Yamaha HTR 6240 Owners Manual

If not then HTR-6240_manual Manual: ://www.yamaha.com/yamahavgn/s/YEC/AV_Receivers/Manual/HTR-6240_manual

User Manual: Yamaha HTR-6240 Owners Manual

Open the PDF directly: View PDF PDF.
Page Count: 72

DownloadYamaha HTR-6240 Owners Manual
Open PDF In BrowserView PDF
U

HTR-6240
AV Receiver

OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

1
2
3
4
5
6
7
8

9
•

Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.

10

11
12

13
14

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority,
granted by the FCC, to use the product.
2 IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3 NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class “B”
digital devices. Compliance with these requirements provides a
reasonable level of assurance that your use of this product in a
residential environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the users
manual, may cause interference harmful to the operation of other
electronic devices.

Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is
found to be the source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate the
problem by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please
contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe
Ave, Buena Park, CA 90620.
The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.

Caution-i En

Caution: Read this before operating your unit.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place – away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold. Allow ventilation space of at least
30 cm on the top, 20 cm on the left and right, and 20 cm on
the back of this unit.
3 Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign objects may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to
this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections
are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury. Yamaha
will not be held responsible for any damage resulting from use
of this unit with a voltage other than specified.
13 To prevent damage by lightning, keep the power cord and
outdoor antennas disconnected from a wall outlet or the unit
during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
16 Install this unit near the AC outlet and where the AC power
plug can be reached easily.

Caution-ii En

17 Be sure to read the “Troubleshooting” section on common
operating errors before concluding that this unit is faulty.
18 Before moving this unit, press ASTANDBY/ON to set this
unit in the standby mode, and disconnect the AC power plug
from the wall outlet.
19 VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
into the AC wall outlet. Voltages are:
.......AC 110/120/220/230–240 V, 50/60 Hz (General model)
.......................... AC 220/230–240 V, 50/60 Hz (Asia model)
20 The batteries shall not be exposed to excessive heat such as
sunshine, fire or like.
21 Excessive sound pressure from earphones and headphones can
cause hearing loss.
22 When replacing the batteries, be sure to use batteries of the
same type. Danger of explosion may happen if batteries are
incorrectly replaced.

WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
As long as this unit is connected to the AC wall outlet,
it is not disconnected from the AC power source even
if you turn off this unit by A STANDBY/ON. In this
state, this unit is designed to consume a very small
quantity of power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
POUR LES CONSOMMATEURS CANADIENS
Pour éviter les chocs électriques, introduire la lame la
plus large de la fiche dans la borne correspondante de
la prise et pousser jusqu’au fond.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.

Contents
INTRODUCTION

Front panel ................................................................. 4
Rear panel .................................................................. 5
Front panel display..................................................... 6
Remote control........................................................... 7

Quick start guide..................................................... 8
L

Preparing remote control ....................................... 9
Installing batteries in the remote control ................... 9
Using the remote control............................................ 9

Connections ...........................................................10

Using Auto Setup..................................................... 18
When an error message is displayed during
measurement........................................................ 20
When a warning message is displayed after
measurement........................................................ 20

BASIC OPERATION
Basic procedure........................................................ 21
Using the SCENE function ...................................... 21
Muting audio output temporarily (MUTE) .............. 22
Adjusting high/low frequency sound
(tone control) ....................................................... 22
Enjoying pure hi-fi sound ........................................ 22
Using the sleep timer ............................................... 22
Using your headphones............................................ 22
Displaying input signal information ........................ 23
Changing information on the front panel display .... 23

Selecting a decoder used with a sound field program
............................................................................. 36
Setting sound field parameters................................. 36
Sound field parameters ............................................ 36

Operating various settings for this unit
(Setup menu) ..................................................... 38
Basic operation of the setup menu........................... 39
Speaker Setup .......................................................... 39
Sound Setup ............................................................. 41
Function Setup ......................................................... 42
DSP Parameter......................................................... 43
Memory Guard......................................................... 43

Controlling other components with the remote
control................................................................ 44
Setting remote control codes.................................... 44
Resetting all remote control codes........................... 44

Advanced setup..................................................... 45

APPENDIX
Troubleshooting.................................................... 46
General..................................................................... 46
HDMI....................................................................... 49
Tuner (FM/AM)....................................................... 49
Remote control......................................................... 50
iPod .......................................................................... 50
Bluetooth™.............................................................. 51
Auto Setup (YPAO)................................................. 51

Glossary ................................................................. 53
Sound field program information ....................... 55
Information on HDMI™...................................... 55
Specifications......................................................... 56
Index ...................................................................... 57

APPENDIX

Playback.................................................................21

OPTION menu items ............................................... 33

Editing surround decoders/sound field programs
............................................................................ 36

ADVANCED
OPERATION

Optimizing the speaker setting for your listening
room (YPAO) ....................................................18

Setting the option menu for each input source
(OPTION menu) ............................................... 33

BASIC
OPERATION

Placing speakers....................................................... 10
Connecting speakers ................................................ 11
Information on jacks and cable plugs ...................... 13
Connecting a TV monitor or projector .................... 14
Connecting other components ................................. 15
Connecting a Yamaha iPod universal dock or
Bluetooth™ wireless audio receiver.................... 16
Using the VIDEO AUX jacks on the front panel .... 16
Connecting the FM and AM antennas ..................... 17
Connecting the power cable..................................... 17
Turning this unit on and off ..................................... 17

ADVANCED OPERATION

PREPARATION

PREPARATION

Pairing the Bluetooth™ wireless audio receiver and
your Bluetooth component .................................. 32
Playback of the Bluetooth™ component ................. 32

INTRODUCTION

Features.................................................................... 2
About this manual................................................... 3
Supplied accessories................................................ 3
Part names and functions....................................... 4

Using Bluetooth™ components ........................... 32

(at the end of this manual)
List of remote control codes...................................i

Enjoy the sound field programs ..........................24
Selecting sound field programs................................ 24
Enjoying unprocessed input sources (Straight
decoding mode) ................................................... 27
Enjoying sound field programs without surround
speakers (Virtual CINEMA DSP) ....................... 27
Enjoy sound field programs with headphones
(SILENT CINEMA™) ........................................ 27

FM/AM tuning ...................................................... 28

English

Tuning in to the desired FM/AM station (Frequency
tuning).................................................................. 28
Registering FM/AM stations and tuning in (Preset
tuning).................................................................. 28

Using iPod™ ..........................................................30
Controlling iPod™................................................... 30

1 En

INTRODUCTION
Features
■ Built-in 5-channel power amplifier
• Minimum RMS output power (1 kHz, 0.9% THD, 8 Ω)
• FRONT L/R: 105 W + 105 W
• CENTER: 105 W
• SURROUND L/R: 105 W + 105 W
■ Speaker/Preout outputs
• Speaker jacks (5-channel), preout output jacks
(surround back L/R, subwoofer)
■

Input/Output terminals

Input terminals
• HDMI input x 4
• Audio/Visual input
[Audio] Digital input (coaxial) x 2, digital input
(optical) x 2, analog input x 2
[Video] Component video x 2, composite video x 4
• Audio input (analog) x 2
• Dock input x 1
• V-AUX input
[Audio] Analog x 1
[Video] Composite video x 1
Output terminals
• Monitor output
[Audio/Video] HDMI x 1
[Video] Component video x 1, Composite video x 1
• Audio/Visual output
[Audio] Analog x 1
[Video] Composite video x 1
• Audio output
Analog x 1
■
•
•
•
•

Proprietary Yamaha technology for the
creation of sound fields
CINEMA DSP
Compressed Music Enhancer mode
Virtual CINEMA DSP
SILENT CINEMA

■ Digital audio decoders
• Dolby TrueHD, Dolby Digital Plus decoder
• DTS-HD Master Audio, DTS-HD High Resolution
Audio, DTS Express
• Dolby Digital/Dolby Digital EX decoder
• DTS, DTS 96/24 decoder, DTS-ES Matrix 6.1,
DTS-ES Discrete 6.1
• Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic
IIx decoder
• DTS NEO:6 decoder
■ Sophisticated FM/AM tuner
• 40-station random and direct preset tuning
• Automatic preset tuning

2 En

■

HDMI™
(High-Definition Multimedia Interface)
• HDMI interface for standard, enhanced or highdefinition video as well as multi-channel digital audio.
– Automatic audio and video synchronization (lip sync)
information capability
– Deep Color video signal (30/36 bit) transmission
capability
– “x.v.Color” video signal transmission capability
– High refresh rate and high resolution video signals
capability
– High definition digital audio format signals capability
■ DOCK terminal
• DOCK terminal to connect a Yamaha iPod universal
dock (such as YDS-11, sold separately) or Bluetooth
wireless audio receiver (such as YBA-10, sold
separately)
■ Automatic speaker setup features
• “YPAO” (Yamaha Parametric Room Acoustic
Optimizer) for automatically optimizing speaker
outputs suitable for listening environments.
■ Other features
• 192-kHz/24-bit D/A converter
• Direct mode for pure hi-fi sound for all sources
• Adaptive dynamic range controlling capability
• Sleep timer

About this manual

Bluetooth™
Bluetooth is a registered trademark of Bluetooth SIG and is used by
Yamaha in accordance with a license agreement.

PREPARATION

Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are trademarks of Dolby
Laboratories
“HDMI,” the “HDMI” logo and “High-Definition Multimedia
Interface” are trademarks, or registered trademarks of HDMI
Licensing LLC.

iPod™

x.v.Color™
“x.v.Color” is a trademark of Sony Corporation. “SILENT CINEMA”
is a trademark of Yamaha Corporation.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

“iPod” is a trademark of Apple Inc., registered in the U.S. and other
countries.

ADVANCED
OPERATION

Supplied accessories

BASIC
OPERATION

Manufactured under license under U.S. Patent No’s:
5,451,942;5,956,674;5,974,380;5,978,762;6,226,616;6,487,535 &
other U.S. and worldwide patents issued & pending. DTS is a
registered trademark and the DTS logos, Symbol, DTS-HD and DTSHD Master Audio are trademark of DTS, Inc. © 1996-2007 DTS, Inc.
All Rights Reserved.

INTRODUCTION

• y indicates a tip for your operation.
• Some operations can be performed by using either the keys on the front panel or the ones on the remote control. In case the key names differ between
the front panel and the remote control, the key name on the remote control is given in parentheses.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of
differences between the manual and product, the product has priority.
• “ASTANDBY/ON” or “gHDMI 1” (example) indicates the name of the parts on the front panel or the remote control. Refer to the attached sheet
or the pages at the end of this manual for the information about each position of the parts.
• ☞ indicates the page describing the related information.

ADDITIONAL
INFORMATION

Check that you received all of the following parts.
• Remote control
• Batteries (2) (AAA, R03, UM-4)
• Optimizer microphone
• AM loop antenna
• Indoor FM antenna

APPENDIX
English

3 En

Part names and functions
Front panel
U

T

D

E

F

G

H

P

VOLUME

HDMI THROUGH

INFO

l

MEMORY

PRESET

h

l

AM

FM

TUNING

h

SCENE

BD/DVD

PHONES

TONE CONTROL

PROGRAM

l

STANDBY
/ON

A

CD

STRAIGHT

DIRECT

C

INFO

B

C

J

K

LM

PRESET l / h

F

FM

G

AM

INPUT l / h

O

OPTIMIZER MIC jack

TUNING l / h
SCENE
Switches between linked sets of input sources and sound field
programs (see page 21).

J

TONE CONTROL
Adjusts high-frequency/low-frequency output of speakers (see
page 22).

K

PROGRAM l / h

L

STRAIGHT

Changes sound field programs (see page 24).
Changes a sound field program to straight decoding mode (see
page 27).

4 En

S

For connecting the supplied optimizer microphone and adjusting
output characteristics of speakers (see page 18).

P

VOLUME control

Q

VIDEO (VIDEO AUX) jack

Controls the volume of this unit (see page 21).
For connecting the video output cable of a camcorder or game
console (see page 16).

R

AUDIO L/R (VIDEO AUX) jack
For connecting the audio output cable of a camcorder or game
console (see page 16).

S

PORTABLE (VIDEO AUX) jack
For connecting the audio output cable of a portable music player
(see page 16).

Changes FM/AM tuner frequencies (see page 28).

I

R

PORTABLE

Selects an input source (see page 21).

Sets the FM/AM tuner band to AM (see page 28).

H

Q

AUDIO

Changes a sound field program to direct mode (see page 22).

Selects an FM/AM preset station (see page 29).
Sets the FM/AM tuner band to FM (see page 28).

I

N

Registers FM/AM stations as preset stations (see page 29).

E

O

DIRECT

Changes information display screens on the front panel display
(see page 23).

MEMORY

N

M

For plugging headphones (see page 22).

D

VIDEO AUX

OPTIMIZER MIC

h

VIDEO

Switches this unit between standby and on (see page 17).

PHONES jack

INPUT

EFFECT

STANDBY/ON

B

RADIO

l

h

SILENT CINEMA

A

TV

T

Front panel display

U

HDMI THROUGH

Displays information on this unit (see page 6).
Lights up during pass-through output of an HDMI signal input
to this unit while this unit is on standby (see page 42).

Part names and functions

Rear panel
c

b

k

d

INTRODUCTION

a

(BD/DVD)

DOCK

HDMI 2

HDMI 1

HDMI OUT

HDMI 3

ANTENNA

HDMI 4

CENTER

UNBAL.

PR

SPEAKERS

FRONT

COMPONENT
VIDEO

COMPONENT
VIDEO

SURROUND

PR

GND AM

PREPARATION

FM

PB

PB
VIDEO

VIDEO

Y

Y
MONITOR OUT

OPTICAL

COAXIAL

COAXIAL

AV 2

AV 3

( TV )

AV 1

OPTICAL

(CD)

AV 4

a

AV 6

AV
OUT

f

AUDIO1

AUDIO
OUT

AUDIO2

g

h

i

SURROUND BACK

SUBWOOFER

PRE OUT

BASIC
OPERATION

e

AV 5

j

DOCK terminal
For connecting an optional Yamaha iPod universal dock (YDS11) or Bluetooth wireless audio receiver (YBA-10) (see
page 16).

b

HDMI OUT/HDMI 1-4

c

ANTENNA jack

d

SPEAKERS terminal

ADVANCED
OPERATION

For connecting an HDMI-compatible video monitor or external
components for HDMI inputs 1-4 (see page 15).
For connecting supplied FM and AM antennas (see page 17).
For connecting front right and left, center and surround speakers
(see page 11).

e

AV 1-6

ADDITIONAL
INFORMATION

For connecting external components for audio/visual inputs 1-6
(see page 15).

f

AV OUT
Outputs audio/visual signals from a selected analog input source
to an external component (see page 16).

g

AUDIO 1/2
For connecting external components for audio inputs 1-2 (see
page 16).

h

MONITOR OUT
Outputs visual signals from this unit to a video monitor, such as
a TV (see page 14).

APPENDIX

i

AUDIO OUT
Outputs audio signals from a selected analog input source to an
external component (see page 16).

j

PRE OUT
Outputs the surround back L/R channel signals and subwoofer
channel signals. For connecting an external amplifier or
subwoofer (see page 11).

k

Power Cable
For connecting this cable to an AC wall outlet (see page 17).

English

5 En

Part names and functions

Front panel display
a

b

c

d
SLEEP

STEREO
TUNED

f

e
VOL.
MUTE
SW
C
L
R
SL
SR
SBL SB SBR

g
a

h

HDMI indicator
Lights up during normal communication when HDMI is
selected as an input source.

b

CINEMA DSP indicator
Lights up when a sound field program that uses CINEMA DSP
is selected.

c

Tuner indicator
Lights up while receiving a radio broadcast signal from an FM/
AM station (see page 28).

d

SLEEP indicator

e

VOLUME indicator

f

MUTE indicator

g

Cursor indicators

Lights up when the sleep timer is activated (see page 22).
Displays volume levels.
Flashes when audio is muted.
Light up if corresponding cursors on the remote control are
available for operations.

h

Multi information display

i

Speaker indicators

Displays menu items and settings for the current operation.
Indicate speaker terminals or the PRE OUT jack from which
signals are currently output.
Subwoofer
Front L
Surround L
Surround back L

SW
C

L
R
SL
SR
SBL SB SBR

Center
Front R
Surround R
Surround back R
Surround back

6 En

g

i

Part names and functions

Remote control
g

b

HDMI 1-4
AV 1-6
AUDIO 1/2
V-AUX

CODE SET

TRANSMIT

c
d

POWER
SOURCE

POWER
SLEEP

e

HDMI

1

2

1

2

3

4

3

4

Input selection keys

f
[A]/[B]

AV

5

6

1

2

V-AUX

[ A ]

[ B ]

DOCK

DOCK

TUNER

TUNER

h

h
FM

AM
PRESET

i

MEMORY

MOVIE

MUSIC

FM
AM
MEMORY
PRESET k / n
TUNING k / n

ENHANCER SUR. DECODE

j

STEREO
STRAIGHT

DIRECT

i

SCENE

k
l

BD
DVD

TV

CD

SETUP

Tuner keys

Presets radio stations.
Selects a preset station.
Changes tuning frequencies.

INFO
Changes the information shown on the front panel display (see
page 23).

RADIO

m

OPTION

Switches a band between FM and AM.

j

Sound selection keys

k

SCENE

BASIC
OPERATION

INFO

TUNING

PREPARATION

g

AUDIO

Selects HDMI inputs 1 through 4.
Selects AV inputs 1 through 6.
Selects AUDIO inputs 1 and 2.
Selects the V-AUX jack on the front
panel of this unit.
To control external components using
the rExternal component
operation keys separately from
operations of this unit (see page 44).
Selects a Yamaha iPod universal dock/
Bluetooth wireless audio receiver
connected to the DOCK jack.
Selects the FM/AM tuner.

INTRODUCTION

a

Selects sound field programs (see pages 22 and 24).

n

TOP
MENU

MENU

MUTE

q

p

l

SETUP

m

OPTION

n

Cursors k / n / l / h/ENTER/RETURN

Displays the setup menu (see page 39).
REC

ADVANCED
OPERATION

Switches between linked sets of input sources and sound field
programs (see page 21).

DISPLAY

RETURN

r

o

VOLUME

ENTER

Displays the option menu (see page 33).
2

3

4

5

6

7

8

9

0

10

Cursors k / n / l / h Select menu items displayed on the

ENT

ENTER
RETURN

TV
INPUT

t

POWER
TV VOL

TV CH

MUTE

o

VOLUME +/–

p

DISPLAY

front panel display or change
settings.
Confirms a selected item.
Returns to the previous screen or
ends the menu screen.

ADDITIONAL
INFORMATION

s

1

Adjust the volume of this unit (see page 21).

Remote control signal transmitter

b

TRANSMIT

Transmits infrared signals.

Changes the operation mode of the iPod connected to the
Yamaha iPod universal dock (see page 30).

q

Turns the mute function of the sound output on and off (see
page 22).

Lights up when a signal is output from the remote control.

c

CODE SET

r

SOURCE POWER

s

Numeric keys

t

TV control keys

Enter numbers.

Switches an external component on and off.

e

SLEEP

f

Operate a monitor such as a TV or projector.

English

Switches the sleep timer operations (see page 22).

External component operation keys
Operate recording, playback etc. of external components (see
page 44).

Sets remote control codes for external component operations
(see page 44).

d

MUTE

APPENDIX

a

POWER
Switches this unit on and standby.

7 En

Quick start guide
When you use this product for the first time, perform setup following the steps below. See the related pages for details on
operations and settings.

Step 1: Prepare items for setup

Step 2: Set up your speakers

Prepare speakers, DVD player, cables, and other items
necessary for setup.
For example, prepare the following items for setting up a
5.1-channel sound system.
Front right speaker

Place your speakers in the room and connect them to this
unit.
• Placing speakers
• Connecting speakers

☞P. 10
☞P. 11

y

Video monitor

• This unit has a YPAO (Yamaha Parametric Room Acoustic Optimizer)
that automatically optimizes this unit based on room acoustic
characteristics (audio characteristics of the speakers, speaker positions,
and room acoustics, etc.).
You can enjoy good balanced sound without special knowledge by using
the YPAO technology (see page 18).

Subwoofer
Front left speaker

Step 3: Connect your components
Connect your TV, DVD player, or other components.

Center speaker
Components
(such as DVD player)

Surround right speaker

• Connecting a TV monitor or projector
• Connecting other components
• Connecting a Yamaha iPod universal dock or
Bluetooth wireless audio receiver
• Connecting the FM and AM antennas

☞P. 14
☞P. 15
☞P. 16
☞P. 17

Surround left speaker

Step 4: Turn on the power
Requirements
Speakers

qty.

Front speaker

2

Center speaker

1

Surround speaker

2

Active subwoofer

1

Speaker cable

5

Subwoofer cable

1

Reproduction component such as DVD player

1

Video monitor such as TV

1

Video cable or HDMI cable

2

Audio cable

2

y
• Prepare two speakers (for front). The priority of the requirement of other
speakers is as follows:
1 Two surround speakers
2 One center speaker
• For surround back speakers, prepare speakers with a another amplifier
connected.
• If your video monitor is a CRT, we recommend that you use magnetically
shielded speakers.

8 En

Connect the power cable and turn on this unit.
• Connecting the power cable
• Turning this unit on and off

☞P. 17
☞P. 17

Step 5: Select the input source and start
playback
Select the component connected in the step 3 as an input
source and start playback.
• Basic procedure
• Selecting sound field programs

☞P. 21
☞P. 24

y
• This unit supports the SCENE function that changes the input source and
sound field program at one time. Four scenes are preset for different
purposes for Blu-ray disc, DVD and CD, and you can select from a scene
from those just by pressing a remote control key. See page 21 for details.

PREPARATION
Preparing remote control

1

Using the remote control
The remote control transmits a directional infrared ray. Be
sure to aim the remote control directly at the remote
control sensor on this unit during operation.

3
Remote control sensor window

PREPARATION

2
30

2

Insert the two supplied batteries (AAA, R03,
UM-4) according to the polarity markings (+
and –) on the inside of the battery
compartment.
Snap the battery compartment cover back
into place.
Notes

Notes
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or stove
– places of extremely low temperatures
– dusty places

y
• You can operate external components with this remote control by setting
the remote control code. See page 44 for details.

ADDITIONAL
INFORMATION
APPENDIX

• Change all batteries if you notice the following conditions:
– the operation range of the remote control narrows
– the transmit indicator does not flash or is dim
• Do not use old batteries together with new ones.
This may shorten the life of the new batteries or cause old batteries
to leak.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Specification of batteries may be
different even though they look the same.
• If you find leaking batteries, discard the batteries immediately,
taking care not to touch the leaked material. If the leaked material
comes into contact with your skin or gets into your eyes or mouth,
rinse it away immediately and consult a doctor. Clean the battery
compartment thoroughly before installing new batteries.
• Dispose of the old batteries correctly in accordance with your local
regulations.
• If the remote control is without batteries for more than 2 minutes,
or if exhausted batteries remain in the remote control, the contents
of the memory may be cleared. In such a case, install new batteries
and set the remote control code.

within 6 m (20 ft)

ADVANCED
OPERATION

Take off the battery compartment cover.

30

BASIC
OPERATION

1

3

INTRODUCTION

Installing batteries in the remote
control

English

9 En

Connections
Placing speakers
This unit supports up to 7.1-channel surround. We recommended the following speaker layout in order to obtain the
optimum surround effect.
7.1-channel speaker layout

Speaker channels

C
FR

FL

SW

SW
30˚

SL

SR
60˚
80˚

SL

SR

SBL

SBR

30 cm (12 in) or more

6.1-channel speaker layout
C
FR

FL

SW

SW
30˚

■ Front left and right speakers (FL and FR)
The front speakers are used for the front channel sounds
(stereo sound) and effect sounds. Place these speakers at
an equal distance from the ideal listening position. When
using a screen, the appropriate top positions of the
speakers are about 1/4 of the screen from the bottom.
■ Center speaker (C)
The center speaker is for the center channel sounds
(dialog, vocals, etc.). Place it halfway between the left and
right speakers. When using a TV, place the speaker just
above or just under the center of the TV with the front
surfaces of the TV and the speaker aligned. When using a
screen, place it just under the center of the screen.
■ Surround left and right speakers (SL and SR)
The surround speakers are used for effect and surround
sounds.
Place them at the rear left and rear right facing the
listening position.
To obtain a natural sound flow in the 5.1-channel speaker
layout, place them slightly further back than in the 7.1channel speaker layout.
■

SL

SR
60˚

SL

80˚

SR
SB

5.1-channel speaker layout
C
FR

FL

SW

SW
30˚

SL

SR
60˚

SL

10 En

80˚

SR

Surround back left and right speakers (SBL
and SBR) / Surround back speaker (SB)
The surround back left and right speakers are used for rear
effect sounds. When using the surround back speakers,
connect an external amplifier to the SURROUND BACK
jacks of the PRE OUT terminals. Place them at the rear of
the room facing the listening position at least 30 cm away
from each other, ideally at the same distance as that
between the front left and right speakers.
In the 6.1-channel speaker layout, surround back left and
right channel sound signals are mixed down and output
from the single surround back speaker.
In the 5.1-channel speaker layout, surround back left and
right channel sound signals are output from the surround
left and right speakers.
■ Subwoofer (SW)
The subwoofer speaker is used for bass sounds and lowfrequency effect (LFE) sounds included in Dolby Digital
and DTS signals. Use a subwoofer with a built-in
amplifier, such as the Yamaha Active Servo Processing
Subwoofer System. Place it exterior to the front left and
right speakers facing slightly inward to reduce reflections
from a wall.

Connections

Connecting speakers
When you connect speakers, connect them to the respective terminals as follows, according to your speaker layout.

b

a

DMI 3

HDMI 4

SPEAKERS

FRONT
CENTER

SURROUND

Surround Back L/R speakers

BASIC
OPERATION

External Amplifier
SURROUND BACK

AUDIO
OUT

SUBWOOFER

PRE OUT

d

f

ADVANCED
OPERATION

e
■

SURROUND BACK L
(white)
SURRUND BACK R
(red)

5.1-channel

SURROUND BACK

SUBWOOFER

PRE OUT

Speakers

PREPARATION

Connecting an external amplifier to the SURROUND
BACK L/R jacks of the PRE OUT terminals allows you to
create the maximum of 7.1-channel surround system with
a surround back channel.
For a 6.1-channel system, connect the external amplifier to
the SURROUND BACK L jack of the PRE OUT
terminals.
For a 7.1-channel system, connect it to the SURROUND
BACK L/R jacks.

c

INTRODUCTION

Connecting the surround back speakers

Jacks on this unit
FRONT (L)

b Front speaker R

FRONT (R)

c Center speaker

CENTER

d Surround speaker L

SURROUND (L)

e Surround speaker R

SURROUND (R)

f Subwoofer

SUB WOOFER

You can adjust the surround back speaker volume with a
volume control of the external amplifier. To obtain the
balanced sound during playback, set the speaker output
characteristics in advance using the Yamaha Parametric
Room Acoustic Optimize (YPAO, see page 18) or
“Speaker Setup” of the setup menu (see page 39).

