Yale 1900 Series Door Closer Look Viewer Manual For Print

User Manual: Yale 1900 Series Door Closer Catalog

Open the PDF directly: View PDF .
Page Count: 24

Download
Open PDF In Browser	View PDF

1900 Series

Traditional Door Control

An ASSA ABLOY Group brand

1900 series

door closer

the engineer's choice
The Yale® 1900 Series Traditional Surface Closer offers conventional
closer styling in combination with contemporary closer control and the
installation convenience of a one-size closer shell. Only two spring sizes
are required to provide control for the complete range of door sizes. The
1900 Series Door Closers are designed for traditional and period decor
while at the same time meeting the strict requirements of engineers
worldwide.
The Yale® 1900 Series Traditional Closers are available for standard arm,
parallel arm or corner bracket installation. Rigid heavy-duty arms are
available for Parallel Rigid and UNI Stop™ Parallel arm installations. Each
type of installation is available with non-hold open or hold open arms. A
variety of accessories is available to meet most installation requirements.

contents
Introduction . . . . . . . . . . . . . . . . . . . 2
Overview . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . 4
Applications . . . . . . . . . . . . . . . . . . 5-6
Technical Details . . . . . . . . . . . . . 7-10
Accessories . . . . . . . . . . . . . . . . 11-16
Parts List . . . . . . . . . . . . . . . . . . 17-21
How To Order . . . . . . . . . . . . . . . . . 22

finishes

Product will be painted with a combination of waterborne acrylic and polyester powder coat. Closers will withstand
100 hours of salt spray. (The ANSI requirement is 25 hours.)

Sprayed Finishes
Description

Specify Designation
(ANSI/BHMA)

Complements the following finishes

Old Designation

Aluminum

689

625, 628, 629, 630, 651, 652

Statuary Bronze

690

613, 640, 695

STAT

Dull Bronze

691

612, 637, 639

Black

693

315

Medium Amber

694

312

Gold

696

605, 606, 632, 633

Prime Coat*

600

—

SRI

*600 is a special rust-inhibiting prime coat. Closers can be ordered prime coat only (specify closer x 600). An additional charge
applies if finish coat is required over prime coat (ex: 1902/4 x 600 x 690).

Page Revised Electronically 2/14

1900 series

door closer

overview

Size Designation
Spring Power
Adjustment

2/4 = Sizes 2 thru 4
5/6 = 5 & 6

Aluminum Alloy Shell

Regulating Valve

compliance standards

All 1900 Series closers comply with ANSI/BHMA A156.4 Grade 3 Specifications.
All Yale® series 1900 closers
with non-hold open arms are listed by Underwriters Laboratories for labeled fire doors. This includes compliance to
UL10C and for 3-hour assemblies. The product is manufactured in an ISO 9001 facility.

specifications

Closer for interior (and) exterior doors shall be rack-and-pinion type enclosed in a cast aluminum alloy shell. Closer
spring shall be clock-type coil spring and shall be adjustable through a range of closing power. Closer fluid shall
maintain lubricity and contain anti-oxidation agents. Closer shall be equipped with a single hex-key operated
regulating valve for control of both closing and latch speeds. Closer shall have adjustable backcheck. Closer shall
be Yale® 1900 Series Traditional Surface Closer or equivalent.

1900 series

door closer

features
One-Size Aluminum Housing
Closer is housed in special aluminum
alloy shell selected for its ability to
provide optimum performance. One
body size provides simplified templating
and installation.
Adjustable Spring Power
Clock-type coil spring allows incremental
adjustment of closer power to meet
individual installation needs. Permits
a fine adjustment of the closer to the
environment.
Rack and Pinion Design
Provides a smooth constant control of
the door through its full opening and
closing cycle.
Adjustable Closing Speed/Latch
Speed
A dual-purpose regulating valve, hex-key
operated, permits independent adjustment
of both sweep and latch speed.

