Yamaha YHT 18 Quick Connect Connection Diagram YHT18QC

If not then YHT18QC Manual: ://www.yamaha.com/yamahavgn/s/YEC/Home_Theater_Systems/Connection_Diagram/YHT18QC

User Manual: Yamaha YHT-18 Connection Diagram

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

just add your TV and video source

1ST DRAFT

YHT-18
QUICK-CONNECT GUIDE

YHT-18 Q U I C K -C O N N E CT G U I D E
I NTRODUCTION
For the video portion, you will need a DVD player or
hi-fi stereo VCR and a television or monitor. Refer to the
Yamaha HTR-5440 Owner’s Manual, as well as those that
came with your other components, for complete instructions and cautions. Be sure to turn off all power while
making connections.

Yamaha developed the YHT-18 A/V Home Theater
package to turn your home into a theater. In addition to
enhancing the sound of a video source, like your TV,
DVD, or VCR, the YHT-18 also superbly reproduces
audio sources, such as a CD player or a cassette deck.
This Quick-Connect Guide will help you get started.
Study the speaker system plan (below), and then use
the interconnect diagrams (on the following pages) to
connect the receiver and speakers to your system.

Save this Quick-Connect Guide for future reference.
NOTE: Label the end of each speaker wire (i.e., left rear, right
front, etc.) before connecting them to the A/V receiver. For wire
runs over 30 feet, use larger 18- or 16-gauge speaker wire.

T OOLS A ND P ARTS
The YHT-18 Home Theater package consists of
(1) HTR-5440 A/V receiver with (1) universal remote
control, (4) 2-way NX-220P front/rear speakers,
(1) NX-C220 2-way center-channel speaker, (2) 49'
lengths and (3) 13' lengths of speaker wire, (1) 10' RCA
audio cable, speaker mounting-bracket hardware,
(1) SW-P201 Powered Subwoofer, and related owner’s
manuals. You will also need:

• Wire strippers (optional)
• Velcro (for secure fastening of NX-C220 on TV)
• Brackets, toggle bolts, molly anchor screws, or sheet
metal screws (for securing NX-220P speakers to walls)
NOTE: If you are unsure of how to securely and safely fasten
speakers to a wall, please contact a reliable source about the best
type of hardware for your particular wall's construction.
Secure installation is the purchaser's responsibility.

S PEAKER S YSTEM P LAN
SW-P201 Subwoofer (on floor)

NX-220P

Sub

(left side, same height as TV)

NX-C220

(right side, same height as TV)

(on top or below TV)

6'~ 8' apart

L = Left Channel
R = Right Channel
C = Center Channel
S = Surround Channel

Couch

Listening Area

S
NX-220P
(on stand or wall, at least
ear level or preferably higher)

8'~10' apart

NX-220P
(on stand or wall, at least
ear level or preferably higher)

YHT-18 Q U I C K -C O N N E CT G U I D E
C ONNECTING AUDIO C OMPONENTS
Yamaha HTR-5440 Receiver (Rear Panel)
DIGITAL
INPUT
CD

TUNER
AM ANT GND

–

SPEAKERS

–

FM ANT

MAINS

A
COAXIAL

UNBAL.

MAIN

OPTICAL
D-TV/CBL
6CH INPUT
MAIN
DVD

SURROUND
L

DVD

CENTER

D-TV/CBL

VIDEO SIGNAL
IN VCR 1 OUT

B
MONITOR OUT
SET BEFORE POWER ON

CENTER

AC OUTLETS
SWITCHED
100W MAX.
TOTAL

IMPEDANCE SELECTOR

VIDEO

R SUB WOOFER

MAIN A OR B: 8
A + B:16
CENTER
:8
:8
REAR

REAR
R (SURROUND) L

MAIN A OR B: 4
A + B: 8
:6
:6

CENTER
REAR

MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER

–
R

AUX

IN(PLAY) OUT(REC)
MD/CD-R

IN
D-TV/CBL
DVD
AUDIO SIGNAL

OUT

SUB
WOOFER
OUTPUT

VCR 1

NOTE: For your convenience, the Yamaha HTR-5440 receiver is equipped with
two switched ac outlets (100 W max.). If desired, use them to power on connected
components (e.g.,CD player) each time the receiver is turned on. However, do not
use them for components equipped with clocks (e.g.,VCR).

