Yamaha PSR4000E1 PSR 4000 Owner's Manual PSR4000E

Yamaha Corporation PSR-4000 Owner's Manual psr4000e Yamaha Corporation - PSR-4000 - Owner's Manual

User Manual: Yamaha PSR-4000 Owner's Manual

Open the PDF directly: View PDF .
Page Count: 165

Download
Open PDF In Browser	View PDF

SPECIAL MESSAGE SECTION
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on
this page and those indicated in the safety instruction section.

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within the equilateral triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the product.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electrical shock.

IMPORTANT NOTICE: All Yamaha electronic products
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is properly installed and used in its normal and customary manner,
all foreseeable risks have been eliminated. DO NOT modify
this unit or commission others to do so unless specifically
authorized by Yamaha. Product performance and/or safety
standards may be diminished. Claims filed under the expressed warranty may be denied if the unit is/has been modified. Implied warranties may also be affected.
SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at
the time of printing. However, Yamaha reserves the right to
change or modify any of the specifications without notice or
obligation to update existing units.

ENVIRONMENTAL ISSUES: Yamaha strives to produce
products that are both user safe and environmentally
friendly. We sincerely believe that our products and the
production methods used to produce them, meet these goals.
In keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
Battery Notice: This product MAY contain a small nonrechargable battery which (if applicable) is soldered in
place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform
the replacement.
Warning: Do not attempt to recharge, disassemble, or incinerate this type of battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by
applicable laws. Note: In some areas, the servicer is required
by law to return the defective parts. However, you do have
the option of having the servicer dispose of these parts for
you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that
contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of knowledge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your
dealer before requesting service.
NAME PLATE LOCATION: The graphic below indicates
the location of the name plate. The model number, serial
number, power requirements, etc., are located on this plate.
You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this
manual as a permanent record of your purchase.
AUX OUT

L/L+R

MIDI
OUT

THRU

FOOT SWITCH

FOOT VOLUME

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

AC INLET

Model _____________________________________
Serial No. __________________________________
Purchase Date ______________________________

92-469 1

Owner’s Manual

English

Bedienungsanleitung

Deutsch

Mode d’emploi

Français

Manual de instrucciones

Español

Congratulations!
You are the proud owner of an extraordinary electronic keyboard. The Yamaha
PSR-4000 PortaTone combines the most advanced AWM tone generation technology with state-of-the-art digital electronics and features to give you stunning sound
quality with maximum musical enjoyment. The advanced Auto Accompaniment and
One Touch Setting features, in particular, are brilliant examples of how Yamaha
technology can significantly expand your musical horizons. A new large-size
graphic display and easy-to-use interface also greatly enhance the operability of
this advanced instrument.
In order to make the most of your PortaTone’s features and vast performance
potential, we urge you to read the manuals thoroughly while trying out the various
features described. Keep the manuals in a safe place for later reference.

Contents
Taking Care of Your PortaTone

Floppy Disks & the Disk Drive ........... 3

Using the Accompaniment
Section
■

Panel Controls

Connections & Music Stand

■
■

The Demonstration

The Random & Single Demo Play
Modes ...................................................... 9

The PSR-4000 Display &
Display-based Controls

One Touch Setting

■

The [MIXER] Button ........................ 10
The [LIST HOLD] Button ................. 11
The [LCD CONTRAST] Control ...... 11

■

■
■

■

■
■
■

Playing the PSR-4000

■

Before You Begin ............................. 12

■

Selecting & Playing Voices ............. 12
Keyboard Percussion ....................... 15
Changing the “L” Split Point .......... 16

■

THE TEMPO SET FUNCTION ........ 32

Expression & Effects

The Display & Multi-function
Controls ................................................ 10
■

Fade-ins and Fade-outs .................. 26
Accompaniment Volume ................. 26
The Auto Mute Function .................. 26

Changing the “A” Split Point .......... 27
The Chord Assist Function ............. 28
The Arranger Buttons ....................... 30

■

Registration Memory
19

Harmony .......................................... 33
Sustain ............................................ 33
Touch Response ............................. 33
Reverb ............................................. 34
Chorus ............................................. 34
DSP Effects ..................................... 34
Left Hold .......................................... 35
Pitch Bend Wheel ............................ 35
Modulation Wheel ........................... 35

The Multi Pads

The PHRASE/CHORD Mode ............ 36

Transposition, Tuning, &
Octave Change

TRANSPOSE & TUNE ........................ 17
OCTAVE CHANGE .............................. 18

The PHRASE Pads (pads 1 … 4) ...... 36
■ Recording Phrases .......................... 37
■ Phrase Playback ............................. 38
The CHORD Pads (pads 5 … 8) ....... 38
■ Recording Chords ........................... 38
■ Chord Playback ............................... 39
■ The Repeat & Chord Match Settings40
● REPEAT ...................................... 40
● CHORD MATCH ......................... 40

The PERCUSSION Mode .................. 41
■

■

Assigning Different Instruments
To the PERCUSSION Pads ............ 41
Playing the Percussion Pads .......... 42

Registering the Panel Settings ....... 43
Entering a Registration Name .......... 44

Recalling the Registered Panel
Settings ................................................. 45
The Freeze Function .......................... 46
The Freeze Group Settings .............. 46

Song Playback & Recording

Song Playback .................................... 47
Pause, Fast Forward & Reverse ..... 48
Chain Playback ................................. 49
Volume & Mute/Solo Settings .......... 50
■

Song Recording .................................. 52
Quick Record ..................................... 54
■ THE TRACK INDICATORS ............. 56
■ TRACK DELETE ............................. 56
■ PLAYBACK ..................................... 56
■ EXITING .......................................... 56
Chord Step Recording ...................... 57
■ DELETING EVENTS ....................... 58
Quick Record Mode Edit Functions ... 59
■ SONG DELETE ............................... 59
Multitrack Record .............................. 60
■ THE TRACK INDICATORS ............. 62
■ TRACK DELETE ............................. 62
■ RECORDING & EFFECTS ............. 62
■ PLAYBACK ..................................... 63
■ EXITING .......................................... 63
Punch-In Recording .......................... 63
Track Volume Control ....................... 66
Multitrack record Mode
Edit Functions ................................... 66
■ QUANTIZE ...................................... 66
■ TRACK COPY/MIX ......................... 67
■ INITIAL EDIT ................................... 68
■ SONG DELETE ............................... 68

Custom Accompaniment

Effects ................................................ 73
■ REVERB DEPTH ............................ 73
■ CHORUS TYPE & DEPTH .............. 74
■ PAN ................................................. 74
Edit ..................................................... 75
■ QUANTIZE ...................................... 75
■ COPY .............................................. 75
■ REMOVE EVENT ............................ 76
Store/Clear ......................................... 77
■ STORE ............................................ 77
■ CLEAR CUSTOM STYLE ............... 77

Disk Operations

Engaging the Easy/Full Edit Mode 78
■

EXITING .......................................... 78

The Easy Edit Parameters ............... 79
EDIT .................................................... 79
NAME .............................................. 79
■ PAN ................................................. 79
■ VIBRATO ........................................ 79
■ TONE .............................................. 80
■ ENVELOPE ..................................... 80
STORE/CLEAR .................................. 81
■ STORE ............................................ 81
■ CLEAR CUSTOM VOICE ............... 81
E1:BASIC ........................................... 82
■ NAME .............................................. 82
■ WAVE (except for the DRUM KITS) ........... 82
■ TUNE (except for the DRUM KITS) ............ 83
■ VOLUME (except for the DRUM KITS) ...... 83
■ KEY ON DELAY
(except for the DRUM KITS) ...................... 83
■ PAN ................................................. 83
E2:CONTROLLER ............................. 83
■ PITCH BEND WHEEL ..................... 83
■ MODULATION WHEEL .................. 84
■ INITIAL TOUCH CURVE ................. 84
E3:ENVELOPE ................................... 85
■ AMPLITUDE ENVELOPE ............... 85
■ FILTER ............................................ 86
E4:EFFECTS ...................................... 87
■ LFO ................................................. 87
■ DELAY VIB ...................................... 87
■ REVERB DEPTH ............................ 87
■ CHORUS DEPTH ........................... 87
■ DSP EFFECT .................................. 87
STORE/CLEAR .................................. 88
■ STORE ............................................ 88
■ CLEAR CUSTOM VOICE ............... 88

■
■

■

SCALE (ARABIC) .......................... 100
VOICE PART ................................ 100
● PART TUNE .............................. 100
● OCTAVE ................................... 101
● PAN ........................................... 101

F2: Split Point/ABC Mode/
Multi Pad
■

■

115

MEMORY BACKUP ...................... 115
MEMORY BACKUP .................. 115
● DISPLAY - MIDI BANK SEL. &
PROG. CHANGE #, TIME ......... 115
RECALL PRESET DATA .............. 115
●

■

The [EXIT] Button ............................ 99

F1: Scale (Arabic)/Voice Part 100
■

114

HARMONY .................................... 114
REGISTRATION ........................... 114
● NAME ........................................ 114
● FREEZE GROUP SETTING ..... 114

F7: Utility

General Function Selection &
Editing Procedure .............................. 98

■

The Full Edit Parameters .................. 82

F6: Harmony/Registration

■

The PSR-4000 “Functions”
■

Custom Voice Edit

Load From Disk .................................. 90
Save To Disk ........................................ 92
Rename File/Song .............................. 93
Delete File/Song .................................. 95
Format FD ............................................. 96
Song Copy ............................................ 96

102

SPLIT POINT/ABC MODE ............ 102
● SPLIT POINT ............................ 102
● ABC MODE ............................... 102
MULTI PAD ................................... 103
● REPEAT .................................... 103
● CHORD MATCH ....................... 103

F8: MIDI

116

SYSTEM .............................................. 116
■
■

■

LOCAL CONTROL ........................ 116
CLOCK & TRANSPOSE ............... 117
● CLOCK ...................................... 117
● TRANSPOSE ............................ 117
MESSAGE SWITCH ..................... 117
● START/STOP ............................ 117
● EXCLUSIVE .............................. 118

TRANSMIT..................................... 118
●
●
●
●

TRANSMIT MONITOR .............. 118
CHANNEL ................................. 118
PART ......................................... 118
NOTE, CONTROL CHANGE, PROGRAM CHANGE, & PITCH BEND
SWITCH .................................... 119

RECEIVE ....................................... 120

F3: Controller
■

104

FOOT CONTROLLER ................... 104
VOLUME ................................... 104
● SW1 (FOOTSWITCH 1) &
SW2 (FOOTSWITCH 2) ............ 104
PANEL CONTROLLER ................. 106
● SUSTAIN BUTTON ................... 106
● PITCH BEND WHEEL ............... 106
● MODULATION WHEEL ............. 106
● INITIAL TOUCH ........................ 107
●

■

F4: Style Revoice
●
●
●
●

VOLUME OFFSET .................... 108
VOICE ....................................... 108
REVERB DEPTH ...................... 109
CHORUS DEPTH ...................... 109

F5: Reverb/Chorus/DSP Effect
■

■
■

●
●
●

RECEIVE MONITOR ................. 120
CHANNEL ................................. 120
MODE ....................................... 120
NOTE, CONTROL CHANGE, PROGRAM CHANGE, & PITCH BEND
SWITCH .................................... 120

PANEL CONTROL ........................ 121
●
●
●

OCTAVE ................................... 121
NOTE ........................................ 121
TYPE SELECT & SUB ............. 121

Troubleshooting ............................... 123
Index .................................................... 124

110

REVERB TYPE & DEPTH ............ 110
REVERB TYPE ......................... 110
● REVERB PARAMETER EDIT ... 111
● REVERB DEPTH ...................... 111
CHORUS DEPTH ......................... 112
DSP EFFECT TYPE & DEPTH ..... 112
● DSP EFFECT TYPE ................. 112
● DSP EFFECT PARAMETER EDIT . 113
● DSP EFFECT DEPTH ............... 113
●

The Drum Kit Edit Mode ................... 89

108

●

Voice List ............................................ 126
Percussion Kit List .......................... 129
Style List ............................................. 130
Setup Parameters ............................. 131
Fingering Chart ................................. 134
The DSP Effects & Parameters ..... 143
MIDI Implementation Chart ............ 149
MIDI Data Format .............................. 152
Specifications .................................... 157

Taking Care of Your PortaTone
Your PortaTone will give you years of playing pleasure if you follow
the simple rules given below:

■ Location
Do not expose the instrument to the following conditions
to avoid deformation, discoloration, or more serious damage.
● Direct sunlight (e.g. near a window).
● High temperatures (e.g. near a heat source, outside, or
in a car during the daytime).
● Excessive humidity.
● Excessive dust.
● Strong vibration.

■ Power Supply

0V
24

130V

● In some areas the PSR-4000 will
have a voltage selector on the bot110V
tom panel. Make sure that the voltage selector is set for the AC mains
voltage in your area. The voltage
selector can be set (rotated) by using a screwdriver. If in doubt, contact your Yamaha dealer.
● Turn the power switch OFF when the instrument is not
in use. (The PSR-4000 uses a very small amount of
power to maintain the internal memory contents even
when no batteries are installed and the power is turned
off.)
● The power supply cord should be unplugged from the
AC outlet if the instrument is not to be used for an
extended period of time.
● Unplug the instrument during electric storms.
● Avoid plugging the instrument into the same AC outlet
as appliances with high power consumption, such as
electric heaters or ovens. Also avoid using multi-plug
adapters since these can result in reduced sound
quality, operation errors, and possibly damage.

■ Memory Backup Batteries
The PSR-4000 requires four 1.5 V C size (LR14) batteries
for memory backup power. If no backup batteries are
installed, the memory contents will be lost when then
instrument is unplugged from the AC mains supply. Please
use alkaline batteries. The average life of a set of alkaline
batteries is about 12 months.
1. Open Battery Compartment Cover
Open the battery compartment cover — located on the
instrument’s bottom panel — by pressing on the two
latches on the cover and pulling outward, as shown in
the illustration.
2. Insert Batteries
Insert the four batteries, being careful to follow the
polarity markings on the bottom panel.
3. Replace Cover
Replace the compartment cover, making sure that it
locks firmly in place.

NOTES

• Never mix old and new, or different type of batteries!
• To prevent damage due to battery leakage, it is a good idea
to remove the batteries from the PSR-4000 (after saving any
important data to disk) if it is not to be used an extended
period of time. (YAMAHA is not responsible irretrievable
internal data.)

■ Turn Power OFF When Making Connections
● To avoid damage to the instrument and other devices
to which it is connected (a sound system, for example),
turn the power switches of all related devices OFF prior
to connecting or disconnecting audio and MIDI cables.

■ Handling and Transport
● Never apply excessive force to the controls, connectors or other parts of the instrument.
● Always unplug cables by gripping the plug firmly, not by
pulling on the cable.
● Disconnect all cables before moving the instrument.
● Physical shocks caused by dropping, bumping, or
placing heavy objects on the instrument can result in
scratches and more serious damage.

■ Cleaning
● Clean the cabinet and panel with a dry soft cloth.
● A slightly damp cloth may be used to remove stubborn
grime and dirt.
● Never use cleaners such as alcohol or thinner.
● Avoid placing vinyl objects on top of the instrument
(vinyl can stick to and discolor the surface).

■ Electrical Interference
● This instrument contains digital circuitry and may cause
interference if placed too close to radio or television
receivers. If this occurs, move the instrument further
away from the affected equipment.

■ Data Backup
● Save all important data to disk before turning off for
longer periods.
● Internal data (e.g. Registration data) is retained in
memory even if the power switch is turned OFF when
backup batteries are installed as described above. If
you do not intend to use the PSR-4000 for an extended
period of time, it is a good idea to unplug the instrument
from the AC outlet and remove the batteries.

Taking Care of Your PortaTone

● Internal memory data can be corrupted due to incorrect operation. Be sure to “save” important data to a
floppy disk frequently so you have a backup to revert to
if something happens to damage the data in memory.
Also note that magnetic fields can damage data on the
disk, so it is advisable to make a second back-up copy
of disks that contain very important data, and keep
backup disks in a safe place away from stray magnetic
fields (i.e. away from speakers, appliances containing
motors, etc.).

■ Service and Modification
● The PSR-4000 contains no user serviceable parts.
Opening it or tampering with it in anyway can lead to
irreparable damage and possibly electric shock. Refer
all servicing to qualified YAMAHA personnel.

Floppy Disks & the Disk Drive
■ Type of Disk
Use only 3.5-inch 2DD or 2HD floppy disks.

■ Disk Insertion & Removal
● To insert a floppy disk in the disk drive, hold the disk
with the label side facing up and the sliding shutter
facing the disk drive door, then insert carefully until the
disk clicks into place.

● To remove a floppy disk from the disk drive, make sure
the “DISK IN USE” light is not lit and press the disk
eject button firmly as far as it will go and then, when the
disk is full ejected, remove it by hand.
If the eject button is only partially pressed or pressed
too quickly the eject mechanism may not function
properly, leaving the disk stuck halfway. Do not attempt
to remove the disk forcefully if this happens, since
excess force can damage the disk and/or the drive
mechanism. Try either pressing the eject button carefully again, or push the disk all the way back into the
drive and repeat the eject procedure.

ing Disk to clean the head about once a month. Ask your
Yamaha dealer about the available of head-cleaning
disks.

■ Floppy Disk Handling & Storage
The actual recording medium inside a floppy disk has a
fine coating of magnetic particles in which the data is
“stored”. To protect this coating as well as the disk drive’s
delicate read-write head, please observe the following:
● Always keep floppy disks in their case when they are
not in use. Never place heavy objects on a disk or bend
the disk in any way. Also keep disks away from liquids
and dust.
● Never open the disk’s shutter and touch the exposed
surface of the disk.
● Keep floppy disks away from strong magnetic fields
such as those produced by television sets, speakers,
motors, etc.
● Never leave floppy disks in areas exposed to strong
direct sunlight, excessively high or low temperature, or
high humidity.
● Never use a floppy disk with a deformed shutter or
housing.
● Do not attach anything other than the provided labels
to a floppy disk. Also make sure that labels are attached in the proper location.

■ Protecting Your data

● Never attempt to remove a floppy disk during a record
or playback operation!! This can corrupt the data on the
disk, and actually damage the disk drive!
● Be sure to remove the floppy disk from the disk drive
before turning off the power. A floppy disk left in the
drive for extended periods can easily pick up dust and
dirt that can cause data read/write errors.

● To prevent accidental erasure of important data you
have saved to floppy disk, be sure to slide the disk’s
write-protect tab to the “write protect” position (the tab
window should be open). When this is done the disk
cannot be written to.
● Make regular backup copies of important data to a
separate floppy disk, and keep your backup disks in a
separate, safe place.
● To ensure the safety of your data (and of the disk drive
itself) always use floppy disks from a well-known,
reliable manufacturer. “No-brand” disks can cause
trouble.

■ Clean the Read/Write Head Regularly
This instrument employs a precision magnetic read/write
head which, after an extended period of use, will pick up
a layer of magnetic particles from the disks used that will
eventually cause read and write errors. To maintain the
disk drive in optimum working order we recommend that
you use a commercially-available Dry-type Head Clean-

Write protected

Write enabled

YAMAHA is not responsible for damage caused by improper handling or operation.
YAMAHA provides no guarantee against disk damage.

Panel Controls

ACCOMPANIMENT

LEFT ORCHESTRA

ROCK /
ROCK’N’ROLL

ARRANGER

SONG
PLAY

LATIN

BALLAD

COUNTRY&
WESTERN

DANCE

MARCH /
WALTZ

SYNTH /
PAD

DISCO

BALLROOM

GUITAR/
PERCUSSIVE

RHYTHM &
BLUES

CUSTOM
STYLE

CUSTOM
VOICE

PAD

BRASS/
WOODWIND

ONE TOUCH
SETTING

TEMPO

AUTO BASS CHORD

INTRO/
FILL to

FADE
IN / OUT

ENDING/
rit.

MAIN

LEFT HOLD

REC/STOP

PHRASE/CHORD

MIXER

LIST
HOLD

PHRASE/CHORD
PLAYING

PHRASE

PERCUSSION

LEFT

START/STOP

ACCOMPANIMENT DIRECTOR

PITCH BEND

SYNCHRO
START

–

RHYTHM
• MAX

DISK

$ % ^
&

BASS

MIN •

(

FUNCTION

SONG
CUSTOM
RECORD ACCOMP. REC

STRINGS /
CHOIR

POP / BEAT

CHORD

CUSTOM
VOICE EDIT

PIANO /
ORGAN

JAZZ

PHRASE

MASTER VOLUME

)

! @ #

CHORD

MULTI PAD

I
MODULATION

MAX

DOWN

MIN

PHONES

1 POWER Button .......................................... page 8

9 LEFT ORCHESTRA Buttons ............ pages 13, 14

2 DEMO Button ............................................. page 8

0 LEFT HOLD Button .................................. page 35

3 MASTER VOLUME Control ........................ page 8

! SONG PLAY Button ................................. page 47

4 ARRANGER Buttons ............................... page 30

@ CUSTOM VOICE EDIT Button ................. page 78

PHRASE, PAD, CHORD, BASS, RHYTHM

# FUNCTION Button ................................... page 98

5 ACCOMPANIMENT Buttons .................... page 22

$ SONG RECORD Button .......................... page 52

6 ONE TOUCH SETTING Button ................ page 31

% CUSTOM ACCOMP. REC Button ............. page 69

7 AUTO BASS CHORD Button ................... page 19

^ DISK Button ............................................. page 90

8 ACCOMPANIMENT DIRECTOR Buttons

& TEMPO [–] and [+] Buttons ...................... page 22

........................................................ pages 23 – 26
FADE IN/OUT, INTRO/FILL to A/B, MAIN A/B,
ENDING/rit., SYNCHRO START, START/STOP

* MULTI PAD Buttons ................................. page 36
REC/STOP, PHRASE/CHORD-PERCUSSION,
1—8

Panel Controls

t y u
TOUCH
RESPONSE

SUSTAIN

HARMONY

REVERB

DSP
EFFECT

CHORUS

LCD
CONTRAST

FREEZE

ACCORDION/
WORLD

TRUMPET/
BRASS

ORGAN

SYNTH/
PAD

SAX/
WOODWIND

STRINGS/
CHOIR

SOUND
EFFECT

STRINGS/
CHOIR

SAX/
WOODWIND

PERCUSSIVE

GUITAR/
BASS

TRUMPET/
BRASS

DRUM KIT

SYNTH/
PERCUSSIVE

DEMO

POWER

GUITAR/
BASS

CUSTOM
VOICE

RIGHT 1

RIGHT 2

LEAD

Q
r

LEAD

PIANO

PART SELECT

i o p

EXIT

RIGHT ORCHESTRA

MEMORY

PSR-4000

BANK 1~16

–

DISK IN USE

REGISTRATION

( Liquid Crystal Display (LCD) .................... page 10

Q LCD CONTRAST Control ........................ page 11

) LCD Buttons ............................................. page 10

W REGISTRATION Buttons ......................... page 43

q MIXER Button .......................................... page 10
w LIST HOLD Button ................................... page 11
e LCD ▲/▼ Controls ................................... page 10
r EXIT Button .........................................pages 9, 99
t HARMONY Button ................................... page 33
y SUSTAIN Button ...................................... page 33
u TOUCH RESPONSE Button .................... page 33
i REVERB Button ....................................... page 34
o CHORUS Button ...................................... page 34

FREEZE, MEMORY, BANK 1~16 [–] and [+],
1—8

E PART SELECT Buttons ............................ page 14
R1, R2

R RIGHT ORCHESTRA Buttons .......... pages 13, 14
T LEAD Buttons ................................... pages 13, 14
Y Disk Drive .................................... pages 47, 52, 90
U PITCH BEND Wheel ................................ page 35
I MODULATION Wheel .............................. page 35

p DSP EFFECT Button ............................... page 34

Connections & Music Stand

PHONES

■ Check the Voltage (Before you connect the AC cord) .........................................................................
In some areas the PSR-4000 will have a voltage
selector on the bottom panel. Make sure that the
voltage selector is set for the AC mains voltage in
your area. The voltage selector can be set (rotated)
by using a screwdriver. If in doubt, contact your
Yamaha dealer.

110V

0V
24

130V

1 The PHONES Jack ......................................................................................................................................................................
A standard pair of stereo headphones can be
plugged in here for private practice or late-night
playing. The internal stereo speaker system is automatically shut off when a pair of headphones is
plugged into the PHONES jack.

2 The AUX OUT L/L+R and R Jacks .............................................................................................................................
The rear-panel AUX OUT L/L+R and R jacks
deliver the output of the PSR-4000 for connection to
a keyboard amplifier, stereo sound system, a mixing
console, or tape recorder. If you will be connecting
the PSR-4000 to a monaural sound system, use only
the L/L+R jack. When a plug is inserted into the L/
L+R jack only, the left- and right-channel signals
are combined and delivered via the L/L+R jack so
you don’t lose any of the PSR-4000 sound.

Stereo System

AUX OUT

L/L+R

3 FOOT SWITCH 1 and 2 Jacks .........................................................................................................................................
One or two optional Yamaha FC5 footswitches
connected to these jacks can be used to control
sustain and a range of other important functions.
Refer to the “FOOT SWITCH 1” and “FOOT SWITCH
2” functions described on page 104.

FOOT SWITCH

Connections & Music Stand

AUX OUT

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

WARNING:

AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.

L/L+R

MIDI
OUT

THRU

FOOT SWITCH

FOOT VOLUME

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

AC INLET

3 4

4 FOOT VOLUME Jack ................................................................................................................................................................
An optional Yamaha FC7 Foot Controller can be
connected to this jack to allow foot volume (expression) control. The foot controller can be assigned to
control overall volume or the volume of individual
accompaniment and/or voices via the “FOOT VOLUME” function — page 104.

FOOT VOLUME

5 MIDI IN, THRU and OUT Connectors ......................................................................................................................
The MIDI IN connector receives MIDI data
from an external MIDI device (such as a MIDI
sequencer) which can be used to control the PSR4000. The MIDI THRU connector re-transmits any
data received at the MIDI IN connector, allowing
“chaining” of several MIDI instruments or other
devices. The MIDI OUT connector transmits MIDI
data generated by the PSR-4000 (e.g. note and
velocity data produced by playing the keyboard).
More details on MIDI are provided on page 116.

MIDI
IN

OUT

Music
Computer

THRU

Tone Generator

The Music Stand
The PSR-4000 is supplied with a music stand
that can be attached to the instrument by inserting it
into the holes at the rear of the speaker panel.

The Demonstration
To give you an idea of the PSR-4000’s sophisticated capabilities, it
is programmed with 14 demonstration sequences which can be played
in a number of ways.

Z Switch ON ............................................................................................................................................................................................
Plug the AC power cord into a convenient AC
outlet, then press the [POWER] button to turn the
PSR-4000 ON.

DEMO

POWER

X Set an Initial Volume Level ................................................................................................................................................
Set the [MASTER VOLUME] control to a
position about a quarter of the way toward the
highest setting. You can re-adjust the [MASTER
VOLUME] control for the most comfortable overall volume level after playback begins.

MASTER VOLUME

MIN •

• MAX

C Press the [DEMO] Button ...................................................................................................................................................
Press the [DEMO] button and the PSR-4000
demo display will appear.

DEMO

POWER

V Start & Stop Playback as Required
Press the START LCD button to start playback of
all demo songs. Press the STOP LCD button when
you want to stop playback.

B Exit When Done ..........................................................................................................
Press either the [DEMO] button or the [EXIT]
button to exit from the demo mode and return to the
normal play-mode display when you’ve finished
playing the demo songs.

DEMO
EXIT

The Demonstration

The Random & Single Demo Play Modes
If you play the demo as described above, you’ll hear all 14 demo songs played in random order. By selecting
an appropriate play mode you can also play back all the songs sequence, or play a single specified song.

Z Select a Play Mode ....................................................................................................................................................................
Use either of the LCD [▲/▼] controls under
MODE on the display to select one of the available
play modes.
ALL

All 14 demo songs are played
back in sequence.

RANDOM

All 14 demo songs are played back
in random order. This is the default
mode.

SINGLE SONG

Only the selected song is played.

X Select a Song .........................................................
Press the LCD button corresponding to the type
of demo song you want to play, then use the same
LCD button to select either of the two demo songs
in that group. You can also use either of the LCD [▲/
▼] controls under SONG on the display to select any
of the 14 demo songs.

C Turn the Repeat Mode ON or OFF .............................................................................................................................
Use the REPEAT LCD [▲/▼] control to turn
repeat playback ON or OFF as required (when ON,
the selected song or sequence of songs will be
repeated until the STOP LCD button is pressed)

V Start & Stop Playback as Required .........................................................................................................................
Press the START LCD button to start playback of
the selected demo song(s). Press the STOP LCD
button when you want to stop playback.

B Exit When Done ............................................................................................................................................................................
Press either the [DEMO] button or the [EXIT]
button to exit from the demo mode and return to the
normal play-mode display when you’ve finished
playing the demo songs.

DEMO
EXIT

The PSR-4000 Display & Display-based Controls
The Display & Multi-function Controls
The PSR-4000 makes general operation and programming easier than ever with a large backlit LCD display
panel and multi-function controls. The 8 LCD selectors
— four on either side of the display panel — and 8 LCD
[▲/▼] controls below the display perform the function
indicated by the adjacent section of the display. In the
example display shown here, for example, the LCD [▲/
▼] control immediately below LEAD on the display can
be used to adjust the volume of the LEAD voice. Press the
[▲] end of the control to increase the volume, or the [▼]
end of the control to decrease the volume. In the same
way, the LCD button immediately to the right of LEAD on
the display is used to set the normal octave for the lead
voice (“0”), shift it one octave up (“+1”), or one octave
down (“–1”).

■

The [MIXER] Button ..................................................................................................................................................................
The lower section of the normal play mode
display, shown above, provides individual volume
controls for the PSR-4000’s song, multi pad, accompaniment, left, right 1, right 2, and lead sound.
Pressing the ACCOMP. VOLUME LCD button
switches to the individual auto-accompaniment part
volume controls: rhythm 1, rhythm 2, bass, chord 1,
chord 2, pad, phrase 1, and phrase 2. This is essentially a “mixer” that you will use the achieve the best
overall balance for your musical needs. The mixer
controls will disappear when functions which have
different displays are selected, but can be instantly
recalled without exiting from the current display
mode by pressing the [MIXER] button. Pressing the
[MIXER] button a second time (or the [EXIT]
button) causes the mixer controls to disappear.

MIXER

LIST
HOLD

The PSR-4000 Display & Display-based Controls
■

The [LIST HOLD] Button ......................................................................................................................................................
When selecting voices (page 14) or accompaniment styles (page 22), or using the ONE TOUCH
SETTING feature (page 31), the voice, style, or
ONE TOUCH SETTING list will appear on the
display, but will automatically disappear after a few
seconds if no selections are made. The list can be
kept on the display for as long as required by
pressing the [LIST HOLD] button so that its LED
lights. Press [LIST HOLD] a second time (the LED
will go out) to disengage the list hold function.
MIXER

NOTES

LIST
HOLD

• If the [LIST HOLD] button is engaged when a list is not
showing, the list will not appear even when a voice group,
style group, or ONE TOUCH SETTING button is pressed.

■

The [LCD CONTRAST] Control .....................................................................................................................................
The PSR-4000 display panel is a liquid-crystal
type which features a [LCD CONTRAST] control.
Use the [LCD CONTRAST] control to set the
display for optimum legibility.

LCD
CONTRAST

Playing the PSR-4000
■ Before You Begin

DEMO

Before playing your PSR-4000 for the first
time, it might be a good idea to re-initialize it to
the original factory settings just in case these have
been changed at some point before you receive
the instrument. To do this, turn the [POWER]
switch ON while holding the [DEMO] and [EXIT]
buttons.

POWER

EXIT

When the display shown to the right appears
press the OK LCD button.
• When the above initialization procedure is carried
out, all internal data (e.g. REGISTRATION, CUSTOM ACCOMP, CUSTOM VOICE, MULTI PAD) will
also be initialized and therefore lost!

Selecting & Playing Voices
The PSR-4000 allows you to individually select and play up to four “orchestra parts” at the same time in a number
of ways. A range of voices can be assigned to each orchestra part.

RIGHT ORCHESTRA 1
RIGHT ORCHESTRA 2

Both the RIGHT 1 and RIGHT 2 voices are polyphonic voices which can be played over
the entire keyboard or to the right of a specified split point. The default split point is the F#2
key. Either voice can be played alone, or both can be played simultaneously. The RIGHT 1
and RIGHT 2 voices can be selected from a range of 243 voices organized in 12 groups.

LEAD

This is a monophonic voice which can be played over the entire keyboard or to the right of
a specified split point. The default split point is the F#2 key. The LEAD voice can be played
alone, or simultaneously with either or both of the RIGHT ORCHESTRA voices. The LEAD
voice can be selected from a range of 110 voices organized in 6 groups.
When only the LEAD voice is being played it has “last note priority”. That is, only the last
note played will sound. When the LEAD voice is being played with a RIGHT ORCHESTRA
voice it has “highest note priority” — the highest note is played by the LEAD voice.

LEFT ORCHESTRA

A polyphonic voice which can be played to the left of a specified split point while the
RIGHT 1, RIGHT 2, and/or LEAD voices are played to the right of the split point. The default split point is the F#2 key. The LEFT voice can be selected from a range of 200 voices
organized in 6 groups.
* Voice numbers include Custom Voice.

Playing the PSR-4000
Z Set Initial Volume Levels .....................................................................................................................................................
Set the [MASTER VOLUME] control to an
appropriate level, and make sure that the LEFT, R1,
R2, LEAD volume levels in the MIXER MAIN
VOLUME display are set to their maximum “100”
levels (use the corresponding LCD [▲/▼] controls
to set these volume levels if necessary). You can set
the [MASTER VOLUME] control for the most
comfortable overall volume level after beginning to
play.

MASTER VOLUME

MIN •

• MAX

NOTES

• No sound will be produced if all volume levels other than
the [MASTER VOLUME] control are set to their minimum
values.

X Select the Orchestra Parts You Want To Play ................................................................................................
Press the [RIGHT 1], [RIGHT 2], [LEAD], and/or [LEFT] button(s), turning on the
indicators corresponding to the parts you want to play.
Each time you turn a part on or off, the EASY SETTING LCD button for that part will
appear on the LCD for a few seconds.

LEFT ORCHESTRA

RIGHT ORCHESTRA

PIANO /
ORGAN
STRINGS /
CHOIR

ACCORDION/
WORLD

TRUMPET/
BRASS

ORGAN

SYNTH/
PAD

SAX/
WOODWIND

BRASS/
WOODWIND

STRINGS/
CHOIR

SOUND
EFFECT

STRINGS/
CHOIR

SYNTH /
PAD

SAX/
WOODWIND

PERCUSSIVE

GUITAR/
BASS

TRUMPET/
BRASS

DRUM KIT

SYNTH/
PERCUSSIVE

CUSTOM
VOICE

GUITAR/
BASS

CUSTOM
VOICE

LEFT

RIGHT 1

RIGHT 2

LEAD

GUITAR/
PERCUSSIVE

LEFT HOLD

PART SELECT

LEAD

PIANO

Playing the PSR-4000

If you press the EASY SETTING LCD button
before it disappears, the easy-setting display for that
part will appear providing access to the split point
parameters as well as the individual octave, pan, and
tune parameters for that part. These same parameters can be accessed via the FUNCTION displays
(page 98), but the easy-setting displays offer an
easier, more efficient way to set these parameters
when selecting parts. The easy setting display for a
part that is already on can be accessed by pressing
the EASY SETTING LCD button while holding the
corresponding part button (in this case the part
button indicator will not go out when the button is
released). See the following pages for details on
each of the orchestra part easy setting parameters:
NOTES

• The more parts you play simultaneously, the fewer the
total number of notes that can be played on the keyboard
at the same time.
• When the RIGHT 1 and RIGHT 2 parts are both on and the
same voice is selected for both parts, the sound may be
slightly different from the normal voice.
• When the LEFT part is on, the left voice will automatically
be transposed up one octave.