Adjustable Backcheck Cushioning
An independent regulating valve, hexkey-operated, provides an adjustable
hydraulic cushion to the door opening
speed toward the end of the opening
cycle. This feature is standard with all
but delayed action closers. Backcheck is
not available with delayed action closers.
Non-Hold Open Arms
Standard closer will be supplied with a
non-hold open arm. This arm is nonhanded.
Adjustable Power Standard
Installation Jamb Bracket
Provides a ±7-1/2% power adjustment
by relocation of the forearm pin in the
jamb bracket. Supplied standard with all
standard installation and corner bracket
installation non-hold open closers.

Hold Open Arms
Closer arm has adjustable hold open
feature (90° to 180°). This arm is nonhanded for regular arm application only.
It is handed for all friction hold open
parallel arm installations.
Field Reversible
Closer spring can be reversed to
accommodate the hand of the door. It
is recommended that wherever possible
the closer be ordered handed. Parallel
hold open arms and delayed action
closers are not reversible.
Adjustable Delayed Action Closing
Closer’s initial closing speed at the
beginning of the closing cycle (from full
open down to approximately 70°) is
adjustable, allowing slow-moving traffic
to pass through the opening before the
closer begins its normal closing speed.
For regular arm non-hold open closers
only. Delayed action closers are not
available with backcheck cushioning.
Delayed action closers are handed.

optional features
Adjustable Delayed Action Closing*
(Supplied in lieu of backcheck feature) An optional
hydraulic feature that adds a third speed range to the
closing cycle. This feature becomes effective when
the door is opened and released at any point beyond
70°. The amount of time delay depends upon the
combination of the angle of door release and valve
adjustment. The valve can be adjusted with a 1/8"
(3mm) hex key from no delay time up to maximum
delay times of:
Door Opened and
Released at

Approximate Time
of Delay Cycle

180°

4-5 minutes

120°

2-3 minutes

90°

25-30 seconds

*Note: Regular arm (NHO units only) are
handed - not reversible

Suggested Applications
Delayed action closing allows slowmoving traffic to clear the opening
before the door closer’s normal closing
cycle begins. This feature can be
helpful in health care facilities such as
hospitals and nursing homes. It provides
sufficient time for persons on crutches
or in wheelchairs to pass through a
door without concern of it closing. At
the same time, it can accommodate

the facility's staff with movement of food
service carts, beds, and other wheeled
traffic. Use of delayed action closers on
many doors throughout industrial and
commercial buildings can also assist the
flow of traffic. Locations where additional
time to clear the opening is advantageous
are doors between office and factory/
warehouse facilities, doors to workshops
or laboratories, to kitchen and food
processing areas, etc.

1900 series

door closer

applications

Regular Arm

Parallel Arm

This is the only pull-side application where a double
lever arm is used. It is the most power-efficient
application for a door closer. Sufficient frame, door
and/or ceiling clearance must be considered. Since
the arm assembly projects directly out from the
frame, this application may present an aesthetics
issue or be prone to vandalism.

This application provides the most appealing
design appearance for a surface-mounted door
closer having a double lever arm. This also makes
it beneficial in vandalism-prone areas. It is on the
push side of the door and the arm assembly extends
almost parallel to the door. In the closed position,
there is very little or no hardware projecting beyond
the frame face in most situations.
Due to the geometry of the arm it is approximately
25% less power-efficient than a regular arm
application.
The entire closer and arm assembly are mounted
below the frame stop, requiring a top rail of 5-3/8"
(137mm) to mount the body. Clearance to the
bottom of the closer body from the top of the door
is 7-3/8" (187mm). (Based on a 5/8" (16mm) high
frame stop.)

1900 series

door closer

applications

Parallel Rigid Arm
An enhanced variation of the standard parallel
arm assembly that is intended for use in heavy
traffic areas where auxiliary door stops are
installed. Hold open available - specify hand
when ordering.

Uni Stop™ Arm (Parallel Arm applications only)
Uni Stop™ arms combine the features of a doublelever arm overhead door stop/holder with the
backcheck feature of the door closer to reduce door
stopping shock loads to a minimum. The UNI Stop
arm uses a compression spring buffer at the soffit
plate/arm shoe that will absorb 30 lbs. of force, 5°
prior to the door’s dead stop. Coupled with the door
closer’s backcheck feature, this arm provides the
most controlled stop available with a surface door
closer.
There are three different length arm assemblies. Each
length is designed for a specific range of door widths
to provide precise door control. This further lessens
the dead stop impact on the door’s hinges/pivots.

