Yifang Digital Technology XN680 Mobile Digital Pen User Manual

Shenzhen Yifang Digital Technology Co., Ltd. Mobile Digital Pen

User manual

1 Accessories z Receiver ● USB Cable(Mini + Micro) ● Digital Pen（XN510） z Ink Refill ● Refill Extractor ● User Manual Overview of Receiver A. Clip- Holds paper of Size A4 (default). B. Reset hole- Reset the device. C. Power button- Press to turn on/off the device. D. Micro USB port- Connects to Micro USB cable for charging. E. LED indicator- Indicate the various working status of the device. Note: For the sake of power saving, usually only one LED indicator will light to indicate related statuses at one time: Power on: two LEDs blink once; Charging: red LED blinks briefly; Fully charged: red LED lights for a while； Low battery: red LED blinks slowly； Standby: green LED blink slowly； Writing: green LED blink briefly；
Digita F．MCocaNote： G．Cwhen Note：the R WDo nomalfu 一、 1.InsNote: long X 2.Rep123 1）al Pen Mini USB port onnects to PC viaable for charging.：Disconnect theCharging indican charging comp：Please use theReceiver and theHowWARNING: ot attempt to openction. Getting prtalling an Ink RMake sure you X 2.35mm diameplace the refill ）Remove the c）Use the extrac） Slightly pull t Slide the newof the pen. a Mini USB . e USB cable wheator: Lights redpletes; blinks once dedicated USB e pen. w to Useen the pen. This repared Refill into the Puse a refill that ieter). with the extraccap off the pen;ctor to hold the rehe old refill out.w refill into the tip 2 en the device hasd when chargince the battery is cable provided toe the Digmay cause the pPen s similar to the o ctor efill; 2s charged for abong is going on low. ogether with this gital Penpen to original (standard）Gently pressrefill until it issecurely in pout 2 hours. and goes out pen to connect d refill (67.0mm s the new s lodged place.
二、 1.Sysyy 2. Ru a) A b) c) As Software Astem requirementy iPhone 4s /iPy Android 4.3 on the applicationUser can downloAppStore, Googand install it; Find the “Clouddevice before tapAfter opening thescreen to find ouApplication ts： Pad3 or above（wor above, with BLn “CloudMemo+”：oad the applicatile Play, Android Memo+” icon onpping to open it.e app, select andut the BT device y 3 with iOS7.0 or abLE4.0； ： ion “CloudMemoMarket or by scn the app menu d tap on the “Scayou are using.bove）； o+” to your mobilcanning the two-dscreen of the Aan” button on thee devices from dimention code Android or iOS top right of the
4 d) Tap on the device name that is identical with that on the bar code of the receiver from the found device list, and then enter note-taking mode. At the bottom of the screen, there will appear some words “device connected successfully, ready to take notes”. You can take note now. e) Fix the receiver on the top-center a piece of paper in size A4. Hold the pen and write as usual. Whatever you write or draw with the pen will be displayed on the screen of your mobile device. Note: 1. Do not block the signal transmission between the pen tip and the receiver. 2.Make sure the pen is at least 1.5cm away from the receiver so that the sensor can work normally.。 3. Be sure to write with proper force to guarantee the high identification of the writing. f) After writing or drawing, tap on “Save” button to save your note.
5 g) Tap on “Note” icon on the top right corner to check your recent notes. 三、 Description of the interfaces Management：Modify the name of device or get back to device list. Note：Check all notes that have been saved or uploaded. Share: Upload your notes to social networks. Management Notes Upload
6 Remarks: To share your notes, please make sure your mobile device is connected to the Internet. Pen: Select the options of pen width. Wallpaper: Change the wallpaper (background) of your notes. Eraser: Erase paticular part of your writing or drawing, or clear the whole page. Color: Change the color of your ink. Photo: Take photos or load an existing picture for editing or to set as wallpaper. Save：Save your current note.
7 FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu