Xmark ESC Security/Remote Control Transmitter User Manual 803U0901 Rev02 indd

Download:
Mirror Download [FCC.gov]
Document ID	321434
Application ID	pppzhZXXxbVA0o/jAiqt7g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.3kB (128723 bits)
Date Submitted	2003-04-28 00:00:00
Date Available	2003-04-28 00:00:00
Creation Date	2002-11-21 16:20:51
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2002-11-21 16:20:51
Document Title	803U0901_Rev02.indd
Document Creator	PScript5.dll Version 5.2
Document Author:	Steve

Escort Key User Instructions
Part Number 803A0901
What is the Escort Key?
The Escort Key temporarily disarms a WatchMate Monitor to allow
you to escort one or more residents through a protected area without triggering an alarm. The Escort Key can also be used to clear an
alarm.
Note: The ID and MR Monitor must be configured to use an Escort
Key. Ask your Authorized Dealer for assistance.
Escorting Residents
1 Enter the protected area. If the resident is with you make sure
that the door is closed or an alarm will result.
2 Press the button on the Escort Key once (the green light will flash
to indicate that the Escort Key is operating).
Caution: Once the protected area has been temporarily
disarmed, other monitored residents may pass through
undetected. The Escort Key should only be used when
exits are under continuous staff supervision.
3 Check that the Monitor has disarmed:
A ID or MR Monitor
The Monitor display will show the disarm time remaining (in
seconds), as in the example below.
DISARMED TEMPORARILY
FOR: 020
? FOR HELP
Note: The disarm time is a configurable setting on the Monitor, and is typically 20 seconds. Ask your facility director for
the actual disarm times of the Monitors in your facility.
B LC Monitor
The yellow LED on the Monitor will activate. You have 20
seconds to escort the resident(s) through the protected area
before the Monitor rearms.
4 You may now escort the resident through the protected area.
Figure 1: The Escort Key
Clearing an Alarm
1 Investigate the cause of the alarm. Locate the resident and make
sure he or she is safe.
2 Escort all monitored residents away from the protected area.
3 While inside the protected area, press the button on the Escort
Key to clear the alarm. The Monitor will automatically rearm.
Low Battery Indication
The Watchlet low battery alert feature in the Monitor can be used to
provide early warning of falling battery power in the Escort Key.
1 Enter the protected area, and press and hold the button on the
Escort Key.
2 If the Escort Key has a low battery: the ID or MR Monitor displays the message Tx: Low Batt, and the LC Monitor emits an
intermittent beeping sound.
The Escort Key may continue to work for some time with a low battery. The battery cannot be replaced. To order a replacement Escort
Key, contact your Authorized Dealer.
Certified to the ISO 9001 Quality Standard
309 Legget Drive, Ottawa, ON K2K 3A3, Canada or
808 Commerce Park Drive, Ogdensburg, NY 13669 USA
Telephone: 1-800-267-9111 Facsimile: 1-613-592-4296 Web Site: www.xmarksystems.com
© 2001-2002 Instantel Inc. All Rights Reserved. Instantel and WatchMate are registered
trademarks of Instantel Inc. in North America. Xmark and Watchlet are trademarks of Instantel Inc.
Xmark is a division of Instantel Inc. Printed in Canada. November 2002. 803U0901 Rev 02.
2
Warranty
Statements
Xmark’s products are warranted against defects in materials and workmanship and shall perform in accordance with published specifications
for a period of one year from the date of shipment from the dealer.
United States—Federal Communication Commission (FCC)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Warning: Changes or modifications not expressly approved by Xmark
could void the user’s authority to operate the equipment.
Canada—Industry Canada
This device complies with RSS-210 of Industry and Science Canada.
Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation
of the device.
New Zealand—Ministry of Commerce
This device meets the requirements of specification RFS 29 under
Regulation 43 of the Radio Communications (Radio) 1993 regulations.
Japan—MPT
This device meets the requirements of Paragraph 6-1-1 of the Electric
Wave Act, May 27, 1989.
Limitation of Liability
This Product has been designed for use to reduce the risk of resident
wandering through remote detection.
The range, accuracy, function and performance of this Product may
vary from the published specifications due to many factors, including,
without limitation, site impairments from structural effects, metal
objects in the vicinity, placement of the receiver and transmitter,
interference from other electrical devices, atmospheric effects, installation, and maintenance. There may be other factors, which also affect
performance of this Product.
Instantel does not guarantee that this Product will detect 100% of
resident wanderings. Instantel does not guarantee that this Product
will not return false reports of resident wandering.
Weekly testing and maintenance of this Product, as described in the
Product documentation, is essential to verify the system is operating
correctly and to ensure that the probability of detecting an alarm
and/or locating the transmitter are maximized.
The failure to undertake regular testing and maintenance will increase
the risk of system failure and failure to detect resident wandering. The
failure to undertake regular testing and maintenance will increase the
risk of false reports of resident wandering.
Instantel hereby disclaims all warranties, express or implied, arising out
of or in connection with any of its Products or the use or performance
thereof, including but not limited to, where allowable by law, all other
implied warranties or conditions of merchantable quality and fitness
for a particular purpose and those arising by statute or otherwise in
law or from a course of dealing or usage of trade.
Instantel’s liability to you or anyone claiming through or on behalf of
you with respect to any claim or loss arising out of the use or misuse of
Instantel’s Product, defective products or materials, improper installation or maintenance of Instantel’s Product or products or the system
in which they are incorporated, or alleged to have resulted from an
act or omission of Instantel or any person, negligent or otherwise,
shall be limited to:
A) the repair or replacement of defective Product or materials supplied
by Instantel during the warranty period as set out in the Product
documentation; or, at the option of Instantel,
B) refund of the purchase price of the Product supplied by Instantel.
In no event shall Instantel be liable for general, specific, indirect, consequential, incidental, exemplary or punitive damages or any losses or
expenses suffered by you or anyone else, whether or not Instantel, or
its employees, officers, agents, resellers or installers has been informed
of the risk of such loss or expense and whether or not such losses or
expenses were foreseeable.
803U0901 Rev 02

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:11:21 16:20:51-05:00
Modify Date                     : 2002:11:21 16:20:51-05:00
Page Count                      : 2
Creation Date                   : 2002:11:21 21:20:51Z
Mod Date                        : 2002:11:21 21:20:51Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Steve
Metadata Date                   : 2002:11:21 21:20:51Z
Creator                         : Steve
Title                           : 803U0901_Rev02.indd

EXIF Metadata provided by EXIF.tools