Yamaha Cl5 Cl3 Cl1 Data Sheet 名称未設定 1

: Yamaha Cl5-Cl3-Cl1-Data-Sheet yamaha-cl5-cl3-cl1-data-sheet-647329 yamaha pdf

Open the PDF directly: View PDF .
Page Count: 5

Rear Panel

Rear Panel

Rear Panel

CL Series

CL5

CL3

CL1

Digital Mixing Console

CL Series

Versatile, creative consoles for expressive engineering.

• Naturally superior sound plus a comprehensive range of “coloring” options.

• Acclaimed Yamaha Centralogic concept at the core of a refined user interface.

• Separate console and I/O rack components communicate via Dante™ network audio protocol.

• Up to eight I/O rack units can be connected to each console. 5U size Rio3224-D I/O unit provides 32 ins, 16 outs, and four AES/EBU outputs. 3U

size Rio1608-D I/O unit has 16 ins and 8 outs.

• I/O rack unit sharing allows multiple consoles to be control the same I/O unit, with gain compensation.

• Virtual “Premium Rack” with VCM models of the renowned Neve Portico 5033 equalizer and Portico 5043 compressor/limiter, plus other VCM

equalizers, compressors, and studio-quality effects.

• Virtual “Effect Rack” allows simultaneous use of up to 8 effects from a selection of 46 ambience effects and 8 insertion effects.

• Virtual “GEQ Rack” allows graphic EQ to be inserted into the output buses as required for room equalization and other functions.

• Seamlessly integrated remote control and offline editing via an Apple iPad® or other computer.

• Network redundancy supported for maximum reliability.

• Every detail – faders, knobs, switches, indicators, displays, etc. – designed for optimum operating feel.

• 2-track mp3 recording to USB memory.

• Tight integration with Nuendo Live (included) for serious live multitrack recording.

• Multitrack recordings can be used for “virtual sound checks” when the performers aren’t available.

• Three Mini-YGDAI card slots provide easy I/O expansion as well as extra processing capabilities.

• Lake® processing can be added via expansion slots.

• Other features: editable channel names and colors, user defined keys and knobs, 300 scene memories, input and output delays, ample EQ and

dynamics processing, 16 DCA groups, 8 mute groups, 5-in/5-out GPI interface, multiple user key sets, on-screen help, and more.

[CL5]

Three-section fader layout for efficient hands-on control. The CL5 is the ideal choice for a diverse spectrum of live sound systems.

• Input channels: 72 mono, 8 stereo.

• Fader configuration: 16-fader left section, 8-fader Centralogic section, 8-fader right section, 2-fader master section.

• Aluminum stay for iPad support.

• Built-in meter bridge.

[CL3]

An ideal blend of compact size and channel capacity for a variety of live and installed applications.

• Input channels: 64 mono, 8 stereo.

• Fader configuration: 16-fader left section, 8-fader Centralogic section, 2-fader master section.

• Aluminum stay for iPad support.

• Meter bridge optional.

[CL1]

Dual 8-fader sections in a space-saving console that can be used alone or cascaded to another CL console for input expansion.

• Input channels: 48 mono, 8 stereo.

• Fader configuration: 8-fader left section, 8-fader Centralogic section, 2-fader master section .

• Meter bridge optional.

OPTIONS

LA1L

Gooseneck Lamp

MBCL

Meter Bridge

The optional CL3 and CL1 Meter Bridge fits

right above the console's display and provides

high-visibility level monitoring while allowing

the display to be used for other operations.

PSL360

Power Supply Link Cable

GENERAL SPECIFICATIONS (PW800W)

When a CL unit is

added the internal

power supply and

the PW800W provide

redundant failsafe

operation.

Two rack-mountable I/O units with different input and output capacities are available for use with the CL series consoles. The 5U

size Rio3224-D provides 32 ins, 16 outs, and four AES/EBU outputs, while the 3U size Rio1608-D has 16 ins and 8 outs. Both types

connect to the console via Dante network protocol for low-jitter, low-latency digital audio communication.

PW800W

Power Supply Unit

Rio3224-D

Rio1608-D

I/O RACK

3U

5U

3U

Rear Panel

Power requirements AC100-240V 50/60Hz

Power consumption 1000W

When using with CL5: 200W (Max)

When using with CL3: 200W (Max)

When using with CL1: 200W (Max)

Dimensions (W x H x D) 480 x 142 x 384mm (18.7" x 5.5" x 14.98")

Weight 10kg (22lbs)

Rio3224-D

Rio1608-D

1053

299

130

201

667

15

15

839

201

130

299

667

389

535

374

299

201

130

667

648

15

CL Series

*1 Total harmonic distortion is measured with a 18dB/Oct filter @80kHz.

*2 Hum & noise level is measured with a 6dB/oct filter @12.7kHz; equivalent to 20kHz filter with

infinite dB/Oct attenuation.

*3 Crosstalk is measured with a 30 dB/octave filter @22kHz.

** Excluded MBCL optional meter bridge.

*1. Input pins: Internal TTL-level pull-up

resistors provided (47kΩ). Output pins:

Open-drain output (Vmax = 12V, max.

sink current/pin = 75mA)

Power pins: Output voltage Vp = 5V,

max. output current Imax = 300mA

*2. Pin 4 = +12V, Pin 3 = GND, lamp

rating 5W. Software voltage control.

unit : mm

CL5 CL3 CL1

GENERAL SPECIFICATIONS

Sampling frequency rate Internal: 44.1kHz, 48kHz

External: 44.1kHz (+4.1667%, +0.1%, -0.1%, -4.0%) ±200ppm

48kHz (+4.1667%, +0.1%, -0.1%, -4.0%) ±200ppm

Signal Delay Less than 2.5 ms OMNI IN to OMNI OUT (@fs=48kHz)

Total harmonic distortion*1

OMNI IN to OMNI OUT

Input Gain=Min.

