YDI Wireless MR-1 2.4GHz INDOOR SIGNAL BOOSTER User Manual Introduction
YDI Wireless 2.4GHz INDOOR SIGNAL BOOSTER Introduction
Contents
- 1. MANUAL
- 2. RT 11788 Quick Start Guide
MANUAL
Max Ranger Quick Start Guide Figure 2 – Max Ranger LEDs Introduction The Max Ranger is an antenna with an integrated bidirectional amplifier used to extend the indoor range of 802.11b Wireless LAN cards. The Max Ranger is designed to be used with YDI/Agere PCMCIA WLAN cards that can be inserted into any suitable device such as an Access Point, YDI Ethernet Converter (EC), or even a laptop computer. It is easy to install and ready to work “right out of the box”. The internal antenna is horizontally polarized for optimum RF connection to other WLAN cards which typically are also horizontally polarized. It features over 300 mW (+25 dBm) of transmit power (EIRP). It is FCC Part 15 Certified for license-free operation with our Sidekick and Sapphire WLAN cards, and is capable to work in a temperature range of 0°C to +50°C. Red LED (Tx) Green LED (Rx) Max Ranger Kit Contents 1. 2. 3. Installation Antenna with integrated bi-directional amplifier and RF cable terminated in antenna connector for the YDI/Agere WLAN card YDI Sidekick Wireless LAN card 110/220 VAC to 5 VDC wall mount power supply The Max Ranger radio unit can be placed near the computer or device on a tabletop. 1. Remove the small black plastic cap from the proprietary antenna jack of the WLAN card with your finger nail or a small screwdriver. 2. Plug the RF cable that is attached at the bottom of the Max Ranger to the proprietary antenna jack on the WLAN card as shown on figure 3. Figure 1 – Max Ranger Kit CAUTION: The antenna connector is a tight push-on fit. Figure 3 – Connecting the Max Ranger to the WLAN Card Proprietary Antenna Connector. It must be inserted straight into the WLAN card. Warning: Insert this end into the WLAN card gently. Do not twist when removing it or you may damage the connector! Insert into a compatible Access Point, YDI EC, or Laptop computer LEDs Warning: Insert the WLAN card into the appropriate slot making sure that: Two LEDs are present on the front of the Max Ranger (see Figure 2): • • 1) The WLAN Card is upside (brand label must be visible) The Red LED flashes when the Max Ranger transmits data The Green LED indicates that the Max Ranger is in receive mode MNL-500120-001 – Rev 1.1 2) It slides smoothly across the internal rails of the slot 3) It is gently pushed all the way in 3. Plug the DC power connector into the jack at the bottom of the Max Ranger as shown on Figure 4. Push the cable into the notch in the base to insure the Max Ranger is stable on the tabletop. 4. Plug the power supply into a standard wall outlet. August 2003 Max Ranger Quick Start Guide Figure 4 – Plugging the DC Power Connector into the Bottom Jack of the Max Ranger Technical Support Your primary source of assistance is the dealer from which you purchased this product. The YDI support staff should only be contacted directly if you purchased this product directly from YDI. NOTE: Before you contact Technical Support, please make sure that you have read and thoroughly understood all instructions outlined on this manual. YDI Wireless 8000 Lee Highway Falls Church, VA 22042 USA Tel.: 703-205-0600 Fax: 703-205-0610 E-mail: tech@ydi.com www.ydi.com The latest software and User’s Manuals can also be found at: http://www.ydi.com/support/downloads.php Operation 1. 2. http://www.ydi.com/support/documents.php To find the best position for your Max Ranger, YDI recommends to use the Signal Strength Indicator found on the Link Test screen of the Wireless Client Manager for your WLAN card. You can also use the YDI Client Manager for EC. For a detailed explanation on how to use each software, please refer to the User’s Manual of your specific product. FCC NOTICE This antenna/transmitter device complies with FCC radiation exposure limits set forth for an uncontrolled environment when installed as directed. The antenna used for this transmitter must be installed and operated with a minimum separation distance of at least 20 centimeters (8 inches) from all persons during normal operation, and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must adhere to the antenna installation instructions and transmitter operating conditions in order to comply with the FCC’s RF exposure requirements. Aim the Max Ranger by turning it back and forth until the maximum signal strength is reached. Antenna Patterns The Max Ranger boosts the signal the most in the front and back directions (Figure 5a) as well as out of the top (Figure 5b). The weakest signal will be at the bottom and sides. Figure 5a Top View Showing the Strongest Signal Facing the Flat Parts This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: Figure 5b Side View Showing the Maximum Coverage Area Out of the Top and Sides (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. The Max Ranger is certified by the FCC for use with the PC24E-11-FC/R series of YDI Wireless LAN cards made by Agere. To see all our FCC certified systems, please visit: http://www.ydi.com/deployinfo/fcc-info.php August 2003 MNL-500120-001 – Rev 1.1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Modify Date : 2003:08:21 11:32:35-03:00 Create Date : 2003:08:21 11:31:22-04:00 Page Count : 2 Creation Date : 2003:08:21 15:31:22Z Mod Date : 2003:08:21 15:31:22Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : Jose Salernitano Metadata Date : 2003:08:21 15:31:22Z Creator : Jose Salernitano Title : Introduction Page Mode : UseNone Tagged PDF : YesEXIF Metadata provided by EXIF.tools