York Heat Pump Yhjd18 Thru 60 Users Manual 571209 YTG C 1012

York Heat Pump YHJD18 thru 60 571209-YTG-C-1012

YHJD18 thru 60 to the manual 76d5c3be-42dc-433f-91fe-d311a3c1e9fc

2015-02-02

: York York-Heat-Pump-Yhjd18-Thru-60-Users-Manual york-york-heat-pump-yhjd18-thru-60-users-manual-455367 york pdf

Open the PDF directly: View PDF PDF.
Page Count: 44

TECHNICAL GUIDE
LX SERIES
SPLIT-SYSTEM HEAT PUMPS
13 SEER – R-410A – 1 PHASE
1.5 THRU 5 NOMINAL TONS
MODELS: YHJD18 THRU 60
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.upgnet.com and www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Standard 5-Years limited parts warranty.
Standard 10-Years limited compressor warranty.
Extended 10-Years limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.
®
571209-YTG-C-1012
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 13 SEER Series unit is the outdoor part of a versatile cli-
mate system. It i76s designed with a matching indoor coil com-
ponent from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with acces-
sories and documents to serve specific functions.
FEATURES
•Small Footprint - The compact footprint is a perfect fit for
any application.
•Quality Condenser Coils - The coil is constructed of copper
tubing and enhanced aluminum fins for increased perfor-
mance.
•Coil Protection - Coils are protected from damage by a slot-
ted, stamped steel coil guard.
•Protected Compressor - Compressors are protected inter-
nally by a high pressure relief valve and a temperature sen-
sor, and externally by the system high pressure switch. A
factory installed liquid line filter-drier further protects the com-
pressor against moisture and debris.
•Environmentally Friendly Refrigerant - The next genera-
tion refrigerant R-410A delivers environmentally friendly per-
formance with zero ozone depletion.
•Durable Finish - The cabinet is made of G90-equivalent pre-
painted steel, with special primer formulas and matte cham-
pagne texture to insure less fading when exposed to sun-
light. The coated steel wire fan guard and pre-treated,
galvanized steel chassis components resist corrosion and
rust creep.
•Lower Installed Cost - Installation time and costs are
reduced by easy power and control wiring connections. The
unit is factory charged for a 15-foot lineset. The small base
dimension means less space is required on the ground or
roof.
•Top Discharge - Warm air from the top mounted fan is blown
up, away from the structure and any landscaping. This allows
compact location on multi-unit applications.
•Low Operating Sound Level - The upward air flow carries
the normal operating noise away from the living area. The
rigid top panel effectively isolates any motor sound. Isolator
mounted compressor and the condenser coil muffle the nor-
mal fan motor and compressor operating sounds.
•Low Maintenance - Long life, permanently lubricated motor-
bearings need no annual servicing.
•Easy Service Access - Fully exposed refrigerant connec-
tions and a single panel covering the electrical controls make
for easy servicing of the unit.
•Secured Service Valves - Secured, re-usable service
valves are provided on both the liquid and vapor sweat con-
nections for ease of evacuating and charging.
•Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.
571209-YTG-C-1012
2Johnson Controls Unitary Products
* Adapter fitting required for 1-1/8" line set.
All dimensions are in inches and are subject to change without notice.
Overall height is from bottom of base pan to top of fan guard.
Overall length and width include screw heads.
Physical and Electrical Data
MODEL YHJD18
S41S2
YHJD24
S41S4
YHJD30
S41S4
YHJD36
S41S4
YHJD42
S41S4
YHJD48
S41S4
YHJD60
S41S5
Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range 1187 to 252
Minimum Circuit Ampacity 11.9 11.2 14.1 19.7 20.9 25.6 42.6
Max. Overcurrent Device Amps 220 15 20 30 35 45 70
Min. Overcurrent Device Amps 315 15 15 20 25 30 45
Compressor Type Scroll Recip Recip Recip Recip Recip Scroll
Compressor Amps Rated Load 9.0 8.3 10.6 14.7 15.7 19.4 33.0
Locked Rotor 48.0 43.0 54.0 74.0 88.0 88.0 134.0
Crankcase Heater No Yes Yes Yes Yes Yes No
Factory External Discharge Muffler Yes No No No No No Yes
Factory External Check Valve No No No No No No No
HS Kit Required with TXV 4No Yes Yes Yes Yes Yes* No
Fan Motor Amps Rated Load 0.70 0.80 0.80 1.3 1.3 1.3 1.5
Fan Diameter Inches 24 24 24 24 24 24 24
Fan Motor
Rated HP 1/10 1/8 1/8 1/4 1/4 1/4 1/4
Nominal RPM 825 1075 1075 850 850 850 850
Nominal CFM 2000 2900 3000 3800 3800 3600 3550
Coil
Face Area Sq. Ft. 15.7 18.3 21.0 23.6 23.6 23.6 23.6
Rows Deep 1 1 1 1 1 2 2
Fins / Inch 22 22 22 22 22 18 18
Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8
Vapor Line Set OD (Field Installed) 3/4 3/4 3/4 3/4 7/8 7/8 1-1/8
Unit Charge (Lbs. - Oz.) 56 - 6 9 - 6 9 - 0 10 - 0 9 - 10 14 - 12 15 - 0
Charge Per Foot, Oz. 0.62 0.62 0.62 0.62 0.67 0.67 .76
Operating Weight Lbs. 172 194 206 218 218 285 290
* These models are shipped with a Hard Start Kit installed at the factory.
1. Rated in accordance with AHRI Standard 110-2012, utilization range “A”.
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
5. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract
the amount of refrigerant, using the difference in length multiplied by the per foot value.
B
C
A
Unit
Model
Dimensions
(Inches) Refrigerant Connection
Service Valve Size
A B C Liquid Vapor
18 28-1/4 34 34
3/8
3/4
24 32-1/4 34 34
30 36-1/4 34 34
36 40-1/4 34 34
42 40-1/4 34 34 7/8
48 40-1/4 34 34
60 40-1/4 34 34 7/8*
571209-YTG-C-1012
Johnson Controls Unitary Products 3
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing.
2. Verify the TXV or orifice and additional charge required for specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit +
charge adder for line set.
System Charge for Various Matched Systems
Outdoor Unit YHJD18S41S2 YHJD24S41S4 YHJD30S41S4 YHJD36S41S4 YHJD42S41S4 YHJD48S41S4 YHJD60S41S5
Required Orifice or TXV 1,2 .051/4F1 .054, .059/4G1 .063/4G1 .071/4H1 .075/4H1 4J1 4K1
Indoor Unit 3,4,5 Additional Charge, Oz
AHE18B .051/ TXV + 0 – – – – – –
AHE24B –.054 / TXV + 0 – – – – –
AHE30B –.054 / TXV + 0 .063 / TXV + 0 – – – –
AHE36C – – .063 / TXV + 25 .071 / TXV + 0 – – –
AHE42D – – – .071 / TXV + 16 – – –
AHE48D – – – – .075 / TXV + 0 TXV + 0 –
AHE60D – – – – – TXV + 25 TXV + 0
AHR18B .051/ TXV + 0 – – – – – –
AHR24B –.054 / TXV + 0 – – – – –
AHR30B – – .063 / TXV + 0 – – – –
AHR36B – – .063 / TXV + 25 .071 / TXV + 6 – – –
AHR42C – – – .071 / TXV + 16 – – –
AHR48D – – – – .075 / TXV + 0 TXV + 0 –
AHR60D – – – – – TXV + 25 TXV + 0
AHV18B .051/ TXV + 0 – – – – – –
AHV24B –.054 / TXV + 0 – – – – –
AHV30B –.054 / TXV + 0 .063 / TXV + 0 – – – –
AHV36C –.059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
AHV42D – – – .071 / TXV + 16 – – –
AHV48D – – – – .075 / TXV + 0 TXV + 0 –
AHV60D – – – – – TXV + 25 TXV + 0
AV*24 .051/ TXV + 3 – – – – – –
AV*36 –.059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
AV*48 – – – – .075 / TXV + 0 TXV + 0 –
AV*60 – – – – .075 / TXV + 0 TXV + 0 –
FC/MC/PC18 .051/ TXV + 0 – – – – – –
FC/MC/PC24 .051/ TXV + 5 – – – – – –
FC/MC/PC30 .051/ TXV + 5 – – – – – –
FC/MC/PC32 –.059 / TXV + 0 .063 / TXV + 0 – – – –
FC/MC/PC35 –.059 / TXV + 0 .063 / TXV + 0 – – – –
FC/MC/PC37 –.059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
FC/MC/PC43 –.059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
FC/MC/PC/UC48 – – – .071 / TXV + 16 – – –
FC/MC/PC/UC60 – – – – .075 / TXV + 0 TXV + 0 –
FC/MC62 – – – – – TXV + 25 TXV + 0
FC64 – – – – – – TXV + 23
UC18 .051/ TXV + 1 – – – – – –
UC24 .051/ TXV + 7 – – – – – –
UC30 .051/ TXV + 7 – – – – – –
UC48 – – – .071 / TXV + 25 – – –
UC60 – – – – .075 / TXV + 2 TXV + 11 –
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:
1. For applications requiring a TXV use S1-1TVM*** series kit.
2. Approved orifice(s) shipped with outdoor unit.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
5. Refer to Cooling and Heating Performance Data tables for actual performance for specified system matches.
571209-YTG-C-1012
4Johnson Controls Unitary Products
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM
NET MBH SEER EER
TOTAL SENS.
13 SEER HP WITH AIR HANDLERS
YHJD18S41S2
AHE18B 17.5 – 610 18.0 14.6 14.00 12.00
AHR18B 17.5 –665 18.0 14.9 13.00 11.00
AHV18B 17.5 –615 18.0 13.2 14.00 12.00
AV*24 17.5 –610 18.0 13.7 14.50 12.00
MV12B 17.5 FC/MC18B 600 18.0 13.7 14.50 12.00
MV12B 17.5 FC/MC24B 600 18.0 13.7 14.50 12.00
MV12B 17.5 FC/MC30B 600 18.0 13.7 14.50 12.00
MX12B 17.5 FC/MC18B 585 18.0 14.5 14.50 12.00
MX12B 17.5 FC/MC24B 645 18.0 15.0 14.50 12.00
MX12B 17.5 FC/MC30B 645 18.0 15.0 14.50 12.00
YHJD24S41S4
AHE24B 17.5 – 795 24.0 17.4 14.50 12.00
AHE30B 17.5 –795 24.0 17.4 14.50 12.00
AHR24B 17.5 –740 24.0 16.9 13.00 11.00
AHV24B 17.5 –710 24.0 17.0 14.00 12.00
AHV30B 17.5 –775 24.0 17.6 14.00 12.00
AHV36C 21.0 –760 24.0 17.8 14.00 12.00
AV*36 21.0 –725 24.0 17.0 14.50 12.00
MV12B 17.5 FC/MC35B 800 24.0 17.5 14.50 12.00
MV12B 17.5 FC/MC43B 800 24.0 17.3 14.50 12.00
MX12B 17.5 FC/MC35B 815 24.0 17.6 14.50 12.00
MX12B 17.5 FC/MC43B 735 24.0 17.1 14.50 12.00
YHJD30S41S4
AHE30B 17.5 – 985 29.2 21.0 14.00 12.00
AHE36C 21.0 –1000 29.8 21.8 14.00 12.00
AHR30B 17.5 –1090 29.2 21.8 13.00 11.00
AHR36B 17.5 –1060 29.6 21.6 13.00 11.00
AHV30B 17.5 –1000 29.6 27.0 13.50 11.50
AHV36C 21.0 –895 29.8 26.6 14.00 12.00
AV*36 21.0 –960 30.0 22.4 14.50 12.00
MV12B 17.5 FC/MC35B 1010 30.0 22.0 14.50 12.00
MV12B 17.5 FC/MC43B 1000 30.0 22.2 14.50 12.00
MV16C 21.0 FC/MC35C 1070 30.0 23.0 14.50 12.00
MV16C 21.0 FC/MC43C 1000 30.0 22.2 14.50 12.00
MX12B 17.5 FC/MC35B 1085 29.6 22.2 14.00 12.00
MX12B 17.5 FC/MC43B 1095 29.4 22.6 14.00 12.00
MX16C 21.0 FC/MC35C 1035 29.6 22.2 14.00 12.00
MX16C 21.0 FC/MC43C 970 29.6 21.6 14.00 12.00
YHJD36S41S4
AHE36C 21.0 – 1190 35.6 25.7 14.50 12.00
AHE42D 24.5 –1180 35.6 25.6 14.50 12.00
AHR36B 21.0 –1245 35.6 26.1 13.00 11.00
AHR42C 21.0 –1230 35.6 25.8 13.00 11.00
AHV36C 21.0 –1215 36.0 27.4 14.00 12.00
AHV42D 24.5 –1180 36.0 27.6 14.50 12.00
AV*36 21.0 –1190 36.0 26.8 14.50 12.00
MV12B 17.5 FC/MC43B 1225 36.0 27.2 14.50 12.00
MV12D 24.5 FC/MC48D 1160 36.0 26.6 14.50 12.00
MV16C 21.0 FC/MC43C 1200 36.0 26.8 14.50 12.00
MV16C 21.0 FC/MC48C 1200 36.0 26.6 14.50 12.00
MX12B 17.5 FC/MC43B 1220 35.6 26.0 14.00 12.00
MX12D 24.5 FC/MC48D 1225 35.6 25.7 14.50 12.00
MX16C 21.0 FC/MC43C 1140 35.6 25.5 14.00 12.00
MX16C 21.0 FC/MC48C 1150 35.6 25.6 14.00 12.00
For Notes See Page 5.
571209-YTG-C-1012
Johnson Controls Unitary Products 5
— = Not applicable.
MA Modular Air Handlers use Coil Only Ratings.
YHJD42S41S4
AHE48D 24.5 – 1385 40.5 33.2 14.00 12.00
AHR48D 24.5 –1320 39.5 29.6 13.00 11.00
AHV48D 24.5 –1300 39.5 30.2 13.75 11.50
AV*48 24.5 –1385 42.0 32.6 14.50 12.00
AV*60 24.5 –1360 42.0 32.6 14.50 12.00
MV16C 21.0 FC60C 1400 40.0 30.0 13.50 11.75
MV20D 24.5 FC/MC60D 1400 42.0 32.4 14.00 12.00
MX16C 21.0 FC60C 1420 41.5 32.2 14.50 12.00
MX20D 24.5 FC/MC60D 1470 41.5 32.2 14.50 12.00
YHJD48S41S4
AHE48D 24.5 – 1635 44.0 33.2 14.00 12.00
AHE60D 24.5 –1565 45.0 34.4 14.50 12.00
AHR48D 24.5 –1610 43.5 32.8 13.00 11.00
AHR60D 24.5 –1620 44.0 33.8 13.25 11.35
AHV48D 24.5 –1585 44.5 33.2 14.50 12.00
AHV60D 24.5 –1570 44.5 34.0 14.50 12.00
AV*48 24.5 –1625 45.0 34.4 14.50 12.00
AV*60 24.5 –1560 45.0 34.6 14.50 12.00
MV16C 21.0 FC60C 1625 44.5 34.2 14.50 12.00
MV20D 24.5 FC/MC60D 1600 44.5 33.8 14.50 12.00
MV20D 24.5 FC/MC62D 1630 45.5 34.4 14.50 12.00
MX16C 21.0 FC60C 1630 45.0 34.4 14.50 12.00
MX20D 24.5 FC/MC60D 1585 45.5 34.6 14.50 12.00
MX20D 24.5 FC/MC62D 1605 45.0 34.4 14.50 12.00
YHJD60S41S5
AHE60D 24.5 – 1950 58.0 41.50 13.00 11.00
AHR60D 24.5 –1835 58.0 41.00 14.00 12.00
AHV60D 24.5 –1635 57.5 39.0 13.75 11.80
MV20D 24.5 FC/MC62D 1855 58.0 41.5 13.75 11.80
MV20D 24.5 FC64D 1855 57.0 43.0 13.25 11.35
MX20D 24.5 FC/MC62D 1795 58.0 41.0 14.00 12.00
MX20D 24.5 FC64D 1795 57.0 42.5 13.75 12.00
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80 °F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 °F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in
watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM
NET MBH SEER EER
TOTAL SENS.
13 SEER HP WITH AIR HANDLERS
571209-YTG-C-1012
6Johnson Controls Unitary Products
MA Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT MODEL
COIL CFM RANGE
(Min.-max.)
COOLING
MODEL WIDTH RATED
CFM
NET MBH SEER1EER
TOTAL SENS.
13 SEER HP COIL ONLY RATINGS
YHJD18S41S2
FC/MC/PC18 14.5,17.5 450 - 750 600 18.0 14.0 13.00 11.00
FC/MC/PC24 14.5,17.5 450 - 750 600 18.0 14.0 13.50 11.00
FC/MC/PC30 14.5,17.5 450 - 750 600 18.0 13.7 13.00 11.00
UC24 14.5,17.5 450 - 750 600 18.0 13.8 13.05 11.00
UC30 14.5,17.5 450 - 750 600 18.0 13.8 13.05 11.00
YHJD24S41S4
FC/MC/PC32 14.5 600 - 1000 800 23.8 17.1 13.00 11.00
FC/MC/PC35 17.5,21.0 600 - 1000 800 23.6 17.1 13.00 11.00
FC/MC/PC37 14.5 600 - 1000 800 24.0 17.3 13.00 11.00
FC/MC/PC43 17.5,21.0 600 - 1000 800 24.0 17.3 13.00 11.00
YHJD30S41S4
FC/MC/PC32 14.5 800 - 1200 1000 29.8 21.8 13.00 11.00
FC/MC/PC35 17.5,21.0 800 - 1200 1000 29.8 21.8 13.00 11.00
FC/MC/PC37 14.5 800 - 1200 1000 30.0 22.2 13.00 11.00
FC/MC/PC43 17.5,21.0 800 - 1200 1000 30.0 22.2 13.00 11.00
YHJD36S41S4
FC/MC/PC37 14.5 1000 - 1400 1200 36.0 26.8 13.00 11.00
FC/MC/PC43 17.5,21.0 1000 - 1400 1200 36.0 26.6 13.00 11.00
FC/MC/PC48 21.0,24.5 1000 - 1400 1200 36.0 26.6 13.00 11.00
UC48 21.0,24.5 1000 - 1400 1200 36.0 26.8 13.00 11.00
YHJD42S41S4 FC/MC/PC60 21.0,24.5 1200 - 1600 1400 41.0 31.8 13.00 11.00
UC60 21.0,24.5 1200 - 1600 1400 40.5 31.0 13.00 11.00
YHJD48S41S4
FC/MC/PC60 21.0,24.5 1400 - 1800 1600 44.0 33.4 13.00 11.00
FC/MC62 24.5 1400 - 1800 1600 44.5 33.8 13.00 11.00
UC60 21.0,24.5 1400 - 1800 1600 44.0 32.8 13.00 11.00
YHJD60S41S5 FC/MC62 24.5 1600 - 2000 1800 57.5 41.0 13.25 11.35
FC64 24.5 1600 - 2000 1800 56.5 42.5 13.00 11.00
1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
COOLING CAPACITY - With High Efficiency Motor Furnaces
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
YHJD18S41S2
T*(8,L)V*A12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
T*(8,L)V*A12 14.5 FC/MC/PC24A 640 18.0 12.7 14.80 12.50
T*(8,L)V*A12 14.5 FC/MC/PC30A 640 18.0 12.7 14.80 12.50
T*(8,L)V*A12 14.5 UC18A 620 18.0 12.4 14.60 12.30
T*(8,L)V*A12 14.5 UC24A 640 18.0 12.8 14.80 12.50
T*(8,L)V*A12 14.5 UC30A 640 18.0 12.8 14.80 12.50
T*(8,L)V*B12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
T*(8,L)V*B12 17.5 FC/MC/PC24B 575 18.0 12.2 14.90 12.60
T*(8,L)V*B12 17.5 FC/MC/PC30B 575 18.0 12.2 14.90 12.60
T*(8,L)V*B12 17.5 UC18B 580 18.0 12.0 14.60 12.30
T*(8,L)V*B12 17.5 UC24B 575 18.0 12.3 14.90 12.60
T*(8,L)V*B12 17.5 UC30B 575 18.0 12.3 15.00 12.60
T*(8,L)X*A12 14.5 FC/MC/PC18A 540 18.0 14.3 14.00 12.00
T*(8,L)X*A12 14.5 FC/MC/PC24A 595 18.0 14.9 14.00 12.00
T*(8,L)X*A12 14.5 FC/MC/PC30A 595 18.0 14.9 14.00 12.00
T*(8,L)X*A12 14.5 UC18B 590 18.0 13.9 14.50 12.00
For Notes See Page 12.
571209-YTG-C-1012
Johnson Controls Unitary Products 7
YHJD18S41S2
T*(8,L)X*A12 14.5 UC24B 570 18.0 14.1 14.50 12.00
T*(8,L)X*A12 14.5 UC30B 570 18.0 14.1 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC18B 580 18.0 14.6 14.00 12.00
T*(8,L)X*B12 17.5 FC/MC/PC24B 620 18.0 14.9 14.00 12.00
T*(8,L)X*B12 17.5 FC/MC/PC30B 620 18.0 14.9 14.00 12.00
T*(8,L)X*B12 17.5 UC18B 595 18.0 13.9 14.50 12.00
T*(8,L)X*B12 17.5 UC24B 575 18.0 14.2 14.50 12.00
T*(8,L)X*B12 17.5 UC30B 575 18.0 14.2 14.50 12.00
T*9V*A10 17.5 FC/MC/PC18A 580 18.0 13.6 14.00 12.00
T*9V*A10 17.5 FC/MC/PC24A 575 18.0 14.0 14.00 12.00
T*9V*A10 17.5 FC/MC/PC30A 575 18.0 14.0 14.00 12.00
T*9(C,V)*B12 17.5 FC/MC/PC18B 610 18.0 12.2 14.60 12.40
T*9(C,V)*B12 17.5 FC/MC/PC24B 610 18.0 12.7 14.90 12.60
T*9(C,V)*B12 17.5 FC/MC/PC30B 610 18.0 12.7 14.90 12.60
T*9(C,V)*B12 17.5 UC18B 610 18.0 12.3 14.80 12.40
T*9(C,V)*B12 17.5 UC24B 610 18.0 12.8 14.90 12.60
T*9(C,V)*B12 17.5 UC30B 610 18.0 12.8 15.00 12.60
T*9X*A10 14.5 FC/MC/PC18A 575 18.3 13.7 14.00 12.00
T*9X*A10 14.5 FC/MC/PC24A 595 18.7 14.1 14.00 12.00
T*9X*A10 14.5 FC/MC/PC30A 595 18.7 14.1 14.00 12.00
T*9X*B12 17.5 FC/MC/PC18B 590 18.0 14.7 14.00 12.00
T*9X*B12 17.5 FC/MC/PC24B 615 18.0 14.9 14.00 12.00
T*9X*B12 17.5 FC/MC/PC30B 615 18.0 14.9 14.00 12.00
T*9X*B12 17.5 UC18B 17 590.0 18.5 13.90 14.50
T*9X*B12 17.5 UC24B 17 615.0 18.9 14.20 14.50
T*9X*B12 17.5 UC30B 17 615.0 18.9 14.20 14.50
Y*(8,L)C*A12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
Y*(8,L)C*A12 14.5 FC/MC/PC24A 640 18.0 12.7 14.80 12.50
Y*(8,L)C*A12 14.5 FC/MC/PC30A 640 18.0 12.7 14.80 12.50
Y*(8,L)C*A12 14.5 UC18A 620 18.0 12.4 14.60 12.30
Y*(8,L)C*A12 14.5 UC24A 640 18.0 12.8 14.80 12.50
Y*(8,L)C*A12 14.5 UC30A 640 18.0 12.8 14.80 12.50
Y*(8,L)C*B12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
Y*(8,L)C*B12 17.5 FC/MC/PC24B 575 18.0 12.2 14.90 12.60
Y*(8,L)C*B12 17.5 FC/MC/PC30B 575 18.0 12.2 14.90 12.60
Y*(8,L)C*B12 17.5 UC18B 580 18.0 12.0 14.60 12.30
Y*(8,L)C*B12 17.5 UC24B 575 18.0 12.3 14.90 12.60
Y*(8,L)C*B12 17.5 UC30B 575 18.0 12.3 15.00 12.60
Y*9C*B12 17.5 FC/MC/PC18B 610 18.0 12.2 14.60 12.40
Y*9C*B12 17.5 FC/MC/PC24B 610 18.0 12.7 14.90 12.60
Y*9C*B12 17.5 FC/MC/PC30B 610 18.0 12.7 14.90 12.60
Y*9C*B12 17.5 UC18B 610 18.0 12.3 14.80 12.40
Y*9C*B12 17.5 UC24B 610 18.0 12.8 14.90 12.60
Y*9C*B12 17.5 UC30B 610 18.0 12.8 15.00 12.60
For Notes See Page 12.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
571209-YTG-C-1012
8Johnson Controls Unitary Products
YHJD24S41S4
T*(8,L)V*A12 14.5 FC/MC/PC32A 775 24.0 17.2 14.00 12.00
T*(8,L)V*A12 14.5 FC/MC/PC37A 805 24.0 17.3 14.50 12.00
T*(8,L)V*B12 17.5 FC/MC/PC35B 760 24.0 17.2 14.00 12.00
T*(8,L)V*B12 17.5 FC/MC/PC43B 760 24.0 17.2 14.00 12.00
T*(8,L)V*C16 21.0 FC/MC/PC35C 855 24.0 17.6 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC43C 895 24.0 18.1 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC35C 740 24.0 17.0 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC43C 760 24.0 17.2 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC32A 800 24.0 17.5 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 840 24.0 17.8 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC35B 850 24.0 17.6 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 865 24.0 18.0 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC35C 865 24.0 17.6 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC43C 855 24.0 17.9 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC35C 885 24.0 17.6 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC43C 815 24.0 17.3 14.50 12.00
T*9V*A10 14.5 FC/MC/PC32A 785 24.0 18.0 13.75 12.00
T*9V*A10 14.5 FC/MC/PC37A 790 24.0 18.4 13.85 12.00
T*9(C,V)*B12 17.5 FC/MC/PC35B 815 24.0 17.6 14.00 12.00
T*9(C,V)*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC35C 900 24.0 18.1 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC43C 810 24.0 17.3 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC35C 755 24.0 17.2 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC43C 890 24.0 18.1 14.50 12.00
T*9X*A10 14.5 FC/MC/PC32A 745 24.0 17.6 13.75 12.00
T*9X*A10 14.5 FC/MC/PC37A 740 24.0 17.7 14.00 12.00
T*9X*B12 17.5 FC/MC/PC35B 785 24.0 17.4 14.50 12.00
T*9X*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00
T*9X*C16 21.0 FC/MC/PC35C 765 24.0 17.3 14.50 12.00
T*9X*C16 21.0 FC/MC/PC43C 785 24.0 17.3 14.50 12.00
T*9X*C20 21.0 FC/MC/PC35C 825 24.0 17.6 14.50 12.00
T*9X*C20 21.0 FC/MC/PC43C 790 24.0 17.3 14.50 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC32A 775 24.0 17.2 14.00 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC37A 805 24.0 17.3 14.50 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC35B 760 24.0 17.2 14.00 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC43B 760 24.0 17.2 14.00 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC35C 855 24.0 17.6 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC43C 895 24.0 18.1 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC35C 740 24.0 17.0 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC43C 760 24.0 17.2 14.50 12.00
Y*9C*B12 17.5 FC/MC/PC35B 815 24.0 17.6 14.00 12.00
Y*9C*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC35C 900 24.0 18.1 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC43C 810 24.0 17.3 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC35C 755 24.0 17.2 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC43C 890 24.0 18.1 14.50 12.00
For Notes See Page 12.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
571209-YTG-C-1012
Johnson Controls Unitary Products 9
YHJD30S41S4
T*(8,L)V*A12 14.5 FC/MC/PC32A 1045 30.0 22.0 13.50 11.00
T*(8,L)V*A12 14.5 FC/MC/PC37A 950 30.0 22.0 14.50 12.00
T*(8,L)V*B12 17.5 FC/MC/PC35B 995 30.0 22.0 14.50 12.00
T*(8,L)V*B12 17.5 FC/MC/PC43B 1040 30.0 22.8 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC35C 1025 30.0 22.0 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC43C 990 30.0 22.2 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC35C 1080 30.0 23.0 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC43C 1000 30.0 22.2 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC32A 970 30.0 22.0 14.00 12.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 1105 30.0 23.2 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC35B 1120 30.0 23.2 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 1125 30.0 23.4 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC35C 1105 30.0 23.2 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC43C 955 30.0 22.2 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC35C 850 29.8 21.4 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC43C 870 30.0 21.6 14.50 12.00
T*9(C,V)*B12 17.5 FC/MC/PC35B 1045 30.0 22.0 14.00 11.50
T*9(C,V)*B12 17.5 FC/MC/PC43B 1035 30.0 22.2 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC35C 1005 30.0 22.0 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC43C 1030 30.0 22.2 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC35C 985 30.0 22.0 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC43C 995 30.0 22.2 14.50 12.00
T*9X*B12 17.5 FC/MC/PC35B 1085 30.0 23.0 14.50 12.00
T*9X*B12 17.5 FC/MC/PC43B 1095 30.0 23.2 14.50 12.00
T*9X*C16 21.0 FC/MC/PC35C 1075 30.0 23.0 14.50 12.00
T*9X*C16 21.0 FC/MC/PC43C 1055 30.0 22.8 14.50 12.00
T*9X*C20 21.0 FC/MC/PC35C 835 29.8 21.2 14.50 12.00
T*9X*C20 21.0 FC/MC/PC43C 720 29.2 19.9 14.50 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC32A 1045 30.0 22.0 13.50 11.00
Y*(8,L)C*A12 14.5 FC/MC/PC37A 950 30.0 22.0 14.50 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC35B 995 30.0 22.0 14.50 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC43B 1040 30.0 22.8 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC35C 1025 30.0 22.0 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC43C 990 30.0 22.2 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC35C 1080 30.0 23.0 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC43C 1000 30.0 22.2 14.50 12.00
Y*9C*B12 17.5 FC/MC/PC35B 1045 30.0 22.0 14.00 11.50
Y*9C*B12 17.5 FC/MC/PC43B 1035 30.0 22.2 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC35C 1005 30.0 22.0 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC43C 1030 30.0 22.2 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC35C 985 30.0 22.0 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC43C 995 30.0 22.2 14.50 12.00
YHJD36S41S4
T*(8,L)V*A12 14.5 FC/MC/PC37A 1150 36.0 26.4 13.75 11.50
T*(8,L)V*B12 17.5 FC/MC/PC43B 1270 36.0 27.2 13.75 11.50
T*(8,L)V*C16 21.0 FC/MC/PC43C 1205 36.0 26.8 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC48C 1210 36.0 26.6 14.50 12.00
T*(8,L)V*C16 21.0 UC48C 1210 36.0 26.8 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC43C 1190 36.0 26.8 14.50 12.00
For Notes See Page 12.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
571209-YTG-C-1012
10 Johnson Controls Unitary Products
YHJD36S41S4
T*(8,L)V*C20 21.0 FC/MC/PC48C 1155 36.0 26.6 14.50 12.00
T*(8,L)V*C20 21.0 UC48C 1155 36.0 26.8 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 1290 36.0 27.6 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 1300 36.0 27.6 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC43C 1175 36.0 26.8 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC48C 1185 36.0 26.6 14.50 12.00
T*(8,L)X*C16 21.0 UC48C 1185 36.0 26.8 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC43C 1250 36.0 27.4 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC48C 1270 36.0 27.2 14.50 12.00
T*(8,L)X*C20 21.0 UC48C 1270 36.0 27.4 14.50 12.00
T*9(C,V)*B12 17.5 FC/MC/PC43B 1200 36.0 26.8 14.00 11.50
T*9(C,V)*C16 21.0 FC/MC/PC43C 1240 36.0 27.0 14.00 12.00
T*9(C,V)*C16 21.0 FC/MC/PC48C 1195 36.0 26.6 14.50 12.00
T*9(C,V)*C16 21.0 UC48C 1195 36.0 26.8 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC43C 1200 36.0 26.8 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC48C 1330 36.0 27.6 14.50 12.00
T*9(C,V)*C20 21.0 UC48C 1330 36.0 27.8 14.50 12.00
T*9(C,V)*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00
T*9(C,V)*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00
T*9X*B12 17.5 FC/MC/PC43B 1270 36.0 27.4 14.50 12.00
T*9X*C16 21.0 FC/MC/PC43C 1260 36.0 27.4 14.50 12.00
T*9X*C16 21.0 FC/MC/PC48C 1280 36.0 27.2 14.50 12.00
T*9X*C16 21.0 UC48C 1280 36.0 27.4 14.50 12.00
T*9X*C20 21.0 FC/MC/PC43C 1185 36.0 26.8 14.50 12.00
T*9X*C20 21.0 FC/MC/PC48C 1205 36.0 26.6 14.50 12.00
T*9X*C20 21.0 UC48C 1205 36.0 26.8 14.50 12.00
T*9X*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00
T*9X*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC37A 1150 36.0 26.4 13.75 11.50
Y*(8,L)C*B12 17.5 FC/MC/PC43B 1270 36.0 27.2 13.75 11.50
Y*(8,L)C*C16 21.0 FC/MC/PC43C 1205 36.0 26.8 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC48C 1210 36.0 26.6 14.50 12.00
Y*(8,L)C*C16 21.0 UC48C 1210 36.0 26.8 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC43C 1190 36.0 26.8 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC48C 1155 36.0 26.6 14.50 12.00
Y*(8,L)C*C20 21.0 UC48C 1155 36.0 26.8 14.50 12.00
Y*9C*B12 17.5 FC/MC/PC43B 1200 36.0 26.8 14.00 11.50
Y*9C*C16 21.0 FC/MC/PC43C 1240 36.0 27.0 14.00 12.00
Y*9C*C16 21.0 FC/MC/PC48C 1195 36.0 26.6 14.50 12.00
Y*9C*C16 21.0 UC48C 1195 36.0 26.8 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC43C 1200 36.0 26.8 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC48C 1330 36.0 27.6 14.50 12.00
Y*9C*C20 21.0 UC48C 1330 36.0 27.8 14.50 12.00
Y*9C*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00
Y*9C*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00
For Notes See Page 12.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
571209-YTG-C-1012
Johnson Controls Unitary Products 11
YHJD42S41S4
T*(8,L)V*C16 21.0 FC/PC60C 1420 41.5 32.2 14.00 12.00
T*(8,L)V*C16 21.0 UC60C 1420 41.0 31.4 13.75 11.50
T*(8,L)V*C20 21.0 FC/PC60C 1410 42.0 32.4 14.00 12.00
T*(8,L)V*C20 21.0 UC60C 1410 41.0 31.4 14.00 12.00
T*(8,L)X*C16 21.0 FC/PC60C 1360 42.0 32.6 14.50 12.00
T*(8,L)X*C16 21.0 UC60C 1400 41.5 31.6 14.00 12.00
T*(8,L)X*C20 21.0 FC/PC60C 1485 42.0 33.4 14.50 12.00
T*(8,L)X*C20 21.0 UC60C 1485 41.5 32.8 14.00 12.00
T*9(C,V)*C16 21.0 FC/PC60C 1445 41.0 32.0 13.25 11.50
T*9(C,V)*C16 21.0 UC60C 1445 40.5 31.0 13.20 11.50
T*9(C,V)*C20 21.0 FC/PC60C 1445 41.5 32.0 13.75 11.50
T*9(C,V)*C20 21.0 UC60C 1445 41.0 31.2 13.50 11.50
T*9(C,V)*D20 24.5 FC/MC/PC60D 1445 41.5 32.2 13.75 11.50
T*9(C,V)*D20 24.5 UC60D 1445 41.0 31.4 13.50 11.50
T*9X*C16 21.0 FC/PC60C 1460 42.0 33.2 14.00 12.00
T*9X*C16 21.0 UC60C 1460 41.0 31.4 13.75 11.50
T*9X*C20 21.0 FC/PC60C 1460 42.0 33.2 14.50 12.00
T*9X*C20 21.0 UC60C 1460 41.5 31.6 14.00 12.00
T*9X*D20 24.5 FC/MC/PC60D 1515 42.0 33.6 14.50 12.00
T*9X*D20 24.5 UC60D 1515 42.0 33.2 14.50 12.00
Y*(8,L)C*C16 21.0 FC/PC60C 1420 41.5 32.2 14.00 12.00
Y*(8,L)C*C16 21.0 UC60C 1420 41.0 31.4 13.75 11.50
Y*(8,L)C*C20 21.0 FC/PC60C 1410 42.0 32.4 14.00 12.00
Y*(8,L)C*C20 21.0 UC60C 1410 41.0 31.4 14.00 12.00
Y*9C*C16 21.0 FC/PC60C 1445 41.0 32.0 13.25 11.50
Y*9C*C16 21.0 UC60C 1445 40.5 31.0 13.20 11.50
Y*9C*C20 21.0 FC/PC60C 1445 41.5 32.0 13.75 11.50
Y*9C*C20 21.0 UC60C 1445 41.0 31.2 13.50 11.50
Y*9C*D20 24.5 FC/MC/PC60D 1445 41.5 32.2 13.75 11.50
Y*9C*D20 24.5 UC60D 1445 41.0 31.4 13.50 11.50
YHJD48S41S4
T*(8,L)V*C16 21.0 FC/MC62D 1635 45.0 34.2 14.50 12.00
T*(8,L)V*C16 21.0 FC/PC60C 1600 44.5 33.6 14.00 12.00
T*(8,L)V*C16 21.0 UC60C 1625 44.0 33.0 14.00 12.00
T*(8,L)V*C20 21.0 FC/MC62D 1615 45.0 34.2 14.50 12.00
T*(8,L)V*C20 21.0 FC/PC60C 1620 44.5 33.8 14.00 12.00
T*(8,L)V*C20 21.0 UC60C 1605 44.5 33.2 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC62D 1610 45.0 34.2 14.50 12.00
T*(8,L)X*C16 21.0 FC/PC60C 1605 44.5 33.8 14.50 12.00
T*(8,L)X*C16 21.0 UC60C 1605 44.5 33.2 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC62D 1665 45.5 34.4 14.50 12.00
T*(8,L)X*C20 21.0 FC/PC60C 1595 44.5 34.0 14.50 12.00
T*(8,L)X*C20 21.0 UC60C 1540 45.0 33.6 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC62D 1590 45.0 34.0 14.00 12.00
T*9(C,V)*C16 21.0 FC/PC60C 1590 44.0 33.6 14.00 12.00
T*9(C,V)*C16 21.0 UC60C 1590 44.0 33.0 14.00 12.00
T*9(C,V)*C20 21.0 FC/MC62D 1655 44.5 33.8 14.00 12.00
T*9(C,V)*C20 21.0 FC/PC60C 1645 44.0 33.6 14.00 12.00
T*9(C,V)*C20 21.0 UC60C 1645 44.0 33.0 13.75 11.50
For Notes See Page 12.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
571209-YTG-C-1012
12 Johnson Controls Unitary Products
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
YHJD48S41S4
T*9(C,V)*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00
T*9(C,V)*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00
T*9(C,V)*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00
T*9X*C16 21.0 FC/MC62D 1550 45.0 34.2 14.50 12.00
T*9X*C16 21.0 FC/PC60C 1575 44.5 33.8 14.50 12.00
T*9X*C16 21.0 UC60C 1575 44.5 33.2 14.50 12.00
T*9X*C20 21.0 FC/MC62D 1595 45.0 34.2 14.50 12.00
T*9X*C20 21.0 FC/PC60C 1625 44.5 34.0 14.50 12.00
T*9X*C20 21.0 UC60C 1625 44.5 33.2 14.50 12.00
T*9X*D20 24.5 FC/MC/PC60D 1490 45.5 33.6 14.50 12.00
T*9X*D20 24.5 FC/MC62D 1610 45.0 34.2 14.50 12.00
T*9X*D20 24.5 UC60D 1490 44.5 32.8 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC62D 1635 45.0 34.2 14.50 12.00
Y*(8,L)C*C16 21.0 FC/PC60C 1600 44.5 33.6 14.00 12.00
Y*(8,L)C*C16 21.0 UC60C 1625 44.0 33.0 14.00 12.00
Y*(8,L)C*C20 21.0 FC/MC62D 1615 45.0 34.2 14.50 12.00
Y*(8,L)C*C20 21.0 FC/PC60C 1620 44.5 33.8 14.00 12.00
Y*(8,L)C*C20 21.0 UC60C 1605 44.5 33.2 14.50 12.00
Y*9C*C16 21.0 FC/MC62D 1590 45.0 34.0 14.00 12.00
Y*9C*C16 21.0 FC/PC60C 1590 44.0 33.6 14.00 12.00
Y*9C*C16 21.0 UC60C 1590 44.0 33.0 14.00 12.00
Y*9C*C20 21.0 FC/MC62D 1655 44.5 33.8 14.00 12.00
Y*9C*C20 21.0 FC/PC60C 1645 44.0 33.6 14.00 12.00
Y*9C*C20 21.0 UC60C 1645 44.0 33.0 13.75 11.50
Y*9C*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00
Y*9C*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00
Y*9C*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00
YHJD60S41S5
T*(8,L)V*C20 21.0 FC/MC62D 1600 57.0 39.5 13.70 11.60
T*(8,L)V*C20 21.0 FC64D 1855 57.0 42.5 13.25 11.40
T*(8,L)X*C20 21.0 FC/MC62D 1665 57.5 40.0 14.00 12.00
T*(8,L)X*C20 21.0 FC64D 1665 56.0 41.0 13.75 11.60
T*9(C,V)*C20 21.0 FC/MC62D 1655 57.0 39.5 13.50 11.60
T*9(C,V)*C20 21.0 FC64D 1630 55.5 40.5 13.25 11.40
T*9(C,V)*D20 24.5 FC/MC62D 1630 57.5 39.5 13.70 11.60
T*9(C,V)*D20 24.5 FC64D 1630 55.5 40.0 13.25 11.40
T*9X*C20 21.0 FC/MC62D 1595 57.5 40.0 14.00 12.00
T*9X*C20 21.0 FC64D 1595 55.5 40.0 13.50 11.40
T*9X*D20 24.5 FC/MC62D 1645 57.5 40.0 14.00 12.00
T*9X*D20 24.5 FC64D 1645 56.0 40.5 13.50 11.40
Y*(8,L)C*C20 21.0 FC/MC62D 1600 57.0 39.5 13.70 11.60
Y*(8,L)C*C20 21.0 FC64D 1855 57.0 42.5 13.25 11.40
Y*9C*C20 21.0 FC/MC62D 1655 57.0 39.5 13.50 11.60
Y*9C*C20 21.0 FC64D 1655 55.5 40.5 13.20 11.30
Y*9C*D20 24.5 FC/MC62D 1630 57.5 39.5 13.70 11.60
Y*9C*D20 24.5 FC64D 1630 55.5 40.0 13.25 11.40
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE COIL
MODEL1
COOLING
MODEL WIDTH RATED
CFM
Net MBH SEER EER
TOTAL SENS.
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2
571209-YTG-C-1012
Johnson Controls Unitary Products 13
HEATING CAPACITY - With Air Handler
UNIT
MODEL AIR
HANDLER COIL1
MODEL
HEATING2
47 F 17 F HSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH AIR HANDLERS
YHJD18S41S2
AHE18B – 18.0 3.70 1.43 11.1 2.28 1.43 7.70
AHR18B –18.0 3.54 1.49 11.4 2.22 1.50 7.70
AHV18B –18.0 3.50 1.51 11.1 2.22 1.46 8.00
AV*24 –18.0 3.66 1.36 9.9 2.78 1.06 8.20
MV12B FC/MC18B 18.0 3.58 1.39 8.6 2.52 1.24 7.95
MV12B FC/MC24B 18.0 3.62 1.36 10.6 2.88 1.03 8.10
MV12B FC/MC30B 18.0 3.62 1.36 10.6 2.88 1.03 8.10
MX12B FC/MC18B 18.0 3.70 1.43 11.0 2.28 1.41 8.20
MX12B FC/MC24B 18.0 3.98 1.33 10.9 2.46 1.30 8.20
MX12B FC/MC30B 18.0 3.98 1.33 10.9 2.46 1.30 8.20
YHJD24S41S4
AHE24B – 23.43.581.9213.32.501.568.20
AHE30B –23.4 3.58 1.92 13.3 2.50 1.56 8.20
AHR24B –23.4 3.40 2.02 13.5 2.40 1.65 7.70
AHV24B –22.6 3.46 1.91 13.2 2.50 1.55 8.00
AHV30B –23.0 3.52 1.91 13.3 2.50 1.56 8.20
AHV36C –23.4 3.64 1.88 13.3 2.56 1.52 8.20
AV*36 –23.2 3.64 1.87 13.3 2.62 1.49 8.20
MV12B FC/MC35B 23.2 3.56 1.91 13.3 2.54 1.53 8.20
MV12B FC/MC43B 23.8 3.66 1.91 13.5 2.60 1.52 8.20
MX12B FC/MC35B 23.2 3.64 1.87 13.0 2.56 1.49 8.20
MX12B FC/MC43B 23.2 3.62 1.88 13.0 2.54 1.50 8.20
YHJD30S41S4
AHE30B – 26.63.402.2915.52.421.887.70
AHE36C –26.8 3.56 2.21 15.3 2.50 1.79 7.70
AHR30B –27.6 3.30 2.45 16.2 2.32 2.05 7.70
AHR36B –27.8 3.36 2.42 16.2 2.32 2.05 7.70
AHV30B –28.0 3.48 2.36 15.5 2.30 1.97 7.70
AHV36C –27.6 3.62 2.23 15.0 2.42 1.82 8.20
AV*36 –27.2 3.66 2.18 15.4 2.54 1.78 8.20
MV12B FC/MC35B 26.8 3.50 2.24 15.4 2.48 1.82 8.00
MV12B FC/MC43B 27.4 3.58 2.24 15.6 2.46 1.86 8.20
MV16C FC/MC35C 27.0 3.56 2.22 15.4 2.50 1.80 8.15
MV16C FC/MC43C 27.4 3.60 2.23 15.5 2.48 1.83 8.20
MX12B FC/MC35B 26.8 3.46 2.27 15.5 2.44 1.86 7.70
MX12B FC/MC43B 27.2 3.56 2.24 15.6 2.48 1.84 7.70
MX16C FC/MC35C 26.4 3.56 2.17 15.2 2.52 1.77 7.70
MX16C FC/MC43C 26.4 3.56 2.17 15.2 2.50 1.78 7.70
YHJD36S41S4
AHE36C – 30.63.442.6121.62.842.238.20
AHE42D –30.6 3.48 2.93 21.4 2.88 2.42 8.20
AHR36B –31.4 3.28 2.80 22.6 2.68 2.47 7.70
AHR42C –31.4 3.32 2.77 22.2 2.70 2.41 7.70
AHV36C –30.8 3.42 2.64 22.0 2.78 2.32 8.00
AHV42D –30.6 3.46 2.59 21.6 2.88 2.20 8.20
AV*36 –33.8 3.60 2.75 21.8 2.80 2.28 8.20
MV12B FC/MC43B 34.2 3.58 2.80 21.8 2.76 2.31 8.20
MV12D FC/MC48D 33.8 3.70 2.68 21.6 2.86 2.21 8.20
MV16C FC/MC43C 33.8 3.60 2.75 21.6 2.78 2.28 8.20
MV16C FC/MC48C 34.0 3.64 2.74 21.8 2.82 2.27 8.20
MX12B FC/MC43B 30.8 3.38 2.67 21.8 2.78 2.30 7.70
MX12D FC/MC48D 30.8 3.48 2.59 21.6 2.84 2.23 8.20
MX16C FC/MC43C 30.2 3.44 2.57 21.0 2.84 2.17 7.70
MX16C FC/MC48C 30.2 3.48 2.54 21.4 2.88 2.18 7.70
For Notes See Page 14.