Less than 0.05% 20Hz to 20kHz @+4dBu into 600Ω

Frequency response

CH INPUT to OMNI OUT

+0.5, -1.5dB 20Hz to 20kHz, refer to +4dBu output @1kHz,

OMNI IN to OMNI OUT

Dynamic range

(maximum level to noise level)

112dB typ., DA Converter,

108dB typ., OMNI IN to OMNI OUT, Input Gain = Min.

Hum & noise level*2

(20Hz to 20kHz), Rs=150Ω

-128dBu Equivalent input noise, Input Gain=Max.,

-84dBu Residual output noise, ST master off

Crosstalk (@1kHz)

Input Gain=Min.

-100dB*3, Adjacent OMNI IN/OMNI OUT channels

Phantom Power +48V

Power requirements AC110V-240V, 50/60Hz

Power consumption CL5/CL3/CL1: 170W, Internal Power Supply

CL5/CL3/CL1: 200W, Simultaneous use of Internal PSU and

External PW800W

Dimensions (W x H x D) CL5: 1053 x 299 x 667mm (41.5" x 11.8" x 26.3")

CL3: 839 x 299** x 667mm (33.1" x 11.8" x 26.3")

CL1: 648 x 299** x 667mm (25.5" x 11.8" x 26.3")

Weight CL5: 36kg (79.4lbs)

CL3: 29kg (63.9lbs)

CL1: 24kg (52.9lbs)

ANALOG INPUT SPECIFICATIONS

ANALOG OUTPUT SPECIFICATIONS

Input terminal

GAIN

Actual

source

impedance

For use with

nominal

Input level

Connector

Sensitivity Nominal Max.

before clip

OMNI IN 1-8

+66dB

10kΩ

50-600Ω Mics

& 600Ω Lines

-82dBu -62dBu -42dBu

XLR3-31 type*

+18dB -34dBu -14dBu +6dBu

+17dB

3kΩ

-33dBu -13dBu +7dBu

-6dB -10dBu +10 dBu +30dBu

TALKBACK

+64dB

10kΩ50-600Ω Mics

& 600Ω Lines

-70dBu -60dBu -40dBu

XLR3-31 type*

+20dB -26dBu -16dBu +4dBu

Output terminal Actual source

impedance

For use with

nominal GAIN SW

Output terminals

Connector

Nominal Max.

before clip

OMNI OUT 1-8 75Ω600Ω Lines

+24dB +4dBu +24dBu

XLR3-32 type*

+18dB -2dBu +18dBu

PHONES 15Ω

8Ω Phones —75mW 150mW

ST Phone Jack**

40Ω Phones —65mW 150mW

DIGITAL I/O SPECIFICATIONS

DIGITAL OUTPUT SPECIFICATIONS

I/O Slot (1-3) SPECIFICATIONS

Terminal Format

Data length

Level Audio Connector

Primary/Secondary Dante

24bit or 32bit

1000Base-T 64ch Input/64ch Output

@48kHz etherCON Cat5e

Terminal Format

Data length

Level Connector

DIGITAL OUT AES/EBU AES/EBU Professional

Use 24bit RS422 XLR3-32 type*

Each I/O Slot accepts a Mini-YGDAI card. Only Slot1 has a serial interface.

CONTROL I/O SPECIFICATIONS

Terminal Format Level

MIDI IN MIDI —

OUT MIDI —

WORD CLOCK IN —TTL/75Ω terminated

OUT —TTL/75Ω

GPI (5IN/5OUT) — —

NETWORK IEEE802.3 10BASE-T/100Base-TX/

LAMP (CL5=3, CL3=2, CL1=1) — 0V - 12V

USB HOST USB 2.0 —

EXT DC IN — —

Meter Bridge (CL3/CL1 only) — —

DIMENSIONS

CL Series

BLOCK DIAGRAM 1/2

CL Series

BLOCK DIAGRAM 2/2

Applications

Star topologies can be congured with network switches. In this congura on,

redundant connec ons to each device on the network ensure that a

malfunc on in one cable or network device will not disrupt the en re

system. The Gain Compensa on feature allows mul ple consoles to control

analog gain for a single I/O rack, for seamless integra on of FOH and

monitor opera on. Mul ple computers can be used for live recording, too.

A Simple Daisy-chain System A Flexible, Redundant Star Network

Rio3224-D

Rio3224-D

CL5CL StageMix

Wi-Fi

Access

Point

PC for Live Recording

Rio3224-D Rio3224 -D

SP2060

AES/EBU

CL StageMix

Rio1608 -DCL5

CL3

CL StageMix

FoH

Monitor

Wi-Fi

Access

Point

Wi-Fi

AccessPoint

PC for Live Recording

PC for Live Recording Primary Switch

Primary Switch

Secondary Switch

Secondary Switch

System Examples: Live Sound

Internal port switches allow the CL series to be easily set up for daisy-chain

or star network congura ons. In this example the Console at FOH posi on

is directly connected to the I/O rack at the side of the stage. The network

is self-congured. Of course the CL StageMix iPad app can be used even in

simple systems like this one, and Dante Virtual Soundcard can be used to

enable mul track recording to a DAW such as Steinberg's Nuendo Live.