Yaesu Musen 20445X20 AMATEUR RADIO WITH SCANNING RECEIVER User Manual 7

Download:
Mirror Download [FCC.gov]
Document ID	2766371
Application ID	v0VShCatVJ6EsUzhGL7dDg==
Document Description	User Manual 7
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	329.14kB (4114270 bits)
Date Submitted	2015-09-29 00:00:00
Date Available	2015-12-28 00:00:00
Creation Date	2015-09-29 08:57:25
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-09-29 08:57:36
Document Title	User Manual 7
Document Creator	Adobe InDesign CS6 (Windows)

Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Functions Used As Needed
Set mode option No./
Reference
Setting Item
Description of function
setting Item
page
(Bold letters: Default)
9-6 APRS MSG GROUP Set group filter for receiving mes- G1: ALL******
–
sages.
G2: CQ*******
G3: QST******
G4: YAESU****
G5:
B1: BLN******
B2: BLN*
B3: BLN*
9-7 APRS MSG TXT
Enter standard message text 1 to 1 to 8 ch
–
7ch
9-8 APRS MUTE
Turn on/off the B-band AF muting ON / OFF
–
function when APRS is set.
9-9 APRS POPUP
Set such as a beacon type, mes- Mic-E:
–
sage type and time for pop-up OFF / ALL2s to ALL60s /
display.
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
POSITION:
OFF / ALL2s to ALL60s /
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
WEATHER:
OFF / ALL2s to ALL60s /
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
OBJECT:
OFF / ALL2s to ALL60s /
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
ITEM:
OFF / ALL2s to ALL60s /
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
STATUS:
OFF / ALL2s to ALL60s /
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
OTHER:
OFF / ALL2s to ALL60s /
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
MY PACKET:
OFF / ALL2s to ALL60s /
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
MSG:
OFF / ALL2s to ALL60s /
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
100
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Set mode option No./
setting Item
9-9 APRS POPUP
Description of function
Set the beacon type, the message
type and the time of the popup
display.
Turn on/off the bell when a beacon is received.
9-11 APRS UNIT
Select the units for APRS display.
9-12 APRS TX DELAY
Set the data sending delay time.
Functions Used As Needed
9-10 APRS RINGER
Reference
Setting Item
page
(Bold letters: Default)
GRP:
–
OFF / ALL2s to ALL60s /
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
BLN:
OFF / ALL2s to ALL60s /
ALLCNT / BND2s to BND60s /
BNDCNT ALL10s
MY MSG:
OFF / BND2s to BND60s /
BND10s
DUP.BCN:
OFF / BND2s to BND60s /
BND10s
DUP.MSG:
OFF / BND2s to BND60s /
BND10s
ACK.REJ:
OFF / BND2s to BND60s /
BND10s
OTHER MSG:
OFF / BND2s to BND60s /
BND10s
Mic-E: ON / OFF
–
POSITION: ON / OFF
WEATHER: ON / OFF
OBJECT: ON / OFF
ITEM: ON / OFF
STATUS: ON / OFF
OTHER: ON / OFF
MY PACKET: ON / OFF
MSG: ON / OFF
GRP: ON / OFF
BLN: ON / OFF
MY MSG: ON / OFF
DUP.BCN: ON / OFF
DUP.MSG: ON / OFF
ACK.REJ: ON / OFF
OTHER MSG: ON / OFF
TX BCN: ON / OFF
TX MSG: ON / OFF
Position: MM.MM' / MM'SS'
–
Distance: km / mile
Speed: km/h / knot / mph
Altitude: m / ft
Temp: °C / °F
Rain: mm / inch
Wind: m/s / mph
100ms / 150ms / 200ms /
–
250ms / 300ms / 400ms /
500ms / 750ms / 1000ms
101
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Set mode option No./
setting Item
9-13 BEACON INFO
Functions Used As Needed
Setting Item
(Bold letters: Default)
Set the transmission beacon in- AMBIGUITY:
formation.
OFF / 1 dig to 4dig
SPD / CSE: ON / OFF
ALTITUDE: ON / OFF
9-14 BEACON
Set a beacon automatic sending 30sec / 1min / 2min / 3min /
INTERVAL
interval.
5min / 10min / 15min / 20min /
30min / 60min
9-15 BEACON STATS
Input setting for status text.
S.TXT: ON / OFF
TXT
TX RATE: 1/1 to 1/8
1 to 5 CH
9-16 BEACON TX
Select automatic or manual send- AUTO / MANUAL / SMART
ing of beacon.
9-17 COM PORT
Set the COM port.
STATUS: ON / OFF
SETTING
SPEED:
4800 / 9600 / 19200 / 38400
INPUT: OFF / GPS
OUTPUT: OFF / GPS / WAY.P
WAYPOINT:
NMEA9 / NMEA6 / NMEA7 /
NMEA8
Mic-E: ON / OFF
POSIT: ON / OFF
WEATHER: ON / OFF
OBJECT: ON / OFF
ITEM: ON / OFF
9-18 DIGI PATH
Select a digital repeater route.
P1 OFF
P2 1 WIDE1-1
P3 1 WIDE1-1 / 2 WIDE2-1
P4 1 · · · · · · – · · / 2 · · · · · · – · ·
P5 1 · · · · · · – · · / 2 · · · · · · – · ·
P6 1 · · · · · · – · · / 2 · · · · · · – · ·
P7 1 · · · · · · – · · / 2 · · · · · · – · ·
P8 1 · · · · · · – · · to 8 · · · · · · – · ·
9-19 GPS DATUM
Select a datum used for the GPS WGS-84 / Tokyo Mean /
function.
Tokyo Japan / Tokyo Korea /
Tokyo Okinawa
9-20 GPS POWER
Turn on/off the GPS function.
GPS ON / GPS OFF
9-21 GPS TIME SET
Turn on/off the GPS time and date AUTO / MANUAL
automatic acquisition function.
9-22 GPS UNIT
Select the units for GPS display. Position: .MMM' / 'SS''
Speed: km/h / Knot / mph
Altitude: m / ft
9-23 CALLSIGN (APRS) Specify the callsign of your sta–
tion.
9-24 MY POSITION
Set the position for your station. GPS / Lat N * **°**.**' /
LON* **°**.**'
P1 to P10
9-25 MY SYMBOL
Set the symbol for your station.
45 Icon
102
Description of function
Reference
page
–
–
–
–
–
–
–
–
–
–
–
–
–
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Set mode option No./
setting Item
9-26 POSITION
COMMENT
Reference
Setting Item
page
(Bold letters: Default)
Set up the position comment func- Off Duty / En Route /
–
tion.
In Service / Returning /
Committed / Special / Priority /
Custom 0 to 6 / EMERGENCY!
9-27 SmartBeaconing Set the smart beaconing function. STATUS:
–
OFF / TYPE1 / TYPE2 / TYPE3
LOW SPD: 2mph to 30mph
HIGH SPD: 31mph to 90mph
SLOW RATE: 1min to 100min
FAST RATE: 10sec to 180sec
TURN ANGL: 5° to 90°
TURN SLOP: 1 to 255
TURN TIME: 5sec to 180sec
9-28 TIME ZONE
Set the time zone.
UTC ±13.0 H / UTC+0:00
–
* For more details of functions, refer to the APRS Section in the instruction manual.
10 SD CARD
10-1 BACKUP
Write or read the information Write to SD / Read from SD
138
about your transceiver into or
from the micro SD memory card.
10-2 MEMORY CH
Write or read the memory channel Write to SD / Read from SD
138
information into or from the micro
SD memory card.
10-3 GROUP ID
Write or read GROUP ID infor- Write to SD / Read from SD
139
mation into or from the micro SD
memory card.
10-4 FORMAT
Format the micro SD memory Format
24
card.
11 OPTION
11-1 USB CAMERA
Set the USB CAMERA image size SIZE: 160×120 / 320×240
140
and resolution.
QUALITY: LOW / NORMAL /
HIGH
12 CALLSIGN
Set the CALLSIGN.
–
141
Description of function
When using the GPS function, you can display the GPS information on the LCD.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [1 GPS INFO].
Press H to display the GPS information on the LCD.
Functions Used As Needed
Displaying the GPS screen.
103
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Setting the display method of the remote station information
Set the display method of the remote station information when using the GM Function.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [2 TARGET LOCATION].
Press H.
Turn O to select the display method.
COMPASS: Compass appears.
NUMERIC: Longitude and latitude appear.
Press p to set the selected display method, and exit from
the Set mode.
Caution
When the NUMERIC is selected, only the location information of the remote station appears on the
LCD. The BACKTRACK function is not activated.
Setting the display method for BACKTRACK
You can set the BACKTRACK screen display method.
Enter the Set mode:
Functions Used As Needed
104
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [3 COMPASS].
Press H.
Turn O to select the display method.
HEADING UP: Heading direction is indicated upward.
NORTH UP: North direction is indicated upward.
Press p to save the selected display setting and exit the
set mode.
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Setting the search channels for the BAND SCOPE function
You can set the number of channels to be displayed for the band scope when the BAND
SCOPE function is used.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [4 BAND SCOPE].
Press H.
Turn O to select the number of channels to search for.
11ch / 19ch / 33ch / 49ch / 101ch
Remark
Default: 33ch
7 Press p to set the number of channels to search for, and
exit the Set mode.
Changing the Lighting Condition
You can change the LCD and key lighting condition.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [5 LAMP].
Press H.
Turn O to select a lighting condition.
Select a lighting condition with reference to the following
table:
Display
Lighting Condition
2 SEC (KEY) to
10 SEC (KEY)
When O dial or a key is pressed, the LCD
and keys light up for the set time.
CONTINUOUS
The LCD and keys light up continuously.
OFF
The LCD and keys do not light.
Remark
Default: Key, 5 seconds
䎶䎨䎷䎝䎃䎃䎔䎃 䎧 䎬 䎶 䎳䎯䎤䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎕䎃 䎷䎻 䎒 䎵䎻
䎃䎃䎃䎃䎃䎃䫹䎃 䎖䎃 䎰䎨䎰䎲䎵䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎗䎃 䎶 䎬 䎪䎱䎤䎯 䎬 䎱䎪
䎘䎃
䎃䎙䎃
䎃 䎚䎃
䎃 䎛䎃
䎯 䎤䎰䎳
䎯 䎤䎱䎪䎸䎤䎪 䎨
䎯 䎦䎧䎃 䎦䎲䎱䎷䎵䎤䎶䎷
䎯 䎦䎧䎃 䎧 䎬 䎰䎰䎨䎵
䎃 䎘䎃 䎯 䎤䎰䎳
䎃 䎃䎃䎃 䎃 䎮 䎨 䎼䎃 䎘 䏖䏈䏆
䎃
Functions Used As Needed
7 Press p to save the lighting condition, and exit the Set mode.
105
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Selecting a Display Language
You can select a display language from Japanese and English.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [6 LANGUAGE].
