Yamaha RX A3030/RX A2030 Quick Guide For Multi Zone And Remote Control Functions A3030 U
User Manual: Yamaha RX-A3030/RX-A2030 Quick Guide for Multi-zone and Remote Control Functions
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
RX-A3030/RX-A2030 Quick Guide for Multi-zone and Remote Control Functions U Multi-zone function What is the multi-zone function? Preparations The multi-zone function allows you to play back different input sources in the room where the unit is installed (main zone) and in other rooms (Zone2, Zone3 and Zone4). For example, while you are watching TV in the living room (main zone), another person can listen to PC music in the study room (Zone2), and another can listen to radio in the guest room (Zone3), and the other can watch a DVD in the kitchen (Zone4). ■ Connection overview Main zone Zone4 TV Speakers This guide explains how to set up a Zone2 system using the unit’s internal amplifier and a Zone4 system using a TV. This will enable you to use the 7.2-channel speaker system in the main zone, 2-channel speaker system in Zone2, and enjoy HDMI videos/audio in Zone4 simultaneously. (When Zone2 output is disabled, you can use the 9.2-channel speaker system in the main zone.) For information on other multi-zone configurations, refer to the Owner’s Manual in the supplied CD-ROM. Zone2 HDMI IN TV HDMI IN Left Right Already connected (refer to Easy Setup Guide) The unit (rear) DC OUT 5V 0.5A NETWORK 2 ARC AV 1 AV 2 AV 3 AV 4 (1 BD/DVD) HDMI HDMI OUT ( 3 NET ) 1 PHONO AV 1 (ZONE OUT) MONITOR OUT/ ZONE OUT AV OUT Y AV 2 AV 3 RS-232C AV 4 AV 5 AV 6 AV 7 (1 BD/DVD) PB COMPONENT VIDEO PR Y AV 3 PB TRIGGER OUT PR C AV 1 A MONITOR OUT/ZONE OUT Y PB PR GND 1 REMOTE 1 IN OUT (SINGLE) (FRONT) 2 IN OUT AV 2 2 B D AV 4 AUDIO 1 AUDIO 2 (2 TV) L AUDIO 3 AUDIO 4 MULTI CH INPUT 12V ZONE OUT/PRE OUT CENTER PRE OUT R 0.1A 1 2 1 COAXIAL 2 COAXIAL 3 OPTICAL 4 OPTICAL 5 OPTICAL FRONT 6 COAXIAL SURROUND SUR. BACK ZONE 2 / SUBWOOFER F.PRESENSE ZONE 3 / R.PRESENSE FRONT SURROUND SUR. BACK (REAR) SUBWOOFER CENTER SPEAKERS R SURROUND L R SURROUND BACK L ZONE 2/ZONE 3/R.PRESENCE R EXTRA SP2 L CENTER R FRONT L ZONE 2/ZONE 3/F.PRESENCE/ BI–AMP EXTRA SP1 R AC IN L L ANTENNA 75Ω Study room (Zone2) FM HD Radio (4 RADIO) AM L Kitchen (Zone4) SINGLE R R Living room (main zone) You can select the following input sources for Zone2: • Digital audio input (2-channel PCM only) (AV 1–7, V-AUX, AUDIO 1–2) • Analog audio input (AV 1–4, V-AUX, AUDIO 1–4, PHONO) • TUNER (FM/AM radio) • USB (including iPod) • SERVER • AirPlay • Network streaming services (available on some models) Already connected (refer to Easy Setup Guide) BD/DVD player HDMI OUT L L Playback device (such as a CD player) R R AUDIO OUT You can select the following input sources for Zone4: • HDMI input (AV 1–7, V-AUX) • For information on how to connect speakers or a TV in the main zone, refer to the Easy Setup Guide. • AirPlay is available in Zone2 only when AirPlay playback is ongoing in the main zone. 1 ■ Connections 2 Caution • Before connecting the speakers, remove the unit’s power cable from the AC wall outlet. Connect the playback devices (such as CD players) in the main zone to the analog stereo input jacks with stereo pin cables (RCA stereo cables). Skip this step if you do not use Zone2. • Ensure that the core wires of the speaker cable do not touch each other or come into contact with the unit’s metal areas. This may damage the unit or the speakers. Analog stereo input jacks (such as AUDIO 1–4) • Connect the speakers with the correct polarity. The unit (rear) L 1 Connect the speakers in Zone2 to the EXTRA SP 2 terminals