Xirgo Technologies XT4850C GPS asset tracking device User Manual user guide

Download:
Mirror Download [FCC.gov]
Document ID	2620637
Application ID	IO66cRmNAUUZvoN6a/c4cw==
Document Description	user guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.17kB (289612 bits)
Date Submitted	2015-05-21 00:00:00
Date Available	2015-11-17 00:00:00
Creation Date	2015-05-12 18:27:13
Producing Software	Nitro Pro 9 (9. 0. 5. 9)
Document Lastmod	2015-05-12 18:27:18
Document Title	user guide
Document Creator	Nitro Pro 9 (9. 0. 5. 9)

XT-4850C User Guide
Model: XT-4850C
FCC ID: GKM-XT4850C
IC: IC: 10281A-XT4850C
Version 2
Table of Contents
Document Change History .......................................................................................... 3
1 Introduction ............................................................................................................ 4
1.1 Feature Matrix................................................................................................................................................................................. 4
2 Hardware Description .............................................................................................. 5
2.1 Hardware Specifications ............................................................................................................................................................. 6
2.2 Cable Harness Description ......................................................................................................................................................... 7
2.3 LED Description.............................................................................................................................................................................. 7
3 Device Mounting Options ........................................................................................ 8
3.1 Screw Mounting.............................................................................................................................................................................. 8
3.2 Magnetic Mounting........................................................................................................................................................................ 8
3.3 Optional Cradle Mounting ........................................................................................... Error! Bookmark not defined.
4 Quick Start Guide..................................................................................................... 9
4.1 Device Wakeup ............................................................................................................................................................................... 9
4.2 Configuring the Device via SMS..............................................................................................................................................10
Document Change History
Revision
1.0
Date
4/21/15
Author
N Barakat
Changes
Document Creation
1 Introduction
XT-4850C is an energy harvesting global multi-band 3G platform supporting long term, remote
deployments without the need to replace the self-charging battery. This installation guide describes
the physical hardware, associated parts, the different mounting options available, and a quick start-up
procedure.
1.1 Feature Matrix
Feature Description
3G Communication Module with 2G Rollback
GPS Receiver for Tracking Applications
Supports SMS, TCP, UDP, FTP
Over-the-air Configuration and FW Upgrade
Location Polling
Periodic Reporting
Wired or Virtual Ignition On/Off Reporting
Direction Change Alerts
Speed Threshold Alerts
Mileage Threshold Alerts
Main Battery Disconnect Alerts
Heartbeat and Power-up/Reset Alerts
Ignition Idle Alert (wired ignition only)
Towing Start/Stop Alerts(wired ignition only)
Movement Start/Stop Alerts (wired ignition only)
2 Digital Inputs
Park Time Alerts (wired ignition only)
Virtual Odometer
Motion
Sleep/Wake Configuration Settings
Geofence (Radial, Rectangular, and Polygonal)
Device Diagnostics (Battery voltage, connectivity, etc.)
Wireless Sensor Connectivity
Inter-device Communication
Base Unit






















Zigbee®
Upgrade
























2 Hardware Description
Below is a depiction of key interfaces of the XT-4850C:
Wake-up/
Zigbee Pairing
Button
Zigb
Device Label
7-Pin Bayonet
Connector
Solar Panel
LED Indicators
The Associated Cable Harness that interfaces with the unit is shown below:
2.1 Hardware Specifications
Technology
Model
Frequency Band
GPS Specification
Receiver 50 channels
Receiver tracking
Sensitivity
Accuracy
Cold Start
Hot Start
Power Requirements
D.C. Power
Battery
Physical Connection
Interface Connector
Cellular/GPS Antenna
SIM Access
Programming
Mechanical
Case Material
Dimension
Weight
Operating Temperature
Certifications
Product
Carrier
CDMA 1xRTT
XT-4850C
Dual-band Support: 850/1900


50 channels
-161 dBm



+/- 2.5m CEP (50% , -130 dBm, > 6 Satellites)
<33 sec
< 1 sec


8-24V, 12 V nominal
Internal 6600mAh rechargeable Li-Ion




8-pin attached harness
Internal
Internal
Serial (UART Logic Level)