SPLIT POINT [L]

Page 16

SPLIT POINT [A]

Page 27

OCTAVE

Page 101

PAN

Page 101

TUNE

Page 100

C Select a Voice or Voices ........................................................................................................................................................
To select a RIGHT 1 or RIGHT 2 voice use the RIGHT ORCHESTRA voice selectors, to select a LEAD
voice use the LEAD voice selectors, and to select a LEFT voice use the LEFT ORCHESTRA voice selectors.
When selecting a RIGHT 1 or RIGHT 2 voice it is also necessary to press the [R1] or [R2] PART SELECT
button prior to actually selecting the voice, according to whether you want to select a RIGHT 1 or RIGHT
2 voice (this is not necessary if the [R1] or [R2] indicator for the part you want to select is already lit).
Use the voice group buttons to select the group from which you want to select a voice. The corresponding
voice display will appear.
LEFT ORCHESTRA

NOTES

• The display will automatically revert to
the main display after a few seconds if
the [LIST HOLD] button is not engaged (page 11).
• Custom voices which can be selected
via the RIGHT ORCHESTRA, LEFT
ORCHESTRA, and LEAD [CUSTOM]
buttons can be created via the CUSTOM VOICE EDIT mode described on
page 78, or loaded from disk.
LEFT HOLD

RIGHT ORCHESTRA

PIANO /
ORGAN
STRINGS /
CHOIR

PART SELECT

LEAD

PIANO

ACCORDION/
WORLD

TRUMPET/
BRASS

ORGAN

SYNTH/
PAD

SAX/
WOODWIND

BRASS/
WOODWIND

STRINGS/
CHOIR

SOUND
EFFECT

STRINGS/
CHOIR

SYNTH /
PAD

SAX/
WOODWIND

PERCUSSIVE

GUITAR/
BASS

TRUMPET/
BRASS

DRUM KIT

SYNTH/
PERCUSSIVE

CUSTOM
VOICE

GUITAR/
BASS

CUSTOM
VOICE

LEFT

RIGHT 1

RIGHT 2

LEAD

GUITAR/
PERCUSSIVE

Playing the PSR-4000

Use the page-number LCD [▲/▼] controls the
select the page containing the voice you want if
more than one page is available, then press the LCD
button corresponding to the desired voice. You can
also use either of the SELECT LCD [▲/▼] controls
to select any of the voices within the selected group.

V Play & Adjust Volume ..............................................................................................................................................................
You can now play the selected voice or voices on
the keyboard. Use the [MASTER VOLUME] control to adjust the overall volume level, and the
MIXER MAIN VOLUME LCD [▲/▼] controls to
set the desired balance between the parts.

Keyboard Percussion
When one of the RIGHT ORCHESTRA [DRUM KIT]
voices is selected, you can play 61 different drums and
percussion instruments on the keyboard. The drums and
percussion instruments played by the various keys are
marked by symbols above the keys. Some of the instruments in the different drum kit voices sound different
even though they have the same name, while others are
essentially the same.

NOTES

• When the DRUM KIT voice OCTAVE parameter is set to “–1”, 11
different instruments are available in the lowest octave.
• The Transpose, Tune, Sustain, Harmony, Left Hold, Modulation, and Pitch Bend functions do not affect the DRUM KIT
voices.
• See page 129 for a complete listing of the keyboard percussion
drum instrument assignments.

Playing the PSR-4000

Changing the “L” Split Point
The PSR-4000 has two programmable split points — one which divides the LEFT and RIGHT/LEAD orchestra
parts, and one which divides the auto-accompaniment and manual sections of the keyboard when AUTO BASS
CHORD accompaniment (page 27) is engaged. In the split point displays accessed by the EASY SETTING LCD
button described below, and the FUNCTION displays (page 102), the former is indicated by the “L” marker and the
latter by the “A” marker above the graphic keyboard. The current split points are indicated on the display both by
the split markers and the “splits” in the graphic keyboard. We’ll look at the ABC (“A”) split point in more detail in
“Using the Accompaniment Section”, page 27. For now, here’s how you can change the “L” split point via the
orchestra part easy-setting displays to suit your own playing requirements.

Z Select an Orchestra Part Easy Setting Display ..........................................................................................
Select an orchestra part easy-setting display either by turning a part on or off and pressing the
EASY SETTING LCD button before it disappears,
or by pressing the EASY SETTING LCD button
while holding an orchestra part button that is already
on.

X Set the Split Point .......................................................................................................................................................................
The split point can be set in two ways: either use
the SPLIT POINT L LCD [▲/▼] controls, or press
the desired key on the keyboard while holding the L
DIRECT SETTING LCD button (or vice-versa).
The new split point will be indicated on the graphic
keyboard in the LCD.
NOTES

• The “L” split point cannot be set lower than the “A” split
point.
• When the “L” and “A” split points are set at different keys,
the LEFT voice can be played between the “A” and “L” split
points when the AUTO BASS CHORD function on. When
the “L” and “A” split points are set to the same key, the
LEFT voice can be played anywhere to the left of the “L”
and “A” split points.

C Return to the Previous Display
When Done .......................................
Press the EXIT LCD button or [EXIT] panel
button to return to the previous display when done.

Press a key while holding the
L DIRECT SETTING LCD button.

Transposition, Tuning,
& Octave Change
The most important and fundamental adjustment for any musical
instrument is tuning. The TRANSPOSE, TUNING, and OCTAVE
CHANGE functions described below let you control the pitch of the
PSR-4000 in a number of ways.

TRANSPOSE & TUNE
These functions allow the overall pitch of the PSR-4000 to be transposed up or down in semitone steps, and finetuned in 0.2 Hertz steps.

Z Press the TRANSPOSE/TUNE LCD Button .....................................................................................................
Select the transpose and tune functions from the
normal play mode display by pressing the TRANSPOSE/TUNE LCD button.

X Set the Transposition and/or Tuning As Required ...................................................................................
Use the TRANSPOSE LCD [▲/▼] controls to
set the desired degree of transposition, and the
TUNE LCD [▲/▼] controls to set the desired degree of tuning.
The transpose range is from –24 to +24, allowing a maximum upward or downward transposition
of 2 octaves. A setting of “0” produces the normal
pitch.
The tuning range is from 414.6 Hertz to 466.8
Hertz, adjustable in 0.2-Hertz steps. A3 = 440.0
Hertz is “normal” pitch.

C Return to the Main Display When Done ..............................................................................................................
Press the MAIN VOLUME LCD button to exit
from the transpose and tune functions and return to
the main display.

Transposition, Tuning, & Octave Change

OCTAVE CHANGE
This function allows the LEFT, RIGHT 1, RIGHT 2, and LEAD voices to be independently transposed up or down
by one octave.
The LEFT, R1, R2, and LEAD LCD buttons directly
set the octave of the corresponding voice. Pressing one of
these buttons changes the corresponding octave setting to
“+1”, “–1”, and then “0”, in sequence. “+1” shifts the
voice up one octave “–1” shifts the voice down one
octave, and “0” sets the voice to its normal octave.
NOTES

• These parameters are also available in the F1 VOICE PART
function display — page 101.
• Some voices may suddenly shift octaves when played at the
extreme ends of the keyboard if they are set to a lower or higher
octave than normal. This can also occur when the PITCH BEND
wheel is used on extremely low or high notes.
• If you change the transpose, octave change, or tuning settings
while playing one or more notes on the keyboard, the new octave
change settings will take effect from the next notes played while
tune and transpose settings take effect immediately.

Using the Accompaniment Section
The PSR-4000 has 120 different preset accompaniment “styles”
and up to 12 custom accompaniment styles that can be used to provide fully-orchestrated or rhythm-only accompaniment. The PSR4000’s sophisticated Auto Bass Chord accompaniment system can
provide automated bass and chord backing that is perfectly matched
to the selected accompaniment style.

Z Turn ABC ON ....................................................................................................................................................................................
Press the [AUTO BASS CHORD] button so that
its indicator lights, thereby turning the ABC mode
on.

ACCOMPANIMENT
ROCK /
ROCK’N’ROLL

JAZZ

POP / BEAT

LATIN

BALLAD

COUNTRY&
WESTERN

DANCE

MARCH /
WALTZ

DISCO

BALLROOM

RHYTHM &
BLUES

CUSTOM
STYLE

NOTES

• Rhythm-only accompaniment will be produced if you don’t
turn the [AUTO BASS CHORD] button on.
• The maximum number of notes that can be played simultaneously on the PSR-4000 keyboard is reduced when
the Auto Bass Chord feature is used.
• The PSR-4000 employs “last-note priority”, which means
that when the number of notes played on the keyboard
exceeds the total number that can be produced by the
PSR-4000 at that time, the last notes played take priority.

ONE TOUCH
SETTING

AUTO BASS CHORD

X Select the Desired ABC Mode .......................................................................................................................................
Press the ABC EASY SETTING LCD button
immediately after pressing the [AUTO BASS
CHORD] button to select the ABC MODE and
SPLIT POINT display. Use the ABC MODE LCD
[▲/▼] controls to select the SINGLE FINGER,
FINGERED 1, FINGERED 2, FULL KEYBOARD,
AUTO MIDI BASS, or MANUAL MIDI BASS
mode. If you select the MANUAL MIDI BASS
mode, and press the BASS VOICE LCD button
which appears, you can use the GROUP LCD [▲/
▼] controls to specify the bass voice to be used.
Press the ABC MODE LCD button to return to the
ABC MODE display as required.
Press the EXIT LCD button or [EXIT] panel
button to return to the main display when done.
The SINGLE FINGER, FINGERED 1, FINGERED 2, FULL KEYBOARD, AUTO MIDI BASS
and MANUAL MIDI BASS modes function as
follows:

Using the Accompaniment Section

● SINGLE FINGER (SF)
Single-finger accompaniment makes it simple to
produce beautifully orchestrated accompaniment
using major, seventh, minor and minor-seventh chords
by pressing a minimum number of keys on the lefthand section of the keyboard. The abbreviated chord
fingerings described below are used:
C

Cm 7

■ For a major chord, press the root key only.
■ For a minor chord, simultaneously press the root
key and a black key to its left.
■ For a seventh chord, simultaneously press the root
key and a white key to its left.
■ For a minor-seventh chord, simultaneously press
the root key and both a white and black key to its
left.

● FINGERED 1 (FC1)
This is the default ABC mode. The FINGERED
1 mode lets you finger your own chords on the ABC
section of the keyboard (i.e. all keys to the left of and
including the split-point key — normally F#2),
while the PSR-4000 supplies appropriately orchestrated rhythm, bass, and chord accompaniment in
the selected style.
The FINGERED 1 mode will accept the 34 chord
types.

● FINGERED 2 (FC2)
This mode accepts the same fingerings as the
FINGERED 1 mode, but the lowest note played in
the ABC section of the keyboard is used as the bass
root, allowing you to play “on bass” or “fraction”
chords (in the FINGERED 1 mode the root of the
chord is always used as the bass root).

Using the Accompaniment Section

● FULL KEYBOARD
When this advanced auto-accompaniment mode
is engaged the PSR-4000 will automatically create
appropriate accompaniment while you play just
about anything, anywhere on the keyboard: chords,
a bass line, arpeggiated chords, a melody line. The
name of the detected chord will appear on the
display. You don’t have to worry about specifying
the accompaniment chords. Although the FULL
KEYBOARD mode is designed to work with many
songs, some arrangements may not be suitable for
use with this feature. Try playing a few simple songs
in the FULL KEYBOARD mode to get a feel for its
capabilities.
NOTES

• Chord detection occurs at approximately 8th-note intervals. Extremely short chords — less than an 8th note in
length — may therefore not be detected.

● AUTO MIDI BASS
In this mode all accompaniment parts except the
bass part respond to the chord played on the keyboard. Fingering is the same as in the FINGERED 1
mode. If more than three notes are played on the
ABC section of the keyboard in this mode, and if the
chord played is not recognized by the PSR-4000,
only the top three are used for chord recognition. All
others are ignored. The bass part is determined by
the note played on an external MIDI bass keyboard
connected to the MIDI IN terminal and assigned to
the MIDI Bass channel (page 120).

● MANUAL MIDI BASS
In this no chord recognition occurs. All accompaniment parts other than the rhythm part are muted,
and a MIDI bass keyboard connected to the MIDI IN
connector and assigned to the MIDI Bass channel
(page 120) directly plays the bass voice selected via
the BASS VOICE parameter that appears when the
MANUAL MIDI BASS mode is selected in the ABC
easy-setting display.

Using the Accompaniment Section
C Select a Style ...................................................................................................................................................................................
ACCOMPANIMENT

The PSR-4000 has 120 preset styles organized in
11 groups (see the “Style List” on page 130).
Use the ACCOMPANIMENT group buttons to
select the group from which you want to select a
style. The corresponding style display will appear.

ROCK /
ROCK’N’ROLL

JAZZ

POP / BEAT

LATIN

BALLAD

COUNTRY&
WESTERN

DANCE

MARCH /
WALTZ

DISCO

BALLROOM

RHYTHM &
BLUES

CUSTOM
STYLE

ONE TOUCH
SETTING

NOTES

• The display will automatically revert to the main display
after a few seconds if the [LIST HOLD] button is not
engaged (page 11).

AUTO BASS CHORD

• For easy selection some styles are repeated in different
groups.
• Custom styles which can be selected via the ACCOMPANIMENT [CUSTOM] button can be created via the CUSTOM ACCOMPANIMENT RECORD mode described on
page 69, or loaded from disk.

Use the page-number LCD [▲/▼] controls to
select the page containing the style you want if more
than one page is available, then press the LCD
button corresponding to the desired style. You can
also use either of the SELECT LCD [▲/▼] controls
to select any of the styles within the selected group.
The PSR-4000 automatically determines the voices
to be used for the accompaniment bass and chords
according the accompaniment style you select.
NOTES

• Also see “Custom Accompaniment” on page 69.
• The custom style button can be used to access SFF
(optional style file format) disks that have been loaded.

V Set the Tempo .................................................................................................................................................................................
When you select a different style while the accompaniment is not playing, the “default” tempo for
that style is also selected, and the tempo is displayed
on the display in quarter-note beats per minute. If
the accompaniment is playing, the same tempo is
maintained even if you select a different style.
You can change the tempo to any value between
32 and 280 beats per minute, however, by using the
TEMPO [–] and [+] buttons. This can be done either
before the accompaniment is started or while it is
playing. To use the [–] and [+] buttons, press either
button briefly to decrement or increment the tempo
value by one, or hold the button for continuous
decrementing or incrementing.
NOTES

• The default tempo for the selected style can be recalled at
any time by pressing both the TEMPO [–] and [+] buttons
simultaneously.

TEMPO
–

Tempo

Using the Accompaniment Section
B Start the Accompaniment ..................................................................................................................................................
There are several ways to start the accompaniment:
● Straight start: Press the [START/STOP] button. If you press the [START/STOP] button, the
rhythm will begin playing immediately without
bass and chord accompaniment.

INTRO/
FILL to

FADE
IN / OUT

ENDING/
rit.

MAIN

SYNCHRO
START

START/STOP

SYNCHRO
START

START/STOP

SYNCHRO
START

START/STOP

SYNCHRO
START

START/STOP

ACCOMPANIMENT DIRECTOR

NOTES

• It is also possible to select one of the several variations
available prior to a straight start — refer to “7. Select
Variations as Required,” below.

● Start with an introduction followed by the
MAIN A variation: press the [INTRO A/FILL
to A] button.

INTRO/
FILL to

FADE
IN / OUT

ENDING/
rit.

MAIN

ACCOMPANIMENT DIRECTOR

● Start with an introduction followed by the
MAIN B variation: press the [INTRO B/FILL
to B] button.

● Synchronized start: Any of the above start
types can be synchronized to the first note or
chord played on the ABC section of the keyboard
(i.e. keys to the left of and including the splitpoint key — normally F#2) by first pressing the
[SYNCHRO START] button. Pressing the
[SYNCHRO START] button alone causes a
straight start to occur when the first note or chord
is played. Press [SYNCHRO START] and the
appropriate INTRO button (or vice-versa) for a
synchronized introduction start. The first dot of
the TEMPO display will flash at the current
tempo when a synchronized start mode has been
selected.

INTRO/
FILL to

FADE
IN / OUT

ENDING/
rit.

MAIN

ACCOMPANIMENT DIRECTOR

INTRO/
FILL to

FADE
IN / OUT

ENDING/
rit.

MAIN

ACCOMPANIMENT DIRECTOR

NOTES

• If you press the [SYNCHRO START] button while the
accompaniment is playing, the accompaniment will stop
and the synchro start mode will be engaged.
• The four LED dots of the TEMPO display provide a visual
indication of the selected tempo as shown to the left.
• A Yamaha FC5 footswitch plugged into a rear panel
FOOT SWITCH jack can also be used to start the accompaniment if the appropriate function is assigned to the
footswitch using the FOOT SWITCH functions described
on page 104.

4/4 Time
TEMPO

3/4 Time
TEMPO

1st Beat
2nd Beat
3rd Beat
4th Beat

Using the Accompaniment Section
N Play On the ABC Section Of the Keyboard .....................................................................................................
As soon as you play any chord that the PSR-4000
can “recognize” on the ABC section of the keyboard
in one of the FINGERED modes or the AUTO MIDI
BASS (see fingering chart on page 134), an abbreviated chord in the SINGLE FINGER mode, or just
about anything anywhere on the keyboard in the
FULL KEYBOARD mode, the PSR-4000 will automatically begin to play the chord along with the
selected rhythm and an appropriate bass line. The
accompaniment will continue playing even if you
release the left-hand keys.
If the MANUAL MIDI BASS mode is selected
only the rhythm accompaniment will play automatically, and selected bass voice can be played via a
MIDI bass keyboard.

Split Point
▼

ABC Section

Melody Section

NOTES

• The appropriate chord and bass note will sound if you play
in the ABC section of the keyboard while the ABC function
is on but the accompaniment is stopped (but not in the
FULL KEYBOARD and MANUAL MIDI BASS modes).
Please note that the Left Hold function (page 35) cannot
be applied to these chord and bass notes.

M Select Sections as Required ...........................................................................................................................................
Each accompaniment style has two sections:
MAIN A and MAIN B. There is also an ENDING
section which is described in step >. The INTRO A
and B sections can be used to start the accompaniment as described in the preceding step. The MAIN
A and B sections can be selected manually by
pressing the corresponding section button.
NOTES

• Some INTRO and ENDING sections have their own chord
progressions which play in the current accompaniment
key — the current chord is shown below the style name in
the LCD display.

INTRO/
FILL to

FADE
IN / OUT

ENDING/
rit.

MAIN

ACCOMPANIMENT DIRECTOR

SYNCHRO
START

START/STOP

Using the Accompaniment Section
< Use Fill-ins ..........................................................................................................................................................................................
The PSR-4000 provides two types of automatic
breaks or “fill-ins.”

● FILL to A: Press the [INTRO A/FILL to A]
button to produce a fill and go (or return) to the
MAIN A section.

INTRO/
FILL to

FADE
IN / OUT

ENDING/
rit.

MAIN

SYNCHRO
START

START/STOP

SYNCHRO
START

START/STOP

ACCOMPANIMENT DIRECTOR

● FILL to B: Press the [INTRO B/FILL to B]
button to produce a fill and then go (or return) to
the MAIN B section.

INTRO/
FILL to

FADE
IN / OUT

ENDING/
rit.

MAIN

ACCOMPANIMENT DIRECTOR

It is possible to change the section that will play
after the fill-in by pressing the appropriate section
button while the fill-in is playing.
NOTES

• A Yamaha FC5 footswitch plugged into a rear panel
FOOT SWITCH jack can also be used to activate the intro
and fill-in functions if the appropriate function is assigned
to the footswitch using the FOOT SWITCH functions
described on page 104.

> Stop the Accompaniment ...................................................................................................................................................
The accompaniment can be stopped at any time
by pressing the [START/STOP] button. Press the
[ENDING/rit.] button if you want to go to the
ending section and then stop. Press the [ENDING/
rit.] button while the ending section is playing to
produce a “ritardando” ending — i.e. the tempo
gradually slows down during the ending.

INTRO/
FILL to

FADE
IN / OUT

ENDING/
rit.

MAIN

SYNCHRO
START

START/STOP

ACCOMPANIMENT DIRECTOR

Using the Accompaniment Section
■

Fade-ins and Fade-outs .......................................................................................................................................................
The [FADE IN/OUT] button can be used to
produce smooth fade-ins and fade-outs when starting and stopping the accompaniment.
To produce a fade-in, press the [FADE IN/OUT]
button so that its indicator lights before starting the
accompaniment. Then when the accompaniment is
started the sound will gradually fade in. The [FADE
IN/OUT] indicator will flash during the fade-in,
and then go out when full volume has been reached.
To produce a fade-out press the [FADE IN/
OUT] button while the accompaniment is playing.
The indicator will flash during the fade out, then the
accompaniment will stop when the fade-out is complete. The [FADE IN/OUT] button indicator will
remain lit after the fade-out, indicating that the fadein mode is engaged. Press the [FADE IN/OUT]
button so that its indicator goes out if you want to
disengage the fade-in mode.

■

INTRO/
FILL to

FADE
IN / OUT

ENDING/
rit.

MAIN

SYNCHRO
START

START/STOP

ACCOMPANIMENT DIRECTOR

NOTES

• A Yamaha FC5 footswitch plugged into a rear panel FOOT
SWITCH jack can also be used to activate the fade-ins and fadeouts functions if the appropriate function is assigned to the
footswitch using the FOOT SWITCH functions described on
page 104.

Accompaniment Volume .....................................................................................................................................................
Use the various LCD [▲/▼] controls in the
MIXER ACCOMPANIMENT VOLUME display
to set the best balance between the corresponding
accompaniment parts, and the optimum volume of
the accompaniment parts in relation to the orchestra
part voices.

■

The Auto Mute Function ......................................................................................................................................................
When the EASY SETTING ABC display is selected, or when the F2 SPLIT POINT/ABC MODE
display is selected, the AUTO MUTE LCD button
will appear as long as the MANUAL MIDI BASS
ABC mode is not selected. When this function is
turned ON certain AUTO BASS CHORD parts will
either stop playing or play with reduced volume
whenever the right-hand keys are played — so that
the accompaniment does not “get in the way” of
what you play on the keyboard. Normal accompaniment playback resumes when no right-hand keys are
being played.
NOTES

• The AUTO MUTE function will not work with some styles.

Using the Accompaniment Section

Changing the “A” Split Point
The “L” split point has already been described on page 16. The “A” split point divides the auto-accompaniment
and manual sections of the keyboard when AUTO BASS CHORD accompaniment (page 19) is engaged. Like the
“L” split point, the “A” split point can be changed as required via the ABC EASY SETTING display, or the SPLIT
POINT/ABC MODE/M. PAD function display (pages 102). The current split points are indicated on the display
both by the split markers and the “splits” in the graphic keyboard.

Z Select the ABC EASY SETTING Display ............................................................................................................
Select the AUTO BASS CHORD easy-setting
display either by turning the [AUTO BASS CHORD]
button on and pressing the EASY SETTING LCD
button before it disappears, or by pressing the EASY
SETTING LCD button while holding the [AUTO
BASS CHORD] button.

X Set the Split Point .......................................................................................................................................................................
The split point can be set in two ways: either use
the SPLIT POINT A LCD [▲/▼] controls, or press
the desired key on the keyboard while holding the A
DIRECT SETTING LCD button. The new split
point will be indicated on the graphic keyboard in
the LCD.
NOTES

• The “A” split point cannot be set higher than the “L” split
point.
• When the “L” and “A” split points are set at different keys,
the LEFT voice can be played between the “A” and “L” split
points when the AUTO BASS CHORD function on. When
the “L” and “A” split points are set to the same key, the
LEFT voice can be played anywhere to the left of the “L”
and “A” split points.

C Return to the Previous Display When Done ..................................................................................................
Press the EXIT LCD button or [EXIT] panel
button to return to the previous display when done.

Using the Accompaniment Section

The Chord Assist Function
The Chord Assist function is essentially an electronic “chord book” that will show you appropriate fingerings for
chords you enter via the display. The fingerings are indicated by dots on the graphic keyboard in the display, and
correspond to those recognized in the ABC FINGERED 1 mode. You can also play chords on the keyboard in the
same way as in the ABC FINGERED 1 mode.

Z Select the Chord Assist Function .............................................................................................................................
Select the CHORD ASSIST display either by
turning the [AUTO BASS CHORD] button on and
pressing the CHORD ASSIST LCD button before it
disappears, or by pressing the CHORD ASSIST
LCD button while holding the [AUTO BASS
CHORD] button.
When the CHORD ASSIST function is selected
the ABC FINGERED 1 mode will automatically be
selected and the split point will be set at C#3.

X Start the Accompaniment ..................................................................................................................................................
Start the accompaniment by using any of the
methods described on page 23.

C Select the Chord Root and Type .................................................................................................................................
Use the ROOT LCD [▲/▼] control to select the
desired chord root.
Use the TYPE LCD [▲/▼] control to select the
chord type.
The selected chord root and type will appear on
the graphic keyboard display, and the same chord
will appear in notation form on the musical staff
under “selected CHORD” in the upper half of the
display.

Using the Accompaniment Section
V Hear the Chord ...............................................................................................................................................................................
At this point you can “play” and hear the specified chord by pressing the ENTER LCD button —
i.e. the specified chord accompaniment will sound
and the chord will appear in notation form on the
musical staff under “played CHORD” in the upper
half of the display.
NOTES

• Chords which are recognizable by the PSR-4000 CHORD
ASSIST function can also be entered by playing them on
the ABC section of the keyboard. The chord will appear in
notation form on the musical staff under “played CHORD”
in the upper half of the display.

B Invert the Fingering as Necessary ...........................................................................................................................
Use the INVERSION LCD [▲/▼] controls to
shift the fingering up or down the keyboard. Each
time an INVERSION LCD [▲/▼] control is pressed
the next viable fingering (inversion) appears on the
graphic keyboard display and the musical staff below “selected CHORD”.

N Stop the Accompaniment ...................................................................................................................................................
Press the [START/STOP] button to stop the
accompaniment.

M Exit When Done ............................................................................................................................................................................
Press the EXIT LCD button or the panel [EXIT]
button to exit from the Chord Assist function.

Using the Accompaniment Section

The Arranger Buttons
The ARRANGER buttons make it possible to individually mute accompaniment parts to create the
blend and accompaniment “size” you want. When
an ARRANGER button is pressed so that its indicator goes out, the corresponding accompaniment
part(s) are muted. Muted parts can be turned back on
by pressing the appropriate ARRANGER button so
that its indicator lights. The ARRANGER buttons
correspond to the following accompaniment parts:

PHRASE

PHRASE 1, PHRASE 2

PAD

CHORD

CHORD 1, CHORD 2

BASS

RHYTHM

RHYTHM 1, RHYTHM 2

ARRANGER
PHRASE

PAD

CHORD

BASS

RHYTHM

One Touch Setting
The PSR-4000’s 120 internal styles each have 4 different preset
“panel setups” that can be selected via the [ONE TOUCH SETTING]
buttons to create different musical textures — e.g. different voices for
the accompaniment parts.

Z Engage the One Touch Setting Feature ..............................................................................................................
The ONE TOUCH SETTING feature can be
used either while an accompaniment is playing or
prior to starting an accompaniment by simply pressing the [ONE TOUCH SETTING] button and
selecting the desired ONE TOUCH SETTING setup
by pressing the appropriate LCD button.

ACCOMPANIMENT
ROCK /
ROCK’N’ROLL

JAZZ

POP / BEAT

LATIN

BALLAD

COUNTRY&
WESTERN

DANCE

MARCH /
WALTZ

DISCO

BALLROOM

RHYTHM &
BLUES

CUSTOM
STYLE

ONE TOUCH
SETTING

AUTO BASS CHORD

One Touch Setting
X Adjust The Settings If Necessary ..............................................................................................................................
Any of the parameters set by the ONE TOUCH
SETTING feature can be adjusted to create the
desired sound after a ONE TOUCH SETTING setup
has been selected.
NOTES

• See page 131 for a complete listing of the ONE TOUCH
SETTING setup parameters
• One Touch Settings can also be stored in the REGISTRATION memory.
• ONE TOUCH SETTING cannot be used with accompaniment styles created using the Custom Accompaniment
feature described on page 69. An error message will
appear on the display if a Custom Style is selected.

■

THE TEMPO SET FUNCTION ..........................................................................................................................................
The TEMPO SET LCD [▲/▼] controls in the
ONE TOUCH SETTING display can be used to turn
the ONE TOUCH SETTING TEMPO SET function
ON or OFF. When ON the tempo will change according to the tempo setting included in each ONE
TOUCH SETTING setup whenever a different setup
is selected. When OFF the tempo will not change
when a different setup is selected, regardless of the
tempo setting it includes.

Expression & Effects
■

Harmony ................................................................................................................................................................................................
Press the [HARMONY] button to turn the HARMONY effect on or
off. When HARMONY is on (indicator lit), playing single notes or
chords on the right-hand section of the keyboard produces automatic
harmony matched to the accompaniment chords. The harmony function
can be turned on when AUTO BASS CHORD accompaniment is off, but
in this case the harmony produced will consist only of unison and/or
octave notes.

HARMONY

SUSTAIN

TOUCH
RESPONSE

REVERB

CHORUS

DSP
EFFECT

NOTES

• The type of harmony produced can be selected via the HARMONY EASY
SETTING display, or via the HARMONY function display. See page 114 for
details.
• The harmony is based on the ABC chords, and is added to the highest note played
except when only the LEAD voice is on, in which case the harmony notes are
added to the last note played.
• The HARMONY feature cannot be turned on when the FULL KEYBOARD ABC
mode is selected.

■

Sustain ....................................................................................................................................................................................................
Press the [SUSTAIN] button to turn the sustain effect on or off. When
on (indicator lit), extra sustain is applied to the selected voice. When
sustain is applied via a footswitch, however, the panel [SUSTAIN]
button will not function.

HARMONY

SUSTAIN

TOUCH
RESPONSE

REVERB

CHORUS

DSP
EFFECT

NOTES

• Sustain can be applied to any combination of the LEFT, RIGHT 1, RIGHT 2 and
LEAD voices via the SUSTAIN BUTTON parameter available via the SUSTAIN
EASY SETTING display or the CONTROLLER function display. See page 104 for
details.
• The sustain effect may not produce the same effect for all voices.

■

Touch Response ..........................................................................................................................................................................
The touch response function turns the PSR-4000’s keyboard velocity
response on or off. Normally, touch response should be turned on — the
[TOUCH RESPONSE] button indicator should be lit — to allow
normal dynamic control via the keyboard (i.e. the harder the keys are
played, the louder the sound). In some cases, however, you might want
to turn touch response off (indicator off). For example, most organs have
no keyboard velocity response, so touch response can be turned off for
greater realism when playing organ type voices. Touch response can also
be turned off to create a constant-volume sound with any voice.
Use the [TOUCH RESPONSE] button to turn touch response on or
off as required.

HARMONY

SUSTAIN

TOUCH
RESPONSE

REVERB

CHORUS

DSP
EFFECT

NOTES

• Touch response sensitivity, off level, and voice assignments can be set via the
TOUCH EASY SETTING display, or via the CONTROLLER function display. See
page 107 for details.

Expression & Effects
■

Reverb .....................................................................................................................................................................................................
Press the [REVERB] button to apply the reverb effect specified by
the REVERB TYPE and DEPTH functions described on page 110. The
[REVERB] button alternately turns the reverb effect on (indicator lit) or
off (indicator out).

HARMONY

SUSTAIN

TOUCH
RESPONSE

REVERB

CHORUS

DSP
EFFECT

NOTES

• Reverb type and depth settings are available via the REVERB EASY SETTING
display, or via the REVERB/CHORUS/DSP EFFECT function display. See page
110 for details.
• Reverb type changes will apply to the note currently being played, while reverb
ON/OFF and depth changes will apply to the next note played.
• Although the [REVERB] indicator will go out, the reverb effect cannot be turned
off during accompaniment or song playback.

■

Chorus ....................................................................................................................................................................................................
Press the [CHORUS] button to apply the chorus effect at a depth
specified by the CHORUS DEPTH function described on page 112. The
[CHORUS] button alternately turns the chorus effect on (indicator lit)
or off (indicator out).

HARMONY

SUSTAIN

TOUCH
RESPONSE

REVERB

CHORUS

DSP
EFFECT

NOTES

• Chorus depth settings are available via the CHORUS EASY SETTING display,
or via the REVERB/CHORUS/DSP EFFECT function display. See page 110 for
details.
• Although the [CHORUS] indicator will go out, the chorus effect cannot be turned
off during accompaniment or song playback.

■

DSP Effects ........................................................................................................................................................................................
Press the [DSP EFFECT] button to apply the effect specified by the
DSP EFFECT TYPE and DEPTH functions described on page 112. The
[DSP EFFECT] button alternately turns the effect on (indicator lit) or
off (indicator out).
NOTES

• In the default setting, an appropriate DSP effect will automatically be selected
whenever a new voice is selected.
• DSP effect depth, type, and individual parameter settings are available via the
DSP EFFECT EASY SETTING display, or via the REVERB/CHORUS/DSP
EFFECT function display. See page 110 for details.
• Effect type changes will apply to the note currently being played, while effect ON/
OFF and depth changes will apply to the next note played.

HARMONY

SUSTAIN

TOUCH
RESPONSE

REVERB

CHORUS

DSP
EFFECT

Expression & Effects
■

Left Hold ................................................................................................................................................................................................
This function causes the LEFT orchestra part voice to be held even
when the keys are released. Non-decaying voices such as strings are held
continuously, while decay-type voices such as piano decay more slowly
(as if the sustain pedal has been pressed).

LEFT ORCHESTRA
PIANO /
ORGAN
STRINGS /
CHOIR
BRASS/
WOODWIND
SYNTH /
PAD
GUITAR/
PERCUSSIVE
CUSTOM
VOICE
LEFT HOLD

■

LEFT

Pitch Bend Wheel ........................................................................................................................................................................
The PITCH BEND wheel to the left of the keyboard lets you bend
the pitch of notes played on the keyboard up or down. Normal pitch is
restored when the PITCH BEND wheel is released. The maximum pitch
bend range is preset for each voice, but can be set as required for custom
voices by using the CUSTOM VOICE EDIT feature described on page
83.

PITCH BEND

MODULATION

MAX

DOWN

MIN

NOTES

• Pitch bend can be applied to the LEFT, RIGHT 1, RIGHT 2, and LEAD voices —
the PITCH BEND WHEEL parameter described on page 106 allows the pitch
bend wheel to be assigned any of these voices, singly or in any combination.
• The pitch bend wheel may cause sudden pitch changes when applied to notes
at the upper and lower extremes of the keyboard.

■

Modulation Wheel .......................................................................................................................................................................
The MODULATION wheel to the left of the keyboard lets you apply
modulation to notes played on the keyboard using the LEFT, RIGHT 1,
RIGHT 2, and LEAD orchestra part voices. Rolling the MODULATION wheel upward (away from you) increases the modulation depth.

PITCH BEND

MODULATION

MAX

DOWN

MIN

NOTES

• Modulation can be applied to the LEFT, RIGHT 1, RIGHT 2, and LEAD voices —
the MODULATION WHEEL parameter described on page 106 allows the modulation wheel to be assigned any of these voices, singly or in any combination.
• With some voices the MODULATION wheel changes the depth of effects or the
timbre of the sound.

The Multi Pads
The PSR-4000 features 8 “MULTI PADs” above the keyboard that can be used in
two ways:
● PHRASE/CHORD: When the PHRASE/CHORD mode is selected, the 4 pads marked “PHRASE”
and the 4 pads marked “CHORD” can be used to record and play back
short sequences of notes and chords, respectively.
● PERCUSSION:

In the PERCUSSION mode the pads can be used to play 8 different drum
and percussion instruments selected from the PSR-4000’s DRUM KIT
voices and Custom Voice DRUM KIT voice.
PERCUSSION
REC/STOP

PHRASE/CHORD
PLAYING

PHRASE

PHRASE/CHORD

CHORD

MULTI PAD
NOTES

• MULTI PAD data can be saved to floppy disk. See page 92 for details.

The PHRASE/CHORD Mode
To engage the PHRASE/CHORD mode, press the [PHRASE/
CHORD - PERCUSSION] button so that the PHRASE/CHORD
indicator lights (the PHRASE/CHORD and PERCUSSION indicators light alternately each time the button is pressed).

PERCUSSION
REC/STOP

PHRASE/CHORD

NOTES

• Preset data is initially recorded in pads 1 through 8.

