Xirgo Technologies XT4850C GPS asset tracking device User Manual user guide

Xirgo Technologies Inc. GPS asset tracking device user guide

user guide

1XT-4850C User GuideModel: XT-4850CFCC ID: GKM-XT4850CIC: IC: 10281A-XT4850CVersion 2
2Table of ContentsDocument Change History .......................................................................................... 31 Introduction ............................................................................................................ 41.1 Feature Matrix................................................................................................................................................................................. 42 Hardware Description .............................................................................................. 52.1 Hardware Specifications............................................................................................................................................................. 62.2 Cable Harness Description......................................................................................................................................................... 72.3 LED Description.............................................................................................................................................................................. 73 Device Mounting Options ........................................................................................ 83.1 Screw Mounting.............................................................................................................................................................................. 83.2 Magnetic Mounting........................................................................................................................................................................ 83.3 Optional Cradle Mounting ........................................................................................... Error! Bookmark not defined.4 Quick Start Guide..................................................................................................... 94.1 Device Wakeup ............................................................................................................................................................................... 94.2 Configuring the Device via SMS..............................................................................................................................................10
3Document Change HistoryRevisionDateAuthorChanges1.04/21/15N BarakatDocument Creation
41 IntroductionXT-4850C is an energy harvesting global multi-band 3G platform supporting long term, remotedeployments without the need to replace the self-charging battery. This installation guide describesthe physical hardware, associated parts, the different mounting options available, and a quick start-upprocedure.1.1 Feature MatrixFeature DescriptionBase UnitZigbee®Upgrade3G Communication Module with 2G RollbackGPS Receiver for Tracking ApplicationsSupports SMS, TCP, UDP, FTPOver-the-air Configuration and FW UpgradeLocation PollingPeriodic ReportingWired or Virtual Ignition On/Off ReportingDirection Change AlertsSpeed Threshold AlertsMileage Threshold AlertsMain Battery Disconnect AlertsHeartbeat and Power-up/Reset AlertsIgnition Idle Alert (wired ignition only)Towing Start/Stop Alerts(wired ignition only)Movement Start/Stop Alerts (wired ignition only)2 Digital InputsPark Time Alerts (wired ignition only)Virtual OdometerMotionSleep/Wake Configuration SettingsGeofence (Radial, Rectangular, and Polygonal)Device Diagnostics (Battery voltage, connectivity, etc.)Wireless Sensor ConnectivityInter-device Communication
52 Hardware DescriptionBelow is a depiction of key interfaces of the XT-4850C:The Associated Cable Harness that interfaces with the unit is shown below:Solar PanelLED IndicatorsDevice LabelWake-up/Zigbee PairingButtonZigb7-Pin BayonetConnector
62.1 Hardware SpecificationsTechnologyCDMA 1xRTTModelXT-4850CFrequency BandDual-band Support: 850/1900GPS SpecificationReceiver 50 channels50 channelsReceiver trackingSensitivity-161 dBmAccuracy+/- 2.5m CEP (50% , -130 dBm, > 6 Satellites)Cold Start<33 secHot Start< 1 secPower RequirementsD.C. Power8-24V, 12 V nominalBatteryInternal 6600mAh rechargeable Li-IonPhysical ConnectionInterface Connector8-pin attached harnessCellular/GPS AntennaInternalSIM AccessInternalProgrammingSerial (UART Logic Level)MechanicalCase MaterialABS plastic with weather-proofing for outdoor useDimension7.6” X 4.9” X 1.4”Weight< 18 oz.Operating Temperature-30°C to +70°CCertificationsProductFCCICIP67CarrierVerizon/Sprint
72.2 Cable Harness DescriptionPin #WireColorPin NameFunctional DescriptionPort Characteristic1WhiteIN1Ignition Sense8v to 24v, Internally pulled low2YellowIN2Input port2.4 to 24V, < 0.2 VNote: Internally pulled high3BlackGroundGround4GreenOutOutput Port (Defaulted opencircuit)5BlueUART-RxExternal battery negative terminal3.3V Logic InterfaceCom Port Settings:Baud rate: 115200 bps; Flow control:None; 8N16BrownUART-Tx3.3V Logic InterfaceCom Port Settings:Baud rate: 115200 bps; Flow control:None;8N17RedVBATTMain battery voltage, DC8-24 V8OrangeADCAnalog Input8-24 V2.3 LED DescriptionLEDDescriptionStatusCellular (Blue)Searching for Cellular NetworkLED OFFCellular Carrier LockFast Blinking once every 1 secondGPS (Green)Searching for satelliteSolidGPS LockBlinkingZigbee (Aurburn)TBDTBD
83 Device Mounting Options3.1 Screw MountingThe XT-4850C has two flanges (two holes per) at each end of the housing for screw mounting thedevice to the mounting surface.3.2 Magnetic MountingThe XT-4850C can also be equipped with magnets which support a load up to 10kg.
9Quick Start Guide4.1 Device WakeupTo start up the device, simply hold the black button located near the circular connector on theside panel of the device for 3 seconds. You should see the blue “C” LED light up and then fade out.The LED will fast-blink when the device is successfully connected to the network.Wake up Button
104.2 Configuring the Device via SMS1) Ensure your device is active on your cellular account.2) Awaken device from sleep XT-4850C via the “wake-up” button.3) If the device needs more power, then supply 12V DC via the red wire of the cable harness.4) Ensure device cellular LED is blinking based on LED definition in this document.5) Using your mobile phone or SMS gateway send +XT:1008 command to the device MDN6) Command: “+XT:1008,<SM>”- Sets SMS Number7) Response (via SMS): $$<UID>,<1008>,<SM>##8) Once you have set SMS to reply to your mobile or gateway, you can now send othercommands to device via SMS per device protocol documentation.a. Command +XT:1010 configures network settingsb. Command +XT:3040 and +XT:3042 configure alert and threshold settings9) +XT:7008 save device configuration to permanent memory
11FCC/IC:REGULATORY COMPLIANCE INFORMATIONThis equipment with FCC-ID: GKM-XT4850C and IC-ID: 10281A-XT-4850C, Model: XT-4850Cis subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules.NOTICE:Changes or modifications not expressly approved by the party responsible for compliance could void the user'sauthority to operate the equipment.This device complies with Part 15 of the FCC Rules and with license exempt Radio Standard Specifications ofIndustry Canada.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesiredoperation.Les changements ou modifications non expressément approuvés par la partie responsable de la conformitépourraient annuler l'autorité de l'utilisateur à utiliser l'équipement.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts delicence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage estsusceptible d'en compromettre le onctionnemenRadio frequency radiation exposure Information:This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance of 20 cmbetween the radiator and your body. Co-location of this radio device with other radio transmitters may void it'scompliance with the said RF exposure limits and would have to be subject to re-assessment.

Navigation menu