeable lithium battery.Built in microphone for hands free phone calls.Support TF card playback.AUX in function for non-bluetooth devices.3AUX input cable 4Warranty cardBluetooth SpeakerUser GuideYM-Z3811 Power on/off.Play/Pause/Mode buttonNextVol+Phone buttonPREVVol-Aux jackDC 5V charging portTF card slot23456789102 3 45 6 78910Read this manual carefully before puttingthe appliance into operation and keep this manual for future reference.Do not insert any metal object into the device.To avoid a static charge, do not use thedevice in an extremely dry climate.Do not attempt to repair the device yourself.Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.Bluetooth version 3.0Bluetooth profiles HSP, HFP, A2DP and AVRCPBluetooth operatingdistance10 meters (equal to 33 feet)Output power 5wX2Frequency response100Hz-20kHzDistortion ≤1%Microphonesensitivity-40dbPlayback time Music time 6 hours, talk time 8 hoursCharging input powerDC 5VCharging time Approx3 hoursUnit INCH 6.3*2.4*1.6 INCH1.Press and hold the Power on/off button until you hear a tone, the Bluetooth status LED will flash red and blue, indicating that the Bluetooth speaker is in pairing mode.2.Set your Bluetooth-enabled device to search for Bluetooth devices.3.When the Bluetooth-enabled device finds the Bluetooth speaker, select “YM-Z38” from the list of found devices.4.After a successful pairing, a beep tone will be heard indicating that the device is paired and the Bluetooth status LED will stay solid blue.If a previously paired device is in range when the Bluetooth speaker is turned on,the Bluetooth speaker will connect to it automatically.YM-Z38YM-Z38The screenshots above are typical of manyBluetooth-ebabled devices in the markettoday,andare used to assist in the explanation of the pairing process. Your Bluetooth-enabled devices’s interface andinteraction with the Bluetooth Speaker may differ slightlyfrom the illustrations slightly above.Using the Bluetooth SpeakerPress and hold the button for about 3 seconds.Qucik press button to play or pause music.Press and hold button for about 3 seconds to switch between Switch between Bluetooth, TF card playback, and AUX mode.Press button to increase volume.Press button to decrease the volume.Double quick press the button, the last number called will be redialed.Press button to skip to the next song.Press button to skip to the previous song.next song.To answer a call, quick press the 　 button.To end a call, quick press the button again.Charging the Bluetooth speakerMake sure you charge your Bluetooth speaker for at least 4 hours before usingit for the first time.Insert TF card into the TF card slot.Press button to turn on the Bluetooth speaker.Press Mode button to switch the Bluetooth speaker to TF card playback mode.Play/Pause/Mode buttonTo charge the Bluetooth speaker, connect the supplied micro USB cable to the USBcharging port and the other end to your computer or USB charging device. The LED indicator will flash when charging. When charging is completed, the LED indicator will stop flashing and stay solid green.LIKE IT? LOVE IT? REVIEW IT.Power UserAt Youmoon, we’re committed toconstant improvement through user feedback.Our Power User programme is one of the main ways we engage with users to learn how we can do better.As a Power User, you can Email us to receive free samples of existing and pre-release products in exchange for insightful and unbiased review.Try our products. Share your experience. Help us get it right.www.youmoontech.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu