York Heat Pump Yhjd18 Thru 60 Users Manual 571209 YTG C 1012
York Heat Pump YHJD18 thru 60 571209-YTG-C-1012
YHJD18 thru 60 to the manual 76d5c3be-42dc-433f-91fe-d311a3c1e9fc
2015-02-02
: York York-Heat-Pump-Yhjd18-Thru-60-Users-Manual york-york-heat-pump-yhjd18-thru-60-users-manual-455367 york pdf
Open the PDF directly: View PDF 
.
Page Count: 44
| Download | |
| Open PDF In Browser | View PDF |
571209-YTG-C-1012 DESCRIPTION The 13 SEER Series unit is the outdoor part of a versatile climate system. It i76s designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications this climate system is supported with accessories and documents to serve specific functions. TECHNICAL GUIDE LX SERIES SPLIT-SYSTEM HEAT PUMPS 13 SEER – R-410A – 1 PHASE 1.5 THRU 5 NOMINAL TONS MODELS: YHJD18 THRU 60 FEATURES • Small Footprint - The compact footprint is a perfect fit for any application. • Quality Condenser Coils - The coil is constructed of copper tubing and enhanced aluminum fins for increased performance. • Coil Protection - Coils are protected from damage by a slotted, stamped steel coil guard. • Protected Compressor - Compressors are protected internally by a high pressure relief valve and a temperature sensor, and externally by the system high pressure switch. A factory installed liquid line filter-drier further protects the compressor against moisture and debris. • Environmentally Friendly Refrigerant - The next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion. • Durable Finish - The cabinet is made of G90-equivalent prepainted steel, with special primer formulas and matte champagne texture to insure less fading when exposed to sunlight. The coated steel wire fan guard and pre-treated, galvanized steel chassis components resist corrosion and rust creep. • Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. The unit is factory charged for a 15-foot lineset. The small base dimension means less space is required on the ground or roof. • Top Discharge - Warm air from the top mounted fan is blown up, away from the structure and any landscaping. This allows compact location on multi-unit applications. • Low Operating Sound Level - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the condenser coil muffle the normal fan motor and compressor operating sounds. ® Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at www.upgnet.com and www.york.com Additional rating information can be found at www.ahridirectory.org WARRANTY SUMMARY* Standard 5-Years limited parts warranty. Standard 10-Years limited compressor warranty. Extended 10-Years limited parts warranty when product is registered online within 90 days of purchase for replacement or closing for new home construction. • Low Maintenance - Long life, permanently lubricated motorbearings need no annual servicing. • Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls make for easy servicing of the unit. • Secured Service Valves - Secured, re-usable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging. • Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program. *Does not apply to R-22 models, 3-Phase models, or internet sales. See Limited Warranty certificate in User's Information Manual for details. FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE 571209-YTG-C-1012 Physical and Electrical Data YHJD18 S41S2 MODEL YHJD24 S41S4 YHJD30 S41S4 Unit Supply Voltage YHJD36 S41S4 YHJD42 S41S4 YHJD48 S41S4 YHJD60 S41S5 208-230V, 1 60Hz Normal Voltage Range 1 187 to 252 Minimum Circuit Ampacity Max. Overcurrent Device Amps Min. Overcurrent Device Amps 11.9 11.2 14.1 19.7 20.9 25.6 42.6 20 15 20 30 35 45 70 2 3 Compressor Type 15 15 15 20 25 30 45 Scroll Recip Recip Recip Recip Recip Scroll Rated Load 9.0 8.3 10.6 14.7 15.7 19.4 33.0 Locked Rotor 48.0 43.0 54.0 74.0 88.0 88.0 134.0 Crankcase Heater No Yes Yes Yes Yes Yes No Factory External Discharge Muffler Yes No No No No No Yes Factory External Check Valve No No No No No No No No Yes Yes Yes Yes Yes* No 0.70 0.80 0.80 1.3 1.3 1.3 1.5 24 24 24 24 24 24 24 1/10 1/8 1/8 1/4 1/4 1/4 1/4 Compressor Amps HS Kit Required with TXV Fan Motor Amps 4 Rated Load Fan Diameter Inches Rated HP Fan Motor Nominal RPM 825 1075 1075 850 850 850 850 Nominal CFM 2000 2900 3000 3800 3800 3600 3550 Face Area Sq. Ft. 23.6 15.7 18.3 21.0 23.6 23.6 23.6 Rows Deep 1 1 1 1 1 2 2 Fins / Inch 22 22 22 22 22 18 18 Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 3/4 7/8 7/8 1-1/8 Unit Charge (Lbs. - Oz.) 5 6-6 9-6 9-0 10 - 0 9 - 10 14 - 12 15 - 0 Charge Per Foot, Oz. 0.62 0.62 0.62 0.62 0.67 0.67 .76 Operating Weight Lbs. 172 194 206 218 218 285 290 Coil * These models are shipped with a Hard Start Kit installed at the factory. 1. 2. 3. 4. 5. Rated in accordance with AHRI Standard 110-2012, utilization range “A”. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value. Unit Model C A Dimensions (Inches) Refrigerant Connection Service Valve Size A B C 18 28-1/4 34 34 24 32-1/4 34 34 30 36-1/4 34 34 36 40-1/4 34 34 42 40-1/4 34 34 48 40-1/4 34 34 60 40-1/4 34 34 Liquid Vapor 3/4 3/8 7/8 7/8* * Adapter fitting required for 1-1/8" line set. B 2 All dimensions are in inches and are subject to change without notice. Overall height is from bottom of base pan to top of fan guard. Overall length and width include screw heads. Johnson Controls Unitary Products 571209-YTG-C-1012 System Charge for Various Matched Systems Outdoor Unit Required Orifice or TXV 1,2 YHJD18S41S2 YHJD24S41S4 YHJD30S41S4 YHJD36S41S4 YHJD42S41S4 YHJD48S41S4 YHJD60S41S5 .051/4F1 .054, .059/4G1 .063/4G1 .071/4H1 .075/4H1 4J1 4K1 Additional Charge, Oz Indoor Unit 3,4,5 AHE18B .051/ TXV + 0 – – – – – – AHE24B – .054 / TXV + 0 – – – – – AHE30B – .054 / TXV + 0 .063 / TXV + 0 – – – – AHE36C – – .063 / TXV + 25 .071 / TXV + 0 – – – AHE42D – – – .071 / TXV + 16 – – – AHE48D – – – – .075 / TXV + 0 TXV + 0 – AHE60D – – – – – TXV + 25 TXV + 0 AHR18B .051/ TXV + 0 – – – – – – AHR24B – .054 / TXV + 0 – – – – – AHR30B – – .063 / TXV + 0 – – – – AHR36B – – .063 / TXV + 25 .071 / TXV + 6 – – – AHR42C – – – .071 / TXV + 16 – – – AHR48D – – – – .075 / TXV + 0 TXV + 0 – AHR60D – – – – – TXV + 25 TXV + 0 AHV18B .051/ TXV + 0 – – – – – – AHV24B – .054 / TXV + 0 – – – – – AHV30B – .054 / TXV + 0 .063 / TXV + 0 – – – – AHV36C – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – – AHV42D – – – .071 / TXV + 16 – – – AHV48D – – – – .075 / TXV + 0 TXV + 0 – AHV60D – – – – – TXV + 25 TXV + 0 AV*24 .051/ TXV + 3 – – – – – – AV*36 – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – – AV*48 – – – – .075 / TXV + 0 TXV + 0 – AV*60 – – – – .075 / TXV + 0 TXV + 0 – FC/MC/PC18 .051/ TXV + 0 – – – – – – FC/MC/PC24 .051/ TXV + 5 – – – – – – FC/MC/PC30 .051/ TXV + 5 – – – – – – FC/MC/PC32 – .059 / TXV + 0 .063 / TXV + 0 – – – – FC/MC/PC35 – .059 / TXV + 0 .063 / TXV + 0 – – – – FC/MC/PC37 – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – – FC/MC/PC43 – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – – FC/MC/PC/UC48 – – – .071 / TXV + 16 – – – FC/MC/PC/UC60 – – – – .075 / TXV + 0 TXV + 0 – FC/MC62 – – – – – TXV + 25 TXV + 0 FC64 – – – – – – TXV + 23 UC18 .051/ TXV + 1 – – – – – – UC24 .051/ TXV + 7 – – – – – – UC30 .051/ TXV + 7 – – – – – – UC48 – – – .071 / TXV + 25 – – – UC60 – – – – .075 / TXV + 2 TXV + 11 – Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table. FOOTNOTES: 1. 2. 3. 4. 5. For applications requiring a TXV use S1-1TVM*** series kit. Approved orifice(s) shipped with outdoor unit. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications. Refer to Cooling and Heating Performance Data tables for actual performance for specified system matches. PROCEDURES: 1. 2. 3. 4. 5. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing. Verify the TXV or orifice and additional charge required for specific matched indoor unit in the system using the above table. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit + charge adder for line set. Johnson Controls Unitary Products 3 571209-YTG-C-1012 COOLING CAPACITY - With Air Handler Coils UNIT MODEL AIR HANDLER COIL MODEL1 MODEL WIDTH AHE18B 17.5 – AHR18B 17.5 – AHV18B 17.5 COOLING RATED CFM NET MBH SEER EER 14.6 14.00 12.00 14.9 13.00 11.00 18.0 13.2 14.00 12.00 TOTAL SENS. 610 18.0 665 18.0 – 615 13 SEER HP WITH AIR HANDLERS YHJD18S41S2 YHJD24S41S4 YHJD30S41S4 YHJD36S41S4 AV*24 17.5 – 610 18.0 13.7 14.50 12.00 MV12B 17.5 FC/MC18B 600 18.0 13.7 14.50 12.00 MV12B 17.5 FC/MC24B 600 18.0 13.7 14.50 12.00 MV12B 17.5 FC/MC30B 600 18.0 13.7 14.50 12.00 MX12B 17.5 FC/MC18B 585 18.0 14.5 14.50 12.00 MX12B 17.5 FC/MC24B 645 18.0 15.0 14.50 12.00 MX12B 17.5 FC/MC30B 645 18.0 15.0 14.50 12.00 AHE24B 17.5 – 795 24.0 17.4 14.50 12.00 12.00 AHE30B 17.5 – 795 24.0 17.4 14.50 AHR24B 17.5 – 740 24.0 16.9 13.00 11.00 AHV24B 17.5 – 710 24.0 17.0 14.00 12.00 AHV30B 17.5 – 775 24.0 17.6 14.00 12.00 AHV36C 21.0 – 760 24.0 17.8 14.00 12.00 AV*36 21.0 – 725 24.0 17.0 14.50 12.00 MV12B 17.5 FC/MC35B 800 24.0 17.5 14.50 12.00 MV12B 17.5 FC/MC43B 800 24.0 17.3 14.50 12.00 MX12B 17.5 FC/MC35B 815 24.0 17.6 14.50 12.00 MX12B 17.5 FC/MC43B 735 24.0 17.1 14.50 12.00 AHE30B 17.5 – 985 29.2 21.0 14.00 12.00 AHE36C 21.0 – 1000 29.8 21.8 14.00 12.00 AHR30B 17.5 – 1090 29.2 21.8 13.00 11.00 AHR36B 17.5 – 1060 29.6 21.6 13.00 11.00 AHV30B 17.5 – 1000 29.6 27.0 13.50 11.50 AHV36C 21.0 – 895 29.8 26.6 14.00 12.00 AV*36 21.0 – 960 30.0 22.4 14.50 12.00 MV12B 17.5 FC/MC35B 1010 30.0 22.0 14.50 12.00 MV12B 17.5 FC/MC43B 1000 30.0 22.2 14.50 12.00 MV16C 21.0 FC/MC35C 1070 30.0 23.0 14.50 12.00 MV16C 21.0 FC/MC43C 1000 30.0 22.2 14.50 12.00 MX12B 17.5 FC/MC35B 1085 29.6 22.2 14.00 12.00 MX12B 17.5 FC/MC43B 1095 29.4 22.6 14.00 12.00 MX16C 21.0 FC/MC35C 1035 29.6 22.2 14.00 12.00 MX16C 21.0 FC/MC43C 970 29.6 21.6 14.00 12.00 AHE36C 21.0 – 1190 35.6 25.7 14.50 12.00 AHE42D 24.5 – 1180 35.6 25.6 14.50 12.00 AHR36B 21.0 – 1245 35.6 26.1 13.00 11.00 AHR42C 21.0 – 1230 35.6 25.8 13.00 11.00 AHV36C 21.0 – 1215 36.0 27.4 14.00 12.00 AHV42D 24.5 – 1180 36.0 27.6 14.50 12.00 AV*36 21.0 – 1190 36.0 26.8 14.50 12.00 MV12B 17.5 FC/MC43B 1225 36.0 27.2 14.50 12.00 MV12D 24.5 FC/MC48D 1160 36.0 26.6 14.50 12.00 MV16C 21.0 FC/MC43C 1200 36.0 26.8 14.50 12.00 MV16C 21.0 FC/MC48C 1200 36.0 26.6 14.50 12.00 MX12B 17.5 FC/MC43B 1220 35.6 26.0 14.00 12.00 MX12D 24.5 FC/MC48D 1225 35.6 25.7 14.50 12.00 MX16C 21.0 FC/MC43C 1140 35.6 25.5 14.00 12.00 MX16C 21.0 FC/MC48C 1150 35.6 25.6 14.00 12.00 For Notes See Page 5. 4 Johnson Controls Unitary Products 571209-YTG-C-1012 COOLING CAPACITY - With Air Handler Coils (Continued) UNIT MODEL AIR HANDLER COIL MODEL1 MODEL WIDTH AHE48D 24.5 – AHR48D 24.5 – AHV48D 24.5 AV*48 24.5 COOLING RATED CFM NET MBH SEER EER 33.2 14.00 12.00 29.6 13.00 11.00 39.5 30.2 13.75 11.50 1385 42.0 32.6 14.50 12.00 12.00 TOTAL SENS. 1385 40.5 1320 39.5 – 1300 – 13 SEER HP WITH AIR HANDLERS YHJD42S41S4 YHJD48S41S4 YHJD60S41S5 AV*60 24.5 – 1360 42.0 32.6 14.50 MV16C 21.0 FC60C 1400 40.0 30.0 13.50 11.75 MV20D 24.5 FC/MC60D 1400 42.0 32.4 14.00 12.00 MX16C 21.0 FC60C 1420 41.5 32.2 14.50 12.00 MX20D 24.5 FC/MC60D 1470 41.5 32.2 14.50 12.00 AHE48D 24.5 – 1635 44.0 33.2 14.00 12.00 AHE60D 24.5 – 1565 45.0 34.4 14.50 12.00 AHR48D 24.5 – 1610 43.5 32.8 13.00 11.00 AHR60D 24.5 – 1620 44.0 33.8 13.25 11.35 AHV48D 24.5 – 1585 44.5 33.2 14.50 12.00 AHV60D 24.5 – 1570 44.5 34.0 14.50 12.00 AV*48 24.5 – 1625 45.0 34.4 14.50 12.00 AV*60 24.5 – 1560 45.0 34.6 14.50 12.00 MV16C 21.0 FC60C 1625 44.5 34.2 14.50 12.00 MV20D 24.5 FC/MC60D 1600 44.5 33.8 14.50 12.00 MV20D 24.5 FC/MC62D 1630 45.5 34.4 14.50 12.00 MX16C 21.0 FC60C 1630 45.0 34.4 14.50 12.00 MX20D 24.5 FC/MC60D 1585 45.5 34.6 14.50 12.00 MX20D 24.5 FC/MC62D 1605 45.0 34.4 14.50 12.00 AHE60D 24.5 – 1950 58.0 41.50 13.00 11.00 AHR60D 24.5 – 1835 58.0 41.00 14.00 12.00 AHV60D 24.5 – 1635 57.5 39.0 13.75 11.80 MV20D 24.5 FC/MC62D 1855 58.0 41.5 13.75 11.80 MV20D 24.5 FC64D 1855 57.0 43.0 13.25 11.35 MX20D 24.5 FC/MC62D 1795 58.0 41.0 14.00 12.00 MX20D 24.5 FC64D 1795 57.0 42.5 13.75 12.00 Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240. Cooling MBH based on 80 °F entering air temperature, 50% RH (Relative Humidity), and rated air flow. EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 °F outdoor ambient divided by the total electric power in watt-hours at those conditions. SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period. 1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. — = Not applicable. MA Modular Air Handlers use Coil Only Ratings. Johnson Controls Unitary Products 5 571209-YTG-C-1012 COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings) COIL UNIT MODEL COOLING CFM RANGE (Min.-max.) RATED CFM NET MBH SEER1 EER 14.0 13.00 11.00 14.0 13.50 11.00 18.0 13.7 13.00 11.00 600 18.0 13.8 13.05 11.00 450 - 750 600 18.0 13.8 13.05 11.00 14.5 600 - 1000 800 23.8 17.1 13.00 11.00 FC/MC/PC35 17.5,21.0 600 - 1000 800 23.6 17.1 13.00 11.00 FC/MC/PC37 14.5 600 - 1000 800 24.0 17.3 13.00 11.00 FC/MC/PC43 17.5,21.0 600 - 1000 800 24.0 17.3 13.00 11.00 FC/MC/PC32 14.5 800 - 1200 1000 29.8 21.8 13.00 11.00 FC/MC/PC35 17.5,21.0 800 - 1200 1000 29.8 21.8 13.00 11.00 FC/MC/PC37 14.5 800 - 1200 1000 30.0 22.2 13.00 11.00 FC/MC/PC43 17.5,21.0 800 - 1200 1000 30.0 22.2 13.00 11.00 FC/MC/PC37 14.5 1000 - 1400 1200 36.0 26.8 13.00 11.00 FC/MC/PC43 17.5,21.0 1000 - 1400 1200 36.0 26.6 13.00 11.00 FC/MC/PC48 21.0,24.5 1000 - 1400 1200 36.0 26.6 13.00 11.00 UC48 21.0,24.5 1000 - 1400 1200 36.0 26.8 13.00 11.00 FC/MC/PC60 21.0,24.5 1200 - 1600 1400 41.0 31.8 13.00 11.00 MODEL WIDTH FC/MC/PC18 14.5,17.5 450 - 750 FC/MC/PC24 14.5,17.5 450 - 750 FC/MC/PC30 14.5,17.5 UC24 TOTAL SENS. 600 18.0 600 18.0 450 - 750 600 14.5,17.5 450 - 750 UC30 14.5,17.5 FC/MC/PC32 13 SEER HP COIL ONLY RATINGS YHJD18S41S2 YHJD24S41S4 YHJD30S41S4 YHJD36S41S4 YHJD42S41S4 YHJD48S41S4 YHJD60S41S5 UC60 21.0,24.5 1200 - 1600 1400 40.5 31.0 13.00 11.00 FC/MC/PC60 21.0,24.5 1400 - 1800 1600 44.0 33.4 13.00 11.00 FC/MC62 24.5 1400 - 1800 1600 44.5 33.8 13.00 11.00 UC60 21.0,24.5 1400 - 1800 1600 44.0 32.8 13.00 11.00 FC/MC62 24.5 1600 - 2000 1800 57.5 41.0 13.25 11.35 FC64 24.5 1600 - 2000 1800 56.5 42.5 13.00 11.00 1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one. MA Modular Air Handlers use Coil Only Ratings. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. COOLING CAPACITY - With High Efficiency Motor Furnaces FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 YHJD18S41S2 T*(8,L)V*A12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30 T*(8,L)V*A12 14.5 FC/MC/PC24A 640 18.0 12.7 14.80 12.50 T*(8,L)V*A12 14.5 FC/MC/PC30A 640 18.0 12.7 14.80 12.50 T*(8,L)V*A12 14.5 UC18A 620 18.0 12.4 14.60 12.30 T*(8,L)V*A12 14.5 UC24A 640 18.0 12.8 14.80 12.50 T*(8,L)V*A12 14.5 UC30A 640 18.0 12.8 14.80 12.50 T*(8,L)V*B12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30 T*(8,L)V*B12 17.5 FC/MC/PC24B 575 18.0 12.2 14.90 12.60 T*(8,L)V*B12 17.5 FC/MC/PC30B 575 18.0 12.2 14.90 12.60 T*(8,L)V*B12 17.5 UC18B 580 18.0 12.0 14.60 12.30 T*(8,L)V*B12 17.5 UC24B 575 18.0 12.3 14.90 12.60 T*(8,L)V*B12 17.5 UC30B 575 18.0 12.3 15.00 12.60 T*(8,L)X*A12 14.5 FC/MC/PC18A 540 18.0 14.3 14.00 12.00 T*(8,L)X*A12 14.5 FC/MC/PC24A 595 18.0 14.9 14.00 12.00 T*(8,L)X*A12 14.5 FC/MC/PC30A 595 18.0 14.9 14.00 12.00 T*(8,L)X*A12 14.5 UC18B 590 18.0 13.9 14.50 12.00 For Notes See Page 12. 6 Johnson Controls Unitary Products 571209-YTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 YHJD18S41S2 T*(8,L)X*A12 14.5 UC24B 570 18.0 14.1 14.50 12.00 T*(8,L)X*A12 14.5 UC30B 570 18.0 14.1 14.50 12.00 T*(8,L)X*B12 17.5 FC/MC/PC18B 580 18.0 14.6 14.00 12.00 T*(8,L)X*B12 17.5 FC/MC/PC24B 620 18.0 14.9 14.00 12.00 T*(8,L)X*B12 17.5 FC/MC/PC30B 620 18.0 14.9 14.00 12.00 T*(8,L)X*B12 17.5 UC18B 595 18.0 13.9 14.50 12.00 T*(8,L)X*B12 17.5 UC24B 575 18.0 14.2 14.50 12.00 T*(8,L)X*B12 17.5 UC30B 575 18.0 14.2 14.50 12.00 T*9V*A10 17.5 FC/MC/PC18A 580 18.0 13.6 14.00 12.00 T*9V*A10 17.5 FC/MC/PC24A 575 18.0 14.0 14.00 12.00 T*9V*A10 17.5 FC/MC/PC30A 575 18.0 14.0 14.00 12.00 T*9(C,V)*B12 17.5 FC/MC/PC18B 610 18.0 12.2 14.60 12.40 T*9(C,V)*B12 17.5 FC/MC/PC24B 610 18.0 12.7 14.90 12.60 T*9(C,V)*B12 17.5 FC/MC/PC30B 610 18.0 12.7 14.90 12.60 T*9(C,V)*B12 17.5 UC18B 610 18.0 12.3 14.80 12.40 T*9(C,V)*B12 17.5 UC24B 610 18.0 12.8 14.90 12.60 T*9(C,V)*B12 17.5 UC30B 610 18.0 12.8 15.00 12.60 T*9X*A10 14.5 FC/MC/PC18A 575 18.3 13.7 14.00 12.00 T*9X*A10 14.5 FC/MC/PC24A 595 18.7 14.1 14.00 12.00 T*9X*A10 14.5 FC/MC/PC30A 595 18.7 14.1 14.00 12.00 T*9X*B12 17.5 FC/MC/PC18B 590 18.0 14.7 14.00 12.00 T*9X*B12 17.5 FC/MC/PC24B 615 18.0 14.9 14.00 12.00 T*9X*B12 17.5 FC/MC/PC30B 615 18.0 14.9 14.00 12.00 T*9X*B12 17.5 UC18B 17 590.0 18.5 13.90 14.50 T*9X*B12 17.5 UC24B 17 615.0 18.9 14.20 14.50 T*9X*B12 17.5 UC30B 17 615.0 18.9 14.20 14.50 Y*(8,L)C*A12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30 Y*(8,L)C*A12 14.5 FC/MC/PC24A 640 18.0 12.7 14.80 12.50 Y*(8,L)C*A12 14.5 FC/MC/PC30A 640 18.0 12.7 14.80 12.50 Y*(8,L)C*A12 14.5 UC18A 620 18.0 12.4 14.60 12.30 Y*(8,L)C*A12 14.5 UC24A 640 18.0 12.8 14.80 12.50 Y*(8,L)C*A12 14.5 UC30A 640 18.0 12.8 14.80 12.50 Y*(8,L)C*B12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30 Y*(8,L)C*B12 17.5 FC/MC/PC24B 575 18.0 12.2 14.90 12.60 Y*(8,L)C*B12 17.5 FC/MC/PC30B 575 18.0 12.2 14.90 12.60 Y*(8,L)C*B12 17.5 UC18B 580 18.0 12.0 14.60 12.30 Y*(8,L)C*B12 17.5 UC24B 575 18.0 12.3 14.90 12.60 Y*(8,L)C*B12 17.5 UC30B 575 18.0 12.3 15.00 12.60 Y*9C*B12 17.5 FC/MC/PC18B 610 18.0 12.2 14.60 12.40 Y*9C*B12 17.5 FC/MC/PC24B 610 18.0 12.7 14.90 12.60 Y*9C*B12 17.5 FC/MC/PC30B 610 18.0 12.7 14.90 12.60 Y*9C*B12 17.5 UC18B 610 18.0 12.3 14.80 12.40 Y*9C*B12 17.5 UC24B 610 18.0 12.8 14.90 12.60 Y*9C*B12 17.5 UC30B 610 18.0 12.8 15.00 12.60 For Notes See Page 12. Johnson Controls Unitary Products 7 571209-YTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 YHJD24S41S4 T*(8,L)V*A12 14.5 FC/MC/PC32A 775 24.0 17.2 14.00 12.00 T*(8,L)V*A12 14.5 FC/MC/PC37A 805 24.0 17.3 14.50 12.00 T*(8,L)V*B12 17.5 FC/MC/PC35B 760 24.0 17.2 14.00 12.00 T*(8,L)V*B12 17.5 FC/MC/PC43B 760 24.0 17.2 14.00 12.00 T*(8,L)V*C16 21.0 FC/MC/PC35C 855 24.0 17.6 14.50 12.00 T*(8,L)V*C16 21.0 FC/MC/PC43C 895 24.0 18.1 14.50 12.00 T*(8,L)V*C20 21.0 FC/MC/PC35C 740 24.0 17.0 14.50 12.00 T*(8,L)V*C20 21.0 FC/MC/PC43C 760 24.0 17.2 14.50 12.00 T*(8,L)X*A12 14.5 FC/MC/PC32A 800 24.0 17.5 14.50 12.00 T*(8,L)X*A12 14.5 FC/MC/PC37A 840 24.0 17.8 14.50 12.00 T*(8,L)X*B12 17.5 FC/MC/PC35B 850 24.0 17.6 14.50 12.00 T*(8,L)X*B12 17.5 FC/MC/PC43B 865 24.0 18.0 14.50 12.00 T*(8,L)X*C16 21.0 FC/MC/PC35C 865 24.0 17.6 14.50 12.00 T*(8,L)X*C16 21.0 FC/MC/PC43C 855 24.0 17.9 14.50 12.00 T*(8,L)X*C20 21.0 FC/MC/PC35C 885 24.0 17.6 14.50 12.00 T*(8,L)X*C20 21.0 FC/MC/PC43C 815 24.0 17.3 14.50 12.00 T*9V*A10 14.5 FC/MC/PC32A 785 24.0 18.0 13.75 12.00 T*9V*A10 14.5 FC/MC/PC37A 790 24.0 18.4 13.85 12.00 T*9(C,V)*B12 17.5 FC/MC/PC35B 815 24.0 17.6 14.00 12.00 T*9(C,V)*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00 T*9(C,V)*C16 21.0 FC/MC/PC35C 900 24.0 18.1 14.50 12.00 T*9(C,V)*C16 21.0 FC/MC/PC43C 810 24.0 17.3 14.50 12.00 T*9(C,V)*C20 21.0 FC/MC/PC35C 755 24.0 17.2 14.50 12.00 T*9(C,V)*C20 21.0 FC/MC/PC43C 890 24.0 18.1 14.50 12.00 T*9X*A10 14.5 FC/MC/PC32A 745 24.0 17.6 13.75 12.00 T*9X*A10 14.5 FC/MC/PC37A 740 24.0 17.7 14.00 12.00 T*9X*B12 17.5 FC/MC/PC35B 785 24.0 17.4 14.50 12.00 T*9X*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00 T*9X*C16 21.0 FC/MC/PC35C 765 24.0 17.3 14.50 12.00 T*9X*C16 21.0 FC/MC/PC43C 785 24.0 17.3 14.50 12.00 T*9X*C20 21.0 FC/MC/PC35C 825 24.0 17.6 14.50 12.00 T*9X*C20 21.0 FC/MC/PC43C 790 24.0 17.3 14.50 12.00 Y*(8,L)C*A12 14.5 FC/MC/PC32A 775 24.0 17.2 14.00 12.00 Y*(8,L)C*A12 14.5 FC/MC/PC37A 805 24.0 17.3 14.50 12.00 Y*(8,L)C*B12 17.5 FC/MC/PC35B 760 24.0 17.2 14.00 12.00 Y*(8,L)C*B12 17.5 FC/MC/PC43B 760 24.0 17.2 14.00 12.00 Y*(8,L)C*C16 21.0 FC/MC/PC35C 855 24.0 17.6 14.50 12.00 Y*(8,L)C*C16 21.0 FC/MC/PC43C 895 24.0 18.1 14.50 12.00 Y*(8,L)C*C20 21.0 FC/MC/PC35C 740 24.0 17.0 14.50 12.00 Y*(8,L)C*C20 21.0 FC/MC/PC43C 760 24.0 17.2 14.50 12.00 Y*9C*B12 17.5 FC/MC/PC35B 815 24.0 17.6 14.00 12.00 Y*9C*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00 Y*9C*C16 21.0 FC/MC/PC35C 900 24.0 18.1 14.50 12.00 Y*9C*C16 21.0 FC/MC/PC43C 810 24.0 17.3 14.50 12.00 Y*9C*C20 21.0 FC/MC/PC35C 755 24.0 17.2 14.50 12.00 Y*9C*C20 21.0 FC/MC/PC43C 890 24.0 18.1 14.50 12.00 For Notes See Page 12. 8 Johnson Controls Unitary Products 571209-YTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 YHJD30S41S4 YHJD36S41S4 T*(8,L)V*A12 14.5 FC/MC/PC32A 1045 30.0 22.0 13.50 11.00 T*(8,L)V*A12 14.5 FC/MC/PC37A 950 30.0 22.0 14.50 12.00 T*(8,L)V*B12 17.5 FC/MC/PC35B 995 30.0 22.0 14.50 12.00 T*(8,L)V*B12 17.5 FC/MC/PC43B 1040 30.0 22.8 14.50 12.00 T*(8,L)V*C16 21.0 FC/MC/PC35C 1025 30.0 22.0 14.50 12.00 T*(8,L)V*C16 21.0 FC/MC/PC43C 990 30.0 22.2 14.50 12.00 T*(8,L)V*C20 21.0 FC/MC/PC35C 1080 30.0 23.0 14.50 12.00 T*(8,L)V*C20 21.0 FC/MC/PC43C 1000 30.0 22.2 14.50 12.00 T*(8,L)X*A12 14.5 FC/MC/PC32A 970 30.0 22.0 14.00 12.00 T*(8,L)X*A12 14.5 FC/MC/PC37A 1105 30.0 23.2 14.50 12.00 T*(8,L)X*B12 17.5 FC/MC/PC35B 1120 30.0 23.2 14.50 12.00 T*(8,L)X*B12 17.5 FC/MC/PC43B 1125 30.0 23.4 14.50 12.00 T*(8,L)X*C16 21.0 FC/MC/PC35C 1105 30.0 23.2 14.50 12.00 T*(8,L)X*C16 21.0 FC/MC/PC43C 955 30.0 22.2 14.50 12.00 T*(8,L)X*C20 21.0 FC/MC/PC35C 850 29.8 21.4 14.50 12.00 T*(8,L)X*C20 21.0 FC/MC/PC43C 870 30.0 21.6 14.50 12.00 T*9(C,V)*B12 17.5 FC/MC/PC35B 1045 30.0 22.0 14.00 11.50 T*9(C,V)*B12 17.5 FC/MC/PC43B 1035 30.0 22.2 14.50 12.00 T*9(C,V)*C16 21.0 FC/MC/PC35C 1005 30.0 22.0 14.50 12.00 T*9(C,V)*C16 21.0 FC/MC/PC43C 1030 30.0 22.2 14.50 12.00 T*9(C,V)*C20 21.0 FC/MC/PC35C 985 30.0 22.0 14.50 12.00 T*9(C,V)*C20 21.0 FC/MC/PC43C 995 30.0 22.2 14.50 12.00 T*9X*B12 17.5 FC/MC/PC35B 1085 30.0 23.0 14.50 12.00 T*9X*B12 17.5 FC/MC/PC43B 1095 30.0 23.2 14.50 12.00 T*9X*C16 21.0 FC/MC/PC35C 1075 30.0 23.0 14.50 12.00 T*9X*C16 21.0 FC/MC/PC43C 1055 30.0 22.8 14.50 12.00 T*9X*C20 21.0 FC/MC/PC35C 835 29.8 21.2 14.50 12.00 T*9X*C20 21.0 FC/MC/PC43C 720 29.2 19.9 14.50 12.00 Y*(8,L)C*A12 14.5 FC/MC/PC32A 1045 30.0 22.0 13.50 11.00 Y*(8,L)C*A12 14.5 FC/MC/PC37A 950 30.0 22.0 14.50 12.00 Y*(8,L)C*B12 17.5 FC/MC/PC35B 995 30.0 22.0 14.50 12.00 Y*(8,L)C*B12 17.5 FC/MC/PC43B 1040 30.0 22.8 14.50 12.00 Y*(8,L)C*C16 21.0 FC/MC/PC35C 1025 30.0 22.0 14.50 12.00 Y*(8,L)C*C16 21.0 FC/MC/PC43C 990 30.0 22.2 14.50 12.00 Y*(8,L)C*C20 21.0 FC/MC/PC35C 1080 30.0 23.0 14.50 12.00 Y*(8,L)C*C20 21.0 FC/MC/PC43C 1000 30.0 22.2 14.50 12.00 Y*9C*B12 17.5 FC/MC/PC35B 1045 30.0 22.0 14.00 11.50 Y*9C*B12 17.5 FC/MC/PC43B 1035 30.0 22.2 14.50 12.00 Y*9C*C16 21.0 FC/MC/PC35C 1005 30.0 22.0 14.50 12.00 Y*9C*C16 21.0 FC/MC/PC43C 1030 30.0 22.2 14.50 12.00 Y*9C*C20 21.0 FC/MC/PC35C 985 30.0 22.0 14.50 12.00 Y*9C*C20 21.0 FC/MC/PC43C 995 30.0 22.2 14.50 12.00 T*(8,L)V*A12 14.5 FC/MC/PC37A 1150 36.0 26.4 13.75 11.50 T*(8,L)V*B12 17.5 FC/MC/PC43B 1270 36.0 27.2 13.75 11.50 T*(8,L)V*C16 21.0 FC/MC/PC43C 1205 36.0 26.8 14.50 12.00 T*(8,L)V*C16 21.0 FC/MC/PC48C 1210 36.0 26.6 14.50 12.00 T*(8,L)V*C16 21.0 UC48C 1210 36.0 26.8 14.50 12.00 T*(8,L)V*C20 21.0 FC/MC/PC43C 1190 36.0 26.8 14.50 12.00 For Notes See Page 12. Johnson Controls Unitary Products 9 571209-YTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 YHJD36S41S4 T*(8,L)V*C20 21.0 FC/MC/PC48C 1155 36.0 26.6 14.50 12.00 T*(8,L)V*C20 21.0 UC48C 1155 36.0 26.8 14.50 12.00 T*(8,L)X*A12 14.5 FC/MC/PC37A 1290 36.0 27.6 14.50 12.00 T*(8,L)X*B12 17.5 FC/MC/PC43B 1300 36.0 27.6 14.50 12.00 T*(8,L)X*C16 21.0 FC/MC/PC43C 1175 36.0 26.8 14.50 12.00 T*(8,L)X*C16 21.0 FC/MC/PC48C 1185 36.0 26.6 14.50 12.00 T*(8,L)X*C16 21.0 UC48C 1185 36.0 26.8 14.50 12.00 T*(8,L)X*C20 21.0 FC/MC/PC43C 1250 36.0 27.4 14.50 12.00 T*(8,L)X*C20 21.0 FC/MC/PC48C 1270 36.0 27.2 14.50 12.00 T*(8,L)X*C20 21.0 UC48C 1270 36.0 27.4 14.50 12.00 T*9(C,V)*B12 17.5 FC/MC/PC43B 1200 36.0 26.8 14.00 11.50 T*9(C,V)*C16 21.0 FC/MC/PC43C 1240 36.0 27.0 14.00 12.00 T*9(C,V)*C16 21.0 FC/MC/PC48C 1195 36.0 26.6 14.50 12.00 T*9(C,V)*C16 21.0 UC48C 1195 36.0 26.8 14.50 12.00 T*9(C,V)*C20 21.0 FC/MC/PC43C 1200 36.0 26.8 14.50 12.00 T*9(C,V)*C20 21.0 FC/MC/PC48C 1330 36.0 27.6 14.50 12.00 T*9(C,V)*C20 21.0 UC48C 1330 36.0 27.8 14.50 12.00 T*9(C,V)*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00 T*9(C,V)*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00 T*9X*B12 17.5 FC/MC/PC43B 1270 36.0 27.4 14.50 12.00 T*9X*C16 21.0 FC/MC/PC43C 1260 36.0 27.4 14.50 12.00 T*9X*C16 21.0 FC/MC/PC48C 1280 36.0 27.2 14.50 12.00 T*9X*C16 21.0 UC48C 1280 36.0 27.4 14.50 12.00 T*9X*C20 21.0 FC/MC/PC43C 1185 36.0 26.8 14.50 12.00 T*9X*C20 21.0 FC/MC/PC48C 1205 36.0 26.6 14.50 12.00 T*9X*C20 21.0 UC48C 1205 36.0 26.8 14.50 12.00 T*9X*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00 T*9X*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00 Y*(8,L)C*A12 14.5 FC/MC/PC37A 1150 36.0 26.4 13.75 11.50 Y*(8,L)C*B12 17.5 FC/MC/PC43B 1270 36.0 27.2 13.75 11.50 Y*(8,L)C*C16 21.0 FC/MC/PC43C 1205 36.0 26.8 14.50 12.00 Y*(8,L)C*C16 21.0 FC/MC/PC48C 1210 36.0 26.6 14.50 12.00 Y*(8,L)C*C16 21.0 UC48C 1210 36.0 26.8 14.50 12.00 Y*(8,L)C*C20 21.0 FC/MC/PC43C 1190 36.0 26.8 14.50 12.00 Y*(8,L)C*C20 21.0 FC/MC/PC48C 1155 36.0 26.6 14.50 12.00 Y*(8,L)C*C20 21.0 UC48C 1155 36.0 26.8 14.50 12.00 Y*9C*B12 17.5 FC/MC/PC43B 1200 36.0 26.8 14.00 11.50 Y*9C*C16 21.0 FC/MC/PC43C 1240 36.0 27.0 14.00 12.00 Y*9C*C16 21.0 FC/MC/PC48C 1195 36.0 26.6 14.50 12.00 Y*9C*C16 21.0 UC48C 1195 36.0 26.8 14.50 12.00 Y*9C*C20 21.0 FC/MC/PC43C 1200 36.0 26.8 14.50 12.00 Y*9C*C20 21.0 FC/MC/PC48C 1330 36.0 27.6 14.50 12.00 Y*9C*C20 21.0 UC48C 1330 36.0 27.8 14.50 12.00 Y*9C*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00 Y*9C*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00 For Notes See Page 12. 10 Johnson Controls Unitary Products 571209-YTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 12.00 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 YHJD42S41S4 YHJD48S41S4 T*(8,L)V*C16 21.0 FC/PC60C 1420 41.5 32.2 14.00 T*(8,L)V*C16 21.0 UC60C 1420 41.0 31.4 13.75 11.50 T*(8,L)V*C20 21.0 FC/PC60C 1410 42.0 32.4 14.00 12.00 T*(8,L)V*C20 21.0 UC60C 1410 41.0 31.4 14.00 12.00 T*(8,L)X*C16 21.0 FC/PC60C 1360 42.0 32.6 14.50 12.00 T*(8,L)X*C16 21.0 UC60C 1400 41.5 31.6 14.00 12.00 T*(8,L)X*C20 21.0 FC/PC60C 1485 42.0 33.4 14.50 12.00 T*(8,L)X*C20 21.0 UC60C 1485 41.5 32.8 14.00 12.00 T*9(C,V)*C16 21.0 FC/PC60C 1445 41.0 32.0 13.25 11.50 T*9(C,V)*C16 21.0 UC60C 1445 40.5 31.0 13.20 11.50 T*9(C,V)*C20 21.0 FC/PC60C 1445 41.5 32.0 13.75 11.50 T*9(C,V)*C20 21.0 UC60C 1445 41.0 31.2 13.50 11.50 T*9(C,V)*D20 24.5 FC/MC/PC60D 1445 41.5 32.2 13.75 11.50 T*9(C,V)*D20 24.5 UC60D 1445 41.0 31.4 13.50 11.50 T*9X*C16 21.0 FC/PC60C 1460 42.0 33.2 14.00 12.00 T*9X*C16 21.0 UC60C 1460 41.0 31.4 13.75 11.50 T*9X*C20 21.0 FC/PC60C 1460 42.0 33.2 14.50 12.00 T*9X*C20 21.0 UC60C 1460 41.5 31.6 14.00 12.00 T*9X*D20 24.5 FC/MC/PC60D 1515 42.0 33.6 14.50 12.00 T*9X*D20 24.5 UC60D 1515 42.0 33.2 14.50 12.00 Y*(8,L)C*C16 21.0 FC/PC60C 1420 41.5 32.2 14.00 12.00 Y*(8,L)C*C16 21.0 UC60C 1420 41.0 31.4 13.75 11.50 Y*(8,L)C*C20 21.0 FC/PC60C 1410 42.0 32.4 14.00 12.00 Y*(8,L)C*C20 21.0 UC60C 1410 41.0 31.4 14.00 12.00 Y*9C*C16 21.0 FC/PC60C 1445 41.0 32.0 13.25 11.50 Y*9C*C16 21.0 UC60C 1445 40.5 31.0 13.20 11.50 Y*9C*C20 21.0 FC/PC60C 1445 41.5 32.0 13.75 11.50 Y*9C*C20 21.0 UC60C 1445 41.0 31.2 13.50 11.50 Y*9C*D20 24.5 FC/MC/PC60D 1445 41.5 32.2 13.75 11.50 Y*9C*D20 24.5 UC60D 1445 41.0 31.4 13.50 11.50 T*(8,L)V*C16 21.0 FC/MC62D 1635 45.0 34.2 14.50 12.00 T*(8,L)V*C16 21.0 FC/PC60C 1600 44.5 33.6 14.00 12.00 T*(8,L)V*C16 21.0 UC60C 1625 44.0 33.0 14.00 12.00 T*(8,L)V*C20 21.0 FC/MC62D 1615 45.0 34.2 14.50 12.00 T*(8,L)V*C20 21.0 FC/PC60C 1620 44.5 33.8 14.00 12.00 T*(8,L)V*C20 21.0 UC60C 1605 44.5 33.2 14.50 12.00 T*(8,L)X*C16 21.0 FC/MC62D 1610 45.0 34.2 14.50 12.00 T*(8,L)X*C16 21.0 FC/PC60C 1605 44.5 33.8 14.50 12.00 T*(8,L)X*C16 21.0 UC60C 1605 44.5 33.2 14.50 12.00 T*(8,L)X*C20 21.0 FC/MC62D 1665 45.5 34.4 14.50 12.00 T*(8,L)X*C20 21.0 FC/PC60C 1595 44.5 34.0 14.50 12.00 T*(8,L)X*C20 21.0 UC60C 1540 45.0 33.6 14.50 12.00 T*9(C,V)*C16 21.0 FC/MC62D 1590 45.0 34.0 14.00 12.00 T*9(C,V)*C16 21.0 FC/PC60C 1590 44.0 33.6 14.00 12.00 T*9(C,V)*C16 21.0 UC60C 1590 44.0 33.0 14.00 12.00 T*9(C,V)*C20 21.0 FC/MC62D 1655 44.5 33.8 14.00 12.00 T*9(C,V)*C20 21.0 FC/PC60C 1645 44.0 33.6 14.00 12.00 T*9(C,V)*C20 21.0 UC60C 1645 44.0 33.0 13.75 11.50 For Notes See Page 12. Johnson Controls Unitary Products 11 571209-YTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 YHJD48S41S4 YHJD60S41S5 T*9(C,V)*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00 T*9(C,V)*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00 T*9(C,V)*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00 T*9X*C16 21.0 FC/MC62D 1550 45.0 34.2 14.50 12.00 T*9X*C16 21.0 FC/PC60C 1575 44.5 33.8 14.50 12.00 T*9X*C16 21.0 UC60C 1575 44.5 33.2 14.50 12.00 T*9X*C20 21.0 FC/MC62D 1595 45.0 34.2 14.50 12.00 T*9X*C20 21.0 FC/PC60C 1625 44.5 34.0 14.50 12.00 T*9X*C20 21.0 UC60C 1625 44.5 33.2 14.50 12.00 T*9X*D20 24.5 FC/MC/PC60D 1490 45.5 33.6 14.50 12.00 T*9X*D20 24.5 FC/MC62D 1610 45.0 34.2 14.50 12.00 T*9X*D20 24.5 UC60D 1490 44.5 32.8 14.50 12.00 Y*(8,L)C*C16 21.0 FC/MC62D 1635 45.0 34.2 14.50 12.00 Y*(8,L)C*C16 21.0 FC/PC60C 1600 44.5 33.6 14.00 12.00 Y*(8,L)C*C16 21.0 UC60C 1625 44.0 33.0 14.00 12.00 Y*(8,L)C*C20 21.0 FC/MC62D 1615 45.0 34.2 14.50 12.00 Y*(8,L)C*C20 21.0 FC/PC60C 1620 44.5 33.8 14.00 12.00 Y*(8,L)C*C20 21.0 UC60C 1605 44.5 33.2 14.50 12.00 Y*9C*C16 21.0 FC/MC62D 1590 45.0 34.0 14.00 12.00 Y*9C*C16 21.0 FC/PC60C 1590 44.0 33.6 14.00 12.00 Y*9C*C16 21.0 UC60C 1590 44.0 33.0 14.00 12.00 Y*9C*C20 21.0 FC/MC62D 1655 44.5 33.8 14.00 12.00 Y*9C*C20 21.0 FC/PC60C 1645 44.0 33.6 14.00 12.00 Y*9C*C20 21.0 UC60C 1645 44.0 33.0 13.75 11.50 Y*9C*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00 Y*9C*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00 Y*9C*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00 T*(8,L)V*C20 21.0 FC/MC62D 1600 57.0 39.5 13.70 11.60 T*(8,L)V*C20 21.0 FC64D 1855 57.0 42.5 13.25 11.40 T*(8,L)X*C20 21.0 FC/MC62D 1665 57.5 40.0 14.00 12.00 T*(8,L)X*C20 21.0 FC64D 1665 56.0 41.0 13.75 11.60 T*9(C,V)*C20 21.0 FC/MC62D 1655 57.0 39.5 13.50 11.60 T*9(C,V)*C20 21.0 FC64D 1630 55.5 40.5 13.25 11.40 T*9(C,V)*D20 24.5 FC/MC62D 1630 57.5 39.5 13.70 11.60 T*9(C,V)*D20 24.5 FC64D 1630 55.5 40.0 13.25 11.40 T*9X*C20 21.0 FC/MC62D 1595 57.5 40.0 14.00 12.00 T*9X*C20 21.0 FC64D 1595 55.5 40.0 13.50 11.40 T*9X*D20 24.5 FC/MC62D 1645 57.5 40.0 14.00 12.00 T*9X*D20 24.5 FC64D 1645 56.0 40.5 13.50 11.40 Y*(8,L)C*C20 21.0 FC/MC62D 1600 57.0 39.5 13.70 11.60 Y*(8,L)C*C20 21.0 FC64D 1855 57.0 42.5 13.25 11.40 Y*9C*C20 21.0 FC/MC62D 1655 57.0 39.5 13.50 11.60 Y*9C*C20 21.0 FC64D 1655 55.5 40.5 13.20 11.30 Y*9C*D20 24.5 FC/MC62D 1630 57.5 39.5 13.70 11.60 Y*9C*D20 24.5 FC64D 1630 55.5 40.0 13.25 11.40 1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. 2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. 12 Johnson Controls Unitary Products 571209-YTG-C-1012 HEATING CAPACITY - With Air Handler UNIT MODEL AIR HANDLER HEATING2 COIL1 MODEL 47 F MBH COP 17 F HSPF KW MBH COP KW STD 13 SEER HP WITH AIR HANDLERS YHJD18S41S2 YHJD24S41S4 YHJD30S41S4 YHJD36S41S4 AHE18B – 18.0 3.70 1.43 11.1 2.28 1.43 7.70 AHR18B – 18.0 3.54 1.49 11.4 2.22 1.50 7.70 AHV18B – 18.0 3.50 1.51 11.1 2.22 1.46 8.00 AV*24 – 18.0 3.66 1.36 9.9 2.78 1.06 8.20 MV12B FC/MC18B 18.0 3.58 1.39 8.6 2.52 1.24 7.95 MV12B FC/MC24B 18.0 3.62 1.36 10.6 2.88 1.03 8.10 MV12B FC/MC30B 18.0 3.62 1.36 10.6 2.88 1.03 8.10 MX12B FC/MC18B 18.0 3.70 1.43 11.0 2.28 1.41 8.20 MX12B FC/MC24B 18.0 3.98 1.33 10.9 2.46 1.30 8.20 MX12B FC/MC30B 18.0 3.98 1.33 10.9 2.46 1.30 8.20 AHE24B – 23.4 3.58 1.92 13.3 2.50 1.56 8.20 AHE30B – 23.4 3.58 1.92 13.3 2.50 1.56 8.20 AHR24B – 23.4 3.40 2.02 13.5 2.40 1.65 7.70 AHV24B – 22.6 3.46 1.91 13.2 2.50 1.55 8.00 AHV30B – 23.0 3.52 1.91 13.3 2.50 1.56 8.20 AHV36C – 23.4 3.64 1.88 13.3 2.56 1.52 8.20 AV*36 – 23.2 3.64 1.87 13.3 2.62 1.49 8.20 MV12B FC/MC35B 23.2 3.56 1.91 13.3 2.54 1.53 8.20 MV12B FC/MC43B 23.8 3.66 1.91 13.5 2.60 1.52 8.20 MX12B FC/MC35B 23.2 3.64 1.87 13.0 2.56 1.49 8.20 MX12B FC/MC43B 23.2 3.62 1.88 13.0 2.54 1.50 8.20 AHE30B – 26.6 3.40 2.29 15.5 2.42 1.88 7.70 AHE36C – 26.8 3.56 2.21 15.3 2.50 1.79 7.70 AHR30B – 27.6 3.30 2.45 16.2 2.32 2.05 7.70 AHR36B – 27.8 3.36 2.42 16.2 2.32 2.05 7.70 AHV30B – 28.0 3.48 2.36 15.5 2.30 1.97 7.70 AHV36C – 27.6 3.62 2.23 15.0 2.42 1.82 8.20 AV*36 – 27.2 3.66 2.18 15.4 2.54 1.78 8.20 MV12B FC/MC35B 26.8 3.50 2.24 15.4 2.48 1.82 8.00 MV12B FC/MC43B 27.4 3.58 2.24 15.6 2.46 1.86 8.20 MV16C FC/MC35C 27.0 3.56 2.22 15.4 2.50 1.80 8.15 MV16C FC/MC43C 27.4 3.60 2.23 15.5 2.48 1.83 8.20 MX12B FC/MC35B 26.8 3.46 2.27 15.5 2.44 1.86 7.70 MX12B FC/MC43B 27.2 3.56 2.24 15.6 2.48 1.84 7.70 MX16C FC/MC35C 26.4 3.56 2.17 15.2 2.52 1.77 7.70 MX16C FC/MC43C 26.4 3.56 2.17 15.2 2.50 1.78 7.70 AHE36C – 30.6 3.44 2.61 21.6 2.84 2.23 8.20 AHE42D – 30.6 3.48 2.93 21.4 2.88 2.42 8.20 AHR36B – 31.4 3.28 2.80 22.6 2.68 2.47 7.70 AHR42C – 31.4 3.32 2.77 22.2 2.70 2.41 7.70 AHV36C – 30.8 3.42 2.64 22.0 2.78 2.32 8.00 AHV42D – 30.6 3.46 2.59 21.6 2.88 2.20 8.20 AV*36 – 33.8 3.60 2.75 21.8 2.80 2.28 8.20 MV12B FC/MC43B 34.2 3.58 2.80 21.8 2.76 2.31 8.20 MV12D FC/MC48D 33.8 3.70 2.68 21.6 2.86 2.21 8.20 MV16C FC/MC43C 33.8 3.60 2.75 21.6 2.78 2.28 8.20 MV16C FC/MC48C 34.0 3.64 2.74 21.8 2.82 2.27 8.20 MX12B FC/MC43B 30.8 3.38 2.67 21.8 2.78 2.30 7.70 MX12D FC/MC48D 30.8 3.48 2.59 21.6 2.84 2.23 8.20 MX16C FC/MC43C 30.2 3.44 2.57 21.0 2.84 2.17 7.70 MX16C FC/MC48C 30.2 3.48 2.54 21.4 2.88 2.18 7.70 For Notes See Page 14. Johnson Controls Unitary Products 13 571209-YTG-C-1012 HEATING CAPACITY - With Air Handler (Continued) UNIT MODEL AIR HANDLER HEATING2 COIL1 MODEL 47 F MBH COP 17 F HSPF KW MBH COP KW STD 13 SEER HP WITH AIR HANDLERS YHJD42S41S4 YHJD48S41S4 YHJD60S41S5 AHE48D – 39.0 3.90 3.00 21.8 2.64 2.52 8.20 AHR48D – 40.0 3.66 3.20 22.4 2.48 2.65 7.70 AHV48D – 39.5 3.86 3.00 21.0 2.54 2.42 8.20 AV*48 – 39.5 3.96 2.92 22.2 2.68 2.43 8.20 AV*60 – 39.5 3.98 2.91 22.2 2.70 2.41 8.20 MV16C FC60C 40.0 3.86 3.04 21.4 2.50 2.51 8.20 MV20D FC/MC60D 39.5 3.94 2.94 22.2 2.66 2.45 8.20 MX16C FC60C 40.0 4.08 2.87 22.0 2.66 2.42 8.20 MX20D FC/MC60D 40.0 4.10 2.86 21.8 2.68 2.38 8.20 AHE48D – 45.5 3.68 3.62 26.8 2.84 2.76 8.20 AHE60D – 44.5 3.72 3.50 26.4 2.90 2.67 8.20 AHR48D – 46.0 3.56 3.79 27.4 2.74 2.93 7.70 AHR60D – 45.5 3.52 3.79 27.2 2.74 2.91 7.75 AHV48D – 44.5 3.56 3.66 26.4 2.78 2.78 8.20 AHV60D – 45.0 3.62 3.64 26.8 2.82 2.78 8.20 AV*48 – 46.0 3.78 3.57 26.8 2.90 2.71 8.20 AV*60 – 45.5 3.80 3.51 26.8 2.94 2.67 8.20 MV16C FC60C 45.0 3.70 3.56 26.6 2.90 2.69 8.20 MV20D FC/MC60D 45.5 3.72 3.58 27.0 2.86 2.77 8.20 MV20D FC/MC62D 45.0 3.72 3.54 26.6 2.90 2.69 8.20 MX16C FC60C 45.0 3.80 3.47 26.2 2.96 2.59 8.20 MX20D FC/MC60D 45.5 3.84 3.47 26.6 2.94 2.65 8.20 MX20D FC/MC62D 45.5 3.80 3.51 26.4 2.94 2.63 8.20 AHE60D – 58.0 3.54 5.01 39.0 2.76 4.14 8.20 AHR60D – 58.0 3.44 5.28 40.0 2.68 4.37 8.15 AHV60D – 58.0 3.42 5.18 39.0 2.68 4.26 8.15 MV20D FC/MC62D 58.0 3.52 5.08 39.0 2.72 4.20 8.20 MV20D FC64D 58.0 3.40 5.34 40.5 2.80 4.24 8.10 MX20D FC/MC62D 58.0 3.58 4.95 38.5 2.76 4.09 8.20 MX20D FC64D 58.0 3.44 5.20 40.0 2.86 4.10 8.15 1. Rated CFM same as for cooling. 2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. MA Modular Air Handlers use Coil Only Ratings. — = Not Applicable. 14 Johnson Controls Unitary Products 571209-YTG-C-1012 HEATING CAPACITY - Upflow, Downflow, and Horizontal Furnaces and Coils (Coil Only Ratings) UNIT MODEL HEATING2 COIL1 MODEL 47 F MBH COP 17 F KW HSPF MBH COP KW STD 13 SEER HP COIL ONLY RATINGS YHJD18S41S2 YHJD24S41S4 YHJD30S41S4 YHJD36S41S4 YHJD42S41S4 YHJD48S41S4 YHJD60S41S5 FC/MC/PC18 18.0 3.36 1.50 12.7 2.16 1.24 8.20 FC/MC/PC24 18.0 3.36 1.45 10.4 2.60 1.17 8.20 FC/MC/PC30 18.0 3.42 1.54 11.4 2.18 1.53 7.75 UC24 18.0 3.42 1.54 11.4 2.20 1.52 7.75 UC30 18.0 3.42 1.54 11.4 2.20 1.52 7.75 FC/MC/PC32 24.0 3.36 2.09 13.9 2.38 1.71 7.70 FC/MC/PC35 23.8 3.32 2.10 13.9 2.36 1.73 7.70 FC/MC/PC37 24.0 3.44 2.04 14.1 2.42 1.71 7.70 FC/MC/PC43 24.0 3.44 2.04 14.1 2.42 1.71 7.70 FC/MC/PC32 27.4 3.28 2.45 16.0 2.30 2.04 7.70 FC/MC/PC35 27.4 3.28 2.45 16.0 2.30 2.04 7.70 FC/MC/PC37 28.0 3.38 2.43 16.1 2.32 2.03 7.70 FC/MC/PC43 28.0 3.38 2.43 16.1 2.32 2.03 7.70 FC/MC/PC37 34.4 3.42 2.95 22.4 2.62 2.51 7.70 FC/MC/PC43 34.6 3.40 2.98 22.2 2.60 2.50 7.70 FC/MC/PC48 34.8 3.44 2.96 22.6 2.64 2.51 7.70 UC48 35.0 3.52 2.91 22.4 2.62 2.51 7.70 FC/MC/PC60 40.5 3.72 3.19 23.0 2.50 2.70 7.70 UC60 40.0 3.68 3.18 22.8 2.48 2.69 7.70 FC/MC/PC60 46.0 3.58 3.76 27.4 2.76 2.91 7.70 FC/MC62 46.0 3.54 3.81 27.4 2.76 2.91 7.70 UC60 46.0 3.56 3.79 27.4 2.74 2.93 7.70 FC/MC62 58.0 3.44 5.24 39.5 2.66 4.35 7.80 FC64 58.0 3.36 5.49 40.5 2.76 4.30 7.80 1. Rated CFM same as for cooling. 2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. MA Modular Air Handlers use Coil Only Ratings. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. — = Not Applicable. Johnson Controls Unitary Products 15 571209-YTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces MODEL YHJD18S41S2 FURNACE MODEL T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*B12 T*9V*A10 T*9V*A10 T*9V*A10 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*B12 T*9X*A10 T*9X*A10 T*9X*A10 T*9X*B12 T*9X*B12 T*9X*B12 T*9X*B12 T*9X*B12 T*9X*B12 Y*(8,L)C*A12 Y*(8,L)C*A12 Y*(8,L)C*A12 Y*(8,L)C*A12 Y*(8,L)C*A12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*(8,L)C*B12 Y*(8,L)C*B12 Y*(8,L)C*B12 COIL1 MODEL HEATING2 MBH 17 F COP KW HSPF STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3 FC/MC/PC18A 18.0 3.58 1.37 7.7 FC/MC/PC24A 18.0 3.70 1.36 10.6 FC/MC/PC30A 18.0 3.70 1.36 10.6 UC18A 18.0 3.62 1.37 9.1 UC24A 18.0 3.72 1.36 10.7 UC30A 18.0 3.72 1.36 10.7 FC/MC/PC18B 18.0 3.56 1.37 7.7 FC/MC/PC24B 18.0 3.68 1.34 10.1 FC/MC/PC30B 18.0 3.68 1.34 10.1 UC18B 18.0 3.60 1.36 9.7 UC24B 18.0 3.70 1.34 10.5 UC30B 18.0 3.70 1.34 10.4 FC/MC/PC18A 18.0 2.92 1.81 11.1 FC/MC/PC24A 18.0 3.16 1.67 10.9 FC/MC/PC30A 18.0 3.16 1.67 10.9 UC18B 18.0 3.60 1.55 11.1 UC24B 18.0 3.68 1.50 11.1 UC30B 18.0 3.68 1.50 11.1 FC/MC/PC18B 18.0 3.00 1.76 11.0 FC/MC/PC24B 18.0 3.16 1.67 10.9 FC/MC/PC30B 18.0 3.16 1.67 10.9 UC18B 18.0 3.58 1.56 11.1 UC24B 18.0 3.66 1.52 11.0 UC30B 18.0 3.66 1.52 11.0 FC/MC/PC18A 18.0 3.44 1.62 11.2 FC/MC/PC24A 18.0 3.60 1.55 11.1 FC/MC/PC30A 18.0 3.60 1.55 11.1 FC/MC/PC18B 18.0 3.60 1.36 7.7 FC/MC/PC24B 18.0 3.74 1.34 10.5 FC/MC/PC30B 18.0 3.74 1.34 10.5 UC18B 18.0 3.64 1.35 9.1 UC24B 18.0 3.76 1.34 10.7 UC30B 18.0 3.76 1.34 10.7 FC/MC/PC18A 18.0 3.46 1.61 11.2 FC/MC/PC24A 18.0 3.62 1.55 11.1 FC/MC/PC30A 18.0 3.62 1.55 11.1 FC/MC/PC18B 18.0 3.00 1.76 11.0 FC/MC/PC24B 18.0 3.16 1.67 10.9 FC/MC/PC30B 18.0 3.16 1.67 10.9 UC18B 18.0 3.60 1.55 11.1 UC24B 18.0 3.72 1.49 10.9 UC30B 18.0 3.72 1.49 10.9 FC/MC/PC18A 18.0 3.58 1.37 7.7 FC/MC/PC24A 18.0 3.70 1.36 10.6 FC/MC/PC30A 18.0 3.70 1.36 10.6 UC18A 18.0 3.62 1.37 9.1 UC24A 18.0 3.72 1.36 10.7 UC30A 18.0 3.72 1.36 10.7 FC/MC/PC18B 18.0 3.56 1.37 7.7 FC/MC/PC24B 18.0 3.68 1.34 10.1 FC/MC/PC30B 18.0 3.68 1.34 10.1 UC18B 18.0 3.60 1.36 9.7 2.28 2.90 2.90 2.58 2.94 2.94 2.30 2.88 2.88 2.74 2.96 2.96 2.24 2.44 2.44 2.26 2.02 2.02 2.28 2.44 2.44 2.24 2.34 2.34 2.18 2.28 2.28 2.30 2.94 2.94 2.62 2.96 2.96 2.18 2.28 2.28 2.30 2.42 2.42 2.26 2.36 2.36 2.28 2.90 2.90 2.58 2.94 2.94 2.30 2.88 2.88 2.74 0.99 1.07 1.07 1.03 1.07 1.07 0.98 1.03 1.03 1.04 1.04 1.03 1.45 1.31 1.31 1.44 1.61 1.61 1.41 1.31 1.31 1.45 1.38 1.38 1.51 1.43 1.43 0.98 1.05 1.05 1.02 1.06 1.06 1.51 1.43 1.43 1.40 1.32 1.32 1.44 1.35 1.35 0.99 1.07 1.07 1.03 1.07 1.07 0.98 1.03 1.03 1.04 8.00 8.30 8.30 8.10 8.30 8.30 7.90 8.20 8.20 8.00 8.20 8.20 8.10 8.20 8.20 8.20 8.15 8.15 8.15 8.20 8.20 8.20 8.10 8.10 7.90 7.95 7.95 8.00 8.30 8.30 8.10 8.30 8.30 7.90 7.90 7.90 8.10 8.20 8.20 8.20 8.15 8.15 8.00 8.30 8.30 8.10 8.30 8.30 7.90 8.20 8.20 8.00 MBH 47 F COP KW For Notes See Page 21. 