571209-YTG-C-1012
14 Johnson Controls Unitary Products
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during
the same period.
MA Modular Air Handlers use Coil Only Ratings.
— = Not Applicable.
YHJD42S41S4
AHE48D – 39.03.903.0021.82.642.528.20
AHR48D –40.0 3.66 3.20 22.4 2.48 2.65 7.70
AHV48D –39.5 3.86 3.00 21.0 2.54 2.42 8.20
AV*48 –39.5 3.96 2.92 22.2 2.68 2.43 8.20
AV*60 –39.5 3.98 2.91 22.2 2.70 2.41 8.20
MV16C FC60C 40.0 3.86 3.04 21.4 2.50 2.51 8.20
MV20D FC/MC60D 39.5 3.94 2.94 22.2 2.66 2.45 8.20
MX16C FC60C 40.0 4.08 2.87 22.0 2.66 2.42 8.20
MX20D FC/MC60D 40.0 4.10 2.86 21.8 2.68 2.38 8.20
YHJD48S41S4
AHE48D – 45.53.683.6226.82.842.768.20
AHE60D –44.5 3.72 3.50 26.4 2.90 2.67 8.20
AHR48D –46.0 3.56 3.79 27.4 2.74 2.93 7.70
AHR60D –45.5 3.52 3.79 27.2 2.74 2.91 7.75
AHV48D –44.5 3.56 3.66 26.4 2.78 2.78 8.20
AHV60D –45.0 3.62 3.64 26.8 2.82 2.78 8.20
AV*48 –46.0 3.78 3.57 26.8 2.90 2.71 8.20
AV*60 –45.5 3.80 3.51 26.8 2.94 2.67 8.20
MV16C FC60C 45.0 3.70 3.56 26.6 2.90 2.69 8.20
MV20D FC/MC60D 45.5 3.72 3.58 27.0 2.86 2.77 8.20
MV20D FC/MC62D 45.0 3.72 3.54 26.6 2.90 2.69 8.20
MX16C FC60C 45.0 3.80 3.47 26.2 2.96 2.59 8.20
MX20D FC/MC60D 45.5 3.84 3.47 26.6 2.94 2.65 8.20
MX20D FC/MC62D 45.5 3.80 3.51 26.4 2.94 2.63 8.20
YHJD60S41S5
AHE60D – 58.03.545.0139.02.764.148.20
AHR60D –58.0 3.44 5.28 40.0 2.68 4.37 8.15
AHV60D –58.0 3.42 5.18 39.0 2.68 4.26 8.15
MV20D FC/MC62D 58.0 3.52 5.08 39.0 2.72 4.20 8.20
MV20D FC64D 58.0 3.40 5.34 40.5 2.80 4.24 8.10
MX20D FC/MC62D 58.0 3.58 4.95 38.5 2.76 4.09 8.20
MX20D FC64D 58.03.445.2040.02.864.108.15
1. Rated CFM same as for cooling.
2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and
no supplemental electric heat operation.
HEATING CAPACITY - With Air Handler (Continued)
UNIT
MODEL AIR
HANDLER COIL1
MODEL
HEATING2
47 F 17 FHSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH AIR HANDLERS
571209-YTG-C-1012
Johnson Controls Unitary Products 15
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during
the same period.
MA Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
— = Not Applicable.
HEATING CAPACITY - Upflow, Downflow, and Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT
MODEL COIL1
MODEL
HEATING2
47 F 17 F HSPF
MBH COP KW MBH COP KW STD
13 SEER HP COIL ONLY RATINGS
YHJD18S41S2
FC/MC/PC18 18.0 3.36 1.50 12.7 2.16 1.24 8.20
FC/MC/PC24 18.0 3.36 1.45 10.4 2.60 1.17 8.20
FC/MC/PC30 18.0 3.42 1.54 11.4 2.18 1.53 7.75
UC24 18.0 3.42 1.54 11.4 2.20 1.52 7.75
UC30 18.0 3.42 1.54 11.4 2.20 1.52 7.75
YHJD24S41S4
FC/MC/PC32 24.0 3.36 2.09 13.9 2.38 1.71 7.70
FC/MC/PC35 23.8 3.32 2.10 13.9 2.36 1.73 7.70
FC/MC/PC37 24.0 3.44 2.04 14.1 2.42 1.71 7.70
FC/MC/PC43 24.0 3.44 2.04 14.1 2.42 1.71 7.70
YHJD30S41S4
FC/MC/PC32 27.4 3.28 2.45 16.0 2.30 2.04 7.70
FC/MC/PC35 27.4 3.28 2.45 16.0 2.30 2.04 7.70
FC/MC/PC37 28.0 3.38 2.43 16.1 2.32 2.03 7.70
FC/MC/PC43 28.0 3.38 2.43 16.1 2.32 2.03 7.70
YHJD36S41S4
FC/MC/PC37 34.4 3.42 2.95 22.4 2.62 2.51 7.70
FC/MC/PC43 34.6 3.40 2.98 22.2 2.60 2.50 7.70
FC/MC/PC48 34.8 3.44 2.96 22.6 2.64 2.51 7.70
UC48 35.0 3.52 2.91 22.4 2.62 2.51 7.70
YHJD42S41S4 FC/MC/PC60 40.5 3.72 3.19 23.0 2.50 2.70 7.70
UC60 40.0 3.68 3.18 22.8 2.48 2.69 7.70
YHJD48S41S4
FC/MC/PC60 46.0 3.58 3.76 27.4 2.76 2.91 7.70
FC/MC62 46.0 3.54 3.81 27.4 2.76 2.91 7.70
UC60 46.0 3.56 3.79 27.4 2.74 2.93 7.70
YHJD60S41S5 FC/MC62 58.0 3.44 5.24 39.5 2.66 4.35 7.80
FC64 58.03.365.4940.52.764.307.80
1. Rated CFM same as for cooling.
2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and
no supplemental electric heat operation.
571209-YTG-C-1012
16 Johnson Controls Unitary Products
HEATING CAPACITY - With High Efficiency Motor Furnaces
MODEL FURNACE
MODEL COIL1
MODEL
HEATING2
47 F 17 FHSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
YHJD18S41S2
T*(8,L)V*A12 FC/MC/PC18A 18.0 3.58 1.37 7.7 2.28 0.99 8.00
T*(8,L)V*A12 FC/MC/PC24A 18.0 3.70 1.36 10.6 2.90 1.07 8.30
T*(8,L)V*A12 FC/MC/PC30A 18.0 3.70 1.36 10.6 2.90 1.07 8.30
T*(8,L)V*A12 UC18A 18.0 3.62 1.37 9.1 2.58 1.03 8.10
T*(8,L)V*A12 UC24A 18.0 3.72 1.36 10.7 2.94 1.07 8.30
T*(8,L)V*A12 UC30A 18.0 3.72 1.36 10.7 2.94 1.07 8.30
T*(8,L)V*B12 FC/MC/PC18B 18.0 3.56 1.37 7.7 2.30 0.98 7.90
T*(8,L)V*B12 FC/MC/PC24B 18.0 3.68 1.34 10.1 2.88 1.03 8.20
T*(8,L)V*B12 FC/MC/PC30B 18.0 3.68 1.34 10.1 2.88 1.03 8.20
T*(8,L)V*B12 UC18B 18.0 3.60 1.36 9.7 2.74 1.04 8.00
T*(8,L)V*B12 UC24B 18.0 3.70 1.34 10.5 2.96 1.04 8.20
T*(8,L)V*B12 UC30B 18.0 3.70 1.34 10.4 2.96 1.03 8.20
T*(8,L)X*A12 FC/MC/PC18A 18.0 2.92 1.81 11.1 2.24 1.45 8.10
T*(8,L)X*A12 FC/MC/PC24A 18.0 3.16 1.67 10.9 2.44 1.31 8.20
T*(8,L)X*A12 FC/MC/PC30A 18.0 3.16 1.67 10.9 2.44 1.31 8.20
T*(8,L)X*A12 UC18B 18.0 3.60 1.55 11.1 2.26 1.44 8.20
T*(8,L)X*A12 UC24B 18.0 3.68 1.50 11.1 2.02 1.61 8.15
T*(8,L)X*A12 UC30B 18.0 3.68 1.50 11.1 2.02 1.61 8.15
T*(8,L)X*B12 FC/MC/PC18B 18.0 3.00 1.76 11.0 2.28 1.41 8.15
T*(8,L)X*B12 FC/MC/PC24B 18.0 3.16 1.67 10.9 2.44 1.31 8.20
T*(8,L)X*B12 FC/MC/PC30B 18.0 3.16 1.67 10.9 2.44 1.31 8.20
T*(8,L)X*B12 UC18B 18.0 3.58 1.56 11.1 2.24 1.45 8.20
T*(8,L)X*B12 UC24B 18.0 3.66 1.52 11.0 2.34 1.38 8.10
T*(8,L)X*B12 UC30B 18.0 3.66 1.52 11.0 2.34 1.38 8.10
T*9V*A10 FC/MC/PC18A 18.0 3.44 1.62 11.2 2.18 1.51 7.90
T*9V*A10 FC/MC/PC24A 18.0 3.60 1.55 11.1 2.28 1.43 7.95
T*9V*A10 FC/MC/PC30A 18.0 3.60 1.55 11.1 2.28 1.43 7.95
T*9(C,V)*B12 FC/MC/PC18B 18.0 3.60 1.36 7.7 2.30 0.98 8.00
T*9(C,V)*B12 FC/MC/PC24B 18.0 3.74 1.34 10.5 2.94 1.05 8.30
T*9(C,V)*B12 FC/MC/PC30B 18.0 3.74 1.34 10.5 2.94 1.05 8.30
T*9(C,V)*B12 UC18B 18.0 3.64 1.35 9.1 2.62 1.02 8.10
T*9(C,V)*B12 UC24B 18.0 3.76 1.34 10.7 2.96 1.06 8.30
T*9(C,V)*B12 UC30B 18.0 3.76 1.34 10.7 2.96 1.06 8.30
T*9X*A10 FC/MC/PC18A 18.0 3.46 1.61 11.2 2.18 1.51 7.90
T*9X*A10 FC/MC/PC24A 18.0 3.62 1.55 11.1 2.28 1.43 7.90
T*9X*A10 FC/MC/PC30A 18.0 3.62 1.55 11.1 2.28 1.43 7.90
T*9X*B12 FC/MC/PC18B 18.0 3.00 1.76 11.0 2.30 1.40 8.10
T*9X*B12 FC/MC/PC24B 18.0 3.16 1.67 10.9 2.42 1.32 8.20
T*9X*B12 FC/MC/PC30B 18.0 3.16 1.67 10.9 2.42 1.32 8.20
T*9X*B12 UC18B 18.0 3.60 1.55 11.1 2.26 1.44 8.20
T*9X*B12 UC24B 18.0 3.72 1.49 10.9 2.36 1.35 8.15
T*9X*B12 UC30B 18.0 3.72 1.49 10.9 2.36 1.35 8.15
Y*(8,L)C*A12 FC/MC/PC18A 18.0 3.58 1.37 7.7 2.28 0.99 8.00
Y*(8,L)C*A12 FC/MC/PC24A 18.0 3.70 1.36 10.6 2.90 1.07 8.30
Y*(8,L)C*A12 FC/MC/PC30A 18.0 3.70 1.36 10.6 2.90 1.07 8.30
Y*(8,L)C*A12 UC18A 18.0 3.62 1.37 9.1 2.58 1.03 8.10
Y*(8,L)C*A12 UC24A 18.0 3.72 1.36 10.7 2.94 1.07 8.30
Y*(8,L)C*A12 UC30A 18.0 3.72 1.36 10.7 2.94 1.07 8.30
Y*(8,L)C*B12 FC/MC/PC18B 18.0 3.56 1.37 7.7 2.30 0.98 7.90
Y*(8,L)C*B12 FC/MC/PC24B 18.0 3.68 1.34 10.1 2.88 1.03 8.20
Y*(8,L)C*B12 FC/MC/PC30B 18.0 3.68 1.34 10.1 2.88 1.03 8.20
Y*(8,L)C*B12 UC18B 18.0 3.60 1.36 9.7 2.74 1.04 8.00
For Notes See Page 21.
571209-YTG-C-1012
Johnson Controls Unitary Products 17
YHJD18S41S2
Y*(8,L)C*B12 UC24B 18.0 3.70 1.34 10.5 2.96 1.04 8.20
Y*(8,L)C*B12 UC30B 18.0 3.70 1.34 10.4 2.96 1.03 8.20
Y*9C*B12 FC/MC/PC18B 18.0 3.60 1.36 7.7 2.30 0.98 8.00
Y*9C*B12 FC/MC/PC24B 18.0 3.74 1.34 10.5 2.94 1.05 8.30
Y*9C*B12 FC/MC/PC30B 18.0 3.74 1.34 10.5 2.94 1.05 8.30
Y*9C*B12 UC18B 18.0 3.64 1.35 9.1 2.62 1.02 8.10
Y*9C*B12 UC24B 18.0 3.76 1.34 10.7 2.96 1.06 8.30
Y*9C*B12 UC30B 18.0 3.76 1.34 10.7 2.96 1.06 8.30
YHJD24S41S4
T*(8,L)V*A12 FC/MC/PC32A 23.4 3.52 1.95 13.5 2.52 1.57 8.20
T*(8,L)V*A12 FC/MC/PC37A 23.8 3.62 1.93 13.6 2.54 1.57 8.20
T*(8,L)V*B12 FC/MC/PC35B 23.0 3.50 1.93 13.2 2.52 1.53 8.15
T*(8,L)V*B12 FC/MC/PC43B 23.4 3.60 1.90 13.3 2.54 1.53 8.20
T*(8,L)V*C16 FC/MC/PC35C 23.6 3.62 1.91 13.4 2.58 1.52 8.20
T*(8,L)V*C16 FC/MC/PC43C 24.0 3.74 1.88 13.6 2.60 1.53 8.20
T*(8,L)V*C20 FC/MC/PC35C 22.8 3.54 1.89 13.0 2.56 1.49 8.15
T*(8,L)V*C20 FC/MC/PC43C 23.2 3.64 1.87 13.2 2.58 1.50 8.20
T*(8,L)X*A12 FC/MC/PC32A 23.2 3.64 1.87 13.3 2.60 1.50 8.20
T*(8,L)X*A12 FC/MC/PC37A 23.8 3.78 1.84 13.5 2.66 1.49 8.20
T*(8,L)X*B12 FC/MC/PC35B 23.4 3.68 1.86 13.3 2.62 1.49 8.20
T*(8,L)X*B12 FC/MC/PC43B 23.8 3.78 1.84 13.5 2.66 1.49 8.20
T*(8,L)X*C16 FC/MC/PC35C 23.4 3.68 1.86 13.3 2.62 1.49 8.20
T*(8,L)X*C16 FC/MC/PC43C 23.8 3.76 1.85 13.4 2.64 1.49 8.20
T*(8,L)X*C20 FC/MC/PC35C 23.6 3.62 1.91 13.4 2.58 1.52 8.20
T*(8,L)X*C20 FC/MC/PC43C 23.6 3.70 1.87 13.5 2.62 1.51 8.20
T*9V*A10 FC/MC/PC32A 24.0 3.48 1.99 13.5 2.42 1.63 7.80
T*9V*A10 FC/MC/PC37A 24.0 3.52 1.98 13.8 2.44 1.66 7.90
T*9(C,V)*B12 FC/MC/PC35B 23.6 3.58 1.93 13.6 2.54 1.57 8.20
T*9(C,V)*B12 FC/MC/PC43B 23.8 3.64 1.92 13.6 2.56 1.56 8.20
T*9(C,V)*C16 FC/MC/PC35C 23.8 3.62 1.93 13.6 2.56 1.56 8.20
T*9(C,V)*C16 FC/MC/PC43C 23.8 3.66 1.91 13.5 2.58 1.53 8.20
T*9(C,V)*C20 FC/MC/PC35C 23.0 3.52 1.91 13.1 2.54 1.51 8.15
T*9(C,V)*C20 FC/MC/PC43C 24.0 3.72 1.89 13.7 2.60 1.54 8.20
T*9X*A10 FC/MC/PC32A 24.0 3.44 1.96 13.3 2.44 1.60 7.85
T*9X*A10 FC/MC/PC37A 24.0 3.52 1.95 13.4 2.48 1.58 7.85
T*9X*B12 FC/MC/PC35B 23.0 3.58 1.88 13.2 2.58 1.50 8.20
T*9X*B12 FC/MC/PC43B 23.6 3.72 1.86 13.4 2.64 1.49 8.20
T*9X*C16 FC/MC/PC35C 23.0 3.56 1.89 13.1 2.56 1.50 8.20
T*9X*C16 FC/MC/PC43C 23.6 3.72 1.86 13.4 2.64 1.49 8.20
T*9X*C20 FC/MC/PC35C 23.4 3.66 1.87 13.4 2.60 1.51 8.20
T*9X*C20 FC/MC/PC43C 23.6 3.70 1.87 13.5 2.62 1.51 8.20
Y*(8,L)C*A12 FC/MC/PC32A 23.4 3.52 1.95 13.5 2.52 1.57 8.20
Y*(8,L)C*A12 FC/MC/PC37A 23.8 3.62 1.93 13.6 2.54 1.57 8.20
Y*(8,L)C*B12 FC/MC/PC35B 23.0 3.50 1.93 13.2 2.52 1.53 8.15
Y*(8,L)C*B12 FC/MC/PC43B 23.4 3.60 1.90 13.3 2.54 1.53 8.20
Y*(8,L)C*C16 FC/MC/PC35C 23.6 3.62 1.91 13.4 2.58 1.52 8.20
Y*(8,L)C*C16 FC/MC/PC43C 24.0 3.74 1.88 13.6 2.60 1.53 8.20
Y*(8,L)C*C20 FC/MC/PC35C 22.8 3.54 1.89 13.0 2.56 1.49 8.15
Y*(8,L)C*C20 FC/MC/PC43C 23.2 3.64 1.87 13.2 2.58 1.50 8.20
Y*9C*B12 FC/MC/PC35B 23.6 3.58 1.93 13.6 2.54 1.57 8.20
Y*9C*B12 FC/MC/PC43B 23.8 3.64 1.92 13.6 2.56 1.56 8.20
Y*9C*C16 FC/MC/PC35C 23.8 3.62 1.93 13.6 2.56 1.56 8.20
Y*9C*C16 FC/MC/PC43C 23.8 3.66 1.91 13.5 2.58 1.53 8.20
Y*9C*C20 FC/MC/PC35C 23.0 3.52 1.91 13.1 2.54 1.51 8.15
Y*9C*C20 FC/MC/PC43C 24.0 3.72 1.89 13.7 2.60 1.54 8.20
For Notes See Page 21.
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
MODEL FURNACE
MODEL COIL1
MODEL
HEATING2
47 F 17 F HSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
571209-YTG-C-1012
18 Johnson Controls Unitary Products
YHJD30S41S4
T*(8,L)V*A12 FC/MC/PC32A27.43.302.4316.02.322.027.85
T*(8,L)V*A12 FC/MC/PC37A 27.2 3.48 2.29 15.7 2.42 1.90 8.05
T*(8,L)V*B12 FC/MC/PC35B 27.0 3.42 2.31 15.6 2.42 1.89 7.95
T*(8,L)V*B12 FC/MC/PC43B 27.6 3.52 2.30 15.7 2.42 1.90 8.15
T*(8,L)V*C16 FC/MC/PC35C 26.8 3.48 2.26 15.5 2.44 1.86 8.00
T*(8,L)V*C16 FC/MC/PC43C 27.4 3.60 2.23 15.5 2.50 1.82 8.20
T*(8,L)V*C20 FC/MC/PC35C 27.2 3.50 2.28 15.5 2.44 1.86 8.10
T*(8,L)V*C20 FC/MC/PC43C 27.2 3.62 2.20 15.5 2.50 1.82 8.20
T*(8,L)X*A12 FC/MC/PC32A 27.0 3.42 2.31 15.6 2.40 1.90 7.95
T*(8,L)X*A12 FC/MC/PC37A 27.8 3.64 2.24 15.9 2.50 1.86 8.20
T*(8,L)X*B12 FC/MC/PC35B 27.4 3.52 2.28 15.6 2.44 1.87 8.10
T*(8,L)X*B12 FC/MC/PC43B 27.8 3.62 2.25 15.8 2.48 1.87 8.20
T*(8,L)X*C16 FC/MC/PC35C 27.2 3.56 2.24 15.4 2.46 1.83 8.15
T*(8,L)X*C16 FC/MC/PC43C 27.2 3.64 2.19 15.4 2.52 1.79 8.20
T*(8,L)X*C20 FC/MC/PC35C 26.0 3.40 2.24 14.9 2.44 1.79 7.85
T*(8,L)X*C20 FC/MC/PC43C 26.4 3.52 2.20 15.0 2.48 1.77 8.00
T*9(C,V)*B12 FC/MC/PC35B 27.2 3.36 2.37 15.8 2.36 1.96 7.90
T*9(C,V)*B12 FC/MC/PC43B 27.6 3.48 2.32 15.8 2.40 1.93 8.10
T*9(C,V)*C16 FC/MC/PC35C 26.8 3.46 2.27 15.5 2.44 1.86 8.00
T*9(C,V)*C16 FC/MC/PC43C 27.4 3.54 2.27 15.7 2.44 1.89 8.15
T*9(C,V)*C20 FC/MC/PC35C 26.8 3.46 2.27 15.5 2.44 1.86 8.00
T*9(C,V)*C20 FC/MC/PC43C 27.4 3.58 2.24 15.5 2.48 1.83 8.20
T*9X*B12 FC/MC/PC35B 27.2 3.50 2.28 15.5 2.44 1.86 8.10
T*9X*B12 FC/MC/PC43B 27.6 3.60 2.25 15.7 2.48 1.85 8.20
T*9X*C16 FC/MC/PC35C 27.0 3.52 2.25 15.5 2.46 1.85 8.10
T*9X*C16 FC/MC/PC43C 27.4 3.60 2.23 15.6 2.48 1.84 8.20
T*9X*C20 FC/MC/PC35C 25.8 3.42 2.21 14.7 2.44 1.77 7.80
T*9X*C20 FC/MC/PC43C 25.6 3.34 2.25 14.5 2.40 1.77 7.70
Y*(8,L)C*A12 FC/MC/PC32A 27.4 3.30 2.43 16.0 2.32 2.02 7.85
Y*(8,L)C*A12 FC/MC/PC37A 27.2 3.48 2.29 15.7 2.42 1.90 8.05
Y*(8,L)C*B12 FC/MC/PC35B 27.0 3.42 2.31 15.6 2.42 1.89 7.95
Y*(8,L)C*B12 FC/MC/PC43B 27.6 3.52 2.30 15.7 2.42 1.90 8.15
Y*(8,L)C*C16 FC/MC/PC35C 26.8 3.48 2.26 15.5 2.44 1.86 8.00
Y*(8,L)C*C16 FC/MC/PC43C 27.4 3.60 2.23 15.5 2.50 1.82 8.20
Y*(8,L)C*C20 FC/MC/PC35C 27.2 3.50 2.28 15.5 2.44 1.86 8.10
Y*(8,L)C*C20 FC/MC/PC43C 27.2 3.62 2.20 15.5 2.50 1.82 8.20
Y*9C*B12 FC/MC/PC35B 27.2 3.36 2.37 15.8 2.36 1.96 7.90
Y*9C*B12 FC/MC/PC43B 27.6 3.48 2.32 15.8 2.40 1.93 8.10
Y*9C*C16 FC/MC/PC35C 26.8 3.46 2.27 15.5 2.44 1.86 8.00
Y*9C*C16 FC/MC/PC43C 27.4 3.54 2.27 15.7 2.44 1.89 8.15
Y*9C*C20 FC/MC/PC35C 26.8 3.46 2.27 15.5 2.44 1.86 8.00
Y*9C*C20 FC/MC/PC43C 27.4 3.58 2.24 15.5 2.48 1.83 8.20
YHJD36S41S4
T*(8,L)V*A12 FC/MC/PC37A34.03.462.8822.22.662.458.20
T*(8,L)V*B12 FC/MC/PC43B 34.6 3.48 2.91 22.4 2.66 2.47 8.20
T*(8,L)V*C16 FC/MC/PC43C 34.0 3.56 2.80 21.6 2.74 2.31 8.20
T*(8,L)V*C16 FC/MC/PC48C 34.2 3.62 2.77 21.8 2.78 2.30 8.20
T*(8,L)V*C16 UC48C 34.4 3.72 2.71 21.6 2.78 2.28 8.20
T*(8,L)V*C20 FC/MC/PC43C 33.8 3.58 2.77 21.6 2.76 2.29 8.20
T*(8,L)V*C20 FC/MC/PC48C 34.0 3.66 2.72 21.8 2.82 2.27 8.20
T*(8,L)V*C20 UC48C 34.4 3.74 2.69 21.6 2.80 2.26 8.20
T*(8,L)X*A12 FC/MC/PC37A 34.4 3.62 2.78 22.0 2.76 2.34 8.20
T*(8,L)X*B12 FC/MC/PC43B 34.2 3.60 2.78 22.0 2.76 2.34 8.20
T*(8,L)X*C16 FC/MC/PC43C 33.4 3.64 2.69 21.2 2.82 2.20 8.20
T*(8,L)X*C16 FC/MC/PC48C 33.8 3.70 2.68 21.6 2.86 2.21 8.20
T*(8,L)X*C16 UC48C 34.2 3.80 2.64 21.4 2.86 2.19 8.20
For Notes See Page 21.