ADDITIONAL
INFORMATION

a Front speaker L

APPENDIX
English

11 En

Connections

Connecting the speaker cable
Caution
• A speaker cable is a pair of insulated cables running side by side in general. One of the cables is colored differently
or striped to indicate a polarity. Connect one end of the colored/striped cable to the “+” (red) terminal of this unit
and the other end to that of your speaker, and connect one end of the other cable to the “–” (black) terminal of this
unit and the other end to that of your speaker.
• Before connecting the speakers, be sure to disconnect the power cable.
• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or
speakers. If the circuit shorts out, “CHECK SP WIRES!” appears on the front panel display when this unit is turned on.
• Use magnetically shielded speakers. If images on the monitor are still distorted even when you use the magnetically
shielded speakers, place the speakers away from the monitor.
• Use speakers with an impedance of 6-ohm or larger. Set speaker impedance in “ADVANCED SETUP” before
connecting the speakers (see page 45).
■

Connecting to the FRONT terminals

1

Remove approximately 10 mm (0.4 in) of
insulation from the end of each speaker
cable and then twist bare wires of the cable
together so that they will not cause a short
circuits.

■

Connecting to the CENTER and SURROUND
terminals

1

Press down the tab and insert the bare end of
the speaker cable into the hole in the
terminal.
Red: positive (+)
Black: negative (–)

10 mm (0.4 in)

2

Loosen the knob, insert the twisted bare
wires into the hole, and then tighten the
knob.

2
Red: positive (+)

1

Black: negative (–)

3
Connecting the banana plug (Except U.K.,
Europe, Asia and Korea models)
Tighten the knob, and then insert the banana plug into
the end of the terminal.
Banana plug

12 En

2

Release the tab to secure the wire.

Connections

Information on jacks and cable plugs

■

■

Audio jacks
Jack and cables

AUDIO jacks
(white)

L

Description

R
(red)

To transmit coaxial digital audio
signals. Use pin cables for digital
audio signals.

(orange)

C

O

To transmit optical digital audio
signals. Use optical fiber cables for
optical digital audio signals.

OPTICAL

HDMI

• We recommend that you use a commercially available 19-pin HDMI
cable no longer than 5 meters (16 feet) with the HDMI logo printed on it.
• You can check the potential problem about the HDMI connection (see
page 23).
• You can check error information on HDMI connections (see page 23).

A video signal input to this unit is output from the
output terminals in MONITOR OUT for the same kind
of signal as the input signal.
For example, if a VCR with a composite output signal
and a DVD player with a COMPONENT VIDEO
output signal are connected, connect both VIDEO jack
and COMPONENT VIDEO jack in MONITOR OUT
to the video monitor.
Input

Video jacks

HDMI

Jack and cables

Output
HDMI

Description
COMPONENT VIDEO

VIDEO jacks
VIDEO

V

ADVANCED
OPERATION

■

HDMI

To transmit digital video and
digital audio signals. Use HDMI
cables.

To transmit conventional
composite video signals. Use video
pin cables.

PR

PB

VIDEO

COMPONENT VIDEO

Y

PR

PB

Y

VIDEO

COMPONENT
VIDEO

PR

PR

ADDITIONAL
INFORMATION

(yellow)

COMPONENT VIDEO
jacks

BASIC
OPERATION

COAXIAL

OPTICAL jacks

HDMI jacks

Description

y

AUDIO

COAXIAL jacks

Jack and cables

PREPARATION

To transmit conventional analog
left and right audio signals. Use
stereo pin cables. Connect red
plugs to red jacks (R) and white
plugs to white jacks (L).

Video/audio jacks

INTRODUCTION

This unit has the following input and output jacks. Use jacks and cables appropriate for components that you are
connecting.

To transmit component video
signals that include luminance (Y),
chrominance blue (PB) and
chrominance red (PR) components.
Use component video cables.

(red)
PB

PB

(blue)

Y

APPENDIX

Y

(green)

English

13 En

Connections

Connecting a TV monitor or projector
Connect a video monitor such as a TV or projector to an output terminal of this unit. You can select one of the following
three types according to the input signal format supported by the video monitor.
Note
• When you connect this unit to the video monitor, make sure that this unit is on standby.

Outputting sound of a TV from this unit

TV, or projector

c

a

To output sound of a TV from this unit, make connection
between the AV input 1-6 and an audio output terminal.
If the TV supports an optical digital output, we
recommend that you use the AV input 1. Connecting to the
AV input 1 allows you to switch an input source to the AV
input 1 with just a single key operation using the SCENE
function (see page 21).

b

Y

HDMI

PB

PR

V

TV, or projector

Digital output
(optical)
(BD/DVD)

HDMI 2

HDMI 1

HDMI OUT

HD

ANTENNA
COMPONENT
VIDEO
UNBAL.

PR

FM

GND AM

UNBAL.

PB

PR
VIDEO

Y

FM

PB

GND AM

VIDEO

MONITOR OUT

Y

■

To connect an HDMI video monitor
Jacks on components

Jacks on this unit

O

OPTICAL

COAXIAL

COAXIAL

AV 2

AV 3

( TV )

AV 1

a HDMI input

HDMI OUT

y
• This unit supports the HDMI control function. By connecting a TV that
supports the HDMI control, operations of this unit can be controlled with
the remote control of the TV. For details, see page 44.

■

To connect component video monitor

Note
• Only video signals input from this unit via the component input terminal
are output from the component output terminal.

Jacks on components
b Component video output

■

Jacks on this unit
MONITOR OUT
(COMPONENT VIDEO)

To connect composite video monitor

Note
• Only video signals input from this unit via the composite video input
terminal are output from the composite video output terminal.

Jacks on components
c Video input (composite)

14 En

Jacks on this unit
MONITOR OUT (VIDEO)

OPTICAL

(CD)

AV 4

AV 5

AV 6

AV
OUT

AUDIO1

Connections

Connecting other components

Note
• When you connect this unit to the external components, make sure that this unit is on standby.
Audio / video input (AV 1-6)

Audio / video output (AV OUT)

PREPARATION

HDMI input
(HDMI 1-4)
(BD/DVD)

DOCK

HDMI 2

HDMI 1

HDMI OUT

HDMI 3

ANTENNA

HDMI 4
FRONT

COMPONENT
VIDEO

COMPONENT
VIDEO

CE

UNBAL.

PR

PR

GND AM

FM

PB

PB
VIDEO

VIDEO

Y

INTRODUCTION

This unit has input and output terminals for respective input and output sources. You can reproduce sound and movies
from input sources selected with the front panel display or remote control.

Y
MONITO OUT
MONITOR

BASIC
OPERATION

Audio output
(AUDIO OUT)
OPTICAL

COAXIAL

COAXIAL

AV 2

AV 3

( TV )

AV 1

OPTICAL

(CD)

AV 4

AV 5

AV
OUT

AV 6

AUDIO1

AUDIO
OUT

AUDIO2

Audio input (AUDIO 1-2)

Audio and video player / Set-top box

ADVANCED
OPERATION

■

Output jacks on the connected external component
External
components
External component
with HDMI output

HDMI output

Optical digital output

Video

Component video

Audio

Coaxial digital output

Video

Component video output

Audio

Coaxial digital output

Video

Composite output

Audio

Optical digital output

Video

Composite output

Audio

Analog audio output

Video

Composite output

Audio

Analog audio output

Video

Composite output

HDMI 1

HDMI 2

HDMI 2

HDMI 3

HDMI 3

HDMI 4

HDMI 4

AV 1 (TV)

OPTICAL
COMPONENT VIDEO

AV 2

COAXIAL
COMPONENT VIDEO

AV 3 (CD)

COAXIAL
VIDEO

AV 4

OPTICAL
VIDEO

AV 5

AUDIO
VIDEO

AV 6

AUDIO
VIDEO

y
• Input sources in parentheses are recommended to connect to the respective jacks. If your Yamaha component has the Remote in/out terminal, you can
switch the input source to that component with a single key operation using the SCENE function (see page 21).
• You can change the name of the input source displayed on the front panel display as necessary (see page 43).

15 En

English

Audio

HDMI 1 (BD/DVD)

APPENDIX

External component
with composite video
output

Audio/Video

Output jacks

ADDITIONAL
INFORMATION

External component
with component video
output

Input sources/jacks of this unit
Signals

Connections

■

Audio player
Output jacks on the connected external component
Input sources/jacks of this unit
External components

Output jacks

External component with optical digital
output

Optical digital output

External component with coaxial digital
output

Coaxial digital output

External component with analog audio
output

Analog audio output

AV 1 (TV)

OPTICAL

AV 4

OPTICAL

AV 2

COAXIAL

AV 3 (CD)

COAXIAL

AV 5

AUDIO

AV 6

AUDIO

AUDIO 1

AUDIO

AUDIO 2

AUDIO

y
• We recommend connecting the coaxial digital output terminal of a CD player to the AV3 jack.

About audio/video output terminals
Among the analog audio and analog video signals input to this unit via input terminals, the audio/video signals of the
selected input sources are output from the AV OUT jack and AUDIO OUT jack. An HDMI input signal,
COMPONENT VIDEO input signal or digital audio input signal cannot be output.
When using the AV OUT jack: connect an external component to the composite or analog audio terminal.
When using the AUDIO OUT jack: connect an external component to the analog audio terminal.

Connecting a Yamaha iPod universal
dock or Bluetooth™ wireless audio
receiver
This unit has the DOCK jack, to which you can connect a
Yamaha iPod universal dock (YDS-11, sold separately) or
a Bluetooth wireless audio receiver (YBA-10, sold
separately). You can play an iPod or a Bluetooth
component with this unit by connecting it to the DOCK
jack.
Use a dedicated cable for connection between the dock/
receiver and this unit.

Using the VIDEO AUX jacks on the
front panel
Use the VIDEO AUX jacks on the front panel to connect a
game console or a video camera to this unit. Be sure to
turn down the volume of this unit and other components
before making connections.
VOLUME

l

PRESET

h

l

AM

FM

TUNING

h

SCENE

BD/DVD

OGRAM

TV

CD

RADIO

STRAIGHT

DIRECT

INPUT

l

h

VIDEO AUX

OPTIMIZER MIC

h

EFFECT
VIDEO

DOCK

AUDIO

PORTABLE

HDMI OUT

ANTENNA
COMPONENT
VIDEO
UNBAL.

VIDEO

L

AUDIO

R

PORTABLE

PR

FM

PB

GND

VIDEO

Y

L

R

Analog audio
output

Analog audio
output

Video output

V

Yamaha iPod universal
dock/Bluetooth wireless
audio receiver
Game console/Camcorder

Music player

Note
• When external components are connected both the PORTABLE jack and
AUDIO jack, sound input from the PORTABLE jack is output.

16 En

Connections

Connecting the FM and AM antennas

After all connections are complete, plug the AC power
cable of this unit into an AC wall outlet.

To the AC wall outlet
Indoor FM antenna

AM loop
antenna

PREPARATION

Outdoor AM antenna
Connect a 5 to 10 m (16
to 33 ft) vinyl-covered
wire, and extend it
outdoors (use the AM
loop antenna together
with this antenna).

Power cable
(BD/DVD)

DOCK

HDMI 2

HDMI 1

HDMI OUT

HDMI 3

ANTENNA

F

COMPONENT
VIDEO

COMPONENT
VIDEO
UNBAL.

PR

PR

FM

PB

GND AM

PB
VIDEO

VIDEO

Y

INTRODUCTION

An indoor FM antenna and an AM loop antenna are
supplied with this unit. Connect these antennas properly to
the respective jacks.

Connecting the power cable

Y
MONITOR OUT

y

1

Press ASTANDBY/ON on the front panel (or
fPOWER on the remote control) to turn on
this unit.

2

Press ASTANDBY/ON (or fPOWER) again
to turn off this unit (standby mode).

y

Assembling the AM loop antenna

Caution
Do not unplug this unit while it is turned on. Doing so
may damage this unit or cause the settings of this unit
to be saved incorrectly.

Press and hold

Insert

APPENDIX

Connecting the AM loop antenna
The wires of the AM loop antenna have no polarity. You
can connect either wire to the AM terminal and the other
to the GND terminal.

ADDITIONAL
INFORMATION

• The unit needs a few seconds until ready to play back.
• You can also turn on this unit by pressing ISCENE (or kSCENE).
• This unit consumes a small amount of electricity even in the standby
mode. We recommend disconnecting the power cable from the AC wall
outlet.

ADVANCED
OPERATION

• The supplied antennas are normally sensitive enough to obtain good
reception.
• Position the AM loop antenna away from this unit.
• If you cannot get good reception, we recommend that you use an outdoor
antenna. For more details, consult the nearest authorized Yamaha dealer
or service center.
• Always use the AM loop antenna even when the outdoor antenna is
connected.

Turning this unit on and off

BASIC
OPERATION

Ground (GND terminal)
The GND terminal is not for earth
grounding.
To reduce noises, connect a ground bar or a
vinyl-covered wire with a copper plate at its
tip, and place it in the moist ground.

Release

English

17 En

Optimizing the speaker setting for your listening room (YPAO)
This unit has a Yamaha Parametric Acoustic Optimizer (YPAO). With the YPAO, this unit automatically adjusts the
output characteristics of your speakers based on speaker position, speaker performance, and the acoustic characteristics
of the room. We recommend that you first adjust the output characteristics with the YPAO when you use this unit.
Caution
• Be advised that it is normal for loud test tones to be
output during the “Auto Setup” procedure. Do not
allow small children to enter the room during the
procedure.
• To achieve the best results, make sure the room is as
quiet as possible while the “Auto Setup” procedure is
in progress. If there is too much ambient noise, the
results may not be satisfactory.

2

Connect the supplied optimizer microphone
to the OPTIMIZER MIC jack on the front
panel.
UT

VIDEO AUX

OPTIMIZER MIC

h

VIDEO

AUDIO

PORTABLE

y
• See page 39 for the “Manual Setup” procedure.
Optimizer microphone

Using Auto Setup
1

Check the following points.
Before starting the automatic setup, check the
following.
• All speakers and subwoofer are connected
properly.
• Headphones are disconnected from this unit.
• If the surround back speakers are connected to this
unit via an external amplifier, turn on the external
amplifier and adjust the volume to the proper level.
• The connected subwoofer is turned on and the
volume level is set to about half way (or slightly
less).
• The crossover frequency controls of the connected
subwoofer are set to the maximum.

MAX

MIN

• You can bring up the “Auto Setup” from the setup menu (see page 39).

3

Place the optimizer microphone at your
normal listening position on a flat level
surface with the omni-directional
microphone heading upward.
Optimizer microphone

MAX

Subwoofer

Note
• If the volume of the external amplifier is not set at the proper level
while the surround speakers being connected, the surround back
speakers may not be recognized by the YPAO or a warning
message may appear.

18 En

y

CROSSOVER/
HIGH CUT

VOLUME

MIN

“MIC ON. YPAO START” appears on the front panel
display.

y
• It is recommended that you use a tripod or something similar to fix the
optimizer microphone at the same height as your ears would be when
seated in your listening position. You can fix the optimizer microphone to
the tripod with the attaching screw of the tripod.

Optimizing the speaker setting for your listening room (YPAO)

4

>SetCancel
7

To cancel the operation, press nCursor l /
h to select “Cancel” and press nENTER.
When “Disconnect MIC” appears, remove the
optimizer microphone. Auto Setup is complete.

The optimizer microphone is sensitive to heat. Store it
in a cool place and away from direct sunlight after
measurement. Do not leave it in a place where it will be
subjected to high temperatures such on an AV
component.
y
• If you do not want to apply the measurement results, select “Cancel.”
• Perform “Auto Setup” again if you change the number or positions of
speakers.
• If you press nENTER before removing the optimizer microphone,
“1 Auto Setup” of “Speaker Setup” in the setup menu (see page 39) is
displayed.

ADVANCED
OPERATION
ADDITIONAL
INFORMATION

Press nCursor n to select “Start” and then
press nENTER to start the setup procedure.
A countdown starts and a measurement starts in 10
seconds. A loud test tone is output during
measurement.

Press nENTER to confirm the settings.
The speaker characteristics are adjusted according to
measurement results.

BASIC
OPERATION

Natural
This adjusts all speakers to achieve natural sound.
Select this if sounds in the high frequency range seem
too strong when “EQ” is set to “Flat.”
Flat
This adjusts each speaker to obtain the same
characteristics. Select this if your speakers have
similar qualities.
Front
This adjusts each speaker to obtain the same
characteristics as the front left and right speakers.
Select this if your front left and right speakers have
significantly better qualities than the other speakers.

6

PREPARATION

This unit has a parametric equalizer that adjusts the
output levels for each frequency range. The equalizer
is adjusted to produce a cohesive sound field based on
automatically measured speaker characteristics.
In “EQ,” you can select the following parametric
equalizer characteristics suitable for the desired
sound characteristics.

• When “E-xx” (xx indicates the number) appears during Auto
Setup, it means that measurement is canceled due to an error. For
details, see “When an error message is displayed during
measurement” (page 20).
• When an error occurs during measurement, “W-xx” (xx indicates
the number) appears. For details, see “When a warning message is
displayed after measurement” (page 20).

INTRODUCTION

EQ;;;;;Natural

5

Notes

To select a sound character for adjustment,
press nCursor k to select “EQ” and then
press nCursor l / h.
If this unit does not work when you press nCursor,
press lSETUP once and then operate this unit.

Notes
• During the automatic setup procedure, do not perform any
operation on this unit.
• Press nCursor k to cancel the automatic setup procedure.

Measurement takes about 3 minutes. To obtain precise
results, stay where you will not disturb the
measurement, such as to the side of or behind the
speakers or outside the room.
APPENDIX

When measurement is successfully completed,
“YPAO Complete” appears on the front panel display.

YPAOComplete
English

19 En

Optimizing the speaker setting for your listening room (YPAO)

When an error message is displayed
during measurement
Select “Retry” or “Exit” using nCursor l / h
and then press nENTER.

When a warning message is displayed
after measurement
If a problem occurs during measurement, “W-xx” (xx
indicates the number) is displayed on the front panel
display. Check the error and solve the problems.

Retry
Performs “Auto Setup” again.

W-1:PHASE

Exit
Terminates the measurement and “Auto Setup.”
y
• See page 51 for details on error messages.
• When “E-5:NOISY” appears, you can continue measurement. To
continue measurement, select “Proceed.” However, we recommend that
you solve the problem first and then perform measurement again.

20 En

y
• See page 52 for details on warning messages.
• Optimization will not be performed while a warning message is
displayed. We recommend that you solve the problem and perform “Auto
Setup” again.

1

If a warning message is displayed, press
nENTER.
Details of the warning message are displayed. If there
are multiple warning messages, you can display the
next message using nCursor h.

2

To return to the top result display, press
nENTER again.

BASIC OPERATION
Playback
Using the SCENE function

Turn on external components (TV, DVD
player, etc.) connected to this unit.

2

Press NINPUT l / h (or gInput
selection keys) to select an input source.
The name of the selected input source is displayed for
a few seconds.
Input source name
VOL.

AV1

This unit has a SCENE function that allows you to change
input sources and sound field programs with one key. Four
scenes are available for different usages, such as playing
movies or music. The following input sources and sound
field programs are provided as the initial factory settings.
Input source

Sound field program

BD/DVD

HDMI 1

Straight

TV

AV 1

Straight

CD

AV 3

Straight

RADIO

TUNER

7ch Enhancer

3

Turn the PVOLUME control to adjust the
volume (or press oVOLUME +/–).

Press ISCENE (or kSCENE).

Registering input source/sound field
program
Select the desired input source/sound field
program, and pressing down ISCENE (or
kSCENE) until “SET Complete” appears on the
front panel display.

Switching remotely controlled external
components linked to scene selections

VOL.

Volume-18.5dB

Selecting a SCENE

L
SL

SW
C

R
SR

Note
When you play back a DTS-CD, noise may be output in some
conditions, which may cause a speaker malfunction. Make sure
that the volume is set to low before starting playback. If noise is
output, do the following.

1

Register the remote control code of an
external component to the desired input
source (see page 44).
Note

APPENDIX

1) When only noise is output
If a DTS bitstream signal is not properly input to this unit,
only noise is output. Connect the playback component to this
unit by digital connection and play back the DTS-CD. If the
condition is not improved, the problem may results from the
playback component. Consult the manufacturer of the
playback component.

You can operate an external component with the remote
control of this unit by setting a remote control code for the
external component for each input source. Setting remote
control codes for desired input sources allows you to
switch between external components linked to scene
selections.

ADDITIONAL
INFORMATION

Volume

• When this unit is on standby, you can turn on this unit by pressing the
SCENE key.

ADVANCED
OPERATION

4

Play the external component that you have
selected as the source input, or select a radio
station on the tuner.
Refer to the operating instructions of the external
component for details on playback. For selecting
radio stations or playback of an iPod or Bluetooth
component using this unit, see the following.
• FM/AM radio tuning (see page 28)
• Bluetooth component playback (see page 32)
• iPod playback (see page 30)

BASIC
OPERATION

y

PREPARATION

1

INTRODUCTION

Basic procedure

• Remote control codes cannot be registered to a TUNER input.

English

2) When noise is output during playback or skip operation
Before playing back the DTS-CD, display the option menu
after selecting the input source and set “Decoder Mode” to
“DTS” (see page 33).

21 En

Playback

2

Press gInput selection keys on the
remote control for the input source whose
remote control code was registered in step 1
for about 3 seconds while pressing down
kSCENE key whose assignment you want
to change.
The external component can now be controlled
remotely just by selecting a scene.

Muting audio output temporarily
(MUTE)
1

2

Press qMUTE on the remote control to mute
the audio output.
The MUTE indicator on the front panel display
flashes while audio output is muted.

Enjoying pure hi-fi sound
Use Direct mode to enjoy the pure high fidelity sound of
the selected source. When Direct mode is activated, this
unit plays back the selected source with the least circuitry.
Press MDIRECT (or jDIRECT) to turn the
Direct mode on or off.
The following features are disabled in Direct mode.
– sound field program, tone control
– display and operation of the option menu and setup
menu
y
• While direct mode is on, the front panel display becomes dim. When
setting it back off, the brightness of the front panel display returns to the
previous setting.

Using the sleep timer

Press qMUTE again to resume audio
output.

The sleep timer is useful if you want to go to sleep while
this unit is playing or recording a source.

Adjusting high/low frequency sound
(tone control)

Press eSLEEP repeatedly to set the amount of
time.
Each time you press eSLEEP, the front panel display
changes as shown below.

You can adjust the balance of the high frequency range
(Treble) and low frequency range (Bass) of sounds output
from the front left and right speakers to obtain desired
tone.

1

Press JTONE CONTROL on the front panel
repeatedly to select “Treble” or “Bass.”
The current setting is displayed on the front panel
display.

Sleep 120min.
Sleep Off

Sleep 90min.

Sleep 30min.

Sleep 60min.

When the sleep timer is set, the SLEEP indicator on the
front panel display lights up.
Press eSLEEP on the remote control repeatedly until
“Sleep Off” appears on the front panel display.

Using your headphones

Treble
2

0.0dB

Adjust the frequency range using
KPROGRAM l / h.
Control range: –10.0 dB to +10.0 dB
The display returns the previous screen soon after you
release the key.

Notes
• The tone control settings are not effective during playback in direct
mode.
• If you set the balance extremely off, sounds may not match those from
other channels well.

22 En

Plug your headphones in the BPHONES jack on
the front panel.
When you select a sound field program while using the
headphones, the mode is automatically set to SILENT
CINEMA mode.
Notes
• When you connect headphones, no signals are output at the speaker
terminals.
• When multi-channel signals are processed, sounds in all channels are
divided to left and right channels.

Playback

Displaying input signal information

Select the desired input source, and press
mOPTION.
The option menu for the selected input source is
displayed (see page 33).

2

Press nCursor k / n to select “Signal Info,”
and press nENTER.
Information on input signals is displayed. See
page 34 on messages displayed on the front panel
display.

3

Press nCursor k / n to select the desired
item.

Note
• If an HDMI related error occurs, when an HDMI related error has
occurred, press nCursor to display an error message.

To end the information display, press
mOPTION.

Straight
Sound field program (DSP program)

The following information is displayed for each input
source.
HDMI1-4:
AV1-6:
AUDIO1-2:
V-AUX:
FM/AM:

Input, DSP Program, Audio Decoder
Input, DSP Program, Audio Decoder
Input, DSP Program, Audio Decoder
Input, DSP Program, Audio Decoder
Frequency, DSP Program, Audio
Decoder
iPod (Simple remote mode): Input, DSP Program, Audio Decoder
iPod (Menu browse mode): (in PlayInfo displayed) Artist, Album,
Song, DSP Program, Audio Decoder
(in Play menu displayed) List
Bluetooth:
Input, DSP Program, Audio Decoder

ADVANCED
OPERATION

4

Input source

BASIC
OPERATION

DolbyD

PREPARATION

1

Information displayed on the front panel display can be
changed by pressing CINFO (or iINFO).
The following information can be displayed according to
the input source.
For example, if you select HDMI1 input and display “DSP
Program,” the following screen appears on the front panel
display.

INTRODUCTION

You can display information on audio/video signals input
to this unit for each input source.

Changing information on the front
panel display

ADDITIONAL
INFORMATION
APPENDIX
English

23 En

Enjoy the sound field programs
This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel sounds
for almost all input sources using various sound field programs stored on the chip and a variety of surround decoders.

Selecting sound field programs
■ Selecting a sound field program on the front panel
Press KPROGRAM l / h repeatedly to select a desired sound field program.
■ Selecting a sound field program with the remote control
Perform the following operations depending on the category of the sound field programs.
Sound field programs for movies/TV programs ...............................Press jMOVIE repeatedly.
Sound field programs for music........................................................Press jMUSIC repeatedly.
Stereo reproduction ...........................................................................Press jSTEREO repeatedly.
Multi-channel stereo reproduction ....................................................Press jSTEREO repeatedly.
Compressed music enhancer.............................................................Press jSTEREO repeatedly.
Surround decoder ..............................................................................Press jSUR.DECODE repeatedly.
For example, if you select “Sci-Fi” in “movie/TV program,” the following screen appears on the front panel display.
Sound field program category

Sci-Fi
Program name

Notes
• Sound field programs are stored for each input source. When you change the input source, the sound field program previously selected for that input
source is applied again.
• When you play back the Dolby Digital Plus, Dolby TrueHD, DTS Express, DTS-HD Master Audio, or DTS-HD High Resolution Audio sources, this unit
does not apply any sound field program other than the surround decoder and they are played back in straight decode mode.
• If the sampling frequency of an input source is higher than 96 kHz, this unit does not apply any sound field programs.

Sound field program descriptions
This unit provides sound field programs for multiple categories including music, movies and stereo reproduction. Select
a sound field program based on your listening preference, not merely on the name of the program, etc.
y
• You can check what speakers are currently outputting signals with the speaker indicators on the front panel display (see page 6).
• Each program can adjust sound field elements (sound field parameters). For details, see page 36.
•
in the table indicates the sound field program with CINEMA DSP.

For movie/TV program sources
Program

Descriptions

Standard

This program creates a sound field emphasizing the surrounding feeling without disturbing the original acoustic
positioning of multi-channel audio such as Dolby Digital and DTS. It has been designed with the concept of “an
ideal movie theater,” in which the audience is surrounded by beautiful reverberations from the left, right and rear.

Spectacle

This program represents the spectacular feeling of large-scale movie productions.
It reproduces a broad theater sound field matching the cinemascope and wider-screen movies with an excellent
dynamic range from very small to extremely large sound.

Sci-Fi

This program clearly reproduces the finely elaborated sound design of the latest science fiction and special effectsfeaturing movies.
You can enjoy a variety of cinematographically created virtual spaces reproduced with clear separation between
dialog, sound effects and background music.

Adventure

This program is ideal for precisely reproducing the sound design of action and adventure movies.
The sound field restrains reverberations but puts emphasis on reproducing a powerful space expanded widely to
the left and right. The reproduced depth is also restrained relatively to ensure the separation between audio
channels and the clarity of the sound.

24 En

Enjoy the sound field programs

Program

Descriptions

This program is provided for reproducing monaural video sources such as a classic movie in an atmosphere of a
good old movie theater.
The program produces the optimum expansion and reverberation to the original audio to create a comfortable
space with a certain sound depth.

Sports

This program allows the listeners to enjoy stereo sport broadcasts and studio variety programs with enriched live
feeling. In sports broadcasts, the voices of the commentator and sportscaster are positioned clearly at the center
while the atmosphere of the stadium expands in an optimum space to offer the listeners with a feeling of presence
in the stadium.

Action Game

This sound field has been suitable for action games such as car racing and FPS games. It uses the reflection data
that limits the effects range per channel in order to offer a powerful playing environment with a being-there feeling
by enhancing various effects tones while maintaining a clear sense of directions.

Roleplaying Game

This sound field has been suitable for role-playing and adventure games. It combines the sound field effects for
movies and the sound field designs for “Action Game” to represent the depth and 3D feeling of the field during
play, while offering movie-like surround effects in the movie scenes in the game.

For audio music sources
Program

Descriptions

This is an approximately 1700-seated, middle-sized concert hall with a shoebox shape that is traditional in Vienna.
Pillars and ornate carvings create extremely complex reflections from all around the audience, producing a very
full, rich sound.

Chamber

This program creates a relatively wide space with a high ceiling like an audience hall in a palace. It offers pleasant
reverberations that are suitable for courtly music and chamber music.

Cellar Club

This program simulates a live house with a low ceiling and homey atmosphere. A realistic, live sound field
features powerful sound as if the listener is in a row in front of a small stage.

The Roxy Theatre

This is the sound field of a rock music live house in Los Angeles, with approximately 460 seats. The listener’s
virtual seat is at the center left of the hall.

The Bottom Line

This is the sound field at stage front in The Bottom Line, that was a famous New York jazz club once. The floor
can seat 300 people to the left and right in a sound field offering real and vibrant sound.

Music Video

This sound field offers an image of a concert hall for live performance of pop, rock and jazz music. The listener
can indulge oneself in a hot live space thanks to the presence sound field that emphasizes the vividness of vocals
and solo play and the beat of rhythm instruments, and to the surround sound field that reproduces the space of a
big live hall.

For stereo reproduction

2ch Stereo

APPENDIX

Hall in Vienna

ADDITIONAL
INFORMATION

This sound field simulates a concert hall with approximately 2500 seats in Munich, using stylish wood for the
interior finishing as normal standards for European concert halls. Fine, beautiful reverberations spread richly,
creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena.

ADVANCED
OPERATION

Hall in Munich

Program

BASIC
OPERATION

Mono Movie

PREPARATION

This sound field features stable reverberations that match a wide range of movie genres from serious dramas to
musicals and comedies. The reverberations are modest but offer an optimum 3D feeling, reproducing effects tones
and background music softly but cubically around clear words and center positioning in a way that does not fatigue
the listener even after long hours of viewing.

INTRODUCTION

Drama

Descriptions
Use this program to mix down multi-channel sources to 2 channels.

• When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2 channels and output from the front left and right speakers.

25 En

English

y

Enjoy the sound field programs

For Multi-channel stereo reproduction
Program
7ch Stereo

Descriptions
Use this program to output sound from all speakers. When you play back multi-channel sources, this unit
downmixes the source to 2 channels, and then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties, etc.

The Compressed Music Enhancer
Program

Descriptions

Straight Enhancer

Use this program to enhance the sound nearest to the original depth and width of the 2-channel or multi-channel
compression artifacts.

7ch Enhancer

Use this program to play back compression artifacts in 7-channel stereo.

Surround decode mode
Select this program to playback sources with selected decoders. You can playback 2-channel sources on multi-channels.
Decoder

Descriptions

Pro Logic

Dolby Pro Logic decoder suitable for all kinds of sources.

PLIIx Movie /
PLII Movie

Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder suitable for movies. If your listening environment is as follows, you cannot select the Dolby Pro Logic IIx decoder.
• When the surround back speakers are not connected
• When headphones are connected

PLIIx Music /
PLII Music

Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder suitable for music. If your listening environment is as follows, you cannot select the Dolby Pro Logic IIx decoder.
• When the surround back speakers are not connected
• When headphones are connected

PLIIx Game /
PLII Game

Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder suitable for games. If your listening environment is as follows, you cannot select the Dolby Pro Logic IIx decoder.
• When the surround back speakers are not connected
• When headphones are connected

Neo:6 Cinema

DTS decoder suitable for movies.

Neo:6 Music

DTS decoder suitable for music.

y
• An input source is played back in straight decode mode (see page 27) when multi-channel audio signal is input.

26 En

Enjoy the sound field programs

Enjoying unprocessed input sources
(Straight decoding mode)

To enable straight decoding mode, press
LSTRAIGHT (or jSTRAIGHT).
“Straight” appears on the front panel display.

2

To cancel straight decoding mode, press
LSTRAIGHT (or jSTRAIGHT) again.
A sound field program name appears on the front
panel display, and sound is reproduced with that
sound field effect.

Note
• SILENT CINEMA mode is not available in the following conditions.
– 2ch Stereo of the sound field program is selected.
– direct mode or straight decoding mode is selected.

PREPARATION

1

SILENT CINEMA allows you to enjoy multi-channel
sources with your headphones. SILENT CINEMA mode
is automatically selected when you connect the headphone
plug to the PHONES jack.

INTRODUCTION

In straight decoding mode, sounds are reproduced without
sound field effect. 2-channel stereo sources are output
from only the front left and right speakers. Multi-channel
input sources are decoded straight into the appropriate
channels and multi-channel sounds are reproduced
without a sound field effect.

Enjoy sound field programs with
headphones (SILENT CINEMA™)

BASIC
OPERATION

Enjoying sound field programs without
surround speakers (Virtual CINEMA
DSP)

ADVANCED
OPERATION

Virtual CINEMA DSP allows you to enjoy DSP sound
field surround effects even without any surround speakers
by using virtual surround speakers. You can even enjoy
Virtual CINEMA DSP using a minimal two-speaker
system that does not include a center speaker.
When “Sur. L/R” in the setup menu is set to “None” (see
page 40), this unit operates in Virtual CINEMA DSP
mode.
Note

ADDITIONAL
INFORMATION

• Virtual CINEMA DSP is not available in the following conditions even if
you set “Sur. L/R” to “None” (see page 40).
– headphone plug is connected to the PHONES jack.
– 7ch Stereo of the field sound program is selected.
– direct mode or straight decoding mode is used.

APPENDIX
English

27 En

FM/AM tuning
The FM/AM tuner of this unit provides the following two
modes for tuning.
■

Frequency tuning mode (Auto tuning /
Manual tuning)
You can tune in to a desired FM/AM station by searching
or specifying its frequency.

y
• You can switch between stereo and monaural for FM broadcast in the
option menu (see page 34).

4

■ Preset tuning mode (Preset tuning)
You can preset the frequencies of FM/AM stations by
registering them to specific numbers, and later just select
those numbers to tune in.

Note
• “Wrong Station!” appears on the front panel display when you
enter a frequency that is out of receivable range. Make sure that the
entered frequency is correct.

Note
• Adjust the FM/AM antennas connected to this unit for the best reception.

Tuning in to the desired FM/AM station
(Frequency tuning)
1

Press NINPUT l / h (or gTUNER)
repeatedly and switch the input source to
“TUNER.”

2

Press FFM (hFM) or GAM (hAM) to select
a band.
“FM” or “AM” appears on the front panel display
according to the band that you have selected.

3

Press HTUNING l / h (or hTUNING k /
n) to specify the frequency.
To adjust the frequency to a higher range, press h (or
k). To adjust it to the lower range, press l (or n).
The TUNED indicator on the front panel display
lights up when the tuner is tuned in to a station. The
STEREO indicator also lights up if the program being
broadcasted is in stereo.
STEREO
TUNED

To tune in by direct frequency tuning, enter
the frequency of the desired station using
the numeric keys on the remote control.
Enter only integers. For example, if you want to set
the frequency to 88.9 MHz, enter “889” using
sNumeric keys.

Registering FM/AM stations and
tuning in (Preset tuning)
You can register up to 40 FM/AM stations (Preset) using
“Automatic station preset” or “Manual station preset.”

Registering stations by automatic station
preset
The tuner automatically detects FM stations with strong
signals and registers up to 40 stations. AM stations cannot
be automatically registered. Use manual station preset.

1

Press NINPUT l / h repeatedly (or press
gTUNER) to switch the input source to
“TUNER.”

2

Press mOPTION on the remote control.
The option menu screen for setting options of tuner
input appears on the front panel display.
y
• For details on the option menu, see page 33.

3

Select “Auto Preset,” and press nENTER.

FM92.5MHz
The frequency changes in the following manner according
to how you press HTUNING l / h (or hTUNING k
/ n).
When you press the key more than 1 second.
The tuner searches the frequency of a station that is
detectable around the current frequency. This is effective
when the tuner can receive strong signals without any
interference. Once the search starts, release the key.
When you keep holding the key, the search continues even
when a station is detected. This is useful when you want to
tune in to a specific station.
When you press and release the key
The tuner increases or decreases the frequency in steps.
Use this method when the tuner cannot receive strong
signals and stations are skipped during the search. You can
listen to better quality sound even when the tuner cannot
receive a strong signal.

28 En

Auto Preset
Automatic station preset starts about 5 seconds later
from the lowest frequency upwards.
y
• You can select the preset number at which the preset starts by
pressing hPRESET k / n or nCursor k / n while the front
panel display is in the state as shown in the below figure.
• To cancel registration, press nRETURN on the remote control.
Status

01:FM87.5MHz
Preset number

Frequency

FM/AM tuning

Registering stations by manual station
preset

1

2

Tune in to a station referring to “Tuning in to
the desired FM/AM station (Frequency
tuning)” (see page 28).

Press EPRESET l / h (or hPRESET k / n) to
select a preset number.
y
• Preset numbers to which no stations are registered will be skipped.
• When “No Presets” or “No Presets in Memory” is displayed it means that
no stations are registered. See page 28 and register stations.
• You can directly select a preset number by pressing a sNumeric
keys while calling a preset station. “Empty” appears on the display if
you enter a preset number to which no station is registered. “Wrong
Num.” appears if you enter an invalid number.

Clearing the preset station

1

Press NINPUT l / h repeatedly (or press
gTUNER) to switch the input source to
“TUNER.”

2

Press mOPTION on the remote control.
The option menu screen for setting options of tuner
input appears on the front panel display.

3

Display “Clear Preset” using the nCursor k
/ n and press nENTER.
The following screen appears on the display.

y

• By pressing down DMEMORY (or hMEMORY) for more
than 2 seconds, you can skip step 3 and register the preset number
to be one higher than the last preset number.

3

01:FM92.5MHz
Preset number of the registered station you want to clear.

y

4

Flashing
Preset
number

Empty (or frequency that is currently
registered to the preset number)

y

Select the preset number of the registered
station you want to clear using the nCursor
k / n and press nENTER.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat the above steps.
To end the operation, press mOPTION.

ADDITIONAL
INFORMATION

• You can cancel the operation and return to the option menu screen
by pressing nRETURN on the remote control.

New registered frequency

01:Empty

ADVANCED
OPERATION

Press EPRESET l / h (or hPRESET k / n)
on the remote control to select the preset
number to which the station will be
registered.
When you select a preset number to which no station
is registered, “Empty” appears on the display. When
you select a registered preset number, a registered
frequency is displayed on the right of the preset
number.

BASIC
OPERATION

Press DMEMORY (or hMEMORY).
“Manual Preset” appears on the front panel display,
followed soon by the preset number to which the
station will be registered.

You can call preset stations registered by automatic station
preset or manual station preset.

PREPARATION

You can manually register AM stations or FM stations
with weak signals.

Calling a preset station (Preset tuning)

INTRODUCTION

During the automatic station preset, the upper area of
the screen changes as follows: READY → SEARCH
→ MEMORY each time a station is registered.
When registration is complete, “FINISH” appears
and the option menu screen automatically reappears.
When you press mOPTION on the remote control,
the screen returns to the original state.

• You can select a preset number using the sNumeric keys.

APPENDIX

4

Press DMEMORY (or hMEMORY) again to
register.
When registration is complete, the screen returns to
the original state.
To end the operation, press mOPTION.
y
• To cancel registration, press nRETURN on the remote control
or leave the tuner without any operations for about 30 seconds.

English

29 En

Using iPod™
Once you have stationed your iPod in a Yamaha iPod universal dock (such as the YDS-11, sold separately) connected to
the DOCK terminal on the rear panel of this unit (see page 16), you can enjoy playback of your iPod using the supplied
remote control. You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the
compression artifacts (such as MP3 format) stored on your iPod (see page 24).
Notes
• iPod touch, iPod (Click and Wheel including iPod classic), iPod nano, and iPod mini are supported.
• Some features may not be compatible depending on the model or the software version of your iPod.
• Some features may not be available depending on the model of Yamaha iPod universal dock. The following sections describe the procedure when using
the YDS-11.

y
• Once the connection between your iPod and this unit is complete, “iPod connected” appears on the front panel display.
• For a complete list of status messages that appear on the front panel display, see the “iPod” section on page 50.

1

Controlling iPod™
You can control your iPod when you set it in the iPod
universal dock and switch the input source to DOCK. The
operations of your iPod can be done with the aid of the
front panel display (menu browse mode) or without it
(simple remote mode).
When you connect your iPod to this unit, you can perform
the following operations with the remote control.
Key
ENTER

n

r

p

VOL.

Music

Function

L
SL

SW
C

R
SR

Subsequent menu

k

Menu up

n

Menu down

l

Previous menu

h

Subsequent menu

w

Search backward (Press and hold)

f

Search forward (Press and hold)

a

Skip forward

b

Skip backward

2

Press nCursor k / n / l / h to select a
menu item and then nENTER to start
playback.
The following menu items are available.
Playlists, Artists, Albums, Songs, Genres, Composers
• Playlists > Songs
• Artists > Albums > Songs
• Albums > Songs
• Songs
• Genres > Artists > Albums > Songs
• Composers > Albums > Songs

s

Stop

y

e

Pause (Menu browse mode)
Play/Pause (Simple remote mode)

• You can change information screens on the front panel display
using CINFO (or iINFO) (see page 23). Items displayed on the
front panel display vary depending on mode that is currently
selected.

p

Play (Menu browse mode)
Play/Pause (Simple remote mode)

DISPLAY

Switch between Menu browse mode and
Simple remote mode

y
• You can directly operate your iPod while it is connected to this unit.

30 En

Change the input source to “iPod (DOCK)”
using NINPUT l / h (or gDOCK).
Press pDISPLAY on the remote control to change
between menu browse mode and simple remote
mode, as required.
When you select menu browse mode, the front panel
display changes as follows.

Using iPod™

Shuffle/repeat playback

2

Press mOPTION.
The option menu is displayed.

3

Press nCursor k / n to select the desired
playback function, Shuffle or Repeat, then
press nENTER.
The following playback styles are available
depending on the playback function selected.

BASIC
OPERATION

Press pDISPLAY to switch to menu browse
mode while “DOCK” is selected as the input
source.
The option menu can be displayed only in menu
browse mode. Press pDISPLAY to switch to menu
browse mode before starting shuffle or repeat
playback.

PREPARATION

1

INTRODUCTION

You can use a special playback function such as shuffle
playback and repeat playback by setting the option menu.

ADVANCED
OPERATION

Shuffle: Plays back songs or albums in random
order (Choices: Off, Songs, Albums).
• Select “Off” if you do not want to play back in
random order.
• Select “Songs” to play back songs in random order.
• Select “Albums” to play back albums in random
order.

4

ADDITIONAL
INFORMATION

Repeat: Plays back songs or albums repeatedly
(Choices: Off, One, All).
• Select “Off” if you do not want to play back
repeatedly.
• Select “One” to repeat each song.
• Select “All” to repeat all songs.
Select the desired style using nCursor l /
h.
The style is selected. Playback starts with the
function selected in step 3.
To return to the previous screen, press nRETURN.
To return to the previous playback function, redo the
above steps.

APPENDIX
English

31 En

Using Bluetooth™ components
You can connect a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of
this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without
wiring between this unit and the Bluetooth component. You need to perform “Pairing” the connected Bluetooth wireless
audio receiver and your Bluetooth component in advance.
Note
• This unit supports A2DP (Advanced Audio Distribution Profile) of the Bluetooth profile.

Pairing the Bluetooth™ wireless audio
receiver and your Bluetooth
component
“Pairing” refers to the operation of registering a Bluetooth
component for Bluetooth communications. Pairing must
be performed when using a Bluetooth component with the
Bluetooth wireless audio receiver connected to this unit
for the first time or if the pairing data has been deleted.
y
• You only need the pairing operation for the first time that you use the
Bluetooth component with the Bluetooth wireless audio receiver.
• Pairing requires operations on this unit and on the other component with
which Bluetooth communications are to be established. If necessary,
refer to the other component’s operating instructions.

6

Select the Bluetooth wireless audio receiver
from the Bluetooth device list, and enter a
path key “0000” into the Bluetooth
component.
When pairing is complete, “Completed” appears on
the front panel display.

y
• The Yamaha Bluetooth wireless audio receiver can be paired with up to
eight Bluetooth components. When pairing is conducted successfully
with a ninth component and the pairing data is registered, the pairing data
for the least recently used other component is cleared.

Playback of the Bluetooth™
component

Pairing the Bluetooth™ wireless audio
receiver and your Bluetooth™ component

1

Change the input source to “DOCK” using
NINPUT l / h (or gDOCK).

To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.

2

Press mOPTION.

3

Press nCursor n repeatedly to select
“Connect” and press nENTER.
After you execute “Connect,” communication with
the Bluetooth component is established. When the
connected Bluetooth wireless audio receiver
recognizes the Bluetooth component, “BT
Connected” appears on the front panel display.

■

1

Change the input source to “DOCK” using
NINPUT l / h (or gDOCK).

2

Turn on the Bluetooth component you want
to pair with and set it to pairing mode.
For details on operation of the Bluetooth component,
refer to its operating instructions.

3

Press mOPTION.
The option menu for DOCK input appears on the
front panel display.

4

Press nCursor n to select “Pairing” and
press nENTER.
“Searching” appears on the front panel display and
the pairing operation starts.
y
• To cancel pairing, press nRETURN.
• You can also start pairing operation by pressing and holding
DMEMORY on the front panel.

5

Make sure the Bluetooth component
recognizes the Bluetooth wireless audio
receiver.
If the Bluetooth have recognized the Bluetooth
wireless audio receiver, “YBA-10 YAMAHA,” for
instance, is displayed in the Bluetooth device list.

32 En

y
• When you press nENTER on the remote control, the connected
Bluetooth wireless audio receiver searches and connects to the last
connected Bluetooth component. If the Bluetooth wireless audio
receiver cannot find the Bluetooth component, “Not found”
appears on the front panel display.
• To disconnect the Bluetooth wireless audio receiver from the
Bluetooth component, display the option menu again, select
“Disconnect,” and press nENTER.

4

Start playback of the Bluetooth component.

ADVANCED OPERATION
Setting the option menu for each input source (OPTION menu)
Select an input source using NINPUT l / h
(or gInput selection keys).

2

Press mOPTION on the remote control.
The OPTION menu appears. The displayed OPTION
menu items differ depending on the input source. For
details, see the following section.

Menu item
Volume
Trim

Decoder
Mode

EXTD
Surround

Signal Info

AV1-4

Volume
Trim

Decoder
Mode

EXTD
Surround

Signal Info

AV5-6

Volume
Trim

AUDIO1-2

Volume
Trim

Change the setting of the selected menu item
(or enable a function) using nCursor k / n /
l / h and nENTER.
Details of the selected menu item are displayed.
Parameters you can set differ depending on the menu
items.

V-AUX

Volume
Trim

TUNER

Volume
Trim

FM Mode

Auto
Preset

Clear
Preset

iPod
(DOCK)

Volume
Trim

Shuffle

Repeat

To close the OPTION menu, press
mOPTION.
You can also use nRETURN to return to the
previous screen or close the OPTION menu.

Bluetooth
(DOCK)

Volume
Trim

Connect/
Disconnect

Pairing

Details of the menu items are as follows:

y

y

Select the desired menu item using
nCursor k / n, and press nENTER.
Parameters of the selected menu item are displayed.

• The default settings are marked with “*.”

■

Volume Trim

Input source:
All
Adjustable range: -6.0 dB to 0.0 dB* to +6.0 dB
(in 0.5 dB steps)

Reduces any change in volume when switching input
sources by correcting volume differences between input
sources.
You can set this parameter for each input source.

ADDITIONAL
INFORMATION

• When nCursor or other keys do not work after completing the
menu, select the input source again using gInput selection
keys.

ADVANCED
OPERATION

5

Input
Source

BASIC
OPERATION

4

The following menu items are provided for each input
source.

HDMI1-4

VolumeTrim
3

OPTION menu items

PREPARATION

1

INTRODUCTION

This unit has an OPTION menu of frequently used menu items for input sources compatible with this unit. The procedure
for setting the OPTION menu items is described below.

APPENDIX
English

33 En

Setting the option menu for each input source (OPTION menu)

■

Decoder Mode

Input source: HDMI1-4, AV1-4
Choices:
Auto*/DTS

Selects DTS digital audio signals for reproduction.
Auto
DTS
■

Automatically selects audio input signals.
Selects DTS signals only. Other input signals
are not reproduced.

EXTD Surround

Signal Info
Input source: HDMI1-4, AV1-4

Displays information on audio and video signals on the
front panel display. You can change items to be displayed
using nCursor k / n.

Signal Info parameters
■

Input source: HDMI1-4, AV1-4
Choices:
Auto*/PLIIxMovie/PLIIxMusic/EX/ES/
Off

Audio information
Information

Format of digital audio signals.

Selects whether to reproduce multi-channel input signals
in 6.1- or 7.1-channel when surround back speakers are
used.
Auto

PLIIx
Movie

PLIIx
Music

EX/ES

Off

Automatically selects the most suitable
decoder according to whether a flag for
reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1channel.
Always reproduces signals in 6.1- or 7.1channel using the PLIIxMovie decoder
whether or not surround back channel signals
are contained. You can select this parameter
when one or two speakers are connected.
Always reproduces signals in 6.1- or 7.1channel using the PLIIxMusic decoder whether
or not surround back channel signals are
contained. You can select this parameter when
one or two speakers are connected.
Automatically selects the most suitable
decoder for input signals whether or not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1channel.
Always reproduces signals in 5.1-channel
whether or not the flag for reproducing
surround back channel is present.

Description

The number of input signal channels (front/
surround/LFE).
For example, if input signal channels are 3
front channels, 2 surrounds and LFE, “3/2/
0.1” is displayed.
If a channel that cannot be expressed as the
above, a total number of channels such as
“5.1ch” may be displayed.
The sampling frequency per second in
analog-to-digital conversion.
The bit rate of input signal per second.

Notes
• “No Signal” is displayed when no signals are input and “---” is displayed
when signals that this unit cannot recognize are input.
• The bit rate may vary during playback.

■

Video information
Information

Description
Format and resolution of video input signal.
Format and resolution of video output signal.

HDMI error information
(appears only when an error has occurred)
Information

Description
Error messages about HDMI signals and
HDMI components.See the following for
details of the error messages.

HDCP Error
Device Over

■

HDCP authentication failed.
The number of HDMI components
connected is over the limit.

FM Mode

Input source: TUNER
Choices:
Stereo*/Mono

Sets FM broadcasting receiving mode.
Stereo Receives in stereo mode.
Mono
Receives in monaural mode. You can get better
reception in MONO mode.

34 En

Setting the option menu for each input source (OPTION menu)

■

Auto Preset

Input source: TUNER

■

INTRODUCTION

Automatically detects radio stations in the FM frequency
band and registers them as preset stations (see page 28).

Clear Preset

Input source: TUNER

Clears the preset stations (see page 29).
■

Shuffle

Input source: iPod (DOCK)
Choices:
Off*/Songs/Albums

■

PREPARATION

Changes the shuffle playback style (see page 31).

Repeat

Input source: iPod (DOCK)
Choices:
Off*/One/All

Changes the repeat playback style (see page 31).
■

Connect / Disconnect

Input source: Bluetooth (DOCK)

■

BASIC
OPERATION

Switches communication with a Bluetooth component on
and off (see page 32).

Pairing

Input source: Bluetooth (DOCK)

Performs pairing of this unit and a Bluetooth component
(see page 32).

ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
English

35 En

Editing surround decoders/sound field programs
Selecting a decoder used with a sound
field program
When using sound field programs for movies or TV
programs (except for Mono Movie), you can select a
surround decoder to be used with the sound field program
after setting the parameters from the following decoders.
To set the parameters for sound field programs, see the
following section.
Decoders that can be used with a sound field
program
• PLIIx Movie (PLII Movie)
• Neo:6 Cinema

Setting sound field parameters
Although the field sound programs would satisfy you as
they are with the default parameters, you can arrange
sound effect or decoders suitable for acoustical conditions
of sources or rooms by setting the parameters (sound field
elements).
y
• You can protect the sound field against the changes of parameters the
sound filed parameters when “Memory Guard” of the setup menu is set
to “On” (see page 43). To change the parameters, set it to “Off.”

1

Press lSETUP on the remote control.
The setup menu appears on the front panel display.

2

Press nCursor k / n to select “DSP
Parameter” and press nENTER.
The screen changes as follows.

5

To initialize the parameters of the selected sound field
program, nCursor n repeatedly to select “Initialize”
and then press, nCursor h. When “Press Again h”
appears on the front panel display, press nCursor h
again, press nCursor h to confirm the initialization
or nCursor l to cancel it.

Sound field parameters
y
• The default settings are marked with “*.”

CINEMA DSP parameters

DSP Level
Adjustable range: -6 dB to 0 dB* to +3 dB

Fine adjusts an effect level (level of the sound field effect
to be added). You can adjust the level of the sound field
effect while checking sound levels. Adjust “DSP Level” as
follows.
• The effect sound is too soft.
• There are no differences between effects of the sound
field programs.
→Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→Reduce the effect level.

Parameters only usable in certain sound
field programs
■

PRM:Sci-Fi

To end the edit, press nRETURN.

2ch Stereo only

Direct
Choices:

Sound field program

3
4

Press nCursor l / h to select the sound
field program.
Press nCursor k / n to select the parameter
that you want to change, and press nCursor
l / h to change the parameter.
You can change the parameter display in the
following order by pressing nCursor n repeatedly.
• sound field program
• surround decoder
• sound field parameter
For sound field parameters, see “Sound field
parameters” on this page.
y
• Repeat steps 4 and 5 to change other sound field program
parameters.

36 En

Auto*/Off

Automatically bypasses the DSP circuit and tone control
circuit when an analog sound source is selected as the
input source. You can enjoy a higher quality sound.
Auto Outputs sound by bypassing the DSP circuit and
tone control circuit when the “Bass” and “Treble”
tone controls are both set to 0 dB.
Off Do not bypass the DSP circuit and tone control
circuit.
■

7ch Stereo only

CT Level/SL Level/SR Level/
SB Level
Adjustable range: 0 to 100%

Adjusts the volume of the center (CT), surround L (SL)
surround R (SR) and surround back (SB) channels in the
7ch Stereo program. The available parameters differ
depending on the setting of the speakers.