Cassette Deck,
CD or MD Recorder
* Use Playback Or Line Out
** Use Line In

CD Player (Changer)

L Out*

R Out*

L In**

R In**

L Out
R Out
L

Use RCA Audio Cables For Audio Interconnections

R
CD

IN(PLAY) OUT(REC)
MD/CD-R

RCA Cable Color Codes
Yellow = Video
White = Left Audio
Red = Right Audio

YHT-18 Q U I C K -C O N N E CT G U I D E
C ONNECTING T HE YHT-18 S PEAKERS
NX-220P
(Front Right Ch.)

SW-P201
(Subwoofer)

NX-220P
(Front Left Ch.)
Subwoofer Wiring

POWER
ON

OFF

VOLUME

STANDBY-RED
ON-GREEN

AUTO
STANDBY
HIGH
LOW
OFF

INPUT2

/MONO

INPUT1
FROM AMPLIFIER

OUTPUT
TO SPEAKERS

INPUT2

Stripe
Wire

/MONO

Stripe
Wire

To AC Outlet

RCA
Audio Cable

DIGITAL
INPUT
CD

COAXIAL

Yamaha HTR-5440
A/V Receiver
(Rear Panel)

TUNER
AM ANT GND

FM ANT

Main Speakers

−

+
MAINS

UNBAL.

OPTICAL
D-TV/CBL
6CH INPUT
MAIN
DVD

SURROUND
L

CENTER

DVD

D-TV/CBL

VIDEO SIGNAL
IN VCR 1 OUT

MONITOR OUT

SET BEFORE POWER ON

Surround

Cntr
R

AC OUTLETS
SWITCHED
100W MAX.
TOTAL

IMPEDANCE SELECTOR

VIDEO

+
−

R SUB WOOFER

+
−

MAIN A OR B: 8 MIN. /SPEAKER
A + B:16 MIN. /SPEAKER
CENTER
: 8 MIN. /SPEAKER
REAR
: 8 MIN. /SPEAKER
MAIN A OR B: 4 MIN. /SPEAKER
A + B: 8 MIN. /SPEAKER
CENTER
: 6 MIN. /SPEAKER
REAR
: 6 MIN. /SPEAKER

AUX

IN(PLAY) OUT(REC)
MD/CD-R

IN
DVD
D-TV/CBL
AUDIO SIGNAL

OUT
VCR 1

SUB
WOOFER
OUTPUT

Set IMPEDANCE Selector
to right position.

RED TERMINAL = (+)

❸

❶

❷
BLK TERMINAL = (–)

Stripe
Wire
Stripe
Wire

Stripe

❶ Strip 1 ⁄4 " off ends of speaker wires.
❷ Push and hold down levers.
❸ Insert speaker wires and

Stripe
Wire

release levers.

Speaker
Wiring
NX-220P
(Surround Right)

NX-C220
(Center Channel)

NX-220P
(Surround Left)

YHT-18 Q U I C K -C O N N E CT G U I D E
C ONNECTING V IDEO C ABLES FOR V IDEO C OMPONENTS
Yamaha HTR-5440 Receiver (Rear Panel)
DIGITAL
INPUT
CD

TUNER
AM ANT GND

–

SPEAKERS

–

FM ANT

MAINS

A
COAXIAL

UNBAL.

MAIN

OPTICAL
D-TV/CBL
6CH INPUT
MAIN
DVD

SURROUND
L

DVD

CENTER

D-TV/CBL

VIDEO SIGNAL
IN VCR 1 OUT

B
MONITOR OUT
IMPEDANCE SELECTOR

VIDEO

SET BEFORE POWER ON

CENTER

R SUB WOOFER

MAIN A OR B: 8
A + B:16
CENTER
:8
REAR
:8

REAR
R (SURROUND) L

MAIN A OR B: 4
A + B: 8
:6
:6

CENTER
REAR

MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER

AC OUTLETS
SWITCHED
100W MAX.
TOTAL

MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER

–
R

AUX

IN(PLAY) OUT(REC)
MD/CD-R

IN
DVD
D-TV/CBL
AUDIO SIGNAL

OUT

SUB
WOOFER
OUTPUT

VCR 1

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch
(on the VCR) to Line position to record from another source
connected to the Yamaha HTR-5440 receiver.

Monitor/TV
DVD Player
(or Video Game)

DVD

Video Out

D-TV/CBL

VIDEO SIGNAL
IN VCR 1 OUT

Optional 75-ohm
Coaxial Cable
ANT In

MONITOR OUT

VIDEO

Video In

Satellite Receiver
(or Cable Box)
Video Out

Hi-Fi Stereo VCR
Video In

Video Out

ANT Out
(RF Out)

Use RCA Video Cables And Jacks For Video Interconnections
RCA Cable Color Codes
Yellow = Video
White = Left Audio
Red = Right Audio

YHT-18 Q U I C K -C O N N E CT G U I D E
C ONNECTING A DVD P LAYER
Yamaha HTR-5440 Receiver (Rear Panel)
DIGITAL
INPUT
CD

TUNER
AM ANT GND

–

SPEAKERS

–

FM ANT

MAINS

A
COAXIAL

UNBAL.

MAIN

OPTICAL
D-TV/CBL
6CH INPUT
MAIN
DVD

SURROUND
L

CENTER

DVD

D-TV/CBL

VIDEO SIGNAL
IN VCR 1 OUT

B
MONITOR OUT
IMPEDANCE SELECTOR

VIDEO

SET BEFORE POWER ON

CENTER

R SUB WOOFER

MAIN A OR B: 8
A + B:16
CENTER
:8
REAR
:8

REAR
R (SURROUND) L

MAIN A OR B: 4
A + B: 8
:6
:6

CENTER
REAR

MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER

AC OUTLETS
SWITCHED
100W MAX.
TOTAL

MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER

–
R

AUX

IN(PLAY) OUT(REC)
MD/CD-R

IN
DVD
D-TV/CBL
AUDIO SIGNAL

OUT
VCR 1

SUB
WOOFER
OUTPUT

VIDEO SIGNAL
DVD

DIGITAL
INPUT
CD

Use an RCA Video Cable And Jacks
For Video Interconnections

COAXIAL
OPTICAL
D-TV/CBL

OR
(see note)

DVD

R
Digital Audio Out
(Optical)

Digital Audio Out
(Coaxial)

DVD
AUDIO SIGNAL

Mixed Audio R Out
Mixed Audio L Out
RCA Cable Color Codes

DVD Player
Video Out
NOTE: Your DVD player may have optical and coaxial digital-audio outputs.
For optical connections, use an optical cable (available from your local audio
dealer) to connect the optical output on the DVD player to the optical input,
labeled DVD, on the the HTR-5440 receiver (see detail above).
For coaxial connections, use an RCA cable (available from your local audio
dealer) to connect the RCA coaxial output on the DVD player to the coaxial
input, labeled DIGITAL INPUT CD, on the HTR-5440 receiver (see detail above).
Then rename the digital input on the HTR-5440 to “DVD” (see the HTR-5440
Owner’s Manual for the procedure).

Yellow = Video
White = Left Audio
Red = Right Audio

YHT-18 Q U I C K -C O N N E CT G U I D E
C ONNECTING AUDIO C ABLES F OR V IDEO C OMPONENTS
Yamaha HTR-5440 Receiver (Rear Panel)
DIGITAL
INPUT
CD

TUNER
AM ANT GND

–

SPEAKERS

–

FM ANT

MAINS

A
COAXIAL

UNBAL.

MAIN

OPTICAL
D-TV/CBL
6CH INPUT
MAIN
DVD

SURROUND
L

DVD

CENTER

D-TV/CBL

VIDEO SIGNAL
IN VCR 1 OUT

B
MONITOR OUT
SET BEFORE POWER ON

CENTER

AC OUTLETS
SWITCHED
100W MAX.
TOTAL

IMPEDANCE SELECTOR

VIDEO

R SUB WOOFER

MAIN A OR B: 8
A + B:16
CENTER
:8
REAR
:8

REAR
R (SURROUND) L

MAIN A OR B: 4
A + B: 8
:6
:6

CENTER
REAR

MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER

–
R

AUX

IN(PLAY) OUT(REC)
MD/CD-R

IN
DVD
D-TV/CBL
AUDIO SIGNAL

OUT
VCR 1

SUB
WOOFER
OUTPUT

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line switch (on the VCR) to Line
position to record from another source connected to the Yamaha HTR-5440 receiver.

