YEALINK T29G IP Phone User Manual 29 8

Download:
Mirror Download [FCC.gov]
Document ID	2406957
Application ID	R1LzxQvmvkL26Ww72iXeTw==
Document Description	Users Manual Part Two
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.31kB (128866 bits)
Date Submitted	2014-09-30 00:00:00
Date Available	2014-09-30 00:00:00
Creation Date	2014-09-30 14:35:45
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2014-09-30 14:35:45
Document Title	29-8
Document Creator	Adobe Illustrator CS5
Document Author:	Johnc

Configuring Your Phone
Configuring via web user interface
Accessing the web user interface:
1. Press the OK key when the phone is idle to obtain the IP address of the phone.
2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10"
or "192.168.0.10") and then press the Enter key.
3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.
Network Settings: Click on Network->Basic->IPv4 Config
You can configure the network settings in the following ways:
DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid network settings,
e.g., IP address, subnet mask, gateway address and DNS address.
Static IP Address: If your phone can not contact a DHCP server for any reason, you need to configure the IP address,
subnet mask, gateway address, primary DNS address and secondary DNS address for the phone
manually.
PPPoE: If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE mode. Contact the
ITSP for the account and password.
Note: Wrong network settings may result in the inaccessibility of your phone and may have an impact on the
network performance. Contact your system administrator for more information.
Account Settings: Click on Account->Register->Account X (X=1,2,3...15,16)
Parameters of the account:
Register Status:
It shows the register status of the current account.
You can select Enabled/Disabled to enable/disable the account.
Line Active:
It is shown on the LCD screen to identify the account.
Label:
It is shown as caller ID when placing a call.
Display Name:
User Name:
It is provided by ITSP for registration (required).
It is an authenticated ID for authentication provided by ITSP (required).
Register Name:
It is provided by ITSP for registration (required).
Password:
It is provided by ITSP for registration (required).
Server Host:
Register status icons on the LCD screen:
(Green) Registered
(Gray) Register Failed
(Yellow) Registering
Note: Check with your system administrator if any error appears during the registration process or a specific
configuration is required for your registration.
Configuring via phone user interface
Network Settings:
Press the Menu soft key when the phone is idle, select Advanced (password: admin)->Network-> WAN Port/VLAN/Web Server/
802.1x /VPN/LLDP/CDP/NAT to configure the network.
Account Settings:
Press the Menu soft key when the phone is idle, select Advanced (password: admin)->Accounts to configure the
account.
Note: For more information on account parameters, refer to Configuring via web user interface.
Basic Call Features
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press the Send soft key.
Using the headset:
1. With the headset connected, press
to activate the headset mode.
2. Enter the number, and then press the Send soft key.
Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes by
pressing the HEADSET key, the Speakerphone key or by picking up the handset. Headset mode requires a
connected headset .
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
Using the headset:
Press
Note: You can ignore an incoming call by pressing the Reject soft key.
Ending a Call
Using the handset:
Hang up the handset or press the End Call soft key.
Using the speakerphone:
Press
or the End Call soft key.
Using the headset:
Press the End Call soft key.
Redial
Press
soft key.
to enter the Placed list, press
Press
twice when the phone is idle to dial out the last dialed number.
or
to select the desired entry, and then press
or the Send
Call Mute and Un-mute
Press
to mute the microphone during a call.
Press
again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press
or the Hold soft key during an active call.
To resume the call, do one of the following:
If there is only one call on hold, press
or the Resume soft key.
If there is more than one call on hold, press
Resume soft key.
or
to select the desired call, and then press
or the
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press
or the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press
or the Transfer soft key.
Semi-Attended Transfer
1. Press
or the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press
or the Transfer soft key when you hear the ring-back tone.
Attended Transfer
1. Press
or the Transfer soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press
or the Transfer soft key when the second party answers.
Call Forward
To enable call forward:
1. Press the Menu soft key when the phone is idle, and then select Features->Call Forward.
2. Select the desired forward type:
Always Forward----Incoming calls are forwarded unconditionally.
Busy Forward----Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For No Answer Forward, press
to wait before forwarding.
or
to select the desired ring time
4. Press the Save soft key to accept the change.
Call Conference
1. Press
or the Conference soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press
or the Conference soft key again when the second party answers. All parties are now joined in the conference.
4. Press the End Call soft key to disconnect all parties.
Note: You can split the conference call into two individual calls by pressing the Split soft key.
Speed Dial
To configure a speed dial key:
1. Press the Menu soft key when the phone is idle, and then select Features->DSS Keys.
2. Select the desired DSS key, and then press the Enter soft key.
3. Select Speed Dial from the Type field, select the desired line from the Account ID field, enter a label in the Label field
and enter the number in the Value field.
4. Press the Save soft key to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
Voice Message
Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message
center. The power indicator LED slowly flashes red.
To listen to voice messages:
or the Connect soft key.
1. Press
2. Follow the voice prompts to listen to your voice messages.
Customizing Your Phone
Call History
1. Press the History soft key when the phone is idle, press
2. Select an entry from the list, you can do the following:
Press the Send soft key to call the entry.
Press the Delete soft key to delete the entry from the list.
or
to scroll through the list.
If you press the Option soft key, you can also do the following:
Select Detail to view detailed information about the entry.
Select Add to Contacts to add the entry to the local directory.
Select Add to Blacklist to add the entry to the blacklist.
Select Delete All to delete all entries from the list.
Contact Directory
To add a contact:
1. Press the Directory soft key when the phone is idle, and then select the desired group.
2. Press the Add soft key to add a contact.
3. Enter a unique contact name in the Name field and contact numbers in the corresponding fields.
4. Press the Save soft key to accept the change.
To edit a contact:
1. Press the Directory soft key when the phone is idle, and then select the desired group.
2. Press
or
to select the desired contact, press the Option soft key and then select Detail from the prompt list.
3. Edit the contact information.
4. Press the Save soft key to accept the change.
To delete a contact:
1. Press the Directory soft key when the phone is idle, and then select the desired group.
2. Press
or
to select the desired contact, press the Option soft key and then select Delete from the prompt list.
3. Press the OK soft key when the LCD screen prompts “Delete selected item?”.
Note: You can add contacts from call history easily. For more information, refer to Call History above.
Volume Adjustment
Press
during a call to adjust the receiver volume of the handset/speakerphone/headset.
Press
when the phone is idle to adjust the ringer volume.
Ring Tones
1. Press the Menu soft key when the phone is idle, and then select Basic->Sound->Ring Tones.
2. Press
or
to select the desired ring tone.
3. Press the Save soft key to accept the change.
About us
Founded in 2001, Yealink, the global TOP 3 SIP phone provider and a leading provider of VoIP Phone and IP communication
solutions, has been focusing on VoIP products characterized by reliable quality, easy deployment and affordable price for more
than a decade. Today, customers from over 140 countries rely on Yealink as the backbone of global collaboration to extend the
value of network communications.
More about Yealink
Since 2001, Yealink has continued to develop state-of-the art, hi-tech VoIP communication terminals that include IP video
phones, IP phones and USB phones. With a worldwide market in more than 140 countries, the company has also established
a first-class international service network.
Our priorities are quality, functionality, ease-of-use, customer support and competitive pricing. To provide new solutions for the
future in this fast-evolving sector, Yealink’s large, talented and highly-experienced VoIP R&D team is totally committed to the
pursuit of excellence.
To date, we have passed more than 80 interoperability tests and meet certification requirements set by leading VoIP system and
platforms. Yealink works in close partnership with T-Mobile, Telefonica, Portugal Telecom and other leading telecommunication
service providers.
YEALINK NETWORK TECHNOLOGY CO., LTD.
Email: sales@yealink.com
Web: www.yealink.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Johnc
Create Date                     : 2014:09:30 14:35:45-07:00
Modify Date                     : 2014:09:30 14:35:45-07:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : 29-8
Creator                         : Johnc
Metadata Date                   : 2014:09:30 17:14:39+08:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 256
Thumbnail Height                : 172
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 14843 bytes, use -b option to extract)
Instance ID                     : uuid:ebf72eac-4f36-4dda-9ee0-23fbefff16cb
Document ID                     : xmp.did:D7B5B991D146E4119207C0BC299571F2
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:5a40bb19-fb09-7a42-a9b9-d0e08232b889
Derived From Document ID        : xmp.did:FB7F11740720681188C6FF3AA427A1D8
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved
History Instance ID             : xmp.iid:D7B5B991D146E4119207C0BC299571F2
History When                    : 2014:09:28 13:53:13+08:00
History Software Agent          : Adobe Illustrator CS5
History Changed                 : /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 148.000958
Max Page Size H                 : 210.001652
Max Page Size Unit              : Millimeters
Font Name                       : 104-CAI978, 096-CAI978
Font Family                     : 104-CAI978, 096-CAI978
Font Face                       : Regular, Regular
Font Type                       : TrueType, TrueType
Font Version                    : Version 1.00 January 3, 1999, initial release, Version 1.00 December 13, 1998, initial release
Font Composite                  : False, False
Font File Name                  : 104-CAI978.TTF, 096-CAI978.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 鲜艳
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Acrobat Distiller 11.0 (Windows)
Page Count                      : 5

EXIF Metadata provided by EXIF.tools