Yamaha Tenor Drum Assembly Guide
User Manual: Yamaha Yamaha Tenor Drum Assembly Guide
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Yamaha Marching Toms and Randall May Free Floating Lug Bridge TM A S S E M B LY I N S T R U C T I O N S PRE-ASSEMBLY Materials needed for assembly: n Phillips screwdriver n 7 n FFLB™ = Free Floating Lug Bridge ⁄16" Adjustable wrench (ratcheting socket wrench preferred) • Metal bridges are pre-installed and take the place of a normal lug casing. • Black spacers are pre-installed onto shells. Please be careful when using tools. Bridges (top) and spacers Have you ordered a carrier with the drums? 4 YES: Assembly can proceed. NO: Assembly CANNOT proceed. The carrier’s tom rail is essential for continuing the assembly of these drums. RM-ABS-Q RM-FC-Q Tom rail 1 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions ASSEMBLY 1 2 Open boxes. n Remove the drum shells from the smaller boxes. n Do not open bag of extra parts — save for later. n Set aside heads, rims and tension rods for later assembly. Find your marching tom configuration (pg. 5-8) and refer to it for assembly. A n FFLBs have been pre-installed on your drums (image A). n Lay out the shells as shown in the configuration diagram. n Nestle the Yamaha lug casing inside the FFLBs (image B). n Attach the casing to the shell utilizing the black screws and washers. B 2 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions 3 Attach the 6" or 8" space spock drum. n Your extra 6" or 8" or both will have a pre-installed metal bridge (image C). These bridges take the place of the regular Yamaha lug casing. n Attach the metal bridge to the corresponding shell as shown in your configuration diagram. n Locate the bag of bolts, washers and nuts with sprocket (image D). n Place your 6" or 8" or both on a flat surface within your drum array configuration so you can connect them to the correct corresponding shell. • Insert the bolts through the holes in the shell. • Slide the channel of the bridge down the bolt head. • Fasten the nut on the inside of the shell (image D). NOTE: The height of the bridge is important. Image D shows the top half of the bolt head. This is the ideal height for the bridge on both shells. C D 3 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions E 4 Attach the back rail to the outer drums. n Locate the bag of bolts, washers and nuts without the sprocket. n Insert bolts into the opening channels on both sides of back rail (images E and F). • The bolt head should face out of the channel. F • Place the washer on the bolt and loosely tighten the nut. n Repeat on the other side (try to insert both sides of the rail simultaneously so that it’s even). n Once the rail is in place, tighten using the 7⁄16" wrench. Assembly before back rail. Assembly with back rail. Images show drums without heads, hoops and tension rods. 4 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions MQT-8023 TOP VIEW BADGE RMLB-S 1 6 10 5 5 2 8 4 8 4 1 1 2 3 3 7 8 2 7 2 13 12 6 3 5 Tom Rail Lug casings that should be inserted into FFLB: 8": 2, 4 12": 7 10": 2, 4 13": 2 MQT-668023 Lug casings replaced with metal bridge: 12": 6 13": 3 TOP VIEW 1 6 10 5 5 2 4 1 1 8 4 2 3 3 7 2 13 RMLB-SS60 3 8 1 RMLB-SS68 7 1 4 6 5 4 BADGE RMLB-L RMLB-SS60 RMLB-SS68 8 3 6 4 5 1 6 3 2 1 4 12 6 2 3 2 3 6 4 5 Tom Rail Lug casings that should be inserted into FFLB: 8": 2, 4 12": 7 10": 3, 5 13": 2 Lug casings replaced with metal bridge: 6": 1 L12": 6 6": 1 L13": 3 NOTE: The badge on the 6" drums should face the rail or the player side (as close as possible). 5 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions 4 TOP VIEW BADGE MQT-68023 RMLB-S RMLB-SQ68 1 6 10 5 5 2 8 4 8 4 1 2 3 3 RMLB-SQ68 7 1 8 2 7 1 4 13 2 6 6 3 3 12 2 3 6 4 5 5 Tom Rail Lug casings that should be inserted into FFLB: 8": 2, 4 12": 7 10": 2, 4 13": 2 Lug casings replaced with metal bridge: 6": 1 12": 6 8": 3 13": 3 MQT-0234 8 NOTE: The badge on the 6" drums should face the rail or the player side (as close as possible). TOP VIEW 1 7 3 6 1 5 4 1 6 2 12 8 4 BADGE RMLB-L 10 5 4 2 3 2 7 8 1 7 2 14 13 3 6 5 1 5 Tom Rail 4 Lug casings that should be inserted into FFLB: 10": 3, 5 13": 7 12": 3, 5 14": 2 3 6 Lug casings replaced with metal bridge: 13": 6 14": 3 6 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions 4 TOP VIEW BADGE MQT-60234 RMLB-L RMLB-LQ62 8 1 7 12 8 1 5 2 7 4 4 8 2 13 2 Lug casings that should be inserted into FFLB: 10": 3, 5 13": 7 12": 3, 5 14": 2 3 6 4 5 Tom Rail 4 1 7 6 3 3 Lug casings replaced with metal bridge: 6": 4 13": 6 12": 4 14": 3 NOTE: The badge on the 6" drums should face the rail or the player side (as close as possible). TOP VIEW BADGE MQT-660234 RMLB-L RMLB-LS60 RMLB-LS62 8 1 7 1 6 2 12 1 5 2 7 14 4 3 4 RMLB-LS62 2 3 8 7 6 3 Lug casings that should be inserted into FFLB: 10": 3, 5 13": 7 12": 3, 5 14": 2 2 1 4 13 6 2 3 2 Lug casings replaced with metal bridge: 6": 4 6": 1 13": 6 10": 4 12": 4 14": 3 3 6 5 Tom Rail 4 1 RMLB-LS60 1 4 6 10 5 3 6 5 3 1 4 6 8 2 RMLB-LQ62 14 5 10 5 3 6 1 6 2 NOTE: The badge on the 6" drums should face the rail or the player side (as close as possible). 7 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions 4 MQT-80234 TOP VIEW BADGE RMLB-L RM-68: Drilled Spacers 8 1 7 1 6 2 12 8 1 5 RM-68 4 5 2 7 8 1 2 2 13 3 6 3 Lug casings that should be inserted into FFLB: Lug casings replaced with metal bridge: 13": 6, 7 14": 2, 3 NOTE: This configuration will be drilled for the 8" to attach on the 10" and 12". 13": 6 14": 3 MQT-680234 4 5 Tom Rail 4 TOP VIEW BADGE RMLB-L RMLB-LS82 RMLB-LS60 8 1 7 1 6 2 12 3 6 8 3 1 3 10": 3, 5 12": 3, 5 4 8 4 5 2 7 14 6 10 5 3 6 1 5 LS82 4 5 14 3 6 4 2 3 8 1 LS60 2 7 10 5 4 7 1 8 4 2 6 3 2 1 2 13 3 6 3 5 5 4 4 Tom Rail Lug casings that should be inserted into FFLB: 10": 3, 5 13": 7 12": 3, 5 14": 2 Lug casings replaced with metal bridge: 6": 4 10": 4 13": 6 8": 1 12": 4 14": 3 NOTE: The badge on the 6" and 8" drums should face the rail or the player side (as close as possible). 8 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions Inside back cover (blank) 12 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Page Count : 12 Modify Date : 2019:05:02 18:06:16+09:00 Create Date : 2019:02:25 11:07:23 Creator : PDFium Producer : PDFiumEXIF Metadata provided by EXIF.tools