Xircom An Intel GEM3501 Core Engine, PCS-1900 GSM Radio Module User Manual Core Engine XGAP Specification
Xircom, An Intel Company Core Engine, PCS-1900 GSM Radio Module Core Engine XGAP Specification
Contents
- 1. Core Engine Approvals Guide
- 2. Core Engine Developers Guide
Core Engine Approvals Guide
![](/img.php?id=167160&img=bg1.png)
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
Core Engine (PCS 1900)
GSM Wireless Terminal
Approvals Guide
(Preliminary Draft – 7/6/2001)
C
Co
on
nf
fi
id
de
en
nt
ti
ia
al
l
![](/img.php?id=167160&img=bg2.png)
Core Engine Approvals Guide Preliminary Draft: 07/06/01 2
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
1
1
I
IM
MP
PO
OR
RT
TA
AN
NT
T
I
IN
NF
FO
OR
RM
MA
AT
TI
IO
ON
N
1.1 Revision History
Date Revision Description
3/21/01 001 Initial draft revision for internal review (preliminary).
7/6/01 002 Revised In: Customer Device Approvals Section
North American Homologation
Radio Approvals Section
Added In: Customer Device Approvals Section
North American Homologation
RF Exposure – SAR
Miscellaneous Approvals
Section 255 Compliance
E911 Compliance
Leveraging Modular Approvals Section
PTCRB Approval and IMEI Assignment
Xircom Assistance with Approvals Section
Miscellaneous Items
Audio Testing
Integration Testing
Added Section: 4.5 Labeling and Documentation
Requirements
Remove all references to Dual-Band 900/1800
1.2 Disclaimer
Xircom, Inc., an Intel company (hereafter “Xircom”) shall not be liable for consequential or
incidental damages, injury to any person or property, anticipated or lost profits, loss of time, or
other losses incurred by Customer or any third party in connection with the implementation of the
Protocol or Customer's failure to comply with the information and instructions contained herein.
The information in this document is preliminary and subject to change by Xircom.
Core Engine Approvals Guide Preliminary Draft: 07/06/01 3
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
T
TA
AB
BL
LE
E
O
OF
F
C
CO
ON
NT
TE
EN
NT
TS
S
1 IMPORTANT INFORMATION....................................................................................................... 2
1.1 Revision History ............................................................................................................................ 2
1.2 Disclaimer ..................................................................................................................................... 2
2 APPROVALS OVERVIEW ........................................................................................................... 5
2.1 Scope of This Document ............................................................................................................... 5
2.1.1 GSM FTA Testing.................................................................................................................. 5
2.1.2 North American Homologation...............................................................................................5
2.2 References.................................................................................................................................... 5
3 CORE ENGINE MODULAR APPROVALS................................................................................... 7
3.1 GSM FTA Testing.......................................................................................................................... 7
3.2 North American (United States and Canada) Homologation.......................................................... 7
3.2.1 Radio Approvals .................................................................................................................... 7
3.2.2 Product Safety ....................................................................................................................... 8
3.2.3 Electromagnetic Compatibility (EMC)..................................................................................... 8
4 CUSTOMER DEVICE SYSTEM APPROVALS ............................................................................ 9
4.1 Type Approval ............................................................................................................................... 9
4.2 North America (United States and Canada) Homologation............................................................ 9
4.2.1 Radio Approvals .................................................................................................................... 9
4.2.2 Product Safety ....................................................................................................................... 9
4.2.3 Electromagnetic Compatibility (EMC)................................................................................... 10
4.2.4 RF Exposure - SAR ............................................................................................................. 10
4.3 Miscellaneous Approvals............................................................................................................. 10
4.3.1 Section 255 Compliance...................................................................................................... 10
4.3.2 E911 Compliance ................................................................................................................ 10
4.4 Labeling and Documentation Requirements................................................................................ 11
4.4.1 Instructions to Manufacturer of the End Device Incorporating the Core Engine.................... 11
4.4.2 Responsibilities of the Manufacturer of the End Device Incorporating the Core Engine in a
Fixed or Mobile Application........................................................................................................... 12
4.4.3 Specific Responsibilities for Portable Products and Applications.......................................... 13
4.4.4 Specific Responsibilities for Mobile Products and Applications ............................................ 13
4.4.5 Specific Responsibilities for Fixed Products and Applications.............................................. 14
4.4.6 Labeling the Product............................................................................................................ 14
Core Engine Approvals Guide Preliminary Draft: 07/06/01 4
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
5 LEVERAGING MODULAR APPROVALS.................................................................................. 15
5.1 Type Approval ............................................................................................................................. 15
5.2 North American (United States and Canada) Homologation........................................................ 15
5.3 PTCRB Approval and IMEI Assignment....................................................................................... 15
6 XIRCOM ASSISTANCE WITH APPROVALS ............................................................................ 16
6.1 Type Approval ............................................................................................................................. 16
6.1.1 GSM Testing........................................................................................................................ 16
6.1.2 Materials.............................................................................................................................. 16
6.1.3 Schedule.............................................................................................................................. 17
6.2 Safety.......................................................................................................................................... 17
6.2.1 Materials.............................................................................................................................. 17
6.2.2 Schedule.............................................................................................................................. 17
6.3 Emissions.................................................................................................................................... 17
6.3.1 Materials.............................................................................................................................. 18
6.3.2 Schedule.............................................................................................................................. 18
6.4 Miscellaneous Items.................................................................................................................... 18
6.4.1 Audio Testing....................................................................................................................... 18
6.4.2 Integration Testing............................................................................................................... 18
APPENDIX A ................................................................................................................................. 20
Core Engine Approvals Guide Preliminary Draft: 07/06/01 5
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
2 A
AP
PP
PR
RO
OV
VA
AL
LS
S
O
OV
VE
ER
RV
VI
IE
EW
W
The responsibility for an overall compliant product, per world wide regulatory standards, rests with the
Core Engine customer who incorporates the Core Engine into their device.
