Youngs Watch MD15367 Bluetooth Smart Watch User Manual 16708 YPM MD16385 101x75P46 Youngs E

Youngs Watch Co., Ltd. Bluetooth Smart Watch 16708 YPM MD16385 101x75P46 Youngs E

User Manual

Download: Youngs Watch MD15367 Bluetooth Smart Watch User Manual 16708 YPM MD16385  101x75P46 Youngs E
Mirror Download [FCC.gov]Youngs Watch MD15367 Bluetooth Smart Watch User Manual 16708 YPM MD16385  101x75P46 Youngs E
Document ID3178381
Application IDH0ImmNWEV4jQ3alRy9g85g==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize325.18kB (4064812 bits)
Date Submitted2016-10-28 00:00:00
Date Available2016-10-29 00:00:00
Creation Date2016-10-18 10:04:35
Producing SoftwareCorel PDF Engine Version 9.397
Document Lastmod2016-10-18 10:04:35
Document Title16708-YPM(MD16385)-101x75P46-Youngs-E
Document CreatorCorelDRAW Version 9.397
Document Author: HTD

BUTTONS
Sleep
Pedometer
A P P I N S TA L L
The operation of buttons are indicated by using the letters shown
in the illustration.
Message Notice
Call Notice
3. Click finish back to phone desktop, after finished the APP installation.
APP Install For Android System
1. Use mobile phone log in https://play.google.com/store (searching on google
play, find "Youngswatch" APP then follow the instructions to install on you
mobile phone), if you mobile phone already installed "360 assistant" you can
directly search "Youngswatch", then you can install the APP prompt.
Sedentary Notice
Sync Time
A P P PA I R I N G
"D"
Chart A
Back to
the main
menu
A -- S et / Reset
"B"
SOS
SOS
Vibration
Notification access
Click ok
Click install
Click
confirm
Share
BACKLIGHT
EL Backlight
EL (electro-luminescent) is used as backlight to glow for easy reading
in the dark.
Stopwatch
Alarm
Chime
Click Youngs
watch.apk
Click next
50
11
Use EL Backlight
The alarm sounds at the
preset time each day.
Installing...
Click connect watch
Notification
access
iPhone system:
iOS7.0 or above of iPhone 5/5s/6/6s...
Click start Guide page3
Guide page2
After 2s
Next page
Next page
BLE off state
Setting menu
Main menu
Press and
hold key "D"
"Hold" flashing
5. When the watch is connected with the phone, all icons are displayed in
color in the APP main menu.
Before using APP, please ensure the mobile phone and watch are already
connected normally.
Link
USER
The sports data
from last month
Sports interface
3. In the timekeeping mode BLE off state, press and hold "D" to turn on the
watch bluetooth function( "Link" will be displayed);
Chart A --- Interface for time setting, controlling camera thru BT, watch
locator & other functions.
Chart B --- For browsing sports data.
Chart C --- For browsing sleeping data.
Chart D --- For changing sports parameters & setting the sleep monitoring
& sedentary reminder
In the APP sleeping interface, the user can browse intraday deep sleep
time, shallow sleep time, sleep quality and other data(for a single sleep
time less than 2 hours, no sleep statistical data will be recorded).
In the APP sleeping interface, user can browse the historical data
(including the daily and monthly sleeping data).
Sleep Level: very good, good, general, poor, very poor.
When mobile phone and watch are in normal connection state, clicking
"synchronization" button, the APP data will synchronize with the
watch(sync the latest 7 days sleep data with the watch); click "Share"
button, user can share the sleep data to QQ, WeChat, Facebook......
For watch sleeping monitor parameter setting, see Page12.
10
PEDOMETER
4. Press "C" or "D" to turn ON/OFF
the Daylight Saving Time.
In the BLE on state, press and
hold "D" to turn off bluetooth
function.
In the BLE off state, press and
hold "D" to turn on bluetooth
function.
Select
SOS
In the BLE on state, press and hold
"B" to perform SOS function.
FIND
Setting
In the user mode, press "A" to
select USER, FIND, CAMERA
function.
1. In the user state, press and hold
"A" until the icon "
flash (flashing is indicated in the
setting mode);
Turn ON/OFF The Pedometer
In the pedometer mode, press
"A" to turn on/off the pedometer.
In the FIND state, press and hold
"D" to perform watch find mobile
phone function (See page18).
Setting
Recall
1. In the pedometer mode, press
and hold "A" until the goal of
step to flash (flashing indicated in
setting mode);
4. Press "C" or "D" to switch the sex
between male and female;
The sleeping data
from last month
Sleeping interface
In the APP sports interface, the user can browse the intraday steps,
distance, calories consumption and time.
In the APP sports interface, the user can browse historical data
(including the daily and monthly sports data).
When mobile phone and watch are in normal connection state, clicking
"synchronization" button, the APP data will synchronize with the
watch (sync the latest 7 days sports data with the watch); click "Share"
button, user can share the sports data to QQ, WeChat, Facebook......
For more details of watch sports parameter setting, see Pages11or 30.
In the pedometer mode, press "D"
to browse the information in the
following sequence:
Step distance speed calories
time of walking/running.
In the record mode, press"A" to
browse the selection in the
following sequence:
total record record1~record7.
Total distance
5. Repeat steps 3 and 4, the
selection in the following
sequence:
City code Daylight Saving Time
Seconds Hour Minutes
12/24H Format Year Month
Date Key Tone(ON/OFF);
1/100 second unit;
Measuring range:
0'00"00 ~ 99:59'59".
2. Press "C" or "D" to select the city
code, press and hold to adjust at
high speed;
6. Press "A" to exit the set
state after setting (The day
of week is automatically
displayed in accordance with
year, month and date setting).
COUNTDOWN
Countdown timer range:
99:59'59" ~ 0'00"00.
BLE on state
(Timekeeping mode)
Press and hold
key "D"
Press and hold
key "D"
Time of walking/running
BLE on state
(Timekeeping mode)
USER
Press and hold
key "B"
5. Press "C" or "D" to turn ON/OFF
the PS function (PS ON/OFF).
Press key "A"
"Hold" flashing
"Hold" flashing
FIND
After 2s
After 2s
After 2s
Press key "A"
5. Repeat steps 3 and 4, the
selection in the following
sequence:
The goal of step Sex Age
Metric/Imperial Height
Weight Distance of Walk
Distance of Run;
Select the type of pedometer
In the pedometer on state,
press and hold "B" switch to
the type of pedometer.
CAMERA
"Hold" flashing
2. Press "D" to select the remind
methods in the following
sequence:
buzzing vibration buzzing+
vibration
silent;
2s
WORLD TIME
When the digital time and hands
time not the same, please conduct
the hands calibration function
(See page39).
The time for other time zone.
24
25
When the watch bluetooth is on,
please refer to page5~7 for the
pairing method.
When the watch bluetooth is off,
the SOS is disabled.
6. Press "A" to exit the set state
after setting.
Press and hold
key "B"
The icon "
" is displayed after
the watch pairing is successful.
For SOS number setting see
Page17.
26
27
PS---Power Saving.
Four methods of reminder setting:
buzzing, vibration, buzzing+
vibration, silent.
The goal of step range:
1000~100000.
Age range: 07~99.
Height range: 90~221cm,
35~87inch.
Weight range: 20~200kg,
44~440lbs.
Distance of walk&run:
30~180cm, 4~118inch.
28
Running
When the watch bluetooth is off,
the SOS and camera are
disabled.
Sports type:
walking and running.
29
W-Time --- Walking Time;
R-Time --- Running Time.
The Parameter Setting Range
Clear data
Press and hold
After 2s
key "C"
30
2. Press "D" to increase the hour,
press "C" to decrease the hour,
press and hold to adjust at high
speed;
Press key "D"
Please turn off the pedometer
to save power if you do not use
the pedometer.