16 Johnson Controls Unitary Products 571209-YTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) MODEL YHJD18S41S2 YHJD24S41S4 FURNACE MODEL Y*(8,L)C*B12 Y*(8,L)C*B12 Y*9C*B12 Y*9C*B12 Y*9C*B12 Y*9C*B12 Y*9C*B12 Y*9C*B12 T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C20 T*(8,L)X*C20 T*9V*A10 T*9V*A10 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9X*A10 T*9X*A10 T*9X*B12 T*9X*B12 T*9X*C16 T*9X*C16 T*9X*C20 T*9X*C20 Y*(8,L)C*A12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*(8,L)C*B12 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*9C*B12 Y*9C*B12 Y*9C*C16 Y*9C*C16 Y*9C*C20 Y*9C*C20 COIL1 MODEL HEATING2 MBH 17 F COP KW HSPF STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3 UC24B 18.0 3.70 1.34 10.5 UC30B 18.0 3.70 1.34 10.4 FC/MC/PC18B 18.0 3.60 1.36 7.7 FC/MC/PC24B 18.0 3.74 1.34 10.5 FC/MC/PC30B 18.0 3.74 1.34 10.5 UC18B 18.0 3.64 1.35 9.1 UC24B 18.0 3.76 1.34 10.7 UC30B 18.0 3.76 1.34 10.7 FC/MC/PC32A 23.4 3.52 1.95 13.5 FC/MC/PC37A 23.8 3.62 1.93 13.6 FC/MC/PC35B 23.0 3.50 1.93 13.2 FC/MC/PC43B 23.4 3.60 1.90 13.3 FC/MC/PC35C 23.6 3.62 1.91 13.4 FC/MC/PC43C 24.0 3.74 1.88 13.6 FC/MC/PC35C 22.8 3.54 1.89 13.0 FC/MC/PC43C 23.2 3.64 1.87 13.2 FC/MC/PC32A 23.2 3.64 1.87 13.3 FC/MC/PC37A 23.8 3.78 1.84 13.5 FC/MC/PC35B 23.4 3.68 1.86 13.3 FC/MC/PC43B 23.8 3.78 1.84 13.5 FC/MC/PC35C 23.4 3.68 1.86 13.3 FC/MC/PC43C 23.8 3.76 1.85 13.4 FC/MC/PC35C 23.6 3.62 1.91 13.4 FC/MC/PC43C 23.6 3.70 1.87 13.5 FC/MC/PC32A 24.0 3.48 1.99 13.5 FC/MC/PC37A 24.0 3.52 1.98 13.8 FC/MC/PC35B 23.6 3.58 1.93 13.6 FC/MC/PC43B 23.8 3.64 1.92 13.6 FC/MC/PC35C 23.8 3.62 1.93 13.6 FC/MC/PC43C 23.8 3.66 1.91 13.5 FC/MC/PC35C 23.0 3.52 1.91 13.1 FC/MC/PC43C 24.0 3.72 1.89 13.7 FC/MC/PC32A 24.0 3.44 1.96 13.3 FC/MC/PC37A 24.0 3.52 1.95 13.4 FC/MC/PC35B 23.0 3.58 1.88 13.2 FC/MC/PC43B 23.6 3.72 1.86 13.4 FC/MC/PC35C 23.0 3.56 1.89 13.1 FC/MC/PC43C 23.6 3.72 1.86 13.4 FC/MC/PC35C 23.4 3.66 1.87 13.4 FC/MC/PC43C 23.6 3.70 1.87 13.5 FC/MC/PC32A 23.4 3.52 1.95 13.5 FC/MC/PC37A 23.8 3.62 1.93 13.6 FC/MC/PC35B 23.0 3.50 1.93 13.2 FC/MC/PC43B 23.4 3.60 1.90 13.3 FC/MC/PC35C 23.6 3.62 1.91 13.4 FC/MC/PC43C 24.0 3.74 1.88 13.6 FC/MC/PC35C 22.8 3.54 1.89 13.0 FC/MC/PC43C 23.2 3.64 1.87 13.2 FC/MC/PC35B 23.6 3.58 1.93 13.6 FC/MC/PC43B 23.8 3.64 1.92 13.6 FC/MC/PC35C 23.8 3.62 1.93 13.6 FC/MC/PC43C 23.8 3.66 1.91 13.5 FC/MC/PC35C 23.0 3.52 1.91 13.1 FC/MC/PC43C 24.0 3.72 1.89 13.7 2.96 2.96 2.30 2.94 2.94 2.62 2.96 2.96 2.52 2.54 2.52 2.54 2.58 2.60 2.56 2.58 2.60 2.66 2.62 2.66 2.62 2.64 2.58 2.62 2.42 2.44 2.54 2.56 2.56 2.58 2.54 2.60 2.44 2.48 2.58 2.64 2.56 2.64 2.60 2.62 2.52 2.54 2.52 2.54 2.58 2.60 2.56 2.58 2.54 2.56 2.56 2.58 2.54 2.60 1.04 1.03 0.98 1.05 1.05 1.02 1.06 1.06 1.57 1.57 1.53 1.53 1.52 1.53 1.49 1.50 1.50 1.49 1.49 1.49 1.49 1.49 1.52 1.51 1.63 1.66 1.57 1.56 1.56 1.53 1.51 1.54 1.60 1.58 1.50 1.49 1.50 1.49 1.51 1.51 1.57 1.57 1.53 1.53 1.52 1.53 1.49 1.50 1.57 1.56 1.56 1.53 1.51 1.54 8.20 8.20 8.00 8.30 8.30 8.10 8.30 8.30 8.20 8.20 8.15 8.20 8.20 8.20 8.15 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 7.80 7.90 8.20 8.20 8.20 8.20 8.15 8.20 7.85 7.85 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.15 8.20 8.20 8.20 8.15 8.20 8.20 8.20 8.20 8.20 8.15 8.20 MBH 47 F COP KW For Notes See Page 21. Johnson Controls Unitary Products 17 571209-YTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) MODEL YHJD30S41S4 YHJD36S41S4 FURNACE MODEL T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9X*B12 T*9X*B12 T*9X*C16 T*9X*C16 T*9X*C20 T*9X*C20 Y*(8,L)C*A12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*(8,L)C*B12 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*9C*B12 Y*9C*B12 Y*9C*C16 Y*9C*C16 Y*9C*C20 Y*9C*C20 T*(8,L)V*A12 T*(8,L)V*B12 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C16 COIL1 MODEL HEATING2 MBH 17 F COP KW HSPF STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3 FC/MC/PC32A 27.4 3.30 2.43 16.0 FC/MC/PC37A 27.2 3.48 2.29 15.7 FC/MC/PC35B 27.0 3.42 2.31 15.6 FC/MC/PC43B 27.6 3.52 2.30 15.7 FC/MC/PC35C 26.8 3.48 2.26 15.5 FC/MC/PC43C 27.4 3.60 2.23 15.5 FC/MC/PC35C 27.2 3.50 2.28 15.5 FC/MC/PC43C 27.2 3.62 2.20 15.5 FC/MC/PC32A 27.0 3.42 2.31 15.6 FC/MC/PC37A 27.8 3.64 2.24 15.9 FC/MC/PC35B 27.4 3.52 2.28 15.6 FC/MC/PC43B 27.8 3.62 2.25 15.8 FC/MC/PC35C 27.2 3.56 2.24 15.4 FC/MC/PC43C 27.2 3.64 2.19 15.4 FC/MC/PC35C 26.0 3.40 2.24 14.9 FC/MC/PC43C 26.4 3.52 2.20 15.0 FC/MC/PC35B 27.2 3.36 2.37 15.8 FC/MC/PC43B 27.6 3.48 2.32 15.8 FC/MC/PC35C 26.8 3.46 2.27 15.5 FC/MC/PC43C 27.4 3.54 2.27 15.7 FC/MC/PC35C 26.8 3.46 2.27 15.5 FC/MC/PC43C 27.4 3.58 2.24 15.5 FC/MC/PC35B 27.2 3.50 2.28 15.5 FC/MC/PC43B 27.6 3.60 2.25 15.7 FC/MC/PC35C 27.0 3.52 2.25 15.5 FC/MC/PC43C 27.4 3.60 2.23 15.6 FC/MC/PC35C 25.8 3.42 2.21 14.7 FC/MC/PC43C 25.6 3.34 2.25 14.5 FC/MC/PC32A 27.4 3.30 2.43 16.0 FC/MC/PC37A 27.2 3.48 2.29 15.7 FC/MC/PC35B 27.0 3.42 2.31 15.6 FC/MC/PC43B 27.6 3.52 2.30 15.7 FC/MC/PC35C 26.8 3.48 2.26 15.5 FC/MC/PC43C 27.4 3.60 2.23 15.5 FC/MC/PC35C 27.2 3.50 2.28 15.5 FC/MC/PC43C 27.2 3.62 2.20 15.5 FC/MC/PC35B 27.2 3.36 2.37 15.8 FC/MC/PC43B 27.6 3.48 2.32 15.8 FC/MC/PC35C 26.8 3.46 2.27 15.5 FC/MC/PC43C 27.4 3.54 2.27 15.7 FC/MC/PC35C 26.8 3.46 2.27 15.5 FC/MC/PC43C 27.4 3.58 2.24 15.5 FC/MC/PC37A 34.0 3.46 2.88 22.2 FC/MC/PC43B 34.6 3.48 2.91 22.4 FC/MC/PC43C 34.0 3.56 2.80 21.6 FC/MC/PC48C 34.2 3.62 2.77 21.8 UC48C 34.4 3.72 2.71 21.6 FC/MC/PC43C 33.8 3.58 2.77 21.6 FC/MC/PC48C 34.0 3.66 2.72 21.8 UC48C 34.4 3.74 2.69 21.6 FC/MC/PC37A 34.4 3.62 2.78 22.0 FC/MC/PC43B 34.2 3.60 2.78 22.0 FC/MC/PC43C 33.4 3.64 2.69 21.2 FC/MC/PC48C 33.8 3.70 2.68 21.6 UC48C 34.2 3.80 2.64 21.4 2.32 2.42 2.42 2.42 2.44 2.50 2.44 2.50 2.40 2.50 2.44 2.48 2.46 2.52 2.44 2.48 2.36 2.40 2.44 2.44 2.44 2.48 2.44 2.48 2.46 2.48 2.44 2.40 2.32 2.42 2.42 2.42 2.44 2.50 2.44 2.50 2.36 2.40 2.44 2.44 2.44 2.48 2.66 2.66 2.74 2.78 2.78 2.76 2.82 2.80 2.76 2.76 2.82 2.86 2.86 2.02 1.90 1.89 1.90 1.86 1.82 1.86 1.82 1.90 1.86 1.87 1.87 1.83 1.79 1.79 1.77 1.96 1.93 1.86 1.89 1.86 1.83 1.86 1.85 1.85 1.84 1.77 1.77 2.02 1.90 1.89 1.90 1.86 1.82 1.86 1.82 1.96 1.93 1.86 1.89 1.86 1.83 2.45 2.47 2.31 2.30 2.28 2.29 2.27 2.26 2.34 2.34 2.20 2.21 2.19 7.85 8.05 7.95 8.15 8.00 8.20 8.10 8.20 7.95 8.20 8.10 8.20 8.15 8.20 7.85 8.00 7.90 8.10 8.00 8.15 8.00 8.20 8.10 8.20 8.10 8.20 7.80 7.70 7.85 8.05 7.95 8.15 8.00 8.20 8.10 8.20 7.90 8.10 8.00 8.15 8.00 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 MBH 47 F COP KW For Notes See Page 21. 18 Johnson Controls Unitary Products 571209-YTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) MODEL YHJD36S41S4 YHJD42S41S4 FURNACE MODEL T*(8,L)X*C20 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*B12 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*D20 T*9(C,V)*D20 T*9X*B12 T*9X*C16 T*9X*C16 T*9X*C16 T*9X*C20 T*9X*C20 T*9X*C20 T*9X*D20 T*9X*D20 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*9C*B12 Y*9C*C16 Y*9C*C16 Y*9C*C16 Y*9C*C20 Y*9C*C20 Y*9C*C20 Y*9C*D20 Y*9C*D20 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*D20 T*9(C,V)*D20 T*9X*C16 T*9X*C16 COIL1 MODEL HEATING2 MBH 17 F COP KW HSPF STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3 FC/MC/PC43C 34.0 3.66 2.72 21.4 FC/MC/PC48C 34.2 3.70 2.71 21.6 UC48C 34.6 3.80 2.67 21.8 FC/MC/PC43B 34.2 3.48 2.88 22.0 FC/MC/PC43C 34.0 3.52 2.83 22.0 FC/MC/PC48C 34.2 3.58 2.80 22.0 UC48C 34.6 3.68 2.75 21.8 FC/MC/PC43C 34.0 3.56 2.80 21.8 FC/MC/PC48C 34.8 3.60 2.83 22.4 UC48C 35.2 3.68 2.80 22.4 FC/MC/PC48D 34.2 3.60 2.78 21.8 UC48D 34.6 3.70 2.74 21.8 FC/MC/PC43B 34.2 3.58 2.80 22.0 FC/MC/PC43C 34.0 3.60 2.77 21.8 FC/MC/PC48C 34.6 3.66 2.77 22.0 UC48C 34.8 3.76 2.71 22.0 FC/MC/PC43C 33.8 3.58 2.77 21.6 FC/MC/PC48C 34.0 3.64 2.74 21.8 UC48C 34.4 3.74 2.69 21.6 FC/MC/PC48D 34.0 3.66 2.72 21.8 UC48D 34.4 3.74 2.69 21.6 FC/MC/PC37A 34.0 3.46 2.88 22.2 FC/MC/PC43B 34.6 3.48 2.91 22.4 FC/MC/PC43C 34.0 3.56 2.80 21.6 FC/MC/PC48C 34.2 3.62 2.77 21.8 UC48C 34.4 3.72 2.71 21.6 FC/MC/PC43C 33.8 3.58 2.77 21.6 FC/MC/PC48C 34.0 3.66 2.72 21.8 UC48C 34.4 3.74 2.69 21.6 FC/MC/PC43B 34.2 3.48 2.88 22.0 FC/MC/PC43C 34.0 3.52 2.83 22.0 FC/MC/PC48C 34.2 3.58 2.80 22.0 UC48C 34.6 3.68 2.75 21.8 FC/MC/PC43C 34.0 3.56 2.80 21.8 FC/MC/PC48C 34.8 3.60 2.83 22.4 UC48C 35.2 3.68 2.80 22.4 FC/MC/PC48D 34.2 3.60 2.78 21.8 UC48D 34.6 3.70 2.74 21.8 FC/PC60C 40.0 3.88 3.02 22.4 UC60C 39.5 3.84 3.01 22.4 FC/PC60C 39.5 3.92 2.95 22.4 UC60C 39.5 3.88 2.98 22.2 FC/PC60C 39.5 3.98 2.91 22.2 UC60C 39.0 3.94 2.90 22.0 FC/PC60C 40.0 4.00 2.93 22.4 UC60C 39.5 3.96 2.92 22.4 FC/PC60C 40.0 3.78 3.10 22.8 UC60C 40.0 3.74 3.13 22.8 FC/PC60C 40.0 3.82 3.07 22.6 UC60C 40.0 3.78 3.10 22.6 FC/MC/PC60D 40.0 3.86 3.04 22.6 UC60D 39.5 3.82 3.03 22.4 FC/PC60C 40.0 3.94 2.97 22.6 UC60C 39.5 3.86 3.00 22.2 2.80 2.84 2.84 2.66 2.70 2.76 2.76 2.74 2.74 2.74 2.78 2.76 2.74 2.76 2.78 2.80 2.76 2.80 2.80 2.82 2.82 2.66 2.66 2.74 2.78 2.78 2.76 2.82 2.80 2.66 2.70 2.76 2.76 2.74 2.74 2.74 2.78 2.76 2.60 2.58 2.64 2.62 2.68 2.68 2.70 2.66 2.54 2.52 2.56 2.54 2.60 2.58 2.64 2.60 2.24 2.23 2.25 2.42 2.39 2.34 2.31 2.33 2.40 2.40 2.30 2.31 2.35 2.31 2.32 2.30 2.29 2.28 2.26 2.27 2.24 2.45 2.47 2.31 2.30 2.28 2.29 2.27 2.26 2.42 2.39 2.34 2.31 2.33 2.40 2.40 2.30 2.31 2.52 2.54 2.49 2.48 2.43 2.41 2.43 2.47 2.63 2.65 2.59 2.61 2.55 2.54 2.51 2.50 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 MBH 47 F COP KW For Notes See Page 21. Johnson Controls Unitary Products 19 571209-YTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) MODEL YHJD42S41S4 YHJD48S41S4 FURNACE MODEL T*9X*C20 T*9X*C20 T*9X*D20 T*9X*D20 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C16 Y*9C*C20 Y*9C*C20 Y*9C*D20 Y*9C*D20 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C20 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*D20 T*9(C,V)*D20 T*9(C,V)*D20 T*9X*C16 T*9X*C16 T*9X*C16 T*9X*C20 T*9X*C20 T*9X*C20 T*9X*D20 T*9X*D20 T*9X*D20 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C16 Y*9C*C16 COIL1 MODEL HEATING2 MBH 17 F COP KW HSPF STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3 FC/PC60C 40.0 3.98 2.94 22.4 UC60C 39.5 3.90 2.97 22.2 FC/MC/PC60D 40.0 4.04 2.90 22.4 UC60D 39.5 4.00 2.89 22.4 FC/PC60C 40.0 3.88 3.02 22.4 UC60C 39.5 3.84 3.01 22.4 FC/PC60C 39.5 3.92 2.95 22.4 UC60C 39.5 3.88 2.98 22.2 FC/PC60C 40.0 3.78 3.10 22.8 UC60C 40.0 3.74 3.13 22.8 FC/PC60C 40.0 3.82 3.07 22.6 UC60C 40.0 3.78 3.10 22.6 FC/MC/PC60D 40.0 3.86 3.04 22.6 UC60D 39.5 3.82 3.03 22.4 FC/MC62D 45.5 3.64 3.66 27.0 FC/PC60C 46.0 3.64 3.70 27.2 UC60C 45.5 3.62 3.68 27.0 FC/MC62D 45.5 3.66 3.64 26.8 FC/PC60C 46.0 3.64 3.70 27.2 UC60C 45.5 3.68 3.62 26.8 FC/MC62D 45.5 3.66 3.64 26.8 FC/PC60C 45.5 3.70 3.60 27.0 UC60C 45.5 3.68 3.62 26.8 FC/MC62D 45.0 3.70 3.56 26.8 FC/PC60C 45.5 3.72 3.58 26.8 UC60C 44.5 3.82 3.41 26.2 FC/MC62D 45.5 3.60 3.70 27.0 FC/PC60C 46.0 3.62 3.72 27.4 UC60C 45.5 3.58 3.72 27.2 FC/MC62D 45.5 3.56 3.74 27.2 FC/PC60C 46.0 3.62 3.72 27.4 UC60C 45.5 3.58 3.72 27.2 FC/MC/PC60D 46.0 3.64 3.70 27.2 FC/MC62D 45.5 3.60 3.70 27.2 UC60D 45.5 3.60 3.70 27.0 FC/MC62D 45.5 3.66 3.64 26.8 FC/PC60C 45.5 3.70 3.60 27.0 UC60C 45.5 3.66 3.64 26.8 FC/MC62D 45.0 3.68 3.58 26.8 FC/PC60C 45.5 3.74 3.56 26.8 UC60C 45.0 3.70 3.56 26.8 FC/MC/PC60D 44.5 3.80 3.43 26.2 FC/MC62D 45.5 3.64 3.66 27.0 UC60D 44.5 3.76 3.47 26.0 FC/MC62D 45.5 3.64 3.66 27.0 FC/PC60C 46.0 3.64 3.70 27.2 UC60C 45.5 3.62 3.68 27.0 FC/MC62D 45.5 3.66 3.64 26.8 FC/PC60C 46.0 3.64 3.70 27.2 UC60C 45.5 3.68 3.62 26.8 FC/MC62D 45.5 3.60 3.70 27.0 FC/PC60C 46.0 3.62 3.72 27.4 UC60C 45.5 3.58 3.72 27.2 2.68 2.64 2.72 2.70 2.60 2.58 2.64 2.62 2.54 2.52 2.56 2.54 2.60 2.58 2.84 2.80 2.80 2.84 2.82 2.84 2.86 2.86 2.84 2.88 2.88 2.96 2.80 2.80 2.78 2.78 2.80 2.78 2.80 2.80 2.78 2.84 2.86 2.84 2.86 2.88 2.86 2.96 2.84 2.94 2.84 2.80 2.80 2.84 2.82 2.84 2.80 2.80 2.78 2.45 2.46 2.41 2.43 2.52 2.54 2.49 2.48 2.63 2.65 2.59 2.61 2.55 2.54 2.79 2.85 2.83 2.76 2.83 2.76 2.75 2.77 2.76 2.73 2.73 2.59 2.83 2.87 2.87 2.87 2.87 2.87 2.85 2.85 2.85 2.76 2.77 2.76 2.75 2.73 2.75 2.59 2.79 2.59 2.79 2.85 2.83 2.76 2.83 2.76 2.83 2.87 2.87 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 8.20 MBH 47 F COP KW For Notes See Page 21. 20 Johnson Controls Unitary Products 571209-YTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) MODEL YHJD48S41S4 YHJD60S41S5 FURNACE MODEL Y*9C*C20 Y*9C*C20 Y*9C*C20 Y*9C*D20 Y*9C*D20 Y*9C*D20 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*D20 T*9(C,V)*D20 T*9X*C20 T*9X*C20 T*9X*D20 T*9X*D20 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*9C*C20 Y*9C*C20 Y*9C*D20 Y*9C*D20 COIL1 MODEL HEATING2 MBH 17 F COP KW HSPF STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3 FC/MC62D 45.5 3.56 3.74 27.2 FC/PC60C 46.0 3.62 3.72 27.4 UC60C 45.5 3.58 3.72 27.2 FC/MC/PC60D 46.0 3.64 3.70 27.2 FC/MC62D 45.5 3.60 3.70 27.2 UC60D 45.5 3.60 3.70 27.0 FC/MC62D 58.0 3.38 5.03 39.0 FC64D 58.0 3.36 5.06 41.0 FC/MC62D 58.0 3.44 4.94 38.5 FC64D 58.0 3.36 5.06 39.5 FC/MC62D 58.0 3.36 5.06 39.0 FC64D 58.0 3.30 5.15 40.0 FC/MC62D 58.0 3.38 5.03 39.0 FC64D 58.0 3.30 5.15 40.0 FC/MC62D 58.0 3.44 4.94 38.5 FC64D 58.0 3.32 5.12 39.5 FC/MC62D 58.0 3.42 4.97 38.5 FC64D 58.0 3.36 5.06 40.0 FC/MC62D 58.0 3.38 5.03 39.0 FC64D 58.0 3.36 5.06 41.0 FC/MC62D 58.0 3.36 5.06 39.0 FC64D 58.0 3.30 5.15 40.5 FC/MC62D 58.0 3.38 5.03 39.0 FC64D 58.0 3.30 5.15 40.0 2.78 2.80 2.78 2.80 2.80 2.78 2.66 2.78 2.70 2.82 2.64 2.76 2.66 2.76 2.70 2.78 2.68 2.80 2.66 2.78 2.64 2.74 2.66 2.76 2.87 2.87 2.87 2.85 2.85 2.85 4.30 4.32 4.18 4.10 4.33 4.25 4.30 4.25 4.18 4.16 4.21 4.19 4.30 4.32 4.33 4.33 4.30 4.25 8.20 8.20 8.20 8.20 8.20 8.20 8.15 8.05 8.20 8.10 8.10 8.15 8.15 8.15 8.20 8.20 8.15 8.20 8.15 8.05 8.10 8.10 8.15 8.15 MBH 47 F COP KW 1. Rated CFM same as for cooling. 