Editing surround decoders/sound field programs

■

Straight Enhancer/7ch Enhancer only

EFCT LVL
Choices:

High*/Low

INTRODUCTION

Adjusts the Compressed Music Enhancer effect level.
When the high-frequency signals of the source is
emphasized too much, set the effect level to “Low.” To
reduce the effect, set this parameter to “Low.” To increase
the effect, set it to “High.”

Decoder parameters

■

PREPARATION

You can customize decoder effects by setting the
following parameters. For kinds of decoders, see page 26.
When PLIIx Music/PLII Music is selected

Panorama
Choices:

Off*/On

BASIC
OPERATION

Adjusts the soundscape of the front sound field. Sends
stereo signals to the surround speakers as well as the front
speakers for a wraparound effect.

Dimension
Adjustable range: -3 to STD* to +3

ADVANCED
OPERATION

Adjusts the difference in level between the front sound
field and the surround sound field. You can adjust the
difference in level created by the software being played
back to obtain the preferred sound balance. The surround
sound gets stronger as you make the value more negative
and the front sound gets stronger as you make the value
more positive.

CT Width
Adjustable range: 0 to 3* to 7

■

ADDITIONAL
INFORMATION

You can spread the center sound toward left and right
according to your preference. Set this parameter to 0 for
outputting the center sound from the center speaker only,
or to 7 for outputting it from the front left/right speaker.
When Neo:6 Music is selected

C.Image
Adjustable range: 0.0 to 0.3* to 1.0

Adjusts the front left and right channel output relative to
the center channel to make the center channel more or less
dominant as necessary.
APPENDIX
English

37 En

Operating various settings for this unit (Setup menu)
You can call the setup menu using the remote control and change the settings of various menus.
You can change the following settings in the setup menu. For details, read “Basic operation of the setup menu” first, and
see the respective pages.
Menu/Submenu
Speaker Setup

Function

Page

Sets items for speakers.

39

1 Auto Setup (YPAO)

Automatically adjusts output characteristics of speakers.

39

2 Manual Setup

Manually adjusts output characteristics of speakers.

39

A)Config

Sets speaker configurations, such as connection status of speaker and a size of the
connected speaker (sound reproduction capacity), suitable for the listening
environment.

39

B)Level

Separately adjusts volume of each speaker.

41

C)Distance

Adjusts timing at which each speaker outputs sound based on distances between
speakers and the listening position.

41

D)Equalizer

Selects an equalizer that adjusts speaker output characteristics.

41

E)Test Tone

Generates test tones.

41

Sets various items for sound outputs.

41

1 D. Range

Adjusts dynamic ranges of speakers and headphones.

41

2 Lipsync

Adjusts delay in output timing between video signals and audio signals.

41

Sets on or off of automatic adjustments for delay between output timing between
video signals input from the HDMI jack and audio signals.

41

Auto

Fine adjusts a delay time of HDMI Auto.

42

Manual

Manually fine adjusts the delay of audio and visual output.

42

Sound Setup

HDMI Auto

Func. Setup

Set various items for HDMI and display.

42

Sets various items for input sources.

42

Standby

Selects on or off of output of HDMI signals input from the HDMI IN jack to the
HDMI OUT jack when this unit is on standby.

42

Audio

Selects this unit or a component connected to this unit via the HDMI OUT jack of
this unit for reproducing sound signals input from the HDMI IN jack.

42

1 HDMI

2 Display

Set items for the front panel display.

42

Dimmer

Sets brightness of the front panel display.

42

FL Scroll

Selects the way to display characters on the front panel display.

42

Sets items for volumes.

42

Adptv DRC

Adjust the dynamic range (difference between the maximum volume and the
minimum volume) in conjunction with the volume level.

42

MaxVol

Sets the maximum volume level so that the volume will not be accidentally
increased.

43

IniVol

Sets the volume at the time this unit is turned on.

43

3 Volume

Changes input source names to be displayed on the front panel display.

43

DSP Parameter

4 Input Rename

Sets parameters for the sound field programs.

43

Memory Guard

Protects some settings against accidental alteration.

43

38 En

Operating various settings for this unit (Setup menu)

Basic operation of the setup menu
Press lSETUP on the remote control.
The setup menu screen appears.

2

Select a menu using nCursor k / n, and
press nENTER.
Items of the selected menu are displayed. For
example, the following screen appears when you
select “Function Setup.”

y
• You can return to the previous screen by pressing nRETURN.

3

Dimmer;;;;;;;0
Select an item using nCursor k / n, and
change the setting of the item using
nCursor l / h.
y

Automatically adjusts output characteristics of speakers to
obtain optimum balance for the output sound based on
positions and performances of the speakers and acoustic
characteristics or the room, which are automatically
measured. For details on operations, see page 18.

2 Manual Setup
Adjusts output characteristics of speakers based on
manually set parameters.
After Auto Setup (YPAO) is performed, you can check
automatically adjusted parameters in the Manual Setup
menu. Fine adjust the parameters for your preference if
necessary.
■ A)Config
Sets speaker configurations, such as connection status of
speaker and a size of the connected speaker (sound
reproduction capacity), suitable for the listening
environment.
y
• The speaker configuration includes items for defining a speaker size:
Large or Small. Large and Small refer to speakers with woofer diameters
16 cm or larger and smaller than 16 cm, respectively.

• You can change other items by repeating step 4.

Bass Out

To finish the setting, press lSETUP.

Choices:

y
• When nCursor or other keys do not work after completing the menu,
select the input source again using gInput selection keys.

SWFR/Front/Both*

Selects speaker(s) for outputting low-frequency
components of the LFE (low-frequency effect sound)
channel or other channels. The output status is as follows.
LFE channel signals
Parameter

Subwoofer

Front
speakers

ADDITIONAL
INFORMATION

5

1 Auto Setup

ADVANCED
OPERATION

4

• The default settings are marked with “*.”

BASIC
OPERATION

To display submenus, select a menu that you
want to set using nCursor k / n, and press
nENTER.
For example, the following screen appears when you
select “2 Display.”

y

PREPARATION

1HDMI

You can set various items for speakers. Two kinds of
adjustments are available. One is “Auto Setup (YPAO)”
for automatic adjustment and another is “Manual Setup”
for manual adjustment.

INTRODUCTION

1

Speaker Setup

Other
speakers

Output

Not output

Not output

SWFR

Output

Not output

Not output

Front

Not output

Output

Not output

APPENDIX

Both

English

39 En

Operating various settings for this unit (Setup menu)

Low-frequency components of other channel signals
Parameter

Front
speakers

Subwoofer

Other
speakers

Both

[1]

[2]

[3]

SWFR

[4]

[3]

[3]

Front

Not output

[1]

[3]

[1]

[2]
[3]
[4]

Outputs low-frequency components of the front left and right
channels and the channel of speaker, the size of which is set to
“Small.”
Outputs low-frequency components of the front left and right
channels.
Outputs low frequency components when the sizes of speakers
are set to “Large.”
Outputs low-frequency components of the channel of speaker,
the size of which is set to “Small.”

Front
Choices:

Small

Large
y

• When “None” is selected, the sound field programs automatically enter
the Virtual CINEMA DSP mode.

Sur. B
Choices:

None

Small/Large*

Select this when small speakers are
connected. Low-frequency components of the
front left and right channels are output from a
subwoofer.
Select this when large speakers are
connected.

Large

SMLx1

SMLx2

Note
• When “Bass Out” is set to “Front,” you can only select “Large.” If “Bass
Out” is changed to “Front,” “Front” automatically switches to “Large”
even when it is set to “Small.”

Center
Choices:

LRGx1

LRGx2
None/Small*/Large

Sets the size of center speaker.
None

Select this when no center speaker is
connected. Center channel signals are spread
to front left and right speakers.
Select this when a small center speaker is
connected. Low-frequency components of
center channel are output from a subwoofer.
If a subwoofer is not connected they are
output from front speakers.
Select this when a large center speaker is
connected.

Small

Large

Sur. LR
Choices:

None/Small*/Large

None*/SMLx1/SMLx2/LRGx1/LRGx2

Sets sizes of left and right surround back speakers. When
using the surround back speakers, connect an external
amplifier to the SURROUND BACK jacks of the PRE
OUT terminals.

Sets the sizes of front left and right speakers.
Small

Select this when small surround speakers are
connected. Low-frequency components of
surround channels are output from a
subwoofer. If a subwoofer is not connected
they are output from front speakers.
Select this when large surround speakers are
connected.

Select this when no surround back speaker
are connected. Surround back channel signals
are output from the surround L/R speakers
and subwoofer. If the subwoofer is disabled,
they are output from the surround L/R
speakers and front speakers.
Select this when one small surround back
speaker is connected to an external amplifier
for the surround back speaker.
Select this when two small surround back
speakers are connected to an external
amplifier for the surround back speakers.
Select this when one large surround back
speaker is connected to an external amplifier
for the surround back speaker.
Select this when two large surround back
speakers are connected to an external
amplifier for the surround back speakers.

y
• When “None” is selected, “PLIIx Movie” or “PLIIx Music” cannot be
selected.

Crossover
Choices:

40Hz/60Hz/80Hz*/90Hz/100Hz/110Hz/120Hz/
160Hz/200Hz

Sets the lower limit of the low frequency component
output from a speaker with a size set to “Small (SMLx1/
SMLx2).” Sound with a frequency below that limit is
output from a subwoofer or front speakers.
If your subwoofer has a volume control or a crossover
frequency control, set the volume to half or the crossover
frequency at the maximum.

Sets sizes of left and right surround speakers.

SWFR Phase

None

Choices:

Select this when no surround speakers are
connected. Surround channel signals are
spread to front left and right speakers.
“Sur.B” automatically switches to “None”
when this is selected.

NRM
REV

40 En

NRM*/REV

Sets the phase of your subwoofer if bass sounds are
lacking or unclear.
Select this not to change the phase of your
subwoofer.
Select this to reverse the phase of your
subwoofer.

Operating various settings for this unit (Setup menu)

■

B)Level

GEQ

Adjustable range: -10.0dB to +10.0dB (0.5 dB step)
Defaults:
“FL/FR/SW” 0dB*
“C/SL/SR/SBL/SBR” -1.0dB

63Hz/160Hz/400Hz/1kHz/2.5kHz/
6.3kHz/16kHz
Adjustable range: -6.0dB to 0dB* to +6.0dB (0.5 dB step)

Separately adjusts volume of each speaker so that the
sounds form speakers are at the same volume at the
listening position. Items to be displayed vary depending
on the number of speakers connected.

Adjusts sound quality of each speaker using a graphic
equalizer. The graphic equalizer of this unit can adjust
signal levels in 7 frequency ranges.
To adjust the signal level within each range, select the
desired speaker with nCursor l / h while “Channel”
is displayed, then the desired frequency band with
nCursor k / n, and adjust the signal level with
nCursor l / h.

■ C)Distance
Adjusts timing at which each speaker outputs sound so
that sounds from speakers reach the listening position at
the same time. Set unit (Unit) first and set the distance of
each speaker.
meters (m)/feet (ft)*

meters (m)
feet (ft)

Displays the speaker distance in meters.
Displays the speaker distance in feet.

Adjustable range: 0.30m to 24.00m (1.0ft to 80.0ft)
Defaults:
3.00m (10.0ft) “Front L/Front R/
SWFR”
2.60m (8.5ft) “Center”
2.40m (8.0ft) “Sur. L/Sur. R/
Sur.B L/Sur.B R”

y

Note
• If Auto Setup is executed while an external amplifier for the surround
back speaker being connected, a distance to the surround back speaker
longer than an actual distance may be displayed depending on the
volume or balance setting of the external amplifier.

EQ Select
Choices:

PEQ/GEQ*/Off

Select an equalizer type.
PEQ
GEQ

Sound Setup
You can set various items for sound outputs.
■

1 D.Range

Choices:

Min/Auto/STD/Max*

Selects the dynamic range adjustment method for
reproducing bitstream signals.
Min/Auto (Min) Sets the dynamic range suitable for
low volume or a quiet environment, such as
at night, for bitstream signals except for
Dolby TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby
TrueHD signals based on input signal
information.
STD
Sets the standard dynamic range
recommended for regular home use.
Max
Outputs sound without adjusting the
dynamic range of the input signals.
■ 2 Lipsync
Adjusts delay between video output and audio output.

HDMI Auto
Choices:

Off*/On

Automatically adjusts output timing of audio and video
signals when a monitor that supports an automatic lipsync function is connected to this unit.
Off

On

Select this when the connected monitor does
not support the automatic lip-sync function or
you do not use the automatic lip-sync
function. Set the correction time in “Manual.”
Select this when the connected monitor
supports the automatic lip-sync function. Fine
adjust the correction time in “Auto Delay.”

41 En

English

Off

Uses a parametric equalizer selected in
“1 Auto Setup.”
Uses a graphic equalizer. Press nENTER
to adjust the characteristics of the graphic
equalizer.
Not use a graphic equalizer.

Not generate test tones.
Generates test tones.

APPENDIX

■ D)Equalizer
Adjusts sound quality and tone using a parametric graphic
equalizer.

Off
On

ADDITIONAL
INFORMATION

• Different items are displayed depending on settings of “A)Config” (see
page 39).
• When only one surround back speaker is connected, “Sur. B” appears
instead of “Sur.B L” and “Sur.B R.”

Off*/On

Switches between on and off of an oscillator that generates
test tones. To turn on the oscillator, select “On” using
nCursor l / h. When “On” is selected, you can adjust
the settings of “2 Manual Setup” while listening to a test
tone.

ADVANCED
OPERATION

Front L / Front R / Center / Sur. L /
Sur. R / Sur.B L / Sur.B R / SWFR

E)Test Tone

Choices:

BASIC
OPERATION

Unit
Choices:

■

PREPARATION

• When only one surround back speaker is connected, “SB” appears
instead of “SBL” and “SBR.”
• You can adjust the volume listening to test tones when you set “Test
Tone” to “On” (see page 41).
• If your subwoofer has a volume control or a crossover frequency control,
set the volume to half or the crossover frequency at the maximum.

INTRODUCTION

y

Choices:

Operating various settings for this unit (Setup menu)

Auto
Adjustable range: 0 to 240ms (1 ms step)

Enables manual fine adjustment of the correction time
when “HDMI Auto” is set to “On.”

Manual

2 Display
You can set items for the front panel display.
■

Dimmer

Adjustable range: -4 to 0*

Adjustable range: 0* to 240ms (1 ms step)

Manually adjusts the correction time. Select this when the
connected monitor does not support the automatic lip-sync
function or you set “HDMI Auto” to “Off.”

Function Setup
You can set various items for HDMI and display.

Sets brightness of the front panel display. As the value is
lowered, the brightness of the front panel display is
darkened.
Note
• The brightness of display does not become bright in direct mode even if
the value is increased.

■

FL Scroll

Choices:

1 HDMI

Cont*/Once

You can set items for HDMI.

Selects the way to scroll the screen when a total number of
characters exceed a display area of the front panel display.

■

Cont

Repeatedly displays all characters by
scrolling.
Displays all characters by scrolling once,
halts scrolling, and then displays first 14
characters.

On/Off*

Selects on or off of output of HDMI signals input from the
HDMI IN jack to the HDMI OUT jack when this unit is on
standby. When this parameter is set to “On” signals input
from the HDMI 1-4 jacks can be output to a monitor
component.

Once

On

You can set items for volumes.

Off
y

• To enables pass-through output, any one of the input sources connected
to the HDMI1-4 must be selected before switching to standby.
• When Standby Through turns on, the HDMI THROUGH indicator on the
front panel display lights up. While the indicator lights up, this unit
consumes up to 3W of power even on standby.

■

Audio

Choices:

Amp*/TV/Amp+TV

Selects this unit or a component connected to this unit via
the HDMI OUT jack of this unit for reproducing sound
signals input from the HDMI IN jack.
Amp
TV

Amp+TV

Outputs HDMI sound signals form the
speakers connected to this unit.
Outputs HDMI sound signals from the
speakers of a TV connected to this unit.
Sound output from the speakers connected to
this unit is muted.
Outputs HDMI sound signals from the
speakers connected to this unit and the
speakers of a TV connected to this unit.

Note
• Signal formats of audio and visual signals output from this unit to the
monitor vary depending on specifications of the monitor.

42 En

■

Adptv DRC

Choices:

Auto/Off*

Adjust the dynamic range in conjunction with the volume
level. This feature is useful when you are listening at
lower volumes or at night. When this function is enabled,
the dynamic range is adjusted as follows.
If the VOLUME setting is low:
the dynamic range is narrow
If the VOLUME setting is high:
the dynamic range is wide

Output level

Outputs the HDMI signals to the HDMI OUT
jack.
Not output the HDMI signals to the HDMI
OUT jack.

3 Volume

Auto

Off
Input level
VOLUME: low

Auto
Off

Output level

Standby

Choices:

Auto
Off
Input level
VOLUME: high

Adjusts the dynamic range automatically.
Not adjust the dynamic range automatically.

y
• The Adaptive DRC setting is effective for headphones.

Operating various settings for this unit (Setup menu)

■

MaxVol

Adjustable range: -30.0dB to +15.0dB/+16.5dB* (5.0 dB
step)

■

IniVol

Choices:

Off*/Mute/-80.0dB to +16.5dB (0.5 dB step)

Memory Guard
Choices:

Off*/On

Protects settings of setup menu against accidental
alteration.
Off
On

Not protect settings.
Protects the settings of the setup menu
(except for the Memory Guard setting).

Note
• When you set “MaxVol” and “IniVol,” the setting of “MaxVol” becomes
effective. For example, when you set “MaxVol” to “–30.0dB” and
“IniVol” to “0.0dB,” the volume is automatically set to “–30.0dB” at the
next time this unit is turned on.

BASIC
OPERATION

4 Input Rename
Changes input source names to be displayed on the front
panel display.
You can select an input source that you want to change the
name to be displayed using nCursor.

ADVANCED
OPERATION

Selecting a name to be displayed from templates
Select an input source that you want to change the name,
and select a name from the following templates using
Cursor.
– Satellite
– VCR
– Tape
– MD
– PC
– iPod
– HD DVD
– “blank”

ADDITIONAL
INFORMATION

– Blu-ray
– DVD
– SetTopBox
– Game
– TV
– DVR
– CD
– CD-R

Entering an original name
Select an input source that you want to name, and press
nENTER. You can enter up to 9 characters by selecting
one character at a time with the following keys according
to the following operation.
nCursor l / h

nENTER

For selecting characters that you
want to change
For selecting characters to be
entered
For entering the selected characters

APPENDIX

nCursor k / n

PREPARATION

Sets the volume at the time this unit is turned on. When
this parameter is set to “Off,” the volume is set to a level
that last time this unit is set to standby.

You can set parameters for the sound field programs. For
details, see page 36.

INTRODUCTION

Sets the maximum volume level so that the volume will
not be accidentally increased. For example, you can adjust
the volume between –80.0 dB and –5.0 dB when you set
this parameter to “–5.0dB.” The volume increases to the
maximum level when this parameter is set to +16.5 dB
(default).

DSP Parameter

The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space

English

43 En

Controlling other components with the remote control
You can control external components for a selected input source with the remote control. The keys available for
controlling external components are as follows:
dSOURCE POWER
Turns on and off an external component.

Input source

nCursor, ENTER, RETURN
Operates the menus of external components.
pDISPLAY
Switches between the screens of external components.
rExternal component operation keys
Function as a recording or playback key of an external
component, or a menu display key.
sNumeric keys
Function as numeric keys of an external component.
tTV control keys
INPUT
MUTE
TV VOL +/–
TV CH +/–
POWER

Switches visual inputs of TV
Mute audio of TV
Controls the volume of TV
Switches channels of TV
Turns on and off TV

The following remote control codes are assigned to input
sources as factory default settings. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
■

Default remote control code settings
Input source

Category

Manufacturer

Default
code

[HDMI1]

Blu-ray Disc

Yamaha

2018

[HDMI2]

—

—

—

[HDMI3]

—

—

—

[HDMI4]

—

—

—

[AV1]

—

—

—

[AV2]

—

—

—

[AV3]

CD

Yamaha

5013

[AV4]

—

—

—

[AV5]

—

—

—

[AV6]

—

—

—

[AUDIO1]

—

—

—

[AUDIO2]

—

—

—

[V-AUX]

—

—

—

[TUNER]

Tuner

Yamaha

5007

44 En

Manufacturer

Default
code

[DOCK]

DOCK

Yamaha

5011

[A]/[B]

—

—

—

“—” indicates no assignment

y
• An external component that is controlled by the remote control can be
automatically selected according to selection of the scenes (see page 21).

Setting remote control codes
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.

1

Press cCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
bTRANSMIT on the remote control blinks twice.

2

Press gInput selection keys.

3

Enter a remote control code using
sNumeric keys.
Once the remote control code is registered,
bTRANSMIT on the remote control blinks twice.
If it fails, bTRANSMIT blinks six times. Repeat
from step 1.

y
• You can use tTV control keys only for controls of TV regardless
of selected input sources.
• You need to set the remote control code first to control external
components.
• The remote control keys for controlling external components are
available only when the external components have corresponding control
keys.

Category

Resetting all remote control codes
You can clear all the remote control codes previously set,
and reset all of them to the initial factory settings.

1

Press cCODE SET on the remote control
using a pointed object such as a tip of a
ballpoint pen.
bTRANSMIT on the remote control blinks twice.

2

Press lSETUP on the remote control.

3

Enter “9981” using sNumeric keys.
Once the initialization is complete, bTRANSMIT
on the remote control blinks twice. If it fails,
bTRANSMIT blinks six times. Repeat from
step 1.

Advanced setup

Set this unit to the standby mode.

2

Press ASTANDBY/ON while pressing and
holding LSTRAIGHT on the front panel.
The advanced setup menu appears on the front panel
display.

Two IDs are provided for the remote control of this unit. If
another Yamaha amplifier is in the same room, setting a
different remote control ID to this unit prevents unwanted
operation of the other amplifier.
ID1 is set for both remote control and amplifier by default.
When you change the remote control ID, display
“Advance Setup” (see the previous section) and change the
ID for the amplifier too.

2

Press lSETUP on the remote control.

3

Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using sNumeric keys.
To switch to ID2:
Enter “5020” using sNumeric keys.
Once the remote control code is registered,
bTRANSMIT blinks twice.
If it fails, bTRANSMIT blinks six times. Repeat
from step 1.

ADVANCEDSETUP
3

Press KPROGRAM l / h repeatedly to
select the parameter you want to change.
The default setting are marked with “*.”
y
• XXX in the following parameters indicate the set values.

SP IMP. - XXX
Choices:

6 MIN/8 MIN*

Selects output impedance of this unit according to
connected speakers.

REMOTE ID-XXX
Choices:

ID1*/ID2

Sets a remote control ID. When using multiple
Yamaha AV receivers, you can operate them with a
single remote control by setting the receiver IDs to
the same setting.

y
• Initializing the remote control code (see page 44) returns it to ID1.

ADVANCED
OPERATION

Press cCODE SET on the remote control
using a pointed object such as the tip of a
ballpoint pen.
bTRANSMIT blinks twice.

BASIC
OPERATION

1

PREPARATION

1

Setting a remote control ID
INTRODUCTION

In the advanced setup, you can set basic operations of this
unit, such as on and off of a bi-amp connection, or
initialize user settings. Perform the following steps to
change settings.

INIT-XXXXXXXXX
ADDITIONAL
INFORMATION

Choices:

DSP PARAM/ALL/CANCEL

Initializes various settings stored in this unit. You can
select an initialization method from the following.
DSP PARAM: All parameters of sound field
programs
ALL:
Reset this unit to initial factory
settings
CANCEL:
Cancellation of initialization

5

Press ASTANDBY/ON, turns off this
system, and press ASTANDBY/ON again.
The value set in step 3 becomes effective, and this
unit turns on. When you select initialization in step 3,
the initialization is performed.

English

Press LSTRAIGHT a few times to select the
value you want to change.
The value selected here becomes effective when this
unit is turned on the next time. You can change
multiple settings by repeating steps 3 and 4.

APPENDIX

4

45 En

APPENDIX
Troubleshooting
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.

General
Problem
This unit fails to turn
on or enters the
standby mode soon
after the power is
turned on.

Cause

Remedy

See
page

The power cable is not connected or the
plug is not completely inserted.

Connect the power cable properly to an AC wall
outlet.

—

The speaker impedance setting is
incorrect.

Set the speaker impedance to match your speakers.

45

(When this unit is turned back on and
“CHECK SP WIRES!” is displayed.) The
protection circuitry has been activated
because this unit was turned on while a
speaker cable was shorted.

Make sure that all speaker cables between this unit
and speakers are connected properly.

11

This unit cannot be
turned off.

The internal microcomputer is frozen due
to an external electric shock (such as
lightning or excessive static electricity) or
by a drop in power supply voltage.

Disconnect the power cable from the AC wall outlet,
wait about 30 seconds and then plug it in again.

—

No sound.

“Audio” in “1 HDMI” of Function Setup
is set to “TV.”

Select a choice for “Audio” (Function
Setup→1 HDMI→Audio) other than “TV.”

42

A proper audio decoder is not selected.

Display the OPTION menu and set “Decoder Mode”
to “Auto.”

33

Incorrect input or output cable
connections.

Connect the cables properly. If the problem persists,
the cables may be defective.

14-16

No appropriate input source has been
selected.

Select an appropriate input source with NINPUT l
/ h or the gInput selection keys on the
remote control.

21

Speaker connections are not secure.

Secure the connections.

11

The volume is turned down or muted.

Turn up the volume.

—

Signals this unit cannot reproduce are
being input from a source component,
such as a CD-ROM.

Display Signal info of the option menu and check the
input signal format.
If “No Signal” is displayed, check if the playback
component is properly connected to this unit (or a
proper input source is selected).
If “___” is displayed, the input signal in that format
cannot be reproduced by this unit.

—

The HDMI components connected to this
unit do not support the HDCP copy
protection standards.

Connect HDMI components that support the HDCP
copy protection standards.

55

46 En

Troubleshooting

Problem
No picture.

Cause

Remedy

See
page

14

Non-standard video signals are input.

Connect the monitor to this unit via the
COMPONENT OUT jacks or the composite output
terminals.

14

The protection circuitry has been activated
because of a short circuit, etc.

Check that the speaker impedance setting is correct.

45

Check that the speaker wires are not touching each
other and then turn this unit back on.

—

The sleep timer has turned off this unit.

Turn on this unit, and play the source again.

—

Sound is heard from
the speaker on one
side only.

The playback component or speakers are
not connected properly.

Connect the cables properly. If the problem persists,
the cables may be defective.

11

The speaker level settings are incorrect.

Adjust “B)Level” settings.

41

Only the center
speaker outputs
substantial sound.

When a monaural source sound field
program is applied, sound of all channels
are output from the center speaker for
some surround decoders.

Try another sound field program.

24

No sound is output
from a specific
speaker.

Output from that speaker is disabled.

Check the Speaker indicators on the front panel
display. If the corresponding indicator is turned off,
try the following.
1) Change the input source to another one.
2) With the selected sound field program, sound is not
output from that speaker. Select another sound field
program.
3) “None” may have been selected for that speaker on
this unit. Display Speaker Setup in the Setup menu
and enables output of that speaker.

6, 21, 24,
40

The volume of that speaker is set to
minimum in Speaker Setup in the Setup
menu.