Hi-Fi Stereo VCR
Audio
L Out

DVD Player
(or Video Game)

Audio L Out
Audio R Out

Audio
R Out

Audio
L In

Audio
R In

L
R
IN
DVD
D-TV/CBL
AUDIO SIGNAL

OUT
VCR 1

Audio L Out

Satellite
Receiver

Audio R Out
Use RCA Audio Cables And Jacks For Audio Interconnections
RCA Cable Color Codes
Yellow = Video
White = Left Audio
Red = Right Audio

YHT-18 Q U I C K -C O N N E CT G U I D E
C ABLE H OOK -U P (B ASIC A ND P REMIUM C HANNELS )
Yamaha HTR-5440 Receiver (Rear Panel)
DIGITAL
INPUT
CD

TUNER
AM ANT GND

–

SPEAKERS

–

FM ANT

MAINS

A
COAXIAL

75 UNBAL.

MAIN

OPTICAL
D-TV/CBL
6CH INPUT
MAIN
DVD

SURROUND
L

CENTER

DVD

D-TV/CBL

VIDEO SIGNAL
IN VCR 1 OUT

B
MONITOR OUT
IMPEDANCE SELECTOR

VIDEO

SET BEFORE POWER ON

CENTER

R SUB WOOFER

MAIN A OR B: 8
A + B:16
CENTER
:8
REAR
:8

REAR
R (SURROUND) L

MAIN A OR B: 4
A + B: 8
:6
:6

CENTER
REAR

MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER

AC OUTLETS
SWITCHED
100W MAX.
TOTAL

MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER
MIN. /SPEAKER

–
R

AUX

IN(PLAY) OUT(REC)
MD/CD-R

OUT

IN
DVD
D-TV/CBL
AUDIO SIGNAL

SUB
WOOFER
OUTPUT

VCR 1

NOTE: When using a hi-fi stereo VCR, set the Tuner/Line
switch (on the VCR) to Line position to record from another
source connected to the Yamaha HTR-5440 receiver.

Hi-Fi Stereo VCR

ANT In

Basic Cable
(From Wall Jack)

Video In
VIDEO SIGNAL
IN VCR 1 OUT

Video Out
Audio
L Out

Audio
R Out

Audio
L In

Audio R In

RCA Video Cables

RCA Audio Cables

L
R
IN

RCA Audio Cables

Premium Cable
(From Wall Jack)

OUT
VCR 1

Descrambler
Hi-Fi Stereo VCR
(Tuner set to Channel 3 or 4)

Converter
Box
(Channel 3 or 4
Output)

ANT In

Video In
VIDEO SIGNAL
IN VCR 1 OUT

Video Out
Audio
L Out

Audio
R Out

Audio
L In

Audio R In

RCA Video Cables

RCA Audio Cables

L
R
IN

RCA Audio Cables
RCA Cable Color Codes
Yellow = Video
White = Left Audio
Red = Right Audio

OUT
VCR 1

YHT-18 Q U I C K -C O N N E CT G U I D E
I NITIAL A DJUSTMENT OF T HE SW-P201 S UBWOOFER
To achieve the optimum volume balance between the
SW-P201 Subwoofer and the NX-220P Main Speakers,
perform the following procedure:
1. Insert the SW-P201’s power plug into a nearby ac outlet.
2. Set the SW-P201’s VOLUME control to 0 (minimum
setting), the AUTO STANDBY switch to HIGH, and
the HIGH CUT switch to LOW.
3. Press the SW-P201’s POWER switch to ON and
power on all other components.

4. Play an audio source and adjust the HTR-5440’s
VOLUME control to a desired listening level.
5. On the SW-P201, increase the volume gradually to
adjust the balance the volume between the SW-P201
Subwoofer and the NX-220P Main Speakers.
NOTE: Once the volume is balanced between the
subwoofer and the main speakers, you can adjust the
volume of your whole sound system by using the
HTR-5440's VOLUME control.

SW-P201 Subwoofer
(Rear Panel)
POWER
POWER
ON

OFF

VOLUME

OFF

❸

VOLUME

STANDBY-RED
ON-GREEN
STANDBY-RED
ON-GREEN

0
AUTO
STANDBY

HIGH
LOW
OFF

HIGH
LOW
HIGH CUT

INPUT2

/MONO

AUTO
STANDBY
HIGH
LOW
OFF

HIGH
LOW
HIGH CUT

INPUT1
FROM AMPLIFIER

OUTPUT
TO SPEAKERS

❶

❷

To AC Outlet

YHT-18 Q U I C K -C O N N E CT G U I D E
P ROGRAMMING T HE U NIVERSAL R EMOTE C ONTROL
S ETTING U P C OMPONENTS
Indicator LED
Component
Selector
Buttons

Perform the procedure for each component you own.
At the end of each step 5, the remote control’s processor
will automatically assign the selected component’s
control functions to its own buttons, ready for your use.

