Xtreme DSP Global VANTAGE-VX1 Bluetooth Headset User Manual Vantage VX1 User manua1 0108 pd

Xtreme DSP Global Pte Ltd Bluetooth Headset Vantage VX1 User manua1 0108 pd

Users Manual

òÊ¿²¬¿¹» ÊÈï Bluetooth® Headset User Manual BTH-510 DIAGRAM 1. Charging port 2. Ear loop 3. Soft gel ear tips 4. Multifunction button 5. Volume control button 6. Status Indicator light 7. Microphone EAR TIP ADJUSTMENT and SELECTION 1 2 3 4 The BTH-510 headset comes with three (large, medium, and small) soft-gel ear tips and an optional ear loop. The ear loop and mid-sized ear tip are installed on the headset in the package. 1.Turn the ear tip clockwise to position R and fix it on the right ear. 2.Turn the ear tip counter-clockwise to position L and fix it on the left ear. 3.Hang the headset on your ear and examine if it fits. If not, then replace it with a suitable one. 4.Turn the ear tip to position Nas shown in the diagram and it can be removed. To avoid damaging the ear tip, please hold the bottom of the ear tip as shown on the arked spot?before pulling it out.5.Hold the ear tip downward to position N and fix it on the headset. Then, turn it to position R or L.6.When not in use, please lock the ear tip at either R or L position to avoid drop-off. Marked spot 4 5 EAR LOOP The ear loop was installed on the headset. It enhances the stability of the headset. To switch it to the other ear, you may remove it from the headset, turn it over to the other side, and re-install it on the headset. CHARGING YOUR HEADSET Warning: Use the supplied charger only. One must fully charge the battery before first use. Generally, the process takes about two hours. 1. Connect the USB cable to BTH-510 and USB car charger, the computer, or other power sources. 2. While charging, the status indicator light turns red constantly. It will be turned off when charging is complete. 3. Detach the USB cable from BTH-510 and USB car charger, the computer, or other power sources. Warning: For your safety, if you need to answer the headset, please disconnect it from the power source. LOW BATTERY: The headset needs to be recharged when it flashes red. POWER ON/OFF Power on: Long-press the multifunction button for about 6~8 seconds, till the status indicator light turns blue. Power off: Long-press the multifunction button for about 3~4 seconds, till the red status indicator light turns on. PAIRING and LINK Before using the headset for the first time, one must pair it with the Bluetooth® phone or other Bluetooth® devices. BTH-510 can pair up to eight (8) Bluetooth® devices or link to two Bluetooth® devices at the same time (double stand-by). Note that a few models of SonyEricsson mobile phones are unable to do double-standby with BTH-510. The following procedure describes how to do paring WORK WITH TWO Bluetooth® DEVICES BTH-510 can be linked to two Bluetooth® devices simultaneously. This is called dual-linking. This feature lets you control two Bluetooth® devices using a single headset. When your Bluetooth®headset is in the dual-linking state and there is an incoming call from handset A, then your headset will tear down the link to handset B. It will restore the link to handset B when the call from handset A is terminated. Note that some SonyEricsson handsets cannot do dual linking with BTH-510.USING BTH-510 Call answering: Short-press the multifunction button to answer an incoming call or to answer the call using the Bluetooth® device and then transfer the call to BTH-510. Call termination: Short-press the multifunction button to terminate an active call or hang up the call using the Bluetooth® device. Make a phone call: Make a phone call from the Bluetooth® device and the call will switch automatically to the headset. The procedure may be different depending on the setup of the Bluetooth® device.. Volume adjustment: Press the Volume Control Button back and forth to change the volume level during the call. Last-number redial: Double-click the multifunction button to redial the last number. Voice-activated dialing：Short-press the multifunction button and make a voice after you hear a beep to start dialing. The call may get transferred to the headset automatically. To use voice-activated dialing, one must enable the voice dialing capability on the Bluetooth® device. Make sure that the voice for activating the call is recorded in advance. Callrejection: Long-press the multifunction button for 2 seconds will reject the incoming call. Mute: Double-click the multifunction button will put the call on hold. In this case, the call is muted.Switch Calls: long-press the multifunction button for 2 seconds will switch an active call from the headset to the Bluetooth® device, or vice versa. Switch Calls During Dual-Linking: When the earphone is in the linked mode, short-press both the multi-function key and volume control key simultaneously, then the red indicator light will flash twice, and the dual-linking capability will be activated; by long press both keys, then the blue indicator light will flash twice, and the dual-linking capability will be deactivated. BTH-510 STATUS INDICATOR: StatusStatus Indicator LightStand-by Blue light flashes every 6 seconds Connect Blue light flashes 3 times every 10 seconds Talking Blue light flash every 10 seconds Powering off Red light is on steadily Pairing mode Blue/red lights flash alternatively Ringing Purple flashes Low battery Red flashes Charging battery Red light on for charging; light turns off when charging is done PRODUCT SPECIFICATIONS: Version: Bluetooth® 2.1+EDR, Class 2 Range: 10 meters Talk Time: About 5 hours Standby Time: Approximately 150 hours Charge Time: About 2 hours Power: 5V DC - 150 mA Battery Type: Lithium Ion CONTENT OF PACKAGE: Examine the package and make sure that it contains the following items. If any item is missing or damaged, please contact your sales agent immediately. One (1) Bluetooth® headset One (1) ear loop Three (3) ear tips in large, medium and small size One (1) USB charging cable One (1) User manual. Ю±¼«½¬ Þ´«»¬±±¬¸ Ø»¿¼-»¬ Ì®¿¼» Ò¿³» Ê»®Ì·¨ Ó±¼»´ Ò«³¾»® ÊßÒÌßÙÛ ÊÈï ÛËÌ Ð±©»® ο¬·²¹ ëÊÜÝô ïëð³ß º®±³ Þ¿¬¬»®§ б©»® ß¼¿°¬»® Ó¿²«º¿½¬«®»® ×òÌòÛò ÓÑÜÛÔæ ØÛÍðëóïîëðËðïë ×ñÐæ ïððóîìðÊô ëðóêðئô ðòîß ÑñÐæ ëÊô ðóðòïëß Ñ°»®¿¬·²¹ Ú®»¯«»²½§ ο²¹» îìðî ¢ îìèð Óئ Ì®¿²-³·¬ б©»®ìòðé¼Þ³øðòððîëëÉ÷Ó±¼«´¿¬·±² Ì»½¸²·¯«» ÙÚÍÕ º±® ïÓ¾°-å ñìóÜÏÐÍÕ º±® îÓ¾°-å èÜÐÍÕ º±® íÓ¾°- Ì®¿²-³·¬ Ü¿¬¿Î¿¬»Ò«³¾»® ±º ݸ¿²²»´- éç ݸ¿²²»´- ß²¬»²²¿ Í°»½·º·½¿¬·±² Ó«´¬·´¿§»® ݸ·° ß²¬»²²¿ ñ Ù¿·²æ îòë¼Þ·between BTH-510 and typical Bluetooth® phones. The pairing procedure to different Bluetooth® devices may vary depending on the brand and models. Please check the user manuals of those Bluetooth® devices for details. 