Yamaha CLS 200 Quick Connect Rev1 Connection Diagram CLS200QC

User Manual: Yamaha CLS-200 Connection Diagram

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

CLS-200
QUICK-CONNECT GUIDE

CLS-200 Quick-Connect Guide
Introduction
equipped with Dolby® Digital, Dolby® Pro Logic, DTS,
or comparable multi-channel surround-sound capability. For the video portion, you will need a DVD (or LD)
player or a hi-fi stereo VCR and a television or monitor.

Yamaha developed the CLS-200 Home Theater Speaker
package to turn your home into a theater. In addition to
enhancing the sound of a video source, like your VCR,
DVD player, or TV, the CLS-200 also superbly reproduces
audio sources, such as a CD player or a cassette deck.

Refer to the owner’s manuals that came with your other
components for complete instructions and cautions. Be
sure to turn off all power when connecting the speakers.

This Quick-Connect Guide will help you get started.
Study the system plan (Figure 1 below), and then use
the wiring diagram (Figure 2 on opposite page) to
connect the CLS-200 speakers to your A/V receiver. To
properly attain the home theater experience, it should be

NOTE: Label the end of each speaker wire (i.e., left rear, right
front, etc.) before connecting them to the A/V receiver. For wire
runs over 30 feet, use larger 18- or 16-gauge speaker wire.

Tools And Parts
The CLS-200 Home Theater Speaker package consists
of (5) 2-way NS-A200X speakers, (1) SW-5 powered
subwoofer, 100' of speaker wire, and related speaker
owner’s manuals. For the installation, you will also
need the following items:

• Toggle bolts, molly anchor screws, or sheet metal
screws (for securing NS-A200X speakers to walls)
NOTE: If you are unsure of how to securely and safely fasten
speakers to a wall, please contact a reliable source about the best
type of hanger for your particular wall's construction. Secure
installation is the purchaser's responsibility.

• Wire strippers (optional)

System Plan
SW-5 Subwoofer (on floor)

C
NS-A200X

NS-A200X

Sub

(left side, same height as TV)

L

NS-A200X

(right side, same height as TV)

R

(on top or below TV)

6'~ 8' apart

L = Left Channel
R = Right Channel
C = Center Channel
S = Surround Channel

Couch

Listening Area

S
NS-A200X

8'~10' apart

(on stand or wall, at least
ear level or preferably higher)

Figure 1. This overhead view shows a typical system layout
for the CLS-200 Home Theater speaker package.

2

S
NS-A200X
(on stand or wall, at least
ear level or preferably higher)

CLS-200 Quick-Connect Guide
Wiring Diagram
NS-A200X
(Front Right Ch.)

NS-A200X
(Front Left Ch.)

NS-A200X
(Center Channel)
+

-

+
-

A/V Receiver
(Rear Panel)

R

+ Front

Right

-

R

+ Surround

INPUT
OUTPUT

-

+

-

+

Front

-

+ -

+

+ -

+

L

+

-

+

+

Left
Surround

Center

-

L

+

80Hz
50Hz
100Hz

SW-5 Subwoofer
(Rear Panel)

NS-A200X
(Surround Right)

❸

❷

Initial Settings
(on Side Panel)

C

-

+

-

❶

RED = positive (+)
use clear wire

NS-A200X
(Surround Left)

BLK = negative (–)
use clear with
white stripe wire

❶ Strip 1 ⁄4 " off ends of

Speaker Wiring

speaker wires.

❷ Loosen terminals.
❸ Insert speaker wires;
tighten terminals.

Figure 2. CLS-200 system wiring diagram.

3

CLS-200 Quick-Connect Guide
Consumer Precautions
Read these precautions carefully before operating your
CLS-200 speaker system:

• Placing speakers on the same stand or shelf as a
turntable can result in feedback.

• Since the NS-A200X speakers can be wall mounted for
surround use, it is essential that they are firmly secured.
Be sure to consult a reliable source about the best type
of hanger for your particular wall’s construction. Secure
installation is the purchaser’s responsibility.

• Never touch the woofer or tweeter units with your
hand or expose them to excessive physical shock. If
they are dented or bent, the sound will be distorted.

• Do not attach them to thin plywood or soft wall
surface materials as the screws may tear free,
causing the speakers to fall and be damaged, or
resulting in personal injury.

• Lower the power amplifier/receiver volume control
before changing input sources. Never change input
sources (for example, FM to CD) at high listening
levels. Always turn the amplifier/receiver unit off
when installing or removing input cables.

• Do not fasten the NS-A200X speakers to walls with
nails, adhesives, or other unsafe hardware. Longterm use and vibrations may cause them to pull free.

• Any time you note distortion, reduce the volume
control on your power amplifier/receiver to a lower
setting. Never allow your power amplifier to be
driven into “clipping.”

• Do not place any speakers where they are liable to be
knocked over or struck by falling objects. Stable
placement will also ensure better sound performance.

• Do not attempt to clean the speakers with chemical
solvents, as this might damage the finish. To clean,
wipe with a dry, soft cloth.

• The NS-A200X speakers feature a magneticallyshielded design, but there is still a chance that
placing them too close to a TV set might impair
picture color. Should this happen, move the
speakers away from the TV set.

• To prevent the enclosure from warping or discoloring, do not place the speakers where they will be
exposed to direct sunlight or excessive humidity.

Specifications
MODEL:

NS-A200X

SW-5

QUANTITY:

5

1

TYPE:

Satellite Speaker,
Acoustic Suspension

Powered Subwoofer,
Bass Reflex

SPEAKER COMPLEMENT:

Magnetically-shielded

–

5 1 ⁄ 4" High-Compliance, Glass-Filled
Cloth Woofer with Inverted Dust Cover

12" Woofer

1" Glass-Filled Cloth Dome Tweeter

_

SENSITIVITY:

89 dB/1 W/1 m

–

FREQUENCY RESPONSE:

55 Hz ~ 22 kHz (+ 3 dB)

18 ~ 170 Hz (-3 dB)

NOMINAL IMPEDANCE:

8Ω

5Ω

MIN./MAX. AMPLIFIER POWER:

10 W/160 W

Built-in 200 W Advanced YST Amplifier

DIMENSIONS (H X W X D):

10 3 ⁄ 8" H x 7" W x 5 5 ⁄ 8" D

19 11 ⁄ 16" H x 15 3 ⁄ 4" W x 17 1 ⁄ 8" D

WEIGHT:

27 lb (boxed as NS-AP200X)

62.2 lb (boxed)

©1999 YAMAHA ELECTRONICS CORPORATION, USA
6660 Orangethorpe Avenue, Buena Park, CA 90620
PH: (714) 522-9105; FAX: (800) 634-0355
http://www.yamaha.com

4



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2001:05:21 17:49:45
Producer                        : Acrobat Distiller 4.0 for Macintosh
Author                          : Roman
Creator                         : PageMaker 6.5
Title                           : CLS-200 Quick Connect rev1
Modify Date                     : 2001:05:31 10:42:53-07:00
Page Count                      : 4

EXIF Metadata provided by EXIF.tools