Currently some countries allow for a modular approval. This allows the Core Engine module to be
used in numerous products without testing and submitting the Core Engine module portion again for
certification. Some countries do not allow this and will require every product that the Core Engine is
integrated into to be tested and certified on it’s own.
2.1 Scope of This Document
The goal of this document is to provide a guidance note for our customers to help them better
understand the process that is required to incorporate the Core Engine module into their custom
device.
This document describes the approvals (agency, safety and emissions) that have been obtained by
Xircom for the Core Engine module, as well as those, which must be obtained for any end user device
incorporating a Core Engine module.
2.1.1 GSM FTA Testing
Full Type Approval (FTA) testing is not regulatory but rather a pre-requisite for market entry. It is used
to indicate that a GSM terminal complies with the terminal conformance testing specification, currently
known as:
• PCS 11.10 (1900 MHz)
• 3GPP TS 51.010-1 (Successor to PCS 11.10)
2.1.2 North American Homologation
Within North America (United States and Canada), Core Engine regulatory approvals are required in
the following areas to meet the requirements of the Federal Communications Commission (FCC in the
United States) and of Industry Canada (IC in Canada):
• Radio Authorization (FCC and IC Certification)
• EMC (emissions only)
In addition, product safety evaluation, approval and marking of any product incorporating the Core
Engine are required. Such approvals can be obtained from approved agencies in the United States
and Canada, including (but not limited to):
• Underwriters Laboratories
• Canadian Standards Association
2.2 References
[1] PCS 11.10 for 1900MHz Specification
[2] 3GPP TS 51.010-1
Core Engine Approvals Guide Preliminary Draft: 07/06/01 6
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
[3] FCC’s OET Bulletin 65 on Specific Absorption Rates (SAR)
[4] FCC Part 15, Subpart B
[5] FCC Part 24, Subpart E (Broadband PCS)
[6] FCC Part 2, Subpart J (Equipment Authorization)
[7] UL 1950
[8] Canadian RSS-133 (PCS)
[9] RS-122 (Radio Certification Procedure)
[10] Safety Code 6 (RF Exposure)
[11] Canada ICES-003
Core Engine Approvals Guide Preliminary Draft: 07/06/01 7
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
3
3
C
CO
OR
RE
E
E
EN
NG
GI
IN
NE
E
M
MO
OD
DU
UL
LA
AR
R
A
AP
PP
PR
RO
OV
VA
AL
LS
S
The following testing, authorizations and approvals are applicable to the Core Engine module.
3.1 GSM FTA Testing
"FTA" is used to indicate that a GSM terminal complies with the terminal conformance testing
specification, currently known as PCS 11.10 (1900 MHz). The successor to this specification is 3GPP
TS 51.010, which will become the single GSM/GPRS/EDGE terminal conformance specification
document.
Not regulatory but rather a pre-requisite for market entry, operators and industry groups drive the FTA.
The GSM NA Operators - PCS Terminal Certification Review Board (PTCRB) of GSM-North America
drives the 1900 MHz band.
Since the Core Engine is not a complete GSM terminal (it does not have a SIM), technically, it cannot
be Type Approved (i.e., pass all FTA testing requirements and grant of an IMEI). However, as much
FTA testing as possible is done in a reference configuration. This leaves only a small amount of
incremental testing to be performed on the end device incorporating the Core Engine.
