Yamaha RX S600/RX S600D Easy Setup Guide S600 Esg UAB

User Manual: Yamaha RX-S600/RX-S600D Easy Setup Guide

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

RX-S600_S600D_esg_En.fm Page 1 Monday, May 20, 2013 2:18 PM

UAB

1 Preparation
AV Receiver

Accessories
Check that the following accessories are supplied with the product.
 Remote control

Easy Setup Guide
English

 Batteries (AAA, R03, UM-4) (x2)

Insert the batteries the right way
round.

 FM antenna (RX-S600)

To reduce the impact on natural resources, the Owner’s Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owner’s Manual on the supplied CD-ROM.
PDF versions of this guide and “Owner’s Manual” can be downloaded from the
following website.
http://download.yamaha.com/
[For U.S. customers only]
Visit the following website for additional information, FAQ’s, downloads such as
“Owner’s Manual” and product updates.
http://usa.yamaha.com/support/

 DAB/FM antenna
(RX-S600D)

 YPAO microphone

 Safety Brochure

 Easy Setup Guide

*The supplied FM antenna varies
depending on the region of
purchase.

 CD-ROM (Owner’s Manual)

This document explains how to set up a 5.1-channel system and play back
surround sound from a BD/DVD on the unit.

 AM antenna (RX-S600)

• The illustrations of the main unit and remote control used in this guide are of the RX-S600 (U.S.A.
model), unless otherwise specified.

Cables required for connections
The following cables (not supplied) are required to build the system described in this
document.
• Speaker cables (depending on the number of speakers)
• HDMI cable (x2)
• Audio pin cable (x1)
• Digital optical cable (x1) (not required if your TV supports ARC [Audio Return Channel])

RX-S600_S600D_esg_En.fm Page 2 Monday, May 20, 2013 2:18 PM

2 Placing speakers
Set up the speakers in the room using the following diagram as a reference.
For information on other speaker systems, refer to “Owner’s Manual”.

5
10° to 30°

1 Front speaker (L)
2 Front speaker (R)
3 Center speaker
4 Surround speaker (L)
5 Surround speaker (R)
9 Subwoofer

10° to 30°

RX-S600_S600D_esg_En.fm Page 3 Monday, May 20, 2013 2:18 PM

3 Connecting speakers/subwoofer
• Under its default settings, the unit is configured for 6-ohm
speakers. When connecting speakers with impedance of 8 ohm
or more, set the unit’s speaker impedance to “8  MIN”. For
details, see “Setting the speaker impedance” in “Owner’s
Manual”.

Connect the front speakers (1/2)
to the FRONT (//\) terminals.

Connect the center speaker (3) to the
CENTER terminal.

The unit (rear)

• Use a subwoofer equipped with built-in amplifier.
• Before connecting the speakers, remove the unit’s power cable
from the AC wall outlet and turn off the subwoofer.

The unit (rear)
SPEAKERS

FRONT

DC OUT
5V

CENTER

0.5A

EXTRA SP
SURROUND / ZONE 2
/BI-AMP

SPEAKERS

• Ensure that the core wires of the speaker cable do not touch
each other or come into contact with the unit’s metal areas. This
may damage the unit or the speakers. If the speaker cables
short circuit, “Check SP Wires” will appear on the front display
when the unit is turned on.

CENTER

0.5A

EXTRA SP
SURROUND / ZONE 2
/BI-AMP

VIDEO
SUBWOOFER
PRE OUT

FRONT

DC OUT

VIDEO
SUBWOOFER
PRE OUT

COMPONENT
VIDEO

MONITOR
OUT

COMPONENT
VIDEO

MONITOR
OUT

■ Connecting speaker cables
Speaker cables have two wires. One is for connecting the
negative (–) terminals of the unit and the speaker, and the
other is for the positive (+) terminals. If the wires are
colored to prevent confusion, connect the black wire to
the negative and the other wire to the positive terminals.
a Remove approximately 10
mm (3/8”) of insulation
from the ends of the
speaker cable and twist
the bare wires of the cable
firmly together.