ABS plastic with weather-proofing for outdoor use
7.6” X 4.9” X 1.4”
< 18 oz.
-30°C to +70°C




FCC
IC
IP67
Verizon/Sprint
2.2 Cable Harness Description
Pin #
Wire
Color
White
IN1
Black
Green
Ground
Out
Yellow
Pin Name
Blue
IN2
UART-Rx
Brown
UART-Tx
Red
Orange
VBATT
ADC
Functional Description
Port Characteristic
Ignition Sense
Input port
8v to 24v, Internally pulled low
2.4 to 24V, < 0.2 V
Note: Internally pulled high
Ground
Output Port (Defaulted open
circuit)
External battery negative terminal
Main battery voltage, DC
Analog Input
3.3V Logic Interface
Com Port Settings:
Baud rate: 115200 bps; Flow control:
None; 8N1
3.3V Logic Interface
Com Port Settings:
Baud rate: 115200 bps; Flow control:
None;8N1
8-24 V
8-24 V
2.3 LED Description
LED
Cellular (Blue)
GPS (Green)
Zigbee (Aurburn)
Description
Searching for Cellular Network
Cellular Carrier Lock
Searching for satellite
GPS Lock
TBD
Status
LED OFF
Fast Blinking once every 1 second
Solid
Blinking
TBD
3 Device Mounting Options
3.1 Screw Mounting
The XT-4850C has two flanges (two holes per) at each end of the housing for screw mounting the
device to the mounting surface.
3.2 Magnetic Mounting
The XT-4850C can also be equipped with magnets which support a load up to 10kg.
Quick Start Guide
4.1 Device Wakeup
To start up the device, simply hold the black button located near the circular connector on the
side panel of the device for 3 seconds. You should see the blue “C” LED light up and then fade out.
The LED will fast-blink when the device is successfully connected to the network.
Wake up Button
4.2 Configuring the Device via SMS
1)
2)
3)
4)
5)
6)
7)
8)
Ensure your device is active on your cellular account.
Awaken device from sleep XT-4850C via the “wake-up” button.
If the device needs more power, then supply 12V DC via the red wire of the cable harness.
Ensure device cellular LED is blinking based on LED definition in this document.
Using your mobile phone or SMS gateway send +XT:1008 command to the device MDN
Command: “+XT:1008,”- Sets SMS Number
Response (via SMS): $$,<1008>,##
Once you have set SMS to reply to your mobile or gateway, you can now send other
commands to device via SMS per device protocol documentation.
a. Command +XT:1010 configures network settings
b. Command +XT:3040 and +XT:3042 configure alert and threshold settings
9) +XT:7008 save device configuration to permanent memory
10
FCC/IC:
REGULATORY COMPLIANCE INFORMATION
This equipment with FCC-ID: GKM-XT4850C and IC-ID: 10281A-XT-4850C, Model: XT-4850C
is subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules.
NOTICE:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and with license exempt Radio Standard Specifications of
Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Les changements ou modifications non expressément approuvés par la partie responsable de la conformité
pourraient annuler l'autorité de l'utilisateur à utiliser l'équipement.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le onctionnemen
Radio frequency radiation exposure Information:
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body. Co-location of this radio device with other radio transmitters may void it's
compliance with the said RF exposure limits and would have to be subject to re-assessment.
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2015:05:12 18:27:13Z
Modify Date                     : 2015:05:12 18:27:18Z
XMP Toolkit                     : 3.1-701
Creator Tool                    : Nitro Pro 9  (9. 0. 5. 9)
Metadata Date                   : 2015:05:12 18:27:18Z
Format                          : application/pdf
Creator                         : 
Title                           : 
Description                     : 
Keywords                        : 
Producer                        : Nitro Pro 9  (9. 0. 5. 9)
Document ID                     : uuid:1e35a7b2-05e4-484f-bdd5-a4dacc18ef88
Page Mode                       : UseNone
Page Count                      : 11

EXIF Metadata provided by EXIF.tools