FTA testing includes:
• Layer 1 – Transmitter, receiver and transceiver performance; spurious emissions; cell
selection
• Layer 2 – Test of the Layer 2 signaling functions
• Layer 3 – General protocol, handover, location update, RLM, SIM, SMS, RLP (data), SS
(supplementary services), GPRS protocol
• Audio – Currently only handset audio testing is supported by GSM 11.10
NOTE: All testing is defined in PCS 11.10 and its successor (3GPP TS 51.010-1).
3.2 North American (United States and Canada) Homologation
The Core Engine will be tested to and shown to comply with the applicable radio, electromagnetic
compatibility and safety requirements and standards of the Federal Communications Commission
(FCC), Industry Canada (IC), and Underwriters Laboratory.
3.2.1 Radio Approvals
Both the FCC and IC will authorize the Core Engine as a PCS transceiver. The Core Engine can be
incorporated into a final OEM product without the need for new or additional certification, if the
instructions and requirements of the Core Engine’s usage, regulatory requirements, testing and
approvals are followed. The manufacturer of the end device incorporating the Core Engine must
address human exposure to RF. Separate filings or approvals may be required, depending on the
specifics of the final product. Regulatory standards and documents addressing radio approvals
include:
Core Engine Approvals Guide Preliminary Draft: 07/06/01 8
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
• FCC Part 24, Subpart E (Broadband PCS)
• FCC Part 2, Subpart J (Equipment Authorization)
• FCC OET Bulletin 65 on RF Exposure Evaluation
• IC RSS-133 (PCS)
• IC RSP-100 (Radio Equipment Certification Procedure)
• Health Canada Safety Code 6 (RF Exposure Limits)
3.2.2 Product Safety
The Core Engine will be evaluated by Underwriters Laboratory and marked as a Recognized
Component. This will simplify the product safety evaluation of the end device incorporating the Core
Engine. Any NRTL (Nationally Recognized Test Laboratory), not just UL, may be selected for
evaluation of the end device incorporating the Core Engine. The recognized component status of the
Core Engine may be leveraged as dictated by product or market requirements.
3.2.3 Electromagnetic Compatibility (EMC)
To the extent possible, the Core Engine will be evaluated to demonstrate that it complies with the
emissions and immunity requirements applicable to typical consumer products. This evaluation will be
performed with the Core Engine in a stand-alone configuration or built into a simple but representative
product. Only EM emissions are regulated in North America for the majority of products. However,
EM immunity of the Core Engine will be demonstrated during EU EMC testing. Applicable standards
include:
• FCC Part 15, Subpart B
• IC ICES-003
Core Engine Approvals Guide Preliminary Draft: 07/06/01 9
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
4
4
C
CU
US
ST
TO
OM
ME
ER
R
D
DE
EV
VI
IC
CE
E
S
SY
YS
ST
TE
EM
M
A
AP
PP
PR
RO
OV
VA
AL
LS
S
The manufacturer of the end device incorporating the Core Engine is responsible for complying with all
regulatory requirements and directives as listed in but not limited to this document and as required by
the final product type. A summary of these regulatory and market approval requirements and
standards follows.
4.1 Type Approval
The end device incorporating the Core Engine requires incremental FTA testing to address those
areas that could not be tested during the initial FTA evaluation (such as SIM electrical), and to ensure
that the performance of the Core Engine has not degraded when integrated into the end device.
Xircom, our GSM Testing Lab Partner, and the manufacturer of the end device incorporating the Core
Engine will determine exact requirements on a case-by-case basis.
The manufacturer of the end device incorporating the Core Engine is responsible for completion of the
terminal approval process through the GSM NA PTCRB. At the completion of the incremental FTA
evaluation, the GSM testing laboratory will provide the necessary documentation to enable the
manufacturer of the end device incorporating the Core Engine to complete this process;
documentation of this process is found in:
• GSM NA PTCRB Document NAPRD.03 – Overview of PCS Type certification review
board (PTCRB) Mobile Equipment Type Certification and IMEI Control
• CTIA GSM-1900 Terminal Unit Certification Program Management Document
4.2 North America (United States and Canada) Homologation
The Core Engine will be tested and will comply with all applicable radio, electromagnetic compatibility
and safety as required by the Federal Communications Commission, and Underwriter’s Laboratory.
4.2.1 Radio Approvals
The Core Engine will be certified by both the FCC (USA) and Industry Canada as a PCS transceiver
and should not have to be re-tested by the manufacturer of the end device incorporating the Core
Engine as a PCS transceiver. However, additional FCC/IC certification work and filings will be
necessary to demonstrate and document RF exposure compliance. Labeling of the final product to
satisfy RF exposure requirements may be necessary, depending on the final product.
4.2.2 Product Safety
The Core Engine will be evaluated by Underwriters Laboratory and marked as a Recognized
Component. This will simplify the product safety evaluation of the end device incorporating the Core
Engine. Any NRTL (Nationally Recognized Test Laboratory) not just UL may be selected for
evaluation of the end device incorporating the Core Engine for the US market; many NRTLs also can
evaluate products for the Canadian market as well, in addition to CSA.