1. Make sure your headset is turned off. 2. Press and hold the multifunction button till the red/blue status indicator lights flashes alternatively. 3. Follow the instruction of the phone manual to activate the Bluetooth® function on your phone and search for Bluetooth®devices.4. When the searching process is done, select TH-510?voice device.5. Enter the preset passkey ?000?and paring will be successful. At this point, the headset enters the stand-by mode. If the handset supports simplified paring capability, then there is no need to enter the passkey. If paring fails, then repeat steps 1 through 5 of the above procedure. 6. Confirm to link to the BTH-510 and the headset will enter the onnect?mode. When BTH-510 is turned on, it will automatically be linked to the last device to which it was linked to. NCC (DGT) NOTICE According to the Management Rules for low-power electromagnetic waves of electrical machinery, the product has been tested and found to comply with the related rules as follows: Rule 12: Any company, sales agent, or user are not allowed to change the frequency, to increase the power level, or to modify the characteristics or capabilities of the original design. Rule 24: The use of low-power electromagnetic waves of electrical machinery shall not affect the safety of flight objects or disturb legal communications. If it violates the rules, one shall stop using it till the problem is corrected. The legal communications mentioned above means wireless communications specified in the rules for governing the communications operations. The right of electrical machinery with low-power electromagnetic waves is lower than that of legal communications or industrial, scientific, or medical equipment that emit electromagnetic waves. ̸·- »¯«·°³»²¬ ¸¿- ¾»»² ¬»-¬»¼ ¿²¼ º±«²¼ ¬± ½±³°´§ ©·¬¸ ¬¸» ´·³·¬- º±® ¿ Ý´¿-- Þ ¼·¹·¬¿´ ¼»ª·½»ô °«®-«¿²¬ ¬± °¿®¬ ïë ±º ¬¸» ÚÝÝ ®«´»-ò ̸»-» ´·³·¬- ¿®» ¼»-·¹²»¼ ¬± °®±ª·¼» ®»¿-±²¿¾´» °®±¬»½¬·±² ¿¹¿·²-¬ ¸¿®³º«´ ·²¬»®º»®»²½» ·² ¿ ®»-·¼»²¬·¿´ ·²-¬¿´´¿¬·±²ò ̸·- »¯«·°³»²¬ ¹»²»®¿¬»-ô «-»- ¿²¼ ½¿² ®¿¼·¿¬» ®¿¼·± º®»¯«»²½§ »²»®¹§ ¿²¼ô ·º ²±¬ ·²-¬¿´´»¼ ¿²¼ «-»¼ ·² ¿½½±®¼¿²½» ©·¬¸ ¬¸» ·²-¬®«½¬·±²-ô ³¿§ ½¿«-» ¸¿®³º«´ ·²¬»®º»®»²½» ¬± ®¿¼·± ½±³³«²·½¿¬·±²-ò ر©»ª»®ô ¬¸»®» ·- ²± ¹«¿®¿²¬»» ¬¸¿¬ ·²¬»®º»®»²½» ©·´´ ²±¬ ±½½«® ·² ¿ °¿®¬·½«´¿® ·²-¬¿´´¿¬·±²ò ׺ ¬¸·- »¯«·°³»²¬ ¼±»- ½¿«-» ¸¿®³º«´ ·²¬»®º»®»²½» ¬± ®¿¼·± ±® ¬»´»ª·-·±² ®»½»°¬·±²ô ©¸·½¸ ½¿² ¾» ¼»¬»®³·²»¼ ¾§ ¬«®²·²¹ ¬¸» »¯«·°³»²¬ ±ºº ¿²¼ ±²ô ¬¸» «-»® ·- »²½±«®¿¹»¼ ¬± ¬®§ ¬± ½±®®»½¬ ¬¸» ·²¬»®º»®»²½» ¾§ ±²» ±® ³±®» ±º ¬¸» º±´´±©·²¹ ³»¿-«®»-æ óλ±®·»²¬ ±® ®»´±½¿¬» ¬¸» ®»½»·ª·²¹ ¿²¬»²²¿ò óײ½®»¿-» ¬¸» -»°¿®¿¬·±² ¾»¬©»»² ¬¸» »¯«·°³»²¬ ¿²¼ ®»½»·ª»®ò óݱ²²»½¬ ¬¸» »¯«·°³»²¬ ·²¬± ¿² ±«¬´»¬ ±² ¿ ½·®½«·¬ ¼·ºº»®»²¬ º®±³ ¬¸¿¬ ¬± ©¸·½¸ ¬¸» ®»½»·ª»® ·- ½±²²»½¬»¼ò óݱ²-«´¬ ¬¸» ¼»¿´»® ±® ¿² »¨°»®·»²½»¼ ®¿¼·±ñÌÊ ¬»½¸²·½·¿² º±® ¸»´°ò DZ« ¿®» ½¿«¬·±²»¼ ¬¸¿¬ ½¸¿²¹»- ±® ³±¼·º·½¿¬·±²- ²±¬ »¨°®»--´§ ¿°°®±ª»¼ ¾§ ¬¸» °¿®¬§ ®»-°±²-·¾´» º±® ½±³°´·¿²½» ½±«´¼ ª±·¼ §±«® ¿«¬¸±®·¬§ ¬± ±°»®¿¬» ¬¸» »¯«·°³»²¬ò ̸·- ¼»ª·½» ½±³°´·»- ©·¬¸ ﮬ ïë ±º ¬¸» ÚÝÝ Î«´»-ò Ñ°»®¿¬·±² ·- -«¾¶»½¬ ¬± ¬¸» º±´´±©·²¹ ¬©± ½±²¼·¬·±²-æ øï÷ ¬¸·- ¼»ª·½» ³¿§ ²±¬ ½¿«-» ¸¿®³º«´ ·²¬»®º»®»²½» ¿²¼ øî÷ ¬¸·- ¼»ª·½» ³«-¬ ¿½½»°¬ ¿²§ ·²¬»®º»®»²½» ®»½»·ª»¼ô ·²½´«¼·²¹ ·²¬»®º»®»²½» ¬¸¿¬ ³¿§ ½¿«-» «²¼»-·®»¼ ±°»®¿¬·±²

Navigation menu