Xrinda Technology SPRO2 Bluetooth Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2658508
Application ID	lkaslQlNrJK4JUiZ2OR8iw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.78kB (222214 bits)
Date Submitted	2015-06-25 00:00:00
Date Available	2015-06-25 00:00:00
Creation Date	2015-06-23 17:59:58
Producing Software	Foxit Phantom Printer Version 3.0.3.0804
Document Lastmod	2015-06-24 16:43:21
Document Title	User Manual

Model: SPRO2
秘密 Con fid en ti al ▲
Using the Remote Controller
You can use the remote controller to turn on projector, control UI, open application, playback control, control PPT presentation,
adjust volume, or use it as a laser pen.
Overview
Laser Aperture
Indicator Light
Projection Key
Laser Key
Navigation Key
OK Key
Home Key
Back Key
Menu Key
Play Control Key
Volume Key
Knowing the Keys
Projection Key
Press to turn on the projector.
Press to open the projector settings options menu when the projector is on.


Laser Key
Press and hold to use the remote controller as a laser pen.
WARNING!
Do not stare into the laser light as this may cause injury to the eyes.
Navigation Key
Press to scroll up, down, left and right.
OK Key
Press to start an application/function.
Home Key


Press to return to the HOME tab of the home screen.
Press and hold to open the Dolphin Browser or the Google app.
Back Key
Press to go to the previous screen.
Menu Key

Press to get options for the current screen.

Press and hold to see recently used apps.
Play Control Key
Press to skip videos, pause and resume playback.
Volume Key (Volume Up/Down)
Press or hold to turn the volume up or down.
Connect to MF97G
Before using the remote controller, you need to connect your remote controller to MF97G via Bluetooth.
Method one: Normal mode
1. Press and hold the Back Key and OK Key on the remote controller simultaneously for 3 seconds.
<以上所有信息均为中兴通讯股份有限公司所有，不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
第 1页
秘密 Con fid en ti al ▲
2. Slide down the status bar and turn on Bluetooth.
3. Touch the Home Key > SETTINGS tab > System > Network > Bluetooth, search for Spro Remote Controller and touch
it to connect to MF97G. Once connected, the indicator light on the remote controller will blink fast for 3 seconds.
NOTE:
The remote controller will exit pairing mode and go to sleep mode if there is no connection with it for more than 2 minutes.
Method two: Fast mode
When your MF97G’s Bluetooth is turned on and visible to other devices, press and hold the Home Key and OK Key on the
remote controller simultaneously for 3 seconds, and then the remote controller will pair with MF97G automatically. Once
connected, the indicator light on the remote controller will blink fast for 3 seconds.
NOTE:
The remote controller will exit pairing mode and go to sleep mode if there is unsuccessful connection for more than 3 seconds.
To pair again, press the OK Key and Home Key.
Unpair from MF97G
1. Touch the Home Key > SETTINGS tab > System > Network > Bluetooth.
2. Touch the icon
beside Spro Remote Controller.
3. Touch Unpair.
NOTE:
When not using the remote controller for a long period, remove the battery from MF97G.
<以上所有信息均为中兴通讯股份有限公司所有，不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
第 2页
秘密 Con fid en ti al ▲
Turning On/Off the Projector
 Press the Projection Key on the top left corner of the remote controller to turn on the projector.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation
<以上所有信息均为中兴通讯股份有限公司所有，不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
第 3页

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 3
Author                          : 
Create Date                     : 2015:06:23 17:59:58+08:00
Creator                         : 
Producer                        : Foxit Phantom Printer Version 3.0.3.0804
Subject                         : 
Title                           : 
Modify Date                     : 2015:06:24 16:43:21+08:00

EXIF Metadata provided by EXIF.tools