Core Engine Approvals Guide Preliminary Draft: 07/06/01 10
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
4.2.3 Electromagnetic Compatibility (EMC)
To the extent possible, the Core Engine will be evaluated to demonstrate that it complies with the
emissions and immunity requirements applicable to typical consumer products. The end device
incorporating the Core Engine must comply with the appropriate emissions standards for its product
type and application. Emissions requirements for typical products are given in:
• FCC Part 15, Class A or B (both radiated and AC power line conducted)
• IC ICES-003 Class A or B
4.2.4 RF Exposure - SAR
The manufacturer of the end device incorporating the Core Engine must address human exposure to
RF in consideration of the application, antenna type, etc. Regulatory standards and documents
addressing human exposure to RF include:
• FCC OET Bulletin 65 on RF Exposure Evaluation
• Health Canada Safety Code 6 (RF Exposure Limits)
Preliminary RF exposure measurements should be performed as soon as feasible during development
of the final OEM product. Specific Absorption Rate (SAR) is a strong function of the product form
factor and position relative to the body. Preliminary testing will show if SAR is an issue in the current
form factor and allow for some redesign (move the antenna as far from head as possible, antenna
pattern shaping, etc.) if there are issues.
RF exposure evaluation is not the responsibility of Xircom. The Core Engine, as a PCS (GSM 1900)
terminal is limited to 1 W output; FCC Part 24 rules limits EIRP to 2 W, thus placing a limit of 3 dB on
antenna gain (for a mobile/portable device). Specific implementation details, including antenna type,
gain and position relative to the user's body during usage is beyond Xircom's control.
Xircom can provide software support for preliminary SAR testing to put the EUT into the worst-case
operating mode from an RF exposure perspective (2 transmit slots, maximum power, etc.).
4.3 Miscellaneous Approvals
Additional or alternate regulatory or market testing, approvals and/or documentation may be required,
depending on the type of device into which the Core Engine is incorporated.
4.3.1 Section 255 Compliance
TDMA systems in general, and GSM specifically, may cause audible rectification (at GSM frame rate)
in hearing aids. Since there may be larger issues here than just speaker HAC compliance, the
manufacturer of the end device incorporating the Core Engine should ensure that their product
provides accessible input, control, and mechanical functions, as well as accessible output, display and
control functions.
4.3.2 E911 Compliance
Xircom attends GSM-NA PTCRB meetings (operator and manufacturer terminal approval forum) to
stay abreast of terminal requirements, including E911. Xircom also works with operators directly.
GSM-NA Operators will soon adopt a single E911 technology across the board. Thus, we recommend
that all parties continue to evaluate the situation to ensure that there are no surprises in the future
regarding E911.
![](/img.php?id=167160&img=bgb.png)
Core Engine Approvals Guide Preliminary Draft: 07/06/01 11
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
4.4 Labeling and Documentation Requirements
The manufacturer of the end device incorporating the Core Engine is responsible for complying with all
labeling and documentation requirements as outlined in but not limited to the following sections.
4.4.1 Instructions to Manufacturer of the End Device Incorporating the Core Engine
To comply with the requirements of the National Environmental Policy Act (NEPA) of1969, operation of
an FCC-regulated transmitter may not result in human exposure to radio frequency radiation in excess
of the applicable health and safety guidelines established by the FCC. Further information on RF
exposure issues may be found in the FCC's Office of Engineering and Technology (OET) Bulletin
Number 65, "Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields" and Supplement C, "Additional Information for Evaluating Compliance of
Mobile and Portable Devices with FCC Limits for Human Exposure to Radio Frequency Emissions."
Both of these documents are available via the Internet at the OET web site: http://www.fcc.gov/oet.
Industry Canada (IC) standards for 2 GHz PCS transmitters are established in RSS-133 (2 GHz
Personal Communications Services). This document requires that the procedures of RS-122
(Evaluation Procedure for Mobile and Portable Radio Transmitters with respect to Health Canada’s
Safety Code 6 for Exposure of Humans to Radio Frequency Fields) must be followed concerning
exposure to RF fields. RS-122 calls out Health Canada Safety Code 6 (Limits of Human Exposure to
Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz), which is
available on the Internet at www.hc-sc.gc.ca/rpb. It specifies the requirements for safe use of radiation
emitting devices, in general. One thing to note, the FCC and IC definitions and requirements are
nearly identical.
The product incorporating the Core Engine is a radio transceiver, which operates under the authority
of 47 CFR Part 24, Subpart E of the FCC Rules and Regulations. When installed and operated in
accordance with the instructions provided, these devices comply with current FCC regulations
regarding human exposure to radio frequency radiation.