with speaker cables. L L L R R R Playback device (such as a CD player) R Skip this step if you do not use Zone2. AUDIO OUT EXTRA SP 2 terminals The unit (rear) SPEAKERS ZONE 2/ZONE 3/R.PRESENCE R EXTRA SP2 L • This guide explains how to connect a playback device to the unit with an analog stereo connection for example. If you want to connect a playback device with a digital connection (HDMI, digital optical or digital coaxial), refer to the Owner’s Manual in the supplied CD-ROM. 3 Connect the TV in Zone4 to the HDMI OUT 2 (ZONE OUT) jack with an HDMI cable. Skip this step if you do not use Zone4. The unit (rear) HDMI OUT 2 (ZONE OUT) jack TV (Zone4) OUT HDMI IN 2 (ZONE OUT) Left HDMI HDMI Right Speakers (Zone2) 4 Connect the power cable to an AC wall outlet. To connect speaker cables ZO + (red) +R NE c SP 2 SE NC E L - d - (black) 2 To operate the unit and external devices from other rooms 2/ZSP ONEA E KE EX 3/R RS TR .P RE A b a You can operate the unit and external devices from other rooms using the supplied remote control if you connect an infrared signal receiver/emitter to the unit’s REMOTE IN/OUT jacks. For details, refer to the Owner’s Manual in the supplied CD-ROM. ■ Zone2/Zone4 setup SOURCE RECEIVER Use the supplied remote control to set the Zone2/Zone4 function. AV 1 2 3 4 5 6 7 V-AUX AUDIO 1 2 3 4 PHONO MULTI L USB NET TUNER [A] [B] [C] 1 2 3 Turn on the unit and TV in the main zone. 4 Use the cursor keys to select “Setup” and press ENTER. SCENE 1 2 3 PROGRAM MUTE Press ON SCREEN to display the on-screen menu on the TV. d Press RETURN four times to go back to the top “Setup” menu screen. 4 VOLUME ON SCREEN TOP MENU Switch the TV input to display video from the unit. POP-UP/MENU OPTION ON SCREEN ENTER RETURN DISPLAY A Cursor keys ENTER RETURN 5 6 Follow the procedure below to set the Zone4 function. Follow the procedure below to set the Zone2 function. Skip this step if you do not use Zone4. Skip this step if you do not use Zone2. a Use the cursor keys and ENTER to select “Multi Zone” → “HDMI OUT2 Assign”. a Use the cursor keys and ENTER to select “Speaker” → “Manual Setup” → “Power Amp Assign”. MODE CLASSICAL LIVE CLUB ENTERTAIN ENTERTAI T N MOVIE STEREO STRAIGHT PRESET TV PURE DIRECT INPUT TV VOL TV CH MUTE b Use the cursor keys to select “Zone4”. This sets the HDMI OUT 2 (ZONE OUT) jack to be used for Zone4 output. b Use the cursor keys to select “9ch +1ZONE” and press ENTER. c Press ENTER twice, use the cursor keys to select “Zone2”, and press ENTER again. This sets the EXTRA SP 2 terminals to be used for Zone2 output. 7 Press ON SCREEN to exit from the on-screen menu. 3 SOURCE RECEIVER RECEIVER z Display window AV 1 2 3 4 5 6 7 V-AUX 1 2 3 4 PHONO MULTI L USB NET TUNER [A] [B] [C] AUDIO AV 1–7 V-AUX AUDIO 1–4 PHONO USB NET TUNER Controlling Zone2 or Zone4 2 3 V-AUX: VIDEO AUX jacks (on the front panel) Follow the procedure below to enable Zone2 output and select an input source for Zone2. AUDIO 1–4: AUDIO 1–4 jacks 1 USB: USB jack (on the front panel) 4 PHONO: PHONO jacks Press ZONE repeatedly until “ZONE2” lights up in the display window. NET: NETWORK jack (press repeatedly to select a desired network source) This enables you to control Zone2 with the remote control. PROGRAM VOLUME MUTE TOP MENU TUNER: FM/AM radio Selected zone (turns off when main zone is selected) RECEIVER POP-UP/MENU OPTION ON SCREEN • If you have made more than one audio connection for AV 1–4, V-AUX or AUDIO 1–2, audio signals input to the unit from the external device is determined according to the “Audio Select” setting in the “Option” menu. For details, refer to the Owner’s Manual in the supplied CD-ROM. ENTER RETURN 2 DISPLAY A Press RECEIVER z. • You cannot select USB and network sources exclusively for each zone. For example, if you select “SERVER” for Zone2 when “USB” is selected for the main zone, the input source for the main zone also switches to “SERVER”. Each time you press the key, Zone2 is enabled or disabled. SUR. MODE DECODE ENHANCER PARTY HDMI OUT INFO MEMORY FM AM 1 2 CLASSICAL LIVE 3 CLUB ENTERTAIN 5 MOVIE 6 STEREO STRAIGHT 8 9 PURE SLEEP DIRECT TV VOL TV CH 0 ENT LEVEL ZONE SETUP 4 SPIMP.- DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE 3 4 IN OUT 1 OUT 2 2 ENHANCER SLEEP TV 7 INPUT 10 MUTE HD 3 ZONE 4 • Digital audio signals (HDMI, digital optical or digital coaxial signals) input to the unit is available in Zone2 only when 2-channel PCM signals are input. When Zone2 is enabled, “ZONE2” lights up in the front display. 4 TUN./ CH PRESET Use the following keys to select an input source. AV 1–7: AV 1–7 jacks ■ Controlling Zone2 SCENE 1 3 Lights up Zone2:On MUTE VOLUME ADAPTIVE DRC PL L C R PR SL SW1 SW SW2 SR PL SBL SB SBR PR Start playback on the external device or select a radio station. For details about the playback operation, refer to the instruction manual for the external device or Owner’s Manual on the supplied CD-ROM. SOURCE RECEIVER RECEIVER z Display window Follow the procedure below to enable Zone4 output and select an input source for Zone4. AV 1–7 V-AUX 1 AV 1 2 3 4 5 6 7 V-AUX AUDIO 1 2 3 4 PHONO MULTI L USB NET TUNER [A] [B] [C] 1 2 ■ Controlling Zone4 This enables you to control Zone4 with the remote control. Selected zone (turns off when main zone is selected) SCENE 3 PROGRAM 4 RECEIVER VOLUME MUTE TOP MENU 2 POP-UP/MENU OPTION ON SCREEN RETURN When Zone4 is enabled, “ZONE4” lights up in the front display. DISPLAY SUR. MODE DECODE ENHANCER PARTY HDMI OUT INFO MEMORY FM AM 1 2 CLASSICAL LIVE 3 CLUB ENTERTAIN SPIMP.- DOCK TAG HD STEREO TUNED PRE AMP PARTY ZONE ZONE 3 4 IN OUT 1 OUT 2 ENHANCER SLEEP HD 3 TUN./ CH PRESET 4 5 MOVIE 6 STEREO STRAIGHT 8 9 PURE SLEEP DIRECT TV VOL TV CH 0 ENT LEVEL ZONE SETUP Zone4:On MUTE VOLUME ADAPTIVE DRC PL L C R PR SL SW1 SW SW2 SR PL SBL SB SBR PR Lights up TV 10 MUTE Press RECEIVER z. Each time you press the key, Zone4 is enabled or disabled. ENTER 7 INPUT Press ZONE repeatedly until “ZONE4” lights up in the display window. ZONE 3 Use the following keys to select an input source. AV 1–7: AV 1–7 (HDMI) jacks V-AUX: VIDEO AUX (HDMI IN) jack (on the front panel) 4 Start playback on the external device. For details about the playback operation, refer to the instruction manual for the external device. • We recommend that you disable HDMI Control on the playback devices connected to the unit when using the Zone4 function. 5 Controlling your TV with the remote control of the unit SOURCE RECEIVER Display window AV 1 2 3 4 5 6 7 V-AUX By registering the remote control code for your TV, you can operate it with the remote control of the unit. For information on how to register remote control codes for other external devices, refer to the Owner’s Manual in the supplied CD-ROM. AUDIO 1 2 3 4 PHONO MULTI L USB NET TUNER [A] [B] [C] Registering the remote control code SCENE 1 2 3 PROGRAM 1 4 TOP MENU POP-UP/MENU See “List of TV’s remote control codes” (p.7) to find your TV’s remote control code. Once the remote control code is successfully registered, “OK” appears in the display window. If you cannot find your TV’s manufacturer, use “Remote Control Code Search” in the supplied CD-ROM to find it. If “ERROR” appears, registration has failed. Repeat from Step 3. OPTION ON SCREEN Cursor keys ENTER ENTER