Display Speaker Setup in the Setup menu and adjust
the volume (Manual Setup→B)Level).

41

This unit or speaker is malfunction.

Check the Speaker indicators on the front panel
display. If the corresponding indicator lights up,
connect another speaker and check if sound is output.
If sound is not output, this unit may be malfunction.

6, 10

This unit is in the “STRAIGHT” mode
and a monaural source is being played
back.

Press LSTRAIGHT or the jSTRAIGHT on the
remote control to turn off the “STRAIGHT” mode.

27

Sound may not be output from certain
channels depending on input sources or
sound field programs.

Try another sound field program.

24

The sound suddenly
goes off.

No sound is heard
from the surround
speakers.

APPENDIX

If your monitor does not support the HDMI
connection, connect it to the COMPONENT OUT
jacks or the composite output terminals and select an
appropriate video input on the monitor.

ADVANCED
OPERATION

The composite output terminals are used
to output a component video signal, or the
COMPONENT VIDEO jacks are used to
output a composite video signal.

BASIC
OPERATION

—

PREPARATION

Select an appropriate video input on the monitor.

INTRODUCTION

An appropriate video input is not selected
on the monitor.

English

47 En

Troubleshooting

Problem
No sound is heard
from the subwoofer.

Cause

Remedy

See
page

“Bass Out” of “A)Config” in “Speaker
Setup” of the setup menu (Speaker
Setup→Manual Setup→A)Config) is set
to “Front” when a Dolby Digital, DTS or
AAC signal is being played.

Set “Bass Out” to “SWFR” or “Both.”

39

“Bass Out” of “A)Config” in “Speaker
Setup” of the setup menu (Speaker
Setup→Manual Setup→A)Config) is set
to “SWFR” or “Front” when a 2-channel
source is being played.

Set “Bass Out” to “Both.”

39

The source does not contain low
frequency signals.
No sound is heard
from the surround
back speakers.

“EXTD Surround” in the OPTION menu
is set to “Off,” or an input signal does not
contain a surround back flag with “EXTD
Surround” set to “Auto.”

Set “EXTD Surround” other than “Off” or “Auto.”

40

The audio input
sources cannot be
played in the desired
digital audio signal
format.

The connected component is not set to
output the desired digital audio signals.

Set the playback component properly referring to its
operating instructions.

—

Noise/hum noise is
heard.

Incorrect cable connection.

Connect the audio cables properly. If the problem
persists, the cables may be defective.

—

A DTS-CD is being played back.

1) When only noise is output
If a DTS bitstream signal is not properly input to this
unit, only noise is output. Connect the playback
component to this unit by digital connection and play
back the DTS-CD. If the condition is not improved,
the problem may results from the playback
component. Consult the manufacturer of the playback
component.
2) When noise is output during playback or skip
operation
Before playing back the DTS-CD, display the option
menu after selecting the input source and set
“Decoder Mode” to “DTS.”

“Memory Guard!” is
displayed and the
setting cannot be
changed.

“Memory Guard” in “Set Menu” is set to
“On.”

Set “Memory Guard” to “Off.”

43

This unit does not
operate properly.

The internal microcomputer is frozen due
to an external electric shock (such as
lightning or excessive static electricity) or
by a drop in power supply voltage.

Disconnect the power cable from the AC wall outlet,
wait about 30 seconds and then plug it in again.

—

“CHECK SP WIRES!”
appears on the front
panel display.

Speaker cables are short-circuited.

Make sure all speaker cables are connected correctly.

12

There is noise
interference from
digital or radio
frequency equipment.

This unit is too close to other digital or
radio frequency equipment.

Move this unit further away from such equipment.

—

48 En

16, 34

Troubleshooting

Problem

Cause

Remedy

This unit suddenly
enters the standby
mode.

The internal temperature becomes too
high and the overheat protection circuitry
has been activated.

Wait about 1 hour for this unit to cool down and then
turn it back on.

Cause

Remedy

—

HDMI
Problem
No picture or sound.

See
page

The number of the connected HDMI
components is over the limit.

Disconnect some of the HDMI components.

—

The connected HDMI component does not
support high-bandwidth digital copyright
protection (HDCP).

Connect an HDMI component that supports HDCP.

15

Problem
FM stereo reception is
noisy.

See
page

Check the antenna connections.

17

Replace the outdoor antenna with a more
sensitive multi-element antenna.

—

Switch to monaural mode.

34

There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.

There is multi-path interference.

Adjust the antenna height or orientation, or
place it in a different location.

—

The desired station
cannot be tuned into
with the automatic
tuning method.

You are in an area far from a station or
an input from the antenna is weak.

Replace an outdoor antenna with more
sensitive multi element antenna.

—

Tune in manually or by direct frequency
tuning.

28

The desired station
cannot be tuned into
with the automatic
tuning method.

The signal is weak or the antenna
connections are loose.

Adjust the AM loop antenna orientation.

17

Use the manual tuning method.

28

There are continuous
crackling and hissing
noises.

Supplied AM loop antenna is not
connected.

Connect the AM loop antenna correctly even
if you use an outdoor antenna.

17

The noises may be caused by lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment.

It is difficult to completely eliminate noise,
but it can be reduced by installing and
properly grounding an outdoor AM antenna.

17

A TV set is being used nearby.

Move this unit away from the TV set.

—

There are buzzing and
whining noises.

APPENDIX

AM

You are too far from the station
transmitter or the input from the
antenna is weak.

Remedy

ADVANCED
OPERATION

FM

Cause

BASIC
OPERATION

Tuner (FM/AM)

PREPARATION

The video software is copy-protected.

INTRODUCTION

The picture is
disturbed.

See
page

English

49 En

Troubleshooting

Remote control
Problem
The remote control
does not work or
function properly.

Cause

Remedy

See
page

Wrong distance or angle.

The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees
offaxis from the front panel.

9

Direct sunlight or lighting (from an
inverter type of fluorescent lamp, strobe
light, etc.) is striking the remote control
sensor of this unit.

Adjust the lighting angle or reposition this unit.

—

The batteries are weak.

Replace all batteries.

9

The remote control ID of the remote
control and this unit do not match.

Match the remote control ID of this unit and the
remote control.

45

The remote control code is not correctly
set.

Set the remote control code correctly using “List of
remote control codes” at the end of this manual.

44

Try setting another code of the same manufacturer
using “List of remote control codes” at the end of this
manual.

44

If this unit does not work when you press nCursor,
do the following.
When the key does not work during DVD disc menu
operation: press the gInput selection keys on
the remote control again.
When the key does not work during OPTION menu/
SETUP menu operation: press the key applicable for
the current menu operation again.

—

Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.

iPod
Note
• In case of a transmission error without a status message appearing on the front panel display, check the connection of your iPod (see page 16).

Problem
Loading...

Cause

Remedy

See
page

This unit is in the middle of recognizing
the connection with your iPod.
This unit is in the middle of acquiring
song lists from your iPod.

Connect error

There is a problem with the signal path
from your iPod to this unit.

Unknown iPod

The iPod being used is not supported by
this unit.

iPod Connected

Your iPod is properly placed in the
Yamaha iPod universal dock.

Disconnected

Your iPod is removed from the Yamaha
iPod universal dock.

50 En

Turn off this unit and reconnect the Yamaha iPod
universal dock to the DOCK terminal of this unit.

16

Remove your iPod in the Yamaha iPod universal dock
and then place it back in the dock.

16

This unit supports iPod Touch, iPod (Click Wheel),
iPod nano and iPod mini.

—

Place your iPod in the Yamaha iPod universal dock.

16

Troubleshooting

Problem
Unable to play

Cause

See
page

Check that the songs currently stored on your iPod
are playable.

—

Store some other playable music files on your iPod.

—

Bluetooth™
Problem

Remedy

See
page

PREPARATION

Searching...

Cause
The Bluetooth wireless audio receiver and
the Bluetooth component are in the
middle of the pairing.
The Bluetooth wireless audio receiver and
the Bluetooth component are in the
middle of establishing the connection.

Canceled

The pairing is canceled.

BT Connected

The connection between the Yamaha
Bluetooth wireless audio receiver and the
Bluetooth component is established.

BT Disconnected

The Bluetooth component is disconnected
from the Yamaha Bluetooth wireless
audio receiver.

ADVANCED
OPERATION

The pairing is completed.

BASIC
OPERATION

Completed

Auto Setup (YPAO)
Notes
If the “ERROR” or “WARNING” message appears, resolve the problem and then run “Auto Setup” again.
Warning message “W-2” or “W-3” indicates that the adjusted settings may not be optimal.
Depending on the speakers, warning message “W-1” may appears even if the speaker connections are correct.
If error message “E-10” occurs repeatedly, contact a qualified Yamaha service center.

Before Auto Setup
Error message

Cause

Remedy

See
page

Connect MIC!

Optimizer microphone is not connected.

Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.

18

Unplug HP!

Headphones are connected.

Unplug the headphones.

—

Memory Guard!

The parameters of this unit are protected.

Set “Memory Guard” to “Off.”

43

APPENDIX

•
•
•
•

INTRODUCTION

This unit cannot play back the songs
currently stored on your iPod.

Remedy

During Auto Setup
Error message

Cause

Remedy

See
page

Front L/R channel signals are not
detected.

Check the front L/R speaker connections.

11

E-2:NO SUR. SP

Only a signal from one of the surround
channels are detected.

Check the surround L/R speaker connections.

11

E-4:SBR->SBL

Only right surround back channel signal
is detected.

If you connect only one surround back speaker,
connect it to the L-side (SINGLE) terminal.

11

51 En

English

E-1:NO FRONT SP

Troubleshooting

Error message
E-5:NOISY

Cause

Remedy

See
page

Measurement cannot be performed
accurately due to loud ambient noise.

Try running “Auto Setup” in a quiet environment.

—

Turn off noisy electric equipment like air
conditioners or move them away from the optimizer
microphone.

—

E-6:CHECK SUR.

Surround back speakers are connected,
though surround L/R speakers are not.

When using surround back speakers, you need to
connect surround L/R speakers.

11

E-7:NO MIC

The optimizer microphone was
unplugged during the “Auto Setup”
procedure.

Do not touch the optimizer microphone during “Auto
Setup.”

18

E-8:NO SIGNAL

The optimizer microphone does not
detect test tones.

Check whether the microphone is properly placed.

18

Check whether the speakers are properly placed and
connected.

11

The optimizer microphone or OPTIMIZER MIC
jack may be defective. Contact the nearest Yamaha
dealer or service center.

18

E-9:USER CANCEL

“Auto Setup” was cancelled due to an
inappropriate user operation.

Run “Auto Setup” again.

18

E-10:INTERNAL ERROR

An internal error occurred.

Run “Auto Setup” again.

18

After Auto Setup
Error message

Cause

Remedy

See
page

W-1:OUT OF PHASE

Speaker polarity is not correct. This
message may appear depending on the
speakers even when the speakers are
connected correctly.

Check the polarities (+, –) of the displayed speaker.
If they are correct, the speakers work properly even
when this message is displayed.

11

W-2:OVER 24m (80ft)

The distance between the speaker and the
listening position is over 24 m (80 ft).

Bring the speaker within 24 m (80 ft.) area around
the listening position.

—

W-3:LEVEL ERROR

The difference of volume level among
speakers is excessive.

Recheck the speaker positions and make sure all
speakers are placed in a similar environment.

—

Check the polarities (+, –) of the speakers.

11

We recommended that you use speakers with the
same or similar specifications.

—

Adjust the output volume of the subwoofer.

—

Check if the volume or balance of the external
amplifier is proper.

—

If a warning message related to the
surround back speaker is displayed, the
volume or right and left balance of the
external amplifier may not be properly
set.

52 En

Glossary
■

Audio and video synchronization (lip sync)

■

Dolby Digital Surround EX

Dolby Digital EX creates 6 full-bandwidth output channels from 5.1channel sources.
For the best results, Dolby Digital EX should be used with movie
sound tracks recorded with Dolby Digital Surround EX. With this
additional channel, you can experience more dynamic and realistic
moving sound especially with scenes with “fly-over” and “flyaround” effects.

■

■

Bi-amplification connection

■

Component video signal

■

Composite video signal

■

Deep Color

■

Dolby Digital

Dolby Digital is a digital surround sound system that gives you
completely independent multi-channel audio. With 3 front channels
(front L/R and center), and 2 surround stereo channels, Dolby Digital
provides 5 full-range audio channels. With an additional channel
especially for bass effects, called LFE (Low Frequency Effect), the
system has a total of 5.1-channels (LFE is counted as 0.1 channel). By
using 2-channel stereo for the surround speakers, more accurate
moving sound effects and surround sound environment are possible
than with Dolby Surround. The wide dynamic range from maximum
to minimum volume reproduced by the 5 full-range channels and the
precise sound orientation generated using digital sound processing
provide listeners with unprecedented excitement and realism.
With this unit, any sound environment from monaural up to a 5.1channel configuration can be freely selected for your enjoyment.

■

Dolby Pro Logic IIx

Dolby Pro Logic IIx is a new technology enabling discrete
multichannel playback from 2-channel or multi-channel sources.
There are three modes available: “Music mode” for music sources,
“Movie mode” for movie sources (for 2-channel sources only) and
“Game mode” for game sources.

■

Dolby Surround

Dolby Surround is widely used with nearly all video tapes and laser
discs, and in many TV and cable broadcasts as well. Dolby Surround
uses a 4-channel analog recording system to reproduce realistic and
dynamic sound effects: 2 front left and right channels (stereo), a
center channel for dialog (monaural), and a surround channel for
special sound effects (monaural). The surround channel reproduces
sound within a narrow frequency range. The Dolby Pro Logic decoder
built into this unit employs a digital signal processing system that
automatically stabilizes the volume on each channel to enhance
moving sound effects and directionality.

■

APPENDIX

Deep Color refers to the use of various color depths in displays, up
from the 24-bit depths in previous versions of the HDMI specification.
This extra bit depth allows HDTVs and other displays go from
millions of colors to billions of colors and eliminate on-screen color
banding for smooth tonal transitions and subtle gradations between
colors. The increased contrast ratio can represent many times more
shades of gray between black and white. Also Deep Color increases
the number of available colors within the boundaries defined by the
RGB or YCbCr color space.

Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to decode vast
numbers of existing Dolby Surround sources. This new technology
enables a discrete 5-channel playback with 2 front left and right
channels, 1 center channel, and 2 surround left and right channels
instead of only 1 surround channel for conventional Pro Logic
technology. There are three modes available: “Music mode” for music
sources, “Movie mode” for movie sources and “Game mode” for
game sources.

ADVANCED
OPERATION

With the composite video signal system, the video signal is composed
of three basic elements of a video picture: color, brightness and
synchronization data. A composite video jack on a video component
transmits these three elements combined.

■

BASIC
OPERATION

With the component video signal system, the video signal is separated
into the Y signal for the luminance and the PB and PR signals for the
chrominance. Color can be reproduced more faithfully with this
system because each of these signals is independent. The component
signal is also called the “color difference signal” because the
luminance signal is subtracted from the color signal. A monitor with
component input jacks is required in order to output component
signals.

Dolby Digital Plus

Dolby Digital Plus is an advanced audio technology developed for
high-definition programming and media including HD broadcasts,
and Blu-ray Disc. Selected as an optional audio standard for Blu-ray
Disc, this technology delivers multichannel sound with discrete
channel output. Supporting bitrates up to 6.0 Mbps, Dolby Digital
Plus can carry up to 7.1 discreet audio channels simultaneously.
Supported by HDMI version 1.3 and designed for the optical disc
players and AV receivers/amplifiers of the future, Dolby Digital Plus
also remains fully compatible with the existing multichannel audio
systems that incorporate Dolby Digital.

PREPARATION

A bi-amplification connection uses two amplifiers for a speaker.
One amplifier is connected to the woofer section of a loudspeaker
while the other is connected to the combined mid and tweeter section.
With this arrangement each amplifier operates over a restricted
frequency range. This restricted range presents each amplifier with a
much simpler job and each amplifier is less likely to influence the
sound in some way.

INTRODUCTION

Lip sync, an abbreviation for lip synchronization, is a technical term
that involves both a problem and a capability of maintaining audio and
video signals synchronized during post-production and transmission.
Whereas the audio and video latency requires complex end-user
adjustments, HDMI version 1.3 incorporates an automatic audio and
video syncing capability that allows devices to perform this
synchronization automatically and accurately without user interaction.

Dolby TrueHD

53 En

English

Dolby TrueHD is an advanced lossless audio technology developed
for high-definition disc-based media including Blu-ray Disc. Selected
as an optional audio standard for Blu-ray Disc, this technology
delivers sound that is bit-for-bit identical to the studio master, offering
a high-definition home theater experience.
Supporting bitrates up to 18.0 Mbps, Dolby TrueHD can carry up to 8
discrete channels of 24-bit/96 kHz audio simultaneously.
Dolby TrueHD also remains fully compatible with the existing
multichannel audio systems and retains the metadata capability of
Dolby Digital, allowing dialog normalization and dynamic range
control.

Glossary

■

DSD

Direct Stream Digital (DSD) technology stores audio signals on
digital storage media, such as Super Audio CDs. Using DSD, signals
are stored as single bit values at a high-frequency sampling rate of
2.8224 MHz, while noise shaping and oversampling are used to
reduce distortion, a common occurrence with very high quantization
of audio signals. Due to the high sampling rate, better audio quality
can be achieved than that offered by the PCM format used for normal
audio CDs. The frequency is equal to or higher than 100 kHz and the
dynamic range is 120 dB. This unit can transmit or receive DSD
signals via the HDMI jack.

■

DTS 96/24

DTS 96/24 offers an unprecedented level of audio quality for multichannel sound on DVD video, and is fully backward-compatible with
all DTS decoders. “96” refers to a 96 kHz sampling rate compared to
the typical 48 kHz sampling rate. “24” refers to 24-bit word length.
DTS 96/24 offers sound quality transparent to the original 96/24
master, and 96/24 5.1-channel sound with full-quality full-motion
video for music programs and motion picture soundtracks on DVD
video.

■

DTS Digital Surround

DTS digital surround was developed to replace the analog soundtracks
of movies with a 5.1-channel digital sound track, and is now rapidly
gaining popularity in movie theaters around the world. DTS, Inc. has
developed a home theater system so that you can enjoy the depth of
sound and natural spatial representation of DTS digital surround in
your home. This system produces practically distortion-free 6-channel
sound (technically, front left and right, center, surround left and right,
and LFE 0.1 (subwoofer) channels for a total of 5.1 channels). This
unit incorporates a DTS-ES decoder that enables 6.1-channel
reproduction by adding the surround back channel to the existing 5.1channel format.

■

DTS Express

This is an audio format for next-generation optical discs such as Bluray discs. It uses optimized low bit rate signals for network streaming.
In the case of a Blu-ray disc, this format is used with secondary audio,
enabling you to enjoy the commentary of the movie producer via the
Internet while playing the main program.

■

DTS-HD High Resolution Audio

DTS-HD High Resolution Audio is a high resolution audio
technology developed for high-definition disc-based media including
Blu-ray Disc. Selected as an optional audio standard for Blu-ray Disc,
this technology delivers sound that is virtually indistinguishable from
the original, offering a high-definition home theater experience.
Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTS-HD High
Resolution Audio can carry up to 7.1 discrete channels of 24-bit/96
kHz audio simultaneously.
DTS-HD High Resolution Audio also remains fully compatible with
the existing multichannel audio systems that incorporate DTS Digital
Surround.

■

DTS-HD Master Audio

DTS-HD Master Audio is an advanced lossless audio technology
developed for high-definition disc-based media including Blu-ray
Disc. Selected as an optional audio standard for Blu-ray Disc, this
technology delivers sound that is bit-for-bit identical to the studio
master, offering a high-definition home theater experience.
Supporting bitrates up to 24.5 Mbps for Blu-ray Disc, DTS-HD
Master Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz
audio simultaneously. Supported by HDMI version 1.3 and designed
for the optical disc players and AV receivers/amplifiers of the future,
DTS-HD Master Audio also remains fully compatible with the
existing multichannel audio systems that incorporate DTS Digital
Surround.

54 En

■

HDMI

HDMI (High-Definition Multimedia Interface) is the first industrysupported, uncompressed, all-digital audio/video interface. Providing
an interface between any source (such as a set-top box or AV receiver)
and an audio/video monitor (such as a digital television), HDMI
supports standard, enhanced or high-definition video as well as multichannel digital audio using a single cable. HDMI transmits all ATSC
HDTV standards and supports 8-channel digital audio, with
bandwidth to spare to accommodate future enhancements and
requirements.
When used in combination with HDCP (High-bandwidth Digital
Content Protection), HDMI provides a secure audio/video interface
that meets the security requirements of content providers and system
operators. For further information on HDMI, visit the HDMI website
at “http://www.hdmi.org/.”

■

LFE 0.1 channel

This channel reproduces low-frequency signals. The frequency range
of this channel is from 20 Hz to 120 Hz. This channel is counted as
0.1 because it only enforces a low-frequency range compared to the
full-range reproduced by the other 5/6 channels in Dolby Digital or
DTS 5.1/6.1-channel systems.

■

Neo:6

Neo:6 decodes the conventional 2-channel sources for 6- channel
playback by the specific decoder. It enables playback with the fullrange channels with higher separation just like digital discrete signal
playback. There are two modes available: “Music mode” for music
sources and “Cinema mode” for movie sources.

■

PCM (Linear PCM)

Linear PCM is a signal format under which an analog audio signal is
digitized, recorded and transmitted without using any compression.
This is used as a method of recording CDs and DVD audio. The PCM
system uses a technique for sampling the size of the analog signal per
very small unit of time. Standing for “Pulse Code Modulation,” the
analog signal is encoded as pulses and then modulated for recording.

■

Sampling frequency and number of
quantized bits

When digitizing an analog audio signal, the number of times the
signal is sampled per second is called the sampling frequency, while
the degree of fineness when converting the sound level into a numeric
value is called the number of quantized bits. The range of rates that
can be played back is determined based on the sampling rate, while
the dynamic range representing the sound level difference is
determined by the number of quantized bits. In principle, the higher
the sampling frequency, the wider the range of frequencies that can be
played back, and the higher the number of quantized bits, the more
finely the sound level can be reproduced.

■

“x.v.Color”

A color space standard supported by HDMI version 1.3. It is a more
extensive color space than sRGB, and allows the expression of colors
that could not be expressed before. While remaining compatible with
the color gamut of sRGB standards, “x.v.Color” expands the color
space and can thus produce more vivid, natural images. It is
particularly effective for still pictures and computer graphics.

Sound field program information
■

■

CINEMA DSP

SILENT CINEMA

Yamaha has developed a natural, realistic sound effect DSP algorithm
for headphones. Parameters for headphones have been set for each
sound field so that accurate representations of all the sound field
programs can be enjoyed on headphones.

■

Compressed Music Enhancer

The Compressed Music Enhancer feature of this unit enhances your
listening experience by regenerating the missing harmonics in a
compression artifact. As a result, flattened complexity due to the loss
of high-frequency fidelity as well as lack of bass due to the loss of
low-frequency bass is compensated, providing improved performance
of the overall sound system.

■

BASIC
OPERATION

Information on HDMI™
HDMI signal compatibility

Audio signals
Audio signal types

Audio signal formats

Compatible media

2ch, 32-192 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio, etc.

Multi-ch Linear PCM

8ch, 32-192 kHz, 16/20/24 bit

DVD-Audio, Blu-ray Disc, HD DVD, etc.

DSD

2/5.1ch, 2.8224 MHz, 1 bit

SA-CD, etc.

Bitstream

Dolby Digital, DTS

DVD-Video, etc.

Bitstream (High definition audio)

Dolby TrueHD, Dolby Digital Plus, DTS-HD
Master Audio, DTS-HD High Resolution Audio,
DTS Express

Blu-ray Disc, HD DVD, etc.

ADVANCED
OPERATION

2ch Linear PCM

PREPARATION

■

Virtual CINEMA DSP

Yamaha has developed a Virtual CINEMA DSP algorithm that allows
you to enjoy DSP sound field surround effects even without any
surround speakers by using virtual surround speakers. It is even
possible to enjoy Virtual CINEMA DSP using a minimal two-speaker
system that does not include a center speaker.

INTRODUCTION

Since the Dolby Surround and DTS systems were originally designed
for use in movie theaters, their effect is best felt in a theater having
many speakers designed for acoustic effects. Since home conditions,
such as room size, wall material, number of speakers, and so on, can
differ so widely, it is inevitable that there are differences in the sound
heard.
Based on a wealth of actually measured data, Yamaha CINEMA DSP
provides the audiovisual experience of a movie theater in the listening
room of your own home by using the Yamaha original sound field
technology combined with various digital audio systems.

• If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio sources with the audio
commentaries mixed down by using the DIGITAL INPUT OPTICAL (or COAXIAL) connections.
• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.

Notes
• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output depending on the type of the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or DVI components.
• To decode audio bitstream signals on this unit, set the input source component appropriately so that the component outputs the bitstream audio signals
directly (does not decode the bitstream signals on the component). Refer to the supplied instruction manuals for details.
• This unit is not compatible with the audio commentary features (for example, the special audio contents downloaded via Internet) of Blu-ray Disc or HD
DVD. This unit does not play back the audio commentaries of the Blu-ray Disc or HD DVD contents.

APPENDIX

y

Video signals
This unit is compatible with the video signals of the following resolutions:
• 480i/60 Hz
• 576i/50 Hz
• 480p/60 Hz
• 576p/50 Hz
• 720p/60 Hz, 50 Hz
• 1080i/60 Hz, 50 Hz
• 1080p/60 Hz, 50 Hz, 24 Hz
English

55 En

Specifications
AUDIO SECTION
• Minimum RMS Output Power for Front, Center, Surround,
Surround back
[U.S.A. and Canada models]
1 kHz, 0.9% THD, 8 Ω ........................................................ 105 W
[Other models]
1 kHz, 0.9% THD, 6 Ω ........................................................ 105 W
• Dynamic Power (IHF)
[U.S.A. and Canada models]
Front Speakers 8/6/4/2 Ω ................................ 110/130/160/180 W
[Other models]
Front Speakers 6/4/2 Ω .......................................... 100/130/150 W
• Maximum Useful Output Power (JEITA) [China, Korea, General
and Asia models]
1 kHz, 10% THD, 6 Ω ......................................................... 140 W
• Maximum Output Power [U.K., Europe and Asia models]
1 kHz, 0.7% THD, 4 Ω ........................................................ 120 W

VIDEO SECTION
• Video Signal Type (Gray Back)
[U.S.A., Canada, Korea and General models].......................NTSC
[Other models]..........................................................................PAL
• Signal Level
Composite................................................................... 1 Vp-p/75 Ω
Component............................................................1 Vp-p/75 Ω (Y)
• Maximum Input Level (Video Conversion Off)
............................................................................. 1.5 Vp-p or more
• Signal to Noise Ratio...................................................50 dB or more
• Frequency Response [MONITOR OUT]
Component (Video Conversion Off)
................................................................ 5 Hz to 60 MHz, –3 dB

FM SECTION

• Dynamic Headroom [U.S.A. and Canada models]
8 Ω.........................................................................................0.2 dB

• Tuning Range
[U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz
[Asia and General models] ......... 87.5/87.50 to 108.0/108.00 MHz
[Other models].............................................. 87.50 to 108.00 MHz

• IEC Output Power [U.K., Europe and Asia models]
Front Speakers 1 kHz, 0.9% THD, 8 Ω ............................... 105 W

• 50 dB Quieting Sensitivity (IHF)
Mono................................................................... 3.0 µV (20.8 dBf)

• Input Sensitivity/Input Impedance
AV5, etc................................................................... 200 mV/47 kΩ

• Signal to Noise Ratio (IHF)
Mono/Stereo ............................................................... 74 dB/69 dB

• Maximum Input Voltage
AV5, etc. (1 kHz, 0.5% THD) ...................................2.3 V or more

• Harmonic Distortion (1 kHz)
Mono/Stereo ..................................................................... 0.3/0.3%

• Rated Output Voltage/Output Impedance
AUDIO OUT.......................................................... 200 mV/1.2 kΩ
PRE OUT ................................................................... 1.0 V/1.2 kΩ
SUBWOOFER (2ch Stereo & Front: Small)
................................................................................. 1.0 V/1.2 kΩ
• Headphone Jack Rated Output/Impedance
AV5, etc. (1 kHz, 50 mV, 8 Ω) ................................ 100 mV/470 Ω
• Frequency Response
AV5 to FRONT ..................................10 Hz to 100 kHz, +0/–3 dB
• Total Harmonic Distortion
AV5, etc. to FRONT, Pure Direct
[U.S.A. and Canada models]
(1 kHz, 50 W, 8 Ω)..................................................0.06% or less
[Other models]
(1 kHz, 50 W, 6 Ω)..................................................0.06% or less
• Signal to Noise Ratio (IHF-A Network)
AV5, etc. Input Shorted (250 mV to Front Speakers)
............................................................................. 100 dB or more
• Residual Noise (IHF-A Network)
Front Speakers.......................................................... 150 µV or less
• Channel Separation (1 kHz/10 kHz)
AV5, etc. (5.1 kΩ shortened)......................... 60 dB/45 dB or more
• Volume Control ................................... MUTE / –80 dB to +16.5 dB
• Tone Control (Front Speakers)
BASS Boost/Cut....................................................±10 dB at 50 Hz
BASS Turnover Frequency ..................................................350 Hz
TREBLE Boost/Cut ............................................±10 dB at 20 kHz
TREBLE Turnover Frequency ............................................3.5 kHz
• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround, Surround back: Small)
......................................................................................12 dB/oct.
L.P.F. (Subwoofer) ..........................................................24 dB/oct.