For the purpose of determining compliance with current FCC and IC rules addressing human exposure
to radio frequency radiation, the FCC has established the following three categories of transmitting
devices:
• Portable Devices – devices where the antenna is located within 20 cm (7.87 inches) of any
person, including the user, if applicable. Portable devices operating under the authority of FCC
Part 24 (broadband PCS) and IC are limited to a maximum of 2 W EIRP.
• Mobile Devices – devices designed to be used in other than fixed locations and generally such
that the antenna is located at a minimum of 20 cm (7.87 inches) from any person, including
the user, if applicable. Mobile devices operating under the authority of Part 24 (broadband
PCS) are limited to a maximum of 2 W EIRP.
• Fixed devices – devices in which the antenna, either integral to the product or remotely
located, is physically secured at one location and is not able to be easily moved to another
location.
The following installation and operation restrictions apply to all Core Engine products for use in both
the United States and Canada:
• This device may be used in fixed, mobile, and portable applications.
• The use of this device for desktop and other applications where the antenna can easily be
relocated are considered to be mobile applications.
• In FIXED applications, a separation distance of at least 20 cm (7.87 inches) between the
antenna and the body of the user and other persons must be maintained at all times. The
Core Engine Approvals Guide Preliminary Draft: 07/06/01 12
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
antenna gain is limited to a maximum of 3 dBi, with a corresponding Equivalent Isotropic
Radiated Power (EIRP) of 33 dBm/2 W.
• In MOBILE applications, a separation distance of at least 20 cm (7.87 inches) between the
antenna and the body of the user and other persons must be maintained at all times. The
antenna gain is limited to a maximum of 3 dBi, with a corresponding EIRP of 33 dBm/2 W.
• In PORTABLE applications, a separation distance of less than 20 cm (7.87 inches) between
the antenna and the body of the user and other persons may be possible. The antenna gain
is limited to a maximum of 3 dBi, with a corresponding EIRP of 33 dBm/2 W.
• End products must provide instructions to ensure compliance with radio frequency radiation
exposure requirements.
• When using Fixed and Mobile applications a warning label visible to all persons exposed to
the antenna and identical to that described in this manual must be displayed on or next to the
antenna.
Antenna gain is defined as gain in dBi (dB referenced to an isotropic radiator) minus cabling loss.
Note: Additional care must be taken by the installer and/or user of the products incorporating the Core
Engine to ensure proper antenna selection and installation. Adherence to the above conditions is
necessary for safe operation regarding exposure to RF radiation. Depending upon the application and
type of product into which the Core Engine module has been incorporated, additional actions and
evaluation may be required to meet these conditions. However, in all cases the primary concern is to
ensure compliance with current Federal guidelines and regulations that limit human exposure to radio
frequency radiation.
4.4.2 Responsibilities of the Manufacturer of the End Device Incorporating the Core Engine
in a Fixed or Mobile Application
In addition to any other regulatory requirements, the manufacturer of the end device incorporating the
Core Engine, and integrators must include or provide the following information, instructions, warnings
and labels with any device or product into which the Core Engine has been incorporated:
![](/img.php?id=167160&img=bgd.png)
Core Engine Approvals Guide Preliminary Draft: 07/06/01 13
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
Information Description
Detailed
Operating
Instructions
for ensuring
compliance
with current
FCC guidelines
which limit
human
exposure to
radio frequency
radiation
The manufacturer of the end device incorporating the Core Engine must provide an
operating/installation manual with the final product which clearly indicates that these operating
conditions and restrictions must be observed at all times to ensure compliance with current
FCC guidelines which limit human exposure to radio frequency radiation.
• 20 cm (7.87 inch) separation distance between the antenna and all persons must be
maintained at all times for all fixed and mobile products and applications
• Maximum antenna gain is limited to 3 dBi* in mobile and portable products and
applications
• Maximum antenna gain is limited to 3 dBi* in fixed products and applications.
• Modifications and/or additions to the Core Engine, including use of antennas with
higher gain than those authorized by the FCC, are prohibited
*dBi = antenna gain in dB relative to an isotropic radiator minus the interconnected RF
cable loss
Antenna
Avoidance
Label
Attach the following warning
label directly to or displayed
next to the antenna.
Furthermore, this label must
be visible to and easily
readable by all persons in the
immediate vicinity of the
antenna
WARNING
To comply with FCC RF exposure requirements, a separation
distance of 20 cm (7.87") or more must be maintained
between this antenna and all persons.
Human
Exposure
Compliance
Statement
Include the following
statement in the instruction
/operation manual.