Press H.
Turn O to select a language.
Select [JAPANESE] or [ENGLISH].
Remark
Default: Japanese
7 Press p to save the selected display language, and exit
the Set mode.
䎶䎨䎷䎝䎃䎃䎔䎃 䎧 䎬 䎶 䎳䎯䎤䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎕䎃 䎷䎻 䎒 䎵䎻
䎃䎃䎃䎃䎃䎃䫹䎃 䎖䎃 䎰䎨䎰䎲䎵䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎗䎃 䎶 䎬 䎪䎱䎤䎯 䎬 䎱䎪
䎙䎃
䎃䎚䎃
䎃 䎛䎃
䎃 䎜䎃
䎯 䎤䎱䎪䎸䎤䎪 䎨
䎯 䎦䎧䎃 䎦䎲䎱䎷䎵䎤䎶䎷
䎯 䎦䎧䎃 䎧 䎬 䎰䎰䎨䎵
䎲䎳䎨䎱 䎬 䎱䎪䎃 䎰䎨䎶䎶䎤䎪䎨
䎃 䎙䎃 䎯 䎤䎱䎪䎸䎤䎪 䎨
䎃 䎃䎃䎃 䎃 䎨 䎱䎪䎯 䎬 䎶 䎫
䎃
Adjusting the LCD Contrast Level
You can adjust the LCD contrast level.
Enter the Set mode:
Functions Used As Needed
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [7 LCD CONTRAST].
Press H.
Turn O to select a contrast level.
Select from among LEVEL 1 (LIGHT) to LEVEL 15 (DARK).
Remark
Default: LEVEL 7
䎶䎨䎷䎝䎃䎃䎔䎃 䎧 䎬 䎶 䎳䎯䎤䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎕䎃 䎷䎻 䎒 䎵䎻
䎃䎃䎃䎃䎃䎃䫹䎃 䎖䎃 䎰䎨䎰䎲䎵䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎗䎃 䎶 䎬 䎪䎱䎤䎯 䎬 䎱䎪
䎚䎃
䎃䎛䎃
䎃 䎜䎃
䎔䎓䎃
䎯 䎦䎧䎃 䎦䎲䎱䎷䎵䎤䎶䎷
䎯 䎦䎧䎃 䎧 䎬 䎰䎰䎨䎵
䎲䎳䎨䎱 䎬 䎱䎪䎃 䎰䎨䎶䎶䎤䎪䎨
䎶䎨 䎱䎶䎲䎵䎃 䎬 䎱 䎩䎲
7 Press p to save the selected contrast, and exit the Set
106
mode.
䎃 䎚䎃 䎯 䎦䎧䎃 䎦䎲䎱䎷䎵䎤䎶䎷
䎃 䎃䎃䎃 䎃䎯 䎨䎹 䎨 䎯䎃 䎚
䎃
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Adjusting the LCD Backlight and Keypad Key
Light Brightness Level
You can adjust the brightness level of the LCD backlight and keypad key light.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [8 LCD DIMMER].
Press H.
Turn O to select a brightness level.
You can select from LEVEL 1 (DARK) to LEVEL 6 (BRIGHT).
Remark
Default: LEVEL 6
䎶䎨䎷䎝䎃䎃䎔䎃 䎧 䎬 䎶 䎳䎯䎤䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎕䎃 䎷䎻 䎒 䎵䎻
䎃䎃䎃䎃䎃䎃䫹䎃 䎖䎃 䎰䎨䎰䎲䎵䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎗䎃 䎶 䎬 䎪䎱䎤䎯 䎬 䎱䎪
䎛䎃 䎯 䎦䎧䎃 䎧 䎬 䎰䎰䎨䎵
䎃䎜䎃 䎲䎳䎨䎱 䎬 䎱䎪䎃 䎰䎨䎶䎶䎤䎪䎨
䎔䎓䎃 䎶䎨 䎱䎶䎲䎵䎃 䎬 䎱 䎩䎲
䎔䎔䎃䎃䎶䙵䎰䎨䎷 䎨䎵䎃 䎶䎼䎰䎥䎲䎯
7 Press p to save the selected display brightness level, and
exit the Set mode.
䎃 䎛䎃 䎯 䎦䎧䎃 䎧 䎬 䎰䎰䎨䎵
䎃 䎃䎃䎃䎃䎃䎯 䎨䎹 䎨 䎯䎃 䎙
䎃
Changing the Opening Message Displayed
Immediately after Power-on
You can select the message displayed under the “YAESU” logo from among four types:
“no message”, “power supply voltage”, “message comprising up to 16 characters”, and
“callsign”.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [9 OPENING MESSAGE].
Press H.
Functions Used As Needed
107
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
6 Turn O to select the display method.
Select a message type with reference to the following table:
Remark
Default: CALLSIGN
Display
Display Condition
NORMAL
The YAESU logo appears immediately after power-on.
OFF
Immediately after power-on, the reception frequency, etc. appear without displaying an opening message.
DC
The power supply voltage and time appear immediately after power-on.
MESSAGE
A message comprising up to 16 characters appears immediately after power-on.
Pressing H displays the message registration
screen. Enter a message to be displayed following
the procedure described in “Assigning a Name to a
Memory Channel” (See page 47).
CALLSIGN
Your callsign appears immediately after power-on.
7 Press p to save the selected display method, and exit from the Set mode.
Measuring the Battery Voltage and the Transceiver Temperature
Power Supply Voltage Measurement Function/Temperature
Measurement Function
You can measure the battery voltage and the temperature inside the transceiver. When
the optional external power supply adapter with a cigarette plug (SDD-13) is connected,
the power supply voltage of this adapter is measured.
Enter the Set mode:
Functions Used As Needed
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [10 SENSOR INFO].
Press H.
The voltage and temperature appear on the LCD.
Remark
When the temperature appears on the LCD, pressing V
toggles the unit of temperature display between °C and °F.
7 Press M.
8 Press p to exit from the Set mode.
108
䎶䎨䎷䎝䎃䎃䎔䎃 䎧 䎬 䎶 䎳䎯䎤䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎕䎃 䎷䎻 䎒 䎵䎻
䎃䎃䎃䎃䎃䎃䫹䎃 䎖䎃 䎰䎨䎰䎲䎵䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎗䎃 䎶 䎬 䎪䎱䎤䎯 䎬 䎱䎪
䎔䎓䎃 䎶䎨 䎱䎶䎲䎵䎃 䎬 䎱 䎩䎲
䎔 䎔䎃䎃䎶䙵䎰䎨䎷 䎨䎵䎃 䎶䎼䎰䎥䎲䎯
䎃 䎔䎃 䎪䎳䎶䎃 䎬 䎱 䎩䎲
䎃 䎕䎃 䎷䎤䎵䎪䎨䎷䎃 䎯 䎲䎦䎤䎷 䎬 䎲䎱
䎔䎓䎃 䎶䎨 䎱䎶䎲䎵䎃 䎬 䎱 䎩䎲
䎃 䎃䎃䎃䎹 䎲䎯䎷䫹 䎝䎃䎃䎃䎃䎯 䏌 䏗䎃䎃䎚 䎑 䎗 䎹
䎃䎃䎃䎃䎃䎷 䎨䎰䎳䫹 䎝䎃䎃䎃䎃䎃䎃 䎚 䎚䫹q䎩
䎃
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Tips
• The display changes as follows depending on the type of the power supply used.
Battery pack: “Lit”
Battery case: “Dry”
External power supply adapter: “Ext”
• During mono band reception, the voltage can be displayed on the LCD constantly (See page 27).
• This function displays the temperature inside the transceiver.
• In a situation where the temperature inside of the transceiver does not rise (e.g., standby reception),
you can know the approximate outside temperature from the temperature displayed on the LCD.
Changing the Display Pattern of the PO Meter
You can select a display pattern of the S/PO meter from among four types.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [1 DISPLAY].
Press H.
Turn O to select [11 S-METER SYMBOL].
Press H.
Turn O to select a display pattern.
Remark
Default:
7 Press p to save the selected display pattern, and exit from
the Set mode.
Switching between AM Antennas
Reducing receiver sensitivity
Attenuator (ATT) Function
If the signal from the remote station is too strong or, a strong signal is present nearby that
interferes with reception, use the attenuator (ATT) function.
Enter the Set mode:
1 Press and hold M for over 1 second.
2 Turn O to select [2 TX/RX].
3 Press H.
Functions Used As Needed
You can switch antennas when listening to AM broadcast stations.
For details, see “Switching between AM Antennas” on page 33.
109
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Turn O to select [1 MODE].
Press H.
Turn O to select [2 ANTENNA ATT].
Press H.
Turn O to select [ON].
Remark
Default: OFF
9 Press p to save the attenuator function setting, and exit
the Set mode.
Tip
• The amount of attenuation by the attenuator (ATT) is about 10 dB.
Setting the transmission modulation level
You can set the transmission modulation level to half of its usual level.
Set [OFF] for normal amateur operation.
Enter the Set mode:
Functions Used As Needed
Press and hold M for over 1 second.
Turn O to select [2 TX/RX].
Press H.
Turn O to select [1 MODE].
Press H.
Turn O to select [3 HALF DEVIATION].
Press H.
Turn O to select [ON]
Remark
Default: OFF
9 Press p to save the transmission modulation level is set,
110
and exit the Set mode.
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Changing the mode manually
Manually switch to an optimum mode (radio wave type) according to the frequency band.
For more details, see “Changing the Mode Manually” on page 38.
Switching between digital and analog mode
You can set digital and analog mode switching and digital transmission mode.
Enter the Set mode:
1 Press and hold M for over 1 second.
2 Turn O to select [2 TX/RX].
3 Press H.
4 Turn O to select [2 DIGITAL].
5 Press H.
6 Turn O to select [1 DIGITAL MODE].
7 Press H.
8 Turn O to select [MODE].
9 Press H.
10 Turn O to select your desired mode.
Functions Used As Needed
DIGITAL: Transmit and receive in the digital mode.
ANALOG: Transmit and receive in the analog mode.
AMS (Automatic Mode Select):
Tune to the transmission and reception mode of the remote
station from which a signal is automatically received.
11 Press M.
12 Turn O to select [DIGI TX].
13 Press H.
14 Turn O to select a reception mode.
DN: 
Usual digital communication mode. Conversation is
infrequently interrupted even under low power level.
VW: (Voice Wide) Full rate high quality sound mode This is the transmission function
to prioritize the sound quality when the communication condition of the remote
station is relatively good.
15 Press p to save the setting and exit the Set mode.
111
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Setting the AMS transmission mode
Functions Used As Needed
When operating in the AMS function, the transmit mode may be selected:
1 Press and hold M for over 1 second.
2 Turn O to select [2 TX/RX].
3 Press H.
4 Turn O to select [2 DIGITAL].
5 Press H.
6 Turn O to select [1 DIGITAL MODE].
7 Press H.
8 Turn O to select [AMS MODE].
9 Press H.
10 Turn O to select the AMS transmit mode.
TX M: The operating mode is automatically selected
from four communication modes to match the
received signal. Pressing the Microphone [PTT]
momentarily, toggles between the Digital and
Analog communication modes.
TX FM: The RX mode is automatically selected from the
four communication modes to match the received
signal. The TX mode is automatically changed to
the “FM” mode.
TX DN: The RX mode is automatically selected from the
four communication modes to match the received
signal. The TX mode is automatically changed to
the “DN” mode.
TX VW: The RX mode is automatically selected from the four communication modes
to match the received signal. The TX mode is automatically changed to the
“VW” mode.
AUTO: The RX and TX operating mode is automatically selected from the four
communication modes to match the received signal.
Remarks • Default: TX M
• Blink “ ▎
” : TX M
Blink “ ▎OO” : TX FM / TX DN / TX VW
The OO symbol display differs according to the received signal.
11 Press p to save the setting and exit the Set mode.
112
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Setting the squelch type for the digital mode
You can set the squelch type for the digital mode.
Enter the Set mode:
1 Press and hold M for over 1 second.
2 Turn O to select [2 TX/RX].
3 Press H.
4 Turn O to select [2 DIGITAL].
5 Press H.
6 Turn O to select [2 SQL TYPE].
7 Press H.
8 Turn O to select [SQL TYPE].
9 Press H.
10 Turn O to select a squelch type.
OFF: Voice is always output upon receiving a digital signal
from a Yaesu transceiver.
CODE: Voice is output only when receiving a signal with a
corresponding SQL CODE.
BREAK: 
Voice is output regardless of any squelch code
when the remote station transmits with BREAK set.
11 Press M.
12 Turn O to select [SQL CODE].
13 Press H.
14 Turn O to enter a code.
You can enter SQL CODE of 126 types from 001 to 126.
15 Press p to save the SQL CODE setting and exit the Set mode.
You can set the time duration to display the remote station information, such as callsign,
on the LCD.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [2 TX/RX].
Press H.
Turn O to select [2 DIGITAL].
Press H.
Functions Used As Needed
Setting the pop up time of the remote station information
113
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
6 Turn O to select [3 DIGI POPUP].
7 Press H.
8 Turn O to select the display method.
OFF: D
 oes not display the remote station information.
BND2s to 60s: Set the time to display the remote station
information (2 to 60 seconds).
BNDCNT: Always display the remote station information.
Remark Default: 10 seconds
9 Press p to save the pop up time setting and exit the Set mode.
Setting the Standby Beep
When communicating in a digital mode, a beep is sounded after the end of the other
stations transmission.
1 Press and hold M for over 1 second.
2 Turn O to select [2 TX/RX].
3 Press H.
4 Turn O to select [2 DIGITAL].
5 Press H.
6 Turn O to select [5 STANDBY BEEP].
7 Press H.
8 Turn O to select [OFF]/[ON].
OFF: Disable the STANDBY BEEP feature.
ON: Enable the STANDBY BEEP feature.
Remark Default: ON
9 Press p to exit from the Set mode.
Functions Used As Needed
114
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Displaying the version of the DSP program
You can check the DSP program version of the built in digital unit of the transceiver.
First enter the digital mode, and then enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [2 TX/RX].
Press H.
Turn O to select [2 DIGITAL].
Press H.
Turn O to select [6 DSP Ver].
Press H.
The version of the DSP program appears on the LCD.
Press p to exit from the Set mode.
Adjusting the microphone sensitivity
Microphone Gain
You can adjust the input level of the built-in microphone or an optional external microphone.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [2 TX/RX].
Press H.
Turn O to select [3 AUDIO].
Press H.
Turn O to select [1 MIC GAIN].
Press H.
Turn O to select a microphone sensitivity level.
Select a microphone gain level from the following:
LEVEL 1 (Lowest sensitivity) to LEVEL 9 (Highest sensitivity)
Remark
Default: LEVEL 5
9 Press M twice.
The selected microphone gain level is set.
䎶䎨䎷䎝䎃䎃䎕䎃 䎷䎻 䎒 䎵䎻
䎃䎃䎃䎃䎃䎃䎃䎃䎖䎃 䎰䎨䎰䎲䎵䎼
䎃䎃䎃䎃䎃䎃䎃䎃䎗䎃 䎶 䎬 䎪䎱䎤䎯 䎬 䎱䎪
䎃䎃䎃䎃䎃䎃䎃䎃䎘䎃 䎶䎦䎤䎱
䎖䎃 䎤 䎸 䎧 䎬 䎲
䎔䎃 䎰䎲䎧䎨
䎃 䎕䎃 䎧 䎬 䎪 䎬 䎷䎤 䎯
䎔䎃 䎰 䎬 䎦䎃䎃䎪 䎤 䎬 䎱
䎕䎃 䎰䎸䎷䎨
䎃 䎖䎃 䎵 䎻䎃 䎤 䎩䎃 䎧䎸䎤䎯
䎃 䎗䎃䎃䎹䎲䎯䎃 䎰䎲䎧䎨
Functions Used As Needed
䎃 䎔䎃 䎰 䎬 䎦䎃 䎪 䎤 䎬 䎱
䎃 䎃䎃䎃䎃䎃䎯 䎨 䎹 䎨 䎯䎃 䎘
115
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
10 Press p to exit the Set mode.
Tips
• Increasing the microphone gain excessively can distort the sound or pick up the surrounding noise,
impairing intelligibility.