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
MODEL FURNACE
MODEL COIL1
MODEL
HEATING2
47 F 17 FHSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
571209-YTG-C-1012
Johnson Controls Unitary Products 19
YHJD36S41S4
T*(8,L)X*C20 FC/MC/PC43C 34.0 3.66 2.72 21.4 2.80 2.24 8.20
T*(8,L)X*C20 FC/MC/PC48C 34.2 3.70 2.71 21.6 2.84 2.23 8.20
T*(8,L)X*C20 UC48C 34.6 3.80 2.67 21.8 2.84 2.25 8.20
T*9(C,V)*B12 FC/MC/PC43B 34.2 3.48 2.88 22.0 2.66 2.42 8.20
T*9(C,V)*C16 FC/MC/PC43C 34.0 3.52 2.83 22.0 2.70 2.39 8.20
T*9(C,V)*C16 FC/MC/PC48C 34.2 3.58 2.80 22.0 2.76 2.34 8.20
T*9(C,V)*C16 UC48C 34.6 3.68 2.75 21.8 2.76 2.31 8.20
T*9(C,V)*C20 FC/MC/PC43C 34.0 3.56 2.80 21.8 2.74 2.33 8.20
T*9(C,V)*C20 FC/MC/PC48C 34.8 3.60 2.83 22.4 2.74 2.40 8.20
T*9(C,V)*C20 UC48C 35.2 3.68 2.80 22.4 2.74 2.40 8.20
T*9(C,V)*D20 FC/MC/PC48D 34.2 3.60 2.78 21.8 2.78 2.30 8.20
T*9(C,V)*D20 UC48D 34.6 3.70 2.74 21.8 2.76 2.31 8.20
T*9X*B12 FC/MC/PC43B 34.2 3.58 2.80 22.0 2.74 2.35 8.20
T*9X*C16 FC/MC/PC43C 34.0 3.60 2.77 21.8 2.76 2.31 8.20
T*9X*C16 FC/MC/PC48C 34.6 3.66 2.77 22.0 2.78 2.32 8.20
T*9X*C16 UC48C 34.8 3.76 2.71 22.0 2.80 2.30 8.20
T*9X*C20 FC/MC/PC43C 33.8 3.58 2.77 21.6 2.76 2.29 8.20
T*9X*C20 FC/MC/PC48C 34.0 3.64 2.74 21.8 2.80 2.28 8.20
T*9X*C20 UC48C 34.4 3.74 2.69 21.6 2.80 2.26 8.20
T*9X*D20 FC/MC/PC48D 34.0 3.66 2.72 21.8 2.82 2.27 8.20
T*9X*D20 UC48D 34.4 3.74 2.69 21.6 2.82 2.24 8.20
Y*(8,L)C*A12 FC/MC/PC37A 34.0 3.46 2.88 22.2 2.66 2.45 8.20
Y*(8,L)C*B12 FC/MC/PC43B 34.6 3.48 2.91 22.4 2.66 2.47 8.20
Y*(8,L)C*C16 FC/MC/PC43C 34.0 3.56 2.80 21.6 2.74 2.31 8.20
Y*(8,L)C*C16 FC/MC/PC48C 34.2 3.62 2.77 21.8 2.78 2.30 8.20
Y*(8,L)C*C16 UC48C 34.4 3.72 2.71 21.6 2.78 2.28 8.20
Y*(8,L)C*C20 FC/MC/PC43C 33.8 3.58 2.77 21.6 2.76 2.29 8.20
Y*(8,L)C*C20 FC/MC/PC48C 34.0 3.66 2.72 21.8 2.82 2.27 8.20
Y*(8,L)C*C20 UC48C 34.4 3.74 2.69 21.6 2.80 2.26 8.20
Y*9C*B12 FC/MC/PC43B 34.2 3.48 2.88 22.0 2.66 2.42 8.20
Y*9C*C16 FC/MC/PC43C 34.0 3.52 2.83 22.0 2.70 2.39 8.20
Y*9C*C16 FC/MC/PC48C 34.2 3.58 2.80 22.0 2.76 2.34 8.20
Y*9C*C16 UC48C 34.6 3.68 2.75 21.8 2.76 2.31 8.20
Y*9C*C20 FC/MC/PC43C 34.0 3.56 2.80 21.8 2.74 2.33 8.20
Y*9C*C20 FC/MC/PC48C 34.8 3.60 2.83 22.4 2.74 2.40 8.20
Y*9C*C20 UC48C 35.2 3.68 2.80 22.4 2.74 2.40 8.20
Y*9C*D20 FC/MC/PC48D 34.2 3.60 2.78 21.8 2.78 2.30 8.20
Y*9C*D20 UC48D 34.6 3.70 2.74 21.8 2.76 2.31 8.20
YHJD42S41S4
T*(8,L)V*C16 FC/PC60C 40.0 3.88 3.02 22.4 2.60 2.52 8.20
T*(8,L)V*C16 UC60C 39.5 3.84 3.01 22.4 2.58 2.54 8.20
T*(8,L)V*C20 FC/PC60C 39.5 3.92 2.95 22.4 2.64 2.49 8.20
T*(8,L)V*C20 UC60C 39.5 3.88 2.98 22.2 2.62 2.48 8.20
T*(8,L)X*C16 FC/PC60C 39.5 3.98 2.91 22.2 2.68 2.43 8.20
T*(8,L)X*C16 UC60C 39.0 3.94 2.90 22.0 2.68 2.41 8.20
T*(8,L)X*C20 FC/PC60C 40.0 4.00 2.93 22.4 2.70 2.43 8.20
T*(8,L)X*C20 UC60C 39.5 3.96 2.92 22.4 2.66 2.47 8.20
T*9(C,V)*C16 FC/PC60C 40.0 3.78 3.10 22.8 2.54 2.63 8.20
T*9(C,V)*C16 UC60C 40.0 3.74 3.13 22.8 2.52 2.65 8.20
T*9(C,V)*C20 FC/PC60C 40.0 3.82 3.07 22.6 2.56 2.59 8.20
T*9(C,V)*C20 UC60C 40.0 3.78 3.10 22.6 2.54 2.61 8.20
T*9(C,V)*D20 FC/MC/PC60D 40.0 3.86 3.04 22.6 2.60 2.55 8.20
T*9(C,V)*D20 UC60D 39.5 3.82 3.03 22.4 2.58 2.54 8.20
T*9X*C16 FC/PC60C 40.0 3.94 2.97 22.6 2.64 2.51 8.20
T*9X*C16 UC60C 39.5 3.86 3.00 22.2 2.60 2.50 8.20
For Notes See Page 21.
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
MODEL FURNACE
MODEL COIL1
MODEL
HEATING2
47 F 17 F HSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
571209-YTG-C-1012
20 Johnson Controls Unitary Products
YHJD42S41S4
T*9X*C20 FC/PC60C 40.03.982.9422.42.682.458.20
T*9X*C20 UC60C 39.5 3.90 2.97 22.2 2.64 2.46 8.20
T*9X*D20 FC/MC/PC60D 40.0 4.04 2.90 22.4 2.72 2.41 8.20
T*9X*D20 UC60D 39.5 4.00 2.89 22.4 2.70 2.43 8.20
Y*(8,L)C*C16 FC/PC60C 40.0 3.88 3.02 22.4 2.60 2.52 8.20
Y*(8,L)C*C16 UC60C 39.5 3.84 3.01 22.4 2.58 2.54 8.20
Y*(8,L)C*C20 FC/PC60C 39.5 3.92 2.95 22.4 2.64 2.49 8.20
Y*(8,L)C*C20 UC60C 39.5 3.88 2.98 22.2 2.62 2.48 8.20
Y*9C*C16 FC/PC60C 40.0 3.78 3.10 22.8 2.54 2.63 8.20
Y*9C*C16 UC60C 40.0 3.74 3.13 22.8 2.52 2.65 8.20
Y*9C*C20 FC/PC60C 40.0 3.82 3.07 22.6 2.56 2.59 8.20
Y*9C*C20 UC60C 40.0 3.78 3.10 22.6 2.54 2.61 8.20
Y*9C*D20 FC/MC/PC60D 40.0 3.86 3.04 22.6 2.60 2.55 8.20
Y*9C*D20 UC60D 39.5 3.82 3.03 22.4 2.58 2.54 8.20
YHJD48S41S4
T*(8,L)V*C16 FC/MC62D 45.53.643.6627.02.842.798.20
T*(8,L)V*C16 FC/PC60C 46.0 3.64 3.70 27.2 2.80 2.85 8.20
T*(8,L)V*C16 UC60C 45.5 3.62 3.68 27.0 2.80 2.83 8.20
T*(8,L)V*C20 FC/MC62D 45.5 3.66 3.64 26.8 2.84 2.76 8.20
T*(8,L)V*C20 FC/PC60C 46.0 3.64 3.70 27.2 2.82 2.83 8.20
T*(8,L)V*C20 UC60C 45.5 3.68 3.62 26.8 2.84 2.76 8.20
T*(8,L)X*C16 FC/MC62D 45.5 3.66 3.64 26.8 2.86 2.75 8.20
T*(8,L)X*C16 FC/PC60C 45.5 3.70 3.60 27.0 2.86 2.77 8.20
T*(8,L)X*C16 UC60C 45.5 3.68 3.62 26.8 2.84 2.76 8.20
T*(8,L)X*C20 FC/MC62D 45.0 3.70 3.56 26.8 2.88 2.73 8.20
T*(8,L)X*C20 FC/PC60C 45.5 3.72 3.58 26.8 2.88 2.73 8.20
T*(8,L)X*C20 UC60C 44.5 3.82 3.41 26.2 2.96 2.59 8.20
T*9(C,V)*C16 FC/MC62D 45.5 3.60 3.70 27.0 2.80 2.83 8.20
T*9(C,V)*C16 FC/PC60C 46.0 3.62 3.72 27.4 2.80 2.87 8.20
T*9(C,V)*C16 UC60C 45.5 3.58 3.72 27.2 2.78 2.87 8.20
T*9(C,V)*C20 FC/MC62D 45.5 3.56 3.74 27.2 2.78 2.87 8.20
T*9(C,V)*C20 FC/PC60C 46.0 3.62 3.72 27.4 2.80 2.87 8.20
T*9(C,V)*C20 UC60C 45.5 3.58 3.72 27.2 2.78 2.87 8.20
T*9(C,V)*D20 FC/MC/PC60D 46.0 3.64 3.70 27.2 2.80 2.85 8.20
T*9(C,V)*D20 FC/MC62D 45.5 3.60 3.70 27.2 2.80 2.85 8.20
T*9(C,V)*D20 UC60D 45.5 3.60 3.70 27.0 2.78 2.85 8.20
T*9X*C16 FC/MC62D 45.5 3.66 3.64 26.8 2.84 2.76 8.20
T*9X*C16 FC/PC60C 45.5 3.70 3.60 27.0 2.86 2.77 8.20
T*9X*C16 UC60C 45.5 3.66 3.64 26.8 2.84 2.76 8.20
T*9X*C20 FC/MC62D 45.0 3.68 3.58 26.8 2.86 2.75 8.20
T*9X*C20 FC/PC60C 45.5 3.74 3.56 26.8 2.88 2.73 8.20
T*9X*C20 UC60C 45.0 3.70 3.56 26.8 2.86 2.75 8.20
T*9X*D20 FC/MC/PC60D 44.5 3.80 3.43 26.2 2.96 2.59 8.20
T*9X*D20 FC/MC62D 45.5 3.64 3.66 27.0 2.84 2.79 8.20
T*9X*D20 UC60D 44.5 3.76 3.47 26.0 2.94 2.59 8.20
Y*(8,L)C*C16 FC/MC62D 45.5 3.64 3.66 27.0 2.84 2.79 8.20
Y*(8,L)C*C16 FC/PC60C 46.0 3.64 3.70 27.2 2.80 2.85 8.20
Y*(8,L)C*C16 UC60C 45.5 3.62 3.68 27.0 2.80 2.83 8.20
Y*(8,L)C*C20 FC/MC62D 45.5 3.66 3.64 26.8 2.84 2.76 8.20
Y*(8,L)C*C20 FC/PC60C 46.0 3.64 3.70 27.2 2.82 2.83 8.20
Y*(8,L)C*C20 UC60C 45.5 3.68 3.62 26.8 2.84 2.76 8.20
Y*9C*C16 FC/MC62D 45.5 3.60 3.70 27.0 2.80 2.83 8.20
Y*9C*C16 FC/PC60C 46.0 3.62 3.72 27.4 2.80 2.87 8.20
Y*9C*C16 UC60C 45.5 3.58 3.72 27.2 2.78 2.87 8.20
For Notes See Page 21.
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
MODEL FURNACE
MODEL COIL1
MODEL
HEATING2
47 F 17 FHSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
571209-YTG-C-1012
Johnson Controls Unitary Products 21
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during
the same period.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
— = Not Applicable.
YHJD48S41S4
Y*9C*C20 FC/MC62D 45.5 3.56 3.74 27.2 2.78 2.87 8.20
Y*9C*C20 FC/PC60C 46.0 3.62 3.72 27.4 2.80 2.87 8.20
Y*9C*C20 UC60C 45.5 3.58 3.72 27.2 2.78 2.87 8.20
Y*9C*D20 FC/MC/PC60D 46.0 3.64 3.70 27.2 2.80 2.85 8.20
Y*9C*D20 FC/MC62D 45.5 3.60 3.70 27.2 2.80 2.85 8.20
Y*9C*D20 UC60D 45.5 3.60 3.70 27.0 2.78 2.85 8.20
YHJD60S41S5
T*(8,L)V*C20 FC/MC62D 58.0 3.38 5.03 39.0 2.66 4.30 8.15
T*(8,L)V*C20 FC64D 58.0 3.36 5.06 41.0 2.78 4.32 8.05
T*(8,L)X*C20 FC/MC62D 58.0 3.44 4.94 38.5 2.70 4.18 8.20
T*(8,L)X*C20 FC64D 58.0 3.36 5.06 39.5 2.82 4.10 8.10
T*9(C,V)*C20 FC/MC62D 58.0 3.36 5.06 39.0 2.64 4.33 8.10
T*9(C,V)*C20 FC64D 58.0 3.30 5.15 40.0 2.76 4.25 8.15
T*9(C,V)*D20 FC/MC62D 58.0 3.38 5.03 39.0 2.66 4.30 8.15
T*9(C,V)*D20 FC64D 58.0 3.30 5.15 40.0 2.76 4.25 8.15
T*9X*C20 FC/MC62D 58.0 3.44 4.94 38.5 2.70 4.18 8.20
T*9X*C20 FC64D 58.0 3.32 5.12 39.5 2.78 4.16 8.20
T*9X*D20 FC/MC62D 58.0 3.42 4.97 38.5 2.68 4.21 8.15
T*9X*D20 FC64D 58.0 3.36 5.06 40.0 2.80 4.19 8.20
Y*(8,L)C*C20 FC/MC62D 58.0 3.38 5.03 39.0 2.66 4.30 8.15
Y*(8,L)C*C20 FC64D 58.0 3.36 5.06 41.0 2.78 4.32 8.05
Y*9C*C20 FC/MC62D 58.0 3.36 5.06 39.0 2.64 4.33 8.10
Y*9C*C20 FC64D 58.0 3.30 5.15 40.5 2.74 4.33 8.10
Y*9C*D20 FC/MC62D 58.0 3.38 5.03 39.0 2.66 4.30 8.15
Y*9C*D20 FC64D 58.0 3.30 5.15 40.0 2.76 4.25 8.15
1. Rated CFM same as for cooling.
2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and
no supplemental electric heat operation.
3. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
MODEL FURNACE
MODEL COIL1
MODEL
HEATING2
47 F 17 F HSPF
MBH COP KW MBH COP KW STD
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3
571209-YTG-C-1012
22 Johnson Controls Unitary Products
ACCESSORIES
Refer to Price Manual for specific model numbers.
Start Assist Kit (S1-2SA067*) - May be required on 24, 30, 36,
& 42 models when a TXV is installed. May also be required on
18 & 60 models in low voltage application. The 48 model has
factory installed start assist. See Hard Start Kit Accessory
Installation Manual for Hard Start Kit part number for each
model.
Blower Time Delay - Available to increase efficiency when
installed. Installs on indoor section and maintains blower for
approximately one minute after cooling thermostat has been
satisfied.
Low Temperature Cutout (S1-2LT06700224) - Prevents heat
pump operation below -1°F ambient temperature.
Compressor Blanket - Designed to further reduce the normal
operating sound.
TXV Kits - S1-1TVM series thermal expansion valves precisely
meter refrigerant for optimum performance over a wide range of
conditions. See System Charge table for TXV part number for
each model.
Outdoor Thermostat (S1-2TD06700124) - Provides additional
staging of supplemental electric heat.
Thermostats - Compatible thermostat controls are available
through accessory sourcing. For optimum performance and
installation, refer to the UPGNET “Low Voltage Wiring Diagram”
document to select and apply controls.
SOUND POWER LEVEL - TYPICAL OCTAVE BAND SPECTRUM (without tone adjustment)
Rated in accordance with ARI Standard 270.
Size Test Condition 63 125 250 500 1000 2000 4000 8000 dBA SQI
18 Cooling Mode 67 71 66 69 65 59 58 55 70 19.2
Heating Mode 68 70 66 68 67 61 60 57 71 19.2
24 Cooling Mode 68 70 67 69 72 65 66 62 75 19.0
Heating Mode 69 69 63 67 67 64 65 62 72 19.1
30 Cooling Mode 73 70 69 71 72 66 69 63 76 19.2
Heating Mode 71 73 69 71 73 68 65 62 76 19.1
36 Cooling Mode 72 73 71 72 73 67 66 63 76 19.0
Heating Mode 70 72 69 70 71 69 65 64 75 19.2
42 Cooling Mode 71 71 73 73 72 67 67 64 77 19.1
Heating Mode 71 71 71 72 72 69 69 65 77 19.1
48 Cooling Mode 72 71 68 69 66 62 57 53 71 19.1
Heating Mode 71 73 70 72 70 68 65 63 75 19.1
60 Cooling Mode 69 69 69 70 70 65 64 63 74 19.2
Heating Mode 68 69 68 69 71 65 63 62 74 19.0
571209-YTG-C-1012
Johnson Controls Unitary Products 23
TYPICAL INSTALLATION
TYPICAL FIELD WIRING
60” OVERHEAD
CLEARANCE
MINIMUM 18” SERVICE
ACCESS CLEARANCE
ON ONE SIDE
WEATHERPROOF
DISCONNECT
SWITCH
THERMOSTAT
10” CLEARANCE
AROUND PERIMETER
CONTROL
ACCESS
PANEL
TO INDOOR COIL
NEC CLASS 1 WIRING
NEC CLASS 2 WIRING
TO FURNACE OR
AIR HANDLER
TERMINAL BLOCK
SEAL OPENING(S) WITH
PERMAGUM OR EQUIVALENT
NOTES:
ALL OUTDOOR WIRING MUST BE WEATHERPROOF.
MINIMUM 24” UNIT TO UNIT CLEARANCE.
571209-YTG-C-1012
24 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Continued on next page.