1900 series

door closer

regular arm installation

* Template position for 100° door opening
Body mounting holes are spaced 4-1/8" (105mm) horizontally and 1-3/8" (76mm) vertically.

Maximum Door Size
Wood or Metal
Inches (cm)

E
Minimum
Ceiling Clearance
Inches (mm)

Model Number

Interior

Exterior

Non-Hold
Open

Hold
Open

48"
(122)

36"
(91)

1902/4

1912/4

—

44"
(112)

1905/6

Non-Hold
Open

Hold Open

1-1/2"
(38)

2-1/8"
(54)

1915/6

All dimensions are for reference only. Dimensions are given in inches (mm) unless otherwise noted. Door sizing information is
based on installation on standard weight doors, 7'0" (2.13m) high x 1-3/4" (44mm) thick, hung on anti-friction hinges and operating
under normal conditions.

1900 series

door closer

parallel arm installation

* Template position for 130° door opening
Body mounting holes are spaced 4-1/8" (105mm) horizontally and 1-3/8" (76mm) vertically.

Maximum Door Size
Wood or Metal
Inches (cm)

B
Minimum
Top Rail with 5/8" (16mm) frame stop
Inches (mm)

Model Number

Interior

Exterior

Non-Hold
Open

Hold
Open

42"
(107)

36"
(91)

PA1902/4

PA1912/4

—

44"
(112)

PA1905/6

Without Drop Plate

With 1988
Drop Plate

5-3/8"
(137)

2-1/2"
(64)

PA1915/6

1900 series

door closer

parallel rigid arm

* Template position for 130° door opening
Body mounting holes are spaced 4-1/8" (105mm) horizontally and 1-3/8" (76mm) vertically.

Maximum Door Size
Wood or Metal
Inches (cm)

B
Minimum Top Rail with 5/8" (16mm)
frame stop

Model Number

Interior

Exterior

Non-Hold Open

Hold
Open

48"
(122)

36"
(91)

PR1902/4

PR1912/4

—

44"
(112)

PR1905/6

Without
Drop Plate

With 1988
Drop Plate

5-3/8"
(137)

2-1/2"
(64)

PR1915/6

1900 series

door closer

uni stop™ arm

Body mounting holes are spaced 4-1/8" (105mm) horizontally and 1-3/8" (76mm) vertically.

Door Width
Inches
(cm)

B
Minimum Top Rail
5/8" (16mm) Frame Stop
Without
Drop Plate

With 1988
Drop Plate

28-32"
(71-81)
33-41"
(84-104)

5-5/8"
(143)

42-48"
(107-122)

2-3/4"
(70)

C
Template Position for Hold Open at Listed Angle or Dead Stop at
Listed Angle plus 5˚

D
Arm
Extension
Beyond
Closer

85°

90°

95°

100°

105°

110°

10"
(254)

9-3/8"
(238)

8-3/4"
(222)

8-1/4"
(210)

7-3/4"
(197)

7-1/2"
(191)

8-7/8"
(225)

12-1/4"
(311)

11-5/8"
(295)

11"
(279)

10-1/2"
(267)

10"
(254)

9-5/8"
(244)

10-3/8"
(264)

14-5/8"
(371)

13-7/8"
(352)

13"
(330)

12-1/2"
(318)

12"
(305)

11-1/2"
(292)

11-7/8"
(302)

Maximum Door Size
Inches (cm)

Model Number

Interior

Exterior

Non-Hold
Open

Hold
Open

28-41”
(71-104)

28-36”
(71-91)

UNI1902/4

UNI1912/4

42-48”
(107-122)

37-48”
(94-122)

UNI1905/6

UNI1915/6

x Specify Door
Width

All dimensions are for reference only. Dimensions are given in inches (mm) unless otherwise noted. Door sizing information
is based on installation on standard weight doors, 7'0" (2.13m) high x 1-3/4" (44mm) thick, hung on anti-friction hinges and
operating under normal conditions.

