York Tm9E Technical Guide 1104558 YTG C 0615

: York Tm9E-Technical-Guide york-tm9e-technical-guide-811959 york pdf

Open the PDF directly: View PDF .
Page Count: 4

TECHNICAL GUIDE

95.0% AFUE SINGLE STAGE ECM

RESIDENTIAL GAS FURNACES

MULTI-POSITION

MODELS: TM9E

NATURAL GAS

40 - 120 MBH INPUT

Due to continuous product improvement, specifications

are subject to change without notice.

Visit us on the web at

www.upgnet.com and www.york.com

Additional rating information can be found at

www.ahridirectory.org

WARRANTY SUMMARY

A 20-year limited warranty on heat exchangers in residential

applications.

A 10-year warranty on the heat exchanger in commercial

applications.

Standard 5-year limited Parts warranty.

Extended lifetime heat exchanger and 10-year limited

parts warranty when product is registered online within

90 days of purchase for replacement or closing for new

home construction.

See Limited Warranty certificate in Users Information Manual for details.

1104558-YTG-C-0615

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

DESCRIPTION

These compact units employ induced combustion, reliable hot

surface ignition and high heat transfer aluminized tubular heat

exchangers. The units are factory shipped for installation in

upflow or horizontal applications and may be converted for down-

flow applications.

These furnaces are designed for residential installation in a base-

ment, closet, alcove, attic, recreation room or garage and are

also ideal for commercial applications. All units are factory

assembled, wired and tested to assure safe dependable and eco-

nomical installation and operation.

These units are Category IV, National Fuel Gas Code and may be

vented either through side wall or roof applications using

approved plastic combustion air and vent piping. Approved plas-

tic combustion air and vent piping include Polyflue (a polypropyl-

ene venting systems).

FEATURES

• Easily applied in upflow, horizontal left or right, or downflow

installation with minimal conversion necessary.

• Compact, easy to install, ideal height 33" tall cabinet.

• Blower-off delay for cooling SEER improvement.

• Easy access to controls to connect power/control wiring.

• Built-in, high level self diagnostics with fault code displays

standard on integrated control module for reliable operation.

• Low unit amp requirement for easy replacement application.

• All models are convertable to use propane (LP) gas.

• Electronic Hot Surface Ignition saves fuel cost with

increased dependability and reliability.

• 100% shut off main gas valve for extra safety.

• 5 speed, direct drive Standard ECM style high efficiency DC

motor.

• 24V, 40 VA control transformer and blower relay supplied for

add-on cooling.

• Hi-tech tubular aluminized steel primary heat exchanger.

• Secondary heat exchanger made of corrosion resistant

stainless steel materials.

• Timed on, adjustable off blower capability for maximum com-

fort.

• Blower door safety switch.

• Solid removable bottom panel allows easy conversion.

• Airflow leakage less than 1% of nominal airflow at duct-

blaster conditions.

• No knockouts to deal with, making installation easier.

• Movable duct connector flanges for application flexibility.

• Quiet inducer operation.

• Inducer rotates for easy conversion of venting options.

• Fully supported blower assembly for easy access and

removal of blower.

• External air filters used for maximum flexibility in meeting

customers IAQ needs.

• Protection included from air intake, exhaust vent, or conden-

sate blockage.

• Patent pending self priming internal condensate trap design

for easy installation.

• Venting applications - may be installed as a either 2-pipe

(sealed combustion) or single-pipe vent (using indoor com-

bustion air.

• No special vent termination required.

• 1/4 turn knobs provided for easy door removal.

• High-efficiency blower motor for lower electrical power usage

and improved A/C SEER ratings.

• Insulated blower compartment for terminal and acoustic per-

formance.

1104558-YTG-C-0615

2Johnson Controls Unitary Products

NOTES:

Annual Fuel Utilization Efficiency (AFUE) numbers are determined in accordance with DOE Test procedures.

Wire size and over current protection must comply with the National Electrical Code (NFPA-70-latest edition) and all local codes.

The furnace shall be installed so that the electrical components are protected from water.

FRONT

33

A

LEFT SIDE

Combustion Air Inlet

Condensate Drain

(Downflow)

Vent Outlet

Thermostat

Wiring

28.5”

Gas Pipe

Entry

Electrical

Entry

Condensate

Drain

Thermostat

Wiring

RIGHT SIDE

Vent Outlet

Condensate Drain

(Downflow)

14”

1”

1.5”

23”

Combustion Air Inlet

Gas Pipe

Entry

Electrical

Entry

Condensate

Drain

Optional Return Air

Cutout (Either side)

29.5”

C

SUPPLY END

.56”

.56”

20”

B

3”

23.8”

.56”

Combustion

Air Inlet

Vent

Outlet

RETURN END

B

24.25”

Cabinet & Duct Dimensions

BTUH (kW)

