Yaesu Musen VR-5000 User Manual Revised Manual Pages

Yaesu Musen Co., Ltd. Revised Manual Pages

Contents

Revised Manual Pages

Download: Yaesu Musen VR-5000 User Manual Revised Manual Pages
Mirror Download [FCC.gov]Yaesu Musen VR-5000 User Manual Revised Manual Pages
Document ID116739
Application ID/uvIXLGEha/DZ8fY+4NOdw==
Document DescriptionRevised Manual Pages
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6.2kB (77520 bits)
Date Submitted2000-09-12 00:00:00
Date Available2000-09-26 00:00:00
Creation Date2000-09-12 14:44:44
Producing SoftwareAcrobat PDFWriter 4.05 for Windows NT
Document Lastmod2000-09-12 14:45:20
Document TitleRevised Manual Pages
Document CreatorAdobe Acrobat PDF Link - 32
Document Author: Celia

- YAE SU
Rldb Communwmkmt
VAESU MUSE" OD“ LTD.
4-8-8 Nakumeguvo, Magma-kn, Tokyu 153-8644, Japan
Tel : B1»(0)3-5725-6122 ~ Fax: B1-(0)3-5725~6205
The following statement will be placed in a prominent place in
the text of the Manual.
NOTE:
INFORMATION TO THE USER:
This equipment has been tested and found to comply
with the limits for a Class A Digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial
»environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
User will be required to correct the interference at
his own expense.
September 11, 2000
Vii-5000
Operating Manual
Rear Panel Connections
(1) DC 13.5V Jock
This is the DC power supply connection for the VR-50004 Connect the Supplied PAP
4A AC adapter to this jack.
(2) MUTE Jock
If using the VR75000 with a transceiver, shorting this jack during transmit will
mute receiver output and attenuate RF signal input Check with information
provided with your particular transceiver for proper connection.
(3) ANT 3 Terminal
Use these spring-loaded tenninal connectors to connect a high-impedance antenna.
(4) ANT Switch
This switch selects antenna connected from either the ANT A Jack or ANT 8
terminal,
(5) ANTAJat-k
Connect the 50 Q coaxial feed line to your low»impedance antenna here using a
type-M (PL-259) connector,
(6) EXT SP Jack
This 27contact mlnl phone jack provides receiver audio for an external loudspeaker
with an impedance of 4 - 16 Q. Inserting a plug in this jack disables the
loudspeaker.
(7) REC Jack
This jack provides a constant level (Tl? mV @ ? 9) audio output, which is unaffected
by the VOL and TONE controls This audio can be used [or recording purposes. and
for connection to data demodulator/decoder equipment.
(8) WV Jack
This output jack provides BV DC at up to ?’?? mA for low power accessories The
center Contact is positive,
(9) IF OUT Jack
This outputjack provides low~level (Oil Vrms (-6 dBm) @ 50 n) 10.7 MHz IF output.
.(10) CAT Jack
This 913i" serial DB~9 jack allows external computer control of the VR-5000.
Connect a serial cable here and to the RSVZ32C COM port on your personal
computer.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : Adobe Acrobat PDF Link - 32
Create Date                     : 2000:09:12 14:44:44
Author                          : Celia
Producer                        : Acrobat PDFWriter 4.05 for Windows NT
Modify Date                     : 2000:09:12 14:45:20-07:00
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: K66VR-5000

Navigation menu