The PHRASE Pads (pads 1 … 4)
Each PHRASE pad can record up to approximately 350 notes played using the RIGHT 1,
RIGHT 2, or LEAD voices (only one of these voices is recorded). The recorded phrases can then
be played back at any time — even while playing on the keyboard, with or without accompaniment. The PHRASE pads record the following data:
• Notes
• Key velocity (touch response)
• Voice number
• Volume
• Sustain
• Modulation
• Pitch bend
• PAN
• SOSTENUTO
• SOFT PEDAL
• Reverb depth
• Part tune

The Multi Pads
■

Recording Phrases ....................................................................................................................................................................
Z Select a PHRASE Pad For Recording

PERCUSSION
REC/STOP

Press the PHRASE pad you intend to record to
while holding the [REC/STOP] button. The REC/
STOP indicator will flash, indicating that the selected pad is ready to record.

PHRASE/CHORD
PLAYING

PHRASE

PHRASE/CHORD

CHORD

MULTI PAD

X Play a Phrase
Recording begins automatically as soon as you
play on the keyboard using the RIGHT 1, RIGHT 2,
or LEAD voice (see “NOTES”, below), and the
REC/STOP indicator will light continuously as long
as recording continues.
NOTES

• Only one voice can be recorded to the pads.
• If more than one voice is selected when the pad record
mode is engaged, the voice with the highest priority will be
used for recording. The RIGHT 1 voice has the highest
priority, followed by the RIGHT 2 voice, and then the
LEAD voice.
• The RIGHT 1 voice will automatically be selected if the
RIGHT 1, RIGHT 2, and LEAD voices are off when the pad
record mode is engaged.
• When a pad is recorded all previous data in that pad will
be erased and replaced by the new data.
• The preset pad data can be reloaded via the RECALL
PRESET DATA function described on page 115.
• Recorded phrases which are to be played using the
CHORD MATCH function (page 103) should be recorded
in the key of C major 7.
• You can record phrases while AUTO BASS CHORD
accompaniment is playing or stopped. In either case the
phrase will be recorded in relation to the currently set
accompaniment tempo, so it is a good idea to record
phrases while monitoring the accompaniment to ensure
that they are reproduced at an appropriate tempo when
played back with accompaniment.

C Stop Recording
Press the [REC/STOP] button to stop recording
when you’ve finished playing the phrase. The [REC/
STOP] button indicator will go out when recording
ends.

PERCUSSION
REC/STOP

PHRASE/CHORD
PLAYING

PHRASE

PHRASE/CHORD

CHORD

NOTES

• Recording will stop automatically if the PHRASE pad
memory becomes full (approximately 350 notes per pad),
or if another pad is pressed.

MULTI PAD

The Multi Pads
■

Phrase Playback ..........................................................................................................................................................................
As long as the PHRASE/CHORD mode is selected,
any recorded phrase can be played back simply by
pressing the corresponding PHRASE pad. The phrase
will play back whether the accompaniment is playing or
not, but will always play at the currently set tempo. The
PHRASE/CHORD PLAYING indicator will light while
the phrase plays back, and playback will end automatically as soon as the end of the phrase is reached. A
phrase can be stopped while it is playing by pressing
either the [REC/STOP] button or the corresponding
pad button. It is also possible to play back several
phrases at the same time.
If a PHRASE pad is played while AUTO BASS
CHORD accompaniment is playing and the CHORD
MATCH function for that pad is ON (see “The Repeat
& Chord Match Settings”, below), the phrase will be
automatically re-harmonized to match the accompaniment chords.

PERCUSSION
REC/STOP

PHRASE/CHORD
PLAYING

PHRASE

PHRASE/CHORD

CHORD

MULTI PAD

NOTES

• Phrase pad data can be saved to and loaded from disk (page
90), but can not be memorized by the Registration feature
(page 43).
• Use the M.PAD VOLUME control in the MIXER MAIN VOLUME display to adjust the playback volume of the phrase
pads.
• Only one pad can be played at a time in the SONG RECORD
mode (page 52).

The CHORD Pads (pads 5 … 8)
Each CHORD pad can record up to approximately 50 chords played on the left-hand
section of the keyboard when the AUTO BASS CHORD feature is engaged. The recorded
chords can then be played back when ABC is engaged and an accompaniment is playing.

■

Recording Chords ......................................................................................................................................................................
Z Select a CHORD Pad For Recording
Press the CHORD pad you intend to record to while
holding the [REC/STOP] button. The REC/STOP indicator will flash, indicating that the selected pad is ready
to record. If the accompaniment is stopped when the
CHORD pad is selected for recording, the SYNCHRO
START mode will automatically be engaged.
NOTES

• If AUTO BASS CHORD is OFF when a CHORD pad is
selected for recording, it will automatically be turned ON.
Further, if the MANUAL MIDI BASS mode is selected, the
FINGERED 1 mode will automatically be selected.

PERCUSSION
REC/STOP

PHRASE/CHORD
PLAYING

PHRASE

MULTI PAD

PHRASE/CHORD

CHORD

The Multi Pads

X Play the Required Chords
Recording begins automatically as soon as you play a chord
on the left-hand section of the keyboard, and the REC/STOP
indicator will light continuously as long as recording continues.

C Stop Recording

PERCUSSION
REC/STOP

Press the [REC/STOP] button or the pad being recorded to
stop recording when you’ve finished playing the chords. The
[REC/STOP] button indicator will go out when recording ends.

PHRASE/CHORD
PLAYING

3
NOTES

PHRASE/CHORD

CHORD

MULTI PAD

• Recording will stop automatically if the CHORD pad memory becomes
full (approximately 50 chords per pad); if another pad is pressed; or if the
accompaniment [START/STOP], or [SYNCHRO START] button is
pressed.
• Quarter note intervals are the smallest intervals possible to record.

■

Chord Playback .............................................................................................................................................................................
As long as the PHRASE/CHORD mode is selected and an
AUTO BASS CHORD accompaniment is playing, any recorded
chord sequence can be played back simply by pressing the
corresponding CHORD pad. The chord sequence will play back
at the currently set tempo. The PHRASE/CHORD PLAYING
indicator will light while the chord sequence plays back, and
playback will end automatically as soon as the end of the
sequence is reached. Only one chord sequence can be played at
a time.
During chord pad playback the AUTO BASS CHORD indicator will go out and the left-hand section of the keyboard plays in
the same way as the right-hand section. To indicate that the end
of the chord sequence is approaching, the PHRASE/CHORD
PLAYING indicator flashes during the last two measures (if the
REPEAT mode is not engaged — see below). A chord sequence
that is playing can be stopped by pressing the same chord pad
again, or by pressing the [REC/STOP] button. The AUTO BASS
CHORD function will continue playing the last chord played in
the chord sequence.

PERCUSSION
REC/STOP

PHRASE/CHORD
PLAYING

PHRASE/CHORD

CHORD

MULTI PAD

NOTES

• If you press a CHORD pad while the accompaniment is stopped or while
the AUTO BASS CHORD function is off, “Engage ABC to play the chord
pads” will appear on the display. Also, if AUTO BASS CHORD is on but
the MANUAL MIDI BASS mode is selected, “Engage SF, FC1, FC2,
FULL KEYBOARD, or AUTO MIDI BASS mode to play the chord pads”
will appear on the display, since chord playback will not function in the
MANUAL MIDI BASS mode.
• Chord pad data can be saved to and loaded from disk (page 90), but can
not be memorized by the Registration feature (page 43).
• Playback occurs in measure units. Playback will continue until the end of
the measure even if recording was stopped prior to the end of that
measure.

The Multi Pads
■

The Repeat & Chord Match Settings ......................................................................................................................
The repeat and chord match settings for PHRASE/
CHORD pad playback can be accessed by pressing
the EASY SETTING LCD button that appears when
the [PERCUSSION - PHRASE/CHORD] button
is pressed. Once the easy setting display has been
selected the repeat and chord match parameters can
be accessed by pressing the REPEAT or CHORD
MATCH LCD button.
Press either the EXIT LCD button or the panel
[EXIT] button when done.
NOTES

• The MULTI PAD repeat and chord match settings are also
available via the MULTI PAD FUNCTION display — page
103.

● REPEAT
When a check mark appears in a REPEAT box in
the REPEAT display, the corresponding pad —
PHRASE or CHORD — will playback repeatedly
until stopped by either pressing the same MULTI
PAD again, or by pressing the [REC/STOP] button.
Use the [▲/▼] LCD controls to turn repeat for
the corresponding pads ON or OFF as required.
NOTES

• The default repeat settings are: pads 1…4 OFF; pads
5…8 ON.

● CHORD MATCH
When a check mark appears in a CHORD MATCH
box in the CHORD MATCH display, the phrase
played by the corresponding PHRASE pad will be
automatically re-harmonized to match the accompaniment chords if the PHRASE pad is played while
AUTO BASS CHORD accompaniment is playing.

The Multi Pads

Use the [▲/▼] LCD controls to turn the chord match
function for the corresponding pads ON or OFF as required.
NOTES

• Phrases to be played back using the CHORD MATCH function
must be recorded in the key of C major 7.
• The chord match function is only available for pads 1 through 4 (the
PHRASE pads).
• The default chord match settings are:1 and 2 OFF; 3 and 4 ON.

The PERCUSSION Mode
To engage the PERCUSSION mode, press the [PHRASE/CHORD PERCUSSION] button so that the PERCUSSION indicator lights (the
PHRASE/CHORD and PERCUSSION indicators light alternately each
time the button is pressed).
The 8 pads are initially programmed with the following drum and
percussion instruments which can be played via the pads when the PERCUSSION mode is selected:
1. Kick M
2. Snare M
3. C.Hi-Hat
4. O.Hi-Hat

■

PERCUSSION
REC/STOP

PHRASE/CHORD

5. MidTom H
6. Low Tom
7. F Tom L
8. CrashCy2

Assigning Different Instruments To the PERCUSSION Pads .....................................................
Z Press [REC/STOP]

PERCUSSION
REC/STOP

PHRASE/CHORD

Press the [REC/STOP] button so that its indicator
lights (make sure the PERCUSSION mode is selected
first). The PERCUSSION PAD ASSIGN display will appear, listing the percussion instruments currently assigned
to the pads.

X Select a Drum Voice
Use the DRUM KIT LCD [▲/▼] controls to select the
drum voice which includes the percussion instruments you
want to assign.

The Multi Pads

C Assign the Instruments
A new drum/percussion instrument is assigned
to a pad simply by playing the key corresponding to
the desired instrument while holding the pad to
which it is to be assigned. The reverse also works:
press the pad while holding the key. The velocity at
which you play the key (how hard you press the key
= how loud the note sounds) is also recorded to the
specified pad.

PERCUSSION
REC/STOP

PHRASE/CHORD
PLAYING

PHRASE

PHRASE/CHORD

CHORD

MULTI PAD

NOTES

• Percussion voices created using the CUSTOM VOICE
EDIT functions described on page 78 can also be assigned to the percussion pads.

V Press [REC/STOP] To End Assignment
When you’re finished making instrument assignments to the PERCUSSION pads, press the
[REC/STOP] button so that its indicator goes out.

PERCUSSION
REC/STOP

PHRASE/CHORD
PLAYING

PHRASE

NOTES

PHRASE/CHORD

CHORD

MULTI PAD

• Percussion pad data can be saved to and loaded from disk
(page 90), but can not be memorized by the Registration
feature (page 43).

■

Playing the Percussion Pads .........................................................................................................................................
The PERCUSSION pads can be played at any
time — whether an accompaniment is playing or not
— as long as the PERCUSSION mode is selected.
Depending on the assigned instrument, some pads
will play continuously as long as they are held.
NOTES

• The PERCUSSION pad sounds are not affected by the
PSR-4000 PITCH BEND wheel or MODULATION wheel.

PERCUSSION
REC/STOP

PHRASE/CHORD
PLAYING

PHRASE

MULTI PAD

PHRASE/CHORD

CHORD

Registration Memory
The PSR-4000 Registration Memory feature can be used to memorize 128 complete control-panel setups (16 banks, 8 setups each) that
you can recall whenever needed.
NOTES

• Registration data can be saved to and loaded from floppy disk as required (page 90).
• The disk provided with the PSR-4000 contains a number of sample registration settings.

Registering the Panel Settings
Z Set Up the Controls as Required ...............................................................................................................................
Make the desired control settings.
NOTES

• See page 131 for a complete listing of the data stored by
the Registration function.

X Register in Memory ...................................................................................................................................................................
Use the BANK [–] or [+] button
to select the desired memory bank
— the bank number is shown next to
REG. BANK in the upper right corner of the display. Press and hold the
[MEMORY] button, then press one
of the REGISTRATION buttons.
Any data that was previously in the
selected location is erased and replaced by the new settings.

BANK 1~16

–

FREEZE

MEMORY

BANK 1~16

–

REGISTRATION

Registration Memory

Entering a Registration Name
You can enter descriptive names up to 16 characters in length for each registration setup via the NAME
function accessible via the registration EASY SETTING display. The same function is also available via
the FUNCTION display — page 114.

Z Select the NAME Function ................................................................................................................................................
Press the EASY SETTING LCD button that appears when a BANK button or the [MEMORY]
button is pressed before it disappears. When the
easy setting display appears, select the NAME function by pressing the corresponding LCD button.

X Enter a Name ...................................................................................................................................................................................
Use the < > LCD [▲/▼] control to move the
name cursor to the various character positions, then
use the A~Z, a~z, or 0~9… LCD [▲/▼] control to
select the required character for each position. The
A~Z LCD [▲/▼] control selects capital letters, the
a~z LCD [▲/▼] control selects lower-case letters,
and the 0~9… LCD [▲/▼] control selects numbers
and special characters.
NOTES

• It’s a good idea to give your registration setups names that
make them easily identifiable. If you’ve created a registration setup for a song named “MySong”, a good registration
name might be something like “MySong-Reg”.

C Exit When Done .............................................................................................................................................................................
Press either the EXIT LCD button or the panel
[EXIT] button when done.

Registration Memory

Recalling the Registered Panel Settings
Simply select the appropriate bank
using the BANK [–] or [+] button
and press the desired REGISTRATION button at any time to recall
the memorized settings. The memorized settings are actually recalled
only when a REGISTRATION
button is pressed — selecting a different bank does not change the
settings.

FREEZE

MEMORY

BANK 1~16

–

REGISTRATION

The selected bank and registration number appears at the top of the display. The registration name
appears to the right of the bank and number.

If any change is made to a setting memorized by
the REGISTRATION feature, “REGIST EDITED”
appears in place of the bank, number, and name to
indicate that the current panel settings do not exactly
correspond to the selected registration memory.

Registration Memory

The Freeze Function
If you press the [FREEZE] button so that its LED lights, selecting a
different registration setup will not change the settings specified in the
FREEZE GROUP SETTING display accessed either via the registration
EASY SETTING display or the [FUNCTION] button (page 114).

FREEZE

MEMORY

BANK 1~16

–

The Freeze Group Settings
You can specify which settings are affected by the FREEZE function via the FREEZE GROUP SETTING
function accessible via the registration EASY SETTING display. The same function is also available via the
FUNCTION display — page 114.

Z Select the FREEZE GROUP SETTING Function ........................................................................................
Press the EASY SETTING LCD button that appears when a BANK button or the [MEMORY]
button is pressed before it disappears. When the
easy setting display appears, select the FREEZE
GROUP SETTING function by pressing the corresponding LCD button.

X Mark the Settings to be “Frozen” .....
Use the GROUP SELECT LCD [▲/▼] controls
to select a setting you want to freeze or “un-freeze”,
then use the MARK LCD [▲/▼] control to set or
remove the check mark for that setting. Repeat until
all settings are marked or un-marked as required.

Song Playback & Recording
Song Playback
The PSR-4000 SONG PLAY mode allows song data to be played back from a floppy disk. The song file types
which can be played by the PSR-4000 are: songs recorded on the PSR-4000, DOC (Disk Orchestra Collection),
Disklavier and GM song (SMF format). Refer to the DOC or SMF disk manuals as necessary.

Z Insert a Song Disk ......................................................................................................................................................................
Insert a song disk into the PSR-4000 disk drive
— a disk containing songs you have recorded on the
PSR-4000 yourself, a Yamaha DOC (Disk Orchestra
Collection), a Yamaha Disklavier disk, or a GM
song disk. The SONG PLAY mode will be automatically engaged if a DOC, Disklavier or GM song disk
is inserted (and an accompaniment is not playing).
Otherwise engage the SONG PLAY mode as described in the following step.

X Engage the Song Play Mode ...........................................................................................................................................
Press the [SONG PLAY] button to engage the
SONG PLAY mode. The SONG PLAY display will
appear.

SONG
PLAY

CUSTOM
VOICE EDIT

SONG
CUSTOM
RECORD ACCOMP. REC

FUNCTION

DISK

Song Playback & Recording
C Select a Play Mode ....................................................................................................................................................................
Use the MODE LCD [▲/▼] controls to select a
play mode:
SINGLE

Plays the single song selected via
the SONG SELECT controls.

ALL

Plays all songs in the song list in
order.

CHAIN

Plays the songs specified in the
CHAIN LIST in the specified order.
Set this via the MAKE CHAIN button.

RANDOM

Plays all songs in the song list in
random order.

Also, use the REPEAT LCD [▲/▼] control to
turn the repeat mode ON or OFF as required. When
ON, playback will repeat continuously until stopped.

V Start/Stop Playback ..................................................................................................................................................................
Press the START LCD button to start playback.
Playback will stop automatically when the specified
song(s) have been played all the way through (unless the repeat mode is ON). You can also stop
playback at any time by pressing the STOP [■] LCD
button.

■

Pause, Fast Forward & Reverse ..................................................................................................................................
When you press the STOP [■] LCD button,
playback stops and the song position returns to the
beginning of the song. The PAUSE LCD button,
however, lets you pause playback and then start
again from the same point in the song. Playback can
be restarted either by pressing the PAUSE LCD
button again or by pressing the START LCD button.
While the PAUSE mode is engaged the F.F.
[f] (Fast Forward) and REW [r] (Reverse) LCD
buttons rapidly move the playback location forward
and backward in 1-measure steps, respectively. The
[r] and [f] buttons can be used both during
playback and while playback is paused. The REW
[r] LCD button will not appear and reverse operation will not be possible when a GM song disk (SMF
Format 1) is being played.

Song Playback & Recording

Chain Playback
Chain playback allows any number of songs to be grouped together in any order for playback.
To program a chain:

Z Press the MAKE CHAIN LCD Button .....................................................................................................................
The MAKE CHAIN LCD button will take you to
the chain programming display.

X Select and Insert the Required Songs .................................................................................................................
Use the SONG LCD [▲/▼] controls to select a
song, use the CHAIN LIST LCD [▲/▼] controls to
select a position in the chain if the chain contains
more than one song, and finally press the INS LCD
button to insert the song at the current position.
Repeat this process to insert the required songs at
the required locations.

C Delete Songs As Required ................................................................................................................................................
To delete a song from the chain list simply use
the CHAIN LIST LCD [▲/▼] controls to select the
song to be deleted, then press the DEL LCD button.

Song Playback & Recording
V Save the Chain List, If Necessary .............................................................................................................................
The completed chain list can be saved to disk by
pressing the LIST SAVE LCD button. A confirmation display will appear (“OK to save chain data?”):
press YES to save the list or NO to cancel.
NOTES

• Chain list data cannot be saved to a DOC or Disklavier
disk.

B Return to the Song Select Display ...........................................................................................................................
Press the SONG SEL. LCD button to return to the
SONG SELECT display.

Volume & Mute/Solo Settings
The volume, mute, and solo parameters for song
playback are available via the VOLUME/MUTE
display which can be accessed by pressing the [ ]
LCD button to the right of the display. Press the
VOLUME or MUTE LCD button to switch to the
corresponding display.

Song Playback & Recording

The number of volume parameters in the TRACK
VOLUME display will depend on the type of song
being played. If an original song recorded on the
PSR-4000 using the QUICK RECORD mode is
being played, two volume parameters will be available: MANUAL and ACCOMP. If an original song
recorded on the PSR-4000 using the MULTITRACK
RECORD mode or a GM song is being played,
individual parameters for all 16 tracks will be available: TR1 through TR16. Use the LCD [▲/▼]
controls to set the volume of the corresponding
tracks. If a Yamaha DOC song is being played use
the RHY, BASS, ORCH, LEFT, and RIGHT LCD
[▲/▼] controls to set the volume of the corresponding tracks (see the DOC or Disklavier software
manual for more details). If a Disklavier song is
being played use the ORCH, LEFT, and RIGHT
LCD [▲/▼] controls to set the volume of the corresponding tracks.
The LCD [▲/▼] controls in the TRACK MUTE
display allow PLAY, MUTE, or SOLO to be selected
for each track group. Muted tracks do not play. If a
track is set to SOLO only that track will play.
The track indicators above the volume or mute/
solo parameters indicate which tracks contain data
and which are muted. Tracks which do not contain
data are indicated by a dotted circle outline while
tracks which contain data have a solid outline. Playenabled tracks are indicated by a filled circle while
tracks that are muted are indicated by an outline
only.

QUICK RECORD song

MULTITRACK RECORD song

DOC song

NOTES

• When GM song is played all tracks appear on the display
as if they contain data, even if they don’t.

GM song

Song Playback & Recording

Song Recording
The PSR-4000 SONG RECORD mode allows anything you play to be recorded to floppy disk. A QUICK
RECORD mode provides an easy way to record a melody with accompaniment, while a MULTITRACK record mode
allows independent recording on up to 16 tracks. There’s also a CHORD SEQUENCE record mode available via the
QUICK record mode.

Z Insert a Recordable Disk .....................................................................................................................................................
Insert a properly formatted disk in the PSR-4000
disk drive.

X Engage the Song Record Mode ...................................................................................................................................
Press the [SONG RECORD] button to engage
the SONG RECORD mode. The SONG RECORD
display will appear.
NOTES

• If an unformatted disk or a disk which has not been
formatted for use with the PSR-4000 is inserted, the
“Wrong disk format! Format disk?” confirmation message
will appear when the SONG RECORD mode is selected.
Press YES to format the disk or NO to cancel.
• If a GM disk is in the drive when the SONG RECORD
mode is engaged, the “Not a user disk! Recording to this
disk will convert it to a user disk. OK to record?” message
will appear on the display. Press YES to enter the record
mode or NO to cancel.
• If a DOC or Disklavier disk is in the drive when the SONG
RECORD mode is engaged the “Write protected!” message will appear and it will not be possible to enter the
record mode.

C Select a Song .........................................................
Use the SONG LCD [▲/▼] controls to select
either an existing song for additional recording or a
new song (“ ” on the SONG LIST) to record a new
song.

SONG
PLAY

CUSTOM
VOICE EDIT

SONG
CUSTOM
RECORD ACCOMP. REC

FUNCTION

DISK

Song Playback & Recording
V Enter a Song Name, If Necessary .............................................................................................................................
You can enter an original name for the song at
this point. Song names can be up to 12 characters
long. Use the < > LCD [▲/▼] control to move the
name cursor to the various character positions, then
use the A~Z, a~z, or 0~9… LCD [▲/▼] control
to select the required character for each position.
The A~Z LCD [▲/▼] control selects capital letters,
the a~z control selects lower-case letters, and the
0~9… LCD [▲/▼] control selects numbers and
special characters.

B Select a Record Mode ............................................................................................................................................................
Press the QUICK RECORD or MULTI TRACK
LCD button to select the corresponding record mode.

Song Playback & Recording

Quick Record
The QUICK RECORD mode, as its name suggests, makes track selection and recording easy by grouping the
accompaniment and manual tracks.

Z Set the Track Modes .................................................................................................................................................................
Use the MANUAL and ACCOMP. LCD [▲/▼]
controls to the select the REC mode for the track(s)
to be recorded, the PLAY mode for the tracks to be
played while recording, or the MUTE mode for
tracks neither to be played or recorded. The PLAY
mode can only be selected for tracks which contain
data.
NOTES

• Note that the SYNCHRO START mode is automatically
engaged when the QUICK RECORD mode is selected, so
be careful not to play the keyboard before you’re ready to
actually start recording, or recording will begin automatically. SYNCHRO START can be disengaged by pressing
the [SYNCHRO START] button.

X Set Up For the Recording ..................................................................................................................................................
Select the required voice(s), select a style, turn
AUTO BASS CHORD on if required (see “NOTES”
below). Set up all parameters as desired for recording. The voices, multi-pad notes, harmony notes,
and accompaniment parts are recorded on the various tracks as listed below.
MANUAL
VOICE
LEAD voice
RIGHT 1 voice
RIGHT 2 voice
LEFT voice
MULTI PAD
HARMONY

ACCOMPANIMENT
TRACK
1
2
3
4
5
6…8

PART
RHYTHM 1
RHYTHM 2
BASS
CHORD 1
CHORD 2
PAD
PHRASE 1
PHRASE 2

TRACK
9
10
11
12
13
14
15
16

NOTES

• If you turn the panel [AUTO BASS CHORD] button on, the
ACCOMP. tracks will automatically be set to the REC
mode.
• If the REC mode is engaged for the ACCOMP. tracks the
panel [AUTO BASS CHORD] button will be turned on
automatically.

Song Playback & Recording
C Turn the Metronome On If Required .......................................................................................................................
Use the METRONOME LCD [▲/▼] controls to
turn the metronome ON if you want to record while
monitoring the metronome sound (the metronome
sound is not recorded).

V Start Recording .............................................................................................................................................................................
If the SYNCHRO START mode is engaged (it is
engaged automatically when the QUICK RECORD
mode is selected) you can start recording by simply
playing on the keyboard. Otherwise use the START
LCD button or the panel [START] button.
NOTES

• Any previous data in a track will be erased when that track
is recorded.
• When the record mode is engaged and accompaniment is
stopped, prior to actually starting recording, the amount of
available disk space will appear in the upper right corner
of the display in approximate kilobytes. The measure
number is displayed in this location when recording is
started.

B Stop Recording .............................................................................................................................................................................
Stop recording by pressing the STOP LCD button, the panel [STOP] button or the [ENDING]
button. When recording is stopped the “Saving to
disk” message may appear on the display while the
recorded data is being saved to the disk.

Song Playback & Recording
■

THE TRACK INDICATORS ...................................................................................................................................................
The track indicators above the track mode selectors indicate which tracks contain data and which
are muted. Tracks which do not contain data are
indicated by a dotted circle outline while tracks
which contain data have a solid outline. Play-enabled tracks are indicated by a filled circle while
tracks that are muted are indicated by an outline
only.

Play-enabled

Muted

No data

■

Record-enabled

TRACK DELETE ............................................................................................................................................................................
When the DEL LCD button is pressed DELETE
will appear for tracks which contain data. Select
DELETE via the MANUAL or ACCOMP. track
LCD [▲/▼] controls while holding the DEL button
to delete all data in the corresponding tracks. The
data is actually deleted when the DEL LCD button is
released. When the DEL LCD button is pressed,
tracks set to REC will automatically be switched to
PLAY or MUTE.

■

PLAYBACK .........................................................................................................................................................................................
Recorded tracks are automatically set to the
PLAY mode when recording is stopped, so you can
simply press the START LCD button or the [START]
panel button to hear what you’ve recorded immediately after recording. All other playback functions
are the same as described on the “Song Playback”
section (page 47).

■

EXITING .................................................................................................................................................................................................
Press the [SONG RECORD] or [EXIT] button
to exit from the QUICK RECORD mode and return
to the normal play mode.

SONG
PLAY

CUSTOM
VOICE EDIT

SONG
CUSTOM
RECORD ACCOMP. REC

FUNCTION

EXIT
DISK

Song Playback & Recording

Chord Step Recording
The CHORD STEP recording feature makes it possible to record accompaniment chord changes one at a time
with precise timing. Since the changes don’t have to entered in real time, it is easy to create even complex
accompaniments before recording the melody.
Select the CHORD STEP display via the [ ] or [ ] LCD button to the right of the display.

Z Select an Entry Point ...............................................................................................................................................................
Use the < >CURSOR< > LCD [▲/▼] controls
to position the cursor at the measure and beat at
which you want to enter a chord or other accompaniment event. The large < > controls move the
cursor in 1-measure steps while the small < >
controls position the cursor in the smallest increment allowed for the current style. Measure numbers appear above each measure division on the
“data line”, and the smaller division represent the
smallest increment available for the current style.
The measure numbers will scroll accordingly when
the cursor is moved past the last or first measure on
the display (but not backwards past measure 1).

X Specify a Chord, Volume Change, or Other Event ..................................................................................
To specify a chord change use the ROOT and
TYPE LCD [▲/▼] controls to specify the chord. It
is also possible to enter chords directly via the
AUTO BASS CHORD section of the keyboard.
To specify a volume change use the VOL. LCD
[▲/▼] control to specify the new volume level.
Other events which can be entered via the panel
controls are: STYLE changes, [MAIN A], [MAIN
B], [INTRO A/FILL to A], [INTRO B/FILL to B],
[ENDING], and TEMPO changes. STYLE change,
[MAIN A], [MAIN B], and [ENDING] events can
only be entered at the top of each measure. The
edited event appears in inverse text.

Song Playback & Recording
C Enter the Specified Event(s) ...........................................................................................................................................
Once the event or events to be entered have been
specified as described in the preceding step, press
the SET LCD button to actually enter the event at the
current cursor position. A dot will appear on the
CHORD STEP data line and the cursor will advance
to the top of the next measure.

V Repeat Until Done .............................................
Repeat steps 1 through 3, above, until the required number of chord changes and other accompaniment events have been entered. The end of the
sequence is automatically set at the end of the last
measure containing data, the insert point of an END
event (available at the bottom of the TYPE list).

■

DELETING EVENTS ..................................................................................................................................................................
When the cursor is located at any previouslyentered dot on the CHORD STEP data line, the type
of event(s) recorded in that location are indicated by
triangular markers (s) to the left of the corresponding event names in the event window. When only
one type of event has been entered at the cursor
location an eraser icon appears to the right of the
corresponding event in the event window, and that
event can be erased simply by pressing the DEL
LCD button. When more that one type of event has
been entered at the cursor location the SELECT
LCD [▲/▼] control can be used to place the eraser
icon next to any of these events, and the specified
event can be erased by pressing the DEL LCD
button. Events at the top of a measure can be changed
but not deleted.

Song Playback & Recording

Quick Record Mode Edit Functions
The QUICK RECORD mode EDIT display includes only one function: SONG DELETE.
Select the EDIT display via the [ ] LCD button to the right of the display.

■

SONG DELETE ...............................................................................................................................................................................
This function deletes the specified song file from the disk.
NOTES

• The song currently being recorded cannot be deleted.
• The amount of remaining disk space is displayed in the
upper right corner of the display in approximate kilobytes
while recording or playback is stopped.

Z Select a Song
Use the SONG LCD [▲/▼] controls to select the
song to be deleted.

X Delete the Song
Press the EXECUTE LCD button. The “Ready to
Delete ********. OK to delete?” confirmation
message will appear (“********” is the song name).
Press YES to delete the song or NO to cancel.

Song Playback & Recording

Multitrack Record
The MULTITRACK record mode allows independent recording and playback on any of 16 tracks, so even complex
songs can be built up track by track.

Z Set the Track Modes .................................................................................................................................................................
Use the TR1 through TR16 LCD [▲/▼] controls to the select the REC mode for the track(s) to be
recorded, the PLAY mode for the tracks to be played
while recording, or the MUTE mode for tracks
neither to be played or recorded. The PLAY mode
can only be selected for tracks which contain data.
The TR1-8 or TR9-16 LCD button selects track
groups 1 through 8 and 9 through 16, respectively.

X Change the Track Parts, If Required .......................................................................................................................
The default part for each track is displayed above
the REC setting. The parts can be changed as required by selecting them via the ▲ end of the
corresponding LCD [▲/▼] controls. When the part
has been changed, move back down to the REC
setting.

Song Playback & Recording
C Set Up For the Recording ..................................................................................................................................................
Select the required voice(s), select a style, turn
AUTO BASS CHORD on if required. Set up all
parameters as desired for recording.
NOTES

• If you turn the panel [AUTO BASS CHORD] button on, the
accompaniment tracks will automatically be set to the
REC mode.
• If the panel [AUTO BASS CHORD] button is turned off the
accompaniment track REC modes will be disengaged.
• If no AUTO BASS CHORD track is set to the REC mode,
the [AUTO BASS CHORD] button will automatically be
turned off.
• If the REC mode is engaged for any of the accompaniment
tracks the panel [AUTO BASS CHORD] button will be
turned on automatically.

V Start Recording .............................................................................................................................................................................
Engage the SYNCHRO START mode if you
want to start recording automatically as soon as you
start playing on the keyboard. Otherwise use the
START LCD button or the panel [START] button.
NOTES

Song Playback & Recording
■

No data
Record-enabled

■

Muted
Play-enabled

TRACK DELETE ............................................................................................................................................................................
When the DEL LCD button is pressed DELETE
will appear for tracks which contain data. Select
DELETE via the TR1 through TR16 LCD [▲/▼]
controls while holding the DEL button to delete all
data in the corresponding tracks. The data is actually deleted when the DEL LCD button is released.
When the DEL LCD button is pressed, tracks set to
REC will automatically be switched to PLAY or
MUTE.

■

RECORDING & EFFECTS ...................................................................................................................................................
The reverb, chorus, and DSP effects are recorded
as follows:

REVERB

The last reverb type selected during recording takes priority. No effect type is recorded if the [REVERB] button is off during recording.

CHORUS

The chorus type is only recorded when the accompaniment or rhythm tracks are recorded. The
chorus type is recorded even if the [CHORUS] button is off during recording. The chorus type is
selected automatically according to the selected style.

DSP EFFECT

If the [DSP EFFECT] button is on during recording, the current DSP effect will be recorded only for
the tracks actually being recorded. If the [DSP EFFECT] button is off during recording or only the
accompaniment tracks are set to the REC mode, no change occurs. If the [DSP EFFECT] button is
turned on during manual track recording, however, only tracks set to the REC mode are effected.

Song Playback & Recording
■

■

EXITING .................................................................................................................................................................................................
Press the [SONG RECORD] or [EXIT] button
to exit from the MULTITRACK RECORD mode
and return to the normal play mode.

SONG
PLAY

CUSTOM
VOICE EDIT

SONG
CUSTOM
RECORD ACCOMP. REC

FUNCTION

EXIT
DISK

Punch-In Recording
PUNCH IN recording allows only a section of a recorded track to be re-recorded without having to redo the entire
track.
Select the PUNCH IN display via the [ ] or [ ] LCD button to the right of the display.
NOTES

• If you require the metronome sound for punch-in recording turn the METRONOME parameter ON in the PUNCH
IN display. The metronome settings are available in the
MULTI REC mode.

Z Select a Track ...................................................................................................................................................................................
Use the TRACK LCD [▲/▼] controls to select a
track for PUNCH IN recording: LEAD, RIGHT1,
RIGHT2, or LEFT. Only tracks which contain data
can be selected.

Song Playback & Recording
X Select a Start Trigger Type .................................................................................................................................................
Use the TRIGGER LCD [▲/▼] controls to select the FIRST KEY or START SW start trigger.
When FIRST KEY is selected recording will begin
when the first key is played on the keyboard. When
START SW is selected recording will begin when
the START LCD button or panel [START/STOP]
button is pressed. If a footswitch has been assigned
to the PUNCH IN/OUT function via the F3 CONTROLLER: FOOT CONTROLLER display (page
104), FOOT SW can also be selected via the TRIGGER LCD [▲/▼] controls.

C Turn the Metronome On If Required .......................................................................................................................
Use the METRONOME LCD [▲/▼] control to
turn the metronome ON if you want to record while
monitoring the metronome sound (the metronome
sound is not recorded).

V Locate the Punch In Point ........................
While the PLAY mode is selected play the song
and pause playback a few measures before the
punch-in point so you have a good “lead in” prior to
actually starting recording.

B Engage the Record Mode ...................................................................................................................................................
Use the MODE LCD [▲/▼] controls to select
the REC mode.

Song Playback & Recording
N Start Playback .................................................................................................................................................................................
Press the START LCD button or panel [START/
STOP] button to start playback from the current
PAUSE location.

M Start Recording at the Punch-in Point .................................................................................................................
Start recording at the punch-in point by either
pressing a START button, playing on the keyboard,
or pressing the footswitch, according to the start
trigger type selected in step 2, above.

< Stop Recording .............................................................................................................................................................................
Stop recording at the punch-out point by pressing the PUNCH OUT LCD button, the panel [START/
STOP] button, or the footswitch. If recording is
stopped via the panel [START/STOP] button, all
data following the punch-out point will be deleted.
If recording is stopped by using the PUNCH OUT
LCD button or footswitch, data following the punchout point will be left intact.

Song Playback & Recording

Track Volume Control
The MULTITRACK RECORD VOLUME display provides independent volume parameters for
each of the 16 tracks.
Select the VOLUME display via the [ ] or [ ]
LCD button to the right of the display, and use the
TR1 through TR16 LCD [▲/▼] controls to set the
volume of the corresponding tracks. The TR1-8 or
TR9-16 LCD button selects track groups 1 through
8 and 9 through 16, respectively. Press the EXECUTE LCD button to save the edited volume data
to disk.

Multitrack record Mode Edit Functions
The MULTITRACK RECORD mode EDIT display includes four functions: QUANTIZE, TRACK MIX,
INITIAL EDIT, and SONG DELETE.
Select the EDIT display via the [ ] LCD button to the right of the display, then use the s and t LCD buttons
to the left of the display to select the desired function.

■

QUANTIZE ...........................................................................................................................................................................................
The QUANTIZE function aligns recorded notes
in a specified track to the specified beats to “tighten
up” the timing of a performance.

One measure of 8th notes before quantization

After quantization

The Quantize sizes are:
1/4 note

1/16 note

1/4 note triplet

1/16 note triplet

1/8 note

1/32 note

1/8 note triplet

Z Select a Track
Use the TRACK LCD [▲/▼] controls to select
the track to be quantized, and the SIZE LCD [▲/▼]
controls to select the beats to which the notes will be
aligned. Only tracks which contain data will be
available for quantization.

Song Playback & Recording

X Quantize the Track
Press the EXECUTE button. “Executing” will
appear on the display while the data is being quantized.
After quantization the EXECUTE button changes to
an UNDO button which can be used to undo the
quantize operation if the results are not satisfactory.

■

TRACK COPY/MIX ......................................................................................................................................................................
This function allows data to be copied from one track to another, or data from two tracks can be mixed and the
results placed in a different track.
● Copy

● Mix

Source track 1

Data

Data
Copy to Destination track

Source track 2

Data

Data
Destination track

Z Select the Source and Destination
Tracks
Use the SOURCE1 and SOURCE2 LCD [▲/▼]
controls to specify the tracks to be mixed, and the
DESTINATION LCD [▲/▼] controls to select the
track into which the results will be placed. To simply
copy from the SOURCE1 track to the DESTINATION track select COPY via the SOURCE2 LCD
[▲/▼] controls.

X Copy/Mix the Data
Press the EXECUTE button. “Executing” will
appear on the display while the data is being copied.
After execution the EXECUTE button changes to an
UNDO button which can be used to undo the copy/
mix operation if the results are not satisfactory.

Song Playback & Recording
■

INITIAL EDIT .....................................................................................................................................................................................
Allows the initial REVERB DEPTH, CHORUS DEPTH, and DSP EFFECT depth settings for each track to be
edited as required.

Z Select a Track & Set the Depth Parameters
Use the TRACK LCD [▲/▼] control to select a
track, and the REVERB, CHORUS, and DSP EFFECT LCD [▲/▼] controls to set the corresponding
depth parameters as required. Only tracks which
contain data can be selected for editing.

X Enter the Edited Data
Press the EXECUTE button. “Executing” will
appear on the display while the data is being updated. After execution the EXECUTE button changes
to an UNDO button which can be used to undo the
initial edit operation if the results are not satisfactory.

■

Z Select a Song
Use the SONG LCD [▲/▼] controls to select the
song to be deleted.

Custom Accompaniment
The CUSTOM ACCOMPANIMENT RECORD mode allows you to
create original accompaniment styles that can be later recalled and
played at any time, just like the presets. Up to 12 custom accompaniment styles can be maintained in internal memory at the same time,
and any number can be saved to disk for later reloading and use. 5
sections can be created for each custom style: MAIN A, MAIN B,
INTRO, FILL IN, and ENDING.
The basic custom style recording procedure is outlined below.

Z Engage the CUSTOM ACCOMP. RECORD Mode ......................................................................................
Press the [CUSTOM ACCOMP. RECORD]
button. The current [CUSTOM] style will begin
playing in the key of C major 7 and the REC mode
for the RHY1 track will be automatically engaged.

SONG
PLAY

CUSTOM
VOICE EDIT

SONG
CUSTOM
RECORD ACCOMP. REC

FUNCTION

DISK

X Select a Style ..........................................................
Select one of the [CUSTOM] styles or a preset
style that is close to the style you want to create.
Style selection is carried out in the normal way
(page 22).
NOTES

• If you select a different style after any data has been edited
a confirmation display will appear. This is necessary
because loading a new style will erase any edits you have
already made.

C Select the Section You Want to Record ...............................................................................................................
After making sure that the BASIC page is selected (use the [ ] LCD button to the right of the
display if necessary), press the SETTING LCD
button if it is showing to access the NAME, SECTION, and COPY parameters. Use the SECTION
LCD [▲/▼] controls to select the section you want
to program first: MAIN A, MAIN B, INTRO, FILL
IN, or ENDING. The MAIN A section is initially
selected.

Custom Accompaniment
V Copy the Data For the A or B Variation ...............................................................................................................
The COPY parameter makes it possible to copy
the A or B variation to the selected section, depending on the variation you want to program. The
possibilities are listed below:
SECTION

COPY SOURCE

MAIN A or B

MAIN A, MAIN B

INTRO

INTRO A, INTRO B

FILL IN

FILL AA, FILL AB, FILL BB, FILL BA

ENDING

ENDING A, ENDING B

Use the SOURCE LCD [▲/▼] controls to select
the section to be copied to the current section. Press
the EXECUTE button, then press YES to copy the
data when the confirmation display appears (or NO
to cancel).

B Enter a Style Name, If Necessary ..............................................................................................................................
You can enter an original name for the custom
accompaniment style at this point. Style names can
be up to 12 characters long. Use the < > LCD [▲/
▼] control to move the name cursor to the various
character positions, then use the A~Z, a~z or
0~9… LCD [▲/▼] control to select the required
character for each position. The A~Z LCD [▲/▼]
control selects capital letters, the a~z LCD [▲/▼]
control selects lower-case letters, and the 0~9…
LCD [▲/▼] control selects numbers and special
characters.

N Go to the PART RECORD Display and Set Up the Tracks ...............................................................
Press the PART RECORD LCD button to go to
the PART RECORD display and use the LCD [▲/
▼] controls to set the REC mode for the part you
want to record. Other parts can be play-enabled or
muted as required. Parts which contain no data are
automatically set to MUTE.

Custom Accompaniment

Parts can be cleared completely before recording
if you want to record “from scratch”, or change the
number of measures in the section, as described
below. When the DEL LCD button is pressed DELETE will appear for tracks which contain data.
Select DELETE via the track LCD [▲/▼] controls
while holding the DEL button to delete all data in the
corresponding tracks. The data is actually deleted
when the DEL button is released.
The entire custom accompaniment style can be
cleared (in order to change the time signature, for
example) by using the CLEAR CUSTOM STYLE
function described on page 77.

M Change the Time Signature & Number Of Measures, If Required ..........................................
If you want to create a style in a different time
signature than the current style, or change the number
of measures in the selected section, use the ▼ LCD
button to the left of the display to select the MEASURE and BEAT parameters.
Use the BEAT LCD [▲/▼] controls to select a
different time signature: 2/4, 3/4, 4/4, or 5/4. Please
note that the time signature can only be changed if
all sections of the current custom style have been
cleared. If any data remains in any section “All
sections must be clear to set beat” will appear in the
BEAT parameter position (use the CLEAR CUSTOM STYLE function described on page 77 to clear
all sections of the current custom style).
Use the MEASURE LCD [▲/▼] controls to
select a different number of measures for the selected section. Please note that the number of measures can only be changed if all parts of the current
section have been cleared. If any data remains in any
part “All parts must be clear to set measures” will
appear in the MEASURE parameter position (the
parts can be cleared as described in the previous
step) Once the parts have been cleared you can
select a new number of measures as required: 1
through 8.
Once the BEAT and/or MEASURE parameters
have been set as required, press the PART RECORD
button to the left of the display to go back to the
PART RECORD display.

Custom Accompaniment
< Record the Selected part ....................................................................................................................................................
You can now add new notes to the selected part
by playing the keyboard at the appropriate timing.
All parts must be entered in the key of C major 7. If
both the RHY1 and RHY2 parts are cleared the
metronome will sound to provide a timing guide (the
metronome sound is not recorded). A single drum
instrument can be cleared from the RHY1 and/or
RHY2 track by pressing the key corresponding to
the instrument to be cleared while holding the RHY
DIRECT CANCEL LCD button.
NOTES

• Key On/Off ,Voice , Volume , Pitch Bend and Modulation
data can be recorded.
• When the RHY1 or RHY2 part is selected the keyboard
percussion mode is automatically engaged. In this case
the drum kit voice can be changed via the RIGHT 1 voice
selectors. All voices in the [CUSTOM] group can be
selected — but only drum kit voices will sound.
• If a preset style or an SFF style loaded from disk is being
used unedited, or a part contains no data, REC will appear
in gray for all except the RHYTHM parts and the REC
mode cannot be selected. New data can be recorded for
such parts by first deleting all data from the part.
• Playback can be started and stopped via the [START/
STOP] button as required while in the CUSTOM ACCOMP.
RECORD mode — data cannot be recorded while playback is stopped. It is a good idea, however, to use
[SYNCHRO START] if you want to record from the top of
the first measure.

• The volume of the voice being edited can be adjusted by
pressing the [MIXER] button and using the R1 [s/t] LCD
controls.
• A “KEY OFF” event will automatically be recorded after the last
note in the accompaniment.
• If a custom accompaniment which includes an empty section is
saved to disk, the empty section will be replaced by a suitable
section when the accompaniment is later loaded and played.

> Repeat Until All Parts Have Been Recorded ..................................................................................................
Continue selecting the REC mode for the various
tracks and recording them as required until all parts
have been recorded.

? Set the Part Volume Levels ...............................................................................................................................................
Use the ▼ LCD button to the left of the display
to select the VOLUME parameters. Then use the
VOLUME OFFSET LCD [▲/▼] controls to adjust
the volume of each part to create the best overall
balance. Since these are “offset” parameters, both
“+” and “–” settings are possible to increase or
decrease the volume from the preset level, respectively. These settings apply to the corresponding
parts in all sections of the accompaniment.

Custom Accompaniment
[ Go On to EFFECTS, EDIT, and STORE ................................................................................................................
You can now stop the accompaniment by pressing the [START/STOP] button (or leave it running,
as required), and go on to the EFFECTS and EDIT
functions described below. When your custom accompaniment is complete, be sure to use the STORE
function, also described below, to store the style to
one of the CUSTOM memory locations.

Exit When Done .............................................................................................................................................................................
When your custom accompaniment is complete,
press the [CUSTOM ACCOMP. REC] or [EXIT]
button to exit from the CUSTOM ACCOMPANIMENT RECORD mode.

SONG
PLAY

CUSTOM
VOICE EDIT

SONG
CUSTOM
RECORD ACCOMP. REC

FUNCTION

EXIT
DISK

Effects
Select the EFFECTS display via the [ ] or [ ] LCD button to the right of the display. If not already selected,
press the SETTING LCD button to access the REVERB DEPTH, CHORUS TYPE/DEPTH, and PAN parameters for
the current section.

■

REVERB DEPTH ...........................................................................................................................................................................
Use the ▲ and ▼ buttons to the left of the display
to select the REVERB DEPTH parameters, then use
the RHY1, RHY2, BASS, CHD1, CHD2, PAD,
PHR1, and PHR2 LCD [▲/▼] controls to set the
reverb depth for the corresponding parts.

Custom Accompaniment
■

CHORUS TYPE & DEPTH ....................................................................................................................................................
Use the ▲ and ▼ buttons to the left of the display
to select the CHORUS TYPE/DEPTH parameters.
To select a chorus type use the TYPE LCD button
to select the CHORUS TYPE display. Use the LCD
[▲/▼] controls to select the desired chorus type.
To set the chorus depth parameters use the DEPTH
LCD button to select the CHORUS DEPTH display
(if it isn’t already selected). Use the RHY1, RHY2,
BASS, CHD1, CHD2, PAD, PHR1, and PHR2
LCD [▲/▼] controls to set the chorus depth for the
corresponding parts.

■

PAN .............................................................................................................................................................................................................
Use the ▲ and ▼ buttons to the left of the display
to select the PAN parameters. Use the RHY1, RHY2,
BASS, CHD1, CHD2, PAD, PHR1, and PHR2
LCD [▲/▼] controls to set the pan position for the
corresponding parts.
NOTES

• The REVERB, CHORUS, and PAN parameters can not
be edited for parts which contain no data.

Custom Accompaniment

Edit
Select the EDIT display via the [ ] or [ ] LCD button to the right of the display. If not already selected, press
the SETTING LCD button to access the QUANTIZE, COPY, and REMOVE EVENT parameters. Use the ▲ and ▼
LCD buttons to the left of the display to select the desired function.

■

QUANTIZE ...........................................................................................................................................................................................
The QUANTIZE function aligns recorded notes
in a specified part to the specified beats to “tighten
up” the timing of a performance.

The Quantize sizes are:
1/4 note

1/16 note

1/4 note triplet

1/16 note triplet

Z Select a Part

1/8 note

1/32 note

Use the PART LCD [▲/▼] controls to select the
part to be quantized, and the SIZE LCD [▲/▼]
controls to select the beats to which the notes will be
aligned.
The part name for parts which are being used
unedited from a preset style will appear in small
letters. “*” will appear for parts which contain no
data. Neither can be selected for quantization.

1/8 note triplet

X Quantize the Part
Press the EXECUTE button. The “Completed”
display will appear briefly when the quantize operation has finished. After quantization the EXECUTE
button changes to an UNDO button which can be
used to undo the quantize operation if the results are
not satisfactory.

■

COPY ........................................................................................................................................................................................................
This function allows data to be copied from one measure or group of measures to another location within the same
part.

Z Select a Part
Use the PART LCD [▲/▼] controls to select the
part to be edited.
The part name for parts which are being used
unedited from a preset style will appear in small
letters. “*” will appear for parts which contain no
data. Neither can be selected for editing.

Custom Accompaniment

X Select the Top, Last, and Destination
Measures
Use the TOP and LAST LCD [▲/▼] controls to
specify the first and last measures in the region to be
copied. Use the DEST LCD [▲/▼] control to specify
the top of the measure to which the data is to be
copied.

C Copy the Data
Press the EXECUTE button. The “Completed”
display will appear briefly when the copy operation
has finished. After execution the EXECUTE button
changes to an UNDO button which can be used to
undo the copy operation if the results are not satisfactory.

■

REMOVE EVENT ...........................................................................................................................................................................
This function can be used to remove all occurrences of a specified type of event — VOLUME, PITCH BEND,
or MODULATION — from a specified part.

Z Select a Part
Use the PART LCD [▲/▼] controls to select the
part from which a type of event is to be removed.
The part name for parts which are being used
unedited from a preset style will appear in small
letters. “*” will appear for parts which contain no
data. Neither can be selected for editing.

X Select an Event Type
Use the EVENT LCD [▲/▼] controls to select
the type of event to be removed.
NOTES

• MODULATION events cannot be removed from the RHY1
and RHY2 parts.

C Remove the Specified Events
Press the EXECUTE button. “Completed” will
appear on the display briefly when the data has been
removed. After execution the EXECUTE button
changes to an UNDO button which can be used to
undo the copy operation if the results are not satisfactory.

Custom Accompaniment

Store/Clear
Select the STORE display via the [ ] LCD button to the right of the display. If not already selected, press
the SETTING LCD button to access the STORE and CLEAR CUSTOM STYLE parameters. Use the ▲ and ▼ LCD
buttons to the left of the display to select the desired function.

■

STORE .....................................................................................................................................................................................................
Stores the recorded custom accompaniment data for use with the PSR-4000 accompaniment feature. When this
function is selected the size of the current style and the remaining memory capacity available for style storage are
displayed to the right of the display. The names and sizes of all other styles currently in memory are shown in the
lower section of the display.

Z Select a Custom Style Number
Use the STORE LCD [▲/▼] controls to select
the custom style number to which you want to store
the newly created custom style.

X Store the Custom Style
Press the EXECUTE button, then press YES to
store the style when the confirmation display appears (or NO to cancel).

■

CLEAR CUSTOM STYLE .....................................................................................................................................................
Clears unwanted custom styles from memory, making more memory available for custom style storage.

Z Select a Custom Style Number
Use the CLEAR LCD [▲/▼] controls to select
the custom style you want to clear.

X Clear the Custom Style
Press the EXECUTE button, then press YES to
clear the style when the confirmation display appears (or NO to cancel).
NOTES

• If you change styles or exit from the CUSTOM ACCOMP.
REC mode before storing an edited style, a store confirmation display will appear. Press YES to store the data,
NO to exit without storing, or CANCEL to continue editing.
The YES button returns you to the STORE/CLEAR display.

Custom Voice Edit
This mode makes it possible to create new voices by editing some
parameters of the preset voices. A simple EASY EDIT mode and fullparameter FULL EDIT mode are available. Both modes can be used to
customize voice data loaded from disk. Up to 32 custom voices can be
retained in memory and selected via the RIGHT 1, RIGHT 2, LEFT, and
LEAD voice [CUSTOM] buttons.

Engaging the Easy/Full Edit Mode
Z Engage the CUSTOM VOICE EDIT Mode ............................................................................................................
Press the [CUSTOM VOICE EDIT] button to
engage the CUSTOM VOICE EDIT mode. The
CUSTOM VOICE EDIT display will appear.

SONG
PLAY

CUSTOM
VOICE EDIT

SONG
CUSTOM
RECORD ACCOMP. REC

FUNCTION

DISK

X Select a Preset Voice ......................................
Select the preset voice on which the custom
voice will be based via the PART, GROUP, and
VOICE LCD [▲/▼] controls. The control below the
large ▲ and ▼ symbols scrolls quickly through the
voice list while the control below the smaller ▲ and
▼ symbols scroll more slowly.

C Select Easy or Full Edit ...............................
Press the EASY EDIT or FULL EDIT LCD
button to go to the corresponding mode. The EASY
EDIT mode cannot be selected when a drum kit
voice is selected for editing.

■

EXITING .................................................................................................................................................................................................
Exit from the CUSTOM VOICE EDIT mode
when done by pressing either the [CUSTOM VOICE
EDIT] or [EXIT] button.
NOTES

• If the edited data was not stored to disk before pressing
the “EXIT” button, the “Edited data not stored! Store
data?” confirmation will appear on the display. Pressing
“YES” will go to the STORE function, “NO” will exit from the
CUSTOM VOICE EDIT mode, or CANCEL will return to
the previous display.

SONG
PLAY

CUSTOM
VOICE EDIT

SONG
CUSTOM
RECORD ACCOMP. REC

FUNCTION

EXIT
DISK

Custom Voice Edit

The Easy Edit Parameters
Use the [ ] and [ ] LCD buttons to the right of the display to select the EDIT and STORE/CLEAR display
pages. Use the ▲ and ▼ buttons to the left of the display to select the various parameters within each page.
The COMPARE LCD button can be used during editing to compare the sound of the original voice with the edited
voice.

EDIT

■

NAME ........................................................................................................................................................................................................
A name of up to 12 characters can be entered for
each custom voice. Use the < > LCD [▲/▼]
control to move the name cursor to the various
character positions, then use the A~Z, a~z or
0~9… LCD [▲/▼] control to select the required
character for each position. The A~Z LCD [▲/▼]
control selects capital letters, the a~z LCD [▲/▼]
control selects lowercase letters, and
the 0~9… LCD [▲/▼] control selects numbers
and special characters.

■

PAN ....................................................................................
The PAN LCD [▲/▼] control can be used to
position the voice in the center of the stereo sound
field, or to the left or right in 10 steps.
NOTES

• Depending upon the selected DSP EFFECT type, some
PAN parameters may not function.

■

VIBRATO ......................................................................
Use the DEPTH, SPEED and DELAY LCD [▲/
▼] controls to set up the vibrato effect. DELAY
produces a delay between the time a key is pressed
and the beginning of the vibrato effect. “0” is the
preset value for all parameters. “+” settings increase
while “–” settings decrease the range of the effect.

TIME

Custom Voice Edit
■

TONE .........................................................................................................................................................................................................
The timbre of the voice can be varied via the
BRILLIANCE and RESONANCE LCD [▲/▼] controls. “0” is the preset value for both parameters. “+”
BRILLIANCE settings produce a brighter sound,
while “+” RESONANCE settings produce a more
“peaky” sound.

ENVELOPE ................................................................
The ENVELOPE parameters affect the volume
envelope of the voice.
The ATTACK LCD [▲/▼] control sets the time
it takes for maximum level to be reached after a key
is pressed. “0” is the preset value. “+” settings
produce a faster attack.
The DECAY LCD [▲/▼] control sets the time it
takes to reach the sustain level after the maximum
attack level has been reached. “0” is the preset value.
“+” settings produce a faster decay.
The RELEASE LCD [▲/▼] control sets the time
it takes for the sound to diminish to zero after a key
is released. “0” is the preset value. “+” settings
produce a faster release.
NOTES

• An exclamation mark (!) will appear to the right of a
parameter when the maximum setting for that parameter
has been reached.
• These parameters may have different effects on different
voices.

LEVEL

■

TIME

KEY ON

KEY OFF

Custom Voice Edit

STORE/CLEAR

■

STORE .....................................................................................................................................................................................................
Stores the edited custom voice data in the specified custom voice memory location. When this function is selected
the size of the current voice and the remaining memory capacity available for voice storage are displayed to the right
of the display. The names and sizes of all other voices currently in memory are shown in the lower section of the
display.

Z Select a Custom Voice Number
Use the STORE LCD [▲/▼] controls to select
the custom voice number to which you want to store
the newly created custom voice.

X Store the Custom Voice
Press the EXECUTE button, then press YES to
store the voice when the confirmation display appears (or NO to cancel).

■

CLEAR CUSTOM VOICE .......................................................................................................................................................
Clears unwanted custom voices from memory, making more memory available for custom voice storage.

Z Select a Custom Voice Number
Use the CLEAR LCD [▲/▼] controls to select
the custom voice you want to clear.

X Clear the Custom Voice
Press the EXECUTE button, then press YES to
clear the voice when the confirmation display appears (or NO to cancel).

Custom Voice Edit

The Full Edit Parameters
The FULL EDIT mode can be entered as described on page 78. The FULL EDIT mode can be used to edit both
internal voices and voices in the custom voice group.
Use the [ ] and [ ] LCD buttons to the right of the display to select the E1:BASIC, E2:CONTROLLER,
E3:ENVELOPE, E4:EFFECTS and STORE/CLEAR display pages. Use the ▲ and ▼ buttons to the left of the
display to select the various parameters within each page.
Many PSR-4000 orchestra voices are actually made up of two sounds “layered” together. Each of these layers
is called an “element”. SINGLE will appear in the upper left corner of the display when a 1-element voice is being
selected for editing, and DUAL will appear when a 2-element voice is selected. DRUM will appear when a drum kit
voice has been selected (drum kit voices are all single-element). When a 2-element voice which allows individual
editing of each element is selected the ELEMENT LCD button can be used to select the element to be edited: A or
B. The COMPARE LCD button can be used during editing to compare the sound of the original voice with the edited
voice.

E1:BASIC

■

NAME ........................................................................................................................................................................................................
A name of up to 12 characters can be entered for
each custom voice. Use the < > LCD [▲/▼]
control to move the name cursor to the various
character positions, then use the A~Z, a~z or
0~9… LCD [▲/▼] control to select the required
character for each position. The A~Z LCD [▲/▼]
control selects capital letters, the a~z LCD [▲/▼]
control selects lowercase letters, and the 0~9…
LCD [▲/▼] control selects numbers and special
characters.

■

WAVE (except for the DRUM KITS) ...................
Use the WAVE ▲▼ LCD [▲/▼] controls to
select a wave. The “wave” is the raw sound on which
the voice is based. 2-element voices use two waves.
The PSR-4000 has 450 waves in internal read-only
memory. Waves from custom voices can also be
used.

Custom Voice Edit
■

TUNE (except for the DRUM KITS) .............................................................................................................................................
These parameters adjust the pitch of the voice.
COARSE tunes in semitone steps and FINE tunes in
1-cent steps (a cent is 1/100th of a semitone). The
maximum COARSE range is from –24 to +24 semitones (plus or minus two octaves), and the maximum
FINE range is from –50 to +50 cents. Normal pitch
is produced when both parameters are set to “0”.

■

VOLUME (except for the DRUM KITS) ...........
Sets the element volume. The higher the value
the higher the volume.

■

KEY ON DELAY
(except for the DRUM KITS) .....................................

Sets the time before the envelope begins after a
key is pressed. The higher the value the longer the
delay.

■

• Depending upon the selected DSP EFFECT type, some
PAN parameters may not function.

E2:CONTROLLER

■

PITCH BEND WHEEL ...............................................................................................................................................................
Use the PITCH LCD [▲/▼] controls to set the
maximum PITCH BEND wheel range in semitone
steps. The maximum pitch bend wheel range is from
0 to 12 semitones.

Custom Voice Edit
■

MODULATION WHEEL ...........................................................................................................................................................
The PMD (phase modulation), AMD (amplitude modulation), and Q BIAS (resonance) LCD
[▲/▼] controls set the corresponding modulation
parameter. “0” is the preset value. “+” settings
increase the maximum modulation depth while “–”
settings decrease the maximum modulation depth
achievable with the modulation wheel. In the case of
AMD, moving the modulation wheel while a key is
already pressed will produce no effect. The effect
will be produced if the next key is pressed.

■

INITIAL TOUCH CURVE .........................................................................................................................................................
Use the ▲▼ LCD [▲/▼] controls to select any
of 6 keyboard touch response speed sensitivities:
PIANO 1, STRINGS, ORGAN, PIANO 2, WOOD
WIND, or E.PIANO. The OFFSET LCD [▲/▼]
control sets the velocity offset. “0” is the preset
value.

Custom Voice Edit

E3:ENVELOPE
AMPLITUDE ENVELOPE .....................................................................................................................................................

RATE
These parameters set the rate of output level
variation. Higher values produce faster variation.
ATTACK: Sets the speed of variation from key-on to
the maximum attack level.
DECAY1, DECAY2, DECAY3: Set the speed of variation between the maximum attack level and the
levels set by the LEVEL DECAY1, DECAY2, and
DECAY3 parameters, respectively.
RELEASE1: Sets the rate of variation from the level at
key-release to level 0 when SUSTAIN is off.
SUSTAIN: Sets the rate of variation from the level at
key-release to level 0 when SUSTAIN is on.

LEVEL

The AMPLITUDE ENVELOPE LCD [▲/▼]
controls are used to set the amplitude envelope
RATE and LEVEL parameters. Use the RATE or
LEVEL LCD button to select the corresponding
group of parameters.

TIME

LEVEL

■

e.g. Some PIANO voice can be
assigned in this point.

TIME

LEVEL
These parameters sets the envelope output level.
Higher values produce higher output.
The ATTACK level is fixed at maximum and cannot be
changed.
DECAY1, DECAY2, DECAY3: Set the levels after
DECAY1, DECAY2, and DECAY3 variation.

Custom Voice Edit
■

FILTER .....................................................................................................................................................................................................
The FILTER ENVELOPE LCD [▲/▼] controls
are used to set the filter envelope RATE and LEVEL
parameters. Use the RATE or LEVEL LCD button to
select the corresponding group of parameters.

RATE
Set the rate of cutoff frequency variation. Higher
values produce faster variation.
ATTACK: Sets the speed of variation from key-on
(BRILLIANCE LEVEL) to the level set by the
ATTACK LEVEL parameter.
DECAY1, DECAY2, DECAY3: Set the speed of variation between the attack level and the levels set by
the LEVEL DECAY1, DECAY2, and DECAY3 parameters, respectively.
RELEASE1: Sets the rate of variation from the level at
key-release to the level set by the LEVEL RELEASE1 parameter when SUSTAIN is off.
RELEASE2: Sets the rate of variation from the level
set by the LEVEL RELEASE1 parameter to that set
by the LEVEL RELEASE2 parameter when SUSTAIN is off.
SUSTAIN: Sets the rate of variation from the level at
key-release to the level set by the LEVEL SUSTAIN parameter when SUSTAIN is on.
RESONANCE: Sets the amount of emphasis at the
cutoff frequency (resonance).
LEVEL
These parameters set the amount of variation
from the preset cutoff frequency. Level “0” is the
preset value.
ATTACK: Sets the attack level after key-on.
DECAY1, DECAY2, DECAY3: Set the levels after
DECAY1, DECAY2, and DECAY3 variation.
RELEASE1, RELEASE2: Set the levels after RATE
RELEASE1 and RELEASE2 variation after keyrelease when SUSTAIN is off.
SUSTAIN: Sets the level after RATE SUSTAIN variation after key-release when SUSTAIN is on.
BRILLIANCE: Sets the brilliance level.
NOTES

• If DRUM kit is selected , SUSTAIN parameters in the
AMPLITUDE ENVELOPE or FILTER ENVELOPE cannot be changed.
• Some parameter settings may have minimal or no effect
with some voices.

Custom Voice Edit

E4:EFFECTS

■

LFO .............................................................................................................................................................................................................
The LFO parameters set the LFO (Low Frequency Oscillator) to produce cyclic pitch and amplitude modulation.
PMD: Sets the phase modulation depth. Higher
values produce deeper modulation.
AMD: Sets the amplitude modulation depth. Higher
values produce deeper modulation.
SPEED: Sets the speed of LFO variation.
WAVE: Sets the waveform of the LFO: TRI (triangular) or SAW (sawtooth).

■

DELAY VIB ..................................................................
Delay Vibrato is a vibrato effect based on LFO
modulation which has a variable delay between the
time a key is played and the beginning of the vibrato
effect.
TIME: Sets the delay between key-on and the beginning of LFO modulation. No delay is produced
when TIME is set to its minimum value. In this
case, only normal vibrato is produced (this has no
relation to the RATE value).
RATE: Sets the rate at which LFO phase modulation is
applied after the delay time — i.e. how long it takes
to reach maximum modulation level after modulation begins. The AMD has no RATE parameters.

■

CHORUS DEPTH .................................................
Sets the depth of the chorus effect. The higher the
value the greater the chorus depth.

■

DSP EFFECT ...........................................................
Use the TYPE LCD [▲/▼] controls to select a
DSP EFFECT type, and the DEPTH LCD [▲/▼]
control to set the depth of the selected DSP effect.
For some DSP effect types the DEPTH parameter is
fixed at “100” and cannot be changed.
NOTES

• Depending upon the selected DSP EFFECT type, some
PAN parameters may not function.

Custom Voice Edit

STORE/CLEAR

■

STORE .....................................................................................................................................................................................................
Stores the edited custom voice data in the specified custom voice memory location. When this function is selected
the size of the current voice and the remaining memory capacity available for voice storage are displayed to the right
of the display. The names and sizes of all other voices currently in memory are shown in the lower section of the
display.

Z Select a Custom Voice Number
Use the STORE LCD [▲/▼] controls to select
the custom voice number to which you want to store
the newly created custom voice.

X Store the Custom Voice
Press the EXECUTE button, then press YES to
store the voice when the confirmation display appears (or NO to cancel).

■

Z Select a Custom Voice Number
Use the CLEAR LCD [▲/▼] controls to select
the custom voice you want to clear.

X Clear the Custom Voice
Press the EXECUTE button, then press YES to
clear the voice when the confirmation display appears (or NO to cancel).

Custom Voice Edit

The Drum Kit Edit Mode
When a drum kit voice is selected for editing the
parameters and functions available are essentially
the same as those for the orchestra voices in the
FULL EDIT mode. Many parameters of individual
percussion voices within the DRUM KIT can be
edited independently.

The only differences are in the E1:BASIC display:
● Use the PERCUSSION parameter function to
select the desired percussion sound for editing.
Pressing any key on the keyboard will directly
select that keys percussion sound.
● The drum kit voices have no VOLUME or KEY
ON DELAY parameters.
● The PITCH parameter functions in the same way
as the TUNE FINE parameter provided for the
orchestra voices.
The E2:CONTROLLER, E3:ENVELOPE,
E4:EFFECTS, and STORE/CLEAR display parameters and functions are the same as in the orchestra
voice FULL EDIT mode.
NOTES

• Some parameters may not effect the drum kit voices in
exactly the same way as the orchestra voices.
• Some settings may result in no sound, depending on the
drum kit voice and parameter.
• The SUSTAIN parameter cannot be changed in the E3
setting.

Disk Operations
The PSR-4000 [DISK] button accesses a range of functions that are used
for storage and retrieval of floppy disk data. To select a disk operation first
press the [DISK] button, then press the LCD button corresponding to the
operation you want to perform.

SONG
PLAY

CUSTOM
VOICE EDIT

SONG
CUSTOM
RECORD ACCOMP. REC

FUNCTION

DISK

NOTES

• Please note that no other PSR-4000 functions will operate while a disk
function is in progress.
• For any disk operation an appropriate floppy disk must first be properly
inserted into the PSR-4000 disk drive. The PSR-4000 uses only 3.5"
2DD and 2HD type floppy disks. Make sure the disk write protect tab
is set to the “write enable” position if you intend to save any data to the
disk, and insert the disk with the sliding disk cover facing the disk drive
and the disk label facing upward. Before a new disk can be used to
save data, it must be formatted using the “FORMAT FD” function
described on page 96.
• If you select a disk function when no disk is present in the drive, the
“No disk! Please insert a disk.” error message will appear on the
display.

Load From Disk
Loads the specified file from a floppy disk inserted into the PSR-4000 disk drive.
If the FILE LIST display shown to the right is
not showing, press the LIST LCD button to select it.
Use the FILE LCD [▲/▼] controls to select the file
to load. The name of the selected file is displayed to
the right of the file number, and the size of the file
appears to the right of the file name in kilobytes
(approximate).
If you want to select a specific type of data to
load, press the PROGRAM LCD button.

Write protect tab
closed (unlocked
— write enabled)

Disk Operations

The LCD [▲/▼] controls can now be used to
select the type(s) of data to be loaded from the
selected file. Data types which are turned ON are
loaded.
SETUP

All setup data — see list on page 131.

STYLE
REVOICE

All STYLE REVOICE settings - page
108.

MULTI
PAD

All MULTI PAD phrase, percussion,
and chord data - page 36.

REGISTRATION

All REGISTRATION memory data page 131.

CUSTOM
STYLE

All CUSTOM STYLE data - page 69.

CUSTOM
VOICE

All CUSTOM VOICE data - page 78.

Press the LIST LCD button when you want to go
back to the FILE LIST display.
If you want to load an individual registration,
style, or voice, press the INDIVIDUAL LCD button.
In the INDIVIDUAL LOAD display use the
DATA LCD [▲/▼] control to select REGIST, STYLE
or VOICE, the CONTENT LCD [▲/▼] controls to
select the individual file to be loaded, and the DEST.
REGIST, CUSTOM STYLE, or CUSTOM VOICE
LCD [▲/▼] controls to select the destination for the
selected individual file.
When the INDIVIDUAL mode is selected and
STYLE is selected for loading, a PRE-LOAD LISTEN LCD button appears which lets you listen to the
style before actually loading it. The PRE-LOAD
LISTEN function will not work if there is too much
style data, however.
Press the LIST LCD button when you want to go
back to the FILE LIST display.
When the file and data types have been specified,
press the EXECUTE LCD button to actually begin
the load operation — the “OK to load?” confirmation display will appear.
If you want to execute the load operation press
the YES LCD button (or press the NO LCD button
to cancel the operation). “Don’t remove disk” will
appear while the data is being loaded, and the
progress of the load operation will be indicated by a
bar graph on the display.

NOTES

• Data spanning two or more disks (i.e. “split” data) cannot be
loaded by using the INDIVIDUAL LOAD function.
• When loading CUSTOM STYLE or CUSTOM VOICE data — not
in the INDIVIDUAL mode — all data will be loaded even if the
loaded file contains empty styles or voices.
• In the case of the custom style load function, SFF (optional style
file format) disks can also be loaded.

Disk Operations

Save To Disk
Saves the data listed below to a floppy disk inserted into the PSR-4000 disk drive.
NOTES

• If an unformatted disk or a disk which has not been
formatted for use with the PSR-4000 is inserted, the
“Wrong disk type or format! Format disk?” confirmation
message will appear when the SAVE TO DISK function is
selected. Press YES to format the disk or NO to cancel.