56 En

• Antenna Input (unbalanced) .......................................................75 Ω

AM SECTION
• Tuning Range
[U.S.A. and Canada models] ................................ 530 to 1710 kHz
[Asia and General models] ...................530/531 to 1710/1611 kHz
[Other models]...................................................... 531 to 1611 kHz

GENERAL
• Power Supply
[U.S.A. and Canada models] ............................... AC 120 V, 60 Hz
[General models] ...............AC 110/120/220/230–240 V, 50/60 Hz
[China model] ...................................................... AC 220 V, 50 Hz
[Korea model]...................................................... AC 220 V, 60 Hz
[Australia model]................................................. AC 240 V, 50 Hz
[U.K. and Europe models]................................... AC 230 V, 50 Hz
[Asia models]................................... AC 220/230–240 V, 50/60 Hz
• Power Consumption
[U.S.A. and Canada models] ...................................270 W/320 VA
[Other models]...................................................................... 280 W
• Standby Power Consumption
Standby through off ....................................................0.2 W or less
Standby through on........................................................3 W or less
• Dimensions (W x H x D)...................................435 x 151 x 364 mm
(17-1/8 x 6 x 14-3/8 in)
• Weight...................................................................... 8.4 kg (18.5 lbs)

* Specifications are subject to change without notice.

Index
■

Numerics

A

B

■

C

■

F

FL Scroll, 2 Display, function setup .............. 42
FM antenna connection .................................. 17
FM Mode, OPTION menu ............................. 34
FM tuning ...................................................... 28
FM, front panel ................................................ 4
Frequency tuning ........................................... 28
Front L, C)Distance, speaker setup ................ 41
Front left speaker ........................................... 10
Front panel ....................................................... 4
Front panel display .......................................... 6
Front panel display, front panel ....................... 4
Front R, C)Distance, speaker setup ............... 41
Front right speaker ......................................... 10
Front, A)Config, speaker setup ...................... 40
Function setup, setup menu ........................... 42

■

H

Hall in Munich, sound field program ............ 25
Hall in Vienna, sound field program ............. 25
HDMI Auto, 2 Lipsync, sound setup ............. 41
HDMI indicator, front panel display ............... 6
HDMI information ......................................... 55
HDMI jack ..................................................... 13
HDMI OUT/HDMI 1-4, rear panel ................. 5
HDMI THROUGH, front panel ....................... 4
HDMI, troubleshooting .................................. 49
Headphones using .......................................... 22
Hi-fi sound playback ...................................... 22
High frequency sound adjustment ................. 22

■

I

INFO, front panel ............................................. 4
INFO, remote control ....................................... 7
INIT, advanced setup ..................................... 45
Initialize setting, advanced setup ................... 45

M

Manual, 2 Lipsync, sound setup .................... 42
MaxVol, 3 Volume, function setup ............... 43
Memory guard, setup menu ........................... 43
MEMORY, front panel ................................... 4
MONITOR OUT, rear panel ........................... 5
Mono Movie, sound field program ............... 25
Multi information display,
front panel display ...................................... 6
Music Video, sound field program ................ 25
MUTE indicator, front panel display .............. 6
MUTE, remote control .................................... 7

■

N

Numeric key, remote control ........................... 7

■

O

OPTICAL jack .............................................. 13
OPTIMIZER MIC jack, front panel ................ 4
OPTION menu .............................................. 33
OPTION, remote control ................................. 7

■

P

Pairing Bluetooth components ...................... 32
Pairing, OPTION menu ................................. 35
Panorama, decoder parameter ....................... 37
PHONES jack, front panel .............................. 4
Placing speaker .............................................. 10
PORTABLE jack, front panel ......................... 4
Power cable connection ................................. 17
Power Cable, rear panel .................................. 5
POWER, remote control ................................. 7
PRE OUT, rear panel ...................................... 5
PRESET l / h, front panel ........................... 4
Preset tuning .................................................. 28
PROGRAM l / h, front panel ...................... 4
Projector connection ...................................... 14

■

R

Registering input source ................................ 21
Registering sound field program ................... 21
Remote control ................................................ 7
Remote control code resetting ....................... 44
Remote control code setting .......................... 44
Remote control ID, advanced setup .............. 45
Remote control signal transmitter,
remote control ............................................. 7
Remote control, controlling other
component ................................................ 44
Remote control, preparation ............................ 9
Remote control, troubleshooting ................... 50
REMOTE ID, advanced setup ....................... 45
Repeat playback, iPod ................................... 31
Repeat, OPTION menu ................................. 35
Resetting remote control code ....................... 44
RETURN, remote control ............................... 7
Roleplaying Game, sound field program ...... 25

■

S

SB Level, sound field parameter ................... 36
SCENE function ............................................ 21
SCENE, front panel ......................................... 4

57 En

English

C)Distance, speaker setup ..............................41
C.Image, decoder parameter ..........................37
Cellar Club, sound field program ...................25
Center speaker ................................................10
Center width, decoder parameter ...................37
Center, A)Config, speaker setup ....................40
Center, C)Distance, speaker setup .................41
Chamber, sound field program .......................25
CINEMA DSP indicator,
front panel display .......................................6
CINEMA DSP parameter ...............................36
Clear Preset, OPTION menu ..........................35
COAXIAL jack ..............................................13
CODE SET, remote control .............................7
COMPONENT VIDEO jack ..........................13
Connect, OPTION menu ................................35
Connecting AM antenna ................................17
Connecting audio and video player ................15
Connecting audio player ................................16
Connecting Bluetooth wireless audio
receiver ......................................................16
Connecting FM antenna .................................17
Connecting iPod universal dock .....................16
Connecting power cable .................................17
Connecting projector ......................................14

E

E)Test Tone, speaker setup ............................ 41
Editing sound field program .......................... 36
Editing surround decoder ............................... 36
EFCT LVL, sound field parameter ................ 37
ENTER, remote control ................................... 7
EQ Select, D)Equalizer, speaker setup .......... 41
EXTD Surround, OPTION menu .................. 34
External component operation key,
remote control ............................................. 7

■

APPENDIX

B)Level, speaker setup ...................................41
Basic operation, setup menu ..........................39
Bass Out, A)Config, speaker setup ................39
Bluetooth component playback ......................32
Bluetooth wireless audio receiver
connection .................................................16
Bluetooth, troubleshooting .............................51

■

L

Low frequency sound adjustment ................. 22

ADVANCED
OPERATION

■

D

D)Equalizer, speaker setup ............................ 41
Decoder Mode, OPTION menu ..................... 34
Decoder parameter ......................................... 37
Dimension, decoder parameter ...................... 37
Dimmer, 2 Display, function setup ................ 42
DIRECT, front panel ....................................... 4
Direct, sound field parameter ........................ 36
Disconnect, OPTION menu ........................... 35
DISPLAY, remote control ............................... 7
Displaying input signal information .............. 23
DOCK terminal, rear panel .............................. 5
Drama, sound field program .......................... 25
DSP Level, sound field parameter ................. 36
DSP Parameter, Setup menu .......................... 43

■

BASIC
OPERATION

A)Config, speaker setup .................................39
Action Game, sound field program ................25
Adjusting high frequency sound ....................22
Adjusting low frequency sound .....................22
Adptv DRC, 3 Volume, function setup ..........42
Advanced setup ..............................................45
Adventure, sound field program ....................24
AM antenna connection .................................17
AM tuning ......................................................28
AM, front panel ................................................4
ANTENNA jack, rear panel .............................5
AUDIO 1/2, rear panel .....................................5
Audio and video player connection ................15
AUDIO jack ...................................................13
Audio jack ......................................................13
AUDIO L/R jack, front panel ...........................4
AUDIO OUT, rear panel ..................................5
Audio player connection ................................16
Audio, 1 HDMI, function setup .....................42
Auto Preset, OPTION menu ..........................35
Auto Setup (YPAO), troubleshooting ............51
Auto, 2 Lipsync, sound setup .........................42
Automatic setup .............................................18
AV 1-6, rear panel ............................................5
AV OUT, rear panel .........................................5

■

IniVol, 3 Volume, function setup .................. 43
INPUT l / h, front panel .............................. 4
Input selection key, remote control ................. 7
Input signal information displaying .............. 23
Input source registration ................................ 21
Installing batteries, remote control .................. 9
iPod playback ................................................ 30
iPod universal dock connection ..................... 16
iPod, troubleshooting .................................... 50

PREPARATION

■

Connecting set-top box .................................. 15
Connecting speaker ........................................ 11
Connecting speaker cable .............................. 12
Connecting the surround back speakers ........ 11
Connecting TV monitor ................................. 14
Connection ..................................................... 10
Controlling other component,
remote control ........................................... 44
Crossover, A)Config, speaker setup .............. 40
CT Level, sound field parameter ................... 36
Cursor indicator, front panel display ............... 6
Cursors k / n / l / h, remote control ........... 7

INTRODUCTION

1 Dynamic Range, sound setup ......................41
1 HDMI, function setup .................................42
2 Display, function setup ................................42
2 Lipsync, sound setup ...................................41
2ch Stereo, sound field program ....................25
3 Volume, function setup ...............................42
4 Input Rename, function setup .....................43
5.1-channel speaker layout .............................10
6.1-channel speaker layout .............................10
7.1-channel speaker layout .............................10
7ch Enhancer, sound field program ...............26
7ch Stereo, sound field program ....................26

Index
SCENE, remote control ................................... 7
Sci-Fi, sound field program ........................... 24
Selecting SCENE ........................................... 21
Setting remote control code ........................... 44
Set-top box connection .................................. 15
Setup menu .................................................... 38
Setup menu basic operation ........................... 39
SETUP, remote control ................................... 7
Shuffle playback, iPod ................................... 31
Shuffle, OPTION menu ................................. 35
Signal Info parameter .................................... 34
Signal Info, OPTION menu ........................... 34
SILENT CINEMA ......................................... 27
SL Level, sound field parameter .................... 36
SLEEP indicator, front panel display .............. 6
Sleep timer ..................................................... 22
SLEEP, remote control .................................... 7
Sound field parameter .................................... 36
Sound field program editing .......................... 36
Sound field program registration ................... 21
Sound selection key, remote control ................ 7
Sound setup, setup menu ............................... 41
SOURCE POWER, remote control ................. 7
SP IMP., advanced setup ............................... 45
Speaker cable connection .............................. 12
Speaker connection ........................................ 11
Speaker impedance, advanced setup ............. 45
Speaker indicator, front panel display ............. 6
Speaker layout ............................................... 10
Speaker placement ......................................... 10
Speaker setup ................................................. 39
SPEAKERS terminal, rear panel ..................... 5
Specifications ................................................ 56
Spectacle, sound field program ..................... 24
Sports, sound field program .......................... 25
SR Level, sound field parameter ................... 36
Standard, sound field program ....................... 24
Standby, 1 HDMI, function setup .................. 42
STANDBY/ON, front panel ............................ 4
Straight decoding mode ................................. 27
Straight Enhancer, sound field program ........ 26
STRAIGHT, front panel .................................. 4
Subwoofer ...................................................... 10
Subwoofer Phase, A)Config,
speaker setup ............................................. 40
Sur. B, A)Config, speaker setup .................... 40
Sur. L, C)Distance, speaker setup .................. 41
Sur. LR, A)Config, speaker setup .................. 40
Sur. R, C)Distance, speaker setup ................. 41
Sur.B L, C)Distance, speaker setup ............... 41
Sur.B R, C)Distance, speaker setup ............... 41
Surround back left speaker ............................ 10
Surround back right speaker .......................... 10
Surround back speaker ................................... 10
Surround decoder editing ............................... 36
Surround left speaker ..................................... 10
Surround right speaker ................................... 10
SWFR, C)Distance, speaker setup ................. 41

■

V

VIDEO jack ....................................................13
Video jack ......................................................13
VIDEO jack, front panel ..................................4
Video/audio jack ............................................13
Virtual CINEMA DSP ...................................27
VOLUME +/–, remote control .........................7
VOLUME control, front panel .........................4
VOLUME indicator, front panel display .........6
Volume Trim, OPTION menu .......................33

■

Y

YPAO .............................................................18
YPAO, troubleshooting ..................................51

T

The Bottom Line, sound field program ......... 25
The Roxy Theatre, sound field program ........ 25
Tone control ................................................... 22
TONE CONTROL, front panel ....................... 4
TRANSMIT, remote control ........................... 7
Troubleshooting ............................................. 46
Tuner indicator, front panel display ................ 6
Tuner key, remote control ............................... 7
Tuner, troubleshooting .................................. 49
TUNING l / h, front panel .......................... 4
Tuning, AM ................................................... 28
Tuning, FM .................................................... 28
Turning off ..................................................... 17
Turning on ..................................................... 17
TV control key, remote control ....................... 7
TV monitor connection .................................. 14

■

■

U

Using the remote control ................................. 9

58 En

“ASTANDBY/ON” or
“fPOWER” (example) indicates
the name of the parts on the front
panel or the remote control. Refer
to “Part names and functions” on
page 4.

List of remote control codes

TV
A.R. Systems
Acme
Acura
ADC
Admiral

0274
0260
0261, 0273
0259
0100, 0224, 0257,
0258, 0259, 0264,
0265
Advent
0204
Adventura
0107
Adyson
0260, 0327, 0328
Agashi
0327, 0328
Agazi
0259
Aiko
0260, 0261, 0273,
0274, 0327, 0328
Aim
0274
Aiwa
0028, 0297
Akai
0063, 0096, 0101,
0205, 0231, 0261,
0262, 0268, 0271,
0273, 0274, 0327,
0328
Akiba
0262, 0274
Akura
0259, 0262, 0273,
0274
Alaron
0327
Alba
0243, 0260, 0261,
0262, 0266, 0269,
0271, 0273, 0274,
0294, 0300, 0327
Albatron
0222
Alcyon
0249
Alleron
0105
Allorgan
0328
Allstar
0268, 0274
America Action 0225
AMOi
0326
Amplivision
0243, 0260, 0275,
0328
Amstrad
0259, 0261, 0262,
0273, 0274
Amtron
0104
Anam
0225, 0261
Anam National 0102, 0104
Anglo
0261, 0273
Anitech
0249, 0259, 0261,
0273, 0274
Ansonic
0243, 0250, 0261,
0263, 0273, 0274
AOC
0072, 0090, 0096,
0103
Apex
0061, 0117, 0139
Arcam
0327, 0328
Arcam Delta
0260
Aristona
0268, 0271, 0274
Arthur Martin 0275
ASA
0257, 0265
Asberg
0249, 0268, 0274
Astra
0261
Asuka
0259, 0260, 0262,
0327, 0328
Atlantic
0260, 0268, 0271,
0274, 0327
Atori
0261, 0273
Auchan
0275
Audiosonic
0243, 0260, 0261,
0262, 0268, 0271,
0274, 0328
AudioTon
0243, 0260, 0328
Audiovox
0104, 0144, 0225

Ausind
Autovox
Aventura
Awa
Axion
Baird
Bang & Olufsen
Basic Line
Bastide
Baur
Bazin
Beko

Belcor
Bell & Howell
Benq
Beon
Best
Bestar
Binatone
Blue Sky
Blue Star
Boots
BPL
Bradford
Brandt
Brillian
Brinkmann
Brionvega
Britannia
Brockwood
Broksonic
Bruns
BTC
Bush

Candle
Capsonic
Carena
Carnivale
Carrefour
Carver
Cascade
Casio
Cathay
CCE
Celebrity
Celera
Centurion
Century
CGE
Changhong
Chimei
Cimline
Citizen
City
Clarion
Clarivox

0249
0249, 0257, 0259,
0260, 0328
0097
0327, 0328
0206
0328
0230, 0257
0261, 0262, 0268,
0273, 0274, 0328
0260, 0328
0271, 0274
0328
0243, 0269, 0274,
0282, 0351, 0357,
0372, 0380
0090
0065, 0100
0051, 0160, 0315
0268, 0271, 0274
0243
0243, 0268, 0274
0260, 0328
0262, 0274
0270
0260, 0328
0270, 0274
0104, 0225
0267, 0272
0228
0274
0257, 0268, 0271,
0274
0260, 0327, 0328
0090
0063, 0225
0257
0262
0261, 0262, 0264,
0266, 0268, 0270,
0271, 0273, 0274,
0282, 0286, 0294,
0300, 0328, 0329,
0351, 0388, 0394,
0413
0072, 0090, 0096,
0107
0259
0274
0096
0266
0088
0261, 0273, 0274
0317
0268, 0271, 0274
0229, 0328
0057, 0101
0117
0268, 0271, 0274
0257
0243, 0249
0117
0323
0261, 0273
0072, 0085, 0090,
0096, 0104
0261, 0273
0225
0271

Clatronic

0243, 0249, 0259,
0260, 0261, 0262,
0268, 0269, 0273,
0274, 0328
CMS
0327
CMS Hightec 0328
Coby
0151
Colortyme
0072, 0090
Commercial Solutions
0071
Concerto
0072, 0090
Concorde
0261, 0273
Condor
0243, 0260, 0268,
0269, 0273, 0274,
0327
Contec
0225, 0260, 0261,
0266, 0273, 0327
Contec/Cony 0094, 0104
Continental Edison
0267
Cosmel
0261, 0273
Craig
0104, 0225
Crosley
0088, 0119, 0249,
0257
Crown
0104, 0225, 0243,
0249, 0261, 0268,
0269, 0271, 0273,
0274
CS Electronics 0260, 0262, 0327
CTC Clatronic 0263
CTX
0159
Curtis Mathes 0065, 0071, 0072,
0085, 0088, 0090,
0096, 0099, 0224
CXC
0104, 0225
Cybertron
0262
Cytron
0202
Daewoo
0072, 0085, 0090,
0103, 0119, 0245,
0260, 0261, 0268,
0273, 0274, 0281,
0285, 0303, 0321,
0327, 0328, 0344,
0361, 0387
Dainichi
0262, 0327
Dansai
0259, 0268, 0271,
0274, 0327, 0328
Dantax
0243, 0271
Dawa
0274
Daytron
0072, 0085, 0090,
0261, 0273
De Graaf
0264
Decca
0260, 0268, 0271,
0274, 0328
Dell
0167, 0195
Denver
0308, 0312
Desmet
0268, 0271, 0274
Diamant
0274
Diamond
0327
DiamondVision 0213, 0221
Dimensia
0099
Disney
0137
Dixi
0261, 0268, 0271,
0273, 0274, 0328
Dream Vision 0415, 0416
DTS
0261, 0273
Dual
0260, 0274, 0328
Dual-Tec
0260, 0261
Dumont
0076, 0090, 0108,
0257, 0260, 0263,
0328

Durabrand

0077, 0097, 0133,
0225
Dux
0271
Dwin
0224
Dynatron
0268, 0271, 0274
Dynex
0181, 0182
Elbe
0243, 0250, 0274,
0328
Elcit
0257
Electa
0270
ELECTRO TECH 0261
Electroband
0057, 0101
Electrograph
0226
Electrohome
0072, 0090, 0101,
0102
Element
0180
Elin
0260, 0268, 0271,
0273, 0274, 0327
Elite
0262, 0268, 0274
Elman
0263
Elta
0261, 0273, 0327
Emerson
0065, 0072, 0077,
0082, 0085, 0090,
0094, 0095, 0097,
0104, 0105, 0119,
0225, 0243, 0257,
0274
Emprex
0200
Envision
0072, 0090, 0096
Epson
0156, 0201, 0309
Erres
0268, 0271, 0274
ESA
0097
ESC
0328
Etron
0261
Eurofeel
0328
Euro-Feel
0259
Euroline
0271
Euroman
0243, 0327, 0328
Euromann
0259, 0260, 0268,
0274
Europhon
0260, 0263, 0268,
0274, 0327, 0328
Expert
0275
Exquisit
0274
Fenner
0261, 0273
Ferguson
0267, 0271, 0272
Fidelity
0260, 0264, 0274,
0327
Filsai
0328
Finlandia
0264
Finlux
0249, 0257, 0260,
0263, 0268, 0271,
0274, 0328
FIRST LINE 0260, 0261, 0268
Firstline
0273, 0274, 0327,
0328
Fisher
0065, 0243, 0257,
0260, 0266, 0269,
0328
Flint
0268, 0274
Formenti
0249, 0257, 0258,
0260, 0271, 0327
Formenti/Phoenix 0327
Fortress
0257, 0258
Fraba
0243, 0274
Friac
0243
Frontech
0259, 0261, 0264,
0265, 0273, 0328
Fujitsu
0023, 0024, 0025,
0105, 0328
Fujitsu General 0328

i

Fujitsu Siemens 0425, 0426, 0427,
0428, 0429
Funai
0033, 0034, 0035,
0036, 0037, 0097,
0104, 0105, 0225,
0259
Futuretech
0104, 0225
Galaxi
0269, 0274
Galaxis
0243, 0274
Gateway
0163, 0226, 0227
GBC
0261, 0266, 0273
GE
0069, 0071, 0072,
0073, 0077, 0090,
0099, 0102, 0106,
0112, 0131
Geant Casino 0275
GEC
0260, 0265, 0268,
0271, 0274, 0328
Geloso
0261, 0264, 0273
General Technic 0261, 0273
Genexxa
0262, 0265, 0268,
0274
GFM
0177, 0210
Giant
0328
Gibralter
0076, 0090, 0096,
0108
GoldHand
0327
Goldline
0274
GoldStar
0072, 0077, 0085,
0090, 0094, 0096,
0103, 0243, 0260,
0261, 0264, 0268,
0271, 0273, 0274,
0327, 0328
Goodmans
0164, 0259, 0261,
0266, 0268, 0271,
0273, 0274, 0322,
0328, 0395, 0399,
0412
Gorenje
0243, 0269
GPM
0262
GPX
0211
Gradiente
0162
Graetz
0265
Granada
0249, 0260, 0264,
0266, 0268, 0271,
0274, 0275, 0328
Grandin
0261, 0262, 0270,
0271
Gronic
0328
Grundig
0242, 0243, 0249,
0274, 0356
Grunpy
0104, 0105, 0225
Haier
0187, 0207
Halifax
0259, 0260, 0327,
0328
Hallmark
0072, 0077, 0090
Hampton
0260, 0327, 0328
Hanseatic
0243, 0250, 0260,
0261, 0266, 0268,
0271, 0273, 0274,
0328
Hantarex
0261, 0273, 0274
Hantor
0274
Harman/Kardon
0088
Harvard
0104, 0225
Harwood
0273, 0274
Havermy
0224
HCM
0259, 0260, 0261,
0270, 0273, 0274,
0328
Hema
0273, 0328
Hewlett Packard 0146
Higashi
0327
HiLine
0274

ii

Hinari

Hisawa
Hisense
Hitachi

Hornyphon
Hoshai
Huanyu
Hygashi
Hyper
Hypson

Hyundai
Iberia
ICE

ICeS
Ilo
IMA
Imperial
Indiana
Infinity
InFocus
Ingelen
Ingersol
Initial
Inno Hit

Innovation
Insignia
Inteq
Interactive
Interbuy
Interfunk
International
Intervision
Irradio

Isukai
ITC
ITS
ITT
ITV
Janeil
JBL
JC Penney

JCB
Jensen
JVC

0261, 0262, 0266,
0268, 0271, 0273,
0274
0262, 0270, 0275
0165
0006, 0014, 0015,
0016, 0042, 0072,
0090, 0094, 0173,
0254, 0255, 0256,
0260, 0264, 0265,
0266, 0274, 0285,
0300, 0319, 0328,
0348, 0349, 0385,
0402, 0410
0268, 0274
0262
0260, 0327
0260, 0327, 0328
0260, 0261, 0273,
0327, 0328
0259, 0260, 0268,
0270, 0271, 0274,
0275, 0328
0223
0274
0259, 0260, 0261,
0262, 0268, 0273,
0274, 0327, 0328
0327
0198, 0203
0104
0243, 0249, 0265,
0268, 0269, 0274
0268, 0271, 0274
0088
0168, 0277, 0313,
0397, 0430
0265
0261, 0273
0203
0249, 0260, 0261,
0262, 0268, 0271,
0273, 0274, 0328
0259, 0261
0182, 0188, 0190,
0209
0076
0243
0261, 0273
0243, 0257, 0265,
0268, 0271, 0274
0327
0243, 0259, 0260,
0263, 0274, 0328
0249, 0261, 0262,
0268, 0271, 0273,
0274
0262, 0274
0260, 0328
0262, 0268, 0270,
0274, 0327
0261, 0265
0261, 0271, 0274
0107
0088
0072, 0073, 0085,
0090, 0099, 0103,
0106
0057, 0101
0072, 0090
0017, 0018, 0019,
0092, 0093, 0094,
0106, 0251, 0252,
0266, 0268, 0293,
0360, 0379

Kaisui

Kamosonic
Kamp
Kapsch
Karcher
Kawasho
KEC
Kendo
Kenwood
KIC
Kingsley
KLH
Kloss Novabeam
Kneissel
Kolster
Konka
Korpel
Korting
Kosmos
Koyoda
KTV

Kyoto
Lasat
Lenco
Lenoir
Leyco
LG

LG/GoldStar
Liesenk
Liesenkotter
Life
Lifetec
Lloyds
Loewe
Loewe Opta
Logik
Luma
Lumatron
Lux May
Luxman
Luxor
LXI