S ETTING U P Y OUR TV
Turns On
Component’s
Power

2. On the remote control, press TV.

Use Keypad
To Enter
Setup Codes

Use To Enter
Setup Mode

1. Turn on the television set and look up a setup code
for your brand of television (codes are located at the
back of the HTR-5440 Owner’s Manual).

Use To Enter
Setup Mode
3. Press and hold both VOLUME buttons at least four
seconds until the indicator LED flashes twice.

4. Using the keypad, enter the four-digit setup code.
The indicator LED will flash twice after your entry.
If the LED did not flash twice, repeat steps 3 and 4.
The YHT-18 Home Theater package includes a universal remote control. It comes pre-programmed with
factory codes to control your HTR-5440 receiver and
most Yamaha audio components. To program other
brands of components (i.e., TV, VCR, etc.) or if your
Yamaha unit does not respond, you will need to
program the remote control with the manufacturer’s
codes (listed on the back pages of the HTR-5440
Owner’s Manual).
NOTE: The universal remote control is designed to control
most major brands of audio and video components. For other
units, use the original remote control supplied with the product.

P OWER O N
1. Load the supplied batteries into the remote control.
2. Aim the remote control at the receiver, press AMP/
TUNER, and then press POWER.
3. The receiver should turn on.

5. To verify the code works, aim the remote control at
the television set, press TV, and then press POWER.
The television set should turn off. If it doesn’t
respond, use another code for the same manufacturer and repeat steps 3 through 5.

YHT-18 Q U I C K -C O N N E CT G U I D E
P ROGRAMMING THE UNIVERSAL R EMOTE C ONTROL (C ONTINUED )
S ETTING U P Y OUR C ABLE B OX ( OR DSS)

S ETTING U P Y OUR DVD ( OR LD) P LAYER

1. Turn on the cable box (or DSS) and look up a setup
code for your brand of cable box (or DSS) (codes are
located at the back of the HTR-5440 Owner’s Manual).

1. Turn on the DVD (or LD) player and look up a
setup code for your brand of DVD (or LD) player.
2. On the remote control, press DVD/LD.

2. On the remote control, press CBL/SAT.

3. Press and hold both VOLUME buttons at least four
seconds until the indicator LED flashes twice.
4. Using the keypad, enter the four-digit setup code.
The indicator LED will flash twice after your entry.
If the LED did not flash twice, repeat steps 3 and 4.
5. To verify the code works, aim the remote control at
the cable box (or DSS), press CBL/SAT, and then
press POWER. The unit should turn off. If it doesn’t
respond, use another code for the same manufacturer and repeat steps 3 through 5.

S ETTING U P Y OUR VCR
1. Turn on the VCR and look up a setup code for your
brand of VCR.
2. On the remote control, press VCR.

3. Press and hold both VOLUME buttons at least four
seconds until the indicator LED flashes twice.
4. Using the keypad, enter the four-digit setup code.
The indicator LED will flash twice after your entry.
If the LED did not flash twice, repeat steps 3 and 4.
5. To verify the code works, aim the remote control at
the DVD (or LD) player, press DVD/LD, and then
press POWER. The unit should turn off. If it doesn’t
respond, use another code for the same manufacturer and repeat steps 3 through 5.

S ETTING U P O THER C OMPONENTS
1. Turn on the component (e.g., CD player, tape deck,
or MD player) and look up a setup code for your
brand of component.
2. On the remote control, press the desired component
button (e.g., CD or TAPE/MD).
3. Press and hold both VOLUME buttons at least four
seconds until the indicator LED flashes twice.
4. Using the keypad, enter the four-digit setup code.
The indicator LED will flash twice after your entry.
If the LED did not flash twice, repeat steps 3 and 4.

5. To verify the code works, aim the remote control at the
component, press the appropriate component button,
and then press POWER. The unit should turn off. If it
doesn’t respond, use another code for the same
manufacturer and repeat steps 3 through 5.

5. To verify the code works, aim the remote control at
the VCR, press VCR, and then press POWER. The
VCR should turn off. If it doesn’t respond, use
another code for the same manufacturer and repeat
steps 3 through 5.