If the FILE LIST display shown to the right is
not showing, press the LIST LCD button to select it.
Use FILE LCD [▲/▼] controls to select the file to
which you want to save the data. The file list at the
bottom of the display includes all files which currently exist on the disk and one “*** NEW ***”
file. Select an existing file if you want to overwrite
the file with the new data, or select the “*** NEW
***” file if you want to create a new file. With the
exception of the “*** NEW ***” file, the size of
each file will appear to the right of the file name in
kilobytes (approximate).
If you want to specify the type(s) of data to be
saved, press the PROGRAM LCD button.
The ▲ and ▼ LCD buttons to the left of the
display can now be used to select various groups of
data, and the LCD [▲/▼] controls can be used to
select the individual type(s) of data to be saved to the
selected file. Data types which are turned ON are
saved.

SETUP

All setup data — see list on page 131.

STYLE REVOICE

All STYLE REVOICE settings - page 108.

MULTI PAD

All MULTI PAD phrase, percussion, and chord data - page 36.

REGISTRATION BANK

The ▲ and ▼ LCD buttons select REGISTRATION memory bank groups 1… 8 and 9 …
16. The LCD [▲/▼] controls turn the individual banks within the selected group ON or OFF.

CUSTOM STYLE

The ▲ and ▼ LCD buttons select CUSTOM STYLE memory groups 1… 8 or 9…12. The
LCD [▲/▼] controls turn the individual custom style within the selected group ON or OFF.

CUSTOM VOICE

The ▲ and ▼ LCD buttons select CUSTOM VOICE memory groups 1… 8, 9 … 16, 17 …
24, or 25 … 32. The LCD [▲/▼] controls turn the individual custom voice within the selected group ON or OFF.

SONG SETUP

Determines whether the above data will be loaded before song playback is started in the
SONG PLAY mode.

Disk Operations

Press the LIST LCD button when you want to go
back to the FILE LIST display.
When the file and data types have been specified,
press the EXECUTE LCD button to actually begin
the save operation — the confirmation display shown
to the right will appear.
If you want to give the file to be saved an original
file name, be sure to do so before pressing the YES
LCD button. File names can be up to 8 characters
long. Use the < > LCD [▲/▼] control to move the
name cursor to the various character positions, then
use the A~Z or 0~9… LCD [▲/▼] control to
select the required character for each position. The
A~Z LCD [▲/▼] control selects capital letters and
the 0~9… LCD [▲/▼] control selects numbers
and special characters.
When you’re ready to execute the save operation
press the YES LCD button (or press the NO LCD
button to cancel the operation). “Don’t remove disk”
will appear while the data is being saved, and the
progress of the save operation will be indicated by a
bar graph on the display.

NOTES

• When the data to be saved is larger than the remaining disk
memory, the following message will appear in the display.
Not enough disk space!
Press [RD] to reduce the amount of data;
[CD] to use a different disk;
or [SP] to split the data into more than one file.
(Split data can not be loaded individually.)
• Using “AUTOLXXX” (X = any character) as a file name or using
spaces only as a file name is not permitted. If spaces are used
as a file name they will automatically be changed to the character “_”.

Rename File/Song
Allows the name of the specified user-recorded song or user file to be changed as required.
Press the SONG LCD button to if the SONG
LIST is not showing in order to rename a song file,
or the USER FILE LCD button if the USER FILE
LIST is not showing in order to rename a user file.
Use the FILE or SONG LCD [▲/▼] controls to
select the file you want to rename. The name of the
selected file is displayed to the right of the file
number, and the size of the file appears to the right
of the file name in kilobytes (approximate).

Disk Operations

The LISTEN LCD button which appears when
the SONG LIST is selected can be used to listen to
the currently selected song — press LISTEN again
to stop playback when done.
When the user or song file to be renamed has
been selected, press the EXECUTE LCD button.
The following display will appear.

Song file names can be up to 12 characters long
and user file names can be up to 8 characters long.
Use the < > LCD [▲/▼] control to move the name
cursor to the various character positions, then use
the A~Z or 0~9… LCD [▲/▼] control to select the
required character for each position. The A~Z LCD
[▲/▼] control selects capital letters and the 0~9…
LCD [▲/▼] control selects numbers and special
characters. When a song file is selected the “a~z”
LCD [▲/▼] control is also available for lower-case
character entry.
When the file and file name have been specified,
press the YES LCD button to actually begin the
rename operation (or press the NO LCD button to
cancel the operation). “Don’t remove disk” will
appear while the file is being renamed.
NOTES

• User file names which already exist cannot be entered.

Disk Operations

Delete File/Song
Deletes the specified song or user file from the disk.
Press the SONG LCD button to if the SONG
LIST is not showing in order to delete a song file, or
the USER FILE LCD button if the USER FILE
LIST is not showing in order to delete a user file.
Use the FILE or SONG LCD [▲/▼] controls to
select the file you want to delete. The name of the
selected file is displayed to the right of the file
number, and the size of the file appears to the right
of the file name in kilobytes (approximate).

The LISTEN LCD button which appears when
the SONG LIST is selected can be used to listen to
the currently selected song — press LISTEN again
to stop playback when done.
When the file to be deleted has been selected,
press the EXECUTE LCD button. The “OK to delete? display will appear.

If you want to execute the delete operation press
the YES LCD button (or press the NO LCD button
to cancel the operation). “Don’t remove disk” will
appear while the file is being deleted.
NOTES

• Files deleted from disk can not be restored (there is no
“Undo” function), so be sure you’ve selected the right file
before actually executing the delete operation.

Disk Operations

Format FD
Formats a floppy disk for use with the PSR-4000.
After inserting a new floppy disk into the disk
drive, press the EXECUTE LCD button to actually
begin the format operation — the “OK to format?”
confirmation display will appear.

If you want to execute the format operation press
the YES LCD button (or press the NO LCD button
to cancel the operation). “Don’t remove disk” will
appear while the disk is being formatted, and the
progress of the format operation will be indicated by
a bar graph on the display.
NOTES

• The PSR-4000 uses only 3.5" 2DD or 2HD type floppy
disks.
• Formatting a disk completely erases all data on the disk,
so be sure that the disk you’re formatting does not contain
important data!

Song Copy
This function can be used to copy songs recorded on the PSR-4000 to a different number/name on the same
floppy disk, or from one floppy disk to another. A perfect way to make backup copies of important songs.
If the SONG LIST display shown to the right is
not showing, press the SOURCE LCD button to
select it. Use the SONG LCD [▲/▼] controls to
select the file to copy. The name of the selected file
is displayed to the right of the file number, and the
size of the file appears to the right of the file name
in kilobytes (approximate). The LISTEN LCD button can be used to listen to the currently selected
source song — press LISTEN again to stop playback when done.

Disk Operations

When the source song has been selected press the
DESTINATION LCD button and use the DIR ▲▼
LCD [▲/▼] controls to select the destination disk.
Select “another FD” to copy to a different floppy
disk, or “FLOPPY DISK” to copy to the same
floppy disk.
Press the EXECUTE LCD button to begin the
copy operation. At this point the display shown
below will appear and you will have a chance to
change the song name before it is copied.

If you want to give the file to be copied an
original file name, be sure to do so before pressing
the YES LCD button. File names can be up to 12
characters long. Use the < > LCD [▲/▼] control to
move the name cursor to the various character positions, then use the A~Z or 0~9… LCD [▲/▼]
control to select the required character for each
position. The A~Z LCD [▲/▼] control selects capital letters and the 0~9… LCD [▲/▼] control
selects numbers and special characters.
When you’re ready to execute the copy operation
press the YES LCD button (or press the NO LCD
button to cancel the operation). “Don’t remove disk”
will appear while the data is being copied. If you’re
copying to a different floppy disk the PSR-4000 will
prompt when to insert the copy destination disk.
Follow the on-screen instructions.

The PSR-4000 “Functions”
The PSR-4000 [FUNCTION] button selects 8 groups of functions
that access a number of related parameters. Here’s a list of the functions and the manual page numbers on which they are described in
detail.
[F1] SCALE (ARABIC)/VOICE PART .................................................. 100
[F2] SPLIT POINT/ABC MODE/MULTI PAD ....................................... 102
[F3] CONTROLLER .............................................................................104
[F4] STYLE REVOICE .......................................................................... 108
[F5] REVERB/CHORUS/DSP EFFECT ............................................... 110
[F6] HARMONY/REGISTRATION ........................................................ 114
[F7] UTILITY .........................................................................................115
[F8] MIDI ...............................................................................................116

General Function Selection & Editing Procedure
Press the [FUNCTION] button to engage the function mode.
SONG
PLAY

CUSTOM
VOICE EDIT

SONG
CUSTOM
RECORD ACCOMP. REC

Each of the function groups is selected by pressing the corresponding LCD button. In some cases all
of the parameters included in a function group will
be available in a single display “page”, and the
various parameters can be accessed via the ▲ and ▼
LCD buttons — as in the F3: CONTROLLER display, below.

FUNCTION

DISK

The PSR-4000 “Functions”

In cases where the number of parameters included in the function group is too large to fit on a
single display page, several pages may be available,
and
LCD buttons.
selectable via the

In all cases the selected parameter can be edited
via the appropriated labeled or positioned LCD [▲/
▼] controls.

■

The [EXIT] Button .......................................................................................................................................................................
The [EXIT] or [FUNCTION] button can be
used at any time to exit from a function and return to
the function menu. Pressing the [EXIT] or [FUNCTION] button while the FUNCTION MENU is
showing will return you to the normal play mode.

EXIT

F1: Scale (Arabic)/Voice Part
The PSR-4000 has a range of advanced tuning and other voicerelated functions which are all included in the F1 function group.

■

SCALE (ARABIC) .........................................................................................................................................................................
Selects either the normal equal temperament scale
or an “arabic” scale in which each note can be tuned
over a 127-cent range.
Use the SCALE LCD [▲/▼] controls to select
either the EQUAL TEMPERAMENT or ARABIC
scale.
When the ARABIC scale is selected you can use
the TUNE NOTE LCD [▲/▼] controls to select the
note you want to tune (the selected note will be
highlighted in the graphic keyboard in the upper
section of the display), then use the large ▲ and ▼
LCD [▲/▼] control to coarse-tune the selected key
in 25-cent steps, and the small ▲ and ▼ LCD [▲/▼]
control to fine-tune the selected note in 1-cent steps.
The tuning range is from “–64” through “0” to
“+63”. Each increment equals one cent (one “cent”
is one hundredth of a semitone). The current tuning
of each note is shown in the corresponding key of the
graphic keyboard display.

■

VOICE PART ......................................................................................................................................................................................
● PART TUNE
Individual tuning parameters are provided for
the LEFT, RIGHT 1, RIGHT 2, and LEAD voices,
allowing each voice to be tuned over a ±100-cent
range.
When the AUTO mode is selected, part tuning is
automatic and the individual parts cannot be tuned
manually. To tune manually, first use the MODE
LCD [▲/▼] control to select the MANUAL mode,
then use the LEFT, R1, R2, or LEAD LCD [▲/
▼]control to tune the corresponding voice as required. The current tuning value for each part is
shown next to the PART TUNE parameter in the
upper section of the display.

100

F1: Scale (Arabic)/Voice Part

● OCTAVE
Shifts the pitch of the LEFT, RIGHT 1, RIGHT
2, or LEAD voice up one octave (“+1”) or down one
octave (“–1”). A setting of “0” produces the normal
pitch for that voice. Use the LEFT, R1, R2, or LEAD
LCD [▲/▼] control to set as required.
NOTES

• These parameters are also available in the Octave Change
function — page 18.
• Some voices may exhibit sudden pitch changes in the
highest and lowest ranges of the keyboard when shifted
up or down by an octave. The pitch bend wheel may also
cause sudden pitch changes.

● PAN
Sets the apparent position of the LEFT, RIGHT
1, RIGHT 2, or LEAD voice in the stereo sound
field. The graphic display indicates the approximate
location of the sound between the left and right
speakers. Use the LEFT, R1, R2, or LEAD LCD [▲/
▼] control to set as required.

101

F2: Split Point/ABC Mode/Multi Pad
The F2 functions all pertain to the PSR-4000’s accompaniment features — i.e. the accompaniment split point, the ABC mode, and the
multi-pad repeat and chord match modes.

■

SPLIT POINT/ABC MODE ...................................................................................................................................................
● SPLIT POINT
The PSR-4000 has two programmable split points
— one which divides the LEFT and RIGHT/LEAD
orchestra parts (page 16), and one which divides the
auto-accompaniment and manual sections of the
keyboard when AUTO BASS CHORD accompaniment is engaged (page 27). The former is indicated
by the “L” marker and the latter by the “A” marker
above the graphic keyboard. The current split points
are indicated on the display both by the split markers
and the “splits” in the graphic keyboard. The “L”
split point only appears on the graphic keyboard
display when the LEFT orchestra part is on, and the
“A” split point only appears when the AUTO BASS
CHORD auto accompaniment feature is on.
The split points can be set in two ways: either use
the SPLIT POINT A and SPLIT POINT L LCD
[▲/▼] controls, or press the desired key on the
keyboard while holding the A or L DIRECT SETTING LCD button (or vice-versa). The new split
point will be indicated on the graphic keyboard in
the LCD.

● ABC MODE
Use the ABC MODE LCD [▲/▼] controls to
select the SINGLE FINGER, FINGERED 1, FINGERED 2, FULL KEYBOARD, AUTO MIDI BASS,
or MANUAL MIDI BASS mode. If you select the
MANUAL MIDI BASS mode, and press the BASS
VOICE LCD button which appears, you can use the
GROUP and ▲/▼ LCD [▲/▼] controls to specify
the bass voice to be used. Press the ABC MODE
LCD button to return to the ABC MODE display as
required.

102

F2: Split Point/ABC Mode/Multi Pad
■

MULTI PAD ..........................................................................................................................................................................................
The repeat and chord match settings for PHRASE/CHORD MULTI PAD playback can be accessed
via this display. The repeat and chord match parameters can be accessed by pressing the REPEAT or
CHORD MATCH LCD button.

● REPEAT
When a check mark appears in a REPEAT box in
the MULTI PAD display, the corresponding pad —
PHRASE or CHORD — will playback repeatedly
until stopped by either pressing the same MULTI
PAD again, or by pressing the [REC/STOP] button.
Use the LCD [▲/▼] controls to turn repeat for
the corresponding pads ON or OFF as required.
NOTES

• The default repeat settings are: pads 1…4 OFF; pads
5…8 ON.

● CHORD MATCH
When a check mark appears in a CHORD MATCH
box in the MULTI PAD display, the phrase played
by the corresponding PHRASE pad will be automatically re-harmonized to match the accompaniment chords if the PHRASE pad is played while
AUTO BASS CHORD accompaniment is playing.
Use the LCD [▲/▼] controls to turn the chord
match function for the corresponding pads ON or
OFF as required.
NOTES

• The chord match function is only available for pads 1
through 4 (the PHRASE pads).
• The default chord match settings are: 1 & 2 OFF; 3 & 4 ON.

103

F3: Controller
The F3 function group includes a range of functions that affect how
the PSR-4000 responds to control via the keyboard, a foot controller
plugged into the rear-panel FOOT VOLUME jack, footswitches
plugged into the rear-panel FOOT SW jacks, the [SUSTAIN] button,
the PITCH BEND wheel, and the MODULATION wheel.

■

FOOT CONTROLLER ...............................................................................................................................................................
● VOLUME
Determines whether an optional YAMAHA FC7
Foot Controller plugged into the rear-panel FOOT
VOLUME jack will control master volume, or only
the volume of specified parts and voices.
Use the TYPE LCD [▲/▼] control to select
VOLUME for master volume control or INDIVIDUAL for individual part/voice volume control.
Individual part and voice assignment parameters
for the M.PAD, ACMP, LEFT, R1, R2, and LEAD
parts are available when the INDIVIDUAL type is
selected. Use the corresponding LCD [▲/▼] controls to turn volume control for the corresponding
parts ON or OFF as required.
NOTES

• Normally you’ll want to be able to apply expression control
to the orchestra voices without affecting the accompaniment and rhythm sound, so the INDIVIDUAL type should
be selected and the voices you want to control turned on
while the remaining parts are turned off.

● SW1 (FOOTSWITCH 1) &
SW2 (FOOTSWITCH 2)
Determine the functions of footswitches plugged
into the rear-panel FOOT SWITCH 1 and FOOT
SWITCH 2 jacks, and to which of the PSR-4000
voices the footswitches will apply.
Use the TYPE LCD [▲/▼] controls to select one
of the following footswitch functions:

104

F3: Controller

When the SUSTAIN, SOSTENUTO, or SOFT
type is selected, use the LEFT, R1, R2, and LEAD
LCD [▲/▼] controls to turn footswitch control for
the corresponding parts ON or OFF as required.
NOTES

• The sustain effect is applied to the specified orchestra
part(s) only when the panel [SUSTAIN] button is turned on
or when the sustain pedal is pressed.
• The panel [SUSTAIN] button will not function while a
footswitch to which the sustain effect is assigned is used.

SUSTAIN

Standard sustain footswitch operation. When the footswitch is pressed notes played have a
long sustain. Releasing the footswitch immediately stops (damps) any sustained notes.

SOSTENUTO

If you play a note or chord on the keyboard and press the footswitch while the note(s) are
held, those notes will be sustained as long as the footswitch is held (as if the damper pedal
had been pressed) but all subsequently played notes will not be sustained. This makes it
possible to sustain a chord, for example, while other notes are played “staccato.”

SOFT

Pressing the footswitch subtly reduces the volume and slightly changes the timbre of notes
played. The SOFT effect only applies to certain voices — PIANO, for example.

TAP TEMPO

While the accompaniment is stopped, or during the SYNCHRO START mode before the
accompaniment is started, the footswitch can be used to set any desired tempo (within the
PSR-4000’s 32 to 280 beats per minute range) by simply tapping on the switch at the required tempo.
Tap 4 times for an accompaniment with a 4/4 time signature, 3 times for 3/4, and 5 times for
5/4.
If the accompaniment is started before the required number of taps has been entered, the
Tap Start setting will be ignored. The Tap Start setting will also be ignored if several seconds elapse before the required number of taps have been entered, if a different style is
selected, or if the accompaniment [START/STOP] button is pressed.

REGISTRATION +

Recall next highest (increment) registration. “1-1” is selected after “16-8”.

REGISTRATION –

Recall next lowest (decrement) registration. “16-8” is selected after “1-1”.

START/STOP

Same as panel [START/STOP] button.

ROTARY SPEAKER

Alternately selects the SLOW and FAST speeds of the rotary speaker when a DSP EFFECT
Rotary Speaker effect is selected (page 112).

HARMONY

Harmony occurs only while footswitch pressed.

INTRO/FILL to A

Same as panel [INTRO/FILL to A] button.

INTRO/FILL to B

Same as panel [INTRO/FILL to B] button.

ENDING/rit.

Same as panel [ENDING/rit.] button.

FADE IN/OUT

Same as panel [FADE IN/OUT] button.

F.CHORD 1/2

The footswitch alternately switches between the ABC FINGERED 1 and FINGERED 2
modes (page 20).

BASS HOLD

Holds the bass note so that “pedal bass” progressions can be produced using ABC.

PERCUSSION

Footswitch plays a percussion instrument selected by the ASSIGN LCD [▲/▼] controls (the
latter appears when the PERCUSSION type is selected).

ACCOMP. BREAK

Pressing the footswitch produces a break in the accompaniment for as long as the pedal is
held. The accompaniment will start again from the top of the next odd-numbered measure
when the pedal is released.

PUNCH IN/OUT

Sets punch-in and punch-out points when song record mode is set to “Punch” (page 63).

105

F3: Controller

■ PANEL CONTROLLER ...........................................................................................................................................................
● SUSTAIN BUTTON
Determines to which of the PSR-4000 voices the
panel [SUSTAIN] button will apply.
Use the LEFT, R1, R2, and LEAD LCD [▲/▼]
controls to turn [SUSTAIN] button control for the
corresponding voices ON or OFF as required. Accompaniment part assignments are the same as those
set for the footswitch.

● PITCH BEND WHEEL
Determines to which of the PSR-4000 voices the
PITCH BEND wheel will apply.
Use the LEFT, R1, R2, and LEAD LCD [▲/▼]
controls to turn PITCH BEND wheel control for the
corresponding voices ON or OFF as required.

● MODULATION WHEEL
Determines to which of the PSR-4000 voices the
MODULATION wheel will apply.
Use the LEFT, R1, R2, and LEAD LCD [▲/▼]
controls to turn MODULATION wheel control for
the corresponding parts ON or OFF as required.

106

F3: Controller

● INITIAL TOUCH
Sets the touch response OFF level and sensitivity
curve of the keyboard initial touch response, and
determines to which of the PSR-4000 voices touch
response will apply.
Use the OFF LEVEL LCD [▲/▼] control to set
the level at which touch response is turned off.
Use the SENSITIVITY LCD [▲/▼] controls to
select the desired sensitivity curve.
Use the LEFT, R1, R2, and LEAD LCD [▲/
▼]controls to turn initial touch response control for
the corresponding parts ON or OFF as required.

HARD 2

Requires the keys to be played very hard to produce maximum loudness.

HARD 1

Requires the keys to be played quite hard to produce maximum loudness.

NORMAL

Produces a fairly “standard” keyboard response.

SOFT 1

Not a sensitivity as the “SOFT 2” setting, but maximum loudness can still be easily produced with relatively light key pressure.

SOFT 2

Allows maximum loudness to be produced with very light key pressure.

107

F4: Style Revoice
This function allows you to “revoice” the currently selected style: i.e.
change the volume, voice, reverb depth, and chorus depth settings for
each accompaniment part. Style Revoice settings are retained in
memory if the MEMORY BACKUP parameter in the F7 UTILITY page
is ON as long as a good set of backup batteries is installed.

● VOLUME OFFSET
Use the RHY1, RHY2, BASS, CHD1, CHD2,
PAD, PHR1, and PHR2 LCD [▲/▼] controls to set
the volume offset for the corresponding accompaniment parts. The volume offset range is from “–50”
to “+50”. These settings are relative to the volume
parameters available via the ACCOMPANIMENT
VOLUME MIXER display. The amount of volume
offset set for each part is shown by a graphic volume
bar to the right of the VOLUME parameter in the
upper section of the display. Press the RECALL
PRESET DATA LCD button to recall all preset
volume offset settings (all “0”).

● VOICE
Use the [ ] LCD button to switch between the
RHY1/RHY2/BASS/CHD1 and CHD2/PAD/PHR1/
PHR2 parameter groups. Use the GROUP LCD [▲/
▼] controls for each part to select the voice group,
and the ▲/▼ LCD [▲/▼] controls to select the
individual voice for that part. Select “– –” to specify
the preset voice for any individual part. When the
preset voice is selected a “P” appears in the corresponding box to the right of the VOLUME parameter in the upper section of the display. A “V”
appears when a non-preset voice has been specified.
Press the RECALL PRESET DATA LCD button to
recall all preset voices.

108

F4: Style Revoice

● REVERB DEPTH
Use the RHY1, RHY2, BASS, CHD1, CHD2,
PAD, PHR1, and PHR2 LCD [▲/▼] controls to set
the reverb depth for the corresponding accompaniment parts. The reverb depth range is from “0” (no
reverb) to “100” (maximum reverb), or “PRESET”.
When the preset reverb depth is selected a “P”
appears in the corresponding box to the right of the
REVERB parameter in the upper section of the
display. The reverb depth for each part which has a
non-preset setting is shown by a graphic depth bar to
the right of the REVERB parameter in the upper
section of the display. Press the RECALL PRESET
DATA LCD button to recall all preset reverb depth
settings.

● CHORUS DEPTH
Use the RHY1, RHY2, BASS, CHD1, CHD2,
PAD, PHR1, and PHR2 LCD [▲/▼] controls to set
the chorus depth for the corresponding accompaniment parts. The chorus depth range is from “0” (no
chorus) to “100” (maximum chorus), or “PRESET”.
When the preset chorus depth is selected a “P”
appears in the corresponding box to the right of the
CHORUS parameter in the upper section of the
display. The chorus depth for each part which has a
non-preset setting is shown by a graphic depth bar to
the right of the CHORUS parameter in the upper
section of the display. Press the RECALL PRESET
DATA LCD button to recall all preset chorus depth
settings.

109

F5: Reverb/Chorus/DSP Effect
The PSR-4000 has 16 reverb-based effects, a chorus effect, and 50
DSP (Digital Signal Processor) effects that can be selected via the
REVERB/CHORUS/DSP EFFECT function display. The selected
reverb, chorus, and DSP effect settings are applied to the sound when
the [REVERB], [CHORUS], and [DSP EFFECT] buttons are used (see
page34).

■

REVERB TYPE & DEPTH .....................................................................................................................................................
● REVERB TYPE
Selects the reverb type.
If the REVERB TYPE parameters are not showing on the lower section of the display, press the
TYPE LCD button. Use the LCD [▲/▼] controls to
select the desired reverb effect. The name of the
current reverb type is shown to the right of the
REVERB TYPE parameter in the upper section of
the display.
The Reverb Effects
1 Hall 1

9 Stage 1

2 Hall 2

10 Stage 2

3 Hall 3

11 Plate 1

4 Hall 4

12 Plate 2

5 Room 1

13 White Room

6 Room 2

14 Tunnel

7 Room 3

15 Canyon

8 Room 4

16 Basement

NOTES

• Try out all of the effects to get a feel for what they can do
to your sound.
• When a new style is selected, an appropriate reverb type
for that style is automatically selected.

110

F5: Reverb/Chorus/DSP Effect

● REVERB PARAMETER EDIT
When the REVERB TYPE parameters are selected as described above, the PARAMETER EDIT
LCD button will appear, pressing this button gives
you access to the individual reverb parameters for
the currently selected reverb type. Use the LCD [▲/
▼] control below the number corresponding to the
parameter you want to edit. Press the TYPE LCD
button to return to the REVERB TYPE parameters
when done.
NOTES

• The default parameters will automatically be reselected
whenever a new reverb type is selected.

1. REVERB TIME
Range: 0.3 … 30 sec.
Sets the amount of time it takes for the reverb sound to decay by 60 dB (virtually to silence).
2. DIFFUSION
Range: 0 … 10
Adjusts the left-right “spread” of the reverb sound. The higher the value the greater the spread.
3. INITIAL DELAY
Range: 0 … 63
The length of the initial delay before the actual reverb sound begins (in milliseconds). The higher the value the
longer the initial delay.
4. HPF CUTOFF
Range: Thru, 22Hz … 8.0kHz
The cutoff frequency of the high-pass filter applied to the reverb sound. No filter is applied when set to “Thru”.
5. LPF CUTOFF
Range: 1.0kHz … 18kHz, Thru
The cutoff frequency of the low-pass filter applied to the reverb sound. No filter is applied when set to “Thru”.

● REVERB DEPTH
Independently sets the depth of the selected
reverb effect for the multi pads, accompaniment,
left voice, right 1 voice, right 2 voice, and lead voice
If the REVERB DEPTH parameters are not showing
on the lower section of the display, press the DEPTH
LCD button. Use the M.PAD, ACMP, LEFT, R1,
R2, and LEAD LCD [▲/▼] controls to set the depth
of the reverb effect as required for the corresponding
parts. The depth range is from “0” (no reverb effect)
to “100” (maximum reverb depth).
NOTES

• In addition to the graphic depth controls directly above the
LCD [▲/▼] controls, reverb depth for each part is represented by a vertical bar to the right of the REVERB DEPTH
parameter in the upper section of the display. The longer
the bar, the greater the reverb depth.
• When a new reverb type is selected, the preset depth
value for that type is automatically recalled.
• Each part and voice has a preset depth value and range
over which the depth can be varied. Depth variations may
therefore not have the same audible effect with all voices.

111

F5: Reverb/Chorus/DSP Effect
■

CHORUS DEPTH ..........................................................................................................................................................................
Independently sets the depth of the chorus effect
for the multi pads, accompaniment, left voice, right
1 voice, right 2 voice, and lead voice
Use the M.PAD, ACMP, LEFT, R1, R2, and
LEAD LCD [▲/▼] controls to set the depth of the
chorus effect as required for the corresponding parts.
The depth range is from “0” (no chorus effect) to
“100” (maximum chorus depth).
NOTES

• In addition to the graphic depth controls directly above the
LCD [▲/▼] controls, the chorus depth for each part is
represented by a vertical bar to the right of the CHORUS
DEPTH parameter in the upper section of the display. The
longer the bar, the greater the chorus depth.
• When a new style is selected, the preset chorus type and
depth value for that style is automatically recalled.
• Each part and voice has a preset depth value and range
over which the depth can be varied. Depth variations may
therefore not have the same audible effect with all voices.

■

DSP EFFECT TYPE & DEPTH ........................................................................................................................................
● DSP EFFECT TYPE
Selects the effect to be applied when the [DSP
EFFECT] button is turned on (page 34).
If the DSP EFECT TYPE parameters are not
showing on the lower section of the display, press
the TYPE LCD button. Use the LCD [▲/▼] controls
to select the desired type. The name of the current
DSP effect type is shown to the right of the DSP
EFFECT parameter in the upper section of the
display. See “THE DSP EFFECTS AND PARAMETERS”, below for a list of the effects and their
parameters.

112

F5: Reverb/Chorus/DSP Effect

● DSP EFFECT PARAMETER EDIT
When the DSP EFFECT TYPE parameters are
selected as described above, the PARAMETER EDIT
LCD button will appear, pressing this button gives
you access to the individual DSP effect parameters
for the currently selected DSP type. Use the LCD
[▲/▼] control below the number corresponding to
the parameter you want to edit. Press the TYPE LCD
button to return to the DSP EFFECT TYPE parameters when done. See “THE DSP EFFECTS AND
PARAMETERS”, below for a list of the effects and
their parameters.
The PRIORITY LCD [▲/▼] control lets you
determine whether the preset DSP EFFECT type
and depth settings for the LEAD or RIGHT 1 voice
will be selected whenever a voice is selected, or
whether the settings you make in this display affect
all voices. Select LEAD or RIGHT 1 to use the
preset DSP EFFECT settings for those voices, or
MANUAL to use your own settings for all voices.
NOTES

• The default parameters will automatically be reselected
whenever a new DSP effect type is selected.
• Some of the DSP TYPEs contain parts which cannot be
selected and changed. Such parts will appear inverted.

● DSP EFFECT DEPTH
Independently sets the depth of the selected DSP
effect for the multi pads, accompaniment, left voice,
right 1 voice, right 2 voice, and lead voice
If the DSP EFFECT DEPTH parameters are not
showing on the lower section of the display, press
the DEPTH LCD button. Use the M.PAD, ACMP,
LEFT, R1, R2, and LEAD LCD [▲/▼] controls to
set the depth of the DSP effect as required for the
corresponding parts. The depth range is from “0”
(no DSP effect) to “100” (maximum DSP effect
depth).
NOTES

• In addition to the graphic depth controls directly above the
LCD [▲/▼] controls, DSP effect depth for each part is
represented by a vertical bar to the right of the DSP
EFFECT DEPTH parameter in the upper section of the
display. The longer the bar, the greater the DSP effect
depth.
• For a list and description of DSP effects and parameters,
refer to page 143.

113

F6: Harmony/Registration
■

HARMONY ...........................................................................................................................................................................................
Selects the type of harmony to be applied when
the [HARMONY] button is turned on (page 33),
and the volume of the harmony sound.
Use the TYPE LCD [▲/▼] controls to select the
desired harmony type. Use the VOLUME LCD [▲/
▼] control to set the volume of the harmony sound.
The Harmony Types
1.
2.
3.
4.
5.
6.
7.
8.

Duet
Trio
4 Part
4 Part Jazz
Country
Octave
Tremolo Slow
Tremolo Fast

9.
10.
11.
12.
13.
14.
15.
16.

Tremolo Duet
Strumming
BackingVocal
Add Trp.&Sax
Add Strings
Gtr. Picking
Banjo Player
In The Forest

NOTES

• The HARMONY feature cannot be turned on when the FULL
KEYBOARD ABC mode is selected.

■

REGISTRATION .............................................................................................................................................................................
● NAME
You can enter descriptive names up to 16 characters in length for each registration setup via the
NAME function. The name entered is applied to the
currently selected registration setup.
If necessary, begin by select the desired registration
bank ad number. Use the < > LCD [▲/▼] controls to
move the name cursor to the various character positions, then use the A~Z, a~z, or 0~9… LCD [▲/▼]
control to select the required character for each position. The A~Z LCD [▲/▼] control selects capital
letters, the a~z LCD [▲/▼] control selects lowercase letters, and the 0~9… LCD [▲/▼] control selects numbers and special characters.
NOTES

● FREEZE GROUP SETTING
You can specify which settings are affected by
the FREEZE function via the FREEZE GROUP
SETTING function.
Use the GROUP SELECT LCD [▲/▼] controls
to select a setting you want to freeze or “un-freeze”,
then use the MARK LCD [▲/▼] control to set or
remove the check mark for that setting. Repeat until
all settings are marked or un-marked as required.

114

F7: Utility
The F7: UTILITY function accesses utility functions that let you turn
memory backup on or off, set a number of display modes, and recall
the factory preset data.

■

MEMORY BACKUP ....................................................................................................................................................................
● MEMORY BACKUP
This function turns memory backup on or off.
Use the MEMORY BACK UP LCD [▲/▼] controls
to turn memory backup ON or OFF.
NOTES

• The data backed up (retained in memory even when the
power is turned off) by the PSR-4000 are listed on page
131 in the MEMORY BACKUP column. When memory
backup is turned OFF, the initial factory settings are
automatically recalled whenever the power is turned on.

● DISPLAY - MIDI BANK SEL. & PROG.
CHANGE #, TIME
Determines whether the MIDI bank select and
program change numbers for each voice will be
shown along with the voice number and name on the
voice list display, and how long the list and message
displays remain on the LCD before they disappear.
Use the MIDI BANK SEL. & PROG. CHANGE
# LCD [▲/▼] controls to turn the MIDI bank select
and program change numbers ON or OFF.
Use the TIME LIST and MESSAGE LCD [▲/
▼]controls to set the on-screen time of the list and
message displays, respectively. The higher the value
the longer the on-screen time.

■

RECALL PRESET DATA ........................................................................................................................................................
Recalls the specified initial factory settings.
Use any of the LCD [▲/▼] controls to select the
type of factory preset data you want to recall (see list
below), then press the EXECUTE LCD button — the
“Ready to recall preset data” confirmation display
will appear.
If you want to execute the recall preset data
operation press the YES LCD button (or press the
NO LCD button to cancel the operation). “Completed” will appear briefly when the job is finished.

115

F8: MIDI
MIDI, the Musical Instrument Digital Interface, is a world-standard communication interface that allows MIDI-compatible musical instruments and equipment to
share musical information and control one another. This makes it possible to create
“systems” of MIDI instruments and equipment that offer far greater versatility and
control than is available with isolated instruments. The PSR-4000 offers a range of
MIDI functions that allow it to be used in even sophisticated MIDI systems.
NOTES

• Always use a high-quality MIDI cable to connect MIDI OUT to MIDI IN terminals. Never use MIDI cables longer
than about 15 meters, since cables longer than this can pick up noise which can cause data errors.

SYSTEM
■

LOCAL CONTROL ......................................................................................................................................................................
The LOCAL CONTROL parameters determine
whether the corresponding PSR-4000 parts/voices
are controlled via the PSR-4000 keyboard or not.
When local control is on, the PSR-4000 keyboard
controls its internal tone generator, allowing the
internal voices to be played directly from the keyboard. Local control can be turned off, however, so
that the PSR-4000 keyboard does not play the specified voices, but the appropriate MIDI information is
still transmitted via the MIDI OUT connector when
notes are played on the keyboard. At the same time,
the internal tone generator responds to MIDI information received via the MIDI IN connector. This
means that while an external sequencer or MIDI
computer, for example, plays the PSR-4000’s voices,
an external tone generator can be played from the
PSR-4000 keyboard.
Use the M.PAD, ACMP, LEFT, R1, R2, and
LEAD LCD [▲/▼] controls to turn local control of
the corresponding parts/voices ON or OFF. A check
mark appears in the appropriate LOCAL CONTROL
box in the upper part of the display when local
control of the corresponding part/voice is turned on.

116

F8: MIDI
■

CLOCK & TRANSPOSE .........................................................................................................................................................
● CLOCK
Determines whether the PSR-4000 is controlled
by its own internal clock or a MIDI clock signal
received from an external device. INTERNAL is the
normal CLOCK setting when the PSR-4000 is being
used alone. If you are using the PSR-4000 with an
external sequencer, MIDI computer, or other MIDI
device, and you want the PSR-4000 to be synchronized to the external device, set this function to
EXTERNAL. In the latter case, the external device
must be connected to the PSR-4000 MIDI IN connector, and must be transmitting an appropriate
MIDI clock signal.
● TRANSPOSE
When the TRANSPOSE TRANSMIT parameter
is turned OFF, the PSR-4000 transpose settings are
not applied to transmitted MIDI data. When turned
ON, the PSR-4000 transpose settings apply to transmitted MIDI data in the same they do to notes played
on the PSR-4000 itself. When the TRANSPOSE
RECEIVE parameter is turned OFF note data received by the PSR-4000 is not transposed, and when
set to ON the received note data is transposed according to the current PSR-4000 transpose setting.
A check mark appears in the TRANSPOSE TRANSMIT or RECEIVE box when the corresponding
parameter is ON.

■

MESSAGE SWITCH ...................................................................................................................................................................
● START/STOP
The START/STOP TRANSMIT parameter turns
MIDI transmission of MIDI start and stop commands corresponding to starting or stopping the
PSR-4000 accompaniment or song play/record functions ON or OFF. The START/STOP RECEIVE
parameter turns MIDI reception of MIDI start and
stop commands generated by external equipment
ON or OFF. A check mark appears in the MESSAGE
SW START/STOP TRANSMIT or RECEIVE box
when the corresponding parameter is ON.

117

F8: MIDI

● EXCLUSIVE
The EXCLUSIVE TRANSMIT parameter turns
MIDI transmission of MIDI exclusive data (voice
and setup data) ON or OFF. The EXCLUSIVE
RECEIVE parameter turns MIDI reception of MIDI
exclusive data generated by external equipment ON
or OFF. A check mark appears in the MESSAGE
SW EXCLUSIVE TRANSMIT or RECEIVE box
when the corresponding parameter is ON.

TRANSMIT
This display page allows you to specify which PSR-4000 voices and parts will be transmitted via which MIDI
channels (there are 16 MIDI channels), and to specify which types of data will be transmitted for each channel.

● TRANSMIT MONITOR
The TRANS. MONITOR (transmit monitor) at
the top of the display indicates when data is being
transmitted on any of the 16 MIDI channels: The
dots corresponding to each channel (1 … 16) flash
briefly whenever any data is transmitted on the
channel(s).
● CHANNEL
Use either the ▲ and ▼ LCD buttons to the left
of the display, or the CH LCD [▲/▼] control to
select the channel to which you want to assign a part
or change a data switch setting. The channel numbers are show in the leftmost column in the display.
● PART
The PART LCD [▲/▼] controls select the voice
or part which will be transmitted via the currently
selected channel. Only one voice or part can be
specified per channel. Any of the parts listed below
can be selected. If one part is assigned to multiple
channels, only the lowest-numbered channel will be
used.

118

F8: MIDI

OFF

No data will be transmitted on the selected channel.

RIGHT 1
RIGHT 2
LEAD
LEFT

Only data corresponding to the specified voice will be transmitted on the selected channel.

HARMONY 1
HARMONY 2
HARMONY 3

The Harmony feature (page 33) produces a maximum of three harmony notes. These settings
correspond to each of the harmony notes.

MULTI PAD 1
MULTI PAD 2
MULTI PAD 3
MULTI PAD 4

Multi pad phrases from the corresponding pad are transmitted via the selected channel. When a
pad is played in the PERCUSSION mode, however, the data is transmitted on the channel to
which MULTI PAD 1 is assigned.
CHORD pad data is transmitted as note data on the channels to which the appropriate accompaniment parts are assigned (RHY 1 … ACCOMP PHRASE2).

ACCOMP RHY 1
ACCOMP RHY 2
ACCOMP BASS
ACCOMP CHORD 1
ACCOMP CHORD 2
ACCOMP PAD
ACCOMP PHRASE1
ACCOMP PHRASE2

The specified accompaniment part is transmitted via the selected channel.

● NOTE, CONTROL CHANGE,
PROGRAM CHANGE, & PITCH BEND
SWITCH
These “switches” turn transmission of the specified data type on or off. Use the NOTE, CNTCNG,
PRGCNG, and PITCHBND LCD [▲/▼] controls to
turn transmission of the corresponding data on or
off. A check mark appears in the appropriate box
when the corresponding switch is turned on.

NOTE

This switch turns transmission of the note data on or off. When off, no notes will be produced by an
external instrument or tone generator even when the voice or part assigned to the selected channel is
played. Note transmission can be turned off, for example, you only want the external device to respond
to program change numbers, changing the selected voice without actually playing it.

CNTCNG

Turns transmission of control change data on or off. Control change data includes modulation wheel,
foot controller, and any other controller data (except the pitch bend wheel, which has its own switch,
below).

PRGCNG

Turns transmission of program change data on or off. Program change data corresponds to voice or
“patch” numbers, and is used to select the corresponding voices on an external MIDI device.

PITCHBND

Turns transmission of pitch bend wheel data on or off.

119

F8: MIDI

RECEIVE
This display page allows you to specify the MIDI receive mode for each PSR-4000 MIDI channels, and to
specify which types of data will be received via each channel.

● RECEIVE MONITOR
The RECEIVE MONITOR at the top of the
display indicates when data is being received on any
of the 16 MIDI channels: The dots corresponding to
each channel (1 … 16) flash briefly whenever any
data is received on the channel(s).
● CHANNEL
Use either the ▲ and ▼ LCD buttons to the left
of the display, or the CH LCD [▲/▼] control to
select the channel to which you want to assign a
mode or change a data switch setting. The channel
numbers are show in the leftmost column in the
display.
● MODE
The MODE LCD [▲/▼] controls select the receive mode for the currently selected channel. Any
of the following modes can be selected:
OFF

No data will be received on the selected channel.

MULTI

This is the “Multi-Timbre” mode in which the corresponding channel of the internal tone generator is directly controlled by the received MIDI data.

MIDI BASS

When the AUTO MIDI BASS or MANUAL MIDI BASS ABC accompaniment mode is selected
this receive mode can be selected to allow reception of bass note data from an external MIDI
bass pedal unit or other device.

PANEL CONTROL

When this mode is selected the received MIDI data controls the PSR-4000 panel operations
rather than playing the internal tone generator. Which panel operations are controlled by
which types of MIDI data are specified in the PANEL CONTROL display page, described
below.

KEYBOARD

This is the “normal” receive mode in which MIDI note data received by the PSR-4000 (A-1 …
C7) plays the corresponding notes in the same way as if they were played on the keyboard.
Pitch bend, modulation, expression, and sustain control data is also accepted. Program
change and main volume data affects the RIGHT 1 voice only.

● NOTE, CONTROL CHANGE, PROGRAM CHANGE, & PITCH
BEND SWITCH
These “switches” turn reception of the specified data type on or off. Use
the NOTE, CNTCNG, PRGCNG, and PITCHBND LCD [▲/▼] controls to turn
reception of the corresponding data on or off. A check mark appears in the
appropriate box when the corresponding switch is turned on.

120

F8: MIDI

NOTE

This switch turns reception of the note data on or off. When off, no notes will be produced by the
PSR-4000 even when note data is received on the selected channel.

CNTCNG

Turns reception of control change data on or off. Control change data includes modulation wheel, foot
controller, and any other controller data (except the pitch bend wheel, which has its own switch, below).

PRGCNG

Turns reception of program change data on or off. Program change data corresponds to voice or
“patch” numbers, and will select the corresponding voices on the PSR-4000 when the PRGCNG parameter is on.

PITCHBND

Turns reception of pitch bend wheel data on or off.

PANEL CONTROL
The parameters in this display page assign specific PSR-4000 panel controls to notes. The assigned notes
then control the corresponding panel control operations when received via a MIDI channel which is set to the
PANEL CONTROL receive mode in the RECEIVE display, above.

● OCTAVE
Use either the s and t LCD buttons to the left
of the display, or the OCT LCD [▲/▼] control to
select the octave in which you want to assign a note.
The selected octave appears between the s and t
LCD buttons to the left of the display. The “C” note
in octave “3” corresponds to C3 (middle C) on the
keyboard.
● NOTE
Use the NOTE LCD [▲/▼] control to select the
note to which you want to assign a panel control
function.
● TYPE SELECT & SUB
Use the TYPE SELECT LCD [▲/▼] controls to
assign a panel control function to the selected note.
The available panel control function types are listed
below along with the corresponding note-on (note
played) and note-off (note released) events for each
type. In some cases the SUB1 and SUB2 LCD [▲/
▼] controls are also used for type selection, as listed
below.

121

F8: MIDI

TYPE

Note-on event

Note-off event

1. OFF

None

2. SUSTAIN

SUSTAIN ON

SUSTAIN OFF

3. SOSTENUTO

SOSTENUTO ON

SOSTENUTO OFF

4. SOFT

SOFT ON

SOFT OFF

5. TAP TEMPO

TAP TEMPO ON

—

6. REGIST.+

REGISTRATION UP

—

7. REGIST.–

REGISTRATION DOWN

—

8. SYNCHRO START

[SYNCHRO START] ON

—

9. START/STOP

[START/STOP] ON

—

10. ROTARY SP

ROTARY SPEAKER
SLOW n FAST

11. HARMONY

HARMONY ON

HARMONY OFF

12. INTRO/FILLtoA

[INTRO/FILL to A] ON

[INTRO/FILL to A] RELEASED

13. INTRO/FILLtoB

[INTRO/FILL to B] ON

[INTRO/FILL to B] RELEASED

14. MAIN A

[MAIN A] ON

—

15. MAIN B

[MAIN B] ON

—

16. ENDING/rit.

[ENDING/rit.] ON

—

17. FADE IN/OUT

[FADE IN/OUT] ON

—

18. FINGERED1/2

Switch between
FINGERED 1 and 2

—

19. BASS HOLD

BASS HOLD ON

BASS HOLD OFF

20. PERCUSSION

PERCUSSION KEY ON
with velocity*

PERCUSSION KEY OFF.

21. ACCOMP. BREAK

ACCOMP. BREAK ON

ACCOMP. BREAK OFF

22. TEMPO +

TEMPO [+] ON

TEMPO [+] RELEASED

23. TEMPO –

TEMPO [–] ON

TEMPO [–] RELEASED

24. MULTI PAD

Specified MULTI PAD ON**

MULTI PAD RELEASED

25. CHORD

Enter specified chord***

Use SUB1 LCD [▲/▼] control to select PERCUSSION 1 or PERCUSSION 2. The PERCUSSION 1 and 2
voices are the same as those assigned to the footswitches — SW1 and SW2 — via the FOOT
CONTROLLER function display (page 104).

** Use SUB1 LCD [▲/▼] control to select MULTI PAD 1 … MULTI PAD 8.
*** Use SUB1 LCD [▲/▼] control to select chord root, and SUB2 LCD [▲/▼] control to select chord type.

122

Troubleshooting
Symptom
Noise is heard when the power is
turned on or off.

Possible Cause/Solution
This is a normal result of the power surge that occurs when the unit is
turned on or off. No solution necessary.
The volume controls or foot volume are turned all the way down.
Set the volume controls and foot volume to a reasonable listening
level.
Are the desired parts turned on?
A pair of headphones is plugged into the PHONES jack. Unplug the headphones.

No sound.

Is the FOOT SWITCH connected to the FOOT VOLUME connector?
The FADE OUT switch is on and has reached the end of its duration,
muting the sound. Press the FADE IN/OUT switch so that its indicator
goes out.
MIDI local control is turned OFF. Turn MIDI local control ON using F8
MIDI function.

The style list or voice list does not appear even when a style or voice group
button is pressed.

The [LIST HOLD] button is engaged (its LED is lit). Press the [LIST
HOLD] button so that its indicator goes out, then try selecting a style or
voice (page 11).

The style list, voice list or one touch
setting list does not automatically
disappear.

The [LIST HOLD] button is engaged (its LED is lit). Press the [LIST
HOLD] button so that its indicator goes out.

Pressing the SUSTAIN button on the
panel will not switch on the SUSTAIN
function.

The panel SUSTAIN button does not function when SUSTAIN is assigned
to the connected FOOT SWITCH. Disconnect the FOOT SWITCH or use
the FOOT SWITCH to control sustain.

The accompaniment does not start.

The MIDI CLOCK setting is set to EXTERNAL. Reset the MIDI CLOCK to
INTERNAL using F8 MIDI function.

Some notes do not sound or are prematurely cut off.

The maximum polyphony has been exceeded. You can play up to 32
notes at the same time—including auto-accompaniment, song memory,
multi pad notes etc.. Notes exceeding this limit will not sound. When using
ABC or HARMONY, be careful not to exceed the limit.

When a voice or style is changed, the
previously selected effect is changed or
the sound is prematurely cut off.

This is normal, each voice or style has its own suitable preset values.

There is a slight difference in sound
quality between notes played on the
keyboard.
Some voice’s have a looping sound.

This is normal and is a result of the PSR-4000’s sampling system.

Some noise or vibrato is noticeable in
higher pitches depending upon the voice.
Some voice’s will jump an octave in pitch
when playing up or down scales in the
upper or lower registers.
The ABC chord does not change even
when a different chord is played or the
chord is not recognized.

Some voice’s have a pitch limit which has been reached. This is normal.
Are you sure you’re playing on the left-hand section of the keyboard?
You are using single-finger type fingering in the fingered mode, or viceversa. Use the correct type of chord fingering for the selected ABC mode.
Is the ABC MODE set to MANUAL MIDI BASS?

The disk’s remaining memory value does
not coincide with the actual value.

The value is an approximate value.

When using a MIDI controller, effects do
not function as usual or not at all.

It will depend on the selected voice.

If any trouble other than what is listed
above occurs try the solution at the right.

Turn the power off and remove the AC cord from wall and then try to
change the backup batteries or take out the backup batteries and replace
them after approximately 1 minute.

123

Index
A
Accomp volume .............................. 26
Accompaniment ............................. 19

Copy (song track) ........................... 67

Foot switch ............................... 6, 104

Cursor .................... 44, 53, 69, 79, 82

Foot volume ............................. 7, 104

Custom accomp ............................. 69

Freeze (Registration) ............. 46, 114

Custom voice ................................. 78

Full edit ........................................... 82

Accompaniment director ........ 23 – 26

Full keyboard .................................. 21

Arabic ........................................... 100
Arranger ......................................... 30
Attack ................................. 80, 85, 86
Auto bass chord (ABC) .................. 19
Auto MIDI bass ......................... 21
Fingered 1/2 ............................. 20
Full keyboard ............................ 21
Manual MIDI bass .................... 21
Single finger ............................. 20
Auto mute ....................................... 26
Aux out ............................................. 6

Decay ................................. 80, 85, 86

Group ....................................... 14, 22

Delay vibrato .................................. 87
Delete ................................. 56, 59, 71
Demonstration .................................. 8

Depth .................................... 111, 112

Harmony ................................. 33, 114

Destination ............................... 76, 96

Headphones ..................................... 6

Direct setting ............................ 16, 27
Disk
Disklavier .................................. 47
DOC ......................................... 47

GM ............................................ 47

I
Individual (Foot volume) ............... 104
Individual load (Disk function) ........ 91
Initial touch ................................... 107

Bank (registration) .......................... 43

Disk button ..................................... 90

Bank select (MIDI) ........................ 115

Disk drive ........................... 47, 52, 90

Bass ................................... 19, 21, 30

Disk in use ........................................ 3

Batteries ........................................... 2

Drum kit .......................................... 15

Beet .......................................... 23, 71

Drum voice ..................................... 89

Brilliance ................................... 80, 86

DSP effect .............................. 34, 112

Dual voice ...................................... 82

Keyboard percussion ..................... 15

Chain .............................................. 49

Chord ............................................. 30

Easy edit ........................................ 79

LCD [▲/▼] control .................. 5, 9, 10

Chord assist ................................... 28

Easy setting .................................... 14

LCD button ............................. 5, 9, 10

Chord match ........................... 40, 103

Ending/rit ........................................ 25

LCD Contrast control ...................... 11

Chord pad ...................................... 38

Event .............................................. 76

Lead ............................................... 13

Chord root ...................................... 28

Exit button .................................. 9, 99

Left hold ......................................... 35

Chord step record .......................... 57

Expression ............................... 7, 104

Left orchestra ................................. 13

Initial touch curve ........................... 84
Intro/fill ...................................... 23, 25
Inversion ......................................... 29

Chord type ...................................... 28
Chorus .................................... 34, 112
Clear ................................... 77, 81, 88
Compare .................................. 79, 82
Controller ...................................... 104
Copy (custom accomp) .................. 75

List hold .......................................... 11

F
Fade in / out ................................... 26

Listen ...................................... 94 – 96
Load ............................................... 90

Fill ................................................. 25
Fingered 1/2 ................................... 20

First key .......................................... 64

Main A/B ......................................... 24
Main volume ................................... 15
Manual (song) ................................ 54

124

Index

Manual MIDI bass .......................... 21

Program change ........................... 115

Master volume .................................. 8

Punch in/out ................................... 63

Tap tempo ............................ 105, 122

Measure ......................................... 71
Memory ........................................ 115
Metronome ..................................... 54
MIDI .............................................. 116

Tempo ............................................ 22

Time ............................................. 115

Quantize ................................... 66, 75

Track .................................. 54, 60, 62

Mixer .............................................. 10

Modulation wheel ................... 35, 106

Registration .................................... 43

Multi pad ......................................... 36

Release .............................. 80, 85, 86

Multi pad mode select .................... 36

Repeat

Music stand ...................................... 7

Transpose ...................................... 17

O
Octave .............................. 14, 18, 101

One touch setting ........................... 31
Orchestra ....................................... 13

Type ............................................... 57

Reverb .................................... 34, 110

Undo ........................... 66 – 68, 75, 76

Rhythm ........................................... 30

Utility ............................................ 115

Right orchestra ............................... 13
Root ................................................ 57
Rotary speaker ..................... 105, 122

V
Voice .............................................. 14

S
Scale ............................................ 100
Section ..................................... 24, 69

Tune ............................................... 17

Resonance ............................... 80, 86

Off level ........................................ 107
Off set ........................................... 108

Trigger ............................................ 64

Chord pad ................................. 40
Demo .......................................... 9

Name ...................... 44, 53, 69, 79, 82

Time signature ............................... 71
Touch response ..................... 33, 107

Mix (song) ...................................... 67

W
Wave .............................................. 82

Sensitivity ..................................... 107
Single (Custom voice) .................... 82

Pad ................................................. 30

Single finger ................................... 20

Pan ......................................... 14, 101

Single play (demo) ........................... 9

Panel control ................................ 121

Soft pedal ..................................... 105

Parameter ............................ 111, 113

Song copy ...................................... 96

Part................................................. 13

Song play ....................................... 47

Part select ...................................... 14

Song record .................................... 52

Part tune ....................................... 100

Sostenuto ..................................... 105

Pause (song) .................................. 48

Source ...................................... 67, 96

Percussion ..................................... 41

Split point ......................... 16, 27, 102

Percussion pad .............................. 41

Start/stop .................................. 23, 25

Phrase ............................................ 30

Store ................................... 77, 81, 88

Phrase pad ............................. 36, 103

Style revoice ................................. 108

Pitch bend wheel .................... 35, 106

Sustain ................................... 33, 104

Power button .................................... 8

Synchro start .................................. 23

Preset ........................................... 115
Priority .......................................... 113

125

Voice List • Stimmenverzeichnis • Liste des voix • Lista de voces
RIGHT
Display BankSelect Program
Change
Voice Name
No. MSB LSB
No.
PIANO
1
0 112
0
GrandPiano 1
2
0 112
1
BrightPiano1
3
0
0
3
Honky-tonk
4
0
0
6
Harpsichord1
5
0
0
5
DX E.Piano
6
0
0
4
Funky E.P.
7
0 112
5
Dream E.P.
8
0 112
7
Clavi Wah
9
0
0
0
GrandPiano 2
10
0
0
1
BrightPiano2
11
0
0
2
MIDI Grand
12
0 112
6
Harpsichord2
13
0 112
4
E.Piano
14
0 113
4
Bell E.Piano
15
0 113
5
Ice E.Piano
16
0
0
7
Clavi.
ORGAN
1
0 112
16
Jazz Organ 1
2
0
0
16
Jazz Organ 2
3
0 112
18
Rock Organ 1
4
0 118
16
Bright Organ
5
0 115
17
ClickOrgan 1
6
0 118
17
ClickOrgan 2
7
0 119
16
ClickOrgan 3
8
0
0
19
Pipe Organ
9
0 116
16
Rock Organ 2
10
0
0
18
Rock Organ 3
11
0 113
17
Organ 16+2
12
0 114
17
Organ 16+4
13
0 115
16
Drawbar Org1
14
0 114
16
Drawbar Org2
15
0 119
17
Drawbar Org3
16
0 120
16
Drawbar Org4
17
0 117
16
Elec.Organ 1
18
0 117
17
Elec.Organ 2
19
0 113
16
Elec.Organ 3
20
0 112
17
Elec.Organ 4
21
0
0
17
Perc.Organ 1
22
0 116
17
Perc.Organ 2
23
0
0
20
Reed Organ
STRINGS/CHOIR
1
0 112
48
Strings 1
2
0
0
50
Syn.Strings1
3
0
0
88
Bell Strings
4
0
0
40
Violin
5
0 112
45
PizzStrings1
6
0
0
52
Choir Aahs
7
0 112
53
Choir Ooh 1
8
0 112
46
Harp 1
9
0
0
54
Synth Voice
10
0
0
48
Strings 2
11
0 113
48
Slow Strings
12
0
0
110
Fiddle
13
0
0
45
PizzStrings2
14
0 112
49
Chamber Str.
15
0
0
44
Tremolo Str.
16
0
0
51
Syn.Strings2
17
0
0
46
Harp 2
18
0
0
49
Strings 3
19
0 112
52
Big Choir

126

Display BankSelect Program
Change
Voice Name
No. MSB LSB
No.
20
0
0
53
Choir Ooh 2
21
0 112
54
Xenon Pad
22
0
0
55
OrchestraHit
23
0
0
41
Viola
24
0
0
42
Cello
SAX/WOODWIND
1
0 112
64
Soprano Sax1
2
0 112
65
Alto Sax 1
3
0 112
66
Tenor Sax 1
4
0 112
67
BaritoneSax1
5
0 112
73
Flute 1
6
0
0
75
Pan Flute
7
0
0
68
Oboe
8
0
0
71
Clarinet
9
0
0
64
Soprano Sax2
10
0
0
65
Alto Sax 2
11
0
0
66
Tenor Sax 2
12
0
0
67
BaritoneSax2
13
0
0
73
Flute 2
14
0
0
76
Blown Bottle
15
0
0
69
English Horn
16
0
0
70
Bassoon
17
0 113
65
Sax+Clarinet
18
0 113
66
Sax+Trombone
19
0
0
72
Piccolo
20
0
0
74
Recorder
21
0
0
79
Ocarina
22
0
0
82
Calliope
23
0
0
78
Whistle
24
0
0
77
Shakuhachi
TRUMPET/BRASS
1
0 113
56
Trumpet 1
2
0 112
59
MuteTrumpet1
3
0 114
56
Flugel Horn
4
0
0
57
Trombone 1
5
0
0
61
BrassSection
6
0 113
61
Brass+Tromb.
7
0
0
62
Synth Brass1
8
0
0
60
French Horn
9
0 112
56
Trumpet 2
10
0
0
56
Trumpet 3
11
0
0
59
MuteTrumpet2
12
0 113
57
Trombone 2
13
0
0
63
Synth Brass2
14
0 112
57
Trombone Sec
15
0 112
61
Brass+Sax
16
0 114
61
Brass+Trmpet
GUITAR/BASS
1
0
0
24
Nylon Guitar
2
0
0
25
Steel Guitar
3
0 112
25
12String Gtr
4
0
0
26
Jazz Guitar
5
0 112
27
Hawaiian Gtr
6
0
0
27
Clean Guitar
7
0
0
29
OverdriveGtr
8
0
0
28
Muted Guitar
9
0
0
30
DistortionGt
10
0
0
31
GtrHarmonics
11
0 112
26
Octave Gtr.
12
0
0
32
AcousticBass
13
0
0
33
FingeredBass

Display BankSelect Program
Change
Voice Name
No. MSB LSB
No.
14
0
0
34
Picked Bass
15
0
0
35
FretlessBass
16
0
0
43
Contrabass
17
0 112
36
Slap Bass 1
18
0
0
36
Slap Bass 2
19
0
0
37
Slap Bass 3
20
0 112
38
Techno Bass
21
0
0
38
Synth Bass 1
22
0
0
39
Synth Bass 2
23
0
0
58
Tuba
ACCORDION/WORLD
1
0 112
21
Trad.Accord.
2
0
0
21
Musette
3
0 112
23
TangoAccord.
4
0
0
23
Bandoneon
5
0
0
22
Harmonica
6
0
0
105
Banjo
7
0
0
109
Bagpipe
8
0
0
108
Kalimba
9
0 113
21
Soft Accord.
10
0 114
21
Small Accord
11
0 113
23
BrightAccord
12
0
0
107
Koto
13
0
0
106
Shamisen
14
0
0
104
Sitar
15
0
0
15
Dulcimer
16
0
0
111
Shanai
SYNTH/PAD
1
0 112
81
Analog Lead
2
0 112
80
Sub Aqua
3
0 113
81
RainHold
4
0 112
90
Dark Moon
5
0 112
82
70’s Lead
6
0 114
5
Synth EP
7
0
0
99
Atmosphere
8
0
0
91
Choir Pad
9
0 112
63
Reso.Brass
10
0 114
81
Reso.Saw
11
0
0
80
Square Lead
12
0
0
81
Saw. Lead
13
0
0
89
Warm Pad
14
0 112
91
Bell Pad
15
0
0
90
PolysynthPad
16
0 112
92
Cyber Pad
17
0
0
87
Bass & Lead
18
0
0
85
Voice Lead
19
0
0
84
Charang Lead
20
0
0
83
Chiff Lead
21
0
0
92
Bowed Pad
22
0
0
93
Metallic Pad
23
0
0
94
Halo Pad
24
0
0
86
Fifth Lead
SOUND EFFECT
1
0 112
95
Transform
2
0 112
101
Wave 2001
3
0 113
82
Dragon Flute
4
0
0
101
Goblins
5
0 112
98
QuackBell
6
0
0
100
Brightness
7
0
0
96
Rain
8
0
0
103
Sci-Fi

Voice List • Stimmenverzeichnis • Liste des voix • Lista de voces
LEFT
Display BankSelect Program
Change
Voice Name
No. MSB LSB
No.
9
0
0
97
Soundtrack
10
0
0
95
Sweep Pad
11
0
0
98
Crystal
12
0
0
102
Echoes
13
0
0
120
GtrFretNoise
14
0
0
121
Breath Noise
15
0
0
122
Seashore
16
0
0
123
Bird Tweet
17
0
0
124
Telephone
18
0
0
125
Helicopter
19
0
0
119
Rev.Cymbal
20
0
0
126
Applause
21
0
0
127
Gunshot
PERCUSSIVE
1
0 112
11
Vibraphone1
2
0
0
12
Marimba
3
0
0
13
Xylophone
4
0
0
114
Steel Drums
5
0
0
9
Glockenspiel
6
0
0
8
Celesta
7
0
0
14
TubularBells
8
0
0
47
Timpani
9
0
0
11
Vibraphone2
10
0
0
10
Music Box
11
0
0
112
Tinkle Bell
12
0
0
113
Agogo
13
0
0
115
Woodblock
14
0
0
116
Taiko Drum
15
0
0
117
Melodic Tom
16
0
0
118
Synth Drum
DRUM KIT
1
127
0
0
Standard Kit
2
127
0
8
Room Kit
3
127
0
16
Rock Kit
4
127
0
24
Electric Kit
5
127
0
25
Analog Kit
6
127
0
32
Jazz Kit
7
127
0
40
Brush Kit
8
127
0
48
Classic Kit

Display BankSelect Program
Change
Voice Name
No. MSB LSB
No.
PIANO/ORGAN
1
0 112
0
GrandPiano 1
2
0
0
6
Harpsichord1
3
0
0
5
DX E.Piano
4
0
0
4
Funky E.P.
5
0
0
16
Jazz Organ 2
6
0 114
17
Organ 16+4
7
0 112
18
Rock Organ 1
8
0
0
21
Musette
9
0
0
0
GrandPiano 2
10
0 112
1
BrightPiano1
11
0
0
1
BrightPiano2
12
0
0
3
Honky-tonk
13
0 112
6
Harpsichord2
14
0 112
7
Clavi Wah
15
0
0
7
Clavi.
16
0
0
2
MIDI Grand
17
0 112
4
E.Piano
18
0 112
5
Dream E.P.
19
0 113
4
Bell E.Piano
20
0 113
5
Ice E.Piano
21
0 112
16
Jazz Organ 1
22
0 116
16
Rock Organ 2
23
0 118
16
Bright Organ
24
0 115
17
ClickOrgan 1
25
0 118
17
ClickOrgan 2
26
0 112
17
ClickOrgan 3
27
0 119
16
ClickOrgan 4
28
0
0
18
Rock Organ 3
29
0 113
17
Organ 16+2
30
0 115
16
Drawbar Org1
31
0 114
16
Drawbar Org2
32
0 119
17
Drawbar Org3
33
0 120
16
Drawbar Org4
34
0 117
16
Elec.Organ 1
35
0 117
17
Elec.Organ 2
36
0 113
16
Elec.Organ 3
37
0
0
17
Perc.Organ 1
38
0 116
17
Perc.Organ 2
39
0
0
20
Reed Organ
40
0
0
19
Pipe Organ
41
0 112
21
Trad.Accord.
42
0
0
23
Bandoneon
43
0 112
23
TangoAccord.
44
0 113
21
Soft Accord.
45
0 114
21
Small Accord
46
0 113
23
BrightAccord
47
0
0
22
Harmonica
48
0
0
109
Bagpipe
STRINGS/CHOIR
1
0 112
48
Strings 1
2
0
0
50
Syn.Strings1
3
0
0
88
Bell Strings
4
0 112
54
Xenon Pad
5
0
0
52
Choir Aahs
6
0 112
53
Choir Ooh 1
7
0 112
52
Big Choir
8
0
0
54
Synth Voice
9
0
0
48
Strings 2
10
0
0
49
Strings 3
11
0 113
48
Slow Strings

Display BankSelect Program
Change
Voice Name
No. MSB LSB
No.
12
0 112
49
Chamber Str.
13
0
0
44
Tremolo Str.
14
0
0
51
Syn.Strings2
15
0 112
45
PizzStrings1
16
0
0
45
PizzStrings2
17
0
0
40
Violin
18
0
0
110
Fiddle
19
0
0
41
Viola
20
0
0
42
Cello
21
0 112
46
Harp 1
22
0
0
46
Harp 2
23
0
0
53
Choir Ooh 2
24
0
0
55
OrchestraHit
BRASS/WOODWIND
1
0
0
61
BrassSection
2
0 113
61
Brass+Tromb.
3
0
0
62
Synth Brass1
4
0
0
63
Synth Brass2
5
0
0
60
French Horn
6
0 112
61
Brass+Sax
7
0 114
61
Brass+Trmpet
8
0 113
66
Sax+Trombone
9
0 113
56
Trumpet 1
10
0 112
56
Trumpet 2
11
0 112
59
MuteTrumpet1
12
0
0
59
MuteTrumpet2
13
0 114
56
Flugel Horn
14
0
0
57
Trombone 1
15
0 113
57
Trombone 2
16
0 112
57
Trombone Sec
17
0 112
64
Soprano Sax1
18
0 112
65
Alto Sax 1
19
0 112
66
Tenor Sax 1
20
0 112
67
BaritoneSax1
21
0 112
73
Flute 1
22
0
0
75
Pan Flute
23
0
0
68
Oboe
24
0
0
71
Clarinet
25
0
0
64
Soprano Sax2
26
0
0
65
Alto Sax 2
27
0
0
66
Tenor Sax 2
28
0
0
73
Flute 2
29
0
0
76
Blown Bottle
30
0
0
69
English Horn
31
0
0
70
Bassoon
32
0 113
65
Sax+Clarinet
SYNTH/PAD
1
0 112
91
Bell Pad
2
0
0
89
Warm Pad
3
0 112
101
Wave 2001
4
0 113
82
Dragon Flute
5
0 112
90
Dark Moon
6
0 114
5
Synth EP
7
0
0
99
Atmosphere
8
0
0
91
Choir Pad
9
0 112
81
Analog Lead
10
0 112
80
Sub Aqua
11
0 113
81
RainHold
12
0 112
82
70’s Lead
13
0 112
63
Reso.Brass
14
0 114
81
Reso.Saw

127

Voice List • Stimmenverzeichnis • Liste des voix • Lista de voces
LEAD
Display BankSelect Program
Change
Voice Name
No. MSB LSB
No.
15
0
0
80
Square Lead
16
0
0
81
Saw. Lead
17
0 112
95
Transform
18
0
0
95
Sweep Pad
19
0
0
92
Bowed Pad
20
0
0
94
Halo Pad
21
0 112
92
Cyber Pad
22
0
0
90
PolysynthPad
23
0
0
101
Goblins
24
0
0
103
Sci-Fi
25
0
0
87
Bass & Lead
26
0
0
85
Voice Lead
27
0
0
83
Chiff Lead
28
0
0
100
Brightness
29
0
0
96
Rain
30
0
0
97
Soundtrack
31
0
0
102
Echoes
32
0 112
98
QuackBell
GUITAR/PERCUSSIVE
1
0
0
24
Nylon Guitar
2
0
0
25
Steel Guitar
3
0 112
25
12String Gtr
4
0
0
26
Jazz Guitar
5
0 112
27
Hawaiian Gtr
6
0
0
27
Clean Guitar
7
0
0
29
OverdriveGtr
8
0
0
30
DistortionGt
9
0 112
26
Octave Gtr.
10
0
0
28
Muted Guitar
11
0
0
32
AcousticBass
12
0
0
33
FingeredBass
13
0
0
34
Picked Bass
14
0
0
35
FretlessBass
15
0
0
43
Contrabass
16
0
0
58
Tuba
17
0 112
36
Slap Bass 1
18
0
0
36
Slap Bass 2
19
0
0
37
Slap Bass 3
20
0
0
38
Synth Bass 1
21
0
0
39
Synth Bass 2
22
0 112
38
Techno Bass
23
0
0
9
Glockenspiel
24
0
0
10
Music Box
25
0 112
11
Vibraphone1
26
0
0
11
Vibraphone2
27
0
0
12
Marimba
28
0
0
14
TubularBells
29
0
0
112
Tinkle Bell
30
0
0
13
Xylophone
31
0
0
108
Kalimba
32
0
0
105
Banjo

128

Display BankSelect Program
Change
Voice Name
No. MSB LSB
No.
TRUMPET/BRASS
1
0 127
56
Solo Trumpet
2
0 126
56
Mellow Trp.
3
0 127
59
Mute Trumpet
4
0 125
56
Flugel Horn
5
0 127
57
Trombone
6
0 126
57
SoftTrombone
7
0 127
61
BrassSection
8
0 127
63
Analog Brass
9
0 127
62
SynthBrass 1
10
0 126
62
SynthBrass 2
11
0 127
60
French Horn
12
0 126
63
Wah Brass
13
0 125
62
Brass Lead 1
14
0 125
63
Brass Lead 2
15
0 124
56
Soft Trumpet
16
0 127
58
Tuba
SAX/WOODWIND
1
0 127
64
Soprano Sax
2
0 127
65
Alto Sax
3
0 127
66
Tenor Sax
4
0 127
67
Baritone Sax
5
0 127
71
Clarinet
6
0 127
22
Harmonica
7
0 127
73
Flute
8
0 127
75
Panflute
9
0 127
68
Oboe
10
0 127
69
English Horn
11
0 127
70
Bassoon
12
0 126
66
Chorus Sax
13
0 127
72
Piccolo
14
0 127
78
Whistle
15
0 127
77
Shakuhachi
16
0 127
76
Blown Bottle
STRINGS/CHOIR
1
0 127
40
Violin
2
0 126
40
Soft Violin
3
0 125
40
Arco Violin
4
0 127
42
Cello
5
0 127
52
Choir Aah
6
0 127
53
Choir Ooh
7
0 126
52
Big Choir
8
0 127
54
Synth Voice
9
0 125
48
Violin Str.
10
0 127
110
Fiddle
11
0 127
41
Viola
12
0 127
43
Contrabass
13
0 127
48
Strings
14
0 127
50
Synth String
15
0 126
48
Slow Strings
16
0 126
54
Bell Voice

