Xmark TTG Tag Tester User Manual Guide R0 94

Xmark Corporation Tag Tester Guide R0 94

Manual

        980-000010-000R1.01 eLink Tag Tester - User Guide               Computer Serial Interface (Future option) 9V Alkaline Battery Battery Cover Replace only with Alkaline Battery 1 Tag Tester Functions  2 Rear View And Battery Replacement The Tag Tester performs the following functions:  • Reads the unique ID of a tag, by generating an RF field (Tag In Field – TIF). • Tests the Tamper mechanism of a tag (Tag Initiated Communications – TIC). • Reads the battery status for the tag (Good or bad only).  Tag Tamper Test Indicator 2 Lines by 12 Characters backlit Liquid Crystal Display Scroll Down Button Scroll Up Button Cancel Entry and Power OFF Button Accept Entry, Power ON and Backlight Button Tag ID Test Indicator  6” Field Pattern Tag is best read about 6” under Tester. Tags may also be placed adjacent to Tester, with Tester laying on flat surface 3 Tag Read Range
        980-000010-000R1.01 eLink Tag Tester - User Guide             4 Tag Tester Operation 2001 eXI Wireless Systems Inc. All rights reserved. eXI and the eXI logo, RoamAlert, RoamAlertPlus and eLink! are either trademarks or registered trademarks of eXI Wireless Systems inc. Specifications subject to change without notice eXI Wireless Systems Inc. Suite 100 - 13551 Commerce Parkway Richmond, BC  Canada V6V 2L1 1-800-667-9689 (North America only) Telephone +1 (604) 207-7760 Hold down the “Accept” button for one second Press “Accept” for testing a tag If Tag is not detected in 30 seconds If Tag is detected, and the tag battery is low Operate the Tamper mechanism on the tag  Tamper  mechanism failed     Begin next Test Tamper Detected Approximately 2 seconds after power up  The Tester automatically powers down after 60 seconds of inactivity. Pressing the “Cancel” button for 3 seconds also turns off the unit. Tag Tester 9V Battery low condition is reported on the display for 2 seconds, after which the screen will revert back to the previous function. Holding down the “Accept” button for 3 seconds enables the display backlight. NOTICE  Any changes or modifications to the eLink Tag Tester that have not been approved by EXI Wireless Systems Inc. could void the user’s authority to operate this device.

Navigation menu