• Be sure to adjust the microphone gain whenever you change microphones.
Muting Voice
In the dual reception mode, the audio being received on the non-operating band is muted
when a signal is herd on the operating band.
For more details, see “Muting Audio” on page 35.
Simultaneously radio broadcast reception
Set the mute time of the simultaneous broadcast reception.
For more details, see “AF-DUAL Function” for simultaneously monitoring the amateur
frequency while listening to the broadcast radio.
Changing the sound volume setting method
You can set the sound volume adjustment mode to be automatically canceled after about
3 seconds, after pressing v and then adjusting the sound volume with O.
Enter the Set mode:
Functions Used As Needed
Press and hold M for over 1 second.
Turn O to select [2 TX/RX].
Press H.
Turn O to select [3 AUDIO].
Press H.
Turn O to select [4 VOL MODE].
Press H.
Turn O to select [AUTO BACK].
Remark
Default: NORMAL
Tip 		Usually adjust the sound volume by turning O while pressing
v. If the [AUTO BACK] is selected, the sound volume
adjustment mode will be automatically canceled after you have
pressed v to enter the sound volume adjustment mode and
return to the frequency display screen.
9 Press p to exit the Set mode.
116
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Setting memory bank link
You can link multiple registered memory banks, and also recall a frequently used memory
bank immediately
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [3 MEMORY].
Press H.
Turn O to select [1 BANK LINK].
Press H.
Turn O to select a memory bank to link.
Press B.
The cursor moves to the position (such as BANK1) to set
link.
Turn O to select [ON].
Remark
Default: OFF
9 Press B.
10 Also set link to other memory banks.
Set link to each memory bank from memory bank 1 through
memory bank 24 by repeating step 6 to 9.
11 Press H.
The memory bank link is set.
12 Press p.
Exits from the Set mode.
Assigning a name to a memory bank
Assigning a name to a memory channel
Memory channels and home channels may be assigned a name (memory tag) such as a
callsign or broadcast station name.
For more details, see “Using Memory Tag” on page 46.
Functions Used As Needed
A memory bank can be assigned a name with up to 16 characters.
For more details, see “Assigning Name to Memory Bank” on page 49.
117
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Prohibiting registration to memory channel
Memory Channel Protect Function
A memory channel may be protected so that a new frequency or memory channel tag
name cannot be registered to it.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [3 MEMORY].
Press H.
Turn O to select [4 MEMORY PROTECT].
Press H.
Turn O to select [ON].
Any registration to the memory channel is prohibited.
Remark
Default: OFF
7 Press p to save the memory channel protect, and exit the
Set mode.
Setting memory skip function
Set the scan method for scanning memory channels.
For more details, see “Specifying a Skip/Selected Memory Channel” on page 60.
Registering to a memory channel with the lowest memory channel
number
Memory Channel Write Function
When registering to a memory channel. you can display an unregistered memory channel
with the lowest memory channel number.
Functions Used As Needed
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [3 MEMORY].
Press H.
Turn O to select [6 MEMORY WRITE].
Press H.
Turn O to select [LOWER].
A memory channel with the lowest memory channel number
appears on the LCD.
Remark
Default: NEXT
7 Press p to set the memory channel registration to the
lowest unregistered memory channel number, and exit from
the Set mode.
118
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Notifying a call from a remote station by the bell
Notifies you of a call from a remote station by the bell.
See “Notification of a Call from a Remote Station by the Bell” on page 89.
Selecting a DCS code
Select the DCS code from 104 codes from 023 to 754.
For more details, see “Setting a DCS Code” on page 86.
Transmit and receive a DCS Code with a inverted phase
DCS INVERSION Function
You can transmit and receive a DCS code with an inverted phase when using the digital
code squelch function.
Enter the Set mode:
Remark
䎶䎨䎷䎝䎃䎃䎗䎃 䎶 䎬 䎪 䎱䎤䎯 䎬 䎱䎪
䎃䎃䎃䎃䎃䎃䎃䎃䎘䎃 䎶䎦 䎤 䎱
䎃䎃䎃䎃䎃䎃䫹䎙䎃 䎪䎰
䎃䎃䎃䎃䎃䎃䎃䎃䎚䎃 䎺 䎬 䎵 䎨䎶 䙵䎻
䎖䎃䎃 䎧 䎦 䎶䎃䎃 䎬 䎱 䎹䎨䎵 䎶 䎬 䎲䎱
䎗䎃䎃 䎧䎷 䎰䎩䎃䎃䎰䎲䎧䎨
䎘䫹 䎧䎷 䎰䎩䎃䎃䎶 䎨 䎯䎨䎦䎷
䎙䫹 䎳䎤䎪䎨䎵
䎃 䎖䎃 䎧 䎦 䎶䎃䎃 䎬 䎱 䎹䎨䎵 䎶 䎬 䎲䎱
䎃䎃䎃䎃䎃䎃 䎵䎻 䙵 䎱䎲䎵䎰䎤䎯
䎃䎃䎃䎃䎃䎃䎃䎷䎻 䙵 䎱䎲䎵䎰䎤䎯
Default: Reception [Homeomorphic], Transmission [Homeomorphic]
7 Press p.
The phase of DCS code is set, and exits from the Set mode.