Display BankSelect Program
Change
Voice Name
No. MSB LSB
No.
GUITAR/BASS
1
0 127
24
Concert Gtr
2
0 127
25
Folk Guitar
3
0 126
25
12String Gtr
4
0 127
26
Jazz Guitar
5
0 124
27
Hawaiian Gtr
6
0 127
27
Clean Guitar
7
0 127
29
OverdriveGtr
8
0 125
27
Wah Guitar
9
0 126
26
OctaveGuitar
10
0 126
27
Tremolo Gtr
11
0 127
30
DistortionGt
12
0 126
30
Fuzz Guitar
13
0 127
36
Slap Bass 1
14
0 127
37
Slap Bass 2
15
0 127
32
Double Bass
16
0 127
39
Reso. Bass
SYNTH/PERCUSSIVE
1
0 125
81
Analog Lead
2
0 126
80
Sub Aqua
3
0 127
81
Saw. Lead
4
0 126
81
Reso. Saw.
5
0 126
82
70’s Lead
6
0 127
90
Dark Moon
7
0 127
80
Mini Lead
8
0 124
81
Big Lead
9
0 127
101
Wave 2001
10
0 123
81
Blowing Lead
11
0 127
82
Dragon Flute
12
0 122
81
Rain Hold
13
0 127
98
Quack Bell
14
0 124
63
Reso. Brass

Percussion Kit List • Verzeichnis der Schlagzeug- und Percussion-Sets
Liste des kits de percussion • Lista de juegos de percusión
Bank MSB#
Program #
Note#
Note
13
C#0
14
D0
15
D#0
16
E0
17
F0
18
F#0
19
G0
20
G#0
21
A0
22
A#0
23
B0
24
C1
25
C#1
26
D1
27
D#1
28
E1
29
F1
30
F#1
31
G1
32
G#1
33
A1
34
A#1
35
B1
36
C2
37
C#2
38
D2
39
D#2
40
E2
41
F2
42
F#2
43
G2
44
G#2
45
A2
46
A#2
47
B2
48
C3
49
C#3
50
D3
51
D#3
52
E3
53
F3
54
F#3
55
G3
56
G#3
57
A3
58
A#3
59
B3
60
C4
61
C#4
62
D4
63
D#4
64
E4
65
F4
66
F#4
67
G4
68
G#4
69
A4
70
A#4
71
B4
72
C5
73
C#5
74
D5
75
D#5
76
E5
77
F5
78
F#5
79
G5
80
G#5
81
A5
82
A#5
83
B5
84
C6

127
1
Standard Kit
SurdoMut
SurdoOpn
Hi Q
WhipSlap
ScraPush
ScraPull
FingSnap
Click
MetroClk
MetroBel
SeqClckL
SeqClckH
BrushTap
BrshSwlL
BrshSlap
BrshSwlH
SnareRol
Castanet
Snare L
Sticks
Kick L
Open Rim
Kick M
Kick H
SideStck
Snare M
HandClap
Snare H
F Tom L
C.Hi-Hat
F Tom H
P.Hi-Hat
Low Tom
O.Hi-Hat
MidTom L
MidTom H
CrashCy1
High Tom
RideCym1
ChineCym
Ride Cup
Tambourn
SplashCy
Cowbell
CrashCy2
Vibraslp
RideCym2
Bongo H
Bongo L
CongaMut
CongaOpn
Conga L
TimbaleH
TimbaleL
Agogo H
Agogo L
Cabasa
Maracas
SambaWhH
SambaWhL
GuiroSht
GuiroLng
Claves
WdBlockH
WdBlockL
CuicaMut
CuicaOpn
TrianglM
TrianglO
Shaker
JinglBel
BellTree

127
9
Room Kit
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
KickRoom
<——
<——
<——
<——
RoomTom1
<——
RoomTom2
<——
RoomTom3
<——
RoomTom4
RoomTom5
<——
RoomTom6
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

127
17
Rock Kit
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
SDRock M
<——
Kick M
<——
Kick H 3
KickRock
<——
SD Rock
<——
SDRokRim
RockTom1
<——
RockTom2
<——
RockTom3
<——
RockTom4
RockTom5
<——
RockTom6
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

127
25
Electro Kit
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
RevCymbl
<——
Hi Q
Snare M
<——
Kick H 4
<——
KickRock
KickGate
<——
SDRock L
<——
SDRock H
E Tom 1
<——
E Tom 2
<——
E Tom 3
<——
E Tom 4
E Tom 5
<——
E Tom 6
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
ScraPush
ScraPull
<——
<——
<——
<——
<——

127
26
Analog Kit
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
RevCymbl
<——
Hi Q
SDRock H
<——
Kick M
<——
KickAnaL
KickAnaH
A.SdeStk
AnaSD L
<——
AnSD H
AnaTom 1
AnaC.HH1
AnaTom 2
AnaC.HH2
AnaTom 3
Ana O.HH
AnaTom 4
AnaTom 5
AnaCymbl
AnaTom 6
<——
<——
<——
<——
<——
AnaCwbel
<——
<——
<——
<——
<——
AnaCongH
AnaCongM
AnaCongL
<——
<——
<——
<——
<——
AnaMarcs
<——
<——
<——
<——
AnaClavs
<——
<——
ScraPush
ScraPull
<——
<——
<——
<——
<——

127
33
Jazz Kit
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
KickJazz
<——
<——
<——
<——
JazzTom1
<——
JazzTom2
<——
JazzTom3
<——
JazzTom4
JazzTom5
<——
JazzTom6
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

127
41
Brush Kit
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
BrshSlpL
<——
<——
<——
<——
KickSoft
<——
BrshSlap
<——
BrushTap
BrshTom1
<——
BrshTom2
<——
BrshTom3
<——
BrshTom4
BrshTom5
<——
BrshTom6
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

127
49
Classic Kit
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
GranCasa
<——
<——
<——
<——
JazzTom1
<——
JazzTom2
<——
JazzTom3
<——
JazzTom4
JazzTom5
HndCymOL
JazzTom6
HndCymCL
<——
<——
<——
<——
<——
HndCymOH
<——
HndCymCH
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

* “<——” indicates the content is the same as that of Standard Kit.
* “<——” zeigt an, daß der Inhalt identisch mit dem Standardset ist.
* “<——” indique que le contenu est le même que celui du kit standard.
* “<——” indica que el contenido es el mismo que el del juego estándar.

129

Style List • Rhythmusverzeichnis • Liste des styles • Lista de estilos
Display No. Style Name
ROCK/ROCK’N’ROLL
1
Rock&Roll 1*
2
Twist
3
Hard Rock
4
Rock Shuffle
5
Slow Rock*
6
Org RkBallad*
7
LiteRkBallad*
8
Rock Pop
9
Rock&Roll 2*
10
BoogieWoogie
11
Speed Metal
12
Rock Ballad*
13
6/8 Heavy Rk
14
Upbeat Pop*
15
CowboyBoogie*
16
Jive*
POP/BEAT
1
16Beat Pop
2
8Beat Light*
3
Pop Shuffle
4
Up Pop Shfle*
5
Detroit Pop
6
Pop Rock*
7
Upbeat Pop*
8
Guitar Pop*
9
Pop Rhumba 1
10
Pop Rhumba 2
11
Light Pop*
12
Folk Rock*
13
Surf Shuffle
14
Disco Pop*
15
Dance Pop*
16
Party Pop 1*
BALLAD
1
8Beat Ballad
2
6/8 Ballad 1*
3
Epic Ballad
4
Slow Ballad
5
16Bt Ballad1*
6
16Bt Ballad2
7
16Bt Ballad3
8
Piano Ballad
9
8Beat Light*
10
6/8 Ballad 2
11
Slow Rock*
12
FusionBallad*
13
Rock Ballad*
14
Org RkBallad*
15
LiteRkBallad*
16
Cntry Ballad*
DANCE
1
Dance Pop*
2
Eurobeat
3
Dance Party
4
Pop Rap
5
Techno 1
6
Techno 2
7
Synth Boogie
8
Acid Jazz

130

Display No.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Style Name
DISCO
Disco Party
Disco Soul*
Disco Pop*
Disco Fox
Party Pop 1*
Party Pop 2
70s Disco
Disco Tropic
RHYTHM&BLUES
R&B
Funk
Soul
6/8 Blues*
6/8 Gospel
Gospel Waltz*
Disco Soul*
16Bt Ballad1*
JAZZ/SWING
Swing*
Big Band
BigBndBallad
Jazz Ballad
Cool Jazz
Uptempo Jazz
Swing Waltz*
Dixieland
Ragtime
Charleston
Gypsy Jazz
Fusion
Fusion Shfle
FusionBallad*
Jazz Waltz*
6/8 Blues*
LATIN
Pop Samba
Samba 1
Salsa
Bossa Fast
Pop Bossa
Beguine*
Pop Reggae
Merengue
Samba 2*
Reggae 16
Reggae 12
Bossa Slow
Mambo
Son
Bolero Lento
Espagnole

Display No. Style Name
COUNTRY&WESTERN
1
CountryRock1
2
CountryRock2
3
Bluegrass
4
Cntry Ballad*
5
CowboyBoogie*
6
Two Step
7
CountryShfle
8
Cntry Waltz1*
9
Cntry Waltz2*
10
Folk Rock*
11
Light Pop*
12
Up Pop Shfle*
13
Guitar Pop*
14
Pop Rock*
15
6/8 Ballad 1*
16
Rock&Roll 1*
MARCH/WALTZ
1
March 1
2
6/8 March 1
3
Trad. Waltz1*
4
Polka 1
5
Tarantella
6
Musette
7
Showtune
8
Polka Pop
9
March 2
10
6/8 March 2
11
Trad. Waltz2
12
Polka 2
13
Cntry Waltz1*
14
Cntry Waltz2*
15
Vienn.Waltz*
16
EnglishWaltz*
17
Jazz Waltz*
18
Swing Waltz*
19
Gospel Waltz*
BALLROOM
1
Vienn.Waltz*
2
EnglishWaltz*
3
Slowfox
4
Foxtrot
5
Quickstep
6
TangoArgent
7
Cha Cha
8
Rhumba
9
Samba 2*
10
Conga
11
Pasodoble
12
Jive
13
Rock&Roll 2*
14
Swing*
15
Beguine*
16
Trad. Waltz1*

* The styles with an asterisk (*) alonside appear in more than one group. They can be selected
from within any group.

Setup Parameters • Setup-Parameter
Paramètres de réglage général • Parámetros de ajuste
O : YES
X : NO

PANEL
LEAD VOICE
RIGHT1 VOICE
RIGHT2 VOICE
LEFT VOICE
RIGHT ORCHESTRA
PART SELECT
LEAD ON/OFF
RIGHT1 ON/OFF
RIGHT2 ON/OFF
LEFT ON/OFF
LEFT HOLD
HARMONY
SUSTAIN
TOUCH RESPONSE
REVERB
CHORUS
DSP EFFECT
REGISTRATION
NUMBER
BANK
FREEZE
STYLE
ACCOMP. DIRECTOR
FADE IN/OUT
INTRO A/FILL to A
INTRO B/FILL to B
MAIN A,MAIN B
ENDING/rit.
SYNCHRO START
ARRANGER
PHRASE
PAD
CHORD
BASS
RHYTHM
ABC
ONE TOUCH SETTING
MULTI PAD SELECT
TEMPO
LIST HOLD
SONG PLAY
SONG RECORD
CUSTOM VOICE EDIT
CUSTOM ACCOMP. REC
FUNCTION
DISK
MIXER
MAIN
LEAD
RIGHT1
RIGHT2
LEFT
ACCOMP.
MULTI PAD
SONG
ACCOMPANIMENT
PHRASE1
PHRASE2
PAD
CHORD1
CHORD2
BASS
RHYTHM1
RHYTHM2
TRANSPOSE
TUNE

REGISTRATION

REGISTRATION
FREEZE
group name

ONE TOUCH
SETTING

DISK DATA
group

MEMORY
BACK UP

RECALL
group name

FACTORY
PRESET

O
O
O
O
X

VOICE
VOICE
VOICE
VOICE
—

O
O
O
O
X

SETUP
SETUP
SETUP
SETUP
X

O
O
O
O
O

—
—
—
—
—

Tenor Sax
GrandPiano 1
Strings 1
Strings 1
R1

O
O
O
O
O
O
O
O
O
O
O

VOICE
VOICE
VOICE
VOICE
VOICE
HARMONY
VOICE
VOICE
EFFECTS
EFFECTS
EFFECTS

O
O
O
O
O
O
O
O
O
O
O

SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP

O
O
O
O
O
O
O
O
O
O
O

—
—
—
—
—
—
—
—
—
—
—

OFF
ON
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON

X
X
X
O

—
—
—
ACCOMP.

X
X
X
X

X
X
X
SETUP

X
X
O
O

—
—
—
—

—
1
OFF
Eurobeat

X
X
X
O
X
X

—
—
—
ACCOMP.
—
—

X
X
X
X
X
X

X
X
X
SETUP
X
X

X
X
X
O
X
X

—
—
—
—
—
—

OFF
OFF
OFF
MAIN A
OFF
OFF

O
O
O
O
O
O
X
O

ACCOMP.
ACCOMP.
ACCOMP.
ACCOMP.
ACCOMP.
ACCOMP.
—
MULTI PAD

O
O
O
O
O
O
X
X

SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
X
SETUP

O
O
O
O
O
O
X
O

—
—
—
—
—
—
—
—

O
X
X
X
X
X
X
X

TEMPO
—
—
—
—
—
—
—

O
X
X
X
X
X
X
X

SETUP
X
X
X
X
X
X
X

O
X
X
X
X
X
X
X

—
—
—
—
—
—
—
—

ON
ON
ON
ON
ON
ON
—
PHRASE/
CHORD
122
OFF
OFF
OFF
OFF
OFF
OFF
OFF

O
O
O
O
O
O
O

VOICE
VOICE
VOICE
VOICE
ACCOMP.
MULTI PAD
SONG

O
O
O
O
O
X
X

SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP

O
O
O
O
O
O
O

X
X
X
X
X
X
X

100
80
80
60
100
100
100

O
O
O
O
O
O
O
O
O
X

ACCOMP.
ACCOMP.
ACCOMP.
ACCOMP.
ACCOMP.
ACCOMP.
ACCOMP.
ACCOMP.
TRANSPOSE
—

O
O
O
O
O
O
O
O
X
X

SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP

O
O
O
O
O
O
O
O
O
O

X
X
X
X
X
X
X
X
X
X

100
100
100
100
100
100
100
100
0
440.0Hz

131

Setup Parameters • Setup-Parameter • Paramètres de réglage général • Parámetros de ajuste

O.T.S.
NUMBER for each style
TEMPO SET ON/OFF
F1
SCALE
SCALE

REGISTRATION
FREEZE
group name

ONE TOUCH
SETTING

DISK DATA
group

MEMORY
BACK UP

RECALL
group name

FACTORY
PRESET

X
X

—
—

X
X

SETUP
SETUP

O
O

X
X

1
ON

SCALE

SETUP

O
O
O
O
O
O
O
O
O
O
O
O

SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE

O
O
O
O
O
O
O
O
O
O
O
O

SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP

O
O
O
O
O
O
O
O
O
O
O
O

SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE
SCALE

EQUAL TEMPERAMENT
0
0
0
0
-50
0
0
0
0
0
0
-50

TUNE (NOTE:C)
TUNE (NOTE:Db)
TUNE (NOTE:D)
TUNE (NOTE:Eb)
TUNE (NOTE:E)
TUNE (NOTE:F)
TUNE (NOTE:F#)
TUNE (NOTE:G)
TUNE (NOTE:Ab)
TUNE (NOTE:A)
TUNE (NOTE:Bb)
TUNE (NOTE:B)
VOICE PART
PART TUNE MODE
TUNE (LEAD)
TUNE (RIGHT1)
TUNE (RIGHT2)
TUNE (LEFT)
OCTAVE (LEAD)
OCTAVE (RIGHT1)
OCTAVE (RIGHT2)
OCTAVE (LEFT)
PAN (LEAD)
PAN (RIGHT1)
PAN (RIGHT2)
PAN (LEFT)
F2
SPLIT POINT (ABC)
SPLIT POINT (LEFT)
ABC MODE
AUTO MUTE
MANUAL MIDI BASS VOICE
M.PAD REPEAT

O
O
O
O
O
O
O
O
O
O
O
O
O

VOICE
VOICE
VOICE
VOICE
VOICE
VOICE
VOICE
VOICE
VOICE
VOICE
VOICE
VOICE
VOICE

O
O
O
O
O
O
O
O
O
O
O
O
O

SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP

O
O
O
O
O
O
O
O
O
O
O
O
O

X
X
X
X
X
X
X
X
X
X
X
X
X

AUTO
+3cent
0cent
-3cent
0cent
0
0
0
0
CENTER
CENTER
CENTER
CENTER

O
O
O
O
O
O

ACCOMP.
VOICE
ACCOMP.
ACCOMP.
ACCOMP.
MULTI PAD

O
O
X
X
X
X

SETUP
SETUP
SETUP
SETUP
SETUP
SETUP

O
O
O
O
O
O

X
X
X
X
X
X

M.PAD CODE MATCH

MULTI PAD

SETUP

F#2/G2
F#2/G2
FINGERED 1
ON
AcousticBass
PHRASE: OFF,
CHORD: ON
M.PAD1/2:OFF,
M.PAD3/4:ON

O
O
O
O

CONTROLLER
CONTROLLER
CONTROLLER
CONTROLLER

X
X
X
O

SETUP
SETUP
SETUP
SETUP

O
O
O
O

X
X
X
X

MASTER
ALL ON
SUSTAIN
ALL ON

CONTROLLER

SETUP

ALL ON

CONTROLLER

SETUP

ALL ON

CONTROLLER

SETUP

O
O

CONTROLLER
CONTROLLER

X
X

SETUP
SETUP

O
O

X
X

CONTROLLER

SETUP

01 STANDARD KIT/
37 CrashCy1
ROTARY SP
01 STANDARD KIT/
24 Kick H
ALL ON

CONTROLLER

SETUP

ALL ON

O
O
O

CONTROLLER
CONTROLLER
CONTROLLER

O
O
O

SETUP
SETUP
SETUP

O
O
O

X
X
X

NORMAL
ALL ON
64

F3
FOOT VOLUME TYPE
FOOT VOLUME ASSIGN
FOOT SW1 TYPE
SUSTAIN ASSIGN for
FOOT SW1/2,
SUSTAIN BUTTON
SOSTENUTO ASSIGN for
FOOT SW1/2
SOFT ASSIGN for
FOOT SW1/2
PERCUSSION for
FOOT SW1
FOOT SW2 TYPE
PERCUSSION for
FOOT SW2
PITCH BEND WHEEL
ASSIGN
MODULATION WHEEL
ASSIGN
INITIAL TOUCH SENS.
INITIAL TOUCH ASSIGN
INITIAL TOUCH OFF LEVEL

132

REGISTRATION

Setup Parameters • Setup-Parameter • Paramètres de réglage général • Parámetros de ajuste

F5
REVERB DEPTH
(LEAD,R1,R2,LEFT)
REVERB DEPTH
(ACMP/SONG)
REVERB DEPTH (M.PAD)
REVERB TYPE
REVERB PARAMETER 1~5
CHORUS DEPTH
(LEAD, R1, R2, LEFT,
ACMP, M.PAD)
EFFECT PRIORITY
EFFECT DEPTH
(LEAD, R2,LEFT,
ACMP,M.PAD)
EFFECT DEPTH (RIGHT1)
EFFECT TYPE
EFFECT PARAMETER 1~5
F6
HARMONY TYPE
HARMONY VOLUME
REGISTRATION NAME
REGISTRATION FREEZE
GROUP
F7
MEMORY BACK UP
DISPLAY- MIDI BANK SEL. &
PROG. CHANGE #
TIME OUT (LIST,MESSAGE)
F8
LOCAL CONTROL
(LEAD, R1, R2, LEFT,
ACMP, M.PAD)
CLOCK
TRANSPOSE TRANSMIT
TRANSPOSE RECEIVE
START/STOP TRANS.
START/STOP RECEIVE
EXCLUSIVE TRANS.
EXCLUSIVE RECEIVE
TRNS. CH1 PART,SWITCH
TRNS. CH2 PART,SWITCH
TRNS. CH3 PART,SWITCH
TRNS. CH4 PART,SWITCH
TRNS. CH5~16 PART,SWITCH
RECEIVE CH1~16
MODE, SWITCH
PANEL CONTROL

REGISTRATION

REGISTRATION
FREEZE
group name

ONE TOUCH
SETTING

DISK DATA
group

MEMORY
BACK UP

RECALL
group name

FACTORY
PRESET

VOICE

SETUP

ALL PARTS 50

ACCOMP.

SETUP

O
O
O
O

MULTI PAD
EFFECTS
EFFECTS
VOICE

O
X
X
O

SETUP
SETUP
SETUP
SETUP

O
O
O
O

X
X
X
X

50
HALL 1
TYPE default
ALL PARTS 50

O
O

EFFECTS
EFFECTS

O
O

SETUP
SETUP

O
O

X
X

RIGHT1
0

O
O
O

EFFECTS
EFFECTS
EFFECTS

O
O
O

SETUP
SETUP
SETUP

O
O
O

X
X
X

33
Stage 2
TYPE default

O
O
O
X

HARMONY
HARMONY
—
—

O
O
O
X

SETUP
SETUP
REGISTRATION
SETUP

O
O
O
O

X
X
X
X

2 Trio
50
Registration
ACCOMP,
TEMPO:ON,
OTHERS:OFF

X
X

—
—

X
X

—
SETUP

O*2
O

X
X

OFF
OFF

—

SETUP

—

SETUP

ALL PARTS ON

X
X
X
X
X
X
X
X
X
X
X
X
X

—
—
—
—
—
—

X
X
X
X
X
X
X
X
X
X
X
X
X

SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP

O
O
O
O
O
O
O
O
O
O
O
O
O

X
X
X
X
X
X
X
X
X
X
X
X
X

INTERNAL
OFF
ON
ON
ON
ON
ON
LEAD,ALL ON
RIGHT1,ON
RIGHT2,ON
LEFT,ON
OFF,ALL OFF
MULTI,ALL ON

SETUP

—
default
(some of preset)
default
(some of preset)
default (1data)
default data
default (preset)

DATA
SONG
CUSTOM STYLE

X
X

—
—

X
X

(DISK DIRECT)
CUSTOM STYLE

X
O*2

—
X

CUSTOM VOICE

—

CUSTOM VOICE

O*2

REGISTRATION
MULTI PAD
F4 STYLE REVOICE

—
X
X

—
—

X
X
X

REGISTRATION
MULTI PAD
STYLE REVOICE

O*2
O*2
O*2

X
MULTI PAD
STYLE REVOICE

*1 MIDI PANEL CONTROL default
NOTE C-2 ~ B0, Db2 ~ G8 :OFF
NOTE C1 :START/STOP
Db1
Eb1 :ENDING/rit.
E1
F#1 :ROTARY SP
G1
A1 :CHD F7
Bb1
C2 :FADE IN/OUT

:INTRO/FILL A
:REGIST+
:HARMONY
:CHD G

D1
F1
Ab1
B1

:INTRO/FILL B
:REGIST:CHD C
:CHD G7

*2 This data is backed up irrespective of F7 BACK UP=ON /OFF.

133

Fingering Chart • Akkordliste • Tablature • Gráfica de digitado
• Noten in Klammern ( ) können ausgelassen werden.
• Mit einem Sternchenzeichen (*) versehene Akkorde können in
jeder Umkehrung gespielt werden (d.h. der Grundton muß nicht
die tiefste angeschlagene Note sein).
• Wenn Sie drei nebeneinanderliegende Tasten (weiße und
schwarze Tasten) anschlagen, wird die Akkordbegleitung unterdrückt, so daß lediglich der Rhythmus zu hören ist.
• Überlegen Sie sich bitte vor dem Spielen eines Stücks, welche
Akkorde gebraucht werden. Bei Akkorden, die mit einem “●”
gekennzeichnet sind, ist unter Umständen eine Verlagerung des
Splitpunkts vorteilhaft, um das Greifen dieser Akkorde zu
erleichtern.

D#
(Eb)

D#6
(Eb 6 )

F#
(Gb)

F#6
(Gb 6 )

G#
(Ab)

G# 6
(Ab 6 )

A#
(Bb)

A #6
(Bb6 )

(

)

C# M 7 (#11)
(Db M 7 (#11) )

(

)

C# M 7
(Db M 7)

(

)

C# 6
(Db 6 )

)

C#
(Db)

CM 7 (#11)

CM 7

(

C6
)

Major seventh*
Dur-Akkord mit großer
Septime*
Majeure septième*
Mayor de séptima*

)

Sixth
Dur-Akkord mit
hinzugefügter Sexte
Sixte
Sexta

Major*
Dur*
Majeur*
Mayor*

Major seventh sharp eleventh*
Dur-Akkord mit großer Septime
und übermäßiger Undezime*
Septième majeure onzième
dièse*
Mayor de séptima y onceava
sostenida*

(

• Notes in parentheses ( ) can be omitted.
• Chord types marked with an asterisk (*) can be played in any
inversion (i.e. the root does not have to be the lowest note in the
chord).
• If you play any three adjacent keys (including black keys), the
chord sound will be canceled and only the rhythm instruments will
continue playing (CHORD CANCEL function).
• Please determine which chords you are going to use before
playing a song. In the case of chords marked with a “●” it may be
necessary to shift the split to allow easy fingering.

DM 7 (#11)
)

(

)

D #M 7 (#11)
(Eb M 7 (#11) )

(

)

D #M 7
(Eb M 7)

(

)

(

)

DM 7

EM 7 (#11)
)

(

)

FM 7 (#11)
)
(

GM 7 (#11)
)
)

(

)
(
)

(

)

G# M 7 (#11)
(Ab M 7 (#11))

(

)

GM 7

G# M 7
(Ab M 7)

)

F #M 7 (#11)
(Gb M 7 (#11))

(

)

F #M 7
(Gb M 7)

(

)

FM 7

(

)

EM 7

AM 7 (#11)
)

134

)

BM 7 (#11)

(

BM 7

)

(

)

A #M 7 (#11)
(Bb M 7 (#11))

(

)

(

)

A #M 7
(Bb M 7)

)

(

)

(

)

AM 7

Fingering Chart • Akkordliste • Tablature • Gráfica de digitado

• Les notes entre parenthèses ( ) peuvent être omises.
• Les accords marqués d’un astérisque (*) peuvent être joués dans
n’importe qu’elle inversion (il n’est pas nécessaire que la note
fondamentale de l’accord soit la note la plus basse).
• Si vous jouez trois touches adjacentes (y compris les touches
noires), le son de la partie accords sera annulé et seuls les instruments rythmiques continueront à jouer (fonction CHORD
CANCEL, annulation d’accord).
• Veuillez déterminer quels accords que vous allez utiliser avant de
commencer l’exécution d’un morceau. Dans le cas des accords
marqués par “●”, il peut s’avérer nécessaire de déplacer le point
de partage pour faciliter l’exécution.

• Las notas entre paréntesis ( ) pueden omitirse.
• Los tipos de acordes marcados con un asterisco (*) pueden
reproducirse en cualquier inversión (es decir, la nota fundamental
no tiene por qué ser la nota más baja del acorde).
• Si se tocan simultáneamente tres teclas adyacentes (incluyendo
teclas negras), se cancelará el sonido del acorde y sólo seguirán
sonando los instrumentos rítmicos (función CHROD CANCEL).
• Determine los acordes que se proponga utilizar antes de
reproducir una canción. En el caso de los acordes marcados con
“●” puede resultar necesario desplazar la división para permitir
un digitado más fácil.

Major seventh ninth*
Dur-Akkord mit großer
Septime und None*
Neuvième sur septième
majeure*
Mayor de séptima y novena*

F #add9
(Gb add 9)

F #M 7 (9)
(Gb M 7 (9))

Gadd9

GM 7 (9)

G# add 9
(Ab add 9)

G# M 7 (9)
(Ab M 7 (9))

Aadd 9

AM 7 (9)

A #add 9
(Bb add 9)

A #M 7 (9)
(Bb M 7 (9))

Badd9

BM 7 (9)

(

(
)
(

)
(

)
(
)
(

)

)
(

(

Faug
)
(

(

)

F 6 (9)

(

)

F # 6 (9)
(Gb 6 (9) )

F #aug
(Gb aug)

Gaug
)
(

(

)

G 6 (9)

(

)

G# 6 (9)
(Ab 6 (9) )

G# aug
(Ab aug)

Aaug
)
(

)
(

A #aug
(Bb aug)
(

A # 6 (9)
(Bb 6 (9) )

(

)

(

)

A 6 (9)

)

FM 7 (9)

B 6 (9)

)

Fadd9

Eaug

E 6 (9)

Baug

(

EM 7 (9)

D #aug
(Eb aug)

)

Eadd9

D # 6 (9)
(Eb 6 (9) )

(

D #M 7 (9)
(Eb M 7 (9))

Daug

D 6 (9)

)

D #add 9
(Eb add9 )

C# aug
(Db aug)

(

DM 7 (9)

)

Dadd 9

C# 6 (9)
(Db 6 (9) )

)

C# M 7 (9)
(Db M 7 (9))

(

C# add9
(Db add 9 )

Augmented
Übermäßig
Augmenté
Aumentada
Caug

C 6 (9)

)

CM 7 (9)
)

Cadd 9

(

Added ninth*
Hinzugefügte None*
Neuvième ajoutée*
Novena añadida*

Six ninth
Dur-Akkord mit Sexte
und None
Neuvième sur sixte
majeure
Sexta y novena

135

Fingering Chart • Akkordliste • Tablature • Gráfica de digitado

Minor sixth
Moll-Akkord mit
hinzugefügter Sexte
Mineure sixte
Menor de sexta

Minor*
Moll*
Mineur*
Menor*

Minor seventh
Moll-Septakkord
Mineure septième
Menor de séptima

Cm 6

Cm 7

C# m
(Db m)

C# m 6
(Db m 6)

C# m 7
(Db m 7)

Dm 6

Dm 7

D #m
(Eb m)

D #m 6
(Eb m 6)

D #m 7
(Eb m 7)

Em 6

Em 7

Fm 6

Fm 7

F #m
(Gb m)

F #m 6
(Gb m 6)

F #m 7
(Gb m 7)

Gm 6

Gm 7

G# m
(Ab m)

G# m 6
(Ab m 6)

G# m 7
(Ab m 7)

Am 6

Am 7

A #m
(Bb m)

A #m 6
(Bb m 6)

A #m 7
(Bb m 7)

Bm 6

Bm 7

Cm 7 (b5)
(

)

Minor seventh flatted fifth
Moll-Septakkord mit
verminderter Quinte
Quinte diminuée sur
mineure septième
Menor de séptima y quinta
bemol

(

)

C# m 7 (b5)
(Db m 7 (b5))

(

)

Dm 7 (b5)

(

)

D #m 7 (b5)
(Eb m 7 (b5))

(

)

Em 7 (b5)

(

)

Fm 7 (b5)

(

)

F #m 7 (b5)
(Gb m 7 (b5) )

(

)

Gm 7 (b5)

(

)

G# m 7 (b5)
(Ab m 7 (b5) )

A #m 7 (b5)
(Bb m 7 (b5) )

136

(

)

(

)

(

)

Am 7 (b5)

Bm 7 (b5)

Fingering Chart • Akkordliste • Tablature • Gráfica de digitado

C# m (9)
(Db m (9))

C# m 7 (9)
(Db m 7 (9))

Dm (9)

Dm 7 (9)

D #m (9)
(Eb m (9))

D #m 7 (9)
(Eb m 7 (9))

Em (9)

Em 7 (9)

Fm (9)

Fm 7 (9)

F #m (9)
(Gb m (9))

F #m 7 (9)
(Gb m 7 (9))

Gm (9)

Gm 7 (9)

G# m (9)
(Ab m (9))

G# m 7 (9)
(Ab m 7 (9))

Am (9)

Am 7 (9)

A #m (9)
(Bb m (9))

A #m 7 (9)
(Bb m 7 (9))

Bm (9)

Bm 7 (9)

Cm 7 (11)

CmM 7
)

)

(

)

C# mM7
(Db mM 7 )

(

)

(

(
(

)

C# m 7 (11)
(Db m 7 (11) )

)

Cm 7 (9)

(

Cm (9)

Minor major seventh*
Moll-Akkord mit großer
Septime*
Septième majeure sur
mineur*
Menor mayor de séptima*

(

Minor seventh ninth*
Moll-Septakkord mit None*
Neuvième sur septième
mineure*
Menor de séptima y novena*

)

Minor added ninth*
Moll-Septakkord mit
hinzugefügter None*
Neuvième sur mineure*
Menor de novena añadida*

Minor seventh eleventh
Moll-Septakkord mit
Unidezime
Onzième sur septième
mineure
Menor de séptima y
onceava

)
(
)

)
(
(

)

D #mM 7
(Eb mM 7)

(

)

(

)

D #m 7 (11)
(Eb m 7 (11))

(

)

DmM 7
(

(

)

Dm 7 (11)

)

EmM7
(

(

)

(

Em 7 (11)

FmM7
)
)

(
)

(

)

F #mM7
(Gb mM7 )

(

)

F #m 7 (11)
(Gb m 7 (11) )

(

)

(

)

Fm 7 (11)

)
(
)
)

(

)

(
)

BmM7

)

)
(

Bm 7 (11)

(

)
(

(

)
(

)

A #mM 7
(Bb mM 7 )

(

)
(

AmM 7

(

A #m 7 (11)
(Bb m 7 (11) )

(

)

(

)

Am 7 (11)

)

G# mM 7
(Ab mM 7 )

(

)
(
)
(

)
(
)

(

)

G# m 7 (11)
(Ab m 7 (11) )

GmM7

(

)

Gm 7 (11)

137

Fingering Chart • Akkordliste • Tablature • Gráfica de digitado

Minor major seventh ninth*
Moll-Akkord mit großer
Septime und None*
Neuvième sur septième
majeure sur mineur*
Menor mayor de séptima y
novena*

Diminished seventh
Verminderter Septakkord
Septième diminuée
Séptima disminuida

Seventh*
Septakkord*
Septième*
Séptima*

Cdim

Cdim 7

C# dim
(Db dim)

C# dim 7
(Db dim 7)

C#7
(Db7)

Ddim

Ddim 7

D #dim
(Eb dim)

D #dim 7
(Eb dim 7)

D #7
(Eb7)

Edim

Edim 7

Fdim

Fdim 7

F #dim
(Gb dim)

F #dim 7
(Gb dim 7)

F# 7
(Gb7)

Gdim

Gdim 7

G# dim
(Ab dim)

G# dim 7
(Ab dim 7 )

G# 7
(Ab7)

Adim

Adim 7

A #dim
(Bb dim)

A #dim 7
(Bb dim 7)

A #7
(Bb7)

Bdim

Bdim 7

138

)

)
)
)
)
(

)
(

BmM7 (9)

(

A #mM 7 (9)
(Bb mM 7 (9) )

)

(

)

AmM 7(9)

(

G# mM 7 (9)
(Ab mM 7 (9) )

)

(

)

GmM7(9)

(

)

(

)

FmM7 (9)

F #mM7 (9)
(Gb mM7 (9) )

)
(

(

)

EmM7 (9)

(

)
(

D #mM 7(9)
(Eb mM 7(9) )

(

)

DmM 7(9)

(

C# mM7 (9)
(Db mM 7(9) )

)

(

)

CmM 7 (9)

Diminished*
Vermindert*
Diminué*
Disminuida*

Fingering Chart • Akkordliste • Tablature • Gráfica de digitado

Seventh ninth*
Dur-Septakkord mit
None*
Neuvième sur septième*
Séptima y novena*

F 7 (9)

F # 7 (b5)
(Gb7(b5) )

F # 7 (9)
(Gb7 (9) )

G 7 (b5)

G 7 (9)

G# 7 (b5)
(Ab7(b5) )

G# 7 (9)
(Ab 7 (9) )

A 7 (b5)

A 7 (9)

A # 7 (b5)
(Bb7 (b5))

A # 7 (9)
(Bb 7 (9) )

B 7 (b5)

B 7 (9)

)
)

)
(
)

)
(
(

(

)

F 7 (#11)

(

)

F # 7 (#11)
(Gb7 (#11))

(

)

G 7 (#11)

(

)

G# 7 (#11)
(Ab 7 (#11))

)

A 7 (#11)
(

(
)

(

)

A # 7 (#11)
(Bb 7 (#11))

(

B7 sus 4

)

(

)

(

)

A 7 sus 4

A #7sus 4
(Bb7 sus4 )

(

(
(

)

(

)