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJD18S41S2
INDOOR COIL MODEL NO. FC35
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 450 600 750
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 16.8 18.5 18.8 20.3 21.7 18.9 19.4 19.9 21.3 22.3 21.0 20.3 20.9 22.2 22.9
S.C. 16.8 15.4 13.3 13.2 11.1 18.9 18.2 15.6 15.1 12.0 21.0 20.3 17.8 17.0 12.9
KW 1.00 1.00 1.00 1.00 1.00 1.10 1.10 1.10 1.10 1.10 1.20 1.20 1.20 1.20 1.20
75
T.C. 16.0 17.6 17.6 19.4 20.9 18.0 18.5 18.7 20.3 21.6 20.0 19.5 19.7 21.2 22.2
S.C. 16.0 14.9 12.8 12.8 10.6 18.0 17.6 15.0 14.7 11.6 20.0 19.5 17.3 16.7 12.6
KW 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.30 1.30 1.30 1.30 1.30
85
T.C. 15.2 16.6 16.5 18.5 20.1 17.1 17.7 17.5 19.4 20.8 19.0 18.8 18.5 20.2 21.5
S.C. 15.2 14.4 12.2 12.4 10.2 17.1 17.0 14.5 14.4 11.2 19.0 18.8 16.7 16.4 12.3
KW 1.30 1.30 1.30 1.30 1.30 1.40 1.40 1.40 1.40 1.40 1.50 1.50 1.50 1.50 1.50
95
T.C. 14.4 15.6 15.3 17.7 19.3 16.2 16.8 16.3 18.5 20.1 18.0 18.0 17.3 19.2 20.8
S.C. 14.4 13.9 11.7 11.9 9.7 16.2 16.3 13.9 14.0 10.8 18.0 18.0 16.2 16.1 11.9
KW 1.40 1.40 1.40 1.40 1.50 1.50 1.50 1.50 1.50 1.50 1.60 1.60 1.60 1.60 1.60
105
T.C. 13.5 14.2 14.1 16.2 18.0 15.2 15.6 15.0 17.0 18.7 16.9 16.9 15.8 17.8 19.4
S.C. 13.5 13.3 11.1 11.3 9.1 15.2 15.4 13.3 13.4 10.3 16.9 16.9 15.5 15.5 11.5
KW 1.60 1.60 1.60 1.60 1.60 1.70 1.70 1.70 1.70 1.70 1.80 1.80 1.70 1.80 1.80
115
T.C. 12.5 12.8 12.8 14.8 16.7 14.2 14.3 13.6 15.6 17.4 15.9 15.9 14.4 16.3 18.0
S.C. 12.5 12.6 10.5 10.7 8.6 14.2 14.3 12.7 12.8 9.8 15.9 15.9 14.4 14.9 11.0
KW 1.70 1.70 1.70 1.80 1.80 1.80 1.80 1.80 1.80 1.90 1.90 1.90 1.90 1.90 2.00
125
T.C. 11.511.411.613.415.513.213.112.214.116.014.814.812.914.916.6
S.C. 11.5 11.4 9.9 10.0 8.0 13.2 13.1 12.1 12.2 9.3 14.8 14.8 12.9 14.4 10.6
KW 1.90 1.90 1.90 1.90 2.00 2.00 2.00 2.00 2.00 2.00 2.10 2.10 2.10 2.10 2.10
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils T.C. S.C. KW
–FC/MC/PC18 0.97 0.96 1.02
–FC/MC/PC24 0.99 0.98 1.02
–FC/MC/PC30 0.99 0.98 1.02
–UC24 0.99 0.99 1.02
–UC30 0.99 0.99 1.02
AHE18B – 0.99 1.00 0.93
AHR18B – 0.98 1.01 1.01
AHV18B – 0.99 1.00 0.93
AV*24 – 1.01 1.01 0.92
MV12B FC/MC/PC18B 0.99 0.99 0.92
MV12B FC/MC24B 1.01 1.01 0.94
MV12B FC/MC30B 1.01 1.01 0.94
MX12B FC/MC/PC18B 0.99 0.99 0.91
MX12B FC/MC24B 1.03 1.06 0.91
MX12B FC/MC30B 1.03 1.06 0.91
571209-YTG-C-1012
Johnson Controls Unitary Products 25
Furnaces Coils T.C. S.C. KW
T*(8,L)V*A12 FC/MC/PC18A 0.99 0.98 0.93
T*(8,L)V*A12 FC/MC/PC24A 1.02 1.06 0.93
T*(8,L)V*A12 FC/MC/PC30A 1.02 1.06 0.93
T*(8,L)V*A12 UC18A 0.99 0.99 0.93
T*(8,L)V*A12 UC24A 1.02 1.05 0.93
T*(8,L)V*A12 UC30A 1.02 1.05 0.93
T*(8,L)V*B12 FC/MC/PC18B 0.99 0.98 0.92
T*(8,L)V*B12 FC/MC/PC24B 1.01 1.01 0.93
T*(8,L)V*B12 FC/MC/PC30B 1.01 1.01 0.93
T*(8,L)V*B12 UC18B 1.00 0.99 0.92
T*(8,L)V*B12 UC24B 1.02 1.01 0.91
T*(8,L)V*B12 UC30B 1.02 1.01 0.91
T*(8,L)X*A12 FC/MC/PC18A 0.98 0.95 0.91
T*(8,L)X*A12 FC/MC/PC24A 1.02 1.01 0.90
T*(8,L)X*A12 FC/MC/PC30A 1.02 1.01 0.90
T*(8,L)X*A12 UC18A 1.00 0.99 0.91
T*(8,L)X*A12 UC24A 1.01 1.01 0.91
T*(8,L)X*A12 UC30A 1.01 1.01 0.91
T*(8,L)X*B12 FC/MC/PC18B 0.99 0.99 0.91
T*(8,L)X*B12 FC/MC/PC24B 1.02 1.01 0.90
T*(8,L)X*B12 FC/MC/PC30B 1.02 1.01 0.90
T*(8,L)X*B12 UC18B 1.00 0.99 0.91
T*(8,L)X*B12 UC24B 1.02 1.01 0.91
T*(8,L)X*B12 UC30B 1.02 1.01 0.91
T*9V*A10 FC/MC/PC18A 0.98 0.97 0.94
T*9V*A10 FC/MC/PC24A 1.01 1.00 0.94
T*9V*A10 FC/MC/PC30A 1.01 1.00 0.94
T*9(C,V)*B12 FC/MC/PC18B 0.99 0.98 0.92
T*9(C,V)*B12 FC/MC/PC24B 1.01 1.01 0.92
T*9(C,V)*B12 FC/MC/PC30B 1.01 1.01 0.92
T*9(C,V)*B12 UC18B 1.00 0.99 0.92
T*9(C,V)*B12 UC24B 1.02 1.01 0.92
T*9(C,V)*B12 UC30B 1.02 1.01 0.92
T*9X*A10 FC/MC/PC18A 0.99 0.98 0.94
T*9X*A10 FC/MC/PC24A 1.01 1.01 0.94
T*9X*A10 FC/MC/PC30A 1.01 1.01 0.94
T*9X*B12 FC/MC/PC18B 0.99 0.99 0.91
T*9X*B12 FC/MC/PC24B 1.02 1.01 0.91
T*9X*B12 FC/MC/PC30B 1.02 1.01 0.91
T*9X*B12 UC18B 1.00 0.99 0.91
T*9X*B12 UC24B 1.02 1.01 0.91
T*9X*B12 UC30B 1.02 1.01 0.91
Y*(8,L)C*A12 FC/MC/PC18A 0.99 0.98 0.93
Y*(8,L)C*A12 FC/MC/PC24A 1.02 1.06 0.93
Y*(8,L)C*A12 FC/MC/PC30A 1.02 1.06 0.93
Y*(8,L)C*A12 UC18A 0.99 0.99 0.93
Y*(8,L)C*A12 UC24A 1.02 1.05 0.93
Y*(8,L)C*A12 UC30A 1.02 1.05 0.93
Y*(8,L)C*B12 FC/MC/PC18B 0.99 0.98 0.92
Y*(8,L)C*B12 FC/MC/PC24B 1.01 1.01 0.93
Y*(8,L)C*B12 FC/MC/PC30B 1.01 1.01 0.93
Y*(8,L)C*B12 UC18B 1.00 0.99 0.92
Y*(8,L)C*B12 UC24B 1.02 1.01 0.91
Y*(8,L)C*B12 UC30B 1.02 1.01 0.91
Y*9C*B12 FC/MC/PC18B 0.99 0.98 0.92
Y*9C*B12 FC/MC/PC24B 1.01 1.01 0.92
Y*9C*B12 FC/MC/PC30B 1.01 1.01 0.92
Y*9C*B12 UC18B 1.00 0.99 0.92
Y*9C*B12 UC24B 1.02 1.01 0.92
Y*9C*B12 UC30B 1.02 1.01 0.92
Furnaces Coils T.C. S.C. KW
571209-YTG-C-1012
26 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Continued on next page.
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJD24S41S4
INDOOR COIL MODEL NO. AHP30
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 600 800 1000
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 22.6 25.9 25.9 28.3 29.4 25.2 27.1 26.8 29.2 30.4 27.9 28.3 27.6 30.0 31.4
S.C. 22.6 20.9 18.1 18.1 15.5 25.2 23.9 19.7 19.5 16.1 27.9 26.9 21.3 20.9 16.6
KW 1.60 1.60 1.60 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.80 1.80 1.80 1.80 1.80
75
T.C. 21.5 24.1 24.2 26.6 28.1 23.9 25.3 25.1 27.5 29.0 26.3 26.4 26.0 28.5 29.9
S.C. 21.5 20.1 17.3 17.3 14.7 23.9 22.8 19.1 18.9 15.4 26.3 25.6 20.9 20.6 16.1
KW 1.70 1.80 1.80 1.80 1.80 1.80 1.90 1.80 1.90 1.90 1.90 1.90 1.90 2.00 2.00
85
T.C. 20.4 22.3 22.4 24.8 26.8 22.6 23.4 23.4 25.9 27.6 24.7 24.5 24.4 26.9 28.4
S.C. 20.4 19.4 16.5 16.4 13.8 22.6 21.8 18.6 18.4 14.7 24.7 24.3 20.6 20.3 15.6
KW 1.90 1.90 1.90 1.90 1.90 2.00 2.00 2.00 2.00 2.00 2.10 2.10 2.10 2.10 2.10
95
T.C. 19.4 20.6 20.6 23.0 25.5 21.2 21.6 21.7 24.2 26.2 23.1 22.6 22.7 25.4 26.9
S.C. 19.4 18.6 15.7 15.6 13.0 21.2 20.8 18.0 17.8 14.0 23.1 22.6 20.2 20.0 15.1
KW 2.00 2.00 2.00 2.00 2.10 2.10 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.30 2.30
105
T.C. 17.6 18.0 18.0 20.9 23.5 19.4 19.5 18.9 21.9 24.3 21.3 21.0 19.9 23.0 25.1
S.C. 17.6 17.2 14.5 14.7 12.0 19.4 19.3 16.7 16.9 13.2 21.3 21.0 18.8 19.1 14.4
KW 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.30 2.30 2.40 2.40
115
T.C. 15.8 15.5 15.4 18.8 21.5 17.6 17.5 16.2 19.7 22.4 19.5 19.5 17.0 20.6 23.3
S.C. 15.8 15.5 13.3 13.9 11.1 17.6 17.5 15.3 16.0 12.4 19.5 19.5 17.0 18.2 13.7
KW 2.20 2.20 2.20 2.30 2.40 2.30 2.30 2.30 2.40 2.50 2.50 2.50 2.40 2.50 2.60
125
T.C. 13.9 13.0 12.7 16.6 19.5 15.8 15.5 13.4 17.4 20.5 17.7 17.9 14.1 18.2 21.5
S.C. 13.9 13.0 12.1 13.0 10.1 15.8 15.5 13.4 15.2 11.5 17.7 17.9 14.1 17.3 13.0
KW 2.30 2.20 2.20 2.40 2.50 2.40 2.40 2.40 2.50 2.60 2.60 2.60 2.50 2.60 2.70
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils T.C. S.C. KW
–FC/MC/PC32 1.02 1.00 1.02
–FC/MC/PC35 1.02 1.00 1.02
–FC/MC/PC37 1.03 1.02 1.02
–FC/MC/PC43 1.03 1.02 1.02
AHE24B – 1.03 1.02 0.94
AHE30B – 1.03 1.02 0.94
AHR24B – 1.02 0.98 0.98
AHV24B – 1.02 0.97 0.93
AHV30B – 1.02 1.01 0.94
AHV36C – 1.03 1.02 0.93
AV*36 – 1.02 1.00 0.92
MV12B FC/MC35B 1.05 1.03 0.94
MV12B FC/MC43B 1.06 1.04 0.94
MX12B FC/MC35B 1.06 1.03 0.92
MX12B FC/MC43B 1.02 1.01 0.92
571209-YTG-C-1012
Johnson Controls Unitary Products 27
Furnaces Coils T.C. S.C. KW
T*(8,L)V*A12 FC/MC/PC32A 1.02 0.99 0.94
T*(8,L)V*A12 FC/MC/PC37A 1.06 1.04 0.94
T*(8,L)V*B12 FC/MC/PC35B 1.05 1.02 0.94
T*(8,L)V*B12 FC/MC/PC43B 1.06 1.04 0.94
T*(8,L)V*C16 FC/MC/PC35C 1.05 1.03 0.93
T*(8,L)V*C16 FC/MC/PC43C 1.07 1.04 0.93
T*(8,L)V*C20 FC/MC/PC35C 1.02 1.00 0.93
T*(8,L)V*C20 FC/MC/PC43C 1.02 1.01 0.92
T*(8,L)X*A12 FC/MC/PC32A 1.05 1.03 0.92
T*(8,L)X*A12 FC/MC/PC37A 1.07 1.09 0.92
T*(8,L)X*B12 FC/MC/PC35B 1.05 1.06 0.92
T*(8,L)X*B12 FC/MC/PC43B 1.07 1.10 0.93
T*(8,L)X*C16 FC/MC/PC35C 1.05 1.07 0.92
T*(8,L)X*C16 FC/MC/PC43C 1.08 1.10 0.93
T*(8,L)X*C20 FC/MC/PC35C 1.07 1.09 0.95
T*(8,L)X*C20 FC/MC/PC43C 1.07 1.04 0.93
T*9V*A10 FC/MC/PC32A 1.03 1.01 0.98
T*9V*A10 FC/MC/PC37A 1.05 1.03 0.99
T*9(C,V)*B12 FC/MC/PC35B 1.04 1.02 0.95
T*9(C,V)*B12 FC/MC/PC43B 1.06 1.04 0.95
T*9(C,V)*C16 FC/MC/PC35C 1.05 1.08 0.95
T*9(C,V)*C16 FC/MC/PC43C 1.06 1.04 0.94
T*9(C,V)*C20 FC/MC/PC35C 1.02 1.00 0.93
T*9(C,V)*C20 FC/MC/PC43C 1.07 1.11 0.96
T*9X*A10 FC/MC/PC32A 1.02 0.99 0.96
T*9X*A10 FC/MC/PC37A 1.02 0.99 0.96
T*9X*B12 FC/MC/PC35B 1.05 1.03 0.92
T*9X*B12 FC/MC/PC43B 1.07 1.05 0.93
T*9X*C16 FC/MC/PC35C 1.05 1.03 0.92
T*9X*C16 FC/MC/PC43C 1.07 1.05 0.92
T*9X*C20 FC/MC/PC35C 1.05 1.03 0.93
T*9X*C20 FC/MC/PC43C 1.07 1.04 0.94
Y*(8,L)C*A12 FC/MC/PC32A 1.02 0.99 0.94
Y*(8,L)C*A12 FC/MC/PC37A 1.06 1.04 0.94
Y*(8,L)C*B12 FC/MC/PC35B 1.05 1.02 0.94
Y*(8,L)C*B12 FC/MC/PC43B 1.06 1.04 0.94
Y*(8,L)C*C16 FC/MC/PC35C 1.05 1.03 0.93
Y*(8,L)C*C16 FC/MC/PC43C 1.07 1.04 0.93
Y*(8,L)C*C20 FC/MC/PC35C 1.02 1.00 0.93
Y*(8,L)C*C20 FC/MC/PC43C 1.02 1.01 0.92
Y*9C*B12 FC/MC/PC35B 1.04 1.02 0.95
Y*9C*B12 FC/MC/PC43B 1.06 1.04 0.95
Y*9C*C16 FC/MC/PC35C 1.05 1.08 0.95
Y*9C*C16 FC/MC/PC43C 1.06 1.04 0.94
Y*9C*C20 FC/MC/PC35C 1.02 1.00 0.93
Y*9C*C20 FC/MC/PC43C 1.07 1.11 0.96
Furnaces Coils T.C. S.C. KW
571209-YTG-C-1012
28 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Continued on next page.
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJD30S41S4
INDOOR COIL MODEL NO. AHP30
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 800 1000 1200
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 29.1 31.3 31.4 34.3 36.1 31.0 32.7 32.8 35.2 36.6 33.0 34.1 34.1 36.1 37.2
S.C. 28.0 24.7 21.2 21.0 17.8 29.9 27.9 23.3 22.4 18.2 31.8 31.1 25.4 23.8 18.6
KW 2.00 2.00 2.00 2.10 2.00 2.10 2.10 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.20
75
T.C. 27.4 29.1 29.2 32.3 34.3 29.3 30.4 30.4 33.2 34.9 31.3 31.6 31.6 34.0 35.5
S.C. 26.4 23.7 20.2 20.1 16.8 28.3 26.5 22.3 21.7 17.4 30.2 29.3 24.4 23.3 18.0
KW 2.10 2.20 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.30 2.30 2.40 2.30 2.30 2.30
85
T.C. 25.7 26.9 27.0 30.3 32.5 27.6 28.0 28.0 31.1 33.2 29.6 29.1 29.1 31.9 33.9
S.C. 24.8 22.7 19.2 19.3 15.8 26.6 25.1 21.3 21.0 16.6 28.5 27.5 23.3 22.7 17.3
KW 2.20 2.30 2.30 2.30 2.40 2.40 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 2.50
95
T.C. 24.0 24.7 24.7 28.2 30.8 25.9 25.7 25.7 29.1 31.5 27.8 26.7 26.6 29.9 32.2
S.C. 23.1 21.8 18.2 18.4 14.8 25.0 23.7 20.2 20.3 15.8 26.8 25.7 22.3 22.1 16.7
KW 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 2.60 2.60 2.60 2.60 2.60 2.70 2.70
105
T.C. 21.8 22.2 21.8 25.3 28.3 23.6 23.5 22.6 26.1 29.0 25.4 24.8 23.4 26.9 29.7
S.C. 21.0 20.4 17.0 17.3 13.8 22.8 22.2 18.9 19.2 14.8 24.5 24.0 20.9 21.1 15.8
KW 2.50 2.50 2.50 2.60 2.70 2.70 2.70 2.60 2.70 2.80 2.80 2.80 2.70 2.80 2.90
115
T.C. 19.7 19.6 19.0 22.3 25.8 21.4 21.3 19.6 23.2 26.5 23.0 23.0 20.2 24.0 27.1
S.C. 19.0 18.9 15.8 16.1 12.7 20.6 20.6 17.6 18.0 13.8 22.2 22.2 19.5 20.0 14.9
KW 2.70 2.70 2.70 2.70 2.80 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 3.00 3.10
125
T.C. 17.5 17.1 16.1 19.4 23.4 19.1 19.1 16.5 20.3 24.0 20.7 21.2 16.9 21.1 24.6
S.C. 16.9 17.1 14.6 14.9 11.7 18.4 19.0 16.3 16.9 12.8 19.9 20.4 16.9 18.9 13.9
KW 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 3.00 3.10 3.10 3.10 3.00 3.10 3.30
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils T.C. S.C. KW
–FC/MC/PC32 1.00 1.05 1.00
–FC/MC/PC35 1.00 1.05 1.00
–FC/MC/PC37 1.02 1.07 1.00
–FC/MC/PC43 1.02 1.07 1.00
AHE30B – 1.02 1.06 0.94
AHE36C – 1.04 1.11 0.92
AHR30B – 1.02 1.11 1.01
AHR36B – 1.03 1.10 1.01
AHV30B – 1.02 1.07 0.96
AHV36C – 1.02 1.05 0.91
AV*36 – 1.04 1.09 0.91
MV12B FC/MC35B 1.02 1.07 0.92
MV12B FC/MC43B 1.04 1.09 0.93
MV16C FC/MC35C 1.04 1.12 0.92
MV16C FC/MC43C 1.04 1.09 0.93
MX12B FC/MC35B 1.03 1.12 0.93
MX12B FC/MC43B 1.05 1.15 0.94
MX16C FC/MC35C 1.03 1.08 0.90
MX16C FC/MC43C 1.05 1.10 0.91
571209-YTG-C-1012
Johnson Controls Unitary Products 29
Furnaces Coils T.C. S.C KW
T*(8,L)V*A12 FC/MC/PC32A 1.01 1.05 0.99
T*(8,L)V*A12 FC/MC/PC37A 1.02 1.06 0.95
T*(8,L)V*B12 FC/MC/PC35B 1.02 1.06 0.95
T*(8,L)V*B12 FC/MC/PC43B 1.04 1.09 0.96
T*(8,L)V*C16 FC/MC/PC35C 1.02 1.07 0.93
T*(8,L)V*C16 FC/MC/PC43C 1.04 1.09 0.93
T*(8,L)V*C20 FC/MC/PC35C 1.02 1.07 0.94
T*(8,L)V*C20 FC/MC/PC43C 1.04 1.10 0.91
T*(8,L)X*A12 FC/MC/PC32A 1.02 1.06 0.95
T*(8,L)X*A12 FC/MC/PC37A 1.06 1.16 0.94
T*(8,L)X*B12 FC/MC/PC35B 1.04 1.14 0.94
T*(8,L)X*B12 FC/MC/PC43B 1.06 1.17 0.94
T*(8,L)X*C16 FC/MC/PC35C 1.04 1.14 0.93
T*(8,L)X*C16 FC/MC/PC43C 1.04 1.10 0.91
T*(8,L)X*C20 FC/MC/PC35C 1.00 1.00 0.89
T*(8,L)X*C20 FC/MC/PC43C 1.02 1.03 0.90
T*9(C,V)*B12 FC/MC/PC35B 1.01 1.06 0.97
T*9(C,V)*B12 FC/MC/PC43B 1.03 1.08 0.96
T*9(C,V)*C16 FC/MC/PC35C 1.02 1.07 0.94
T*9(C,V)*C16 FC/MC/PC43C 1.04 1.09 0.95
T*9(C,V)*C20 FC/MC/PC35C 1.02 1.07 0.93
T*9(C,V)*C20 FC/MC/PC43C 1.04 1.09 0.93
T*9X*B12 FC/MC/PC35B 1.03 1.12 0.94
T*9X*B12 FC/MC/PC43B 1.05 1.15 0.94
T*9X*C16 FC/MC/PC35C 1.04 1.12 0.93
T*9X*C16 FC/MC/PC43C 1.05 1.13 0.93
T*9X*C20 FC/MC/PC35C 1.00 1.00 0.89
T*9X*C20 FC/MC/PC43C 0.97 0.95 0.89
Y*(8,L)C*A12 FC/MC/PC32A 1.01 1.05 0.99
Y*(8,L)C*A12 FC/MC/PC37A 1.02 1.06 0.95
Y*(8,L)C*B12 FC/MC/PC35B 1.02 1.06 0.95
Y*(8,L)C*B12 FC/MC/PC43B 1.04 1.09 0.96
Y*(8,L)C*C16 FC/MC/PC35C 1.02 1.07 0.93
Y*(8,L)C*C16 FC/MC/PC43C 1.04 1.09 0.93
Y*(8,L)C*C20 FC/MC/PC35C 1.02 1.07 0.94
Y*(8,L)C*C20 FC/MC/PC43C 1.04 1.10 0.91
Y*9C*B12 FC/MC/PC35B 1.01 1.06 0.97
Y*9C*B12 FC/MC/PC43B 1.03 1.08 0.96
Y*9C*C16 FC/MC/PC35C 1.02 1.07 0.94
Y*9C*C16 FC/MC/PC43C 1.04 1.09 0.95
Y*9C*C20 FC/MC/PC35C 1.02 1.07 0.93
Y*9C*C20 FC/MC/PC43C 1.04 1.09 0.93
Furnaces Coils T.C. S.C KW
571209-YTG-C-1012
30 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Continued on next page.
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJD36S41S4
INDOOR COIL MODEL NO. AHP36
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 1000 1200 1400
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 35.0 39.8 39.9 42.7 45.2 37.7 40.6 41.0 43.5 45.7 40.5 41.5 42.0 44.4 46.1
S.C. 34.9 32.4 27.9 27.1 22.7 37.7 35.4 29.9 28.6 23.2 40.4 38.5 31.8 30.2 23.8
KW 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.60 2.60 2.60 2.60 2.60
75
T.C. 33.3 36.8 36.9 39.9 42.9 35.7 37.6 37.9 40.8 43.4 38.1 38.5 38.9 41.8 43.9
S.C. 33.2 31.1 26.5 25.9 21.5 35.7 33.7 28.5 27.6 22.2 38.1 36.4 30.5 29.4 22.9
KW 2.60 2.60 2.60 2.70 2.70 2.70 2.70 2.70 2.70 2.80 2.80 2.80 2.80 2.80 2.80
85
T.C. 31.6 33.8 33.9 37.1 40.6 33.7 34.6 34.8 38.2 41.2 35.8 35.5 35.7 39.2 41.8
S.C. 31.5 29.7 25.1 24.8 20.2 33.6 32.1 27.2 26.7 21.1 35.7 34.4 29.2 28.5 22.0
KW 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 2.90 3.00 3.00 3.00 3.00 3.00 3.10
95
T.C. 29.9 30.8 30.8 34.3 38.4 31.7 31.6 31.7 35.5 39.0 33.5 32.5 32.6 36.6 39.6
S.C. 29.8 28.4 23.7 23.6 19.0 31.6 30.4 25.8 25.7 20.1 33.4 32.4 27.9 27.7 21.1
KW 2.90 2.90 3.00 3.10 3.10 3.00 3.10 3.10 3.10 3.20 3.20 3.20 3.20 3.20 3.30
105
T.C. 26.3 26.7 27.4 31.4 35.3 28.6 28.5 28.1 32.4 35.9 30.9 30.4 28.8 33.3 36.5
S.C. 26.3 25.5 22.3 22.4 17.8 28.6 27.9 24.3 24.5 18.9 30.9 30.4 26.3 26.5 20.0
KW 3.10 3.10 3.10 3.20 3.30 3.20 3.20 3.20 3.30 3.40 3.30 3.30 3.30 3.40 3.50
115
T.C. 22.8 22.6 24.1 28.5 32.2 25.6 25.5 24.5 29.2 32.8 28.4 28.4 25.0 30.0 33.5
S.C. 22.8 22.5 20.8 21.3 16.6 25.5 25.4 22.8 23.3 17.8 28.3 28.3 24.8 25.3 18.9
KW 3.20 3.20 3.20 3.40 3.50 3.40 3.40 3.30 3.50 3.60 3.50 3.50 3.40 3.60 3.60
125
T.C. 19.3 18.4 20.7 25.6 29.1 22.5 22.4 20.9 26.1 29.8 25.8 26.4 21.2 26.7 30.4
S.C. 19.2 18.4 19.3 20.1 15.4 22.5 22.4 20.9 22.1 16.6 25.8 26.3 21.2 24.0 17.8
KW 3.40 3.40 3.30 3.50 3.70 3.60 3.50 3.50 3.60 3.70 3.70 3.70 3.60 3.80 3.80
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils T.C. S.C. KW
–FC/MC/PC37 1.03 1.02 1.02
–FC/MC/PC43 1.03 1.02 1.02
–FC/MC/PC48 1.03 1.03 1.02
–UC48 1.04 1.03 1.02
AHE36C – 1.05 1.04 0.96
AHE42D – 1.05 1.05 0.94
AHR36B – 1.04 1.04 1.02
AHR42C – 1.04 1.04 1.01
AHV36C – 1.04 1.04 0.97
AHV42D – 1.05 1.05 0.95
AV*36 – 1.05 1.04 0.96
MV12B FC/MC43B 1.04 1.04 0.97
MV12D FC/MC48D 1.06 1.05 0.93
MV16C FC/MC43C 1.05 1.04 0.96
MV16C FC/MC48C 1.05 1.05 0.95
MX12B FC/MC43B 1.04 1.04 0.97
MX12D FC/MC48D 1.05 1.05 0.95
MX16C FC/MC43C 1.05 1.04 0.94
MX16C FC/MC48C 1.06 1.05 0.93
571209-YTG-C-1012
Johnson Controls Unitary Products 31
Furnaces Coils T.C. S.C. KW
T*(8,L)V*A12 FC/MC/PC37A 1.03 1.03 1.00
T*(8,L)V*B12 FC/MC/PC43B 1.04 1.06 1.01
T*(8,L)V*C16 FC/MC/PC43C 1.04 1.04 0.96
T*(8,L)V*C16 FC/MC/PC48C 1.05 1.05 0.96
T*(8,L)V*C16 UC48C 1.05 1.05 0.96
T*(8,L)V*C20 FC/MC/PC43C 1.04 1.04 0.96
T*(8,L)V*C20 FC/MC/PC48C 1.05 1.05 0.95
T*(8,L)V*C20 UC48C 1.06 1.05 0.95
T*(8,L)X*A12 FC/MC/PC37A 1.06 1.07 0.97
T*(8,L)X*B12 FC/MC/PC43B 1.05 1.08 0.97
T*(8,L)X*C16 FC/MC/PC43C 1.05 1.04 0.94
T*(8,L)X*C16 FC/MC/PC48C 1.06 1.05 0.93
T*(8,L)X*C16 UC48C 1.06 1.06 0.93
T*(8,L)X*C20 FC/MC/PC43C 1.05 1.07 0.95
T*(8,L)X*C20 FC/MC/PC48C 1.07 1.09 0.95
T*(8,L)X*C20 UC48C 1.07 1.10 0.94
T*9(C,V)*B12 FC/MC/PC43B 1.03 1.03 1.00
T*9(C,V)*C16 FC/MC/PC43C 1.04 1.03 0.99
T*9(C,V)*C16 FC/MC/PC48C 1.05 1.04 0.97
T*9(C,V)*C16 UC48C 1.05 1.04 0.97
T*9(C,V)*C20 FC/MC/PC43C 1.04 1.04 0.97
T*9(C,V)*C20 FC/MC/PC48C 1.07 1.10 0.99
T*9(C,V)*C20 UC48C 1.07 1.10 1.00
T*9(C,V)*D20 FC/MC/PC48D 1.05 1.04 0.96
T*9(C,V)*D20 UC48D 1.05 1.04 0.97
T*9X*B12 FC/MC/PC43B 1.05 1.07 0.97
T*9X*C16 FC/MC/PC43C 1.05 1.07 0.97
T*9X*C16 FC/MC/PC48C 1.06 1.09 0.96
T*9X*C16 UC48C 1.07 1.09 0.97
T*9X*C20 FC/MC/PC43C 1.05 1.04 0.96
T*9X*C20 FC/MC/PC48C 1.05 1.05 0.95
T*9X*C20 UC48C 1.06 1.05 0.96
T*9X*D20 FC/MC/PC48D 1.05 1.05 0.95
T*9X*D20 UC48D 1.06 1.05 0.95
Y*(8,L)C*A12 FC/MC/PC37A 1.03 1.03 1.00
Y*(8,L)C*B12 FC/MC/PC43B 1.04 1.06 1.01
Y*(8,L)C*C16 FC/MC/PC43C 1.04 1.04 0.96
Y*(8,L)C*C16 FC/MC/PC48C 1.05 1.05 0.96
Y*(8,L)C*C16 UC48C 1.05 1.05 0.96
Y*(8,L)C*C20 FC/MC/PC43C 1.04 1.04 0.96
Y*(8,L)C*C20 FC/MC/PC48C 1.05 1.05 0.95
Y*(8,L)C*C20 UC48C 1.06 1.05 0.95
Y*9C*B12 FC/MC/PC43B 1.03 1.03 1.00
Y*9C*C16 FC/MC/PC43C 1.04 1.03 0.99
Y*9C*C16 FC/MC/PC48C 1.05 1.04 0.97
Y*9C*C16 UC48C 1.05 1.04 0.97
Y*9C*C20 FC/MC/PC43C 1.04 1.04 0.97
Y*9C*C20 FC/MC/PC48C 1.07 1.10 0.99
Y*9C*C20 UC48C 1.07 1.10 1.00
Y*9C*D20 FC/MC/PC48D 1.05 1.04 0.96
Y*9C*D20 UC48D 1.05 1.04 0.97
Furnaces Coils T.C. S.C. KW
571209-YTG-C-1012
32 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJD42S41S4
INDOOR COIL MODEL NO. AHP48
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 1200 1400 1600
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 42.5 44.2 45.0 49.4 52.7 44.4 45.8 46.4 50.5 53.5 46.4 47.4 47.7 51.5 54.4
S.C. 42.5 38.4 32.9 32.8 26.7 44.4 42.2 35.3 34.7 27.6 46.4 46.0 37.6 36.7 28.6
KW 2.70 2.80 2.80 2.80 2.90 2.80 2.80 2.90 2.90 2.90 2.90 2.90 2.90 3.00 3.00
75
T.C. 39.9 40.7 41.7 46.3 49.8 41.8 42.3 42.9 47.2 50.6 43.7 43.9 44.1 48.1 51.3
S.C. 39.9 36.8 31.4 31.4 25.4 41.8 40.0 33.7 33.3 26.4 43.7 43.2 36.0 35.3 27.4
KW 2.90 2.90 2.90 3.00 3.10 3.00 3.00 3.00 3.10 3.10 3.10 3.10 3.10 3.20 3.20
85
T.C. 37.4 37.3 38.4 43.2 47.0 39.2 38.8 39.5 44.0 47.6 41.0 40.4 40.6 44.8 48.3
S.C. 37.4 35.1 29.8 29.9 24.1 39.2 37.8 32.1 32.0 25.1 41.0 40.4 34.4 34.0 26.1
KW 3.10 3.10 3.10 3.20 3.30 3.20 3.20 3.20 3.30 3.30 3.30 3.30 3.30 3.40 3.40
95
T.C. 34.8 33.9 35.0 40.1 44.1 36.6 35.4 36.0 40.7 44.7 38.3 36.8 37.0 41.4 45.3
S.C. 34.8 33.4 28.3 28.5 22.8 36.6 35.4 30.6 29.9 23.8 38.3 36.8 32.8 32.6 24.8
KW 3.30 3.30 3.30 3.40 3.50 3.40 3.40 3.40 3.50 3.50 3.50 3.50 3.50 3.60 3.60
105
T.C. 31.6 31.2 30.9 36.1 40.5 33.4 32.8 31.7 37.1 41.2 35.3 34.5 32.6 38.0 42.0
S.C. 31.6 31.2 26.5 26.9 21.3 33.4 32.8 28.6 29.1 22.4 35.3 34.5 30.8 31.3 23.6
KW 3.50 3.50 3.50 3.60 3.70 3.60 3.60 3.60 3.70 3.80 3.80 3.70 3.70 3.80 3.90
115
T.C. 28.3 28.5 26.7 32.1 36.9 30.3 30.3 27.4 33.4 37.8 32.2 32.1 28.1 34.7 38.6
S.C. 28.3 28.5 24.6 25.3 19.7 30.3 30.3 26.7 27.6 21.0 32.2 32.1 28.1 29.9 22.4
KW 3.70 3.70 3.60 3.80 3.90 3.80 3.80 3.70 3.90 4.00 4.00 4.00 3.80 4.00 4.10
125
T.C. 25.1 25.8 22.6 28.1 33.3 27.1 27.8 23.1 29.7 34.3 29.1 29.7 23.7 31.3 35.3
S.C. 25.1 25.8 22.6 23.6 18.1 27.1 27.8 23.1 26.1 19.6 29.1 29.7 23.7 28.6 21.2
KW 3.90 3.90 3.80 4.00 4.20 4.00 4.00 3.90 4.10 4.30 4.20 4.20 4.00 4.20 4.40
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils T.C. S.C. KW
–FC/MC/PC60 0.96 0.99 1.01
–UC60 0.96 0.98 1.02
AHE48D – 0.98 1.01 0.94
AHR48D – 0.96 0.96 1.01
AHV48D – 0.97 0.97 0.96
AV*48 – 0.98 1.01 0.94
AV*60 – 0.98 1.01 0.94
MV16C FC60C 0.98 1.00 0.97
MV20D FC/MC60D 0.98 1.00 0.96
MX16C FC60C 0.98 1.01 0.94
MX20D FC/MC60D 1.01 1.06 0.94
Furnaces Coils T.C. S.C. KW
T*(8,L)V*C16 FC/PC60C 0.97 1.00 0.98
T*(8,L)V*C16 UC60C 0.97 1.00 0.97
T*(8,L)V*C20 FC/PC60C 0.98 1.00 0.96
T*(8,L)V*C20 UC60C 0.97 1.00 0.96
T*(8,L)X*C16 FC/PC60C 0.98 1.01 0.94
T*(8,L)X*C16 UC60C 0.98 1.01 0.94
T*(8,L)X*C20 FC/PC60C 1.01 1.06 0.96
T*(8,L)X*C20 UC60C 0.98 1.04 0.95
T*9(C,V)*C16 FC/PC60C 0.97 0.99 1.01
T*9(C,V)*C16 UC60C 0.96 0.99 1.00
T*9(C,V)*C20 FC/PC60C 0.97 1.00 0.99
T*9(C,V)*C20 UC60C 0.97 0.99 0.99
T*9(C,V)*D20 FC/MC/PC60D 0.97 1.00 0.98
T*9(C,V)*D20 UC60D 0.97 1.00 0.98
T*9X*C16 FC/PC60C 1.00 1.04 0.97
T*9X*C16 UC60C 0.97 1.00 0.96
T*9X*C20 FC/PC60C 1.00 1.05 0.96
T*9X*C20 UC60C 0.98 1.00 0.96
T*9X*D20 FC/MC/PC60D 1.01 1.08 0.95
T*9X*D20 UC60D 1.00 1.05 0.95
Y*(8,L)C*C16 FC/PC60C 0.97 1.00 0.98
Y*(8,L)C*C16 UC60C 0.97 1.00 0.97
Y*(8,L)C*C20 FC/PC60C 0.98 1.00 0.96
Y*(8,L)C*C20 UC60C 0.97 1.00 0.96
Y*9C*C16 FC/PC60C 0.97 0.99 1.01
Y*9C*C16 UC60C 0.96 0.99 1.00
Y*9C*C20 FC/PC60C 0.97 1.00 0.99
Y*9C*C20 UC60C 0.97 0.99 0.99
Y*9C*D20 FC/MC/PC60D 0.97 1.00 0.98
Y*9C*D20 UC60D 0.97 1.00 0.98
Furnaces Coils T.C. S.C. KW
571209-YTG-C-1012
Johnson Controls Unitary Products 33
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Continued on next page.
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJD48S41S4
INDOOR COIL MODEL NO. AHP48
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 1510 1710 1910
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 47.6 50.1 49.8 54.1 60.7 49.4 50.8 51.0 55.8 61.9 51.2 51.5 52.2 57.5 63.1
S.C. 47.6 44.7 37.8 37.0 30.4 49.4 48.3 39.9 39.3 31.5 51.2 51.5 42.0 41.6 32.6
KW 2.90 2.90 2.90 3.00 3.00 3.00 3.00 3.00 3.00 3.10 3.10 3.10 3.10 3.10 3.20
75
T.C. 45.1 46.6 46.5 50.8 56.9 46.7 47.2 47.5 52.2 58.0 48.4 47.9 48.5 53.6 59.0
S.C. 45.1 43.1 36.2 35.6 28.9 46.7 45.8 38.3 37.8 30.0 48.4 47.9 40.3 40.0 31.1
KW 3.20 3.20 3.20 3.20 3.30 3.20 3.20 3.20 3.30 3.30 3.30 3.30 3.30 3.40 3.40
85
T.C. 42.5 43.1 43.2 47.5 53.2 44.1 43.7 44.0 48.6 54.1 45.6 44.3 44.7 49.7 55.0
S.C. 42.5 41.5 34.7 34.2 27.3 44.1 43.3 36.7 36.2 28.4 45.6 44.3 38.7 38.3 29.6
KW 3.40 3.40 3.40 3.50 3.50 3.50 3.50 3.50 3.50 3.60 3.60 3.60 3.60 3.60 3.70
95
T.C. 40.0 39.6 39.9 44.2 49.4 41.4 40.2 40.4 45.0 50.2 42.8 40.7 41.0 45.8 51.0
S.C. 40.0 39.6 33.1 32.7 25.8 41.4 40.2 35.0 34.7 26.9 42.8 40.7 37.0 36.6 28.0
KW 3.60 3.60 3.60 3.70 3.80 3.70 3.70 3.70 3.80 3.90 3.80 3.80 3.80 3.90 4.00
105
T.C. 37.2 37.1 36.3 40.6 45.3 38.5 37.8 36.8 41.1 45.9 39.7 38.6 37.2 41.7 46.6
S.C. 37.2 37.1 31.6 31.3 24.2 38.5 37.8 33.5 33.2 25.2 39.7 38.6 35.4 35.1 26.3
KW 3.90 3.90 3.90 4.00 4.10 4.00 4.00 3.90 4.00 4.20 4.10 4.10 4.00 4.10 4.20
115
T.C. 34.5 34.5 32.8 36.9 41.1 35.5 35.5 33.1 37.2 41.6 36.6 36.4 33.5 37.6 42.1
S.C. 34.5 34.5 30.0 29.8 22.5 35.5 35.5 31.9 31.7 23.6 36.6 36.4 33.5 33.5 24.6
KW 4.10 4.10 4.10 4.20 4.30 4.20 4.20 4.20 4.30 4.40 4.40 4.40 4.30 4.40 4.50
125
T.C. 31.7 31.9 29.3 33.2 37.0 32.6 33.1 29.5 33.3 37.3 33.5 34.2 29.7 33.4 37.7
S.C. 31.7 31.9 28.5 28.3 20.9 32.6 33.1 29.5 30.1 21.9 33.5 34.2 29.7 31.9 22.9
KW 4.40 4.40 4.30 4.50 4.60 4.50 4.50 4.40 4.50 4.70 4.60 4.60 4.50 4.60 4.80
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils T.C. S.C. KW
–FC/MC/PC60 0.98 0.97 0.98
–FC/MC62 0.99 0.98 0.98
–UC60 0.97 0.95 0.97
AHE48D –0.99 0.97 0.93
AHE60D –1.00 0.99 0.92
AHR48D –0.98 0.95 0.98
AHR60D –0.98 0.97 0.97
AHV48D –0.99 0.96 0.94
AHV60D –0.99 0.99 0.94
AV*48 –0.99 0.99 0.93
AV*60 –1.00 0.99 0.93
MV16C FC60C 0.99 0.99 0.94
MV20D FC/MC60D 0.99 0.99 0.94
MV20D FC/MC62D 1.00 0.99 0.93
MX16C FC60C 1.00 0.99 0.92
MX20D FC/MC60D 1.00 1.00 0.91
MX20D FC/MC62D 1.01 1.00 0.91
571209-YTG-C-1012
34 Johnson Controls Unitary Products
Furnaces Coils T.C. S.C. KW
T*(8,L)V*C16 FC/MC62D 0.99 0.99 0.95
T*(8,L)V*C16 FC/PC60C 0.98 0.98 0.96
T*(8,L)V*C16 UC60C 0.98 0.95 0.96
T*(8,L)V*C20 FC/MC62D 1.00 0.99 0.95
T*(8,L)V*C20 FC/PC60C 0.99 0.98 0.96
T*(8,L)V*C20 UC60C 0.98 0.96 0.94
T*(8,L)X*C16 FC/MC62D 1.00 0.99 0.95
T*(8,L)X*C16 FC/PC60C 0.99 0.99 0.94
T*(8,L)X*C16 UC60C 0.98 0.96 0.94
T*(8,L)X*C20 FC/MC62D 1.00 0.99 0.94
T*(8,L)X*C20 FC/PC60C 0.99 0.99 0.94
T*(8,L)X*C20 UC60C 1.00 0.97 0.90
T*9(C,V)*C16 FC/MC62D 0.99 0.99 0.96
T*9(C,V)*C16 FC/PC60C 0.98 0.98 0.97
T*9(C,V)*C16 UC60C 0.98 0.95 0.97
T*9(C,V)*C20 FC/MC62D 0.99 0.98 0.98
T*9(C,V)*C20 FC/PC60C 0.98 0.97 0.97
T*9(C,V)*C20 UC60C 0.98 0.95 0.97
T*9(C,V)*D20 FC/MC/PC60D 0.99 0.98 0.97
T*9(C,V)*D20 FC/MC62D 0.99 0.98 0.96
T*9(C,V)*D20 UC60D 0.98 0.95 0.96
T*9X*C16 FC/MC62D 1.00 0.99 0.95
T*9X*C16 FC/PC60C 0.99 0.99 0.95
T*9X*C16 UC60C 0.98 0.96 0.94
T*9X*C20 FC/MC62D 1.00 0.99 0.94
T*9X*C20 FC/PC60C 0.99 0.99 0.94
T*9X*C20 UC60C 0.99 0.96 0.94
T*9X*D20 FC/MC/PC60D 1.00 0.96 0.90
T*9X*D20 FC/MC62D 1.00 0.99 0.95
T*9X*D20 UC60D 0.98 0.95 0.89
Y*(8,L)C*C16 FC/MC62D 0.99 0.99 0.95
Y*(8,L)C*C16 FC/PC60C 0.98 0.98 0.96
Y*(8,L)C*C16 UC60C 0.98 0.95 0.96
Y*(8,L)C*C20 FC/MC62D 1.00 0.99 0.95
Y*(8,L)C*C20 FC/PC60C 0.99 0.98 0.96
Y*(8,L)C*C20 UC60C 0.98 0.96 0.94
Y*9C*C16 FC/MC62D 0.99 0.99 0.96
Y*9C*C16 FC/PC60C 0.98 0.98 0.97
Y*9C*C16 UC60C 0.98 0.95 0.97
Y*9C*C20 FC/MC62D 0.99 0.98 0.98
Y*9C*C20 FC/PC60C 0.98 0.97 0.97
Y*9C*C20 UC60C 0.98 0.95 0.97
Y*9C*D20 FC/MC/PC60D 0.99 0.98 0.97
Y*9C*D20 FC/MC62D 0.99 0.98 0.96
Y*9C*D20 UC60D 0.98 0.95 0.96
Furnaces Coils T.C. S.C. KW
571209-YTG-C-1012
Johnson Controls Unitary Products 35
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
COOLING PERFORMANCE DATA
CONDENSING UNIT MODEL NO. YHJD60S41S5
INDOOR COIL MODEL NO. AHX60
CONDENSING
ENTERING AIR
TEMPERATURE
IDCFM 1800 2000 2200
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
65
T.C. 57.5 60.5 60.5 66.0 72.0 59.4 61.6 61.6 67.1 73.0 61.2 62.7 62.6 68.2 74.0
S.C. 57.1 52.5 44.9 44.2 35.6 58.9 55.6 46.8 46.2 36.7 60.8 58.6 48.8 48.2 37.7
KW 3.59 3.62 3.62 3.68 3.75 3.68 3.70 3.71 3.76 3.83 3.78 3.79 3.79 3.85 3.92
75
T.C. 55.4 57.7 57.7 63.0 68.8 57.1 58.6 58.6 64.0 69.7 58.8 59.6 59.5 65.0 70.7
S.C. 55.0 51.3 43.6 42.9 34.2 56.7 54.0 45.5 44.9 35.3 58.4 56.8 47.4 46.8 36.4
KW 4.02 4.05 4.05 4.11 4.18 4.11 4.13 4.13 4.19 4.27 4.21 4.22 4.21 4.28 4.36
85
T.C. 53.3 54.8 54.9 60.1 65.6 54.9 55.7 55.6 61.0 66.5 56.5 56.5 56.3 61.8 67.4
S.C. 52.9 50.0 42.2 41.6 32.8 54.5 52.5 44.1 43.6 33.9 56.1 54.9 46.1 45.5 35.0
KW 4.45 4.47 4.47 4.54 4.61 4.55 4.56 4.56 4.62 4.70 4.64 4.64 4.64 4.71 4.79
95
T.C. 51.2 51.9 52.0 57.1 62.4 52.6 52.7 52.6 57.9 63.2 54.1 53.5 53.1 58.6 64.0
S.C. 50.8 48.8 40.9 40.4 31.4 52.3 50.9 42.8 42.2 32.5 53.7 53.1 44.7 44.1 33.7
KW 4.89 4.90 4.90 4.97 5.05 4.98 4.98 4.98 5.06 5.14 5.07 5.07 5.06 5.14 5.23
105
T.C. 48.5 48.3 48.6 53.4 58.5 49.8 49.5 49.1 54.0 59.1 51.2 50.6 49.5 54.6 59.7
S.C. 48.1 46.6 39.4 38.8 29.9 49.5 48.4 41.3 40.7 31.0 50.8 50.2 43.1 42.6 32.1
KW 5.43 5.42 5.43 5.50 5.58 5.52 5.52 5.51 5.59 5.67 5.62 5.62 5.60 5.68 5.76
115
T.C. 45.8 44.8 45.2 49.6 54.6 47.0 46.3 45.5 50.1 55.0 48.3 47.7 45.9 50.6 55.5
S.C. 45.5 44.5 37.9 37.3 28.5 46.7 45.9 39.7 39.2 29.5 47.9 47.4 41.6 41.1 30.5
KW 5.97 5.95 5.97 6.04 6.12 6.07 6.06 6.05 6.12 6.21 6.17 6.16 6.13 6.21 6.29
125
T.C. 43.1 41.2 41.7 45.9 50.7 44.2 43.0 42.0 46.2 50.9 45.4 44.9 42.3 46.5 51.2
S.C. 42.8 41.2 36.3 35.7 27.0 43.9 43.0 38.2 37.6 28.0 45.0 44.5 40.0 39.5 28.9
KW 6.51 6.48 6.50 6.57 6.65 6.62 6.59 6.58 6.66 6.74 6.72 6.71 6.66 6.74 6.82
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils T.C. S.C. KW
–FC/MC62 0.99 0.97 0.96
–FC64 0.98 1.01 0.99
AHE60D –1.01 0.97 0.94
AHR60D –1.00 1.00 1.00
AHV60D –0.99 0.92 0.93
MV20D FC/MC62D 1.00 0.98 0.94
MV20D FC64D 0.98 1.02 0.97
MX20D FC/MC62D 1.01 0.97 0.93
MX20D FC64D 0.98 1.01 0.94
Furnaces Coils T.C. S.C. KW
T*(8,L)V*C20 FC/MC62D 0.98 0.93 0.94
T*(8,L)V*C20 FC64D 0.98 1.01 0.98
T*(8,L)X*C20 FC/MC62D 0.99 0.95 0.91
T*(8,L)X*C20 FC64D 0.97 0.97 0.93
T*9(C,V)*C20 FC/MC62D 0.98 0.93 0.94
T*9(C,V)*C20 FC64D 0.96 0.96 0.95
T*9(C,V)*D20 FC/MC62D 0.99 0.93 0.94
T*9(C,V)*D20 FC64D 0.96 0.95 0.95
T*9X*C20 FC/MC62D 0.99 0.95 0.91
T*9X*C20 FC64D 0.96 0.95 0.93
T*9X*D20 FC/MC62D 0.99 0.95 0.92
T*9X*D20 FC64D 0.97 0.96 0.94
Y*(8,L)C*C20 FC/MC62D 0.98 0.93 0.94
Y*(8,L)C*C20 FC64D 0.98 1.01 0.98
Y*9C*C20 FC/MC62D 0.98 0.93 0.94
Y*9C*C20 FC64D 0.96 0.96 0.96
Y*9C*D20 FC/MC62D 0.99 0.93 0.94
Y*9C*D20 FC64D 0.96 0.95 0.95
571209-YTG-C-1012
36 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
Continued on next page.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO YHJD18S41S2
EVAPORATOR COIL MODEL NO FC35
AIR TEMP.
ENTERING
OUTDOOR UNIT
AIR TEMP.
ENTERING
INDOOR COIL
ID CFM
450 600 750
MBH COP KW MBH COP KW MBH COP KW
60
60 21.1 4.1 1.50 22.2 4.5 1.44 23.3 4.9 1.39
70 20.5 3.6 1.65 21.6 4.0 1.59 22.6 4.3 1.53
80 19.9 3.2 1.81 20.9 3.5 1.74 21.9 3.9 1.66
47
60 18.6 3.8 1.45 19.2 4.0 1.41 19.8 4.2 1.38
70 17.7 3.3 1.60 18.4 3.5 1.55 19.1 3.7 1.51
80 16.8 2.8 1.74 17.6 3.1 1.69 18.4 3.3 1.64
40
60 16.7 3.4 1.43 17.3 3.6 1.40 17.9 3.8 1.37
70 16.1 3.0 1.57 16.8 3.2 1.53 17.4 3.4 1.50
80 15.6 2.7 1.70 16.3 2.9 1.66 17.0 3.1 1.62
30
60 14.6 3.1 1.39 15.1 3.2 1.37 15.5 3.4 1.36
70 14.2 2.7 1.52 14.6 2.9 1.50 15.0 3.0 1.48
80 13.7 2.4 1.66 14.1 2.5 1.63 14.4 2.6 1.61
17
60 11.7 2.6 1.34 12.0 2.6 1.34 12.3 2.7 1.34
70 11.2 2.2 1.48 11.6 2.3 1.47 11.9 2.4 1.46
80 10.8 2.0 1.62 11.1 2.0 1.60 11.5 2.1 1.58
10
60 10.1 2.3 1.31 10.3 2.3 1.31 10.4 2.3 1.32
70 9.6 1.9 1.45 9.9 2.0 1.44 10.2 2.1 1.44
80 9.1 1.7 1.59 9.5 1.8 1.58 9.9 1.9 1.57
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils MBH COP KW
–FC/MC/PC18 1.05 0.94 1.13
–FC/MC/PC24 1.06 0.98 1.08
–FC/MC/PC30 1.06 0.98 1.08
–UC24 1.05 0.98 1.08
–UC30 1.05 0.98 1.08
AHE18B – 1.03 1.01 1.02
AHR18B – 1.05 0.97 1.09
AHV18B – 1.03 1.00 1.03
AV*24 – 1.03 1.03 1.00
MV12B FC/MC/PC18B 1.03 1.01 1.02
MV12B FC/MC24B 1.04 1.03 1.00
MV12B FC/MC30B 1.04 1.03 1.00
MX12B FC/MC/PC18B 1.03 1.01 1.02
MX12B FC/MC24B 1.03 1.08 0.96
MX12B FC/MC30B 1.03 1.08 0.96
571209-YTG-C-1012
Johnson Controls Unitary Products 37
Furnaces Coils MBH COP KW
T*(8,L)V*A12 FC/MC/PC18A 1.03 0.99 1.04
T*(8,L)V*A12 FC/MC/PC24A 1.04 1.06 0.98
T*(8,L)V*A12 FC/MC/PC30A 1.04 1.06 0.98
T*(8,L)V*A12 UC18A 1.04 1.02 1.02
T*(8,L)V*A12 UC24A 1.04 1.06 0.98
T*(8,L)V*A12 UC30A 1.04 1.06 0.98
T*(8,L)V*B12 FC/MC/PC18B 1.03 0.99 1.04
T*(8,L)V*B12 FC/MC/PC24B 1.03 1.04 0.99
T*(8,L)V*B12 FC/MC/PC30B 1.03 1.04 0.99
T*(8,L)V*B12 UC18B 1.04 1.02 1.01
T*(8,L)V*B12 UC24B 1.03 1.06 0.97
T*(8,L)V*B12 UC30B 1.03 1.06 0.97
T*(8,L)X*A12 FC/MC/PC18A 1.02 0.98 1.05
T*(8,L)X*A12 FC/MC/PC24A 1.03 1.06 0.97
T*(8,L)X*A12 FC/MC/PC30A 1.03 1.06 0.97
T*(8,L)X*A12 UC18A 1.03 1.03 1.00
T*(8,L)X*A12 UC24A 1.03 1.05 0.98
T*(8,L)X*A12 UC30A 1.03 1.05 0.98
T*(8,L)X*B12 FC/MC/PC18B 1.03 1.01 1.02
T*(8,L)X*B12 FC/MC/PC24B 1.03 1.06 0.97
T*(8,L)X*B12 FC/MC/PC30B 1.03 1.06 0.97
T*(8,L)X*B12 UC18B 1.03 1.03 1.00
T*(8,L)X*B12 UC24B 1.03 1.06 0.97
T*(8,L)X*B12 UC30B 1.03 1.06 0.97
T*9V*A10 FC/MC/PC18A 1.03 0.98 1.05
T*9V*A10 FC/MC/PC24A 1.04 1.03 1.01
T*9V*A10 FC/MC/PC30A 1.04 1.03 1.01
T*9(C,V)*B12 FC/MC/PC18B 1.03 1.01 1.02
T*9(C,V)*B12 FC/MC/PC24B 1.03 1.05 0.99
T*9(C,V)*B12 FC/MC/PC30B 1.03 1.05 0.99
T*9(C,V)*B12 UC18B 1.04 1.02 1.01
T*9(C,V)*B12 UC24B 1.03 1.05 0.99
T*9(C,V)*B12 UC30B 1.03 1.05 0.99
T*9X*A10 FC/MC/PC18A 1.03 0.99 1.04
T*9X*A10 FC/MC/PC24A 1.04 1.03 1.00
T*9X*A10 FC/MC/PC30A 1.04 1.03 1.00
T*9X*B12 FC/MC/PC18B 1.03 1.01 1.02
T*9X*B12 FC/MC/PC24B 1.03 1.06 0.97
T*9X*B12 FC/MC/PC30B 1.03 1.06 0.97
T*9X*B12 UC18B 1.03 1.03 1.00
T*9X*B12 UC24B 1.03 1.06 0.97
T*9X*B12 UC30B 1.03 1.06 0.97
Y*(8,L)C*A12 FC/MC/PC18A 1.03 0.99 1.04
Y*(8,L)C*A12 FC/MC/PC24A 1.04 1.06 0.98
Y*(8,L)C*A12 FC/MC/PC30A 1.04 1.06 0.98
Y*(8,L)C*A12 UC18A 1.04 1.02 1.02
Y*(8,L)C*A12 UC24A 1.04 1.06 0.98
Y*(8,L)C*A12 UC30A 1.04 1.06 0.98
Y*(8,L)C*B12 FC/MC/PC18B 1.03 0.99 1.04
Y*(8,L)C*B12 FC/MC/PC24B 1.03 1.04 0.99
Y*(8,L)C*B12 FC/MC/PC30B 1.03 1.04 0.99
Y*(8,L)C*B12 UC18B 1.04 1.02 1.01
Y*(8,L)C*B12 UC24B 1.03 1.06 0.97
Y*(8,L)C*B12 UC30B 1.03 1.06 0.97
Y*9C*B12 FC/MC/PC18B 1.03 1.01 1.02
Y*9C*B12 FC/MC/PC24B 1.03 1.05 0.99
Y*9C*B12 FC/MC/PC30B 1.03 1.05 0.99
Y*9C*B12 UC18B 1.04 1.02 1.01
Y*9C*B12 UC24B 1.03 1.05 0.99
Y*9C*B12 UC30B 1.03 1.05 0.99
Furnaces Coils MBH COP KW
571209-YTG-C-1012
38 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO YHJD24S41S4
EVAPORATOR COIL MODEL NO AHP30
AIR TEMP.
ENTERING
OUTDOOR UNIT
AIR TEMP.
ENTERING
INDOOR COIL
ID CFM
600 800 1000
MBH COP KW MBH COP KW MBH COP KW
60
60 28.3 3.8 2.20 27.5 3.7 2.15 26.7 3.7 2.10
70 27.5 3.5 2.27 26.9 3.5 2.23 26.4 3.5 2.19
80 26.7 3.3 2.35 26.3 3.3 2.32 26.0 3.3 2.28
47
60 24.9 3.6 2.03 24.5 3.6 2.01 24.1 3.6 1.98
70 23.8 3.4 2.08 24.0 3.4 2.06 24.1 3.4 2.10
80 22.7 3.1 2.14 23.4 3.2 2.15 24.1 3.3 2.17
40
60 23.1 3.5 1.94 22.7 3.5 1.93 22.4 3.4 1.92
70 21.9 3.2 1.98 22.0 3.2 1.99 22.0 3.2 1.99
80 20.7 3.0 2.03 21.2 3.0 2.05 21.7 3.1 2.07
30
60 19.0 3.1 1.79 19.6 3.2 1.82 20.1 3.2 1.84
70 17.7 2.8 1.83 18.6 2.9 1.87 19.4 3.0 1.90
80 16.4 2.6 1.87 17.6 2.7 1.92 18.7 2.8 1.96
17
60 13.8 2.5 1.64 13.9 2.4 1.73 14.1 2.3 1.83
70 13.3 2.4 1.65 13.8 2.3 1.73 14.3 2.3 1.82
80 12.5 2.2 1.68 13.4 2.2 1.75 14.3 2.3 1.81
10
60 12.7 2.4 1.58 11.1 2.0 1.61 9.5 1.7 1.64
70 11.1 2.0 1.59 10.7 1.9 1.64 10.3 1.8 1.69
80 9.4 1.7 1.61 10.2 1.8 1.68 11.1 1.9 1.75
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils MBH COP KW
–FC/MC/PC32 1.00 1.00 1.00
–FC/MC/PC35 1.00 1.00 1.00
–FC/MC/PC37 1.01 1.01 1.00
–FC/MC/PC43 1.01 1.01 1.00
AHE24B – 0.97 1.05 0.92
AHE30B – 0.97 1.05 0.92
AHR24B – 0.97 0.99 0.97
AHV24B – 0.94 1.02 0.93
AHV30B – 0.96 1.04 0.93
AHV36C – 0.98 1.07 0.91
AV*36 – 0.96 1.06 0.90
MV12B FC/MC35B 0.98 1.06 0.92
MV12B FC/MC43B 0.98 1.07 0.92
MX12B FC/MC35B 0.97 1.08 0.90
MX12B FC/MC43B 0.96 1.06 0.91
Furnaces Coils MBH COP KW
T*(8,L)V*A12 FC/MC/PC32A 0.96 1.03 0.93
T*(8,L)V*A12 FC/MC/PC37A 0.98 1.07 0.92
T*(8,L)V*B12 FC/MC/PC35B 0.98 1.05 0.93
T*(8,L)V*B12 FC/MC/PC43B 0.98 1.07 0.92
T*(8,L)V*C16 FC/MC/PC35C 0.98 1.06 0.92
T*(8,L)V*C16 FC/MC/PC43C 0.98 1.08 0.90
T*(8,L)V*C20 FC/MC/PC35C 0.95 1.04 0.92
T*(8,L)V*C20 FC/MC/PC43C 0.96 1.05 0.91
T*(8,L)X*A12 FC/MC/PC32A 0.98 1.07 0.91
T*(8,L)X*A12 FC/MC/PC37A 0.98 1.11 0.89
T*(8,L)X*B12 FC/MC/PC35B 0.97 1.07 0.90
T*(8,L)X*B12 FC/MC/PC43B 0.98 1.11 0.89
T*(8,L)X*C16 FC/MC/PC35C 0.97 1.08 0.90
T*(8,L)X*C16 FC/MC/PC43C 0.98 1.11 0.89
T*(8,L)X*C20 FC/MC/PC35C 0.98 1.07 0.91
T*(8,L)X*C20 FC/MC/PC43C 0.98 1.08 0.90
T*9V*A10 FC/MC/PC32A 0.98 1.02 0.96
T*9V*A10 FC/MC/PC37A 0.99 1.04 0.96
T*9(C,V)*B12 FC/MC/PC35B 0.98 1.04 0.94
T*9(C,V)*B12 FC/MC/PC43B 0.98 1.06 0.92
T*9(C,V)*C16 FC/MC/PC35C 0.98 1.06 0.93
T*9(C,V)*C16 FC/MC/PC43C 0.98 1.07 0.92
T*9(C,V)*C20 FC/MC/PC35C 0.95 1.03 0.92
T*9(C,V)*C20 FC/MC/PC43C 1.00 1.09 0.92
T*9X*A10 FC/MC/PC32A 0.96 1.01 0.95
T*9X*A10 FC/MC/PC37A 0.98 1.04 0.94
T*9X*B12 FC/MC/PC35B 0.98 1.07 0.91
T*9X*B12 FC/MC/PC43B 0.98 1.09 0.90
T*9X*C16 FC/MC/PC35C 0.98 1.07 0.91
T*9X*C16 FC/MC/PC43C 0.98 1.09 0.90
T*9X*C20 FC/MC/PC35C 0.98 1.06 0.92
T*9X*C20 FC/MC/PC43C 0.98 1.08 0.90
Y*(8,L)C*A12 FC/MC/PC32A 0.96 1.03 0.93
Y*(8,L)C*A12 FC/MC/PC37A 0.98 1.07 0.92
Y*(8,L)C*B12 FC/MC/PC35B 0.98 1.05 0.93
Y*(8,L)C*B12 FC/MC/PC43B 0.98 1.07 0.92
Y*(8,L)C*C16 FC/MC/PC35C 0.98 1.06 0.92
Y*(8,L)C*C16 FC/MC/PC43C 0.98 1.08 0.90
Y*(8,L)C*C20 FC/MC/PC35C 0.95 1.04 0.92
Y*(8,L)C*C20 FC/MC/PC43C 0.96 1.05 0.91
Y*9C*B12 FC/MC/PC35B 0.98 1.04 0.94
Y*9C*B12 FC/MC/PC43B 0.98 1.06 0.92
Y*9C*C16 FC/MC/PC35C 0.98 1.06 0.93
Y*9C*C16 FC/MC/PC43C 0.98 1.07 0.92
Y*9C*C20 FC/MC/PC35C 0.95 1.03 0.92
Y*9C*C20 FC/MC/PC43C 1.00 1.09 0.92
Furnaces Coils MBH COP KW
571209-YTG-C-1012
Johnson Controls Unitary Products 39
Multipliers for determining the performance with other indoor sections.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO YHJD30S41S4
EVAPORATOR COIL MODEL NO AHP30
AIR TEMP.
ENTERING
OUTDOOR UNIT
AIR TEMP.
ENTERING
INDOOR COIL
ID CFM
800 1000 1200
MBH COP KW MBH COP KW MBH COP KW
60
60 32.2 3.7 2.52 31.2 3.7 2.47 30.2 3.7 2.41
70 31.6 3.5 2.64 30.9 3.5 2.60 30.2 3.5 2.56
80 30.9 3.3 2.77 30.5 3.3 2.73 30.2 3.3 2.70
47
60 28.9 3.6 2.35 28.3 3.6 2.33 27.7 3.5 2.31
70 27.9 3.4 2.43 27.6 3.3 2.45 27.3 3.2 2.47
80 26.9 3.1 2.51 26.9 3.1 2.51 26.9 3.1 2.50
40
60 26.7 3.5 2.25 26.5 3.4 2.25 26.3 3.4 2.26
70 25.6 3.2 2.32 25.6 3.2 2.33 25.6 3.2 2.34
80 24.4 3.0 2.39 24.7 3.0 2.41 24.9 3.0 2.43
30
60 23.2 3.3 2.08 23.4 3.3 2.11 23.5 3.2 2.13
70 21.3 2.9 2.16 21.8 2.9 2.18 22.3 3.0 2.20
80 19.4 2.6 2.23 20.3 2.6 2.25 21.1 2.7 2.26
17
60 17.3 2.6 1.92 17.8 2.7 1.95 18.4 2.7 1.99
70 15.4 2.3 1.97 16.1 2.3 2.04 16.8 2.3 2.12
80 12.7 1.9 2.00 13.6 1.9 2.08 14.5 2.0 2.16
10
60 14.2 2.2 1.86 14.4 2.2 1.94 14.5 2.1 2.03
70 12.1 1.9 1.87 12.2 1.8 1.94 12.3 1.8 2.01
80 9.9 1.6 1.87 10.0 1.5 1.94 10.1 1.5 2.00
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils MBH COP KW
–FC/MC/PC32 1.00 1.00 1.00
–FC/MC/PC35 1.00 1.00 1.00
–FC/MC/PC37 1.04 1.05 1.00
–FC/MC/PC43 1.04 1.04 1.00
AHE30B – 1.01 1.07 0.95
AHE36C – 1.02 1.12 0.91
AHR30B – 1.05 1.04 1.01
AHR36B – 1.06 1.05 1.00
AHV30B – 1.01 1.05 0.96
AHV36C – 1.00 1.10 0.91
AV*36 – 1.01 1.12 0.90
MV12B FC/MC35B 1.01 1.09 0.92
MV12B FC/MC43B 1.02 1.10 0.93
MV16C FC/MC35C 1.01 1.10 0.91
MV16C FC/MC43C 1.02 1.11 0.92
MX12B FC/MC35B 1.01 1.08 0.94
MX12B FC/MC43B 1.04 1.12 0.92
MX16C FC/MC35C 1.00 1.10 0.91
MX16C FC/MC43C 1.01 1.13 0.90
Furnaces Coils MBH COP KW
T*(8,L)V*A12 FC/MC/PC32A 1.03 1.03 1.00
T*(8,L)V*A12 FC/MC/PC37A 1.02 1.08 0.95
T*(8,L)V*B12 FC/MC/PC35B 1.01 1.06 0.96
T*(8,L)V*B12 FC/MC/PC43B 1.03 1.08 0.95
T*(8,L)V*C16 FC/MC/PC35C 1.01 1.08 0.93
T*(8,L)V*C16 FC/MC/PC43C 1.02 1.11 0.92
T*(8,L)V*C20 FC/MC/PC35C 1.01 1.07 0.95
T*(8,L)V*C20 FC/MC/PC43C 1.02 1.12 0.91
T*(8,L)X*A12 FC/MC/PC32A 1.01 1.07 0.95
T*(8,L)X*A12 FC/MC/PC37A 1.04 1.13 0.93
T*(8,L)X*B12 FC/MC/PC35B 1.02 1.09 0.94
T*(8,L)X*B12 FC/MC/PC43B 1.04 1.12 0.92
T*(8,L)X*C16 FC/MC/PC35C 1.01 1.10 0.92
T*(8,L)X*C16 FC/MC/PC43C 1.01 1.13 0.90
T*(8,L)X*C20 FC/MC/PC35C 0.97 1.05 0.92
T*(8,L)X*C20 FC/MC/PC43C 0.99 1.09 0.91
T*9(C,V)*B12 FC/MC/PC35B 1.02 1.05 0.97
T*9(C,V)*B12 FC/MC/PC43B 1.04 1.08 0.96
T*9(C,V)*C16 FC/MC/PC35C 1.01 1.08 0.94
T*9(C,V)*C16 FC/MC/PC43C 1.03 1.09 0.94
T*9(C,V)*C20 FC/MC/PC35C 1.01 1.08 0.93
T*9(C,V)*C20 FC/MC/PC43C 1.02 1.11 0.92
T*9X*B12 FC/MC/PC35B 1.01 1.08 0.94
T*9X*B12 FC/MC/PC43B 1.04 1.12 0.92
T*9X*C16 FC/MC/PC35C 1.01 1.09 0.93
T*9X*C16 FC/MC/PC43C 1.03 1.12 0.92
T*9X*C20 FC/MC/PC35C 0.96 1.05 0.91
T*9X*C20 FC/MC/PC43C 0.96 1.04 0.93
Y*(8,L)C*A12 FC/MC/PC32A 1.03 1.03 1.00
Y*(8,L)C*A12 FC/MC/PC37A 1.02 1.08 0.95
Y*(8,L)C*B12 FC/MC/PC35B 1.01 1.06 0.96
Y*(8,L)C*B12 FC/MC/PC43B 1.03 1.08 0.95
Y*(8,L)C*C16 FC/MC/PC35C 1.01 1.08 0.93
Y*(8,L)C*C16 FC/MC/PC43C 1.02 1.11 0.92
Y*(8,L)C*C20 FC/MC/PC35C 1.01 1.07 0.95
Y*(8,L)C*C20 FC/MC/PC43C 1.02 1.12 0.91
Y*9C*B12 FC/MC/PC35B 1.02 1.05 0.97
Y*9C*B12 FC/MC/PC43B 1.04 1.08 0.96
Y*9C*C16 FC/MC/PC35C 1.01 1.08 0.94
Y*9C*C16 FC/MC/PC43C 1.03 1.09 0.94
Y*9C*C20 FC/MC/PC35C 1.01 1.08 0.93
Y*9C*C20 FC/MC/PC43C 1.02 1.11 0.92
Furnaces Coils MBH COP KW
571209-YTG-C-1012
40 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
Continued on next page.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO YHJD36S41S4
EVAPORATOR COIL MODEL NO AHP36
AIR TEMP.
ENTERING
OUTDOOR UNIT
AIR TEMP.
ENTERING
INDOOR COIL
ID CFM
1000 1200 1400
MBH COP KW MBH COP KW MBH COP KW
60
60 38.0 3.7 3.01 37.2 3.6 3.00 36.4 3.6 2.98
70 37.5 3.5 3.18 36.9 3.4 3.17 36.4 3.4 3.15
80 37.0 3.2 3.34 36.7 3.2 3.33 36.4 3.2 3.32
47
60 34.7 3.5 2.87 34.0 3.5 2.87 33.3 3.4 2.86
70 34.1 3.3 3.01 33.7 3.3 2.99 33.3 3.3 3.00
80 33.6 3.1 3.14 33.5 3.1 3.16 33.3 3.1 3.18
40
60 32.3 3.4 2.75 32.0 3.4 2.78 31.7 3.3 2.80
70 31.5 3.2 2.88 31.4 3.2 2.91 31.4 3.1 2.94
80 30.6 3.0 3.00 30.9 3.0 3.04 31.1 3.0 3.08
30
60 28.4 3.2 2.59 28.5 3.2 2.63 28.7 3.1 2.68
70 27.3 3.0 2.69 27.8 3.0 2.74 28.3 3.0 2.79
80 26.1 2.7 2.79 27.0 2.8 2.85 27.9 2.8 2.91
17
60 21.8 2.7 2.37 22.9 2.7 2.44 24.0 2.8 2.51
70 21.1 2.5 2.46 22.3 2.6 2.53 23.4 2.6 2.60
80 17.6 2.1 2.47 18.8 2.2 2.55 20.1 2.2 2.63
10
60 21.2 2.6 2.36 20.7 2.5 2.43 20.3 2.4 2.51
70 18.2 2.2 2.38 18.0 2.1 2.46 17.8 2.1 2.53
80 15.2 1.9 2.40 15.3 1.8 2.48 15.3 1.8 2.56
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils MBH COP KW
–FC/MC/PC37 0.94 0.96 0.97
–FC/MC/PC43 0.94 0.96 0.97
–FC/MC/PC48 0.93 0.96 0.97
–UC48 0.95 0.99 0.96
AHE36C – 0.92 1.02 0.90
AHE42D – 0.91 1.03 0.89
AHR36B – 0.94 0.97 0.97
AHR42C – 0.93 0.98 0.95
AHV36C – 0.92 1.01 0.91
AHV42D – 0.91 1.03 0.89
AV*36 – 0.92 1.02 0.90
MV12B FC/MC43B 0.92 1.01 0.91
MV12D FC/MC48D 0.91 1.04 0.88
MV16C FC/MC43C 0.92 1.02 0.90
MV16C FC/MC48C 0.91 1.02 0.89
MX12B FC/MC43B 0.92 1.01 0.91
MX12D FC/MC48D 0.91 1.02 0.89
MX16C FC/MC43C 0.91 1.04 0.88
MX16C FC/MC48C 0.91 1.04 0.88
571209-YTG-C-1012
Johnson Controls Unitary Products 41
Furnaces Coils MBH COP KW
T*(8,L)V*A12 FC/MC/PC37A 0.93 0.98 0.95
T*(8,L)V*B12 FC/MC/PC43B 0.93 0.98 0.95
T*(8,L)V*C16 FC/MC/PC43C 0.92 1.01 0.91
T*(8,L)V*C16 FC/MC/PC48C 0.91 1.02 0.90
T*(8,L)V*C16 UC48C 0.93 1.05 0.89
T*(8,L)V*C20 FC/MC/PC43C 0.92 1.01 0.91
T*(8,L)V*C20 FC/MC/PC48C 0.91 1.02 0.89
T*(8,L)V*C20 UC48C 0.93 1.05 0.88
T*(8,L)X*A12 FC/MC/PC37A 0.93 1.02 0.91
T*(8,L)X*B12 FC/MC/PC43B 0.93 1.02 0.91
T*(8,L)X*C16 FC/MC/PC43C 0.91 1.04 0.88
T*(8,L)X*C16 FC/MC/PC48C 0.91 1.04 0.87
T*(8,L)X*C16 UC48C 0.93 1.07 0.86
T*(8,L)X*C20 FC/MC/PC43C 0.91 1.03 0.89
T*(8,L)X*C20 FC/MC/PC48C 0.93 1.05 0.88
T*(8,L)X*C20 UC48C 0.94 1.07 0.87
T*9(C,V)*B12 FC/MC/PC43B 0.93 0.98 0.95
T*9(C,V)*C16 FC/MC/PC43C 0.93 0.99 0.93
T*9(C,V)*C16 FC/MC/PC48C 0.92 1.01 0.91
T*9(C,V)*C16 UC48C 0.93 1.04 0.90
T*9(C,V)*C20 FC/MC/PC43C 0.92 1.01 0.91
T*9(C,V)*C20 FC/MC/PC48C 0.94 1.01 0.93
T*9(C,V)*C20 UC48C 0.95 1.04 0.91
T*9(C,V)*D20 FC/MC/PC48D 0.91 1.01 0.90
T*9(C,V)*D20 UC48D 0.93 1.04 0.89
T*9X*B12 FC/MC/PC43B 0.93 1.01 0.92
T*9X*C16 FC/MC/PC43C 0.92 1.02 0.90
T*9X*C16 FC/MC/PC48C 0.93 1.03 0.90
T*9X*C16 UC48C 0.94 1.06 0.88
T*9X*C20 FC/MC/PC43C 0.92 1.02 0.90
T*9X*C20 FC/MC/PC48C 0.91 1.02 0.90
T*9X*C20 UC48C 0.93 1.05 0.88
T*9X*D20 FC/MC/PC48D 0.91 1.02 0.89
T*9X*D20 UC48D 0.93 1.05 0.88
Y*(8,L)C*A12 FC/MC/PC37A 0.93 0.98 0.95
Y*(8,L)C*B12 FC/MC/PC43B 0.93 0.98 0.95
Y*(8,L)C*C16 FC/MC/PC43C 0.92 1.01 0.91
Y*(8,L)C*C16 FC/MC/PC48C 0.91 1.02 0.90
Y*(8,L)C*C16 UC48C 0.93 1.05 0.89
Y*(8,L)C*C20 FC/MC/PC43C 0.92 1.01 0.91
Y*(8,L)C*C20 FC/MC/PC48C 0.91 1.02 0.89
Y*(8,L)C*C20 UC48C 0.93 1.05 0.88
Y*9C*B12 FC/MC/PC43B 0.93 0.98 0.95
Y*9C*C16 FC/MC/PC43C 0.93 0.99 0.93
Y*9C*C16 FC/MC/PC48C 0.92 1.01 0.91
Y*9C*C16 UC48C 0.93 1.04 0.90
Y*9C*C20 FC/MC/PC43C 0.92 1.01 0.91
Y*9C*C20 FC/MC/PC48C 0.94 1.01 0.93
Y*9C*C20 UC48C 0.95 1.04 0.91
Y*9C*D20 FC/MC/PC48D 0.91 1.01 0.90
Y*9C*D20 UC48D 0.93 1.04 0.89
Furnaces Coils MBH COP KW
571209-YTG-C-1012
42 Johnson Controls Unitary Products
Multipliers for determining the performance with other indoor sections.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO YHJD42S41S4
EVAPORATOR COIL MODEL NO AHP48
AIR TEMP.
ENTERING
OUTDOOR UNIT
AIR TEMP.
ENTERING
INDOOR COIL
ID CFM
1200 1400 1600
MBH COP KW MBH COP KW MBH COP KW
60
60 45.9 4.2 3.23 45.2 4.1 3.20 44.6 4.1 3.18
70 44.7 3.8 3.42 44.5 3.8 3.40 44.4 3.8 3.39
80 43.5 3.5 3.61 43.8 3.6 3.60 44.1 3.6 3.58
47
60 41.8 4.2 2.92 41.5 4.0 3.07 41.2 3.7 3.22
70 40.8 3.9 3.09 40.3 3.7 3.19 39.8 3.5 3.35
80 39.7 3.6 3.27 39.1 3.4 3.35 38.4 3.3 3.43
40
60 39.0 4.0 2.85 38.6 3.8 2.98 38.2 3.6 3.12
70 37.7 3.7 3.00 37.1 3.5 3.13 36.5 3.3 3.25
80 36.3 3.4 3.15 35.5 3.2 3.27 34.8 3.0 3.39
30
60 34.9 3.7 2.73 34.0 3.5 2.85 33.2 3.3 2.97
70 32.6 3.4 2.85 31.7 3.1 2.95 30.8 3.0 3.06
80 30.3 3.0 2.96 29.4 2.8 3.06 28.5 2.6 3.16
17
60 26.6 3.0 2.64 25.8 2.8 2.71 25.0 2.6 2.79
70 22.6 2.6 2.60 21.9 2.4 2.69 21.2 2.2 2.77
80 20.3 2.2 2.67 19.7 2.1 2.77 19.1 1.9 2.87
10
60 20.9 2.5 2.47 20.1 2.3 2.57 19.3 2.1 2.66
70 18.7 2.2 2.50 18.0 2.0 2.60 17.4 1.9 2.70
80 16.4 1.9 2.52 15.9 1.8 2.63 15.4 1.7 2.73
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils MBH COP KW
–FC/MC/PC60 1.00 1.00 1.00
–UC60 1.02 1.03 0.99
AHE48D – 0.98 1.06 0.92
AHR48D – 1.00 0.99 1.01
AHV48D – 0.98 1.04 0.94
AV*48 – 0.98 1.06 0.93
AV*60 – 0.98 1.06 0.93
MV16C FC60C 0.99 1.04 0.95
MV20D FC/MC60D 0.99 1.05 0.95
MX16C FC60C 0.98 1.06 0.93
MX20D FC/MC60D 1.00 1.12 0.89
Furnaces Coils MBH COP KW
T*(8,L)V*C16 FC/PC60C 0.99 1.03 0.97
T*(8,L)V*C16 UC60C 1.00 1.06 0.94
T*(8,L)V*C20 FC/PC60C 0.99 1.04 0.95
T*(8,L)V*C20 UC60C 1.00 1.08 0.93
T*(8,L)X*C16 FC/PC60C 0.98 1.06 0.93
T*(8,L)X*C16 UC60C 0.99 1.10 0.90
T*(8,L)X*C20 FC/PC60C 1.02 1.11 0.91
T*(8,L)X*C20 UC60C 1.02 1.10 0.93
T*9(C,V)*C16 FC/PC60C 1.00 1.01 1.00
T*9(C,V)*C16 UC60C 1.02 1.04 0.98
T*9(C,V)*C20 FC/PC60C 0.99 1.02 0.97
T*9(C,V)*C20 UC60C 1.02 1.05 0.97
T*9(C,V)*D20 FC/MC/PC60D 0.99 1.03 0.97
T*9(C,V)*D20 UC60D 1.00 1.06 0.95
T*9X*C16 FC/PC60C 1.02 1.09 0.93
T*9X*C16 UC60C 1.00 1.07 0.94
T*9X*C20 FC/PC60C 1.02 1.11 0.92
T*9X*C20 UC60C 1.00 1.08 0.93
T*9X*D20 FC/MC/PC60D 1.02 1.12 0.90
T*9X*D20 UC60D 1.00 1.11 0.91
Y*(8,L)C*C16 FC/PC60C 0.99 1.03 0.97
Y*(8,L)C*C16 UC60C 1.00 1.06 0.94
Y*(8,L)C*C20 FC/PC60C 0.99 1.04 0.95
Y*(8,L)C*C20 UC60C 1.00 1.08 0.93
Y*9C*C16 FC/PC60C 1.00 1.01 1.00
Y*9C*C16 UC60C 1.02 1.04 0.98
Y*9C*C20 FC/PC60C 0.99 1.02 0.97
Y*9C*C20 UC60C 1.02 1.05 0.97
Y*9C*D20 FC/MC/PC60D 0.99 1.03 0.97
Y*9C*D20 UC60D 1.00 1.06 0.95
Furnaces Coils MBH COP KW
571209-YTG-C-1012
Johnson Controls Unitary Products 43
Multipliers for determining the performance with other indoor sections.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO YHJD48S41S4
EVAPORATOR COIL MODEL NO AHP48
AIR TEMP.
ENTERING
OUTDOOR UNIT
AIR TEMP.
ENTERING
INDOOR COIL
ID CFM
1400 1600 1800
MBH COP KW MBH COP KW MBH COP KW
60
60 53.4 3.7 4.17 53.2 3.7 4.17 53.1 3.7 4.16
70 51.9 3.5 4.32 52.0 3.5 4.31 52.2 3.6 4.30
80 50.4 3.3 4.45 50.8 3.3 4.46 51.3 3.4 4.46
47
60 46.3 3.6 3.75 46.6 3.6 3.77 46.9 3.6 3.78
70 46.5 3.7 3.71 46.0 3.5 3.85 45.5 3.4 3.97
80 46.7 3.7 3.68 45.4 3.5 3.84 44.2 3.2 4.01
40
60 42.6 3.5 3.52 42.8 3.5 3.55 43.0 3.5 3.58
70 39.8 3.3 3.57 40.3 3.3 3.61 40.8 3.3 3.65
80 37.0 3.0 3.63 37.8 3.0 3.68 38.7 3.0 3.72
30
60 32.1 3.1 3.04 33.2 3.1 3.12 34.4 3.1 3.21
70 31.7 2.9 3.16 32.7 3.0 3.24 33.7 3.0 3.31
80 31.4 2.8 3.29 32.2 2.8 3.36 32.9 2.8 3.42
17
60 27.2 2.8 2.82 28.1 2.9 2.88 29.0 2.9 2.95
70 26.6 2.7 2.89 27.6 2.7 2.98 28.5 2.7 3.07
80 24.2 2.4 2.96 25.1 2.4 3.05 26.1 2.4 3.14
10
60 23.1 2.6 2.62 24.4 2.6 2.72 25.7 2.7 2.83
70 21.7 2.3 2.71 22.7 2.4 2.81 23.7 2.4 2.91
80 20.3 2.1 2.80 21.1 2.1 2.90 21.8 2.1 2.99
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils MBH COP KW
–FC/MC/PC60 1.00 1.00 1.00
–FC/MC62 0.99 1.01 0.98
–UC60 1.00 1.02 0.98
AHE48D – 0.98 1.06 0.92
AHE60D – 0.97 1.06 0.91
AHR48D – 0.97 0.98 0.98
AHR60D – 0.99 1.01 0.98
AHV48D – 0.97 1.02 0.95
AHV60D – 0.98 1.03 0.95
AV*48 – 0.98 1.07 0.92
AV*60 – 0.98 1.07 0.91
MV16C FC60C 0.98 1.06 0.93
MV20D FC/MC60D 0.98 1.06 0.93
MV20D FC/MC62D 0.98 1.06 0.93
MX16C FC60C 0.98 1.09 0.90
MX20D FC/MC60D 0.97 1.09 0.89
MX20D FC/MC62D 0.98 1.08 0.91
Furnaces Coils MBH COP KW
T*(8,L)V*C16 FC/MC62D 0.99 1.03 0.96
T*(8,L)V*C16 FC/PC60C 0.99 1.03 0.96
T*(8,L)V*C16 UC60C 0.99 1.03 0.96
T*(8,L)V*C20 FC/MC62D 0.99 1.04 0.95
T*(8,L)V*C20 FC/PC60C 0.99 1.04 0.95
T*(8,L)V*C20 UC60C 0.99 1.05 0.95
T*(8,L)X*C16 FC/MC62D 0.98 1.05 0.94
T*(8,L)X*C16 FC/PC60C 0.98 1.06 0.93
T*(8,L)X*C16 UC60C 0.99 1.05 0.95
T*(8,L)X*C20 FC/MC62D 0.98 1.05 0.93
T*(8,L)X*C20 FC/PC60C 0.98 1.06 0.92
T*(8,L)X*C20 UC60C 0.97 1.09 0.89
T*9(C,V)*C16 FC/MC62D 0.99 1.03 0.96
T*9(C,V)*C16 FC/PC60C 0.99 1.03 0.96
T*9(C,V)*C16 UC60C 0.99 1.02 0.97
T*9(C,V)*C20 FC/MC62D 0.99 1.02 0.97
T*9(C,V)*C20 FC/PC60C 0.99 1.03 0.96
T*9(C,V)*C20 UC60C 0.99 1.02 0.97
T*9(C,V)*D20 FC/MC/PC60D 0.99 1.04 0.95
T*9(C,V)*D20 FC/MC62D 0.99 1.02 0.97
T*9(C,V)*D20 UC60D 0.99 1.03 0.96
T*9X*C16 FC/MC62D 0.99 1.04 0.95
T*9X*C16 FC/PC60C 0.98 1.05 0.93
T*9X*C16 UC60C 0.99 1.05 0.95
T*9X*C20 FC/MC62D 0.98 1.05 0.93
T*9X*C20 FC/PC60C 0.98 1.06 0.92
T*9X*C20 UC60C 0.98 1.06 0.93
T*9X*D20 FC/MC/PC60D 0.97 1.09 0.89
T*9X*D20 FC/MC62D 0.99 1.04 0.95
T*9X*D20 UC60D 0.97 1.07 0.90
Y*(8,L)C*C16 FC/MC62D 0.99 1.03 0.96
Y*(8,L)C*C16 FC/PC60C 0.99 1.03 0.96
Y*(8,L)C*C16 UC60C 0.99 1.03 0.96
Y*(8,L)C*C20 FC/MC62D 0.99 1.04 0.95
Y*(8,L)C*C20 FC/PC60C 0.99 1.04 0.95
Y*(8,L)C*C20 UC60C 0.99 1.05 0.95
Y*9C*C16 FC/MC62D 0.99 1.03 0.96
Y*9C*C16 FC/PC60C 0.99 1.03 0.96
Y*9C*C16 UC60C 0.99 1.02 0.97
Y*9C*C20 FC/MC62D 0.99 1.02 0.97
Y*9C*C20 FC/PC60C 0.99 1.03 0.96
Y*9C*C20 UC60C 0.99 1.02 0.97
Y*9C*D20 FC/MC/PC60D 0.99 1.04 0.95
Y*9C*D20 FC/MC62D 0.99 1.02 0.97
Y*9C*D20 UC60D 0.99 1.03 0.96
Furnaces Coils MBH COP KW
Subject to change without notice. Published in U.S.A. 571209-YTG-C-1012
Copyright © 2012 by Johnson Controls, Inc. All rights reserved. Supersedes: 571209-YTG-B-1211
Johnson Controls Unitary Products
5005 York Drive
Norman, OK 73069
Multipliers for determining the performance with other indoor sections.
HEATING PERFORMANCE DATA
CONDENSING UNIT MODEL NO YHJD60S41S5
EVAPORATOR COIL MODEL NO FC/MC62
AIR TEMP.
ENTERING
OUTDOOR UNIT
AIR TEMP.
ENTERING
INDOOR COIL
ID CFM
1600 1800 2000
MBH COP KW MBH COP KW MBH COP KW
60
60 72.1 3.8 5.62 71.1 3.8 5.53 70.1 3.8 5.42
70 70.9 3.4 6.11 70.6 3.4 6.02 70.3 3.5 5.90
80 69.8 3.1 6.62 70.2 3.2 6.50 70.5 3.2 6.40
47
60 62.7 3.7 4.99 62.4 3.7 4.95 62.1 3.7 4.90
70 61.1 3.3 5.43 61.1 3.5 5.09 61.1 3.8 4.76
80 59.6 3.0 5.86 59.9 3.4 5.23 60.1 3.8 4.61
40
60 55.6 3.5 4.63 55.9 3.6 4.62 56.2 3.6 4.60
70 54.3 3.1 5.06 54.5 3.2 5.04 54.8 3.2 5.00
80 52.9 2.8 5.50 53.1 2.9 5.46 53.3 2.9 5.40
30
60 45.3 3.2 4.20 45.7 3.2 4.20 46.1 3.2 4.21
70 43.9 2.9 4.51 44.3 2.9 4.53 44.8 2.9 4.54
80 42.4 2.6 4.82 43.0 2.6 4.86 43.5 2.6 4.90
17
60 38.0 2.8 3.93 38.5 2.9 3.96 39.1 2.9 4.00
70 35.5 2.5 4.19 36.5 2.5 4.24 37.5 2.6 4.31
80 33.0 2.2 4.47 34.4 2.2 4.53 35.9 2.3 4.61
10
60 32.3 2.6 3.71 32.8 2.6 3.74 33.3 2.6 3.75
70 31.3 2.3 4.04 31.5 2.3 4.05 31.8 2.3 4.08
80 30.3 2.0 4.35 30.2 2.0 4.36 30.2 2.0 4.38
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Air Handlers Coils MBH COP KW
–FC/MC62 1.00 1.00 1.00
–FC64 1.03 0.95 1.08
AHE60D – 0.99 1.01 0.98
AHR60D – 1.01 0.98 1.04
AHV60D – 0.99 0.97 1.02
MV20D FC/MC62D 1.00 1.00 1.00
MV20D FC64D 1.01 0.97 1.05
MX20D FC/MC62D 0.99 1.02 0.97
MX20D FC64D 1.00 0.98 1.02
Furnaces Coils MBH COP KW
T*(8,L)V*C20 FC/MC62D 0.99 0.96 1.03
T*(8,L)V*C20 FC64D 1.01 0.95 1.06
T*(8,L)X*C20 FC/MC62D 0.98 0.98 1.00
T*(8,L)X*C20 FC64D 1.00 0.95 1.05
T*9(C,V)*C20 FC64D 1.01 0.94 1.07
T*9(C,V)*D20 FC/MC62D 0.99 0.96 1.03
T*9(C,V)*D20 FC64D 1.01 0.94 1.07
T*9X*C20 FC/MC62D 0.98 0.98 1.00
T*9X*C20 FC64D 1.01 0.94 1.07
T*9X*D20 FC/MC62D 0.98 0.97 1.01
T*9X*D20 FC64D 1.01 0.95 1.05
Y*(8,L)C*C20 FC/MC62D 0.99 0.96 1.03
Y*(8,L)C*C20 FC64D 1.01 0.95 1.06
Y*9C*C20 FC/MC62D 0.99 0.95 1.04
Y*9C*C20 FC/MC62D 0.99 0.95 1.04
Y*9C*C20 FC64D 1.01 0.94 1.08
Y*9C*D20 FC/MC62D 0.99 0.96 1.03
Y*9C*D20 FC64D 1.01 0.94 1.07

Navigation menu