1900 series

door closer

regular arm
brackets for non-hold open arms

Molded/Bull Nose Trim - #291 Bracket:
For use where the door frame has molded
or bull nose trim which will not accept a
standard non-hold open shoe. The bracket
is mortised into the frame rabbet and
projects beyond the face of the frame. It will
accommodate a frame rabbet up to 2" (51
mm) deep.

Molded/Bull Nose Trim - #291A Bracket:
This bracket is similar to - but longer than - the
291 bracket. It is designed to accommodate frame
rabbets from 2" to 2-7/8" (51 to 73mm) deep.

bracket for hold open arms

Molded/Bull Nose Trim - #292
Bracket: For use where the door
frame has molded or bull nose trim
which will not accept a standard hold
open shoe. It is mortised into the frame
rabbet, and projects beyond the face
of the frame. It will accommodate a
rabbet up to 2" (51mm) deep. This
bracket is used in combination with the
standard hold open mounting shoe.

1900 series

door closer

parallel arm
brackets for non-hold open arms

Standard Installation - #289 Soffit Plate:
This soffit plate is supplied standard with parallel arm
closers. It can be mounted where the frame soffit is as
narrow as 1" (25mm).

Narrow Frame/Removable Stop - #297 Soffit Plate: For
use where a narrow frame or frame with removable stop
does not permit use of the standard soffit plate. This plate
may be mounted on the frame soffit or the frame rabbet
where the stop does not exceed 5/8" (16mm) in height. All
of the screw holes are in a straight line, requiring as little
as 1-1/4" (32mm) of frame reveal to mount bracket and
maintain good closer arm geometry. Where the frame soffit
is as wide as 2" (51mm), this soffit plate may be used to
clear weatherstripping that is up to 1-3/8" (35mm) wide and
5/8" (16mm) in height.

Flush Transom - 589L Angle Bracket: For use where
rabbeted or flush transom conditions prevent installation of
a soffit plate. Used in combination with the 289 soffit plate,
or it may be used in combination with the 290 soffit plate
when it is necessary for the closer arm to clear a separate
overhead door holder.

Mounting Between Doors - #413A Soffit Bracket: For
use where insufficient space between companion doors does
not permit use of other soffit plates. This bracket permits
mounting of the closer between doors with as little as 4-1/8"
(105mm) of header space. Permits closer arm to clear up to a
5/8" (16mm) high stop.

Blade/Applied Stop - #299 Soffit Plate: For use where
a blade or applied stop does not permit installation of the
standard soffit plate. Mounts to either the frame soffit or
rabbet. Since this soffit plate projects 7/8" (22mm) less than a
standard soffit plate, it requires a minimum frame reveal of 2"
(51mm). Permits closer arm to clear up to a 5/8" (16mm) high
stop.

Extra-Clearance - #290 Offset Soffit Plate: For use where
the need for additional clearance prevents use of the standard
soffit plate. This plate mounts to the frame soffit to provide up
to 2" (51mm) of clearance when a separate overhead door
holder is used. Standard mounting requires a 2-5/8" (67mm)
wide frame soffit. It may also be used where unusually high
frame stops or weatherstripping prevents the use of other
soffit plates.

1900 series

door closer

parallel rigid arm
brackets for non-hold open and hold open arms

Flush Transom - #293L Angle Bracket: For
use where flush transom conditions prevent
installation of the standard hold open soffit plate.
Used for parallel hold open arms.

Standard - #293S Spacer Block: For use where
a narrow frame soffit does not provide adequate
support for the soffit plate. Supplied as standard
with all rigid parallel arm closers.

1-1/2
(38)
1-1/2
(38)

Clearance/Support Blade Stop - #891
Spacer Block: For use where the frame has
a blade stop and the soffit plate must be
mounted on the frame rabbet. This accessory
is used in combination with the standard
Spacer Block to provide clearance of the
blade stop.

