Yinrun Industry Q13 RC DRONE User Manual Q13 manual

Guangdong Yinrun Industry Co., LTD. RC DRONE Q13 manual

User manual

QuadcopterParts name and direction defineHeliXQUADROTOR SERIESQuadcopter FuselageB PropellerA Propeller B PropellerA PropellerHeliXQUADROTOR SERIESRED LIGHTNO.Q13PREFACESAFETY PRECAUTIONPRODUCT INTRODUCTION           Quadcopter(with rechargeable battery)TransmitterA PropellerB PropellerUSB CableInstruction Manual4your Quadcopter.Do not usePlug the USB charger into the Power Socket and connectthe USB port into the charger(As Fig.6), the red indicatorof the USB will keep eternal bright.Please use the USB’sanother side to connect the Battery Plug(As Fig. 7), thelight on the USB will be Red.When finished the charging,the light will be off.Please insert the USB line’s port into the computer (As Fig. 4) and use another side of USB to connectthe Battery Plug (As Fig. 5), and then the light on the USB is Red;When the charging is finished, the light will be off.The Quadcopter can fly about 6 minutes after charging about 40 minutes.HeliXQUADROTOR SERIESBattery Assembly & Charging InstructionHeliXQUADROTOR SERIESOpen the battery cover to disconnect the Battery Plug and Circuit board Port, and pull the rechargeable Li-battery out (As Fig.9).HeliXQUADROTOR SERIESHeliXQUADROTOR SERIESTo find a place to fly Replacing the batteryControl methodHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESQuadcopterQuadcopterQuadcopterQuadcopterQuadcopterCheck the Quadcopter regularly to make sure it’s in good shape.Repair immediately when the Quadcopter is damaged or outof shape.(If the rotor is seriously broken, do not fly the product,or else it may cause some accident.)When the quadcopter has run out of electricity or being placedfor 3 months, please timely charge it for 20 minutes and thenunplug it and keep it well. Control methodNoticeMaintenanceTrouble manageNew 1.5V “AA” alkaline batteries, for the transmitter to(1). Propeller can’t move(2). Suddenly stop and drop down when flying(1). ON/OFF switch is OFF(2). Run out of power(1). Turn the power on.(2). Recharge the Quadcopter or       change the transmitter’s batteries.(1). No response from theQuadcopter(2). The Quadcopter can’t be hovering normally(1). The quadcopter fails to be decoded.(2).The band of the transmitter doesn’tcorrespond to the decoding of theQuadcopterAdjust the band on the transmitter and keepit the same as the Quadcopter.Please makedecoding once again by the following Step(3) or (4)                                mentioned in the Instrunction Manual.(5) In the normal, you can fly the quadcopter according to the its default Flying direction that’s Green Lights indicate the Flying Front-side and Red Lights indicate the Flying Back-side; Meantimes, the LCD screen of the transimitter will show Mode 1; (2) Transmitter      Left Throttle(Up/Down/Left-turn /Right-turn)Right Throttle      Power switch lnstruction lightFine-tuning Button(for Forward/Backward)     LED Switch(Light On/Off)   Speed Switching Button(Low/Middle/High Speed)Auto-clockwise Spinning ButtonFlip Switching Button(Flip Mode)    Headless Button “HeliX” Logo for Item No. Q13  LCD Screen for Item No. Q13sHeliXQUADROTOR SERIESHeliXQUADROTOR SERIES(Fig.12)Power Switch(On/Off Button)     Fine-tuning Button(for Left-turn/Right-Turn)    One Button ReturnHeliXQUADROTOR SERIESFine-tuning Button(for Left-side/Right-side Flight)① Forward  (Forward Filp Mode)② Backward (Backward Filp Mode)  ③ Left-side Flight (Left-side Filp Mode)④ Right-side Flight (Right-side Filp Mode)NO.Q13sGREEN LIGHTFRONT BLUE LIGHT15CM15CMMovingForwardMovingbackwardHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESMovingLeftwardMovingRightwardFig. 13HeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESDefault Mode LED OFF LED ON0M 3M 6MHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESAuto-clockwise SpinningHeliXQUADROTOR SERIESFig 15Left Flip ModeLEFT FLIPForward  Flip ModeBackward Flip ModeRight Flip ModeCH%TXMODE 2Fig. 14HeliXQUADROTOR SERIESMovingLeft-SpinMovingRight-Spin             The Quadcopter Front Side(The Headless Flying Front-side denifition )HeliXQUADROTOR SERIESFig 16HeliXQUADROTOR SERIESFig 17Fig 18LCD screen is for Q13SSlow Speed ModeMiddle Speed Mode High Speed ModeHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESHeliXQUADROTOR SERIESCH%TXCH%TXCH%TXCH%TXCH%TXCH%TXHere’s the Flying tips for your reference:HeliXQUADROTOR SERIESWarning:  Changes or modifications to this unit not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.NOTE:  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference ina residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help. “The device must not be co-located or operating in conjunction with any other antenna or transmitter.”FCC COMPLIANCE INFORMATION STATEMENT (U.S)

Navigation menu