YHT-18 Q U I C K -C O N N E CT G U I D E
O PERATING T HE UNIVERSAL R EMOTE C ONTROL
O VERVIEW

3. Load a DVD (or LD) into the DVD (or LD) player.

The universal remote control will control up to seven
different types of components (including the HTR-5440
receiver), each of which becomes active when you press
a selection (e.g., TV, VCR, etc.). We can only briefly
describe some functions here, and we encourage you
use the HTR-5440 Owner’s Manual to gain additional
experience with this powerful unit.

4. Aim the remote control at the DVD (or LD) player,
and press > (forward button) to start play.

P LAYING A V IDEOCASSETTE

You can reset the remote control to factory codes for
all components or a desired component, as follows:

1. Aim the remote control at the HTR-5440, press
AMP/TUNER to select the component, and then
press POWER to turn the receiver on. Press VCR (i.e.,
6 on the keypad) as the input for the receiver.

NOTE: The DVD player’s controls are now assigned to
the remote control buttons, since DVD was the last
selected component.

R ESETTING THE R EMOTE C ONTROL TO F ACTORY C ODES
R ESETTING C ODES F OR A LL C OMPONENTS
1. Press any component selector button other than
AMP/TUNER.

2. Aim the remote control at the TV, press the TV to
select the component, and then press POWER to
turn the television on. Press TV INPUT (or A/B) to
select the correct input.

2. Press and hold both VOLUME buttons at least four
seconds until the indicator LED flashes twice.

3. Aim the remote control at the VCR, press VCR to
select the component, and then press POWER to turn
the VCR on. Put a tape in the VCR, press PLAY.

4. The indicator LED will flash twice to confirm all
codes have been reset to factory values. If the LED
does not flash twice, repeat steps 1 through 3.

NOTE: At this point, the VCR controls are assigned to the
remote control, since VCR was the last selected component. If you now press the VOLUME up (down) buttons,
the TV/VCR volume will be raised (or lowered). To adjust
the receiver’s volume, you must press AMP/TUNER to
activate its functions.

3. Using the keypad, enter the code “9990”.

R ESETTING C ODES F OR A D ESIRED C OMPONENT
1. Press a component selector button that matches the
component you wish to reset to factory codes.
2. Press and hold both VOLUME buttons at least four
seconds until the indicator LED flashes twice.
3. Using the keypad, enter the code “0000”.

P LAYING A DVD
1. Aim the remote control at the HTR-5440, press AMP/
TUNER to select the component, and then press
POWER to turn the receiver on. Press DVD (i.e.,
4 on the keypad) as the input for the receiver.
NOTE: If the DVD player is connected to an external
decoder, press 6CH INPUT (i.e., 9 on the keypad) as the
input for the receiver.
2. Press DVD/LD and then press POWER to turn the
DVD (or LD) player on.
NOTE: If the DVD player is plugged into the switched ac
outlet (on the back of the receiver) and its power switch
was already engaged, the unit will come on each time the
receiver is powered on.

4. The indicator LED will flash twice to confirm all
codes have been reset to factory values. If the LED
does not flash twice, repeat steps 1 through 3.
5. For your convenience, the following reference chart
lists the factory codes:
Component
Selector Button

Component

Code

TV
CBL/SAT
VCR
DVD/LD
CD
TAPE/MD

TV
Cable TV
VCR
DVD player
CD player
MD recorder

0101
0006
0002
0008 Yamaha
0005 Yamaha
0024 Yamaha

©2001 YAMAHA ELECTRONICS CORPORATION, USA
6660 Orangethorpe Avenue, Buena Park, CA 90620
PH: (714) 522-9105; FAX: (888) 435-7922
http://www.yamaha.com

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Annotate, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2001:03:26 12:33:55
Producer                        : Acrobat Distiller 4.0 for Macintosh
Author                          : Roman
Creator                         : Adobe¨ PageMaker¨ 6.5: AdobePS 8.5.1
Title                           : YHT-18 Quick-Connect
Modify Date                     : 2001:05:10 14:45:42-07:00
Page Count                      : 12

EXIF Metadata provided by EXIF.tools

Yamaha YHT 18 Quick Connect Connection Diagram YHT18QC

If not then YHT18QC Manual: ://www.yamaha.com/yamahavgn/s/YEC/Home_Theater_Systems/Connection_Diagram/YHT18QC

Navigation menu

Versions of this User Manual:

Views

Navigation