Narrow Frame - #890 Support Bracket: For
use where the frame is narrow, and the soffit plate
cannot be mounted directly to the frame soffit or
rabbet. Used in combination with the #891 Spacer
Block on blade stop frames to provide extra
support and needed clearance of the blade stop.

closer mounting plates

Narrow Top Rail - #1988 Drop Plate: For use
where a narrow top rail prevents the closer from
being mounted directly to the door surface.

1900 series

door closer

uni stop™ arm
brackets

Flush Transom - 589L Angle Bracket: For
use where rabbeted or flush transom conditions
prevent installation of a soffit plate. Used in
combination with the 289 soffit plate, or it may
be used in combination with the 290 soffit plate
when it is necessary for the closer arm to clear a
separate overhead door holder.

Additional Support - #6190 Reinforcing Bracket:
Standard for use with all parallel arm Uni Stop door
controls. Provides additional support to the soffit
plate on installations with door frame reveals from
1-7/8" to 4-5/8" (48 to 117mm).

Wide Frame - #6191 Reinforcing Kit: Optional for use with all parallel
arm Uni Stop door controls. Used to support the soffit plate on installations
with wide frames. Clamps may be used with or without the spacer block,
depending on frame conditions.

closer mounting plates

Narrow Top Rail - #1988 Drop Plate: For use
where a narrow top rail prevents the closer from
being mounted directly to the door surface.

1900 series

door closer

corner brackets
The following frame-mounted brackets, 1950, 2950 and 964, require the use of a door closer of the opposite hand
from the hand of the door. Use the Parallel Arm Sizing Chart to select the correct size of closer to use, when the
closer is to be mounted on a corner bracket.

5/8
(16) Ref.

8
(203)

7
(178)

9-3/8
(238)

Corner Mounting, Standard Drop - #1950 Corner
Bracket: For use where door is required to open to
180°. Minimum soffit width 1-3/8" (35mm).

Corner Mounting, Extra Drop - #2950 Corner
Bracket: For use with a separate overhead door
holder. Drops closer 1" (25mm) lower than #1950
Standard Drop Corner Bracket to permit mounting
of an overhead holder. Permits door openings to
180°. Minimum soffit width 1-3/8" (35mm).

6-1/2
(165)
15
(381)

Arched or Circular Top Door - #964 Adjustable
Bracket: For opposite hinge side application on
arched or circular top doors. This frame-mounted
bracket can be adjusted to accommodate virtually
any radius of frame. Minimum soffit width 2-1/2"
(64mm). This bracket requires the use of a door
closer of the opposite hand from that of the door.

Arched or Circular Top Door - #974 Offset
Adjustable Bracket: For hinge side application on
arched or circular top doors. This door-mounted
bracket is adjustable to accommodate virtually any
radius of frame. Base diameter 3-5/8" (92mm).

1900 series

door closer

adapter plates

Dimensions

Size Closer
Being
Replaced

Adapter Plate
Catalog
Number

992/993

1983

5-1/2”
(140)

2-5/8”
(67)

994

None
Required

—

995/996

1986

5-1/2”
(140)

2-5/8”
(67)

1980 Series Adapter Plate
For use when replacing a discontinued old style 990
Series surface closer with a series 1900 Traditional
Surface Closer. The plate selected will employ the
existing holes in either door or corner bracket. The
Series 1900 closer will mount to the plate. These plates
can be used to convert regular arm, parallel arm or
bracket mount installations. Order by model number.

1900 series

door closer

parts list
regular arm

Rod & Shoe
1900-11

Non-Hold Open

Main Arm

Holder Shoe & Loop
1900-13
Jackscrew
1543R
Locknut
455
Friction Disc
1554
(not visible)

Hold Open
Main Arm

Note: Mounting hardware included with all parts ordered
Arm Function

Complete Arm Assembly

Non-Hold Open

Y1900-1

Main Arm

Main Arm
Less Rod & Shoe

Main Arm & Rod Less
Holder Shoe & Loop Assy.

Y1900-1W

N/A

1900-3W

1900-1M
Hold Open

1900-3

1900 series

door closer

parts list
parallel arm
Rod & Soffit Plate
1900-15

Main Arm

Non-Hold Open

Soffit Plate Holder
& Loop Assy.
1900-18
(specify hand when ordering)

Hold Open

Main Arm
Note: Mounting hardware included with all parts ordered
Arm Function

Complete Arm
Assembly

Non-Hold Open

Y1900-5
1900-8R (Right Hand)

Hold Open
1900-8L (Left Hand)

Main Arm

Main Arm Less
Rod & Soffit Plate

Main Arm & Rod Less
Soffit Plate Holder Assy. & Loop Assy.

Y1900-1W

N/A

1900-3W

1900-1M

1900 series

door closer

parts list
parallel rigid arm assemblies

Non-Hold Open

Jackscrew
(see chart)
Locknut
455
Friction Disc
1554
(not visible)

Hold Open

Note: Mounting hardware included with all parts ordered
Arm Function

Complete Arm Assembly

Jackscrew

Non-Hold Open

PR1900-5

N/A

PR1900-8R (Right Hand)

1543R

PR1900-8L (Left Hand)

1543L

Hold Open

1900 series

door closer

parts list
uni stop™ arm assemblies

Main Arm

Non-Hold Open

Main Arm

Hold Open

Note: Mounting hardware included with all parts ordered
Door Width
(cm)

Main Arm
Length* (mm)

28"- 32"
(71 - 81)

Non-Hold Open

Hold Open

9-1/2"
(241)

6130-17

6130-7

33"- 41"
(84 - 104)

11"
(279)

6130-18

6130-8

42"- 48"
(107 - 122)

12-1/2"
(318)

6130-19

6130-9

* Center to center length

Complete Arm Assembly

1900 series

door closer

parts list
miscellaneous parts
Springs

Closer Bodies

24BD

B/D Spring

56EF

E/F Spring

230BC

Spring (prior to 1978 model)

230D

Spring (prior to 1978 model)

230EF

Spring (prior to 1978 model)

1902/4 LAP

Size 2-4 body

1905/6 LAP

Size 5/6 body

screw packs
Sex Nuts

Thru Bolts & Grommet Nuts

SN-134

1-3/4" door

TBGN138-38

1-3/8" door

SN-214

2-1/4" door

TBGN134-38

1-3/4" door

TBGN214-38

2-1/4" door

fasteners
Type

Description

S = standard; O = optional

Arm
RA

UNI STOP™

DOOR
SDST

Self-Drilling Self-Tapping

Machine Screw

Sleeve Nut

TBGN

Thru Bolts & Grommet Nuts

FRAME
SDST

Self-Drilling Self-Tapping

Machine Screw

SN are for use on unreinforced hollow metal
doors or to prevent any hollow metal door
from collapse/dimpling. They can also be
used for thru bolting on wood doors. SN are
supplied for 1-3/4" (44mm) thick doors unless
specified for 2-1/4" (57mm).
TBGN are an alternative to SN for wood
doors. TBGN are supplied standard for
1-3/4" (44mm) thick doors. They can be
specified for 1-3/8" (35mm) thick doors.

1900 series

door closer

how to order
None
PA PR UNI -

- Regular Arm
Parallel Arm
Parallel Rigid Arm
Uni Stop™ Arm
(specify door width)

Delayed Action (Regular
Non-Hold Open Arm
Application Only), Handed

0 - Non-Hold Open
1 - Hold Open
2 thru 4 - 2/4
5 or 6 - 5/6

Prefix

CLOSER SERIES

Note: Contact factory if door weight exceeds 250 lbs.

ARM
FUNCTION

2/4

CLOSER SIZE

SUFFIXES

689

FINISH
(see page 2)

1900 series

door closer

notes

1900 series

door closer

online literature and templates
For the latest information on Yale Locks & Hardware products, visit our website at: www.yalelocks.com
Click on the “Product Information” button to find:
•
•
•
•
•

Catalogs
Parts manuals
Templates
Specifications
Installation instructions

Yale® customers can click on the ebusiness symbol
•
•
•
•

on the website to register for an ebusiness account to:

Check the status of orders
Check availability of QuickShip items
Track your order and confirm delivery
Receive email notification of template changes
And More...

Or contact us at:

U.S.A.

Yale Locks & Hardware
Address: 225 Episcopal Road, Berlin, CT 06037-4004
Tel: 1-800-438-1951 • Fax: 1-800-338-0965 • www.yalelocks.com

Canada:

ASSA ABLOY Door Security Solutions Canada
Address: 160 Four Valley Drive, Vaughan, Ontario L4K 4T9
Tel: 1-800-461-3007 • Fax: 1-800-461-8989 • www.assaabloy.ca

International:

ASSA ABLOY Americas International
Tel: 1-905-821-7775 • Fax: 1-905-821-1429 • www.assaabloyai.com

Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.
Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Uni Stop™ is a trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products'
brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws.
All contents current at time of publication. Yale Security Inc. reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 2001, 2014,
Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc., an ASSA ABLOY Group
company is prohibited.

YALE, with its unique global reach and range of products, is the world’s favorite lock.
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.
42066-2/14RE

An ASSA ABLOY Group brand

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Instance ID                     : uuid:99e82ecf-b402-6940-8ad8-9c32dbb336af
Document ID                     : adobe:docid:indd:9c9d330c-e2c8-11e0-9ad9-d813192d7b1c
Original Document ID            : adobe:docid:indd:9c9d330c-e2c8-11e0-9ad9-d813192d7b1c
Rendition Class                 : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:4AB9267D4A2068118083EE4411DBA192, xmp.iid:4BB9267D4A2068118083EE4411DBA192, xmp.iid:1E37F9B64B2068118083EE4411DBA192, xmp.iid:2233CAA60B2168118F62C79479FC77A5, xmp.iid:9869C66F932068118C14BFB17925C2BC, xmp.iid:D15BC764342068118C14DCC73CBC2AFF, xmp.iid:5E1F5C43362068118C14DCC73CBC2AFF, xmp.iid:B417F4D53A2068118C14DCC73CBC2AFF, xmp.iid:D4A77C513B2068118C14DCC73CBC2AFF, xmp.iid:A0E4311C412068118C14C33F305E8D2B, xmp.iid:76C5C4B9402068118083F83C23F18316, xmp.iid:1FEEE4B22C2068118C14DB03A3E97A1E, xmp.iid:3F962F414E2068118A6DE3C466FD3DF6, xmp.iid:145257216A2068118C149E0F87E0C31A, xmp.iid:824BEBB7322068118A6DE62272C97358, xmp.iid:D67FCDAD352068118A6DE62272C97358, xmp.iid:F9BC1AF4222068118C14C0890833E88B, xmp.iid:ED7B93B57E20681188C6D3BCBBEF5F2B
History When                    : 2011:09:17 14:09:31-04:00, 2011:09:17 14:09:32-04:00, 2011:09:17 14:18:19-04:00, 2011:09:30 08:57:29-04:00, 2011:11:20 10:54:53-05:00, 2011:11:29 12:15:57-05:00, 2011:11:29 12:29:20-05:00, 2011:11:29 13:02:03-05:00, 2011:11:29 13:05:31-05:00, 2012:06:14 08:57:04-04:00, 2012:06:17 06:21:53-04:00, 2012:07:02 17:08:05-04:00, 2012:07:13 08:47-04:00, 2012:08:22 09:43:21-04:00, 2012:09:14 16:03:44-04:00, 2012:09:14 16:24:50-04:00, 2013:06:01 13:42:43-04:00, 2013:06:10 17:13:42-04:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Create Date                     : 2014:02:08 16:19:42-05:00
Modify Date                     : 2014:02:08 16:34:57-05:00
Metadata Date                   : 2014:02:08 16:34:57-05:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 8774 bytes, use -b option to extract), (Binary data 8700 bytes, use -b option to extract)
Doc Change Count                : 148
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 24
Creator                         : Adobe InDesign CS5 (7.0)

EXIF Metadata provided by EXIF.tools

Yale 1900 Series Door Closer Look Viewer Manual For Print

Navigation menu

Versions of this User Manual:

Views

Navigation