G7 sus 4

G#7 sus 4
(Ab7 sus 4)

(
)
(

)
(
)
(

F #7 sus 4
(Gb7 sus 4 )

(
)
(

(

F 7 sus 4

)

F 7 (b5)

E 7 (#11)

B 7 (#11)

)

E 7 (9)

(

E 7 (b5)
)

E7 sus 4

D # 7 (#11)
(Eb 7 (#11) )

)

D # 7 (9)
(Eb 7 (9))

(

D # 7 (b5)
(Eb7 (b5))

(
)
(

D #7 sus 4
(Eb 7 sus 4)

D 7 (#11)

)

D 7 (9)

(

D 7(b5)
)

D7 sus 4

C#7 (#11)
(Db7 (#11) )

)

C#7 (9)
(Db7 (9))

(

C #7 (b5)
(Db7(b5))

(
)
(

C# 7 sus 4
(Db 7 sus 4)

C 7 (#11)

)

C 7 (9)

Seventh sharp eleventh*
Dur-Septakkord mit
übermäßiger Unidezime*
Septième onzième dièse*
Séptima y onceava
sostenida*

)

C 7(b5)
)

C7 sus 4

Seventh flatted fifth
Dur-Septakkord mit
verminderter Quinte
Quinte diminuée en
septième
Séptima y quinta bemol

(

Seventh suspended fourth
Dur-Septakkord mit
vorgehaltener Quarte
Quarte sur septième sensible
Séptima y cuarta suspendida

139

Fingering Chart • Akkordliste • Tablature • Gráfica de digitado

Seventh flatted ninth*
Dur-Septakkord mit
verminderter None*
Neuvième diminuée en
septième*
Séptima y novena bemol*

D 7(#9)

D # 7 (b13)
(Eb 7 (b13) )

D # 7 (#9)
(Eb7 (#9))

E 7 (b13)

E 7 (#9)

F 7 (b13)

F 7 (#9)

F # 7 (b13)
(Gb7 (b13))

F # 7 (#9)
(Gb7(#9) )

G 7 (b13)

G 7 (#9)

G# 7 (b13)
(Ab 7 (b13))

G# 7 (#9)
(Ab7(#9) )

A 7 (b13)

A 7 (#9)

A # 7 (b13)
(Bb 7 (b13))

A # 7 (#9)
(Bb7 (#9))

B 7 (b13)

B 7 (#9)

(

)
(
)
(
)
(
)
(
)
)
(
)

(
)
(

)
(

(

)
(

)

(

)

B 7 (b9)

)
)
(

(
)
(

A 7 (b9)

A # 7 (b9)
(Bb7 (b9))

)
)
(

)
(
)
(
)

)
(
(

)

G# 7 (b9)
(Ab7(b9) )

(

(
)
(
)

G 7 (b9)

(

140

D 7 (b13)

(
)
(
(

)

F # 7 (b9)
(Gb7(b9) )

A 7 (13)

B 7 (13)

C #7 (#9)
(Db7(#9))

)

)
(

F 7 (b9)

G 7 (13)

A # 7 (13)
(Bb 7 (13))

(

E 7 (b9)

F 7 (13)

G# 7 (13)
(Ab 7 (13))

C#7 (b13)
(Db7 (b13) )

)

)
(
(

)

D # 7 (b9)
(Eb7 (b9))

E 7 (13)

F # 7 (13)
(Gb7 (13))

(

D 7(b9)

D 7 (13)

D # 7 (13)
(Eb 7 (13) )

C 7(#9)

)

)
(
)

C #7 (b9)
(Db7(b9))

(

C#7 (13)
(Db7 (13) )

C 7 (b13)

)

C 7(b9)

C 7 (13)

Seventh sharp ninth*
Dur-Septakkord mit
übermäßiger None*
Neuvième dièse sur
septième*
Séptima y novena
sostenida*

(

Seventh added thirteenth*
Dur-Septakkord mit
hinzugefügter Tredezime*
Treizième ajoutée sur septième*
Séptima y decimotercera
añadida*

Seventh added flatted thirteenth*
Dur-Septakkord mit
hinzugefügter verminderter
Tredezime*
Treizième diminuée ajoutée
sur septième*
Séptima y decimotercera
bemol añadida*

Fingering Chart • Akkordliste • Tablature • Gráfica de digitado

Major seventh augmented*
Dur-Akkord mit großer
Septime und übermäßiger
Quinte*
Quinte sur septième
majeure augmentée*
Mayor de séptima y quinta
aumentada*

Suspended fourth
Vorgehaltene Quarte
Quarte sur sensible
Cuarta suspendida

One plus two plus five
Eines plus Zwei plus Fünf
Un + deux + cinq
Uno más dos más cinco

C 7 aug

Csus 4

C1+2+5

C# 7 aug
(Db 7 aug)

C# sus 4
(Db sus 4)

C# 1+2+5
(Db 1+2+5)

D 7 aug

Dsus 4

D1+2+5

D # 7 aug
(Eb 7 aug)

D #sus 4
(Eb sus 4)

D #1+2+5
(Eb 1+2+5)

E 7 aug

Esus 4

E1+2+5

F 7 aug

Fsus 4

F1+2+5

F # 7 aug
(Gb 7 aug)

F #sus 4
(Gb sus 4)

F #1+2+5
(Gb 1+2+5)

G 7 aug

Gsus 4

G1+2+5

G# 7 aug
(Ab 7 aug)

G# sus 4
(Ab sus 4)

G# 1+2+5
(Ab 1+2+5)

A 7 aug

Asus 4

A1+2+5

A # 7 aug
(Bb 7 aug)

A #sus 4
(Bb sus 4 )

A #1+2+5
(Bb 1+2+5)

B 7 aug

Bsus 4

B1+2+5

(
(

EM 7 aug

)

(

D #M 7 aug
(Eb M 7 aug)

)

DM 7 aug

)

(

C# M 7 aug
(Db M 7 aug)

)

(

)

CM 7 aug

Seventh augmented*
Übermäßiger DurSeptakkord*
Septième augmentée*
Séptima aumentada*

(

F #M 7 aug
(Gb M 7 aug)

)

(

)

FM 7 aug

)
(

BM 7 aug

)

(

A #M 7 aug
(Bb M 7 aug)

(

AM 7 aug

)

(

G# M 7 aug
(Ab M 7 aug)

)

(

)

GM 7 aug

141

Fingering Chart • Akkordliste • Tablature • Gráfica de digitado

Major seventh flatted fifth*
Dur-Akkord mit großer
Septime und
verminderter Quinte*
Quinte diminuée sur
majeure septième*
Mayor de séptima y quinta
bemol*

142

Flatted fifth*
Dur-Akkord mit
verminderter Quinte*
Quinte diminuée*
Quinta bemol*

Minor major seventh flatted fifth*
Moll-Akkord mit großer Septime
und verminderter Quinte*
Quinte diminuée sur septième
majeure sur mineur*
Menor mayor de séptima y quinta
bemol*

CM 7 (b5)

C(b5)

CmM 7 (b5)

C# M 7 (b5)
(Db M 7 (b5))

C #(b5)
(Db(b5) )

C# mM7 (b5)
(Db mM 7(b5))

DM 7 (b5)

D(b5)

DmM 7(b5)

D #M 7 (b5)
(Eb M 7 (b5))

D #(b5)
(Eb(b5))

D #mM 7(b5)
(Eb mM 7(b5))

EM 7 (b5)

E (b5)

EmM7 (b5)

FM 7 (b5)

F (b5)

FmM7 (b5)

F #M 7 (b5)
(Gb M 7 (b5) )

F #(b5)
(Gb(b5))

F #mM7 (b5)
(Gb mM7 (b5))

GM 7 (b5)

G (b5)

GmM7(b5)

G# M 7 (b5)
(Ab M 7 (b5) )

G# (b5)
(Ab(b5))

G# mM 7 (b5)
(Ab mM 7 (b5))

AM 7 (b5)

A(b5)

AmM 7(b5)

A #M 7 (b5)
(Bb M 7 (b5) )

A # (b5)
(Bb(b5))

A #mM 7 (b5)
(Bb mM 7 (b5))

BM 7 (b5)

B (b5)

BmM7 (b5)

The DSP Effects & Parameters • DSP-Effekte und -Parameter
Effets et paramètres DSP • Efectos de DSP y parámetros
1. Hall 1

2. Hall 2

3. Hall 3

4. Hall 4

7. Room 3

8. Room 4

9. Stage 1

10. Stage 2

5. Room 1
11. Plate 1

6. Room 2
12. Plate 2

These are all reverberation (“reverb” for short) effects. Reverb is the warm musical “ambience” you experience when listening to music in a hall or other natural environment.
1. REVERB TIME
Range: 0.3 … 30 sec.
Sets the amount of time it takes for the reverb sound to decay by 60 dB (virtually to silence).
2. DIFFUSION
Range: 0 … 10
Adjusts the left-right “spread” of the reverb sound. The higher the value the greater the spread.
3. INITIAL DELAY
Range: 0 … 63
The length of the initial delay before the actual reverb sound begins (in milliseconds). The higher the value the
longer the initial delay.
4. HPF CUTOFF
Range: Thru, 22Hz … 8.0kHz
The cutoff frequency of the high-pass filter applied to the reverb sound. No filter is applied when set to “Thru”.
5. LPF CUTOFF
Range: 1.0kHz … 18kHz, Thru
The cutoff frequency of the low-pass filter applied to the reverb sound. No filter is applied when set to “Thru”.

13. EaryRef1

14. EaryRef2

15. GateRev.

16. RevrsGat

EaryRef (Early Reflections) effects are created using different groupings of “early reflections” — the first
cluster of reflections that occurs after the direct sound but before the dense reflections that are known as reverberation begin.
The GateRev (Gate Reverb) and RevrsGat (Reverse Gate) effects combine reverb with a selectable “gate”.
1. EARLY REF TYPE (EarlyRef1 & 2)
Range: S-H, L-H, RDM, RVS, PLT, SPR
The “S-H” and “L-H” settings select typical groupings of early reflections that would occur in a small or large
hall, respectively. “RDM” (Random) produces an irregular series of reflections that could not occur naturally.
“RVS” (Reverse) generates a series of reflections that increase in level — like the effect produced by playing a
recorded reverberation sound backwards. “PLT” (Plate) produces a typical grouping of reflections that would
occur in a plate reverb unit, and “SPR (Spring) simulates the early reflections of a spring type reverb unit.
1. GATE TYPE (Gaterev. & RevrsGat)

Range: TYPE A, TYPE B

2. ROOM SIZE
Range: 0.1 … 7.0
Sets the separation between reflections. Higher values produce greater separation between reflections, and
therefore the effect of a bigger room.
3. DIFFUSION
Range: 0 … 10
Adjusts the left-right “spread” of the early reflection or gated reverb sound. The higher the value the greater the
spread.
4. INITIAL DELAY
Range: 0 … 63
Sets the delay time before the early reflection or gated reverb sound begins.
5. FEEDBACK LEVELRange: –63 … 0 … +63
Determines the amount of effect-sound feedback returned to the input of the effect stage. Higher negative or
positive values produce a more extended effect.

143

The DSP Effects & Parameters • DSP-Effekte und -Parameter • Effets et paramètres DSP •

17. Chorus 1

18. Chorus 2

19. Chorus 3

20. Chorus 4

22. Flanger1

23. Flanger2

24. Flanger3

25. Flanger4

21. Chorus 5

The chorus effects combine delay and modulation to effectively thicken and add warmth to the sound.
Flanging is a fairly pronounced effect based primarily on delay time modulation. By adjusting the various parameters you should be able to create an extremely broad range of sounds, from gentle shimmering
to wild sweeps.
1. LFO FREQUENCY Range: 0 … 127
Sets the speed of LFO (Low Frequency Oscillator) modulation, and therefore the rate of effect variation.
2. LFO PM DEPTH
Range: 0 … 127
Sets the depth of phase modulation. Higher values produce deeper modulation and therefore a more pronounced effect.
3. FEEDBACK LEVELRange: –63 … 0 … +63
Determines the amount of effect-sound feedback returned to the input of the effect stage. Higher negative or
positive values produce a more pronounced effect.
4. DELAY OFFSET
Range: 0 … 63
Varies the flanger delay time (the flanger effect is basically produced by modulating the delay time of one
signal in relation to another). Shorter delay times produce the greatest effect in the high-frequency range,
while longer delay times extend the effect to the middle and lower frequencies.

26. Symphon.

Symphonic is a broad, sweeping effect that adds a sense of scale to the sound.
1. LFO FREQUENCY Range: 0 … 127
Sets the speed of LFO (Low Frequency Oscillator) modulation, and therefore the rate of effect variation.
2. LFO DEPTH
Range: 0 … 127
Sets the depth of modulation. Higher values produce deeper modulation and therefore a more pronounced
effect.
3. DELAY OFFSET
Range: 0 … 63
Varies the symphonic effect delay time (the Symphonic effect is basically produced by modulating the delay
time of one signal in relation to another). Shorter delay times produce the greatest effect in the high-frequency
range, while longer delay times extend the effect to the middle and lower frequencies.

27. Phaser

A traditional “phaser” effect, producing a gentle phase-shift sound that can be used to add extra animation to
your sound.
1. LFO FREQUENCY Range: 0 … 127
Sets the speed of LFO (Low Frequency Oscillator) modulation, and therefore the rate of effect variation.
2. LFO DEPTH
Range: 0 … 127
Sets the depth of modulation. Higher values produce deeper modulation and therefore a more pronounced effect.
3. PHASE SHIFT
Range: 0 … 127
Sets the phase difference between the left and right channel phaser signals. The larger the value, the greater the
“spread” in the sound. A setting of “0” produces a centered effect.
4. FEEDBACK LEVEL Range: –63 … 0 … +63
Determines the amount of effect-sound feedback returned to the input of the effect stage. Higher negative or positive values produce a more pronounced effect.

144

Efectos de DSP y parámetros

28. Rot.Sp.1

29. Rot.Sp.2

30. Rot.Sp.3

31. Rot.Sp.4

32. Rot.Sp.5

These effects simulate the swirling sound of the rotary speakers often used with electronic organs.
1. LFO FREQUENCY Range: 0 … 127
Sets the speed of LFO (Low Frequency Oscillator) modulation, and therefore the rate of effect variation.
2. LFO DEPTH
Range: 0 … 127
Sets the depth of modulation. Higher values produce deeper modulation and therefore a more pronounced
effect.

33. Tremolo1

34. Tremolo2

35. GtrTrem.

Although “tremolo” effects, these effects also include a pitch-modulation depth parameter that can be
used to add a touch of vibrato.
1. LFO FREQUENCY Range: 0 … 127
Sets the speed of LFO (Low Frequency Oscillator) modulation, and therefore the rate of effect variation.
2. AM DEPTH
Range: 0 … 127
Sets the depth of amplitude modulation. Higher values produce deeper modulation and therefore a more
pronounced tremolo effect.
3. PM DEPTH
Range: 0 … 127
Sets the depth of pitch modulation. Higher values produce deeper modulation and therefore a more pronounced vibrato effect.

36. Auto Pan

This is a sophisticated pan program that allows creation of “rotary” pan in addition to straightforward pan effects.
1. LFO DEPTH
Range: 0 … 127
Sets the overall depth of modulation. Higher values produce deeper modulation and therefore a more
pronounced pan sweep.
2. L/R DEPTH
Range: 0 … 127
Sets the “depth” of the pan sweep from left to right and right to left.
3. F/R DEPTH
Range: 0 … 127
This parameter sets the apparent depth of the sweep from front to rear.
4. PAN DIRECTION Range: L<>R, L>R, L FOH, 7EH, 7FH, 09H, 01H, F7H
All parameters except MIDI master Tuning and Dsp setting are
reset to their default values.
Remote Channel setting is cancelled.
This message requires approximately 50ms to execute, so
sufficient time should be allowed before the next message is
sent.
F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H
Allows the volume of all channels to be changed simultaneously.
“mm” is used as the MIDI Master Volume value (“ll” is ignored).
The default value for “mm” is 7FH.

F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc, F7H
“mm, ll” is used as the MIDI Master Tuning value.
The tuning value is represented as follows:
T=M-128 (28<
=M<
=228), T=-100 (M<28), T=100 (M>228)
T is the actual tuning value in cents.
M is decimal value represented by 1-byte using bits 0..3 of
“mm” as the MSB and bits 0..3 of “ll” as the LSB.
The default values of “mm” and “ll” are 08H and 00H respectively.
n and cc are also recognized.
This value is not reset by a GM System ON or Reset All Controllers message.
This value affects not only MIDI reception part but the entire
system of the PSR-4000.

F0H, 43H, 1nH, 4CH, aaH, bbH, ccH, ddH........F7H
n: device number (n=0~FH)
aa,bb,cc: address High, Mid, Low
dd: data
A corresponding data size is transmitted when the data size is
2 or 4 parameters.
Note: This product is compatible with the XG format parameters listed in the chart, but not with the many other
parameters included in the XG full format.
F0H, 43H, 1nH, 4CH, 00H, 00H, 7E, 00H, F7H
n: device number (n=0~FH)

F0H, 43H, 0nH, 4CH, bl, bh, aaH, bbH, ccH, , cs, F7H
n: device number (n=0~FH)
bl, bh: byte count (only data portion shown)
aa,bb,cc: address High, Mid, Low (Refer to the accompanying chart)
cs: Checksum (Byte Count + Start Address + Data +
Checksum=0 : calculated binary in first 7 bit)
The data series listed under “Total Size” in the chart is one
bulk dump. Only the header address is used as the bulk
data address.
Since an error can occur when a large amount of bulk data
is received, data series longer than 512 bytes are divided
into groups of less than 512 bytes each, and transmitted
with a time interval of greater than 120 ms between each
group.
Note: This product is compatible with the XG format parameters listed in the chart, but not with the many other parameters included in the XG full format.

See Tables 1-1, 1-2.

See Tables 1-1, 1-3.

See Tables 1-1, 1-5.

F0H, 43H, 3nH, 4CH, aaH, bbH, ccH, F7H
n: device number (n=0~FH)
aa,bb,cc: address High, Mid, Low
Requests are accepted for parameters which can be changed.
Only the header address is interpreted as the parameter request address for a Data Size of 2 or 4 parameters.

F0H, 43H, 2nH, 4CH, aaH, bbH, ccH, F7H
n: device number (n=0~FH)
aa,bb,cc: address High, Mid, Low
The data series listed under “Total Size” in the chart is one bulk
dump. Only the header address is interpreted as the bulk data
address.

All parameters other than MIDI master tuning are reset to their
default values.
This message requires approximately 50ms to execute, so
sufficient time should be allowed before the next message is
sent.

See Tables 1-1, 1-2.

See Tables 1-1, 1-3.

See Tables 1-1, 1-4.

See Tables 1-1, 1-5.

151

MIDI Data Format • MIDI-Datenformat • Format des donées MIDI •

Parameter Base Address
Model ID = 4C

Parameter Change
Address
(H) (M) (L)
XG
00
00
00
SYSTEM
00
00 7D
00
00
7E
00
00
7F
EFFECT 1
02
01
00
DRUM
30
18
00
31
18
00

Description
System
Drum Setup Reset
XG System On
Reset All Parameters
Effect1(Reverb,Chorus,Variation )
Drum Setup 1
Drum Setup 2

Address
3n 0B 00
3n 0C 00
:
3n 5B 00

Parameter
note number 13
note number 14
:
note number 91

MIDI Parameter Change table ( SYSTEM )
Address
(H)
00 00 00
01
02
03
04
06
7D
7E
7F
TOTAL SIZE

Size
(H)
4

Data
(H)
0000 - 07FF

1
1

00 - 7F
28 - 58
n
00
00

Parameter

Description

MASTER TUNE

-102.4 - +102.3[cent]
1st bit3-0→bit15-12
2nd bit3-0→bit11-8
3rd bit3-0→bit7-4
4th bit3-0→bit3-0
0 - 127
-24 - +24[semitones]
n=Drum setup number
00=XG sytem ON
00=ON (receive only)

MASTER VOLUME
TRANSPOSE
DRUM SETUP RESET
XG SYSTEM ON
RESET ALL PARAMETERS

Default value
(H)
00 04 00 00
-400

7F
40

MIDI Parameter Change table ( EFFECT 1)
Refer to the “Effect MIDI Map” for a complete list of Reverb, Chorus and Variation type numbers.
Refer to the “Effect Parameter List” for a detailed description of each parameter.

152

Address
(H)
02 01 00

Size
(H)
2

Data
(H)
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
01-7F

Parameter

Description

REVERB TYPE MSB
REVERB TYPE LSB
REVERB PARAMETER 1
REVERB PARAMETER 2
REVERB PARAMETER 3
REVERB PARAMETER 4
REVERB PARAMETER 5
REVERB PARAMETER 6
REVERB PARAMETER 7
REVERB PARAMETER 8
REVERB PARAMETER 9
REVERB PARAMETER 10
REVERB RETURN
REVERB PAN

Refer to Effect Program List
00 : basic type
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
-∞dB...0dB...+6dB(0...64...127)
L63...C...R63(1...64...127)

Default value
(H)
01(=HALL1)
00
Depends on reverb type
Depends on reverb type
Depends on reverb type
Depends on reverb type
Depends on reverb type
Depends on reverb type
Depends on reverb type
Depends on reverb type
Depends on reverb type
Depends on reverb type
40
40

02
03
04
05
06
07
08
09
0A
0B
0C
0D
TOTAL SIZE

1
1
1
1
1
1
1
1
1
1
1
1
0E

02 01 10
11
12
13
14
15
TOTAL SIZE

1
1
1
1
1
1
6

00-7F
00-7F
00-7F
00-7F
00-7F
00-7F

REVERB PARAMETER 11
REVERB PARAMETER 12
REVERB PARAMETER 13
REVERB PARAMETER 14
REVERB PARAMETER 15
REVERB PARAMETER 16

Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List

Depends on reverb type
Depends on reverb type
Depends on reverb type
Depends on reverb type
Depends on reverb type
Depends on reverb type

02 01 20

22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
TOTAL SIZE

1
1
1
1
1
1
1
1
1
1
1
1
1
0F

00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
01-7F
00-7F

CHORUS TYPE MSB
CHORUS TYPE LSB
CHORUS PARAMETER 1
CHORUS PARAMETER 2
CHORUS PARAMETER 3
CHORUS PARAMETER 4
CHORUS PARAMETER 5
CHORUS PARAMETER 6
CHORUS PARAMETER 7
CHORUS PARAMETER 8
CHORUS PARAMETER 9
CHORUS PARAMETER 10
CHORUS RETURN
CHORUS PAN
SEND CHORUS TO REVERB

Refer to Effect MIDI Map
00 : basic type
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
-∞dB...0dB...+6dB(0...64...127)
L63...C...R63(1...64...127)
-∞dB...0dB...+6dB(0...64...127)

41(=CHORUS1)
00
Depends on chorus type
Depends on chorus type
Depends on chorus type
Depends on chorus type
Depends on chorus type
Depends on chorus type
Depends on chorus type
Depends on chorus type
Depends on chorus type
Depends on chorus type
40
40
00

02 01 30
31
32
33
34
35
TOTAL SIZE

1
1
1
1
1
1
6

00-7F
00-7F
00-7F
00-7F
00-7F
00-7F

CHORUS PARAMETER 11
CHORUS PARAMETER 12
CHORUS PARAMETER 13
CHORUS PARAMETER 14
CHORUS PARAMETER 15
CHORUS PARAMETER 16

Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List

Depends on chorus type
Depends on chorus type
Depends on chorus type
Depends on chorus type
Depends on chorus type
Depends on chorus type

02 01 40

00-7F
00-7F
00-7F
00-7F

VARIATION TYPE MSB
VARIATION TYPE LSB
VARIATION PARAMETER 1 MSB
VARIATION PARAMETER 1 LSB

Refer to Effect Program List
00 : basic type
Refer to Effect Parameter List
Refer to Effect Parameter List

05(=DELAY L,C,R)
00
Depends on variation type
Depends on Variation type

Formato de datos MIDI
44

56
57
58
59
5A
5B

1
1
1
1
1
1

TOTAL SIZE

02 01 70
71
72
73
74
75
TOTAL SIZE

1
1
1
1
1
1
6

00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
00-7F
01-7F
00-7F
00-7F
00-01
00-01

VARIATION PARAMETER 2 MSB
VARIATION PARAMETER 2 LSB
VARIATION PARAMETER 3 MSB
VARIATION PARAMETER 3 LSB
VARIATION PARAMETER 4 MSB
VARIATION PARAMETER 4 LSB
VARIATION PARAMETER 5 MSB
VARIATION PARAMETER 5 LSB
VARIATION PARAMETER 5 MSB
VARIATION PARAMETER 6 LSB
VARIATION PARAMETER 7 MSB
VARIATION PARAMETER 7 LSB
VARIATION PARAMETER 8 MSB
VARIATION PARAMETER 8 LSB
VARIATION PARAMETER 9 MSB
VARIATION PARAMETER 9 LSB
VARIATION PARAMETER 10 MSB
VARIATION PARAMETER 10 LSB
VARIATION RETURN
VARIATION PAN
SEND VARIATION TO REVERB
SEND VARIATION TO CHORUS
VARIATION CONNECTION
VARIATION PART

Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
-∞dB...0dB...+6dB(0...64...127)
L63...C...R63(1...64...127)
-∞dB...0dB...+6dB(0...64...127)
-∞dB...0dB...+6dB(0...64...127)
0:INSERTION,1:SYSTEM
OFF(127)
Part 1-16 (0-15)

Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
Depends on Variation type
40
40
00
00
00
7F

00-7F
00-7F
00-7F
00-7F
00-7F
00-7F

VARIATION PARAMETER 11
VARIATION PARAMETER 12
VARIATION PARAMETER 13
VARIATION PARAMETER 14
VARIATION PARAMETER 15
VARIATION PARAMETER 16

Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List
Refer to Effect Parameter List

Depends on variation type
Depends on variation type
Depends on variation type
Depends on variation type
Depends on variation type
Depends on variation type

Default value
(H)
00 (Part other than 10)
01 (Part10)

* “VARIATION” refers to the DSP EFFECT on the panel.

MIDI Parameter Change table ( MULTI PART )
Address
(H)
08 nn 07

Size
(H)
1

Data
(H)
00 - 01

Parameter

Description

PART MODE

0:NORMAL
1:Preset Drum
2 - 3:Drum Setup 1 – 2

nn
nn
nn
nn
nn
nn
nn
nn
nn
nn
nn
nn
nn

1
1
1
1
1
1
1
1
1
1
1
1
1

00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F

DRY LEVEL
SCALE TUNING C
SCALE TUNING C#
SCALE TUNING D
SCALE TUNING D#
SCALE TUNING E
SCALE TUNING F
SCALE TUNING F#
SCALE TUNING G
SCALE TUNING G#
SCALE TUNING A
SCALE TUNING A#
SCALE TUNING B

0 - 127
-64 - +63[cent]
-64 - +63[cent]
-64 - +63[cent]
-64 - +63[cent]
-64 - +63[cent]
-64 - +63[cent]
-64 - +63[cent]
-64 - +63[cent]
-64 - +63[cent]
-64 - +63[cent]
-64 - +63[cent]
-64 - +63[cent]

7F
40
40
40
40
40
40
40
40
40
40
40
40

Default value
(H)
40
40
Depends on note
Depends on note

11
41
42
43
44
45
46
47
48
49
4A
4B
4C

nn = MIDI Channel (00 – 0F)

MIDI Parameter Change table ( DRUM SETUP )
Address
(H)
3n rr 00
3n rr 01
3n rr 02
3n rr 04

3n rr 05
3n rr 06
3n rr 07
3n rr 0B
3n rr 0C
3n rr 0D
3n rr 0E
3n rr 0F
TOTAL SIZE

Size
(H)
1
1
1
1

Data
(H)
00 - 7F
00 - 7F
00 - 7F
00 - 7F

Parameter

Description

PITCH COARSE
PITCH FINE
LEVEL
PAN

1
1
1
1
1
1
1
1
10

00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F
00 - 7F

REVERB SEND
CHORUS SEND
VARIATION SEND
FILTER CUTOFF FREQUENCY
FILTER RESONANCE
EG ATTACK
EG DECAY1
EG DECAY2

-64 - +63
-64 - +63[cent]
0 - 127
0:random
1: L63
:
64: C (center)
:
127: R63
0 - 127
0 - 127
0 - 127
-64 - 63
-64 - 63
-64 - 63
-64 - 63
-64 - 63

Depends on note
Depends on note
7F
40
40
40
40
40

[Note]
n:
Drum Setup number (0 to 1)
rr:
Note number (0D to 54)
Receipt of “XG System On” or “GM System On” message generates reinitialization of all DRUM SETUP parameters.
“Drum Setup Reset” message can be used to reinitialize drum setup parameters.

153

MIDI Data Format • MIDI-Datenformat • Format des donées MIDI • Formato de datos MIDI
● Effect MIDI Map
Reverb Type
MSB (HEX)
00
01
02
03
04
05
:
00F
10
11
12
13
14
:
7F

TYPE LSB (HEX)
00
01
No Effect
<——
[1]Hall 1
Hall 2
Room 1
Room 2
Stage 1
Stage 2
Plate
<——
No Effect
<——
:
<——
No Effect
<——
[13]WhiteRoom <——
[14]Tunnel
<——
[15]Canyon
<——
[16]Basement
<——
No Effect
<——
:
<——
No Effect
<——

02
<——
<——
Room 3
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

<—— .......... same as BASIC EFFECT(LSB=0)

03~07
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

08
<——
[2]Hall 2
[5]Room 1
[9]Stage 1
[11]Plate 1
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

09
<——
[3]Hall 3
[6]Room 2
[10]Stage 2
[12]Plate 2
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

0A
<——
[4]Hall 4
[7]Room 3
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

0B
<——
<——
[8]Room 4
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

0C
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

0D~
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

[ ] ........... Panel Effect Number

Chorus Type
MSB (HEX)
00
01
:
40
41
42
43
44
:
7F

TYPE LSB (HEX)
00
01
No Effect
<——
No Effect
<——
:
<——
No Effect
<——
Chorus 1
Chorus 5
Chorus 4
Celeste 2
Flanger 1
Flanger 4
No Effect
<——
:
<——
No Effect
<——

02
<——
<——
<——
<——
Chorus 3
Celeste 3
<——
<——
<——
<——

03~07
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

08
<——
<——
<——
<——
<——
Chorus 2
Flanger 1
<——
<——
<——

09
<——
<——
<——
<——
<——
Chorus 3
Flanger 2
<——
<——
<——

0A
<——
<——
<——
<——
<——
Chorus 1
Flanger 3
<——
<——
<——

0B
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

0C
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

0D~
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

03~07
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

08
<——
[2]Hall 2
[5]Room 1
[9]Stage 1
[11]Plate 1
[38]Delay LCR
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
[18]Chorus 2
[22]Flanger 1
[26]Symphonic
[28]Rotary Sp1
[33]Tremolo1
[36]AutoPan
<——
<——
<——
[42]Dist. HARD
[44]EQ DISCO
<——
[37]Auto Wah
<——
<——
<——

09
<——
[3]Hall 3
[6]Room 2
[10]Stage 2
[12]Plate 2
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
[19]Chorus 3
[23]Flanger 2
<——
<——
<——
[29]Rotary Sp2
<——
<——
<——
[43]Dist. SOFT
[45]EQ TEL
<——
<——
<——
<——
<——

0A
<——
[4]Hall 4
[7]Room 3
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
[17]Chorus 1
[24]Flanger 3
<——
Rotary Sp3
[31]Rotary Sp4
[30]Rotary Sp3
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

0B
<——
<——
[8]Room 4
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
[32]Rotary Sp5
<——
<——
Rotary Sp4
Tremolo 4
[34]Tremolo2
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

0C
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
[35]Gtr Tremolo
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

0D~
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

<—— .......... same as BASIC EFFECT(LSB=0)

Variation Type (DSP EFFECT)
MSB (HEX)
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
:
13
14
15
:
3F
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
:
7F

TYPE LSB (HEX)
00
01
No Effect
<——
[1]Hall 1
Hall 2
Room 1
Room 2
Stage 1
Stage 2
Plate
<——
Delay L,C,R
<——
[39]Delay L,R
<——
[40]Echo
<——
[41]Cross Delay <——
[13]Early Ref 1 [14]Early Ref 2
[15]Gate Reverb <——
[16]ReverseGate <——
No Effect
<——
:
<——
No Effect
<——
[46]Karaoke1
[47]Karaoke2
No Effect
<——
:
<——
No Effect
<——
True
<——
Chorus 1
[21]Chorus 5
[20]Chorus 4
Celeste 2
Flanger 1
[25]Flanger 4
Symphonic
<——
Rotary SP.
<——
Tremolo
<——
Auto Pan
<——
[27]Phaser
<——
[49]Distortion
<——
[50]Over Drive <——
Amp Sim.
<——
3Band EQ
<——
2Band EQ
<——
Auto Wah
<——
No Effect
<——
:
<——
No Effect
<——

02
<——
<——
Room 3
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
[48]Karaoke3
<——
<——
<——
<——
Chorus 3
Celeste 3
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

<—— .......... same as BASIC EFFECT(LSB=0)

<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——
<——

[ ] ........... Panel Effect Number

* The effect name appearing in the LCD display may be abbreviated.

154

MIDI Data Format • MIDI-Datenformat • Format des donées MIDI • Formato de datos MIDI

● Effect Parameter List
BASIC TYPE No.

Parameter

Display*

Value

BASIC TYPE No.

Parameter

Display*

Value

CHORUS
CELESTE

1
2
3
4
6
7
8
9
10
11
12
13
14
15

LFO Frequency
LFO PM Depth
Feedback Level
Delay Offset
EQ Low Frequency
EQ Low Gain
EQ High Frequency
EQ High Gain
Dry/Wet
EQ Mid Frequency
EQ Mid Gain
EQ Mid Width
LFO AM Depth
Input Mode

0.00~39.7Hz
0~127
-63~+63
0~127
50Hz~2.0kHz
-12~+12dB
500Hz~16.0kHz
-12~+12dB
D63>W ~ D=W ~ DW ~ D=W ~ DW ~ D=W ~ DW ~ D=W ~ DR,L->R,L<-R,Lturn,
Rturn,L/R
50Hz~2.0kHz
-12~+12dB
500Hz~16.0kHz
-12~+12dB
100Hz~10.0kHz
-12~+12dB
1.0~12.0

PHASER

1
2
3
4
6
7
8
9
10
11
12
13

LFO Frequency
LFO Depth
Phase Shift Offset
Feedback Level
EQ Low Frequency
EQ Low Gain
EQ High Frequency
EQ High Gain
Dry/Wet
Stage
Diffusion
LFO Phase Difference

0.00~39.7Hz
0~127
0~127
-63~+63
50Hz~2.0kHz
-12~+12dB
500Hz~16.0kHz
-12~+12dB
D63>W ~ D=W ~ DW ~ D=W ~ DW ~ D=W ~ DW ~ D=W ~ DW ~ D=W ~ DR ~ E=R ~ ER Delay
R->L Delay
Feedback Level
Input Select
High Damp
Dry/Wet
HPF Cutoff
LPF Cutoff
EQ Low Frequency
EQ Low Gain
EQ High Frequency
EQ High Gain

0.1~355.0ms
0.1~355.0ms
-63~+63
L,R,L&R
0.1~1.0
D63>W ~ D=W ~ DW ~ D=W ~ DW ~ D=W ~ DW ~ D=W ~ DW ~ D=W ~ DW ~ D=W ~ DW ~ D=W ~ DR ~ E=R ~ EW ~ D=W ~ D
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.5
Linearized : Yes
Encryption : Standard V1.2 (40-bit)
User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Page Count : 165
Page Layout : SinglePage
XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6
About : uuid:bde02a21-0900-4dca-99df-33472d35c12d
Producer : Acrobat Distiller 4.0 for Macintosh
Keywords :
Create Date : 1999:10:13 11:39:16Z
Modify Date : 2003:07:29 21:31:03+09:00
Metadata Date : 2003:07:29 21:31:03+09:00
Creator Tool : Adobe PageMaker 6.52
Document ID : uuid:7817c543-7987-44f4-8130-19aa2130560a
Format : application/pdf
Description : PSR4000E1
Title : PSR4000E1
Creator :
Author :
Subject : PSR4000E1

EXIF Metadata provided by EXIF.tools

Navigation menu

Upload a User Manual

Versions of this User Manual:

Wiki Guide
HTML
Mobile
Download & Help

Views

User Manual

Discussion / Help

Navigation