Xircom, Inc. Wireless Technology Group certifies that
the Core Engine Radio Module (FCC ID:XXXXXXX)
complies with the RF hazard requirements applicable to
broadband PCS equipment operating under the
authority of 47 CFR Part 24, Subpart E of the FCC
Rules and Regulations. This certification is contingent
upon installation, operation and use of the Core Engine
and its host product in accordance with all instructions
provided to both the OEM and end used. When installed
and operated in a manner consistent with the
instructions provided, the Core Engine meets the
maximum permissible exposure (MPE) limits for general
population / uncontrolled exposure at defined in Section
1.1310 of the FCC Rules and Regulations.
4.4.3 Specific Responsibilities for Portable Products and Applications
The FCC/IC must separately authorize each device or product, into which the Core Engine has been
incorporated, and which are intended for use in an application that meets the definition of “portable” for
the purposes of determining compliance with current FCC/IC guidelines limiting human exposure to
radio frequency radiation. Portable devices must be evaluated for RF exposure based on Specific
Absorption Rate (SAR) limits; further information on such evaluations is available from the FCC/IC via
the Internet.
4.4.4 Specific Responsibilities for Mobile Products and Applications
Separate or additional FCC approvals are not required for devices or products, into which the Core
Engine has been incorporated, that are used in applications that meet the definition of "mobile." For
all end products, the manufacturer of the end device incorporating the Core Engine must provide
instructions, warnings and labels to ensure that the product complies with current FCC guidelines
limiting human exposure to radio frequency radiation. Current FCC and IC regulations limit the EIRP
Core Engine Approvals Guide Preliminary Draft: 07/06/01 14
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
of mobile devices to 2 W. Because the nominal RF output power of the Core Engine GSM transceiver
is 1.0 W (30 dBm), antenna gain for mobile products and applications cannot exceed 3 dBi.
4.4.5 Specific Responsibilities for Fixed Products and Applications
Separate or additional FCC approvals are not required for devices or products, into which the Core
Engine has been incorporated, that are used in applications, which meet the definition of "fixed.” For
all end products, the manufacturer of the end device incorporating the Core Engine must provide the
instructions, warnings and labels to ensure that the product complies with current FCC guidelines
limiting human exposure to radio frequency radiation. Current FCC and IC regulations limit the EIRP
of fixed devices to 2 W. Because the nominal RF output power of the Core Engine GSM transceiver is
1.0 W (30 dBm), antenna gain for mobile products and applications cannot exceed 3 dBi.
4.4.6 Labeling the Product
The label on the device should contain the following:
FCC ID:AAABBBBBB
Contains Transmitter FCC ID: XXXYYYYYY
CANADA: ZZZZZZZZZ
AAA is the Grantee code of the manufacturer of the end device; BBBBBB is the product code for the
end device. XXX is the Xircom Grantee Code and YYYYYY is the Core Engine product code.
ZZZZZZZZZ is the Canadian Certification ICES-003 number.
IMEI - Barcode and numeric text to match that of the Core Engine inside. This information must be on
the outside of the product.
There will be a FCC DoC (Declaration of Conformity) mark with text ("Tested to Comply with FCC
Standards; FOR HOME OR OFFICE USE"). For Canada, there should also be a statement to the
effect "Complies with Canadian ICES-003 Class B" or "ICES-003 Class B".
In addition, there will be the "normal" label text, marks and information for a product of this type. This
will include the manufacturer, model, and perhaps serial number (in addition to the IMEI) and safety
labeling requirements, ratings, NRTL, UL, others that may apply to the end device.
Core Engine Approvals Guide Preliminary Draft: 07/06/01 15
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
5
5
L
LE
EV
VE
ER
RA
AG
GI
IN
NG
G
M
MO
OD
DU
UL
LA
AR
R
A
AP
PP
PR
RO
OV
VA
AL
LS
S
The end device incorporating the Core Engine module may leverage some of the modular approvals,
which have already been obtained for the Core Engine, and in doing so the customer producing the
end device may save much time, effort and expense.
5.1 Type Approval
Xircom will leverage its previous FTA testing. Xircom, our GSM Testing Lab Partner, and the
manufacturer of the end device incorporating the Core Engine will determine exact requirements on a
case-by-case basis.
5.2 North American (United States and Canada) Homologation
The Core Engine will be certified by both the FCC (USA) and Industry Canada as a PCS transceiver
and should not have to be re-tested by the manufacturer of the end device incorporating the Core
Engine as a PCS transceiver.
The manufacturer of the end device incorporating the Core Engine is responsible for addressing
human exposure to RF (SAR) in consideration of the application, antenna type, etc. Regulatory
standards and documents addressing human exposure to RF include:
• FCC’s OET Bulletin 65 on Specific Absorption Rates (SAR)
• Safety Code 6 (RF Exposure)
The Core Engine will be evaluated by Underwriters Laboratory and marked as a Recognized
Component. This will simplify the product safety evaluation of the end device incorporating the Core
Engine. Any NRTL (Nationally Recognized Test Laboratory), not just UL, may be selected for
evaluation of the end device incorporating the Core Engine.