Functions Used As Needed
Press and hold M for over 1 second.
Turn O to select [4 SIGNALING].
Press H.
Turn O to select [3 DCS INVERSION].
Press H.
Turn O to select a phase.
When a phase is selected for the reception side, the phase
for transmission side is automatically determined.
Reception: [Homeomorphic], [Both Phase],
[Inverted Phase], [Homeomorphic],
[Both Phase], [Inverted Phase]
Transmission: [Homeomorphic], [Inverted Phase],
[Inverted Phase], [Inverted Phase],
[Homeomorphic], [Homeomorphic]
119
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Setting the transmission method of the DTMF code
Set the transmission method of the registered DTMF code.
For more details, see “Sending the Registered DTMF Code” on page 80.
Setting DTMF code
The maximum of 16 digit DTMF code can be registered for a telephone number to make
a call through the public telephone line from a phone patch.
For more details, see “Using DTMF Function” on page 79.
Calling only a specific station
New Pager Function
When using transceivers with your friends, specifying personal codes allows only a
specific station to be called.
For more details, see “Calling Only a Specific Station New Pager Function” on page 90.
Enabling no-communication squelch function
PR FREQUENCY Function
You can set a no-communication squelch frequency in steps of 100 Hz within the range
from 300 Hz to 3000 Hz.
Enter the Set mode:
Functions Used As Needed
Press and hold M for over 1 second.
Turn O to select [4 SIGNALING].
Press H.
Turn O to select [7 PR FREQUENCY].
Press H.
Turn O to tune in to a frequency.
Select no-communication squelch frequency in steps of 100
Hz.
Remark
Default: 1600 Hz
7 Press p to set the no-communication squelch function,
120
and exit the Set mode.
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Adjusting the squelch level
SQL LEVEL Function
You can set squelch level to mute the raspy noise heard.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [4 SIGNALING].
Press H.
Turn O to select [8 SQL LEVEL].
Press H.
Turn O to select a squelch level.
Select from among LEVEL 0 to LEVEL 15.
The higher the squelch level, the greater the noise reduction.
Remark
䎶䎨䎷䎝䎃䎃䎗䎃 䎶 䎬 䎪 䎱䎤䎯 䎬 䎱䎪
䎃䎃䎃䎃䎃䎃䎃䎃䎘䎃 䎶䎦 䎤 䎱
䎃䎃䎃䎃䎃䎃䫹䎙䎃 䎪䎰
䎃䎃䎃䎃䎃䎃䎃䎃䎚䎃 䎺 䎬 䎵 䎨䎶 䙵䎻
䎛䎃
䎜䎃
䎔䎓䎃
䎔䎔䎃
䎶䎴䎯䎃䎃䎯䎨 䎹 䎨 䎯
䎶䎴䎯䎃 䎶䙵䎰䎨䎷䎨䎵
䎶䎴䎯䎃䎃䎨䎻䎳䎤䎱䎷 䎬 䎲䎱
䎶䎴䎯䎃䎃䎷䎼䎳䎨
Default: LEVEL 1
7 Press p to save the selected squelch type, and exit the Set
mode.
䎃 䎛䎃 䎶䎴䎯䎃䎃䎯䎨 䎹 䎨 䎯
䎃 䎃䎃䎃 䎯 䎨䎹 䎨 䎯䎃 䎔
䎃
Setting the signal strength to output sound
S Meter Squelch Function
Remark
Default: OFF
8 Press p to save the selected S-Meter level, and exit the
Set mode.
Functions Used As Needed
You can set A-Band and B-Band individually to output the sound only when receiving a
signal stronger than signal strength level set to the S-Meter Level.
1 Select a band as an operating band.
2 Press and hold M for over 1 second to enter the Set
mode.
3 Turn O to select [4 SIGNALING].
4 Press H.
5 Turn O to select [9 SQL S-METER].
6 Press H.
7 Turn O to select a setting value.
Select a S-Meter level with reference to the table shown
below.
121
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Display
S-Meter Display
OFF
No display
Operating Status
S-Meter
squelch
function
is
(By default, S-Meter squelch function is set to OFF.)
OFF.
Level 1
Outputs the sound of signal stronger than the S-Meter level 1.
Level 2
Outputs the sound of signal stronger than the S-Meter level 2.
Level 3
Outputs the sound of signal stronger than the S-Meter level 3.
Level 4
Outputs the sound of signal stronger than the S-Meter level 4.
Level 5
Outputs the sound of signal stronger than the S-Meter level 5.
Level 6
Outputs the sound of signal stronger than the S-Meter level 6.
Level 7
Outputs the sound of signal stronger than the S-Meter level 7.
Level 8
Outputs the sound of signal stronger than the S-Meter level 8.
Level 9
Outputs the sound of signal stronger than the S-Meter level 9.
Setting the squelch type for transmission and reception
SQL EXPANTION FUNCTION
Squelch types set beforehand can function separately for transmission and reception.
Enter the Set mode:
Functions Used As Needed
Press and hold M for over 1 second.
Turn O to select [4 SIGNALING].
Press H.
Turn O to select [10 SQL EXPANTION].
Press H.
Turn O to select [ON].
ON: Use separate squelch for transmission and reception.
OFF: Use the same squelch for transmission and reception.
Remark
Default: OFF
7 Press p to save the separate squelch setting, and exit the
Set mode.
122
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
Setting the type of tone squelch
Set the tone squelch to open the squelch only when a signal containing the specified
frequency tone is received.
For more details, see “Using the Tone Squelch Function” on page 84.
Selecting a tone frequency
Select the tone frequency from 50 types between 67.0 MHz and 254.1 MHz.
For more details, see “Setting a Tone Frequency” on page 85.
Setting the sound and speed during tone search
Tone Search Function
Sound can be muted during tone search. The operation speed of the tone search can
also be changed.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [4 SIGNALING].
Press H.
Turn O to select [13 TONE-SRCH].
Press H twice.
Turn O to select MUTE to [ON].
Remark
Default: ON
7 Press M.
8 Turn O to select [SPPED].
9 Press H.
10 Turn O to select SPEED to [Rapid].
Remark
Default: FAST
䎶䎨䎷䎝䎃䎃䎗䎃 䎶 䎬 䎪 䎱䎤䎯 䎬 䎱䎪
䎃䎃䎃䎃䎃䎃䎃䎃䎘䎃 䎶䎦 䎤 䎱
䎃䎃䎃䎃䎃䎃䫹䎙䎃 䎪䎰
䎃䎃䎃䎃䎃䎃䎃䎃䎚䎃 䎺 䎬 䎵 䎨䎶 䙵䎻
䎔䎖䎃 䎷䎲䎱䎨䙵䎶䎵䎦䎫
䎃 䎔䎃䎃 䎥 䎨 䎯䎯
䎃 䎕䎃䎃䎧䎦䎶䎃䎃䎦䎲䎧䎨
䎃 䎖䫹 䎧䎦䎶䎃䎃䎬 䎱 䎹 䎨 䎵䎶 䎬 䎲䎱
䎔䎖䎃 䎷䎲䎱䎨䙵䎶䎵䎦䎫
䎃䎃䎃 䎰䎸䎷䎨䎃 䎃䎃 䎝䎃䎃 䎲䎱
䎃䎃䎃 䎶䎳䎨䎨䎧䎃䎃䎃䎝䎃䎃 䎩䎤䎶䎷
mode.
䎔䎖䎃 䎷䎲䎱䎨䙵䎶䎵䎦䎫
䎃䎃䎃 䎰䎸䎷䎨䎃 䎃䎃 䎝䎃䎃 䎲䎱
䎃䎃䎃 䎶䎳䎨䎨䎧䎃䎃䎃䎝䎃䎃 䎩䎤䎶䎷
Functions Used As Needed
11 Press p to save the Tone Search setting and exit the Set
123
Application for FCC / IC
FCC ID: K6620445X20
IC: 511B-20445X20
Set Mode
ON/OFF for the Weather Alert Feature
Setting the Weather Alert Feature, used for notifying storms and hurricanes, ON or OFF.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [4 SIGNALING].
Press H.
Turn O to select [14 WX ALERT].
Press H.
Turn O to select [ON].
ON: Enables the Weather Alert Feature.
OFF: Disables the Weather Alert Feature.
Remark
Default: OFF
7 Press p to save the Weather Alert ON or OFF setting, and exit the Set mode
Setting the surveillance interval time for priority channels
DW TIME Function
When the dual reception function is active, the interval for monitoring the signal of the
priority channel can be set.
Enter the Set mode:
Press and hold M for over 1 second.
Turn O to select [5 SCAN].
Press H.
Turn O to select [1 DW TIME].
Press H.
Turn O to select the monitoring interval.
Interval can be selected from 0.1 SEC to 10 SEC.
Functions Used As Needed
Remark
Default: 5 seconds
7 Press p to save the priority memory channel monitoring
124
interval setting and exit the Set mode.
䎶䎨䎷䎝䎃䎃䎘䎃 䎶䎦 䎤 䎱
䎃䎃䎃䎃䎃䎃䎃䎃䎙䎃 䎪䎰
䎃䎃䎃䎃䎃䎃䫹䎚䎃 䎺 䎬 䎵 䎨䎶 䙵䎻
䎃䎃䎃䎃䎃䎃䎃䎃䎛䎃 䎦䎲䎱 䎩 䎬 䎪
䎔䎃
䎕䎃
䎃䎖䎃
䎃 䎗䎃
䎧䎺䎃䎃䎷 䎬 䎰䎨
䎶䎦䎤䎱䎃䎃䎯 䎤䎰䎳
䎶䎦䎤䎱䎃䎃䎵 䎨 䙵 䎶䎷 䎤䎵䎷
䎶䎦䎤䎱䎃䎃䎵 䎨䎶䎸䎰䎨
䎔䎃 䎧䎺䎃䎃䎷 䎬 䎰䎨
䎃 䎃䎃䎃 䎃 䎘 䎑 䎓 䏖䏈䏆
䎃

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2015:09:29 08:57:25+09:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2015:09:29 08:57:36+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:09:29 08:57:36+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Document ID                     : uuid:82812204-c7e7-450f-9bbd-db6e31191066
Instance ID                     : uuid:2e163129-b563-470f-9569-9cad58d237dd
Producer                        : Adobe PDF Library 10.0.1
Page Count                      : 25

EXIF Metadata provided by EXIF.tools