When the mobile phone and watch
are in normal connection state,
click APP "sync" button to browse
the updated data(see Page9).
Calories
31
Setting the sedentary on and off as well as time is the same method used
in the height function (see Page11).
When the watch bluetooth function is off, it cannot set the sedentary
on and off as well as time for the watch.
When the watch sedentary reminder setting is "ON", the watch will display
" icon.
2. Press "A" to display the split
time, stopwatch timing
continues internally;
1. In the stopwatch mode, press "D"
to start the stopwatch;
Decline
Call rejection only available for android system, iOS do not support
this feature.
In the APP main menu state, click the
notice (In gray means the function is off).
3. Press "B" to select the minutes;
2. To stop the stopwatch, press
"D" again;
Press key "D"
In the total record state, press "D"
to browse the information in the
following sequence:
Total step total distance total
calories total time of walking&
running.
In the record1~record7 state,
press and hold "C" for 2s ( "Hold+
Clear" flashing), clear the current
record and return to total record
(the total record no change).
Press key "D"
Total time of walking & running
In the record1 state, press "D"
to browse the information in the
following sequence:
Step distance calories
time of walking/running.
Total record
Press key "D"
In the total record state, press
and hold "C" 2s ("Hold+Clear"
flashing), will reset all the data.
Calories
4. Press "D" to increase the
minutes, Press "C" to decrease
the minutes, press and hold to
adjust at high speed;
Alarm Time Setting
1. In the alarm state, press and
hold "A" until the hour will flash,
the indicator "
" appears
(flashing is indicated in the
setting mode);
WORLD TIME
1. In the world time mode, press "D"
to forward select the time zone,
press "C" to backward select the
time zone, press and hold to
adjust at high speed;
Use Countdown Timer
1. Press "D" to start the countdown
timer;
5. Press "A" to exit the set state
after setting.
Total step
Press key "D"
Press key "D"
Next page
32
Time of walking/running
Split Time
5. Repeat steps 3 and 4, the
selection in the following
sequence:
Hour
Minutes Seconds;
2. Press "D" to increase the hour,
press "C" to decrease the hour,
press and hold to adjust at high
speed;
3. Press "A" to reset the stopwatch.
6. Press "A" to exit the set state
after setting.
5. Press "D" to stop the stopwatch;
1. In the stopwatch mode, press "D"
to start the stopwatch;
The pedometer automatically
store a record for more than
one minute walking when the
date is updated.
The way to recall record1~record7
is the same.
33
34
35
36
37
Click SOS
After the beyond safe range reminder, if user is back to safe range within
1~2 minutes, the watch will automatically re-connect with mobile
phone.
Timekeeping mode
Click Youngswatch
The watch after safe range remind state & back to safe range within 1
minute, it will automatically re-connect with mobile phone (See page20).
SOS Use
In the timekeeping mode, press and hold "B" to activate the SOS function,
the mobile phone will automatically call SOS number.
Event Notice
After 10s
After a few
seconds
icon to turn on/off the event
City
GMT
Differential
WLG
Wellington
+12
Suva, Christchurch, Nauru Island, Nadi
NOU
Noumea
+11
Port vila
SYD
Sydney
+10
Guam, Vladivostok
Other major cities in same time zone
TYO
Tokyo
+09
Seoul, Pyongyang
HKG
Hong Kong
+08
Singapore, Kuala Lumpur, Beijing, Taipei, Manila
BKK
Bangkok
+07
Jakarta, Phnom Penh, Hanoi, Vientiane
DAC
Dhaka
+06
Novosibirsk, Colombo
KHI
Karachi
+05
Male
DXB
Dubai
+04
Abu Dhabi, Muscat
JED
Jeddah
+03
Moscow, Addis Ababa, Aden
CAI
Cairo
+02
Cape Town , Sofia, Athens, Helsinki, Istanbul
PAR
Paris
+01
Milan, Rome, Amsterdam, Madrid, Algiers
LON
London
+00
(UTC), Lisbon, Casablanca, Reykjavik
RAI
Praia
-01
Praia
FEN
Fernando de
Noronha
-02
Fernando de Noronha
RIO
Rio de Janeiro
-03
Buenos Aires, M ontevideo
SCL
Santiago
-04
La Paz, Port Of Spain
NYC
New York
-05
Montreal, Detroit, Miami, Boston, Panama City
CHI
Chicago
-06
Houston, Dallas/Fort Worth, New Orleans
After 2s
Press and
hold key "D"
Timekeeping mode
Done
The watch time will synchronize with mobile phone time after completing
bluetooth time calibration.