2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. 3. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. — = Not Applicable. Johnson Controls Unitary Products 21 571209-YTG-C-1012 ACCESSORIES Compressor Blanket - Designed to further reduce the normal operating sound. Refer to Price Manual for specific model numbers. Start Assist Kit (S1-2SA067*) - May be required on 24, 30, 36, & 42 models when a TXV is installed. May also be required on 18 & 60 models in low voltage application. The 48 model has factory installed start assist. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model. TXV Kits - S1-1TVM series thermal expansion valves precisely meter refrigerant for optimum performance over a wide range of conditions. See System Charge table for TXV part number for each model. Blower Time Delay - Available to increase efficiency when installed. Installs on indoor section and maintains blower for approximately one minute after cooling thermostat has been satisfied. Thermostats - Compatible thermostat controls are available through accessory sourcing. For optimum performance and installation, refer to the UPGNET “Low Voltage Wiring Diagram” document to select and apply controls. Outdoor Thermostat (S1-2TD06700124) - Provides additional staging of supplemental electric heat. Low Temperature Cutout (S1-2LT06700224) - Prevents heat pump operation below -1°F ambient temperature. SOUND POWER LEVEL - TYPICAL OCTAVE BAND SPECTRUM (without tone adjustment) Size 18 24 30 36 42 48 60 Test Condition 63 125 250 500 1000 2000 4000 8000 dBA SQI Cooling Mode 67 71 66 69 65 59 58 55 70 19.2 Heating Mode 68 70 66 68 67 61 60 57 71 19.2 Cooling Mode 68 70 67 69 72 65 66 62 75 19.0 Heating Mode 69 69 63 67 67 64 65 62 72 19.1 Cooling Mode 73 70 69 71 72 66 69 63 76 19.2 Heating Mode 71 73 69 71 73 68 65 62 76 19.1 Cooling Mode 72 73 71 72 73 67 66 63 76 19.0 Heating Mode 70 72 69 70 71 69 65 64 75 19.2 Cooling Mode 71 71 73 73 72 67 67 64 77 19.1 Heating Mode 71 71 71 72 72 69 69 65 77 19.1 Cooling Mode 72 71 68 69 66 62 57 53 71 19.1 Heating Mode 71 73 70 72 70 68 65 63 75 19.1 Cooling Mode 69 69 69 70 70 65 64 63 74 19.2 Heating Mode 68 69 68 69 71 65 63 62 74 19.0 Rated in accordance with ARI Standard 270. 22 Johnson Controls Unitary Products 571209-YTG-C-1012 TYPICAL INSTALLATION MINIMUM 18” SERVICE ACCESS CLEARANCE ON ONE SIDE 60” OVERHEAD CLEARANCE THERMOSTAT WEATHERPROOF DISCONNECT SWITCH NEC CLASS 1 WIRING NEC CLASS 2 WIRING 10” CLEARANCE AROUND PERIMETER TO FURNACE OR AIR HANDLER TERMINAL BLOCK TO INDOOR COIL NOTES: ALL OUTDOOR WIRING MUST BE WEATHERPROOF. MINIMUM 24” UNIT TO UNIT CLEARANCE. CONTROL ACCESS PANEL SEAL OPENING(S) WITH PERMAGUM OR EQUIVALENT TYPICAL FIELD WIRING ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES OUTDOOR UNIT INDOOR UNIT THERMOSTAT LOW VOLTAGE TERMINAL BLOCK 3,4 IN AIR HANDLER WITH ELECTRIC HEAT DEFROST CONTROL R R RED B or C C BLK R Y Y YEL O O ORG W W2 WHT W PUR X/L L or X G 2 T E 2 1 FIELD INSTALLED JUMPER 1 JUMPER TERMINALS E AND W TO HEAT ON FIRST STAGE DURING EMERGENCY HEAT. 2 TERMINAL NOT USED ON ALL THERMOSTATS. POWER WIRING 24V CONTROL WIRING (NEC CLASS 2) G CONTACTOR C Y T2 T1 M O L2 L1 GND. SCREW BRN W1/66 W1 BK DEHUMIDIFICATION CONTROL CONNECTION (Humidistat* Jumper must be removed) GND. LUG CIRCUIT BREAKER*** POWER WIRING 208/230-1-60 230-1-50 3 CHECK THE LOW VOLTAGE TERMINAL BLOCK ON THE INDOOR UNIT FOR THE ACTUAL ARRANGEMENT OF THE TERMINALS. 4 CONNECT POWER WIRING TO TERMINAL BLOCK 3TB ON UNITS WITHOUT ELECTRIC HEAT OR CIRCUIT BREAKER. Johnson Controls Unitary Products 23 571209-YTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. YHJD18S41S2 INDOOR COIL MODEL NO. FC35 CONDENSING ENTERING AIR TEMPERATURE 65 75 85 95 105 115 125 IDCFM 450 600 750 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 80 72 T.C. 16.8 18.5 18.8 20.3 21.7 18.9 19.4 19.9 21.3 22.3 21.0 20.3 20.9 22.2 22.9 S.C. 16.8 15.4 13.3 13.2 11.1 18.9 18.2 15.6 15.1 12.0 21.0 20.3 17.8 17.0 12.9 KW 1.00 1.00 1.00 1.00 1.00 1.10 1.10 1.10 1.10 1.10 1.20 1.20 1.20 1.20 1.20 T.C. 16.0 17.6 17.6 19.4 20.9 18.0 18.5 18.7 20.3 21.6 20.0 19.5 19.7 21.2 22.2 S.C. 16.0 14.9 12.8 12.8 10.6 18.0 17.6 15.0 14.7 11.6 20.0 19.5 17.3 16.7 12.6 1.30 KW 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.30 1.30 1.30 1.30 T.C. 15.2 16.6 16.5 18.5 20.1 17.1 17.7 17.5 19.4 20.8 19.0 18.8 18.5 20.2 21.5 S.C. 15.2 14.4 12.2 12.4 10.2 17.1 17.0 14.5 14.4 11.2 19.0 18.8 16.7 16.4 12.3 KW 1.30 1.30 1.30 1.30 1.30 1.40 1.40 1.40 1.40 1.40 1.50 1.50 1.50 1.50 1.50 T.C. 14.4 15.6 15.3 17.7 19.3 16.2 16.8 16.3 18.5 20.1 18.0 18.0 17.3 19.2 20.8 S.C. 14.4 13.9 11.7 11.9 9.7 16.2 16.3 13.9 14.0 10.8 18.0 18.0 16.2 16.1 11.9 KW 1.40 1.40 1.40 1.40 1.50 1.50 1.50 1.50 1.50 1.50 1.60 1.60 1.60 1.60 1.60 19.4 T.C. 13.5 14.2 14.1 16.2 18.0 15.2 15.6 15.0 17.0 18.7 16.9 16.9 15.8 17.8 S.C. 13.5 13.3 11.1 11.3 9.1 15.2 15.4 13.3 13.4 10.3 16.9 16.9 15.5 15.5 11.5 KW 1.60 1.60 1.60 1.60 1.60 1.70 1.70 1.70 1.70 1.70 1.80 1.80 1.70 1.80 1.80 18.0 T.C. 12.5 12.8 12.8 14.8 16.7 14.2 14.3 13.6 15.6 17.4 15.9 15.9 14.4 16.3 S.C. 12.5 12.6 10.5 10.7 8.6 14.2 14.3 12.7 12.8 9.8 15.9 15.9 14.4 14.9 11.0 KW 1.70 1.70 1.70 1.80 1.80 1.80 1.80 1.80 1.80 1.90 1.90 1.90 1.90 1.90 2.00 T.C. 11.5 11.4 11.6 13.4 15.5 13.2 13.1 12.2 14.1 16.0 14.8 14.8 12.9 14.9 16.6 S.C. 11.5 11.4 9.9 10.0 8.0 13.2 13.1 12.1 12.2 9.3 14.8 14.8 12.9 14.4 10.6 KW 1.90 1.90 1.90 1.90 2.00 2.00 2.00 2.00 2.00 2.00 2.10 2.10 2.10 2.10 2.10 NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handlers Coils T.C. S.C. KW – FC/MC/PC18 0.97 0.96 1.02 – FC/MC/PC24 0.99 0.98 1.02 – FC/MC/PC30 0.99 0.98 1.02 – UC24 0.99 0.99 1.02 – UC30 0.99 0.99 1.02 AHE18B – 0.99 1.00 0.93 AHR18B – 0.98 1.01 1.01 AHV18B – 0.99 1.00 0.93 AV*24 – 1.01 1.01 0.92 MV12B FC/MC/PC18B 0.99 0.99 0.92 MV12B FC/MC24B 1.01 1.01 0.94 MV12B FC/MC30B 1.01 1.01 0.94 MX12B FC/MC/PC18B 0.99 0.99 0.91 MX12B FC/MC24B 1.03 1.06 0.91 MX12B FC/MC30B 1.03 1.06 0.91 Continued on next page. 24 Johnson Controls Unitary Products 571209-YTG-C-1012 Furnaces Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW T*(8,L)V*A12 FC/MC/PC18A 0.99 0.98 0.93 T*9(C,V)*B12 UC18B 1.00 0.99 0.92 T*(8,L)V*A12 FC/MC/PC24A 1.02 1.06 0.93 T*9(C,V)*B12 UC24B 1.02 1.01 0.92 T*(8,L)V*A12 FC/MC/PC30A 1.02 1.06 0.93 T*9(C,V)*B12 UC30B 1.02 1.01 0.92 T*(8,L)V*A12 UC18A 0.99 0.99 0.93 T*9X*A10 FC/MC/PC18A 0.99 0.98 0.94 T*(8,L)V*A12 UC24A 1.02 1.05 0.93 T*9X*A10 FC/MC/PC24A 1.01 1.01 0.94 T*(8,L)V*A12 UC30A 1.02 1.05 0.93 T*9X*A10 FC/MC/PC30A 1.01 1.01 0.94 T*(8,L)V*B12 FC/MC/PC18B 0.99 0.98 0.92 T*9X*B12 FC/MC/PC18B 0.99 0.99 0.91 T*(8,L)V*B12 FC/MC/PC24B 1.01 1.01 0.93 T*9X*B12 FC/MC/PC24B 1.02 1.01 0.91 T*(8,L)V*B12 FC/MC/PC30B 1.01 1.01 0.93 T*9X*B12 FC/MC/PC30B 1.02 1.01 0.91 T*(8,L)V*B12 UC18B 1.00 0.99 0.92 T*9X*B12 UC18B 1.00 0.99 0.91 T*(8,L)V*B12 UC24B 1.02 1.01 0.91 T*9X*B12 UC24B 1.02 1.01 0.91 T*(8,L)V*B12 UC30B 1.02 1.01 0.91 T*9X*B12 UC30B 1.02 1.01 0.91 T*(8,L)X*A12 FC/MC/PC18A 0.98 0.95 0.91 Y*(8,L)C*A12 FC/MC/PC18A 0.99 0.98 0.93 T*(8,L)X*A12 FC/MC/PC24A 1.02 1.01 0.90 Y*(8,L)C*A12 FC/MC/PC24A 1.02 1.06 0.93 T*(8,L)X*A12 FC/MC/PC30A 1.02 1.01 0.90 Y*(8,L)C*A12 FC/MC/PC30A 1.02 1.06 0.93 T*(8,L)X*A12 UC18A 1.00 0.99 0.91 Y*(8,L)C*A12 UC18A 0.99 0.99 0.93 T*(8,L)X*A12 UC24A 1.01 1.01 0.91 Y*(8,L)C*A12 UC24A 1.02 1.05 0.93 T*(8,L)X*A12 UC30A 1.01 1.01 0.91 Y*(8,L)C*A12 UC30A 1.02 1.05 0.93 T*(8,L)X*B12 FC/MC/PC18B 0.99 0.99 0.91 Y*(8,L)C*B12 FC/MC/PC18B 0.99 0.98 0.92 T*(8,L)X*B12 FC/MC/PC24B 1.02 1.01 0.90 Y*(8,L)C*B12 FC/MC/PC24B 1.01 1.01 0.93 T*(8,L)X*B12 FC/MC/PC30B 1.02 1.01 0.90 Y*(8,L)C*B12 FC/MC/PC30B 1.01 1.01 0.93 T*(8,L)X*B12 UC18B 1.00 0.99 0.91 Y*(8,L)C*B12 UC18B 1.00 0.99 0.92 T*(8,L)X*B12 UC24B 1.02 1.01 0.91 Y*(8,L)C*B12 UC24B 1.02 1.01 0.91 T*(8,L)X*B12 UC30B 1.02 1.01 0.91 Y*(8,L)C*B12 UC30B 1.02 1.01 0.91 T*9V*A10 FC/MC/PC18A 0.98 0.97 0.94 Y*9C*B12 FC/MC/PC18B 0.99 0.98 0.92 T*9V*A10 FC/MC/PC24A 1.01 1.00 0.94 Y*9C*B12 FC/MC/PC24B 1.01 1.01 0.92 T*9V*A10 FC/MC/PC30A 1.01 1.00 0.94 Y*9C*B12 FC/MC/PC30B 1.01 1.01 0.92 T*9(C,V)*B12 FC/MC/PC18B 0.99 0.98 0.92 Y*9C*B12 UC18B 1.00 0.99 0.92 T*9(C,V)*B12 FC/MC/PC24B 1.01 1.01 0.92 Y*9C*B12 UC24B 1.02 1.01 0.92 T*9(C,V)*B12 FC/MC/PC30B 1.01 1.01 0.92 Y*9C*B12 UC30B 1.02 1.01 0.92 Johnson Controls Unitary Products 25 571209-YTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. YHJD24S41S4 INDOOR COIL MODEL NO. AHP30 CONDENSING ENTERING AIR TEMPERATURE 65 75 85 95 105 115 125 IDCFM 600 800 1000 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 80 72 T.C. 22.6 25.9 25.9 28.3 29.4 25.2 27.1 26.8 29.2 30.4 27.9 28.3 27.6 30.0 31.4 S.C. 22.6 20.9 18.1 18.1 15.5 25.2 23.9 19.7 19.5 16.1 27.9 26.9 21.3 20.9 16.6 KW 1.60 1.60 1.60 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.80 1.80 1.80 1.80 1.80 T.C. 21.5 24.1 24.2 26.6 28.1 23.9 25.3 25.1 27.5 29.0 26.3 26.4 26.0 28.5 29.9 S.C. 21.5 20.1 17.3 17.3 14.7 23.9 22.8 19.1 18.9 15.4 26.3 25.6 20.9 20.6 16.1 2.00 KW 1.70 1.80 1.80 1.80 1.80 1.80 1.90 1.80 1.90 1.90 1.90 1.90 1.90 2.00 T.C. 20.4 22.3 22.4 24.8 26.8 22.6 23.4 23.4 25.9 27.6 24.7 24.5 24.4 26.9 28.4 S.C. 20.4 19.4 16.5 16.4 13.8 22.6 21.8 18.6 18.4 14.7 24.7 24.3 20.6 20.3 15.6 2.10 KW 1.90 1.90 1.90 1.90 1.90 2.00 2.00 2.00 2.00 2.00 2.10 2.10 2.10 2.10 T.C. 19.4 20.6 20.6 23.0 25.5 21.2 21.6 21.7 24.2 26.2 23.1 22.6 22.7 25.4 26.9 S.C. 19.4 18.6 15.7 15.6 13.0 21.2 20.8 18.0 17.8 14.0 23.1 22.6 20.2 20.0 15.1 2.30 KW 2.00 2.00 2.00 2.00 2.10 2.10 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.30 T.C. 17.6 18.0 18.0 20.9 23.5 19.4 19.5 18.9 21.9 24.3 21.3 21.0 19.9 23.0 25.1 S.C. 17.6 17.2 14.5 14.7 12.0 19.4 19.3 16.7 16.9 13.2 21.3 21.0 18.8 19.1 14.4 2.40 KW 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.30 2.30 2.40 T.C. 15.8 15.5 15.4 18.8 21.5 17.6 17.5 16.2 19.7 22.4 19.5 19.5 17.0 20.6 23.3 S.C. 15.8 15.5 13.3 13.9 11.1 17.6 17.5 15.3 16.0 12.4 19.5 19.5 17.0 18.2 13.7 2.60 KW 2.20 2.20 2.20 2.30 2.40 2.30 2.30 2.30 2.40 2.50 2.50 2.50 2.40 2.50 T.C. 13.9 13.0 12.7 16.6 19.5 15.8 15.5 13.4 17.4 20.5 17.7 17.9 14.1 18.2 21.5 S.C. 13.9 13.0 12.1 13.0 10.1 15.8 15.5 13.4 15.2 11.5 17.7 17.9 14.1 17.3 13.0 KW 2.30 2.20 2.20 2.40 2.50 2.40 2.40 2.40 2.50 2.60 2.60 2.60 2.50 2.60 2.70 NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handlers Coils T.C. S.C. KW – FC/MC/PC32 1.02 1.00 1.02 – FC/MC/PC35 1.02 1.00 1.02 – FC/MC/PC37 1.03 1.02 1.02 – FC/MC/PC43 1.03 1.02 1.02 AHE24B – 1.03 1.02 0.94 AHE30B – 1.03 1.02 0.94 AHR24B – 1.02 0.98 0.98 AHV24B – 1.02 0.97 0.93 AHV30B – 1.02 1.01 0.94 AHV36C – 1.03 1.02 0.93 AV*36 – 1.02 1.00 0.92 MV12B FC/MC35B 1.05 1.03 0.94 MV12B FC/MC43B 1.06 1.04 0.94 MX12B FC/MC35B 1.06 1.03 0.92 MX12B FC/MC43B 1.02 1.01 0.92 Continued on next page. 26 Johnson Controls Unitary Products 571209-YTG-C-1012 Furnaces Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW T*(8,L)V*A12 FC/MC/PC32A 1.02 0.99 0.94 T*9(C,V)*C20 FC/MC/PC43C 1.07 1.11 0.96 T*(8,L)V*A12 FC/MC/PC37A 1.06 1.04 0.94 T*9X*A10 FC/MC/PC32A 1.02 0.99 0.96 T*(8,L)V*B12 FC/MC/PC35B 1.05 1.02 0.94 T*9X*A10 FC/MC/PC37A 1.02 0.99 0.96 T*(8,L)V*B12 FC/MC/PC43B 1.06 1.04 0.94 T*9X*B12 FC/MC/PC35B 1.05 1.03 0.92 T*(8,L)V*C16 FC/MC/PC35C 1.05 1.03 0.93 T*9X*B12 FC/MC/PC43B 1.07 1.05 0.93 T*(8,L)V*C16 FC/MC/PC43C 1.07 1.04 0.93 T*9X*C16 FC/MC/PC35C 1.05 1.03 0.92 T*(8,L)V*C20 FC/MC/PC35C 1.02 1.00 0.93 T*9X*C16 FC/MC/PC43C 1.07 1.05 0.92 T*(8,L)V*C20 FC/MC/PC43C 1.02 1.01 0.92 T*9X*C20 FC/MC/PC35C 1.05 1.03 0.93 T*(8,L)X*A12 FC/MC/PC32A 1.05 1.03 0.92 T*9X*C20 FC/MC/PC43C 1.07 1.04 0.94 T*(8,L)X*A12 FC/MC/PC37A 1.07 1.09 0.92 Y*(8,L)C*A12 FC/MC/PC32A 1.02 0.99 0.94 T*(8,L)X*B12 FC/MC/PC35B 1.05 1.06 0.92 Y*(8,L)C*A12 FC/MC/PC37A 1.06 1.04 0.94 T*(8,L)X*B12 FC/MC/PC43B 1.07 1.10 0.93 Y*(8,L)C*B12 FC/MC/PC35B 1.05 1.02 0.94 T*(8,L)X*C16 FC/MC/PC35C 1.05 1.07 0.92 Y*(8,L)C*B12 FC/MC/PC43B 1.06 1.04 0.94 T*(8,L)X*C16 FC/MC/PC43C 1.08 1.10 0.93 Y*(8,L)C*C16 FC/MC/PC35C 1.05 1.03 0.93 T*(8,L)X*C20 FC/MC/PC35C 1.07 1.09 0.95 Y*(8,L)C*C16 FC/MC/PC43C 1.07 1.04 0.93 T*(8,L)X*C20 FC/MC/PC43C 1.07 1.04 0.93 Y*(8,L)C*C20 FC/MC/PC35C 1.02 1.00 0.93 T*9V*A10 FC/MC/PC32A 1.03 1.01 0.98 Y*(8,L)C*C20 FC/MC/PC43C 1.02 1.01 0.92 T*9V*A10 FC/MC/PC37A 1.05 1.03 0.99 Y*9C*B12 FC/MC/PC35B 1.04 1.02 0.95 T*9(C,V)*B12 FC/MC/PC35B 1.04 1.02 0.95 Y*9C*B12 FC/MC/PC43B 1.06 1.04 0.95 T*9(C,V)*B12 FC/MC/PC43B 1.06 1.04 0.95 Y*9C*C16 FC/MC/PC35C 1.05 1.08 0.95 T*9(C,V)*C16 FC/MC/PC35C 1.05 1.08 0.95 Y*9C*C16 FC/MC/PC43C 1.06 1.04 0.94 T*9(C,V)*C16 FC/MC/PC43C 1.06 1.04 0.94 Y*9C*C20 FC/MC/PC35C 1.02 1.00 0.93 T*9(C,V)*C20 FC/MC/PC35C 1.02 1.00 0.93 Y*9C*C20 FC/MC/PC43C 1.07 1.11 0.96 Johnson Controls Unitary Products 27 571209-YTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. YHJD30S41S4 INDOOR COIL MODEL NO. AHP30 CONDENSING ENTERING AIR TEMPERATURE 65 75 85 95 105 115 125 IDCFM 800 1000 1200 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 80 72 T.C. 29.1 31.3 31.4 34.3 36.1 31.0 32.7 32.8 35.2 36.6 33.0 34.1 34.1 36.1 37.2 S.C. 28.0 24.7 21.2 21.0 17.8 29.9 27.9 23.3 22.4 18.2 31.8 31.1 25.4 23.8 18.6 KW 2.00 2.00 2.00 2.10 2.00 2.10 2.10 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.20 T.C. 27.4 29.1 29.2 32.3 34.3 29.3 30.4 30.4 33.2 34.9 31.3 31.6 31.6 34.0 35.5 S.C. 26.4 23.7 20.2 20.1 16.8 28.3 26.5 22.3 21.7 17.4 30.2 29.3 24.4 23.3 18.0 2.30 KW 2.10 2.20 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.30 2.30 2.40 2.30 2.30 T.C. 25.7 26.9 27.0 30.3 32.5 27.6 28.0 28.0 31.1 33.2 29.6 29.1 29.1 31.9 33.9 S.C. 24.8 22.7 19.2 19.3 15.8 26.6 25.1 21.3 21.0 16.6 28.5 27.5 23.3 22.7 17.3 2.50 KW 2.20 2.30 2.30 2.30 2.40 2.40 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 T.C. 24.0 24.7 24.7 28.2 30.8 25.9 25.7 25.7 29.1 31.5 27.8 26.7 26.6 29.9 32.2 S.C. 23.1 21.8 18.2 18.4 14.8 25.0 23.7 20.2 20.3 15.8 26.8 25.7 22.3 22.1 16.7 2.70 KW 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 2.60 2.60 2.60 2.60 2.60 2.70 T.C. 21.8 22.2 21.8 25.3 28.3 23.6 23.5 22.6 26.1 29.0 25.4 24.8 23.4 26.9 29.7 S.C. 21.0 20.4 17.0 17.3 13.8 22.8 22.2 18.9 19.2 14.8 24.5 24.0 20.9 21.1 15.8 2.90 KW 2.50 2.50 2.50 2.60 2.70 2.70 2.70 2.60 2.70 2.80 2.80 2.80 2.70 2.80 T.C. 19.7 19.6 19.0 22.3 25.8 21.4 21.3 19.6 23.2 26.5 23.0 23.0 20.2 24.0 27.1 S.C. 19.0 18.9 15.8 16.1 12.7 20.6 20.6 17.6 18.0 13.8 22.2 22.2 19.5 20.0 14.9 3.10 KW 2.70 2.70 2.70 2.70 2.80 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 3.00 T.C. 17.5 17.1 16.1 19.4 23.4 19.1 19.1 16.5 20.3 24.0 20.7 21.2 16.9 21.1 24.6 S.C. 16.9 17.1 14.6 14.9 11.7 18.4 19.0 16.3 16.9 12.8 19.9 20.4 16.9 18.9 13.9 KW 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 3.00 3.10 3.10 3.10 3.00 3.10 3.30 NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handlers Coils T.C. S.C. KW – FC/MC/PC32 1.00 1.05 1.00 – FC/MC/PC35 1.00 1.05 1.00 – FC/MC/PC37 1.02 1.07 1.00 – FC/MC/PC43 1.02 1.07 1.00 AHE30B – 1.02 1.06 0.94 AHE36C – 1.04 1.11 0.92 AHR30B – 1.02 1.11 1.01 AHR36B – 1.03 1.10 1.01 AHV30B – 1.02 1.07 0.96 AHV36C – 1.02 1.05 0.91 AV*36 – 1.04 1.09 0.91 MV12B FC/MC35B 1.02 1.07 0.92 MV12B FC/MC43B 1.04 1.09 0.93 MV16C FC/MC35C 1.04 1.12 0.92 MV16C FC/MC43C 1.04 1.09 0.93 MX12B FC/MC35B 1.03 1.12 0.93 MX12B FC/MC43B 1.05 1.15 0.94 MX16C FC/MC35C 1.03 1.08 0.90 MX16C FC/MC43C 1.05 1.10 0.91 Continued on next page. 28 Johnson Controls Unitary Products 571209-YTG-C-1012 Furnaces Coils T.C. S.C KW Furnaces Coils T.C. S.C KW T*(8,L)V*A12 FC/MC/PC32A 1.01 1.05 0.99 T*9(C,V)*C20 FC/MC/PC43C 1.04 1.09 0.93 T*(8,L)V*A12 FC/MC/PC37A 1.02 1.06 0.95 T*9X*B12 FC/MC/PC35B 1.03 1.12 0.94 T*(8,L)V*B12 FC/MC/PC35B 1.02 1.06 0.95 T*9X*B12 FC/MC/PC43B 1.05 1.15 0.94 T*(8,L)V*B12 FC/MC/PC43B 1.04 1.09 0.96 T*9X*C16 FC/MC/PC35C 1.04 1.12 0.93 T*(8,L)V*C16 FC/MC/PC35C 1.02 1.07 0.93 T*9X*C16 FC/MC/PC43C 1.05 1.13 0.93 T*(8,L)V*C16 FC/MC/PC43C 1.04 1.09 0.93 T*9X*C20 FC/MC/PC35C 1.00 1.00 0.89 T*(8,L)V*C20 FC/MC/PC35C 1.02 1.07 0.94 T*9X*C20 FC/MC/PC43C 0.97 0.95 0.89 T*(8,L)V*C20 FC/MC/PC43C 1.04 1.10 0.91 Y*(8,L)C*A12 FC/MC/PC32A 1.01 1.05 0.99 T*(8,L)X*A12 FC/MC/PC32A 1.02 1.06 0.95 Y*(8,L)C*A12 FC/MC/PC37A 1.02 1.06 0.95 T*(8,L)X*A12 FC/MC/PC37A 1.06 1.16 0.94 Y*(8,L)C*B12 FC/MC/PC35B 1.02 1.06 0.95 T*(8,L)X*B12 FC/MC/PC35B 1.04 1.14 0.94 Y*(8,L)C*B12 FC/MC/PC43B 1.04 1.09 0.96 T*(8,L)X*B12 FC/MC/PC43B 1.06 1.17 0.94 Y*(8,L)C*C16 FC/MC/PC35C 1.02 1.07 0.93 T*(8,L)X*C16 FC/MC/PC35C 1.04 1.14 0.93 Y*(8,L)C*C16 FC/MC/PC43C 1.04 1.09 0.93 T*(8,L)X*C16 FC/MC/PC43C 1.04 1.10 0.91 Y*(8,L)C*C20 FC/MC/PC35C 1.02 1.07 0.94 T*(8,L)X*C20 FC/MC/PC35C 1.00 1.00 0.89 Y*(8,L)C*C20 FC/MC/PC43C 1.04 1.10 0.91 T*(8,L)X*C20 FC/MC/PC43C 1.02 1.03 0.90 Y*9C*B12 FC/MC/PC35B 1.01 1.06 0.97 T*9(C,V)*B12 FC/MC/PC35B 1.01 1.06 0.97 Y*9C*B12 FC/MC/PC43B 1.03 1.08 0.96 T*9(C,V)*B12 FC/MC/PC43B 1.03 1.08 0.96 Y*9C*C16 FC/MC/PC35C 1.02 1.07 0.94 T*9(C,V)*C16 FC/MC/PC35C 1.02 1.07 0.94 Y*9C*C16 FC/MC/PC43C 1.04 1.09 0.95 T*9(C,V)*C16 FC/MC/PC43C 1.04 1.09 0.95 Y*9C*C20 FC/MC/PC35C 1.02 1.07 0.93 T*9(C,V)*C20 FC/MC/PC35C 1.02 1.07 0.93 Y*9C*C20 FC/MC/PC43C 1.04 1.09 0.93 Johnson Controls Unitary Products 29 571209-YTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. YHJD36S41S4 INDOOR COIL MODEL NO. AHP36 CONDENSING ENTERING AIR TEMPERATURE 65 75 85 95 105 115 125 IDCFM 1000 1200 1400 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 80 72 T.C. 35.0 39.8 39.9 42.7 45.2 37.7 40.6 41.0 43.5 45.7 40.5 41.5 42.0 44.4 46.1 S.C. 34.9 32.4 27.9 27.1 22.7 37.7 35.4 29.9 28.6 23.2 40.4 38.5 31.8 30.2 23.8 KW 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.60 2.60 2.60 2.60 2.60 T.C. 33.3 36.8 36.9 39.9 42.9 35.7 37.6 37.9 40.8 43.4 38.1 38.5 38.9 41.8 43.9 S.C. 33.2 31.1 26.5 25.9 21.5 35.7 33.7 28.5 27.6 22.2 38.1 36.4 30.5 29.4 22.9 2.80 KW 2.60 2.60 2.60 2.70 2.70 2.70 2.70 2.70 2.70 2.80 2.80 2.80 2.80 2.80 T.C. 31.6 33.8 33.9 37.1 40.6 33.7 34.6 34.8 38.2 41.2 35.8 35.5 35.7 39.2 41.8 S.C. 31.5 29.7 25.1 24.8 20.2 33.6 32.1 27.2 26.7 21.1 35.7 34.4 29.2 28.5 22.0 3.10 KW 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 2.90 3.00 3.00 3.00 3.00 3.00 T.C. 29.9 30.8 30.8 34.3 38.4 31.7 31.6 31.7 35.5 39.0 33.5 32.5 32.6 36.6 39.6 S.C. 29.8 28.4 23.7 23.6 19.0 31.6 30.4 25.8 25.7 20.1 33.4 32.4 27.9 27.7 21.1 3.30 KW 2.90 2.90 3.00 3.10 3.10 3.00 3.10 3.10 3.10 3.20 3.20 3.20 3.20 3.20 T.C. 26.3 26.7 27.4 31.4 35.3 28.6 28.5 28.1 32.4 35.9 30.9 30.4 28.8 33.3 36.5 S.C. 26.3 25.5 22.3 22.4 17.8 28.6 27.9 24.3 24.5 18.9 30.9 30.4 26.3 26.5 20.0 3.50 KW 3.10 3.10 3.10 3.20 3.30 3.20 3.20 3.20 3.30 3.40 3.30 3.30 3.30 3.40 T.C. 22.8 22.6 24.1 28.5 32.2 25.6 25.5 24.5 29.2 32.8 28.4 28.4 25.0 30.0 33.5 S.C. 22.8 22.5 20.8 21.3 16.6 25.5 25.4 22.8 23.3 17.8 28.3 28.3 24.8 25.3 18.9 3.60 KW 3.20 3.20 3.20 3.40 3.50 3.40 3.40 3.30 3.50 3.60 3.50 3.50 3.40 3.60 T.C. 19.3 18.4 20.7 25.6 29.1 22.5 22.4 20.9 26.1 29.8 25.8 26.4 21.2 26.7 30.4 S.C. 19.2 18.4 19.3 20.1 15.4 22.5 22.4 20.9 22.1 16.6 25.8 26.3 21.2 24.0 17.8 KW 3.40 3.40 3.30 3.50 3.70 3.60 3.50 3.50 3.60 3.70 3.70 3.70 3.60 3.80 3.80 NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handlers Coils T.C. S.C. KW – FC/MC/PC37 1.03 1.02 1.02 – FC/MC/PC43 1.03 1.02 1.02 – FC/MC/PC48 1.03 1.03 1.02 – UC48 1.04 1.03 1.02 AHE36C – 1.05 1.04 0.96 AHE42D – 1.05 1.05 0.94 AHR36B – 1.04 1.04 1.02 AHR42C – 1.04 1.04 1.01 AHV36C – 1.04 1.04 0.97 AHV42D – 1.05 1.05 0.95 AV*36 – 1.05 1.04 0.96 MV12B FC/MC43B 1.04 1.04 0.97 MV12D FC/MC48D 1.06 1.05 0.93 MV16C FC/MC43C 1.05 1.04 0.96 MV16C FC/MC48C 1.05 1.05 0.95 MX12B FC/MC43B 1.04 1.04 0.97 MX12D FC/MC48D 1.05 1.05 0.95 MX16C FC/MC43C 1.05 1.04 0.94 MX16C FC/MC48C 1.06 1.05 0.93 Continued on next page. 30 Johnson Controls Unitary Products 571209-YTG-C-1012 Furnaces Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW T*(8,L)V*A12 FC/MC/PC37A 1.03 1.03 1.00 T*9X*C16 FC/MC/PC43C 1.05 1.07 0.97 T*(8,L)V*B12 FC/MC/PC43B 1.04 1.06 1.01 T*9X*C16 FC/MC/PC48C 1.06 1.09 0.96 T*(8,L)V*C16 FC/MC/PC43C 1.04 1.04 0.96 T*9X*C16 UC48C 1.07 1.09 0.97 T*(8,L)V*C16 FC/MC/PC48C 1.05 1.05 0.96 T*9X*C20 FC/MC/PC43C 1.05 1.04 0.96 T*(8,L)V*C16 UC48C 1.05 1.05 0.96 T*9X*C20 FC/MC/PC48C 1.05 1.05 0.95 T*(8,L)V*C20 FC/MC/PC43C 1.04 1.04 0.96 T*9X*C20 UC48C 1.06 1.05 0.96 T*(8,L)V*C20 FC/MC/PC48C 1.05 1.05 0.95 T*9X*D20 FC/MC/PC48D 1.05 1.05 0.95 T*(8,L)V*C20 UC48C 1.06 1.05 0.95 T*9X*D20 UC48D 1.06 1.05 0.95 T*(8,L)X*A12 FC/MC/PC37A 1.06 1.07 0.97 Y*(8,L)C*A12 FC/MC/PC37A 1.03 1.03 1.00 T*(8,L)X*B12 FC/MC/PC43B 1.05 1.08 0.97 Y*(8,L)C*B12 FC/MC/PC43B 1.04 1.06 1.01 T*(8,L)X*C16 FC/MC/PC43C 1.05 1.04 0.94 Y*(8,L)C*C16 FC/MC/PC43C 1.04 1.04 0.96 T*(8,L)X*C16 FC/MC/PC48C 1.06 1.05 0.93 Y*(8,L)C*C16 FC/MC/PC48C 1.05 1.05 0.96 T*(8,L)X*C16 UC48C 1.06 1.06 0.93 Y*(8,L)C*C16 UC48C 1.05 1.05 0.96 T*(8,L)X*C20 FC/MC/PC43C 1.05 1.07 0.95 Y*(8,L)C*C20 FC/MC/PC43C 1.04 1.04 0.96 T*(8,L)X*C20 FC/MC/PC48C 1.07 1.09 0.95 Y*(8,L)C*C20 FC/MC/PC48C 1.05 1.05 0.95 T*(8,L)X*C20 UC48C 1.07 1.10 0.94 Y*(8,L)C*C20 UC48C 1.06 1.05 0.95 T*9(C,V)*B12 FC/MC/PC43B 1.03 1.03 1.00 Y*9C*B12 FC/MC/PC43B 1.03 1.03 1.00 T*9(C,V)*C16 FC/MC/PC43C 1.04 1.03 0.99 Y*9C*C16 FC/MC/PC43C 1.04 1.03 0.99 T*9(C,V)*C16 FC/MC/PC48C 1.05 1.04 0.97 Y*9C*C16 FC/MC/PC48C 1.05 1.04 0.97 T*9(C,V)*C16 UC48C 1.05 1.04 0.97 Y*9C*C16 UC48C 1.05 1.04 0.97 T*9(C,V)*C20 FC/MC/PC43C 1.04 1.04 0.97 Y*9C*C20 FC/MC/PC43C 1.04 1.04 0.97 T*9(C,V)*C20 FC/MC/PC48C 1.07 1.10 0.99 Y*9C*C20 FC/MC/PC48C 1.07 1.10 0.99 T*9(C,V)*C20 UC48C 1.07 1.10 1.00 Y*9C*C20 UC48C 1.07 1.10 1.00 T*9(C,V)*D20 FC/MC/PC48D 1.05 1.04 0.96 Y*9C*D20 FC/MC/PC48D 1.05 1.04 0.96 T*9(C,V)*D20 UC48D 1.05 1.04 0.97 Y*9C*D20 UC48D 1.05 1.04 0.97 T*9X*B12 FC/MC/PC43B 1.05 1.07 0.97 Johnson Controls Unitary Products 31 571209-YTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. YHJD42S41S4 INDOOR COIL MODEL NO. AHP48 IDCFM CONDENSING ENTERING AIR TEMPERATURE 1200 1400 1600 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 42.5 44.2 45.0 49.4 52.7 44.4 45.8 46.4 50.5 53.5 46.4 47.4 47.7 51.5 54.4 S.C. 42.5 38.4 32.9 32.8 26.7 44.4 42.2 35.3 34.7 27.6 46.4 46.0 37.6 36.7 28.6 KW 2.70 2.80 2.80 2.80 2.90 2.80 2.80 2.90 2.90 2.90 2.90 2.90 2.90 3.00 3.00 65 75 85 95 105 115 125 80 T.C. 39.9 40.7 41.7 46.3 49.8 41.8 42.3 42.9 47.2 50.6 43.7 43.9 44.1 48.1 51.3 S.C. 39.9 36.8 31.4 31.4 25.4 41.8 40.0 33.7 33.3 26.4 43.7 43.2 36.0 35.3 27.4 3.20 KW 2.90 2.90 2.90 3.00 3.10 3.00 3.00 3.00 3.10 3.10 3.10 3.10 3.10 3.20 T.C. 37.4 37.3 38.4 43.2 47.0 39.2 38.8 39.5 44.0 47.6 41.0 40.4 40.6 44.8 48.3 S.C. 37.4 35.1 29.8 29.9 24.1 39.2 37.8 32.1 32.0 25.1 41.0 40.4 34.4 34.0 26.1 3.40 KW 3.10 3.10 3.10 3.20 3.30 3.20 3.20 3.20 3.30 3.30 3.30 3.30 3.30 3.40 T.C. 34.8 33.9 35.0 40.1 44.1 36.6 35.4 36.0 40.7 44.7 38.3 36.8 37.0 41.4 45.3 S.C. 34.8 33.4 28.3 28.5 22.8 36.6 35.4 30.6 29.9 23.8 38.3 36.8 32.8 32.6 24.8 3.60 KW 3.30 3.30 3.30 3.40 3.50 3.40 3.40 3.40 3.50 3.50 3.50 3.50 3.50 3.60 T.C. 31.6 31.2 30.9 36.1 40.5 33.4 32.8 31.7 37.1 41.2 35.3 34.5 32.6 38.0 42.0 S.C. 31.6 31.2 26.5 26.9 21.3 33.4 32.8 28.6 29.1 22.4 35.3 34.5 30.8 31.3 23.6 3.90 KW 3.50 3.50 3.50 3.60 3.70 3.60 3.60 3.60 3.70 3.80 3.80 3.70 3.70 3.80 T.C. 28.3 28.5 26.7 32.1 36.9 30.3 30.3 27.4 33.4 37.8 32.2 32.1 28.1 34.7 38.6 S.C. 28.3 28.5 24.6 25.3 19.7 30.3 30.3 26.7 27.6 21.0 32.2 32.1 28.1 29.9 22.4 4.10 KW 3.70 3.70 3.60 3.80 3.90 3.80 3.80 3.70 3.90 4.00 4.00 4.00 3.80 4.00 T.C. 25.1 25.8 22.6 28.1 33.3 27.1 27.8 23.1 29.7 34.3 29.1 29.7 23.7 31.3 35.3 S.C. 25.1 25.8 22.6 23.6 18.1 27.1 27.8 23.1 26.1 19.6 29.1 29.7 23.7 28.6 21.2 KW 3.90 3.90 3.80 4.00 4.20 4.00 4.00 3.90 4.10 4.30 4.20 4.20 4.00 4.20 4.40 NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handlers Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW UC60C 0.96 0.99 1.00 – FC/MC/PC60 0.96 0.99 1.01 T*9(C,V)*C16 – UC60 0.96 0.98 1.02 T*9(C,V)*C20 FC/PC60C 0.97 1.00 0.99 0.94 T*9(C,V)*C20 UC60C 0.97 0.99 0.99 1.01 T*9(C,V)*D20 FC/MC/PC60D 0.97 1.00 0.98 0.96 T*9(C,V)*D20 UC60D 0.97 1.00 0.98 0.94 T*9X*C16 FC/PC60C 1.00 1.04 0.97 0.94 T*9X*C16 UC60C 0.97 1.00 0.96 0.97 T*9X*C20 FC/PC60C 1.00 1.05 0.96 0.96 T*9X*C20 UC60C 0.98 1.00 0.96 0.94 T*9X*D20 FC/MC/PC60D 1.01 1.08 0.95 0.94 T*9X*D20 UC60D 1.00 1.05 0.95 Y*(8,L)C*C16 FC/PC60C 0.97 1.00 0.98 AHE48D AHR48D AHV48D AV*48 AV*60 MV16C MV20D MX16C MX20D – 0.98 – 0.96 – 0.97 – 0.98 – 0.98 FC60C FC/MC60D FC60C FC/MC60D 0.98 0.98 0.98 1.01 1.01 0.96 0.97 1.01 1.01 1.00 1.00 1.01 1.06 Furnaces Coils T.C. S.C. KW Y*(8,L)C*C16 UC60C 0.97 1.00 0.97 T*(8,L)V*C16 FC/PC60C 0.97 1.00 0.98 Y*(8,L)C*C20 FC/PC60C 0.98 1.00 0.96 T*(8,L)V*C16 UC60C 0.97 1.00 0.97 Y*(8,L)C*C20 UC60C 0.97 1.00 0.96 T*(8,L)V*C20 FC/PC60C 0.98 1.00 0.96 Y*9C*C16 FC/PC60C 0.97 0.99 1.01 T*(8,L)V*C20 UC60C 0.97 1.00 0.96 Y*9C*C16 UC60C 0.96 0.99 1.00 T*(8,L)X*C16 FC/PC60C 0.98 1.01 0.94 Y*9C*C20 FC/PC60C 0.97 1.00 0.99 T*(8,L)X*C16 UC60C 0.98 1.01 0.94 Y*9C*C20 UC60C 0.97 0.99 0.99 T*(8,L)X*C20 FC/PC60C 1.01 1.06 0.96 Y*9C*D20 FC/MC/PC60D 0.97 1.00 0.98 T*(8,L)X*C20 UC60C 0.98 1.04 0.95 Y*9C*D20 UC60D 0.97 1.00 0.98 T*9(C,V)*C16 FC/PC60C 0.97 0.99 1.01 32 Johnson Controls Unitary Products 571209-YTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. YHJD48S41S4 INDOOR COIL MODEL NO. AHP48 CONDENSING ENTERING AIR TEMPERATURE IDCFM 1510 1710 1910 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 47.6 50.1 49.8 54.1 60.7 49.4 50.8 51.0 55.8 61.9 51.2 51.5 52.2 57.5 63.1 65 75 85 95 105 115 125 80 S.C. 47.6 44.7 37.8 37.0 30.4 49.4 48.3 39.9 39.3 31.5 51.2 51.5 42.0 41.6 32.6 KW 2.90 2.90 2.90 3.00 3.00 3.00 3.00 3.00 3.00 3.10 3.10 3.10 3.10 3.10 3.20 59.0 T.C. 45.1 46.6 46.5 50.8 56.9 46.7 47.2 47.5 52.2 58.0 48.4 47.9 48.5 53.6 S.C. 45.1 43.1 36.2 35.6 28.9 46.7 45.8 38.3 37.8 30.0 48.4 47.9 40.3 40.0 31.1 KW 3.20 3.20 3.20 3.20 3.30 3.20 3.20 3.20 3.30 3.30 3.30 3.30 3.30 3.40 3.40 55.0 T.C. 42.5 43.1 43.2 47.5 53.2 44.1 43.7 44.0 48.6 54.1 45.6 44.3 44.7 49.7 S.C. 42.5 41.5 34.7 34.2 27.3 44.1 43.3 36.7 36.2 28.4 45.6 44.3 38.7 38.3 29.6 KW 3.40 3.40 3.40 3.50 3.50 3.50 3.50 3.50 3.50 3.60 3.60 3.60 3.60 3.60 3.70 51.0 T.C. 40.0 39.6 39.9 44.2 49.4 41.4 40.2 40.4 45.0 50.2 42.8 40.7 41.0 45.8 S.C. 40.0 39.6 33.1 32.7 25.8 41.4 40.2 35.0 34.7 26.9 42.8 40.7 37.0 36.6 28.0 KW 3.60 3.60 3.60 3.70 3.80 3.70 3.70 3.70 3.80 3.90 3.80 3.80 3.80 3.90 4.00 46.6 T.C. 37.2 37.1 36.3 40.6 45.3 38.5 37.8 36.8 41.1 45.9 39.7 38.6 37.2 41.7 S.C. 37.2 37.1 31.6 31.3 24.2 38.5 37.8 33.5 33.2 25.2 39.7 38.6 35.4 35.1 26.3 KW 3.90 3.90 3.90 4.00 4.10 4.00 4.00 3.90 4.00 4.20 4.10 4.10 4.00 4.10 4.20 42.1 T.C. 34.5 34.5 32.8 36.9 41.1 35.5 35.5 33.1 37.2 41.6 36.6 36.4 33.5 37.6 S.C. 34.5 34.5 30.0 29.8 22.5 35.5 35.5 31.9 31.7 23.6 36.6 36.4 33.5 33.5 24.6 KW 4.10 4.10 4.10 4.20 4.30 4.20 4.20 4.20 4.30 4.40 4.40 4.40 4.30 4.40 4.50 37.7 T.C. 31.7 31.9 29.3 33.2 37.0 32.6 33.1 29.5 33.3 37.3 33.5 34.2 29.7 33.4 S.C. 31.7 31.9 28.5 28.3 20.9 32.6 33.1 29.5 30.1 21.9 33.5 34.2 29.7 31.9 22.9 