Input

Nominal

CFM (m3/min)

Cabinet

Size

Cabinet Dimensions (Inches) Approximate

Operating Weights

ABC Lbs

TM9E040A10MP11 1000 A 14-1/2 13-3/8 11-3/4 113

TM9E060B12MP11 1200 B 17-1/2 16-3/8 13-1/4 122

TM9E080B12MP11 1200 B 17-1/2 16-3/8 14-3/4 126

TM9E080C16MP11 1600 C 21 19-7/8 16-1/2 136

TM9E100C16MP11 1600 C 21 19-7/8 18-1/4 142

TM9E100C20MP11 2000 C 21 19-7/8 18-1/4 145

TM9E120D20MP11 2000 D 24-1/2 23-3/8 21-3/4 156

Ratings & Physical / Electrical Data

BTUH (kW)

Input

Output Nominal

Airflow AFUE Air Temp.

Rise Max. Outlet

Air Temp Blower Blower

Size

Max

Over-Current

Protect

Total Unit

Amps

Min. wire Size

(awg) @ 75 ft

one way

MBH CFM %°F °F HP Amps

TM9E040A10MP11 38 1000 95.0 45-75 180 1/2 6.8 11x8 15 9.5 14

TM9E060B12MP11 57 1200 95.0 40-70 180 1/2 6.8 11x8 15 9.5 14

TM9E080B12MP11 76 1200 95.0 50-80 170 1/2 6.8 11x8 15 9.5 14

TM9E080C16MP11 76 1600 95.0 40-70 165 1/2 6.8 11x10 15 9.5 14

TM9E100C16MP11 95 1600 95.0 45-75 170 1/2 6.8 11x10 15 9.5 14

TM9E100C20MP11 95 2000 95.0 50-80 165 3/4 8.4 11x11 15 10.9 14

TM9E120D20MP11 114 2000 95.0 50-80 175 3/4 8.4 11x11 15 10.9 14

1104558-YTG-C-0615

Johnson Controls Unitary Products 3

FILTER PERFORMANCE

The airflow capacity data published in the “Blower Perfor-

mance” table shown represents blower performance WITHOUT

filters.

All applications of these furnaces require the use of field

installed air filters. All filter media and mounting hardware or

provisions must be field installed external to the furnace cabi-

net. DO NOT attempt to install any filters inside the furnace.

1. Air velocity through throwaway type filters may not exceed 300 feet per min-

ute (91.4 m/min). All velocities over this require the use of high velocity fil-

ters.

2. Do not exceed 1800 CFM using a single side return and a 16x25 filter. For

CFM greater than 1800, you may use two side returns or one side and the

bottom or one return with a transition to allow use of a 20x25 filter.

* - 24" clearance in front and 18" on side recommended for service access.

All furnaces approved for alcove and attic installation.

ACCESSORIES

Propane (LP) Conversion Kit - This accessory conversion kit

may be used to convert natural gas (N) units for propane (LP)

operation.

S1-1NP0347 - All Models

Concentric Vent Termination - For use through rooftop, side-

wall. Allows combustion air to enter and exhaust to exit through

single common hole. Eliminates unslightly elbows for a cleaner

installation.

S1-1CT0302 (2") & S1-1CT0302-636 (2")

S1-1CT0303 (3") & S1-1CT0303-636 (3")

Sidewall Vent Termination Kit - For use on sidewall, two-pipe

installations only. Provide a more attractive termination for loca-

tions where the terminal is visable on the side of the home.

S1-1HT0901 (3")

S1-1HT0902 (2")

Condensate Neutralizer Kit - Neutralizer cartridge has a 1/2"

plastic tube fittings for installation in the drain line. Calcium car-

bonate refill media is also available from the Source 1 Parts

(P/N 026-30228-000).

1NK0301

Side Return Filter Racks -

S1-1SR0200 - All Models

S1-1SR0402 - All Models

Bottom Return Filter Racks - 1BR05xx series are galvanized

steel filter racks. 1BR06xx are pre-painted steel filter racks to

match the appearance of the furnace cabinet.

S1-1BR0514 or 1BR0614 - For 14-1/2” cabinets

S1-1BR0517 or 1BR0617 - For 17-1/2” cabinets

S1-1BR0521 or 1BR0621 - For 21” cabinets

S1-1BR0524 or 1BR0624 - For 24-1/2” cabinets

Combustible Floor Base Kit - For installation of these fur-

naces in downflow applications directly onto combustible floor-

ing material, These kits are required to prevent potential

overheating situations.tible floor base kit provides access for

combustible airflow.

S1-1CB0514 - For 14-1/2” cabinets

S1-1CB0517 - For 17-1/2” cabinets

S1-1CB0521 - For 21” cabinets

S1-1CB0524 - For 24-1/2” cabinets

High Altitude Pressure Switches - For installation where the

altitude is less than 5,000 feet it is not required that the pres-

sure switch be changed. For altitudes above 5,000 feet, see kits

below.