To the extent possible, the Core Engine will be evaluated to demonstrate that it complies with the
emissions and immunity requirements applicable to typical consumer products. The end device
incorporating the Core Engine must comply with the appropriate emissions standards for the type and
application of the end product.
5.3 PTCRB Approval and IMEI Assignment
Xircom can provide the manufacturer of the end device incorporating the Core Engine with assistance
in obtaining IMEI assignments, IMEI allocation; and solving IMEI issues like uniqueness, security and
integrity for the final product. Since the Core Engine cannot be FTA approved on its own (primarily
because of the lack of a SIM), final GSM NA/PTCRB approval will be up to the manufacturer of the
end device incorporating the Core Engine. This involves submission of the FTA report (both the
results of initial and the "delta" testing) to the PTCRB/CTIA by the lab, some additional paperwork
(typically declarations provided by Xircom), and a fee. The GSM-NA administrator will then assign the
IMEI to the manufacturer of the end device incorporating the Core Engine for the final product.
Core Engine Approvals Guide Preliminary Draft: 07/06/01 16
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
6
6
X
XI
IR
RC
CO
OM
M
A
AS
SS
SI
IS
ST
TA
AN
NC
CE
E
W
WI
IT
TH
H
A
AP
PP
PR
RO
OV
VA
AL
LS
S
Xircom has access to both in-house and third party test facilities, equipment and personnel to assist
the customer with the process of obtaining approvals for their end device incorporating the Core
Engine module. Depending on the level of approval and the type of assistance required, a fee may be
charged for some of the services.
6.1 Type Approval
Xircom has invested in industry-accepted and validated GSM FTA test solutions from Anite
Telecommunications and other equipment providers. In addition, Xircom has partnered with a
recognized GSM test laboratory to provide the benefits of third party testing using its in-house testing
platforms. GSM test laboratory personnel using Xircom’s in-house test equipment will perform
accredited testing when required.
6.1.1 GSM Testing
Xircom's in-house FTA testing lab provides for validated GSM/GPRS FTA testing. Additional
capabilities provide tools to simulate and debug network interoperability problems.
Test capabilities include:
• GSM/GPRS RF (transmitter and receiver performance) testing on the Anite RAMS+. The
RAMS+ provides complete coverage across all bands (GSM, DCS and PCS) for all mandatory
RF test cases. Certain test cases (radiated emissions, vibration testing) where specialized
facilities or equipment is required are performed at Xircom's partnered GSM testing laboratory.
• GSM / GPRS Protocol testing on the Anite SAT system. The GSM SAT provides complete
test case coverage across all bands for all mandatory tests, with the some limited exceptions
(i.e. audio test cases). The Anite SAT also provides GPRS test case coverage. Test case
coverage not provided on Xircom’s SAT system is provided by Xircom’s partnered GSM
testing laboratory.
• SIM testing is accomplished using an ORGA Subscriber Identity Module (SIM) simulator, in a
stand-alone mode for SIM electrical tests and in combination with the SAT for SIM protocol
tests.
6.1.2 Materials
The customer must provide the following material to Xircom in order to support Xircom’s testing of the
end device:
• Hardware - Sufficient samples (3 to 6) to support simultaneous RAMS (RF), SAT (protocol)
and ORGA (Subscriber Identity Module) testing. Modifications to the hardware may be
required (addition of RF cable or connector for connection to RAMS+ or addition of a pigtail to
the SIM connector for SIM electrical testing, for example).
• RS232 or USB pass thru capability to allow direct access to the Core Engine for automated
testing and issuing manual AT commands.
Core Engine Approvals Guide Preliminary Draft: 07/06/01 17
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
• Software - All application level software required to perform basic call functions (i.e. answer,
dial, power unit off and on, etc.).
• Documentation - A complete documentation package, including schematics, theory of
operation, and all other applicable documents is required in order to connect, operate, and test
the device.
6.1.3 Schedule
Assuming no problems are uncovered, incremental SIM electrical testing can take from one to two
days. Time required for FTA regression testing depends on several factors including the amount of
testing deemed necessary by Xircom and its partnered GSM testing laboratory, laboratory availability,
and so forth.
6.2 Safety
Xircom maintains relationships with various product safety testing organizations. Xircom can provide
the manufacturer of the end device incorporating the Core Engine with assistance in:
• Product safety evaluation
• Product safety approval services, including UL and other NTRL approvals
• CB Scheme reports
6.2.1 Materials
The customer must provide the following material to Xircom in order to support Xircom’s testing of the
end device:
• Hardware - Sufficient samples to support simultaneous UL and other NTRL approvals.
Modifications to the hardware may be required.
• Software - All application level software required to perform basic call functions (i.e. answer,
dial, power unit off and on, etc.).
• Documentation - A complete documentation package, including schematics, theory of
operation, and all other applicable documents is required in order to connect, operate, and test
the device.
6.2.2 Schedule
Approval testing duration depends on the exact tests, which are required by Xircom, our safety testing
organizations, and the manufacturer of the end device incorporating the Core Engine. An example of
an Approvals Worksheet is illustrated in Appendix A.
6.3 Emissions
Xircom works with several EMC test labs and is experienced in solving EMC issues. Xircom can
provide the manufacturer of the end device incorporating the Core Engine with assistance in:
• Initial design consultations
• Formal testing and test execution
• EMC issues that may arise when integrating it into a final product
• Acquisition of approvals
Core Engine Approvals Guide Preliminary Draft: 07/06/01 18
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
6.3.1 Materials
The customer must provide the following material to Xircom in order to support Xircom’s testing of the
end device:
• Hardware - Sufficient samples to support EMC testing and approvals. Modifications to the
hardware may be required.
• Software - All application level software required to perform basic call functions (i.e. answer,
dial, power unit off and on, etc.).
• Documentation - A complete documentation package, including schematics, theory of
operation, and all other applicable documents is required in order to connect, operate, and test
the device.
6.3.2 Schedule
Approval testing duration depends on the exact tests, which are required by our EMC testing
organizations, Xircom and the manufacturer of the end device incorporating the Core Engine.
6.4 Miscellaneous Items
Xircom can provide the manufacturer of the end device incorporating the Core Engine with assistance
in other areas including:
• UL and other NTRL approvals, listings, and reports.
• Product labeling (i.e. FCC/IC, and UL) of the final device into which the Core Engine has
been integrated - Xircom maintains relationships with various product safety testing
organizations which provide a full range of product safety evaluation and approval services,
including CB Scheme reports.
• FTA Completion and IMEI acquisition
• Operator terminal requirements, testing and approvals
6.4.1 Audio Testing
Xircom can provide the manufacturer of the end device incorporating the Core Engine with assistance
with testing the audio functionality. If the device is more of a traditional telephone terminal than a data
terminal, PCS 11.10 audio testing may be required of the built-in audio (speaker/microphone)
functionality. Audio quality of terminals is important to network operators and operator requirements
need to be addressed. Although audio testing of headset audio implementation is currently not
supported or mandatory it should be verified whether the target operators and test lab requires testing
of the device.
Because audio performance is a combination of both the Core Engine (baseband audio circuitry) and
external speaker/microphone components, audio pre-testing is recommended as soon as feasible and
is likely a joint effort between Xircom and the manufacturer of the end device incorporating the Core
Engine.
6.4.2 Integration Testing
Some level of integration testing should be done as soon as the core is integrated into the final
product. The objective is to look for any possible interaction between the core and rest of the product.
This could be in either direction (i.e. radio channel desensitizing, performance degradations, immunity
issues due to radiated RF, etc.). Suitable testing may be rolled into "delta" FTA testing. Since FTA
Core Engine Approvals Guide Preliminary Draft: 07/06/01 19
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
testing is conducted using coax, similar evaluation of core/product interactions in an "over the air"
(antenna attached) configuration is also advisable at an early point in the integration process.
Although the test are the prime responsibility of the manufacturer of the end device incorporating the
Core Engine, Xircom can provide assistance, participation, guidance, and test lab support either at
Xircom or in another place.
![](/img.php?id=167160&img=bg14.png)
Core Engine Approvals Guide Preliminary Draft: 07/06/01 20
Part Number: 07100029, Revision: 002 Confidential
© 2001 Xircom, Inc., an Intel company All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc., an Intel company
A
AP
PP
PE
EN
ND
DI
IX
X
A
A
Approvals Worksheet
FCC Part 2 FCC Part 15 FCC Part 24 SAR UL1950 CTI
A
PCS 11.10 E911 Section 255 RS-133
Hardware
Software
Quantit
y
Date Re
q
uired
Hardware
Software
Quantit
y
Date Re
q
uired
Status (Open/Closed)
Actual End Date
Product Label Affected
Product Documentation Affected
Remarks
Test Method & Relevant Documentation
Completion Required Date
Estimated Start Date
Actual Start Date
Test Platform
Requirements
(Final Test &
Submission
)
Test Platform
Requirements
(Initial Pre-Test)
Approval Name
Test Performed By
Test Location
Test Duration
(
weeks
)
Submission Performed By
Test Fee
(
US$
)
Regulation Fee (US$)