M Electronic
MAG
Magnadyne
Magnafon

0260, 0261, 0262,
0270, 0273, 0274,
0327, 0328
0260
0260, 0327
0265
0243, 0260, 0261,
0271, 0274
0072, 0090, 0101,
0327
0225
0243, 0263, 0264,
0274
0072, 0090, 0096
0328
0260, 0327
0117
0104, 0107
0243, 0250, 0274
0268, 0274
0262
0268, 0271, 0274
0243, 0257
0274
0261
0085, 0096, 0104,
0225, 0229, 0260,
0328
0327, 0328
0243
0261, 0273
0260, 0261, 0273
0259, 0268, 0271,
0274
0016, 0038, 0039,
0077, 0103, 0145,
0222, 0243, 0246,
0253, 0260, 0261,
0264, 0268, 0271,
0273, 0274, 0282,
0290, 0299, 0316,
0327, 0328, 0351,
0359, 0367, 0382,
0384, 0389, 0396
0246
0271
0274
0259, 0261
0259, 0261, 0273,
0274
0273
0243, 0250, 0274,
0280, 0306, 0347
0257, 0268, 0271
0100
0264, 0271, 0273,
0274
0264, 0268, 0271,
0274, 0328
0268
0072, 0090
0260, 0264, 0328
0061, 0065, 0071,
0072, 0073, 0077,
0088, 0099
0260, 0261, 0265,
0267, 0268, 0271
0050
0257, 0263, 0271
0249, 0260, 0263,
0327

Magnavox

0072, 0088, 0090,
0091, 0095, 0096,
0098, 0114, 0115,
0129, 0134, 0176,
0178, 0189, 0210
Magnum
0259, 0261
Majestic
0100
Mandor
0259
Manesth
0259, 0260, 0268,
0271, 0274, 0328
Marantz
0072, 0088, 0090,
0096, 0158, 0268,
0271, 0274
Marelli
0257
Mark
0268, 0271, 0273,
0274, 0327, 0328
Masuda
0328
Matsui
0260, 0261, 0264,
0266, 0268, 0271,
0273, 0274, 0328,
0405
Matsushita
0067
Maxent
0193, 0226
Mediator
0268, 0271, 0274
Medion
0259, 0261, 0274
Megapower
0222
Megatron
0072, 0077
MElectronic
0273, 0274, 0327,
0328
Melvox
0275
Memorex
0065, 0072, 0077,
0100, 0103, 0133,
0219, 0261, 0273
Memphis
0261, 0273
Mercury
0273, 0274
Metz
0257
MGA
0072, 0077, 0090,
0096, 0103
Micromaxx
0259, 0261
Microstar
0259, 0261
Midland
0069, 0071, 0073,
0076, 0085, 0106,
0108
Minerva
0249
Minoka
0268, 0274
Mintek
0203
Mitsubishi
0006, 0015, 0016,
0048, 0072, 0077,
0090, 0103, 0196,
0224, 0257, 0266,
0268, 0274, 0298,
0371
Mivar
0243, 0249, 0250,
0260, 0327, 0328
Monivision
0222
Montgomery Ward
0100
Motion
0249
Motorola
0102, 0224
MTC
0072, 0090, 0096,
0103, 0243, 0327
Multi System 0271
Multitech
0104, 0225, 0229,
0243, 0260, 0261,
0263, 0264, 0266,
0271, 0273, 0274,
0327, 0328
Murphy
0260, 0327
NAD
0061, 0072, 0077
Naonis
0264
NEC
0026, 0053, 0072,
0090, 0096, 0102,
0103, 0266, 0328

Neckermann

NEI
Net-TV
Neufunk
New Tech
New World
NewTech
Nicamagic
Nikkai

Nikko
Nobliko
Nokia
Norcent
Nordic
Nordmende
Nordvision
Novatronic
Oceanic
Okano
Olevia
ONCEAS
Onwa
Opera
Oppo
Optimus
Optoma
Optonica
Orbit
Orion

Orline
Osaki
Oso
Otto Versand

Pael
Palladium
Palsonic
Panama

Panasonic

Panavision
Pathe Cinema
Pausa
Penney
Perdio
Perfekt
Philco

Philharmonic
Philips

0243, 0257, 0260,
0264, 0268, 0269,
0271, 0274, 0328
0268, 0271, 0274
0226
0273, 0274
0261, 0268
0262
0273, 0274, 0328
0260, 0327
0259, 0260, 0262,
0268, 0271, 0273,
0274, 0327, 0328
0072, 0077, 0096
0249, 0260, 0263,
0327
0265
0155
0328
0257, 0265, 0267,
0268
0271
0274
0265, 0275
0243, 0269, 0274
0052, 0140, 0149,
0154, 0157
0260
0104, 0225
0274
0208
0065, 0067
0194
0224
0268, 0274
0121, 0192, 0261,
0268, 0271, 0273,
0274, 0282, 0329
0274
0259, 0260, 0262,
0274, 0328
0262
0258, 0260, 0266,
0268, 0270, 0271,
0274, 0328
0260, 0327
0243, 0260, 0269,
0274, 0328
0328
0259, 0260, 0261,
0273, 0274, 0327,
0328
0006, 0007, 0066,
0067, 0068, 0069,
0070, 0102, 0106,
0113, 0147, 0215,
0241, 0265, 0274,
0279, 0310, 0332,
0334, 0368, 0374
0274
0243, 0250, 0260,
0275, 0327
0261, 0273
0061, 0069, 0071,
0077, 0096
0274, 0327
0274
0072, 0088, 0090,
0091, 0094, 0096,
0102, 0103, 0243,
0249, 0257, 0274
0260, 0328
0040, 0088, 0089,
0090, 0091, 0094,
0098, 0099, 0102,

0114, 0135, 0143,
0176, 0178, 0189,
0210, 0212, 0232,
0233, 0257, 0260,
0268, 0271, 0274,
0278, 0287, 0301,
0302, 0307, 0311,
0314, 0330, 0331,
0333, 0337, 0338,
0339, 0341, 0343,
0345, 0355, 0363,
0365, 0377, 0378,
0381, 0383, 0406,
0409, 0414
Philips Magnavox 0089, 0114, 0115
Phoenix
0243, 0257, 0268,
0271, 0274, 0327
Phonola
0257, 0268, 0271,
0274, 0327
Pilot
0085, 0090, 0096
Pioneer
0012, 0013, 0072,
0090, 0243, 0265,
0267, 0268, 0271,
0274, 0408
Plantron
0259, 0268, 0273,
0274
Playsonic
0328
Polaroid
0117, 0152, 0184,
0220
Poppy
0261, 0273
Portland
0072, 0085, 0090,
0103
Prandoni-Prince
0249, 0264
Precision
0260, 0328
Prima
0161, 0207, 0261,
0265, 0273
Princeton
0222
Prism
0069, 0106
Profex
0261, 0273
Profi-Tronic
0268, 0274
Proline
0268, 0274
Proscan
0071, 0073, 0099
Prosonic
0243, 0260, 0271,
0274, 0327, 0328
Protech
0259, 0260, 0261,
0263, 0268, 0271,
0328
Proton
0072, 0077, 0090,
0094
Protron
0150
PROVIEW
0050, 0164
Provision
0271, 0274
Pulsar
0076, 0090, 0108
Pye
0268, 0271, 0274,
0296, 0338
Pymi
0261, 0273
Quandra Vision
0275
Quasar
0067, 0069, 0102,
0106
Quelle
0259, 0260, 0268,
0271, 0274, 0328
Questa
0266
Radialva
0274
RadioShack
0065, 0071, 0077,
0096, 0225, 0274
RadioShack/Realistic
0072, 0085, 0090,
0094, 0099, 0104
Radiola
0268, 0271, 0274,
0328
Radiomarelli
0257, 0274
Radiotone
0243, 0268, 0273,
0274
Rank
0266

RCA

Realistic
Recor
Redstar
Reflex
Revox
Rex
RFT
Rhapsody
R-Line
Roadstar
Robotron
Rowa
Royal Lux
RTF
Runco
Saba
Saisho
Salora
Sambers
Sampo
Samsung

Sandra
Sansui
Sanyo

SBR
Sceptre
Schaub Lorenz
Schneider

Scotch
Scott

Sears

SEG

SEI

0071, 0072, 0073,
0074, 0075, 0090,
0099, 0102, 0103,
0109, 0120, 0179,
0218
0065, 0077, 0096,
0225
0274
0274
0274
0243, 0268, 0271,
0274
0259, 0264, 0265
0243, 0250, 0257
0327
0268, 0271, 0274
0259, 0261, 0262,
0273
0257
0327, 0328
0243
0257
0076, 0096, 0108
0257, 0265, 0267,
0272, 0376
0259, 0260, 0261,
0273, 0328
0264, 0265
0249, 0263
0072, 0085, 0090,
0096, 0226
0029, 0030, 0031,
0032, 0044, 0045,
0046, 0047, 0072,
0077, 0084, 0085,
0086, 0087, 0090,
0094, 0096, 0103,
0118, 0217, 0229,
0235, 0236, 0237,
0243, 0259, 0260,
0261, 0268, 0269,
0271, 0273, 0274,
0284, 0295, 0327,
0328, 0336, 0346,
0390, 0407
0260, 0327, 0328
0063, 0121, 0268,
0274
0020, 0021, 0022,
0049, 0065, 0090,
0141, 0191, 0243,
0250, 0260, 0266,
0273, 0291, 0327,
0328, 0370, 0373,
0391
0271, 0274
0166, 0185
0265
0260, 0262, 0268,
0271, 0274, 0287,
0300, 0328, 0364,
0366
0072, 0077
0072, 0077, 0090,
0094, 0104, 0105,
0199, 0225
0061, 0065, 0071,
0072, 0073, 0077,
0088, 0090, 0097,
0099, 0105
0259, 0260, 0263,
0266, 0271, 0273,
0274, 0300, 0327,
0328
0274

SEI-Sinudyne
Seleco
Sencora
Sentra
Serino
Sharp

Sheng Chia
Shogun
Siarem
Sierra
Siesta
Signature
Silva
Silver
Singer
Sinudyne
Skantic
Solavox
Sonitron
Sonoko

Sonolor
Sontec
Sony

Sound & Vision
Soundesign
Soundwave
Squareview
SSS
Standard

Starlite
Stenway
Stern
Strato
Stylandia
Sunkai
Sunstar
Sunwood
Superla
Superscan
SuperTech
Supra
Supre-Macy
Supreme
Susumu
Sutron
SVA
Sydney

0257, 0263, 0265
0264, 0265, 0266
0261, 0273
0273
0327
0009, 0010, 0011,
0072, 0080, 0081,
0082, 0083, 0085,
0090, 0094, 0110,
0148, 0183, 0216,
0224, 0247, 0248,
0258, 0266, 0288,
0304, 0324, 0325,
0340, 0358, 0362,
0369, 0386, 0392,
0398, 0400, 0401,
0403
0224
0090
0257, 0263, 0274
0268, 0274
0243
0100
0327
0266
0257, 0263, 0275
0257, 0263, 0271,
0274
0265
0265
0243, 0328
0259, 0260, 0261,
0268, 0271, 0273,
0274, 0328
0265, 0275
0243, 0268, 0271,
0274
0041, 0057, 0058,
0059, 0060, 0101,
0116, 0125, 0126,
0127, 0142, 0169,
0170, 0171, 0172,
0174, 0234, 0261,
0266, 0276, 0289,
0292, 0393, 0411
0262, 0263
0072, 0077, 0090,
0104, 0105, 0225
0268, 0271, 0274
0097
0090, 0104, 0225
0260, 0261, 0262,
0268, 0273, 0274,
0328
0104, 0225, 0271,
0273, 0274
0270
0264, 0265
0273, 0274
0328
0261
0273, 0274
0261, 0268, 0273,
0274
0260, 0327, 0328
0095, 0224
0273, 0274, 0327
0261, 0273
0107
0057, 0101
0262
0261, 0273
0197
0260, 0327, 0328

iii

Sylvania

Symphonic
Syntax
Syntax-Brillian
Sysline
Sytong
Tandy
Tashiko
Tatung

TCM
Teac
Tec
Technics
TechniSat
Techwood
TEDELEX
Teknika

Teleavia
Telecor
Telefunken
Telegazi
Telemeister
Telesonic
Telestar
Teletech
Teleton
Televideon
Televiso
Tensai
Tesmet
Tevion
Texet
Thomson

Thorn
TMK
TNCi
Tokai
Tokyo
Tomashi
Toshiba

Totevision
Towada
Trakton
Trans Continens
Transtec
Trident

iv

0072, 0088, 0089,
0090, 0091, 0095,
0096, 0097, 0098,
0175, 0177, 0210
0097, 0104, 0108,
0133, 0210, 0225
0149
0149
0271
0327
0224, 0258, 0260,
0262, 0265, 0328
0260, 0264, 0266,
0327, 0328
0102, 0227, 0260,
0268, 0271, 0274,
0328
0259, 0261
0274, 0328
0260, 0261, 0273,
0328
0067, 0069, 0106
0320, 0417, 0418,
0419
0069, 0072, 0090,
0106
0328
0072, 0085, 0088,
0090, 0094, 0100,
0103, 0104, 0105,
0225
0267
0274, 0328
0267, 0268, 0272,
0274
0274
0274
0274
0274
0261, 0271, 0273,
0274
0260, 0328
0327
0275
0261, 0262, 0268,
0273, 0274, 0328
0268
0259, 0261
0260, 0273, 0327,
0328
0238, 0239, 0240,
0260, 0267, 0268,
0272, 0274, 0335
0271, 0274
0072, 0077, 0090
0076
0268, 0274, 0328
0260, 0327
0270
0027, 0043, 0053,
0054, 0061, 0062,
0063, 0064, 0065,
0122, 0123, 0124,
0128, 0130, 0132,
0139, 0214, 0244,
0266, 0283, 0305,
0328, 0329, 0342,
0350, 0352, 0353,
0354, 0375, 0404
0085
0265, 0328
0328
0274, 0328
0327
0328

Triumph
Uher

0274
0243, 0249, 0265,
0268, 0274
Ultravox
0257, 0260, 0263,
0274, 0327
Unic Line
0274
United
0271
Universum
0243, 0249, 0259,
0268, 0269, 0271,
0274, 0328
Univox
0274
Vector Research
0096
Vestel
0264, 0265, 0268,
0269, 0271, 0274,
0328
Vexa
0261, 0271, 0273,
0274
Victor
0093, 0266, 0268
VIDEOLOGIC 0327
Videologique 0260, 0262, 0327,
0328
VideoSystem 0268, 0274
Videotechnic 0327, 0328
Vidikron
0088
Vidtech
0072, 0077, 0090,
0103
Viewsonic
0153, 0186, 0226,
0318
Viking
0107
Viore
0198
Visiola
0260, 0327
Vision
0268, 0274, 0328
Vizio
0090, 0136, 0160,
0227, 0420, 0421,
0422, 0423, 0424
Vortec
0268, 0271, 0274
Voxson
0249, 0257, 0264,
0265, 0268, 0274
Waltham
0260, 0274, 0328
Wards
0072, 0077, 0088,
0090, 0091, 0096,
0098, 0099, 0100,
0103, 0105
Watson
0268, 0271, 0274
Watt Radio
0260, 0263, 0327
Waycon
0061
Wega
0257, 0266, 0274
Wegavox
0273
Weltblick
0268, 0271, 0274,
0328
Westinghouse 0057, 0138, 0142
White Westinghouse
0008, 0119, 0260,
0263, 0271, 0274,
0327
Wincom
0055, 0056
Xrypton
0274
Yamaha
0000, 0001, 0002,
0003, 0004, 0005,
0072, 0090, 0096,
0103
Yamishi
0274, 0328
Yokan
0274
Yoko
0243, 0259, 0260,
0261, 0262, 0268,
0271, 0273, 0274,
0327, 0328
Yorx
0262
Zanussi
0264, 0328
Zenith
0076, 0077, 0078,
0079, 0090, 0100,
0108, 0111

VCR
ABS

1066

Adventura
Adyson
Aiwa

1023
1090
1023, 1072, 1073,
1074
Akai
1071, 1073
Akiba
1079, 1090
Akura
1073, 1079, 1090
Alba
1074, 1075, 1076,
1079, 1090, 1091
Alienware
1066
Ambassador
1076
American High 1022
Amstrad
1072, 1090, 1091
Anitech
1079, 1090
Apex
1010
ASA
1077, 1078
Asha
1020
Asuka
1072, 1077, 1078,
1079, 1090
Audio Dynamics 1018
Audiosonic
1091
Audiovox
1021
Baird
1072, 1073, 1075,
1091
Bang & Olufsen 1067
Basic Line
1074, 1075, 1076,
1079, 1090, 1091
Baur
1078
Beaumark
1020
Bell & Howell 1019
Bestar
1075, 1076, 1091
Black Panther Line
1075, 1091
Blaupunkt
1078
Bondstec
1076, 1090
Broksonic
1054
Bush
1074, 1075, 1079,
1090, 1091, 1097,
1099, 1109, 1139
Calix
1021
Candle
1020, 1021
Canon
1022
Cathay
1091
Catron
1076
CGE
1072, 1073
Cimline
1074, 1079, 1090
CineVision
1058
Citizen
1020, 1021
Clatronic
1076, 1090
Colortyme
1018
Condor
1075, 1076, 1091
Craig
1020, 1021
Crown
1075, 1076, 1079,
1090, 1091
Curtis Mathes 1018, 1020, 1022
Cybernex
1020
CyberPower
1066
Daewoo
1023, 1075, 1076,
1091, 1116, 1141
Dansai
1079, 1090, 1091
Dantax
1074
Daytron
1075, 1091
DBX
1018
De Graaf
1078
Decca
1072, 1073, 1078
Dell
1066
Denko
1090
DiamondVision 1050
DigiFusion
1092
DIRECTV
1035, 1038, 1040,
1059, 1060, 1061,
1065
Dish Network 1064
Dishpro
1064
Dual
1073, 1078, 1091

Dumont
Durabrand
Dynatech
Echostar
Elbe
Elcatech
Electrohome
Electrophonic
Elsay
Elta
Emerson

1072, 1078
1032
1023
1064
1091
1090
1021
1021
1090
1079, 1090, 1091
1021, 1022, 1023,
1070, 1090
ESC
1075, 1091
Etzuko
1079, 1090
Expressvu
1064
Ferguson
1073
Fidelity
1072, 1090
Finlandia
1078
Finlux
1072, 1073, 1078
Firstline
1074, 1077, 1079,
1090
Fisher
1019
Flint
1074
Formenti/Phoenix 1078
Frontech
1076
Fuji
1022
Fujitsu
1072
Funai
1023, 1072
Galaxy
1072
Garrard
1023
Gateway
1066
GBC
1076, 1079
GE
1020, 1022
GEC
1078
Geloso
1079
General
1076
General Technic 1074
GOI
1064
GoldHand
1079, 1090
Goldstar
1018, 1021, 1072,
1077
Goodmans
1072, 1075, 1076,
1077, 1079, 1090,
1091
Gradiente
1023
Graetz
1073
Granada
1078
Grandin
1072, 1075, 1076,
1077, 1079, 1090,
1091
Grundig
1078, 1079
Hanseatic
1077, 1078, 1091
Harley Davidson 1023
Harman/Kardon
1018
Harwood
1090
HCM
1079, 1090
Headquarter
1019
Hewlett Packard 1066
Hinari
1074, 1079, 1090,
1091
Hisawa
1074
Hitachi
1072, 1073, 1078,
1089, 1108, 1124
HNS
1060
Howard Computers
1066
HP
1066
HTS
1064
Hughes
1035, 1040, 1061
Hughes Network Systems
1038, 1060
Humax
1035, 1060, 1094
Hush
1066
Hypson
1074, 1079, 1090,
1091

iBUYPOWER
Impego
Imperial
Inno Hit

1066
1076
1072
1075, 1076, 1078,
1079, 1090, 1091
Innovation
1074
Instant Replay 1022
Interbuy
1077, 1090
Interfunk
1078
Intervision
1072, 1091
Irradio
1077, 1079, 1090
ITT
1073
ITV
1075, 1077, 1091
JC Penney
1018, 1019, 1020,
1021, 1022
JCL
1022
JVC
1011, 1012, 1013,
1014, 1015, 1016,
1017, 1018, 1019,
1028, 1035, 1064,
1073, 1085, 1117,
1130, 1131, 1133,
1134, 1135, 1136
Kaisui
1079, 1090
Karcher
1078
Kendo
1074, 1075, 1076,
1090
Kenwood
1018, 1019, 1073
Kodak
1021, 1022
Korpel
1079, 1090
Kyoto
1090
Lenco
1075
Leyco
1079, 1090
LG
1021, 1053, 1072,
1077, 1088, 1100,
1106, 1125, 1143
Lifetec
1074
Linksys
1066
Lloyd’s
1023
Loewe Opta
1077, 1078
Logik
1079, 1090
Lumatron
1075, 1091
Luxor
1090
LXI
1021
M Electronic 1072
Magnavox
1022, 1032, 1044,
1070
Magnin
1021
Manesth
1079, 1090
Marantz
1018, 1019, 1022,
1078
Mark
1091
Marta
1021
Matsui
1074, 1077
Matsushita
1022
Media Center PC 1066
Mediator
1078
Medion
1074
MEI
1022
Memorex
1019, 1020, 1021,
1022, 1023, 1032,
1048, 1069, 1072,
1077
Memphis
1079, 1090
MGN Technology 1020
Micromaxx
1074
Microsoft
1066
Microstar
1074
Migros
1072
Mind
1066
Mitsubishi
1029, 1072, 1078
Motorola
1022
MTC
1020

Multitech

1020, 1023, 1072,
1076, 1078, 1079,
1090
Murphy
1072
NEC
1018, 1019, 1073
Neckermann
1073, 1078
NEI
1078
Nesco
1079, 1090
Nikkai
1076, 1090, 1091
Nikko
1021
Niveus Media 1066
Noblex
1020
Nokia
1073, 1091
Nordmende
1073
Northgate
1066
Oceanic
1072, 1073
Okano
1074, 1090, 1091
Olympus
1022
Optimus
1021
Orion
1033, 1069, 1074,
1097, 1139
Orson
1072
Osaki
1072, 1077, 1079,
1090
Otto Versand 1078
Palladium
1073, 1077, 1079,
1090
Panasonic
1007, 1008, 1009,
1022, 1026, 1042,
1043, 1068, 1082,
1101, 1126, 1132
Pathe Marconi 1073
Perdio
1072
Philco
1022, 1090
Philips
1022, 1030, 1035,
1038, 1039, 1040,
1044, 1055, 1060,
1078, 1084, 1095,
1096, 1104, 1105,
1111, 1113, 1122,
1124, 1127, 1128,
1129
Philips Magnavox 1030
Phonola
1078
Pilot
1021
Pioneer
1078, 1118
Polaroid
1010, 1049
Portland
1075, 1076, 1091
Prinz
1072
Profex
1079
Proline
1072
Proscan
1065
Prosonic
1074, 1091
Pulsar
1032
Pye
1052, 1078
Quarter
1019
Quartz
1019
Quasar
1022
Quelle
1072, 1078
Radialva
1090
RadioShack
1021
RadioShack/Realistic
1019, 1020, 1021,
1022, 1023
Radiola
1078
Radix
1021
Randex
1021
RCA
1020, 1022, 1025,
1035, 1040, 1047,
1060, 1065
Realistic
1019, 1020, 1021,
1022, 1023
ReplayTV
1041, 1068
Rex
1073
RFT
1076, 1078, 1090

Ricavision
Roadstar

1066
1075, 1077, 1079,
1090, 1091
Royal
1090
Runco
1032
Saba
1073
Saisho
1074, 1079
Samsung
1006, 1020, 1038,
1040, 1046, 1060,
1080, 1107, 1110,
1112, 1121, 1123,
1140, 1142
Samurai
1076, 1090
Sanky
1032
Sansui
1033, 1056, 1069,
1073
Sanyo
1019, 1020, 1114
Saville
1091
SBR
1078
Schaub Lorenz 1072, 1073
Schneider
1072, 1074, 1075,
1076, 1077, 1078,
1079, 1090, 1091
Sears
1019, 1021, 1022
SEG
1079, 1090, 1091
SEI-Sinudyne 1078
Seleco
1073
Sentra
1076, 1090
Sentron
1079, 1090
Sharp
1031, 1045, 1057,
1081, 1115, 1137
Shintom
1079, 1090
Shivaki
1077
Shogun
1020
Siemens
1077
Silva
1077
Silver
1091
Singer
1022
Sinudyne
1078
Solavox
1076
Sonic Blue
1041, 1068
Sonneclair
1090
Sonoko
1075, 1091
Sontec
1077
Sony
1000, 1001, 1002,
1003, 1024, 1027,
1036, 1062, 1066,
1083, 1098, 1103,
1138
Stack
1066
Stack 9
1066
Standard
1075, 1091
Stern
1091
STS
1022
Sunkai
1074
Sunstar
1072
Suntronic
1072
Sunwood
1079, 1090
Superscan
1070
Sylvania
1022, 1023, 1044,
1052, 1070
Symphonic
1023, 1044, 1090
Systemax
1066
Tagar Systems 1066
Taisho
1074
Tandberg
1091
Tandy
1019
Tashiko
1021, 1072
Tatung
1072, 1073, 1078
TCM
1074, 1093, 1120
Teac
1023, 1091
Tec
1076, 1090, 1091
Technics
1022
Teknika
1021, 1022, 1023
Teleavia
1073

Telefunken
Teletech
Tenosal
Tensai

1073
1090, 1091
1079, 1090
1072, 1077, 1079,
1090
Tevion
1074
Thomson
1073, 1087
Thorn
1073
Tivo
1035, 1036, 1037,
1039, 1040, 1060,
1061, 1062
TMK
1020
Tokai
1077, 1079, 1090
Tonsai
1079
Toshiba
1004, 1005, 1034,
1051, 1063, 1066,
1073, 1078, 1086,
1099, 1102, 1119,
1144
Totevision
1020, 1021
Touch
1066
Towada
1079, 1090
Towika
1079, 1090
TVA
1076
Uher
1077
UltimateTV
1065
Ultravox
1091
Unitech
1020
United Quick Star 1075, 1091
Universum
1072, 1077, 1078
Vector Research 1018
Video Concepts 1018
Videon
1074
Videosonic
1020
Viewsonic
1066
Voodoo
1066
Wards
1020, 1021, 1022,
1023
Weltblick
1077
XR-1000
1022, 1023
Yamaha
1018, 1019
Yamishi
1079, 1090
Yokan
1079, 1090
Yoko
1076, 1077, 1079,
1090
Zenith
1032
ZT Group
1066

DVD
4Kus
Accurian
Advent
AEG
Airis
Aiwa
Akai

2097
2220
2169, 2201
2312
2318
2272
2170, 2195, 2225,
2227
Akura
2310
Alba
2018, 2232, 2247,
2259, 2264
Alco
2199
Alize
2315
Allegro
2215
Amitech
2312
Amphion MediaWorks
2145
AMW
2145, 2313
Apex
2044, 2045, 2046,
2047, 2076, 2208,
2209
Apple
2163
Arrgo
2216
Asono
2318
Aspire
2140, 2202
Astar
2162

v

ATACOM
Audiovox
Avious
Awa
Axion
Bang & Olufsen
Baze
BBK
Bellagio
Best Buy
Blaupunkt
Blue Parade
Boghe
Brainwave
Brandt
Broksonic
Bush

