York Millennium Ycas0130 Users Manual 201.19 NM1 (204)

2015-02-02

• 201.19-NM1
• SECTION 1 - GENERAL CHILLER INFORMATION & SAFETY
  • INTRODUCTION
  • WARRANTY
  • SAFETY
  • RESPONSIBILITY FOR SAFETY
  • ABOUT THIS MANUAL
  • MISUSE OF EQUIPMENT
• SECTION 2 - PRODUCT DESCRIPTION
  • INTRODUCTION
  • MOTOR STARTING
  • KEYPAD CONTROLS
  • ACCESSORIES AND OPTIONS
  • DX EVAPORATOR AND STARTER OPTIONS
  • UNIT ENCLOSURES OPTIONS
  • FAN OPTIONS
  • SOUND REDUCTION OPTIONS
  • VIBRATION ISOLATION
  • UNIT NOMENCLATURE
  • YORK INTERNATIONAL PRODUCT IDENTIFICATION NUMBER (PIN)
• SECTION 3 - HANDLING AND STORAGE
  • DELIVERY AND STORAGE
  • INSPECTION
  • MOVING THE CHILLER
  • UNIT RIGGING
• SECTION 4 - INSTALLATION
  • LOCATION REQUIREMENTS
  • OUTDOOR INSTALLATIONS
  • INDOOR INSTALLATIONS
  • LOCATION CLEARANCES
  • COMPRESSOR FEET BOLT REMOVAL
  • VIBRATION ISOLATORS
  • SHIPPING BRACES
  • PIPEWORK CONNECTION
  • WATER TREATMENT
  • PIPEWORK ARRANGEMENT
  • CONNECTION TYPES & SIZES
  • EVAPORATOR CONNECTIONS
  • REFRIGERANT RELIEF VALVE PIPING
  • DUCTWORK CONNECTION
  • ELECTRICAL CONNECTION
  • POWER WIRING
  • STANDARD UNITS WITH MULTI POINT POWER SUPPLY WIRING
  • 115VAC CONTROL SUPPLY TRANSFORMER
  • CONTROL PANEL WIRING
  • VOLTS FREE CONTACTS
  • SYSTEM INPUTS
• SECTION 5 - COMMISSIONING
  • PREPARATION
  • PREPARATION – POWER OFF
  • FIRST TIME START-UP
• SECTION 6 - OPERATION
  • GENERAL DESCRIPTION
  • START-UP
  • NORMAL RUNNING AND CYCLING
  • SHUTDOWN
• SECTION 7 - TECHNICAL DATA
  • FLOW RATE AND PRESSURE DROP CHARTS
  • GLYCOL CORRECTION FACTORS
  • TEMPERATURE AND FLOWS
  • PHYSICAL DATA
  • OPERATING LIMITATIONS AND SOUND POWER DATA
  • WIRING DIAGRAM
  • ELEMENTARY DIAGRAM
  • CONNECTION DIAGRAM
  • COMPRESSOR TERMINAL BOX
  • DIMENSIONS
  • TECHNICAL DATA
  • WEIGHT DISTRIBUTION AND ISOLATOR MOUNTING POSITIONS
  • INSTALLATION INSTRUCTIONS FOR VMC SERIES AWR/AWMR AND CP RESTRAINED MOUNTINGS
  • COMPRESSOR COMPONENTS
  • SYSTEM STARTUP CHECKLIST
  • UNIT CHECKS
  • PROGRAMMED VALUES
  • INITIAL START-UP
  • CHECKING SUBCOOLING AND SUPERHEAT
  • CHECKING ECONOMIZER SUPERHEAT
  • LEAK CHECKING
• SECTION 8 - MICRO PANEL CONTENTS
  • CHILLER CONTROL PANEL PROGRAMMING AND DATA ACCESS KEYS
  • DISPLAY AND STATUS INFORMATION KEYS
  • ON / OFF ROCKER SWITCH
  • PROGRAM & SETUP KEYS
  • 1. INTRODUCTION & PHYSICAL DESCRIPTION
  • 2. STATUS KEY: GENERAL STATUS MESSAGES & FAULT WARNINGS
  • 3. DISPLAY KEYS & OPTION SWITCHES
  • 4. PRINT KEYS
  • 5. ENTRY KEYS
  • 6. SETPOINTS KEYS & CHILLED LIQUID CONTROL
  • 7. CLOCK KEYS
  • 8. PROGRAM KEY
• SECTION 9 - MAINTENANCE
  • GENERAL REQUIREMENTS
  • CONDENSER COILS
  • ON-BOARD BATTERY BACK-UP
  • OVERALL UNIT INSPECTION
  • COMPRESSOR UNIT OPERATION
  • GENERAL PERIODIC MAINTENANCE CHECKS STANDARD UNITS
• SECTION 10 - SPARE PARTS
• SECTION 11 - TROUBLESHOOTING GUIDE