Yamaha Nexo Geo S12 Series And Ls18 User Users Manual V105

2015-03-09

• PLEASE READ CAREFULLY BEFORE PROCEEDING
• CONTENTS
• 1 Introduction
• 2 GEO S12 General Set-up Instructions
  • 2.1 Speaker connection
    • 2.1.1 GEO S12 connectors
    • 2.1.2 LS18 connector
    • 2.1.3 Configuring Geo S12 for Passive or Active Mode
    • 2.1.4 Cabling
    • 2.1.5 Example:
• 3 Amplifier Selection for use with GEO S12 & LS18
  • 3.1 GEO S12, LS18 and NXAMP TDControllers
    • 3.1.1 NXAMP connectors
    • 3.1.2 GEO S12, LS18 and NXAMP recommended configurations
• 4 GEO S12 Setups on NEXO TD Controllers
  • 4.1 NXAMP TDControllers
• 5 Connection diagrams
  • 5.1 GEO S12 / NXAMP4x1 (Bridge Stereo – S12 in Passive mode)
  • 5.2 GEO S12 / NXAMP4x1 (Bridge Stereo – S12 in Active mode)
  • 5.3 LS18 / NXAMP4x1 (Bridge Stereo)
  • 5.4 LS18 & Geo S12 / NXAMP4x1 (Bridge Stereo – S12 in Passive mode)
  • 5.5 GEO S12 / NXAMP4x4 (4 Channels – S12 in Passive mode)
  • 5.6 GEO S12 / NXAMP4x4 (S12 in Stereo Active mode)
  • 5.7 LS18 / NXAMP4x4 (4 channels)
  • 5.8 LS18 & GEO S12 NXAMP4x4 (S12 in Passive Mode)
• 6 NS-1 Simulation software
• 7 Configurable Directivity Device
  • 7.1 Installing & removing GEO’s Configurable Directivity flanges
  • 7.2 When & where to use Configurable Directivity flanges
• 8 GEO S12 hardware setup procedure
  • 8.1 SAFETY FIRST
    • 8.1.1 Flown Systems Safety
    • 8.1.2 Ground Stacking Safety
    • 8.1.3 Contacts
  • 8.2 General Description
    • 8.2.1 Described configurations
    • 8.2.2 WARNINGS ON GEO S12 ACCESSORIES
  • 8.3 GEO S12 in fixed installations
    • 8.3.1 Fixed installation Accessories and kits
    • 8.3.2 Single GEO S12 rigidly mounted on a wall or a ceiling (vertical or horizontal)
      • Required items
      • Procedure
    • 8.3.3 Single GEO S12 cable mounted on a wall or a ceiling (vertical or horizontal)
      • Required items
      • Procedure
    • 8.3.4 GEO S12 vertical array rigidly mounted on a ceiling
      • Required items
      • Procedure
    • 8.3.5 LS18 & GEO S12 vertical array rigidly mounted on a ceiling
      • Required items
      • Procedure
    • 8.3.6 LS18 and GEO S12 vertical array cable mounted on a ceiling
      • Procedure
    • 8.3.7 GEO S12 horizontal array rigidly mounted on a ceiling
      • Procedure
    • 8.3.8 GEO S12 horizontal array cable mounted on a ceiling
      • Required items
      • Procedure
  • 8.4 GEO S12 in touring applications
    • 8.4.1 Touring Accessories
    • 8.4.2 Single GEO S12 on speaker stand or on LS18 horizontally
      • Required items
      • Procedure
    • 8.4.3 Single GEO S12 flown vertically
      • Required items
      • Procedure
    • 8.4.4 Single GEO S12 flown horizontally
      • Required items
      • Procedure
    • 8.4.5 Two GEO S12 on wind-up stand
      • Required items
      • Procedure
    • 8.4.6 Two GEO S12 flown horizontally
      • Required items
      • Procedure
    • 8.4.7 Two or more GEO S12 flown vertically
      • Required items
      • Procedure
    • 8.4.8 LS18 and three or more GEO S12 flown horizontally
      • Required items
      • Optional GPT-TLB link bar for GPT- XBOW
      • Procedure
    • 8.4.9 Ground stacked LS18 and GEO S1210
      • Required items
      • Optional GPT-TLB link bar for GPT-XBOW
      • LS18 and GEO S12 ground stack device description
      • Procedure
  • 8.5 Testing and Maintenance of the system
• 9 System alignment guidelines
  • 9.1 GEO S12 Vertical Cluster design
  • 9.2 Stacked LS18s and Flown GEO S12
    • Recommended NX242 GEOS12 setup family: X-OVER
  • 9.3 Driving the LS18s from the AUX send
    • Why is it unlikely that AUX and MAIN outputs have the same phase?
    • Consequences of badly aligned systems
    • Precautions & Checks
  • 9.4 Recommended installation tools and equipment
• 10 GEO S12 – LS18s System Check List
  • 10.1 Are the speakers properly connected and angled ?
  • 10.2 Final Pre-Sound Check Check
• 11 Technical Specifications
  • 11.1 LS18 Subwoofer
    • 11.1.1 System specifications
    • 11.1.2 Dimensions
  • 11.2 GEO S1230 Module
    • 11.2.1 System specifications
    • 11.2.2 Dimensions
    • 11.2.3 Diagrams
  • 11.3 GEO S1210 Module
    • 11.3.1 System specifications
    • 11.3.2 Dimensions
    • 11.3.3 Diagrams
  • 11.4 GEO S12 Touring Applications Accessories
    • 11.4.1 GPT- BUMPER
      • Parts
      • Dimensions
      • Weight
    • 11.4.2 LS18 Rigging Plates
      • Parts
      • Dimensions
    • 11.4.3 GEO S12 Rigging Plates
      • Parts
      • Dimensions
      • Weight (pair)
    • 11.4.4 Tension Mode Link Bars for GPT-XBOW
      • Parts
      • Dimensions
      • Weight (pair)
    • 11.4.5 Lifting Ring
      • Parts
    • 11.4.6 Truss hook for GPT-PSBRK or GPT-SSBRK
      • Parts
    • 11.4.7 Truss hook for single vertical GEO S12
      • Parts
    • 11.4.8 “U” Bracket for single vertical GEO S12
      • Parts
    • 11.4.9 U” Bracket for two vertical GEO S12
      • Parts
    • 11.4.10 Ground Stacking Device for up to 6 GEO S1210
      • Parts
  • 11.5 GEO S12 Fixed Installations Accessories
    • 11.5.1 LS18 & GEO S12 Bumper (VNI-BUMPER)
      • Parts
    • 11.5.2 LS18 Counter Plate (LSI-CPLA)
      • Parts
    • 11.5.3 GEO S12 Counter Plate (VNI-CPLA)
      • Parts
    • 11.5.4 LS18 & GEO S12 Connecting Plate 1 (VNI-ANPL1)
      • Parts
    • 11.5.5 GEO S12 Connecting Plate 2 (VNI-ANPL2)
      • Parts
    • 11.5.6 GEO S12 Connecting Plate 3 (VNI-ANPL3)
      • Parts
    • 11.5.7 Single GEO S12 “U” Bracket
      • Parts
    • 11.5.8 “L” Bracket for cable suspension
      • Parts
    • 11.5.9 “U” Bracket for rigid suspension
      • Parts
    • 11.5.10 GEO S12 Push-Pins (04VXT-BL820)
• 12 GEO S12 Series Parts & Accessories List
  • 12.1 Modules & Control Electronics List
  • 12.2 Accessories List
• 13 USER NOTES