S1-1PS3306 - 060

S1-1PS3307 - 040, 080

S1-1PS3302 - 100, 120

Thermostats - Compatible thermostat controls are available

through accessory sourcing. For optimum performance and

installation, refer to the UPGNET “Low Voltage Wiring Diagram”

document to select and apply controls.

Single side return above 1800 CFM is approved as long as

the filter velocity does not exceed filter manufacturer’s rec-

ommendation and a transition is used to allow use on a

20x25 filter.

Recommended Filter Sizes (High velocity 600 FPM)

CFM Cabinet

Size Side

(in) Bottom

(in)

1000 A 16 x 25 14 x 25

1200 B 16 x 25 16 x 25

1600 C 16 x 25 20 x 25

2000 C (2) 16 x 25 20 x 25

2000 D (2) 16 x 25 22 x 25

NOTES:

Unit Clearances to Combustibles

Application Upflow Downflow Horizontal

Top 1" 0" 0"

Vent 0" 0" 0"

Rear 0" 0" 0"

Side 0" 0" 1"

Front* 0" 0" 0"

Floor Combustible Combustible1

1. For combustible floors only when used with special sub-base.

Combustible

Closet Yes Yes Yes

Line Contact No No Yes

NOTES:

NOTICE

Subject to change without notice. Published in U.S.A. 1104558-YTG-C-0615

Copyright © 2015 by Johnson Controls, Inc. All rights reserved. Supersedes: 1104558-YTG-B-0714

York International Corp.

5005 York Drive

Norman, OK 73069

NOTES:

1. Airflow expressed in standard cubic feet per minute (SCFM).

2. Motor voltage at 115 V.

Blower Performance CFM - Any Position (without filter)

Models Speed

Bottom Airflow Data (SCFM)1,2

Ext. Static Pressure (in. H2O)

0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

TM9E040A12MP11

High 1290 1260 1220 1160 1100 1040 960 840 750 660

Medium High 1170 1140 1110 1070 1040 990 930 820 730 650

Medium 990 980 940 900 860 830 790 730 680 630

Medium Low 900 880 850 810 770 730 670 630 600 560

Low 730 710 690 650 620 590 540 510 480 450

TM9E060B12MP11

High 1402 1374 1354 1328 1299 1262 1222 1167 1107 1036

Medium High 1252 1233 1203 1182 1150 1125 1095 1064 1031 980

Medium 1076 1059 1029 1007 973 946 908 883 843 800

Medium Low 988 967 936 903 875 838 806 765 737 685

Low 798 769 727 695 650 619 574 517 485 443

TM9E080B12MP11

High 1445 1423 1397 1365 1339 1311 1283 1250 1204 1140

Medium High 1282 1266 1232 1211 1182 1157 1128 1097 1069 1013

Medium 1098 1084 1059 1027 998 967 939 910 879 822

Medium Low 1012 993 953 930 894 851 828 773 752 692

Low 865 810 763 730 689 628 594 520 496 448

TM9E080C16MP11

High 1713 1682 1643 1600 1558 1519 1480 1436 1385 1333

Medium High 1554 1519 1485 1439 1404 1368 1327 1280 1176 1130

Medium 1380 1351 1302 1263 1224 1171 1128 1085 1030 943

Medium Low 1177 1142 1083 1050 988 922 890 819 798 687

Low 951 841 650 588 457 418 355 227 203 N / A

TM9E100C16MP11

High 1734 1694 1650 1611 1570 1536 1485 1438 1392 1335

Medium High 1568 1537 1492 1453 1414 1373 1327 1279 1230 1118

Medium 1420 1380 1332 1294 1249 1196 1152 1100 981 938

Medium 1218 1169 1124 1067 1015 965 894 845 754 679

Low 979 846 647 580 464 427 345 220 195 N / A

TM9E100C20MP11

High 2143 2102 2065 2028 1989 1944 1892 1825 1733 1625

Medium High 1788 1749 1718 1672 1629 1587 1541 1500 1447 1355

Medium 1575 1539 1500 1456 1410 1363 1305 1246 1095 1030

Medium Low 1372 1325 1276 1225 1170 1111 1044 972 884 812

Low 1031 921 810 728 660 615 518 474 391 355

TM9E120D20MP11

High 2214 2173 2132 2086 2036 1994 1952 1907 1849 1777

Medium High 1841 1799 1749 1699 1659 1611 1567 1520 1471 1372

Medium 1605 1562 1514 1470 1416 1361 1310 1180 1119 1045

Medium Low 1405 1362 1303 1244 1189 1125 1054 986 876 826

Low 1135 1020 844 758 671 557 511 464 387 N / A