RETURN • If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes. DISPLAY 2 MODE Press SETUP. “SETUP” appears in the display window. CLASSICAL LIVE CLUB ENTERTAIN MOVIE STEREO STRAIGHT PRESET SETUP TV PURE DIRECT INPUT To exit from the setup menu, press SETUP. TV operations Once you have registered the remote control code for your TV, you can control it using the TV operation keys, regardless of the input source selected on the unit. TV operation keys Perform each of the following steps within 30 seconds. Otherwise, the setting will be canceled. If this happens, repeat from Step 2. TV z 3 SUR. DECODE ENHANCER PARTY INFO MEMORY FM 1 2 3 5 Use the cursor keys (q/w) to select “PRESET” and press ENTER. HDMI OUT AM PRESET TUN./ CH 6 Numeric keys 7 8 9 10 0 ENT SLEEP LEVEL ZONE SETUP SETUP 4 Press TV z and press ENTER. “----” (empty) or code currently registered ---6 6 TV CH MUTE 4 Use the numeric keys or cursor keys to enter the 4-digit remote control code and press ENTER. VOLUME MUTE TV VOL 5 TV operation keys INPUT Switches the video inputs of the TV. MUTE Mutes the audio output of the TV. TV VOL Adjust the volume of the TV. TV CH Switch the channels of the TV TV z Turns on/off the TV. List of TV’s remote control codes Elite Hitachi 0320, 0340, 0350 0008. 0012, 0026, 0066, 0084, 0092, 0093, 0120, 0172, 0173, 0255, 0270, 0271, 0282, 0320, 0335, 0338, 0342, 0344, 0346, 0347, 0365, 0382, 0448, 0456, 0467, 0482, 0484, 0487 0031, 0053, 0066, 0116, 0117, 0140, 0161, 0164, 0175, 0195, 0269, 0277, 0282, 0300, 0309, 0317, 0320, 0323, 0328, 0342, 0343, 0346, 0349, 0350, 0366, 0368, 0377, 0466, 0471, 0478 Mitsubishi 0008, 0026, 0031, 0053, 0066, 0084, 0093, 0098, 0150, 0178, 0289, 0320, 0339, 0344, 0350, 0376 NEC 0008, 0026, 0050, 0052, 0053, 0072, 0103, 0282, 0344 Panasonic 0016, 0017, 0020, 0022, 0023, 0035, 0052, 0056, 0084, 0085, 0133, 0163, 0193, 0284, 0286, 0290, 0292, 0320, 0325, 0347, 0356, 0483, 0485, 0490 Philips LG Pioneer Samsung Sharp 0008, 0009, 0010, 0011, 0012, 0032, 0048, 0049, 0052, 0122, 0128, 0134, 0186, 0187, 0213, 0221, 0224, 0226, 0239, 0256, 0257, 0259, 0261, 0263, 0267, 0280, 0281, 0287, 0296, 0299, 0301, 0303, 0305, 0313, 0319, 0320, 0324, 0333, 0339, 0342, 0349, 0350, 0353, 0357, 0360, 0380, 0383, 0452, 0459, 0460 0008, 0026, 0094, 0095, 0161, 0320, 0345, 0347, 0349, 0350, 0458, 0480 0004, 0005, 0006, 0007, 0008, 0012, 0026, 0031, 0036, 0050, 0053, 0076, 0077, 0079, 0114, 0124, 0125, 0126, 0127, 0139, 0161, 0183, 0185, 0190, 0191, 0258, 0264, 0277, 0282, 0320, 0323, 0334, 0337, 0342, 0343, 0349, 0350, 0351, 0373, 0453, 0468 0000, 0001, 0002, 0003, 0007, 0008, 0012, 0026, 0060, 0088, 0089, 0091, 0138, 0165, 0170, 0178, 0198, 0229, 0262, 0278, 0279, 0291, 0308, 0312, 0336, 0344, 0354, 0370, 0449, 0450, 0451, 0464, 0474, 0476, 0481 Sony Toshiba Vizio 0038, 0044, 0045, 0047, 0055, 0090, 0104, 0105, 0107, 0110, 0123, 0184, 0220, 0248, 0249, 0251, 0252, 0254, 0326, 0343, 0344, 0371, 0374, 0457, 0475, 0486 0018, 0019, 0040, 0041, 0046, 0073, 0100, 0103, 0108, 0109, 0111, 0121, 0132, 0166, 0208, 0210, 0214, 0217, 0260, 0268, 0282, 0283, 0293, 0304, 0306, 0307, 0329, 0344, 0355, 0454, 0491 0008, 0177, 0218, 0242, 0500, 0501, 0502, 0503, 0506 7 © 2013 Yamaha Corporation Printed in Malaysia ZF81830
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Modify Date : 2013:05:10 15:18:05+09:00 Create Date : 2013:05:10 15:18:05+09:00 Metadata Date : 2013:05:10 15:18:05+09:00 Format : application/pdf Document ID : uuid:658e544e-0f78-4e06-906f-8ffee9e565fc Instance ID : uuid:69b93b6a-6c04-4b42-92ba-d7909176da3e Page Mode : UseOutlines Page Count : 8EXIF Metadata provided by EXIF.tools