+ (red)

– (black)
4

b Loosen the speaker terminal.

c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
d Tighten the terminal.

Using a banana plug
(U.S.A., Canada, China,
Australia and General
models only)
a Tighten the speaker
terminal.

Banana plug

b Insert a banana plug into the end of the terminal.

RX-S600_S600D_esg_En.fm Page 4 Monday, May 20, 2013 2:18 PM

Connect the surround speakers (4/
5) to the SURROUND (//\)
terminals.

Connect the subwoofer (9) to the
SUBWOOFER PRE OUT jack.

• Use a subwoofer equipped with built-in amplifier.

The unit (rear)

The unit (rear)
SPEAKERS

FRONT

DC OUT
5V

CENTER

0.5A

EXTRA SP
SURROUND / ZONE 2
/BI-AMP

SPEAKERS

CENTER

0.5A

EXTRA SP
SURROUND / ZONE 2
/BI-AMP

VIDEO

VIDEO
SUBWOOFER
PRE OUT

FRONT

DC OUT
FM

SUBWOOFER
PRE OUT

COMPONENT
VIDEO

MONITOR
OUT

COMPONENT
VIDEO

MONITOR
OUT

Audio pin cable

RX-S600_S600D_esg_En.fm Page 5 Monday, May 20, 2013 2:18 PM

4 Connecting external devices

Before connecting the power cable (General model only)
Make sure you set the switch position of
VOLTAGE SELECTOR according to your local voltage.
Voltages are AC 110-120/220-240 V, 50/60 Hz.

Audio out
(optical)

HDMI in

HDMI out
BD/DVD player

OPTICAL

HDMI

a Connect a BD/DVD player to the unit with an HDMI
cable.
If the BD/DVD player is currently connected to the
TV directly with an HDMI cable, disconnect the
cable from the TV and connect it to this unit.
b Connect a TV to the unit with the other HDMI cable.

HDMI OUT
jack

c Connect a TV to the unit with a digital optical cable.
This connection is required to play back TV audio
on the unit. This connection is not required if your
TV supports ARC (Audio Return Channel).

HDMI 1 jack
VOLTAGE SELECTOR
(General model only)

HDMI

ARC

(BD/DVD) HDMI 1

HDMI
OUT

d Connect the power cable to an AC wall outlet.

VOLTAGE
SELECTOR
110V

220V

120V

240V

• For information on how to connect radio antennas or other
external devices, see “PREPARATIONS” in “Owner’s Manual”.

NETWORK
HDMI
OUT

(BD/DVD) HDMI 1

ARC

HDMI 2

AV 4
OPTICAL

CONPONENT
VIDEO

HDMI 3

HDMI 5
1A

SPEAKERS

ANTENNA

AV 5

FRONT

DC OUT

(RADIO)

VIDEO

(NET)

MHL 5V

HDMI 4

AV 1

To an AC wall
outlet

EXTRA SP
SURROUND / ZONE 2
/BI-AMP

CENTER

0.5A

75
AUDIO 2

AUDIO OUT

VIDEO

AV 2

AV 3

COAXIAL

SUBWOOFER
PRE OUT

COAXIAL

COMPONENT
VIDEO

Turn on the unit, the TV and the BD/DVD
player.

Use the TV remote control to change the
TV input to video from the unit.

MONITOR
OUT

AUDIO 1
(TV)

VIDEO

Connect external devices to the unit.