KW 4.40 4.40 4.30 4.50 4.60 4.50 4.50 4.40 4.50 4.70 4.60 4.60 4.50 4.60 4.80 NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handlers Coils T.C. S.C. KW – FC/MC/PC60 0.98 0.97 0.98 – FC/MC62 0.99 0.98 0.98 – UC60 0.97 0.95 0.97 AHE48D – 0.99 0.97 0.93 AHE60D – 1.00 0.99 0.92 AHR48D – 0.98 0.95 0.98 AHR60D – 0.98 0.97 0.97 AHV48D – 0.99 0.96 0.94 AHV60D – 0.99 0.99 0.94 AV*48 – 0.99 0.99 0.93 AV*60 – 1.00 0.99 0.93 MV16C FC60C 0.99 0.99 0.94 MV20D FC/MC60D 0.99 0.99 0.94 MV20D FC/MC62D 1.00 0.99 0.93 MX16C FC60C 1.00 0.99 0.92 MX20D FC/MC60D 1.00 1.00 0.91 MX20D FC/MC62D 1.01 1.00 0.91 Continued on next page. Johnson Controls Unitary Products 33 571209-YTG-C-1012 Furnaces Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW T*(8,L)V*C16 FC/MC62D 0.99 0.99 0.95 T*9X*C16 UC60C 0.98 0.96 0.94 T*(8,L)V*C16 FC/PC60C 0.98 0.98 0.96 T*9X*C20 FC/MC62D 1.00 0.99 0.94 T*(8,L)V*C16 UC60C 0.98 0.95 0.96 T*9X*C20 FC/PC60C 0.99 0.99 0.94 T*(8,L)V*C20 FC/MC62D 1.00 0.99 0.95 T*9X*C20 UC60C 0.99 0.96 0.94 T*(8,L)V*C20 FC/PC60C 0.99 0.98 0.96 T*9X*D20 FC/MC/PC60D 1.00 0.96 0.90 T*(8,L)V*C20 UC60C 0.98 0.96 0.94 T*9X*D20 FC/MC62D 1.00 0.99 0.95 T*(8,L)X*C16 FC/MC62D 1.00 0.99 0.95 T*9X*D20 UC60D 0.98 0.95 0.89 T*(8,L)X*C16 FC/PC60C 0.99 0.99 0.94 Y*(8,L)C*C16 FC/MC62D 0.99 0.99 0.95 T*(8,L)X*C16 UC60C 0.98 0.96 0.94 Y*(8,L)C*C16 FC/PC60C 0.98 0.98 0.96 T*(8,L)X*C20 FC/MC62D 1.00 0.99 0.94 Y*(8,L)C*C16 UC60C 0.98 0.95 0.96 T*(8,L)X*C20 FC/PC60C 0.99 0.99 0.94 Y*(8,L)C*C20 FC/MC62D 1.00 0.99 0.95 T*(8,L)X*C20 UC60C 1.00 0.97 0.90 Y*(8,L)C*C20 FC/PC60C 0.99 0.98 0.96 T*9(C,V)*C16 FC/MC62D 0.99 0.99 0.96 Y*(8,L)C*C20 UC60C 0.98 0.96 0.94 T*9(C,V)*C16 FC/PC60C 0.98 0.98 0.97 Y*9C*C16 FC/MC62D 0.99 0.99 0.96 T*9(C,V)*C16 UC60C 0.98 0.95 0.97 Y*9C*C16 FC/PC60C 0.98 0.98 0.97 T*9(C,V)*C20 FC/MC62D 0.99 0.98 0.98 Y*9C*C16 UC60C 0.98 0.95 0.97 T*9(C,V)*C20 FC/PC60C 0.98 0.97 0.97 Y*9C*C20 FC/MC62D 0.99 0.98 0.98 T*9(C,V)*C20 UC60C 0.98 0.95 0.97 Y*9C*C20 FC/PC60C 0.98 0.97 0.97 T*9(C,V)*D20 FC/MC/PC60D 0.99 0.98 0.97 Y*9C*C20 UC60C 0.98 0.95 0.97 T*9(C,V)*D20 FC/MC62D 0.99 0.98 0.96 Y*9C*D20 FC/MC/PC60D 0.99 0.98 0.97 T*9(C,V)*D20 UC60D 0.98 0.95 0.96 Y*9C*D20 FC/MC62D 0.99 0.98 0.96 T*9X*C16 FC/MC62D 1.00 0.99 0.95 Y*9C*D20 UC60D 0.98 0.95 0.96 T*9X*C16 FC/PC60C 0.99 0.99 0.95 34 Johnson Controls Unitary Products 571209-YTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. YHJD60S41S5 INDOOR COIL MODEL NO. AHX60 CONDENSING ENTERING AIR TEMPERATURE IDCFM 1800 2000 2200 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 57.5 60.5 60.5 66.0 72.0 59.4 61.6 61.6 67.1 73.0 61.2 62.7 62.6 68.2 74.0 S.C. 57.1 52.5 44.9 44.2 35.6 58.9 55.6 46.8 46.2 36.7 60.8 58.6 48.8 48.2 37.7 KW 3.59 3.62 3.62 3.68 3.75 3.68 3.70 3.71 3.76 3.83 3.78 3.79 3.79 3.85 3.92 T.C. 55.4 57.7 57.7 63.0 68.8 57.1 58.6 58.6 64.0 69.7 58.8 59.6 59.5 65.0 70.7 S.C. 55.0 51.3 43.6 42.9 34.2 56.7 54.0 45.5 44.9 35.3 58.4 56.8 47.4 46.8 36.4 KW 4.02 4.05 4.05 4.11 4.18 4.11 4.13 4.13 4.19 4.27 4.21 4.22 4.21 4.28 4.36 T.C. 53.3 54.8 54.9 60.1 65.6 54.9 55.7 55.6 61.0 66.5 56.5 56.5 56.3 61.8 67.4 S.C. 52.9 50.0 42.2 41.6 32.8 54.5 52.5 44.1 43.6 33.9 56.1 54.9 46.1 45.5 35.0 KW 4.45 4.47 4.47 4.54 4.61 4.55 4.56 4.56 4.62 4.70 4.64 4.64 4.64 4.71 4.79 T.C. 51.2 51.9 52.0 57.1 62.4 52.6 52.7 52.6 57.9 63.2 54.1 53.5 53.1 58.6 64.0 S.C. 50.8 48.8 40.9 40.4 31.4 52.3 50.9 42.8 42.2 32.5 53.7 53.1 44.7 44.1 33.7 KW 4.89 4.90 4.90 4.97 5.05 4.98 4.98 4.98 5.06 5.14 5.07 5.07 5.06 5.14 5.23 T.C. 48.5 48.3 48.6 53.4 58.5 49.8 49.5 49.1 54.0 59.1 51.2 50.6 49.5 54.6 59.7 S.C. 48.1 46.6 39.4 38.8 29.9 49.5 48.4 41.3 40.7 31.0 50.8 50.2 43.1 42.6 32.1 KW 5.43 5.42 5.43 5.50 5.58 5.52 5.52 5.51 5.59 5.67 5.62 5.62 5.60 5.68 5.76 T.C. 45.8 44.8 45.2 49.6 54.6 47.0 46.3 45.5 50.1 55.0 48.3 47.7 45.9 50.6 55.5 S.C. 45.5 44.5 37.9 37.3 28.5 46.7 45.9 39.7 39.2 29.5 47.9 47.4 41.6 41.1 30.5 KW 5.97 5.95 5.97 6.04 6.12 6.07 6.06 6.05 6.12 6.21 6.17 6.16 6.13 6.21 6.29 T.C. 43.1 41.2 41.7 45.9 50.7 44.2 43.0 42.0 46.2 50.9 45.4 44.9 42.3 46.5 51.2 S.C. 42.8 41.2 36.3 35.7 27.0 43.9 43.0 38.2 37.6 28.0 45.0 44.5 40.0 39.5 28.9 KW 6.51 6.48 6.50 6.57 6.65 6.62 6.59 6.58 6.66 6.74 6.72 6.71 6.66 6.74 6.82 65 75 85 95 105 115 125 80 NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handlers Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW – FC/MC62 0.99 0.97 0.96 T*(8,L)V*C20 FC/MC62D 0.98 0.93 0.94 – FC64 0.98 1.01 0.99 T*(8,L)V*C20 FC64D 0.98 1.01 0.98 AHE60D – 1.01 0.97 0.94 T*(8,L)X*C20 FC/MC62D 0.99 0.95 0.91 AHR60D – 1.00 1.00 1.00 T*(8,L)X*C20 FC64D 0.97 0.97 0.93 AHV60D – 0.99 0.92 0.93 T*9(C,V)*C20 FC/MC62D 0.98 0.93 0.94 MV20D FC/MC62D 1.00 0.98 0.94 T*9(C,V)*C20 FC64D 0.96 0.96 0.95 MV20D FC64D 0.98 1.02 0.97 T*9(C,V)*D20 FC/MC62D 0.99 0.93 0.94 MX20D FC/MC62D 1.01 0.97 0.93 T*9(C,V)*D20 FC64D 0.96 0.95 0.95 MX20D FC64D 0.98 1.01 0.94 T*9X*C20 FC/MC62D 0.99 0.95 0.91 T*9X*C20 FC64D 0.96 0.95 0.93 T*9X*D20 FC/MC62D 0.99 0.95 0.92 T*9X*D20 FC64D 0.97 0.96 0.94 Y*(8,L)C*C20 FC/MC62D 0.98 0.93 0.94 Y*(8,L)C*C20 FC64D 0.98 1.01 0.98 Y*9C*C20 FC/MC62D 0.98 0.93 0.94 Y*9C*C20 FC64D 0.96 0.96 0.96 Y*9C*D20 FC/MC62D 0.99 0.93 0.94 Y*9C*D20 FC64D 0.96 0.95 0.95 Johnson Controls Unitary Products 35 571209-YTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT YHJD18S41S2 FC35 ID CFM AIR TEMP. ENTERING INDOOR COIL MBH COP KW MBH COP KW MBH COP KW 60 21.1 4.1 1.50 22.2 4.5 1.44 23.3 4.9 1.39 70 20.5 3.6 1.65 21.6 4.0 1.59 22.6 4.3 1.53 80 19.9 3.2 1.81 20.9 3.5 1.74 21.9 3.9 1.66 60 18.6 3.8 1.45 19.2 4.0 1.41 19.8 4.2 1.38 70 17.7 3.3 1.60 18.4 3.5 1.55 19.1 3.7 1.51 80 16.8 2.8 1.74 17.6 3.1 1.69 18.4 3.3 1.64 60 16.7 3.4 1.43 17.3 3.6 1.40 17.9 3.8 1.37 70 16.1 3.0 1.57 16.8 3.2 1.53 17.4 3.4 1.50 80 15.6 2.7 1.70 16.3 2.9 1.66 17.0 3.1 1.62 60 14.6 3.1 1.39 15.1 3.2 1.37 15.5 3.4 1.36 70 14.2 2.7 1.52 14.6 2.9 1.50 15.0 3.0 1.48 80 13.7 2.4 1.66 14.1 2.5 1.63 14.4 2.6 1.61 60 11.7 2.6 1.34 12.0 2.6 1.34 12.3 2.7 1.34 70 11.2 2.2 1.48 11.6 2.3 1.47 11.9 2.4 1.46 80 10.8 2.0 1.62 11.1 2.0 1.60 11.5 2.1 1.58 60 10.1 2.3 1.31 10.3 2.3 1.31 10.4 2.3 1.32 70 9.6 1.9 1.45 9.9 2.0 1.44 10.2 2.1 1.44 80 9.1 1.7 1.59 9.5 1.8 1.58 9.9 1.9 1.57 60 47 40 30 17 10 450 600 750 NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. Air Handlers Coils MBH COP KW – FC/MC/PC18 1.05 0.94 1.13 – FC/MC/PC24 1.06 0.98 1.08 – FC/MC/PC30 1.06 0.98 1.08 – UC24 1.05 0.98 1.08 – UC30 1.05 0.98 1.08 AHE18B – 1.03 1.01 1.02 AHR18B – 1.05 0.97 1.09 AHV18B – 1.03 1.00 1.03 AV*24 – 1.03 1.03 1.00 MV12B FC/MC/PC18B 1.03 1.01 1.02 MV12B FC/MC24B 1.04 1.03 1.00 MV12B FC/MC30B 1.04 1.03 1.00 MX12B FC/MC/PC18B 1.03 1.01 1.02 MX12B FC/MC24B 1.03 1.08 0.96 MX12B FC/MC30B 1.03 1.08 0.96 Continued on next page. 36 Johnson Controls Unitary Products 571209-YTG-C-1012 Furnaces Coils MBH COP KW Furnaces Coils MBH COP KW T*(8,L)V*A12 FC/MC/PC18A 1.03 0.99 1.04 T*9(C,V)*B12 UC18B 1.04 1.02 1.01 T*(8,L)V*A12 FC/MC/PC24A 1.04 1.06 0.98 T*9(C,V)*B12 UC24B 1.03 1.05 0.99 T*(8,L)V*A12 FC/MC/PC30A 1.04 1.06 0.98 T*9(C,V)*B12 UC30B 1.03 1.05 0.99 T*(8,L)V*A12 UC18A 1.04 1.02 1.02 T*9X*A10 FC/MC/PC18A 1.03 0.99 1.04 T*(8,L)V*A12 UC24A 1.04 1.06 0.98 T*9X*A10 FC/MC/PC24A 1.04 1.03 1.00 T*(8,L)V*A12 UC30A 1.04 1.06 0.98 T*9X*A10 FC/MC/PC30A 1.04 1.03 1.00 T*(8,L)V*B12 FC/MC/PC18B 1.03 0.99 1.04 T*9X*B12 FC/MC/PC18B 1.03 1.01 1.02 T*(8,L)V*B12 FC/MC/PC24B 1.03 1.04 0.99 T*9X*B12 FC/MC/PC24B 1.03 1.06 0.97 T*(8,L)V*B12 FC/MC/PC30B 1.03 1.04 0.99 T*9X*B12 FC/MC/PC30B 1.03 1.06 0.97 T*(8,L)V*B12 UC18B 1.04 1.02 1.01 T*9X*B12 UC18B 1.03 1.03 1.00 T*(8,L)V*B12 UC24B 1.03 1.06 0.97 T*9X*B12 UC24B 1.03 1.06 0.97 T*(8,L)V*B12 UC30B 1.03 1.06 0.97 T*9X*B12 UC30B 1.03 1.06 0.97 T*(8,L)X*A12 FC/MC/PC18A 1.02 0.98 1.05 Y*(8,L)C*A12 FC/MC/PC18A 1.03 0.99 1.04 T*(8,L)X*A12 FC/MC/PC24A 1.03 1.06 0.97 Y*(8,L)C*A12 FC/MC/PC24A 1.04 1.06 0.98 T*(8,L)X*A12 FC/MC/PC30A 1.03 1.06 0.97 Y*(8,L)C*A12 FC/MC/PC30A 1.04 1.06 0.98 T*(8,L)X*A12 UC18A 1.03 1.03 1.00 Y*(8,L)C*A12 UC18A 1.04 1.02 1.02 T*(8,L)X*A12 UC24A 1.03 1.05 0.98 Y*(8,L)C*A12 UC24A 1.04 1.06 0.98 T*(8,L)X*A12 UC30A 1.03 1.05 0.98 Y*(8,L)C*A12 UC30A 1.04 1.06 0.98 T*(8,L)X*B12 FC/MC/PC18B 1.03 1.01 1.02 Y*(8,L)C*B12 FC/MC/PC18B 1.03 0.99 1.04 T*(8,L)X*B12 FC/MC/PC24B 1.03 1.06 0.97 Y*(8,L)C*B12 FC/MC/PC24B 1.03 1.04 0.99 T*(8,L)X*B12 FC/MC/PC30B 1.03 1.06 0.97 Y*(8,L)C*B12 FC/MC/PC30B 1.03 1.04 0.99 T*(8,L)X*B12 UC18B 1.03 1.03 1.00 Y*(8,L)C*B12 UC18B 1.04 1.02 1.01 T*(8,L)X*B12 UC24B 1.03 1.06 0.97 Y*(8,L)C*B12 UC24B 1.03 1.06 0.97 T*(8,L)X*B12 UC30B 1.03 1.06 0.97 Y*(8,L)C*B12 UC30B 1.03 1.06 0.97 T*9V*A10 FC/MC/PC18A 1.03 0.98 1.05 Y*9C*B12 FC/MC/PC18B 1.03 1.01 1.02 T*9V*A10 FC/MC/PC24A 1.04 1.03 1.01 Y*9C*B12 FC/MC/PC24B 1.03 1.05 0.99 T*9V*A10 FC/MC/PC30A 1.04 1.03 1.01 Y*9C*B12 FC/MC/PC30B 1.03 1.05 0.99 T*9(C,V)*B12 FC/MC/PC18B 1.03 1.01 1.02 Y*9C*B12 UC18B 1.04 1.02 1.01 T*9(C,V)*B12 FC/MC/PC24B 1.03 1.05 0.99 Y*9C*B12 UC24B 1.03 1.05 0.99 T*9(C,V)*B12 FC/MC/PC30B 1.03 1.05 0.99 Y*9C*B12 UC30B 1.03 1.05 0.99 Johnson Controls Unitary Products 37 571209-YTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT 60 47 40 30 17 10 AIR TEMP. ENTERING INDOOR COIL 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 YHJD24S41S4 AHP30 600 COP 3.8 3.5 3.3 3.6 3.4 3.1 3.5 3.2 3.0 3.1 2.8 2.6 2.5 2.4 2.2 2.4 2.0 1.7 MBH 28.3 27.5 26.7 24.9 23.8 22.7 23.1 21.9 20.7 19.0 17.7 16.4 13.8 13.3 12.5 12.7 11.1 9.4 KW 2.20 2.27 2.35 2.03 2.08 2.14 1.94 1.98 2.03 1.79 1.83 1.87 1.64 1.65 1.68 1.58 1.59 1.61 MBH 27.5 26.9 26.3 24.5 24.0 23.4 22.7 22.0 21.2 19.6 18.6 17.6 13.9 13.8 13.4 11.1 10.7 10.2 ID CFM 800 COP 3.7 3.5 3.3 3.6 3.4 3.2 3.5 3.2 3.0 3.2 2.9 2.7 2.4 2.3 2.2 2.0 1.9 1.8 KW 2.15 2.23 2.32 2.01 2.06 2.15 1.93 1.99 2.05 1.82 1.87 1.92 1.73 1.73 1.75 1.61 1.64 1.68 1000 COP 3.7 3.5 3.3 3.6 3.4 3.3 3.4 3.2 3.1 3.2 3.0 2.8 2.3 2.3 2.3 1.7 1.8 1.9 MBH 26.7 26.4 26.0 24.1 24.1 24.1 22.4 22.0 21.7 20.1 19.4 18.7 14.1 14.3 14.3 9.5 10.3 11.1 KW 2.10 2.19 2.28 1.98 2.10 2.17 1.92 1.99 2.07 1.84 1.90 1.96 1.83 1.82 1.81 1.64 1.69 1.75 NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. Air Handlers – – – – AHE24B AHE30B AHR24B AHV24B AHV30B AHV36C AV*36 MV12B MV12B MX12B MX12B Furnaces T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C20 38 Coils FC/MC/PC32 FC/MC/PC35 FC/MC/PC37 FC/MC/PC43 – – – – – – – FC/MC35B FC/MC43B FC/MC35B FC/MC43B Coils FC/MC/PC32A FC/MC/PC37A FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C FC/MC/PC32A FC/MC/PC37A FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C MBH 1.00 1.00 1.01 1.01 0.97 0.97 0.97 0.94 0.96 0.98 0.96 0.98 0.98 0.97 0.96 COP 1.00 1.00 1.01 1.01 1.05 1.05 0.99 1.02 1.04 1.07 1.06 1.06 1.07 1.08 1.06 KW 1.00 1.00 1.00 1.00 0.92 0.92 0.97 0.93 0.93 0.91 0.90 0.92 0.92 0.90 0.91 MBH 0.96 0.98 0.98 0.98 0.98 0.98 0.95 0.96 0.98 0.98 0.97 0.98 0.97 0.98 0.98 COP 1.03 1.07 1.05 1.07 1.06 1.08 1.04 1.05 1.07 1.11 1.07 1.11 1.08 1.11 1.07 KW 0.93 0.92 0.93 0.92 0.92 0.90 0.92 0.91 0.91 0.89 0.90 0.89 0.90 0.89 0.91 Furnaces T*(8,L)X*C20 T*9V*A10 T*9V*A10 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9X*A10 T*9X*A10 T*9X*B12 T*9X*B12 T*9X*C16 T*9X*C16 T*9X*C20 T*9X*C20 Y*(8,L)C*A12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*(8,L)C*B12 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*9C*B12 Y*9C*B12 Y*9C*C16 Y*9C*C16 Y*9C*C20 Y*9C*C20 Coils FC/MC/PC43C FC/MC/PC32A FC/MC/PC37A FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C FC/MC/PC32A FC/MC/PC37A FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C FC/MC/PC32A FC/MC/PC37A FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C MBH 0.98 0.98 0.99 0.98 0.98 0.98 0.98 0.95 1.00 0.96 0.98 0.98 0.98 0.98 0.98 0.98 0.98 0.96 0.98 0.98 0.98 0.98 0.98 0.95 0.96 0.98 0.98 0.98 0.98 0.95 1.00 COP 1.08 1.02 1.04 1.04 1.06 1.06 1.07 1.03 1.09 1.01 1.04 1.07 1.09 1.07 1.09 1.06 1.08 1.03 1.07 1.05 1.07 1.06 1.08 1.04 1.05 1.04 1.06 1.06 1.07 1.03 1.09 KW 0.90 0.96 0.96 0.94 0.92 0.93 0.92 0.92 0.92 0.95 0.94 0.91 0.90 0.91 0.90 0.92 0.90 0.93 0.92 0.93 0.92 0.92 0.90 0.92 0.91 0.94 0.92 0.93 0.92 0.92 0.92 Johnson Controls Unitary Products 571209-YTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT 60 47 40 30 17 10 AIR TEMP. ENTERING INDOOR COIL 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 YHJD30S41S4 AHP30 800 COP 3.7 3.5 3.3 3.6 3.4 3.1 3.5 3.2 3.0 3.3 2.9 2.6 2.6 2.3 1.9 2.2 1.9 1.6 MBH 32.2 31.6 30.9 28.9 27.9 26.9 26.7 25.6 24.4 23.2 21.3 19.4 17.3 15.4 12.7 14.2 12.1 9.9 KW 2.52 2.64 2.77 2.35 2.43 2.51 2.25 2.32 2.39 2.08 2.16 2.23 1.92 1.97 2.00 1.86 1.87 1.87 MBH 31.2 30.9 30.5 28.3 27.6 26.9 26.5 25.6 24.7 23.4 21.8 20.3 17.8 16.1 13.6 14.4 12.2 10.0 ID CFM 1000 COP 3.7 3.5 3.3 3.6 3.3 3.1 3.4 3.2 3.0 3.3 2.9 2.6 2.7 2.3 1.9 2.2 1.8 1.5 KW 2.47 2.60 2.73 2.33 2.45 2.51 2.25 2.33 2.41 2.11 2.18 2.25 1.95 2.04 2.08 1.94 1.94 1.94 MBH 30.2 30.2 30.2 27.7 27.3 26.9 26.3 25.6 24.9 23.5 22.3 21.1 18.4 16.8 14.5 14.5 12.3 10.1 1200 COP 3.7 3.5 3.3 3.5 3.2 3.1 3.4 3.2 3.0 3.2 3.0 2.7 2.7 2.3 2.0 2.1 1.8 1.5 KW 2.41 2.56 2.70 2.31 2.47 2.50 2.26 2.34 2.43 2.13 2.20 2.26 1.99 2.12 2.16 2.03 2.01 2.00 NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. Air Handlers – – – – AHE30B AHE36C AHR30B AHR36B AHV30B AHV36C AV*36 MV12B MV12B MV16C MV16C MX12B MX12B MX16C MX16C Furnaces T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*B12 Coils FC/MC/PC32 FC/MC/PC35 FC/MC/PC37 FC/MC/PC43 – – – – – – – FC/MC35B FC/MC43B FC/MC35C FC/MC43C FC/MC35B FC/MC43B FC/MC35C FC/MC43C Coils FC/MC/PC32A FC/MC/PC37A FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C FC/MC/PC32A FC/MC/PC37A FC/MC/PC35B Johnson Controls Unitary Products MBH 1.00 1.00 1.04 1.04 1.01 1.02 1.05 1.06 1.01 1.00 1.01 1.01 1.02 1.01 1.02 1.01 1.04 1.00 1.01 COP 1.00 1.00 1.05 1.04 1.07 1.12 1.04 1.05 1.05 1.10 1.12 1.09 1.10 1.10 1.11 1.08 1.12 1.10 1.13 KW 1.00 1.00 1.00 1.00 0.95 0.91 1.01 1.00 0.96 0.91 0.90 0.92 0.93 0.91 0.92 0.94 0.92 0.91 0.90 MBH 1.03 1.02 1.01 1.03 1.01 1.02 1.01 1.02 1.01 1.04 1.02 COP 1.03 1.08 1.06 1.08 1.08 1.11 1.07 1.12 1.07 1.13 1.09 KW 1.00 0.95 0.96 0.95 0.93 0.92 0.95 0.91 0.95 0.93 0.94 Furnaces T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9X*B12 T*9X*B12 T*9X*C16 T*9X*C16 T*9X*C20 T*9X*C20 Y*(8,L)C*A12 Y*(8,L)C*A12 Y*(8,L)C*B12 Y*(8,L)C*B12 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*9C*B12 Y*9C*B12 Y*9C*C16 Y*9C*C16 Y*9C*C20 Y*9C*C20 Coils FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C FC/MC/PC32A FC/MC/PC37A FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C FC/MC/PC35B FC/MC/PC43B FC/MC/PC35C FC/MC/PC43C FC/MC/PC35C FC/MC/PC43C MBH 1.04 1.01 1.01 0.97 0.99 1.02 1.04 1.01 1.03 1.01 1.02 1.01 1.04 1.01 1.03 0.96 0.96 1.03 1.02 1.01 1.03 1.01 1.02 1.01 1.02 1.02 1.04 1.01 1.03 1.01 1.02 COP 1.12 1.10 1.13 1.05 1.09 1.05 1.08 1.08 1.09 1.08 1.11 1.08 1.12 1.09 1.12 1.05 1.04 1.03 1.08 1.06 1.08 1.08 1.11 1.07 1.12 1.05 1.08 1.08 1.09 1.08 1.11 KW 0.92 0.92 0.90 0.92 0.91 0.97 0.96 0.94 0.94 0.93 0.92 0.94 0.92 0.93 0.92 0.91 0.93 1.00 0.95 0.96 0.95 0.93 0.92 0.95 0.91 0.97 0.96 0.94 0.94 0.93 0.92 39 571209-YTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT YHJD36S41S4 AHP36 ID CFM AIR TEMP. ENTERING INDOOR COIL MBH COP KW MBH COP KW MBH COP KW 60 38.0 3.7 3.01 37.2 3.6 3.00 36.4 3.6 2.98 70 37.5 3.5 3.18 36.9 3.4 3.17 36.4 3.4 3.15 80 37.0 3.2 3.34 36.7 3.2 3.33 36.4 3.2 3.32 60 34.7 3.5 2.87 34.0 3.5 2.87 33.3 3.4 2.86 70 34.1 3.3 3.01 33.7 3.3 2.99 33.3 3.3 3.00 80 33.6 3.1 3.14 33.5 3.1 3.16 33.3 3.1 3.18 60 32.3 3.4 2.75 32.0 3.4 2.78 31.7 3.3 2.80 70 31.5 3.2 2.88 31.4 3.2 2.91 31.4 3.1 2.94 80 30.6 3.0 3.00 30.9 3.0 3.04 31.1 3.0 3.08 60 28.4 3.2 2.59 28.5 3.2 2.63 28.7 3.1 2.68 70 27.3 3.0 2.69 27.8 3.0 2.74 28.3 3.0 2.79 80 26.1 2.7 2.79 27.0 2.8 2.85 27.9 2.8 2.91 60 21.8 2.7 2.37 22.9 2.7 2.44 24.0 2.8 2.51 70 21.1 2.5 2.46 22.3 2.6 2.53 23.4 2.6 2.60 80 17.6 2.1 2.47 18.8 2.2 2.55 20.1 2.2 2.63 60 21.2 2.6 2.36 20.7 2.5 2.43 20.3 2.4 2.51 70 18.2 2.2 2.38 18.0 2.1 2.46 17.8 2.1 2.53 80 15.2 1.9 2.40 15.3 1.8 2.48 15.3 1.8 2.56 60 47 40 30 17 10 1000 1200 1400 NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. Air Handlers Coils MBH COP KW – FC/MC/PC37 0.94 0.96 0.97 – FC/MC/PC43 0.94 0.96 0.97 – FC/MC/PC48 0.93 0.96 0.97 – UC48 0.95 0.99 0.96 AHE36C – 0.92 1.02 0.90 AHE42D – 0.91 1.03 0.89 AHR36B – 0.94 0.97 0.97 AHR42C – 0.93 0.98 0.95 AHV36C – 0.92 1.01 0.91 AHV42D – 0.91 1.03 0.89 AV*36 – 0.92 1.02 0.90 MV12B FC/MC43B 0.92 1.01 0.91 MV12D FC/MC48D 0.91 1.04 0.88 MV16C FC/MC43C 0.92 1.02 0.90 MV16C FC/MC48C 0.91 1.02 0.89 MX12B FC/MC43B 0.92 1.01 0.91 MX12D FC/MC48D 0.91 1.02 0.89 MX16C FC/MC43C 0.91 1.04 0.88 MX16C FC/MC48C 0.91 1.04 0.88 Continued on next page. 40 Johnson Controls Unitary Products 571209-YTG-C-1012 Furnaces Coils MBH COP KW Furnaces Coils MBH COP KW T*(8,L)V*A12 FC/MC/PC37A 0.93 0.98 0.95 T*9X*C16 FC/MC/PC43C 0.92 1.02 0.90 T*(8,L)V*B12 FC/MC/PC43B 0.93 0.98 0.95 T*9X*C16 FC/MC/PC48C 0.93 1.03 0.90 T*(8,L)V*C16 FC/MC/PC43C 0.92 1.01 0.91 T*9X*C16 UC48C 0.94 1.06 0.88 T*(8,L)V*C16 FC/MC/PC48C 0.91 1.02 0.90 T*9X*C20 FC/MC/PC43C 0.92 1.02 0.90 T*(8,L)V*C16 UC48C 0.93 1.05 0.89 T*9X*C20 FC/MC/PC48C 0.91 1.02 0.90 T*(8,L)V*C20 FC/MC/PC43C 0.92 1.01 0.91 T*9X*C20 UC48C 0.93 1.05 0.88 T*(8,L)V*C20 FC/MC/PC48C 0.91 1.02 0.89 T*9X*D20 FC/MC/PC48D 0.91 1.02 0.89 T*(8,L)V*C20 UC48C 0.93 1.05 0.88 T*9X*D20 UC48D 0.93 1.05 0.88 T*(8,L)X*A12 FC/MC/PC37A 0.93 1.02 0.91 Y*(8,L)C*A12 FC/MC/PC37A 0.93 0.98 0.95 T*(8,L)X*B12 FC/MC/PC43B 0.93 1.02 0.91 Y*(8,L)C*B12 FC/MC/PC43B 0.93 0.98 0.95 T*(8,L)X*C16 FC/MC/PC43C 0.91 1.04 0.88 Y*(8,L)C*C16 FC/MC/PC43C 0.92 1.01 0.91 T*(8,L)X*C16 FC/MC/PC48C 0.91 1.04 0.87 Y*(8,L)C*C16 FC/MC/PC48C 0.91 1.02 0.90 T*(8,L)X*C16 UC48C 0.93 1.07 0.86 Y*(8,L)C*C16 UC48C 0.93 1.05 0.89 T*(8,L)X*C20 FC/MC/PC43C 0.91 1.03 0.89 Y*(8,L)C*C20 FC/MC/PC43C 0.92 1.01 0.91 T*(8,L)X*C20 FC/MC/PC48C 0.93 1.05 0.88 Y*(8,L)C*C20 FC/MC/PC48C 0.91 1.02 0.89 T*(8,L)X*C20 UC48C 0.94 1.07 0.87 Y*(8,L)C*C20 UC48C 0.93 1.05 0.88 T*9(C,V)*B12 FC/MC/PC43B 0.93 0.98 0.95 Y*9C*B12 FC/MC/PC43B 0.93 0.98 0.95 T*9(C,V)*C16 FC/MC/PC43C 0.93 0.99 0.93 Y*9C*C16 FC/MC/PC43C 0.93 0.99 0.93 T*9(C,V)*C16 FC/MC/PC48C 0.92 1.01 0.91 Y*9C*C16 FC/MC/PC48C 0.92 1.01 0.91 T*9(C,V)*C16 UC48C 0.93 1.04 0.90 Y*9C*C16 UC48C 0.93 1.04 0.90 T*9(C,V)*C20 FC/MC/PC43C 0.92 1.01 0.91 Y*9C*C20 FC/MC/PC43C 0.92 1.01 0.91 T*9(C,V)*C20 FC/MC/PC48C 0.94 1.01 0.93 Y*9C*C20 FC/MC/PC48C 0.94 1.01 0.93 T*9(C,V)*C20 UC48C 0.95 1.04 0.91 Y*9C*C20 UC48C 0.95 1.04 0.91 T*9(C,V)*D20 FC/MC/PC48D 0.91 1.01 0.90 Y*9C*D20 FC/MC/PC48D 0.91 1.01 0.90 T*9(C,V)*D20 UC48D 0.93 1.04 0.89 Y*9C*D20 UC48D 0.93 1.04 0.89 T*9X*B12 FC/MC/PC43B 0.93 1.01 0.92 Johnson Controls Unitary Products 41 571209-YTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT YHJD42S41S4 AHP48 ID CFM AIR TEMP. ENTERING INDOOR COIL MBH COP KW MBH COP KW MBH COP KW 60 45.9 4.2 3.23 45.2 4.1 3.20 44.6 4.1 3.18 70 44.7 3.8 3.42 44.5 3.8 3.40 44.4 3.8 3.39 80 43.5 3.5 3.61 43.8 3.6 3.60 44.1 3.6 3.58 60 41.8 4.2 2.92 41.5 4.0 3.07 41.2 3.7 3.22 70 40.8 3.9 3.09 40.3 3.7 3.19 39.8 3.5 3.35 80 39.7 3.6 3.27 39.1 3.4 3.35 38.4 3.3 3.43 60 39.0 4.0 2.85 38.6 3.8 2.98 38.2 3.6 3.12 70 37.7 3.7 3.00 37.1 3.5 3.13 36.5 3.3 3.25 80 36.3 3.4 3.15 35.5 3.2 3.27 34.8 3.0 3.39 60 34.9 3.7 2.73 34.0 3.5 2.85 33.2 3.3 2.97 70 32.6 3.4 2.85 31.7 3.1 2.95 30.8 3.0 3.06 80 30.3 3.0 2.96 29.4 2.8 3.06 28.5 2.6 3.16 60 26.6 3.0 2.64 25.8 2.8 2.71 25.0 2.6 2.79 70 22.6 2.6 2.60 21.9 2.4 2.69 21.2 2.2 2.77 80 20.3 2.2 2.67 19.7 2.1 2.77 19.1 1.9 2.87 60 20.9 2.5 2.47 20.1 2.3 2.57 19.3 2.1 2.66 70 18.7 2.2 2.50 18.0 2.0 2.60 17.4 1.9 2.70 80 16.4 1.9 2.52 15.9 1.8 2.63 15.4 1.7 2.73 60 47 40 30 17 10 1200 1400 1600 NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. Air Handlers Coils MBH COP KW Furnaces Coils MBH COP KW UC60C 1.02 1.04 0.98 – FC/MC/PC60 1.00 1.00 1.00 T*9(C,V)*C16 – UC60 1.02 1.03 0.99 T*9(C,V)*C20 FC/PC60C 0.99 1.02 0.97 0.92 T*9(C,V)*C20 UC60C 1.02 1.05 0.97 1.01 T*9(C,V)*D20 FC/MC/PC60D 0.99 1.03 0.97 0.94 T*9(C,V)*D20 UC60D 1.00 1.06 0.95 0.93 T*9X*C16 FC/PC60C 1.02 1.09 0.93 0.93 T*9X*C16 UC60C 1.00 1.07 0.94 0.95 T*9X*C20 FC/PC60C 1.02 1.11 0.92 0.95 T*9X*C20 UC60C 1.00 1.08 0.93 0.93 T*9X*D20 FC/MC/PC60D 1.02 1.12 0.90 0.89 T*9X*D20 UC60D 1.00 1.11 0.91 Y*(8,L)C*C16 FC/PC60C 0.99 1.03 0.97 AHE48D AHR48D AHV48D AV*48 AV*60 MV16C MV20D MX16C MX20D – 0.98 – 1.00 – 0.98 – 0.98 – 0.98 FC60C FC/MC60D FC60C FC/MC60D 0.99 0.99 0.98 1.00 1.06 0.99 1.04 1.06 1.06 1.04 1.05 1.06 1.12 Furnaces Coils MBH COP KW Y*(8,L)C*C16 UC60C 1.00 1.06 0.94 T*(8,L)V*C16 FC/PC60C 0.99 1.03 0.97 Y*(8,L)C*C20 FC/PC60C 0.99 1.04 0.95 T*(8,L)V*C16 UC60C 1.00 1.06 0.94 Y*(8,L)C*C20 UC60C 1.00 1.08 0.93 T*(8,L)V*C20 FC/PC60C 0.99 1.04 0.95 Y*9C*C16 FC/PC60C 1.00 1.01 1.00 T*(8,L)V*C20 UC60C 1.00 1.08 0.93 Y*9C*C16 UC60C 1.02 1.04 0.98 T*(8,L)X*C16 FC/PC60C 0.98 1.06 0.93 Y*9C*C20 FC/PC60C 0.99 1.02 0.97 T*(8,L)X*C16 UC60C 0.99 1.10 0.90 Y*9C*C20 UC60C 1.02 1.05 0.97 T*(8,L)X*C20 FC/PC60C 1.02 1.11 0.91 Y*9C*D20 FC/MC/PC60D 0.99 1.03 0.97 T*(8,L)X*C20 UC60C 1.02 1.10 0.93 Y*9C*D20 UC60D 1.00 1.06 0.95 T*9(C,V)*C16 FC/PC60C 1.00 1.01 1.00 42 Johnson Controls Unitary Products 571209-YTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT 60 47 40 30 17 10 AIR TEMP. ENTERING INDOOR COIL 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 YHJD48S41S4 AHP48 1400 COP 3.7 3.5 3.3 3.6 3.7 3.7 3.5 3.3 3.0 3.1 2.9 2.8 2.8 2.7 2.4 2.6 2.3 2.1 MBH 53.4 51.9 50.4 46.3 46.5 46.7 42.6 39.8 37.0 32.1 31.7 31.4 27.2 26.6 24.2 23.1 21.7 20.3 KW 4.17 4.32 4.45 3.75 3.71 3.68 3.52 3.57 3.63 3.04 3.16 3.29 2.82 2.89 2.96 2.62 2.71 2.80 MBH 53.2 52.0 50.8 46.6 46.0 45.4 42.8 40.3 37.8 33.2 32.7 32.2 28.1 27.6 25.1 24.4 22.7 21.1 ID CFM 1600 COP 3.7 3.5 3.3 3.6 3.5 3.5 3.5 3.3 3.0 3.1 3.0 2.8 2.9 2.7 2.4 2.6 2.4 2.1 KW 4.17 4.31 4.46 3.77 3.85 3.84 3.55 3.61 3.68 3.12 3.24 3.36 2.88 2.98 3.05 2.72 2.81 2.90 MBH 53.1 52.2 51.3 46.9 45.5 44.2 43.0 40.8 38.7 34.4 33.7 32.9 29.0 28.5 26.1 25.7 23.7 21.8 1800 COP 3.7 3.6 3.4 3.6 3.4 3.2 3.5 3.3 3.0 3.1 3.0 2.8 2.9 2.7 2.4 2.7 2.4 2.1 KW 4.16 4.30 4.46 3.78 3.97 4.01 3.58 3.65 3.72 3.21 3.31 3.42 2.95 3.07 3.14 2.83 2.91 2.99 NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. Air Handlers – – – AHE48D AHE60D AHR48D AHR60D AHV48D AHV60D AV*48 AV*60 MV16C MV20D MV20D MX16C MX20D MX20D Furnaces T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C20 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*C16 Coils FC/MC/PC60 FC/MC62 UC60 – – – – – – – – FC60C FC/MC60D FC/MC62D FC60C FC/MC60D FC/MC62D Coils FC/MC62D FC/PC60C UC60C FC/MC62D FC/PC60C UC60C FC/MC62D FC/PC60C UC60C FC/MC62D FC/PC60C UC60C FC/MC62D Johnson Controls Unitary Products MBH 1.00 0.99 1.00 0.98 0.97 0.97 0.99 0.97 0.98 0.98 0.98 0.98 0.98 0.98 0.98 0.97 0.98 COP 1.00 1.01 1.02 1.06 1.06 0.98 1.01 1.02 1.03 1.07 1.07 1.06 1.06 1.06 1.09 1.09 1.08 KW 1.00 0.98 0.98 0.92 0.91 0.98 0.98 0.95 0.95 0.92 0.91 0.93 0.93 0.93 0.90 0.89 0.91 MBH 0.99 0.99 0.99 0.99 0.99 0.99 0.98 0.98 0.99 0.98 0.98 0.97 0.99 COP 1.03 1.03 1.03 1.04 1.04 1.05 1.05 1.06 1.05 1.05 1.06 1.09 1.03 KW 0.96 0.96 0.96 0.95 0.95 0.95 0.94 0.93 0.95 0.93 0.92 0.89 0.96 Furnaces T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*D20 T*9(C,V)*D20 T*9(C,V)*D20 T*9X*C16 T*9X*C16 T*9X*C16 T*9X*C20 T*9X*C20 T*9X*C20 T*9X*D20 T*9X*D20 T*9X*D20 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C16 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*9C*C16 Y*9C*C16 Y*9C*C16 Y*9C*C20 Y*9C*C20 Y*9C*C20 Y*9C*D20 Y*9C*D20 Y*9C*D20 Coils FC/PC60C UC60C FC/MC62D FC/PC60C UC60C FC/MC/PC60D FC/MC62D UC60D FC/MC62D FC/PC60C UC60C FC/MC62D FC/PC60C UC60C FC/MC/PC60D FC/MC62D UC60D FC/MC62D FC/PC60C UC60C FC/MC62D FC/PC60C UC60C FC/MC62D FC/PC60C UC60C FC/MC62D FC/PC60C UC60C FC/MC/PC60D FC/MC62D UC60D MBH 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.98 0.99 0.98 0.98 0.98 0.97 0.99 0.97 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99 COP 1.03 1.02 1.02 1.03 1.02 1.04 1.02 1.03 1.04 1.05 1.05 1.05 1.06 1.06 1.09 1.04 1.07 1.03 1.03 1.03 1.04 1.04 1.05 1.03 1.03 1.02 1.02 1.03 1.02 1.04 1.02 1.03 KW 0.96 0.97 0.97 0.96 0.97 0.95 0.97 0.96 0.95 0.93 0.95 0.93 0.92 0.93 0.89 0.95 0.90 0.96 0.96 0.96 0.95 0.95 0.95 0.96 0.96 0.97 0.97 0.96 0.97 0.95 0.97 0.96 43 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT YHJD60S41S5 FC/MC62 ID CFM AIR TEMP. ENTERING INDOOR COIL MBH COP KW MBH COP KW MBH COP KW 60 72.1 3.8 5.62 71.1 3.8 5.53 70.1 3.8 5.42 70 70.9 3.4 6.11 70.6 3.4 6.02 70.3 3.5 5.90 80 69.8 3.1 6.62 70.2 3.2 6.50 70.5 3.2 6.40 60 62.7 3.7 4.99 62.4 3.7 4.95 62.1 3.7 4.90 70 61.1 3.3 5.43 61.1 3.5 5.09 61.1 3.8 4.76 80 59.6 3.0 5.86 59.9 3.4 5.23 60.1 3.8 4.61 60 55.6 3.5 4.63 55.9 3.6 4.62 56.2 3.6 4.60 70 54.3 3.1 5.06 54.5 3.2 5.04 54.8 3.2 5.00 80 52.9 2.8 5.50 53.1 2.9 5.46 53.3 2.9 5.40 60 45.3 3.2 4.20 45.7 3.2 4.20 46.1 3.2 4.21 70 43.9 2.9 4.51 44.3 2.9 4.53 44.8 2.9 4.54 80 42.4 2.6 4.82 43.0 2.6 4.86 43.5 2.6 4.90 60 38.0 2.8 3.93 38.5 2.9 3.96 39.1 2.9 4.00 70 35.5 2.5 4.19 36.5 2.5 4.24 37.5 2.6 4.31 80 33.0 2.2 4.47 34.4 2.2 4.53 35.9 2.3 4.61 60 32.3 2.6 3.71 32.8 2.6 3.74 33.3 2.6 3.75 70 31.3 2.3 4.04 31.5 2.3 4.05 31.8 2.3 4.08 80 30.3 2.0 4.35 30.2 2.0 4.36 30.2 2.0 4.38 60 47 40 30 17 10 1600 1800 2000 NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. Air Handlers – – AHE60D AHR60D AHV60D MV20D MV20D MX20D MX20D Coils FC/MC62 FC64 – – – FC/MC62D FC64D FC/MC62D FC64D MBH 1.00 1.03 0.99 1.01 0.99 1.00 1.01 0.99 1.00 COP 1.00 0.95 1.01 0.98 0.97 1.00 0.97 1.02 0.98 KW 1.00 1.08 0.98 1.04 1.02 1.00 1.05 0.97 1.02 Furnaces T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*C20 T*9(C,V)*D20 T*9(C,V)*D20 T*9X*C20 T*9X*C20 T*9X*D20 T*9X*D20 Y*(8,L)C*C20 Y*(8,L)C*C20 Y*9C*C20 Y*9C*C20 Y*9C*C20 Y*9C*D20 Y*9C*D20 Subject to change without notice. Published in U.S.A. Copyright © 2012 by Johnson Controls, Inc. All rights reserved. Johnson Controls Unitary Products 5005 York Drive Norman, OK 73069 Coils FC/MC62D FC64D FC/MC62D FC64D FC64D FC/MC62D FC64D FC/MC62D FC64D FC/MC62D FC64D FC/MC62D FC64D FC/MC62D FC/MC62D FC64D FC/MC62D FC64D MBH 0.99 1.01 0.98 1.00 1.01 0.99 1.01 0.98 1.01 0.98 1.01 0.99 1.01 0.99 0.99 1.01 0.99 1.01 COP 0.96 0.95 0.98 0.95 0.94 0.96 0.94 0.98 0.94 0.97 0.95 0.96 0.95 0.95 0.95 0.94 0.96 0.94 KW 1.03 1.06 1.00 1.05 1.07 1.03 1.07 1.00 1.07 1.01 1.05 1.03 1.06 1.04 1.04 1.08 1.03 1.07 571209-YTG-C-1012 Supersedes: 571209-YTG-B-1211
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : csardom Create Date : 2012:10:05 14:22:00-05:00 Modify Date : 2012:10:05 14:22:00-05:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 9.5.2 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : 571209-YTG-C-1012.fm Creator : csardom Document ID : uuid:effa9122-b076-4193-aa79-4340504a06ea Instance ID : uuid:3b4a6ebc-2762-4773-b9e7-95288d9265ee Page Count : 44EXIF Metadata provided by EXIF.tools