Yamaha CRX N560 Firmware Update Procedure_EN_rev1 / N560D MCR Procedure EN Rev1
User Manual: Yamaha CRX-N560 / CRX-N560D / MCR-N560 / MCR-N560D Firmware Update Procedure
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Firmware Update Procedure for CRX-N560/N560D (MCR-N560/MCR-N560D) IMPORTANT NOTICE Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha. Improperly updated products may cause improper operation, and any parts or service required to restore proper operation will not be covered under the Yamaha Limited Warranty. Choose from the following 2 methods to update to the latest firmware. Click here for Firmware Update Through the Internet (Connection to the Internet is required) Click here for Firmware Update by USB (A USB thumb drive is required) In case of error, see the Troubleshooting section [ 1. Firmware Update Through the Internet ] Requirements: Your network CD receiver is connected to the Internet if you can receive Internet radio stations. (See owner’s manual for details) STEP 1 Power on the unit and enter option settings Press OPTION button on the remote control. STEP 2 Start Update Using the UP/DOWN buttons, select menu “System Config” and press ENTER button. After that, select “Firm Update” using UP/DOWN buttons and press Enter button. OPTION UP ENTER DOWN Initially, “Network” is flashing on the display. To perform network update, select “Network” and press Enter button. (Update in progress…) Firmware Update Procedure for CRX-N560/N560D (MCR-N560/MCR-N560D) note: DO NOT interrupt the power or press any buttons during the update. In case the power is accidentally cut off, the network player will restore original firmware. Perform the update procedure from STEP 1 again. Update is completed when “Update success.”, “Please…”, “power off!” is displayed alternately. Then, power off the unit. STEP 3 Confirm updated firmware version Power on and press the OPTION button on the remote control and select “System Config” using the UP/DOWN buttons. Press ENTER and select “Firm Version” accordingly. Press ENTER again to confirm that the firmware version has been updated. XXX.XX (X (XX.XX shows actual firmware version.) Congratulations! You have completed the firmware update. Your player is ready for normal use. [ 2. Firmware Update by USB ] Requirements: ・ ・ USB thumb drive, with enough free space to store the firmware. （File system with FAT16 or FAT32 format） Firmware file provided by Yamaha. STEP 1 Insert the USB thumb drive on the front panel. STEP 2 Power on the unit and enter option settings OPTION UP Press OPTION button on the remote control. STEP 3 Start Update DOWN Using the UP/DOWN buttons, select menu “System Config” and press ENTER button. After that, select “Firm Update” using UP/DOWN buttons and press Enter button. ENTER Firmware Update Procedure for CRX-N560/N560D (MCR-N560/MCR-N560D) Initially, “Network” is flashing on the display. To perform USB update, select “USB” using UP/DOWN buttons and press Enter button. (Update in progress…) note: DO NOT interrupt the power or press any buttons during the update. In case the power is accidentally cut off, the network player will restore original firmware. Perform the update procedure from STEP 1 again. Update is completed when “Update success.”, “Please…”, “power off!” is displayed alternately. Then, power off the unit. STEP 4 Confirm updated firmware version Power on and press the OPTION button on the remote control and select “System Config” using the UP/DOWN buttons. Press ENTER and select “Firm Version” accordingly. Press ENTER again to confirm that the firmware version has been updated. XXX.XX (X (XX.XX shows actual firmware version.) Congratulations! You have completed the firmware update. Your player is ready for normal use. Firmware Update Procedure for CRX-N560/N560D (MCR-N560/MCR-N560D) [ 3. Troubleshooting ] In case error message appeared during the update and unable to power on, perform following update procedure. STEP 1 Copy the update file to a USB thumb drive Unzip the downloaded file and copy to the root directory of a USB thumb drive. Be sure to delete all other files in a USB thumb. STEP 2 Insert the USB thumb drive on the front panel In this step, AC power cable needs to be disconnected. The disconnection needs to be kept for several minutes. STEP 3 Enter firmware update mode Connect AC power cable to AC outlet, while pressing ”USB UPDATE” will be shown in the front panel display. button. Firmware update will be started automatically. note: DO NOT interrupt the power or press any buttons during the update. In case the power is accidentally cut off, perform the update procedure from STEP 1 again. Update is completed when “Update success.”, “Please…”, “power off!” is displayed alternately. Then, power off the unit. STEP 4 Confirm updated firmware version Power on and press the OPTION button on the remote control and select “System Config” using the UP/DOWN buttons. Press ENTER and select “Firm Version” accordingly. Press ENTER again to confirm that the firmware version has been updated.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Instance ID : uuid:d495f49f-3be5-4f30-9766-7498c9ca5780 Document ID : uuid:2E18C3B4-DFDD-25A7-2C78-CE6EBEFA7500 Producer : Acrobat Distiller 11.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2016:11:25 18:47:45+09:00 Create Date : 2014:04:10 17:52:27+09:00 Metadata Date : 2016:11:25 18:47:45+09:00 Format : application/pdf Title : Microsoft Word - CRX-N560 Firmware Update Procedure_EN_rev1 Creator : murata History Action : linearized, encrypted History Software Agent : PDFlib PLOP 5.0 (.NET/Win64), PDFlib PLOP 5.0 (.NET/Win64) History When : 2016:11:25 18:47:45+09:00, 2016:11:25 18:47:45+09:00 Page Count : 4 Author : murataEXIF Metadata provided by EXIF.tools