2318
2111, 2199
2317
2313
2171
2210
2317
2318
2313
2309
2209
2207
2300
2312
2198, 2238
2192, 2195
2018, 2060, 2248,
2264, 2301, 2308,
2317, 2350, 2368
California Audio Labs
2197
Cambridge Audio 2304
CAT
2306, 2307
CAVS
2146
Centrum
2307
CGV
2304, 2312
Changhong
2222
Cinetec
2313
CineVision
2191, 2215
Clatronic
2308, 2317
Coby
2077, 2124, 2314
Conia
2301
Continental Edison
2313
Crown
2312
C-Tech
2305
Curtis Mathes 2217
CVG
2299
CyberHome
2048, 2068, 2216,
2233, 2258
Cytron
2166
Daenyx
2313
Daewoo
2083, 2215, 2280,
2299, 2312, 2313,
2326, 2376
Daewoo International
2313
Dalton
2311
Dansai
2303, 2312
Daytek
2145, 2234, 2313
Dayton
2313
DEC
2308
Decca
2312
Denon
2105, 2147, 2197,
2286
Denver
2288, 2308, 2310,
2314
Denzel
2302
Desay
2159
Diamond
2304, 2305
DiamondVision 2179, 2186
Disney
2078, 2088
DK Digital
2257
Dmtech
2226
Dual
2302
Durabrand
2218
DVX
2305
Easy Home
2309
Eclipse
2304
E-Dem
2318
Electrohome
2312
Elin
2312
Elta
2263, 2312, 2315
Emerson
2196, 2211, 2219
Enterprise
2211

vi

Enzer
Epson
ESA
Finlux
Fintec
Fisher
Funai
Gateway
GE
Gericom
GFM
Giec
Global Solutions
Global Sphere
Go Video
Goodmans

2302
2165
2219
2304, 2312, 2317
2299
2212
2219
2097
2079, 2206, 2209
2269
2176
2300
2305
2305
2135, 2215
2247, 2289, 2298,
2300, 2308, 2330,
2369
GPX
2177
Gradiente
2197
Graetz
2302
Greenhill
2209
Grundig
2271
Grunkel
2312, 2316
GVG
2299
H&B
2308
H_her
2318
Haaz
2304, 2305
Haier
2172
Harman/Kardon
2125, 2213
HiMAX
2309
Hitachi
2008, 2033, 2108,
2302, 2309, 2320,
2366
Hiteker
2208
Home Tech Industries
2318
Hyundai
2316
Ilo
2167
Initial
2167, 2209
Innovation
2228
Insignia
2080, 2175, 2219
Integra
2207
Irradio
2103
iSymphony
2164
JBL
2213
JVC
2049, 2050, 2051,
2052, 2053, 2054,
2055, 2056, 2057,
2070, 2242, 2261,
2275, 2276, 2277,
2278, 2339, 2340,
2341, 2342, 2386,
2387, 2389, 2390,
2391
Jwin
2148
Kansai
2314
Kawasaki
2199
Kennex
2312
Kenwood
2123, 2197, 2270
KeyPlug
2312
Kiiro
2312
Kingavon
2308
Kiss
2302
KLH
2199, 2209
Koda
2308
Koss
2095, 2198, 2204
KXD
2309
Landel
2221
Lasonic
2214
Lawson
2305
Lecson
2303
Lenco
2308, 2312, 2317
Lenoxx
2203, 2218

LG

Life
Lifetec
Limit
Liquid Video
Liteon
Loewe
LogicLab
Magnavox

Magnex
Majestic
Marantz
Marquant
Matsui
McIntosh
Mecotek
Medion
Memorex
MiCO
Micromaxx
Microsoft
Microstar
Minoka
Minowa
Mintek
Mitsubishi
Mizuda
Monyka
Mustek
Mx Onda
Mystral
Naiko
Nesa
Neufunk
Nevir
Next Base
Nexxtech
NU-TEC
Onkyo
Oopla
Oppo
Optim
Optimus
Orava
Orbit
Orion
Oritron
P&B
Pacific
Panasonic

Parasound
peeKTON
Philips

2080, 2107, 2115,
2116, 2141, 2188,
2211, 2215, 2237,
2239, 2285, 2293,
2295, 2348, 2370
2228
2228
2305
2204
2097, 2121, 2220
2274
2305
2075, 2096, 2178,
2180, 2196, 2205,
2219, 2308
2317
2314
2282
2312
2198, 2296
2149
2312
2228
2078, 2184, 2195
2300, 2304
2228
2206
2228
2312
2317
2167, 2209
2081
2308, 2309
2302
2232
2304
2316
2312
2209
2302
2312
2221
2161
2301
2205, 2290
2097
2150, 2173
2303
2230
2308
2313
2027, 2060
2198, 2204
2308
2305
2015, 2016, 2017,
2036, 2037, 2038,
2039, 2040, 2041,
2042, 2043, 2074,
2089, 2104, 2108,
2112, 2120, 2131,
2132, 2197, 2205,
2244, 2245, 2246,
2253, 2254, 2255,
2292, 2321, 2324,
2327, 2328, 2329,
2331, 2383, 2388
2151
2318
2026, 2061, 2062,
2075, 2090, 2094,
2096, 2097, 2103,
2110, 2126, 2180,
2193, 2205, 2231,
2235, 2241, 2251,

Phonotrend
Pioneer

Pointer
Polaroid
Portland
Powerpoint
Prima
Proceed
Proscan
Prosonic
Protron
Provision
Pye
Qwestar
Raite
RCA

RedStar
Regent
Reoc
Rimax
Rio
Roadstar
Ronin
Rotel
Rowa
Rownsonic
Saba
Sabaki
Saivod
Sampo
Samsung

Sansui
Sanyo
ScanMagic
Schaub Lorenz
Schneider
Scientific Labs
Scott
Seeltech
SEG
Sharp

Shinsonic
Sigmatek
Silva
Singer
Skymaster

2252, 2256, 2260,
2268, 2282, 2332,
2333, 2343, 2344,
2345, 2367, 2371,
2373, 2380, 2382,
2385
2317
2012, 2013, 2014,
2063, 2064, 2065,
2066, 2067, 2113,
2134, 2207, 2230,
2236, 2265, 2266,
2267, 2297, 2322,
2351, 2352, 2353,
2354, 2355, 2356,
2357, 2358, 2359,
2377
2312
2047, 2133, 2185
2312
2313
2174
2208
2206
2299, 2314
2152
2308
2194
2198
2302
2058, 2059, 2071,
2079, 2183, 2199,
2206, 2207, 2209
2310, 2312, 2314
2203
2305
2315
2215
2281, 2308
2313
2153
2200, 2301
2307
2198, 2238
2305
2312
2223
2031, 2032, 2033,
2034, 2035, 2082,
2127, 2137, 2138,
2154, 2182, 2197,
2283, 2319, 2325,
2346, 2347, 2349,
2372, 2381
2027, 2195, 2304,
2305, 2312
2139, 2195, 2212,
2374
2232
2312
2226
2305
2243, 2311
2318
2240, 2302, 2305,
2313
2009, 2010, 2084,
2122, 2142, 2143,
2144, 2181, 2190,
2228, 2262, 2375
2167
2309, 2318
2310
2304, 2305
2279, 2305

Skyworth
Slim Art
SM Electronic
Sonic Blue
Sontech
Sony

2310
2312
2305
2215
2316
2005, 2006, 2007,
2020, 2021, 2022,
2023, 2024, 2025,
2069, 2072, 2073,
2085, 2086, 2087,
2091, 2092, 2093,
2102, 2128, 2129,
2130, 2249, 2250,
2323, 2334, 2335,
2336, 2360, 2361,
2362, 2363, 2364,
2365, 2384
Soundmaster
2305
Soundmax
2305
Spectra
2313
Spectroniq
2155
Standard
2305
Star Cluster
2305
Starmedia
2308, 2318
Sungale
2158
Sunkai
2312
Superscan
2196
Supervision
2305
Sylvania
2094, 2180, 2189,
2196, 2219, 2224
Symphonic
2062, 2180
Synn
2305
T.D.E. Systems 2316
Tatung
2083, 2312
TCM
2228, 2379
Teac
2199, 2287, 2301,
2305
Tec
2310
Technics
2197
Technika
2312, 2317
Telefunken
2307
Tensai
2312
Tevion
2228, 2305, 2311
Theta Digital 2207
Thomson
2229, 2238, 2284,
2294
Tokai
2302, 2310
Top Suxess
2318
Toshiba
2004, 2026, 2027,
2028, 2029, 2030,
2098, 2099, 2100,
2101, 2114, 2117,
2118, 2119, 2136,
2187, 2195, 2205,
2291, 2337, 2338,
2378
TRANScontinents
2313, 2317
Transonic
2317
Trio
2312
Trutech
2160
TruVision
2309
TSM
2318
Umax
2315
United
2317
Urban Concepts 2205
US Logic
2167
Venturer
2199
Viewmaster
2318
Vocopro
2156
VocoStar
2157
Waitec
2318
Welltech
2300
Westinghouse 2109, 2168
Wharfedale
2304, 2305

Woxter
Xbox
Xlogic
XMS
Xoro
Yamada
Yamaha

Yamakawa
Yukai
Zenith

2315, 2318
2206, 2229
2305, 2312
2312
2300
2097, 2313, 2315
2000, 2001, 2002,
2003, 2011, 2018,
2019, 2036, 2106,
2197, 2273
2302, 2313
2232
2080, 2141, 2205,
2211, 2215

Blu-ray Disc
LG
Panasonic
Pioneer
Samsung
Sharp
Sony
Yamaha

2115
2089, 2131, 2132
2134
2035, 2127
2142, 2143, 2144
2025
2018

DVR
Bush
Panasonic
Philips
Pioneer
RCA
Samsung
Yamaha

2060
2037, 2038, 2039,
2040, 2041, 2042
2061, 2062
2063, 2064, 2065,
2066, 2067
2059
2035
2036

DVD Recorder
Aspire
Astar
Broksonic
Go Video
Hitachi
Insignia
Irradio
JVC
LG
Liteon
Panasonic

Philips
Pioneer
Pye
Samsung
Sansui
Sanyo
Sony

Sylvania
Toshiba

Yamaha

2140
2162
2192
2135
2108
2080
2103
2054, 2055, 2056,
2057
2107, 2115, 2141,
2188
2121
2037, 2038, 2039,
2041, 2042, 2043,
2089, 2104, 2108,
2112
2090, 2096, 2097,
2126, 2193
2067, 2113
2194
2034, 2082, 2138
2027
2139
2022, 2023, 2024,
2085, 2086, 2087,
2102, 2128, 2129,
2130
2189
2030, 2099, 2100,
2101, 2114, 2117,
2118, 2119
2106

Cable
ABC

ADB
Adelphia

3004, 3015, 3016,
3017, 3037, 3040,
3067, 3080, 3081
3070
3003

Alcatel
3066
Americast
3046
Amstrad
3048, 3068
Antronix
3019, 3020
Archer
3020
Arcon
3048
AT&T
3013
Axis
3048
Bell South
3046
Cable Vision
3014
Cabletenna
3019
Cabletime
3058
Cableview
3005
Clearmaster
3045
ClearMax
3045
Clyde Cablevision
3059
Colour Voice 3022
Comcast
3006, 3010, 3039
Comcrypt
3057
Comtronics
3023
Contec
3024
Coolmax
3045
COX
3006
Cryptovision
3060
Director
3006
Eastern
3025
Everquest
3041
Fidelity
3048
Filmnet
3057
Filmnet Cablecrypt
3061
Filmnet Comcrypt
3061
Finlux
3051
Focus
3044
Foxtel
3068
France Telecom 3054, 3055
Freebox
3069
GC Electronics 3020
GE
3015, 3016
GEC
3059
Gemini
3026, 3041
General Instrument
3006, 3008, 3016,
3039, 3050, 3067,
3075
Goldstar
3042
Gooding
3049
Grundig
3048, 3049
Hamlin
3027, 3028
Hirschmann
3051
Hitachi
3016
HomeChoice 3056
Humax
3001, 3002, 3071
ITT Nokia
3051
Jasco
3041
Jerrold
3006, 3008, 3016,
3026, 3037, 3041,
3050, 3064, 3067,
3075
JVC
3049
Kabel Deutschland
3043, 3073, 3074
Macab
3055
Magnavox
3029
Maspro
3049
Matsui
3049
MegaCable
3039
Memorex
3030, 3040
Minerva
3049
Mnet
3057
Motorola
3006, 3008, 3010,
3013, 3039, 3072,
3075

Movie Time
Mr Zapp
Multichoice
Multitech
NEC
NET Brazil
Nokia
Noos
NSC
Oak
Pace
Palladium
Panasonic
Paragon
Philips

3031, 3063
3055
3057
3045
3018
3007
3051
3055
3031
3024
3011, 3043, 3084
3049
3034, 3036, 3040
3040
3021, 3022, 3029,
3049, 3053, 3054,
3055
Pioneer
3012, 3032, 3038,
3042, 3048, 3083,
3084
Popular Mechanics
3044
Proscan
3015, 3016
Pulsar
3040
PVP Stereo Visual Matrix
3064
Quasar
3040
RadioShack
3041, 3045
RCA
3005, 3036, 3076,
3077
Realistic
3020
Recoton
3044
Regal
3028
Regency
3025
Rembrandt
3016
Runco
3040
Sagem
3055
Samsung
3011, 3023, 3032,
3042
SAT
3048
Scientific Atlanta 3003, 3004, 3011,
3012, 3013, 3062,
3078, 3079, 3080,
3081, 3082, 3083,
3084
Signal
3026, 3041
Signature
3016
Sony
3014, 3047
Sprucer
3036
Standard Component
3033
Starcom
3026, 3037, 3041,
3067
Stargate
3026, 3041
Starquest
3026, 3041
Supercable
3008
Supermax
3045
Tele+1
3057, 3061
Telepiu
3057
Thomson
3000, 3009
TIME WARNER 3006
Tocom
3017
Torx
3067
Toshiba
3040
Tristar
3045
Tudi
3052
Tusa
3026, 3041
TV86
3031
Unika
3019, 3020
United Cable 3037, 3064
Universal
3019, 3020
Universum
3049, 3051
V2
3045
Videoway
3065
View Star
3024, 3029, 3031

vii

Viewmaster
Vision
Visiopass
Vortex View
Wittenberg
Zenith
Zentek

3045
3045
3051, 3054, 3055
3045
3048
3035, 3040, 3046
3044

Sattelite
AB Sat
AccessHD
ADB
AGS
Akai
Alba

4138, 4139
4058
4142
4138
4101, 4103
4083, 4084, 4085,
4086, 4108, 4139
Aldes
4085, 4087, 4088
Allsat
4098, 4101, 4103
Allsonic
4074, 4087, 4090
Alltech
4139
Alpha
4103
Alpha Digital 4058
Alphastar
4031
Amitronica
4139
Amstrad
4089, 4113, 4136,
4139
Anglo
4139
Ankaro
4074, 4087, 4090,
4139
Anttron
4083, 4086
Apollo
4083
Armstrong
4089, 4103
Artec
4054
Asat
4101, 4103
ASLF
4139
Astacom
4138
Astra
4089, 4091, 4100,
4137, 4139
Astro
4074, 4086, 4088,
4090, 4093, 4135,
4136, 4137
AudioTon
4086, 4098
Aurora
4140
Austar
4140
Axiel
4138
Axis
4074, 4090, 4091,
4096
Best
4074, 4090
Blaupunkt
4093
Blue Sky
4139
Boca
4089, 4100, 4105,
4139
Boston
4138
Brain Wave
4095
Broadcast
4094
Broco
4139
BSkyB
4113, 4123
BT
4138
Bubu Sat
4139
Bush
4084, 4127
Cambridge
4136
Canal Satellite 4135
Canal+
4135
CaptiveWorks 4049
Channel Master 4060, 4085
Chaparral
4025
CHEROKEE 4138
Chess
4134, 4139
CityCom
4084, 4133, 4137
Clatronic
4095
CNT
4088
Comag
4000, 4001, 4002,
4003, 4004
Commlink
4087
Comtech
4096

viii

Condor
Connexions
Conrad

4074, 4090, 4137
4074, 4092
4074, 4133, 4136,
4137
Conrad Electronic 4137, 4139
Contec
4096
Coolsat
4050
Cosat
4098
Coship
4063
Crown
4089
Daeryung
4092
Daewoo
4107, 4139
DDC
4085
Delega
4085
Dew
4096
Diamond
4097
Digiality
4137
Digital Stream 4059
DIRECTV
4017, 4018, 4020,
4021, 4022, 4024,
4037, 4038, 4040,
4041, 4043, 4045,
4057, 4106, 4143,
4144, 4145, 4146,
4147, 4148, 4149,
4150, 4151, 4152,
4153, 4154, 4155,
4156, 4157
Discoverer
4134
Discovery
4138
Diseqc
4138
Dish Network 4011, 4012, 4013,
4014, 4019, 4039,
4064
Dishpro
4039, 4064
Distrisat
4103
Ditristrad
4098
DNT
4092, 4101, 4103
Drake
4026
DStv
4140
Dune
4074
Echostar
4011, 4019, 4039,
4064, 4092, 4139
Einhell
4083, 4087, 4089,
4136, 4139
Elap
4138, 4139
Elekta
4088
Elsat
4139
Elta
4074, 4083, 4090,
4098, 4101, 4103
Emanon
4083
Emme Esse
4074, 4090
Engel
4139
Ep Sat
4084
EURIEULT
4077
Eurodec
4102
Europa
4103, 4136, 4137
Europhon
4137
Eurosat
4089
Eurosky
4074, 4089, 4090,
4133, 4136, 4137
Eurostar
4089, 4133, 4137
Eutelsat
4139
Exator
4083, 4086
Expressvu
4039
Fenner
4074, 4134, 4139
Ferguson
4084, 4102, 4132
Fidelity
4136
Finlandia
4084
Finlux
4084
FinnSat
4096, 4102
Flair Mate
4139
Foxtel
4140
Freecom
4083, 4099, 4136
FTEmaximal 4074, 4139

Fuba

4074, 4083, 4090,
4092, 4093, 4101,
4133
Galaxis
4074, 4087, 4090,
4091, 4096, 4098,
4133, 4140
GE
4015, 4016, 4061,
4151
General Instrument
4027, 4065
GMI
4089
GOI
4039
Goldbox
4135
GoldStar
4099
Goodmans
4079, 4080, 4084
Goodmind
4061
Grandin
4077
Grothusen
4083, 4099
Grundig
4084, 4086, 4093,
4113, 4129, 4136,
4140
Hänsel & Gretel 4137
Hantor
4083, 4095
Hanuri
4088
Hauppauge
4126
Heliocom
4137
Helium
4137
Hinari
4085
Hirschmann
4074, 4093, 4128,
4136, 4137, 4138
Hisawa
4095
Hisense
4066
Hitachi
4032, 4084, 4149,
4153
Homecast
4005, 4006, 4007
Houston
4098
HTS
4039
Hughes
4018, 4022, 4144,
4146, 4150, 4152
Hughes Network Systems
4021
Humax
4051, 4075, 4076,
4110
Huth
4087, 4089, 4094,
4095, 4096, 4098,
4137, 4141
Hypson
4077
Ilo
4066
Imex
4077
Innovation
4090
Insignia
4057
Intertronic
4089
Intervision
4098, 4137
ITT Nokia
4084
Jerrold
4065
Johansson
4095
JOK
4138
JSR
4098
JVC
4011, 4019, 4039,
4079
Kamm
4139
Kathrein
4093, 4101, 4103,
4109, 4112, 4120,
4133, 4138, 4139
Kathrein Eurostar 4133
Klap
4138
Konig
4137
Kosmos
4099
KR
4086
Kreiselmeyer 4093
K-SAT
4139
Kyostar
4083
L&S Electronic 4074

Lasat

4074, 4088, 4090,
4100, 4133, 4134,
4137
Lasonic
4062
Lenco
4074, 4083, 4099,
4133, 4137, 4139
Leng
4095
Lennox
4098
Lenson
4136
Lexus
4103
LG
4053, 4057, 4099
Lifesat
4074, 4090, 4134,
4139
Lifetec
4090
Lorenzen
4137
Lorraine
4099
Lupus
4074, 4090
Luxor
4136
Lyonnaise
4102
Macab
4102
Magnavox
4045, 4055
Manata
4077, 4138, 4139
Manhattan
4084, 4088, 4098,
4138
Marantz
4101
Mascom
4088
Maspro
4084, 4139
Matsui
4138
Max
4137
Mediabox
4135
Mediamarkt
4089
Mediasat
4091, 4135, 4136
Medion
4074, 4090, 4139
Medison
4139
Mega
4101, 4103
Memorex
4045
Metronic
4077, 4078, 4083,
4086, 4087, 4088,
4139
Metz
4093
Micro electronic 4136, 4137, 4139
Micro Technology 4139
MicroGem
4056
Micromaxx
4074, 4090
Microstar
4090
Microtec
4139
Minerva
4093
Mitsubishi
4084, 4093, 4152
Mitsumi
4100
Morgan’s
4089, 4100, 4101,
4103, 4139
Motorola
4008, 4009, 4010,
4065
Multichoice
4140
Multitec
4134
Muratto
4099
Mysat
4139
Navex
4095
Neuhaus
4091, 4098, 4136,
4137, 4139
Neusat
4139
Next Level
4065
NextWave
4141
Nikko
4089, 4139
Nokia
4084, 4122
Nordmende
4083, 4084, 4085,
4088, 4102
Nova
4140
Novis
4095
Oceanic
4097
Octagon
4083, 4086, 4096
Okano
4089
Optex
4098
Optus
4135, 4140, 4141

Orbitech
OSat
Otto Versand
Pace
Pacific
Packsat
Palcom
Palladium
Palsat
Panasat
Panasonic

Panda
Pansat
Patriot
Paysat
PCT
Philco
Philips

Phoenix
Phonotrend
Pioneer
Polsat
Predki
Premiere
Priesner
Primestar
Profile
Promax
Prosat
Proscan
Protek
Proton
Provision
Quadral
Quelle
Quiero
RadioShack
Radiola
Radix
Rainbow
RCA

Realistic
Redpoint
Redstar
RFT
Roadstar
Roch
Rover
Saba
Sabre
Sagem
Sakura
Samsung

SAT
Sat Cruiser
Sat Partner
Sat Team

4083, 4134, 4135,
4136
4086
4093
4084, 4093, 4113,
4121, 4125, 4138
4097
4138
4085
4089, 4136
4134, 4136
4140
4043, 4044, 4046,
4084, 4113, 4118,
4143, 4148
4084, 4137
4047
4138
4045
4060
4055
4021, 4022, 4045,
4084, 4101, 4103,
4111, 4115, 4135,
4138, 4150, 4152,
4153, 4155, 4156
4096
4084, 4087, 4098
4124, 4135
4102
4095
4098, 4135
4089
4030
4138
4084
4085, 4087
4015, 4016, 4040,
4151
4097
4066
4088
4074, 4085, 4087,
4090, 4138
4093, 4133, 4137
4102
4065
4101, 4103
4092, 4119
4086
4015, 4016, 4034,
4035, 4036, 4037,
4038, 4040, 4151,
4157
4028
4091
4074, 4090
4087, 4101, 4103
4139
4077
4074, 4139
4088, 4133, 4137,
4138
4084
4069, 4102
4096
4018, 4021, 4023,
4041, 4042, 4081,
4082, 4083, 4114,
4150, 4154
4085, 4136
4141
4083, 4086, 4088,
4095, 4099, 4136
4139

Satcom
Satec
Satelco
Satford
Satmaster
Satplus
Schneider
Schwaiger
SCS
Seemann
SEG

4094, 4137
4139
4074
4094
4094
4134
4090, 4134, 4138
4097, 4134, 4137
4133
4089, 4091, 4092
4074, 4083, 4090,
4095
Seleco
4098
Servi Sat
4077, 4139
Siemens
4093
Silva
4099
Skantin
4139
Skardin
4091
Skinsat
4136
SKR
4139
Skymaster
4067, 4068, 4087,
4134, 4139
Skymax
4101, 4103
SkySat
4134, 4136, 4137,
4139
Skyvision
4098
SM Electronic 4134, 4139
Smart
4133, 4139
Sony
4017, 4020, 4135
SR
4089, 4100
Star Choice
4065
Starland
4139
Starring
4095
Start Trak
4083
Strong
4074, 4083, 4086,
4090, 4099, 4140
STS
4033
STVI
4077
Sumida
4089
Sunny Sound 4074
Sunsat
4139
Sunstar
4074, 4089, 4100
Supermax
4141
Tandberg
4102
Tandy
4086
Tantec
4084
TCM
4090
Techniland
4094
TechniSat
4071, 4072, 4073,
4092, 4103, 4116,
4117, 4134, 4135,
4136
Technology
4140
Technosat
4141
Technowelt
4137
Teco
4089, 4100
Telanor
4085
Telasat
4133, 4137
Telecom
4139
Telefunken
4067, 4083, 4138
Teleka
4086, 4089, 4092,
4136, 4137
Telemaster
4088
Telesat
4137
Telestar
4134, 4135, 4136
Televes
4084, 4136
Telewire
4098
Tempo
4141
Tevion
4090, 4139
Thomson
4070, 4084, 4102,
4104, 4130, 4133,
4135, 4137, 4138,
4139
Thorens
4097
Thorn
4084

Tivax
Tivo
Tokai
Tonna
Toshiba
Triad
Triasat
Triax
Turnsat
Tvonics
Twinner
UEC
Uher
UltimateTV
Uniden
Unisat
Unitor
Universum
US Digital
Variosat
Vega
Ventana
Viewsat
Visiosat
Voom
Vortec
Welltech
WeTeKom
Wevasat
Wewa
Winersat
Wisi
Woorisat
Worldsat
Xrypton
XSat
Zehnder
Zenith
Zodiac

4058
4150
4103
4084, 4094, 4098,
4136, 4139
4144, 4152, 4153
4099
4136
4093, 4133, 4136,
4139
4139
4132
4077, 4139
4140
4134
4020
4029, 4045
4089, 4096, 4103
4095
4093, 4133, 4137
4066
4093
4074
4101, 4103
4048
4095, 4098, 4138,
4139
4065
4083
4134
4134, 4136
4084
4084
4095
4084, 4092, 4093,
4136, 4137
4088
4138
4074
4139
4074, 4088, 4090,
4131, 4133
4052, 4057, 4145
4086

CD
Yamaha

5000, 5013

CD Recoder
Yamaha

5001

MD
Yamaha

5002, 5003, 5004

Tape
Yamaha

5005, 5006

Tuner
Yamaha

5007, 5008, 5009,
5010, 5014, 5015,
5016, 5017, 5018

USB
Yamaha

5012, 5021

DOCK
Yamaha

5011, 5022

LD
Yamaha

2002

ix

© 2009 Yamaha Corporation All rights reserved.

Printed in China

WQ95780



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.1
Modify Date                     : 2009:02:17 14:55:35-08:00
Create Date                     : 2009:01:12 18:37:51Z
Metadata Date                   : 2009:02:17 14:55:35-08:00
Format                          : application/pdf
Title                           : HTR-6240
Creator                         : Yamaha Corporation
Document ID                     : uuid:4f66be16-d64e-4033-9d89-b5d84fc3994d
Instance ID                     : uuid:14f3db98-fad1-443e-bb9f-c90139b98710
Page Count                      : 72
Page Layout                     : SinglePage
Author                          : Yamaha Corporation
EXIF Metadata provided by EXIF.tools

Navigation menu