The unit (rear)

AUDIO 1
(TV)

AUDIO 1 (OPTICAL) jack

The connections are complete. Proceed to the next
page to optimize the speaker settings.
INPUT

ZONE

VOLUME

DIRECT

INFO

SCENE
PHONES

YPAO MIC

STRAIGHT

PROGRAM

BD/DVD

SILENT CINEMA

NET

RADIO

VIDEO AUX

AUDIO

VIDEO

2.1A

• By connecting a TV to the unit with an HDMI cable, you can
configure the unit’s settings with the menu displayed on the TV. In
addition, you can select the on-screen menu language from English
(default), Japanese, French, German, Spanish, Russian, Italian and
Chinese. For details, refer to “Owner’s Manual”. In this guide,
illustrations of English menu screens are used as examples.

The unit (front)
Turn on the unit

RX-S600_S600D_esg_En.fm Page 6 Monday, May 20, 2013 2:18 PM

5 Optimizing the speaker settings automatically (YPAO)

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the
distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as
volume balance and acoustic parameters, to suit your room.

Connect the YPAO microphone to the
YPAO MIC jack on the front panel.
The following screen appears.
Auto Setup

• During the measuring process, test tones are output at high volume. Ensure that
the test tones do not frighten small children. Also, refrain from using this function at
night when it may be a nuisance to others.

Start

RECEIVER

SOURCE

RECEIVER

Exit

Press SETUP key
to Start

HDMI

• During the measuring process, you cannot adjust the volume.
• During the measuring process, keep the room as quiet as possible.

• Do not connect headphones.
• Do not stand between the speakers and the YPAO microphone during the
measurement process (about 3 minutes).
• Move to the corner of the room or leave the room.

Power Amp Assign
Basic

5
AUDIO

V-AUX

USB

NET

MAIN

PARTY

ZONE 2

VOL.

[SETUP]:Start

SCENE
BD
DVD

Preparing for YPAO

NET

RADIO

L
SL

SW
C

R
SR

The unit (front)
PROGRAM

Turn on the subwoofer and set
the volume to half. If the
crossover frequency is
adjustable, set it to maximum.

MUTE

TOP MENU

VOLUME

POP-UP/MENU

OPTION

SETUP

Cursor keys
ENTER

ENTER

VOLUME

CROSSOVER/
HIGH CUT
RETURN

DISPLAY
MEMORY

MODE

TUNING

MIN

MAX

MIN

MAX

YPAO microphone
Listening position

• To cancel the operation, disconnect the YPAO microphone, or
use the cursor keys to select “Exit” and press ENTER, before
starting the measurement.

SETUP

PRESET

To start the measurement, press SETUP.
The measurement will start in 10 seconds.
The following screen appears on the TV when
the measurement finishes.

SUR. DECODE STRAIGHT

MOVIE

MUSIC

ENHANCER

DIRECT

INFO

SLEEP

Auto Setup
Start
Exit

Measurement
Finished
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m

ENT

-3.0 / +10.0 dB

INPUT
TV VO
VOLL

Ear height

Place the YPAO microphone at your
listening position (same height as your
ears). We recommend the use of a
tripod as a microphone stand. You can
use the tripod screws to fix the
microphone in place.

MUTE

OK:ENTER

TTVV CH
CODE SET

VOL.

Finished

L
SL

SW
C

R
SR

RX-S600_S600D_esg_En.fm Page 7 Monday, May 20, 2013 2:18 PM

If “W-1:Out of Phase” appears
• If the cursor keys do not work, press RECEIVER and then use
the cursor keys.
• If any error message (such as E-1) or warning message (such
as W-2) appears, see “Error messages” or “Warning
messages” in “Owner’s Manual”.
• If the warning message “W-1:Out of Phase” appears, see “If
“W-1:Out of Phase” appears”.

Follow the procedure below to check the speaker
connections.

Auto Setup

Measurement
Finished

Start

Use the cursor keys (e/r) to select
“SAVE” (Save) and press ENTER.

Result

Exit

3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
OK:ENTER

Warning
message

W-1:Out of Phase
Auto Setup

Measurement
Finished

Start
Exit

SAVE

a Check for the blinking of the front display’s indicator to
identify the problem speaker.

Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB

Problem speaker (blinks)
VOL.

W-1:PHASE
VOL.

>SaveCancel

L
SL

SW
C

R
SR

L
SL

SW
C

R
SR

b Check the cable connections (+/-) of the problem
speaker.

If the speaker is connected correctly:

Disconnect the YPAO microphone from the
unit.

This completes optimization of the speaker settings.
• The YPAO microphone is sensitive to heat, so should not be
placed anywhere where it could be exposed to direct sunlight or
high temperatures (such as on top of AV equipment).

Depending on the type of speakers or room
environment, this message may appear even if the
speakers are connected correctly.
In this case, you can ignore the message.
Proceed to step 3.
If the speaker is connected incorrectly:
Turn off the unit, reconnect the speaker cable, and then
try YPAO measurement again.

RX-S600_S600D_esg_En.fm Page 8 Monday, May 20, 2013 2:18 PM

6 Playing back a BD/DVD
Now let’s play back a BD/DVD.
We recommend playing back multichannel audio
(5.1-channel or more) to feel surround sound produced
by the unit.

Many more features!
1

VOL.

HDMI1

RECEIVER

SOURCE

Press HDMI 1 to select “HDMI 1” as the
input source.
L
SL

SW
C

R
SR

HDMI

HDMI 1

5
AV

AUDIO

V-AUX

NET

USB
MAIN

2
3

Press STRAIGHT repeatedly to select
“STRAIGHT”.

VOL.

PARTY

ZONE 2

STRAIGHT

SCENE
BD
DVD

Start playback on the BD/DVD player.

NET

PROGRAM

MUTE

RADIO

VOLUME

L
SL

SW
C

R
SR

Volume -30.0dB

POP-UP/MENU

SETUP

OPTION

RETURN

SW
C

R
SR

MEMORY
MODE

TUNING

PRESET

INFO

SLEEP

SUR. DECODE STRAIGHT

ENHANCER

DIRECT

Sound is only being output from the front speakers
during multichannel audio playback
Check the digital audio output setting on the BD/DVD
player.
It may be set to 2-channel output (such as PCM).
No sound is coming from a specific speaker

INPUT
TV VOL
VOL

STRAIGHT

ENT

MUTE

Connect audio devices (such as CD player),
game consoles, camcorders, and many others.

Selecting the sound mode
Select the desired sound program (CINEMA
DSP) or surround decoder suitable for movies,
music, games, sports programs, and other uses.

Playing back from iPod
L
SL

If surround sound is not working

DISPLAY

MUSIC

Connecting other playback
devices

By using a USB cable supplied with iPod, you
can enjoy iPod music on the unit.

This completes the basic setup procedure.

ENTER

MOVIE

Please refer to “Owner’s Manual” on the supplied
CD-ROM to help you get the most out of the unit.

Press VOLUME to adjust the volume.
VOL.

TOP MENU

The unit has various other functions.

TV
TV CH
CODE SET

See “Troubleshooting” in “Owner’s Manual”.

■ Listening to FM/AM radio
(RX-S600)
■ Listening to DAB/FM radio
(RX-S600D)
■ Playing back music stored on
a USB storage device
■ Playing back the network
contents
■ Selecting the input source and
favorite settings at once
For more information, see “What you can do
with the unit”.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Modify Date                     : 2013:06:06 20:46:22+09:00
Create Date                     : 2013:06:06 20:46:22+09:00
Metadata Date                   : 2013:06:06 20:46:22+09:00
Format                          : application/pdf
Document ID                     : uuid:ac137b64-59dc-4475-b1b1-2e82567f7894
Instance ID                     : uuid:9ceecbbe-339e-444f-b2e9-caf4855d61eb
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 8

EXIF Metadata provided by EXIF.tools

Yamaha RX S600/RX S600D Easy Setup Guide S600 Esg UAB

Navigation menu

Versions of this User Manual:

Views

Navigation