"Hold" flashing
" flashing
Camera
18
LOW POWER
1. In the APP main menu state, click the
" will appear to
button to enter setting menu;
W AR N I N G
When user is unable to connect bluetooth function, please follow the steps
below to re-pair the watch and mobile phone.
2. In the setting menu state, click Align Needles;
1. To enter mobile phone setting menu, check the bluetooth function is
on or not;
3, Adjust the time in compliance with time of hands, click Confirm ;
2. At mobile phone bluetooth menu state , un-pair "ALL" paired device;
3. Click Youngswatch APP, in the APP main menu state, click "setting\
disconnection" to clear current connection;
Increase
the number
Minimising Possible Risks In Exercising
Before starting a regular exercise program you are recommended to
answer to the following questions for health status checking. If the answer
is YES to any of the questions, we recommend to consult a doctor before
starting an exercise.
Do you have high blood pressure?
Do you have high blood cholesterol?
Coin can be used to open the battery hatch and change with the
same battery specification.
Adjust the time
4, The watch will automatically adjust the time according to hands.
It is important to be sensitive to your body's reactions during exercise.
If you feel unexpected pain or excessive fatigue when exercising, it is
recommended to stop the exercise or continue at a lighter intensity.
Click setting
Press "A" exit to timekeeping mode when the watch 12 o'clock flashing
DEN
Denver
-07
Phoenix, Edmonton, Chihuahua
LAX
Los Angeles
-08
San Francisco, Las Vegas, Vancouver, Seattle
ANC
Anchorage
-09
Nome
After hands calibration , please synchronize time with phone(See page16) .
HNL
Honolulu
-10
Papeete
PPG
Pago Pago
-11
Pago Pago
In the hands calibration state, user input the time in compliance with time
of hands on APP, the current time setting see page25.
Timekeeping mode Adjust the time
Confirm
39
Click disconnect
Click ok
4. In the user mode USER state (when the watch bluetooth function is off),
press and hold "D" to clear historical connection(clear the
display "
" );
Press and
hold key "D"
Timekeeping mode
You may need to hands calibration of the watch(See Page39) after
change battery.
40
When the watch icon "
" is flashing, press any button to stop it (the
watch bluetooth function will automatically turn off ).
Connect succeed
The watch bluetooth function will automatically turn off after entering
power save mode, the mobile phone and watch will automatically
disconnect to save battery power.
At the watch bluetooth function off state, phone, message, e-mail, event
reminder and other functions are disabled.
For receiving reminder of phone call, message, e-mail, event and others
on time, user can turn off the PS function (See page28), please be
reminded it will consume more battery power (shorten battery life).
20
Step range: 0~999999;
Sports type: walking and running
At the watch bluetooth function off state, phone, message, e-mail,
event reminder and other functions are disabled, user need to turn
on the watch bluetooth function manually to connect with mobile
phone again(See page6~7).
21
22
RECORD
7 Records (Record1~Record7);
Auto storage record.
23
FCC STATEMENT
The screen shown in below:
Sleep
Buletooth Walk
Run
Sedentary
Vibration
Daylight saving time
Buzzer
Hour
Minutes
Low power indicator
Alarm
Chime
Seconds
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Date
Day of week
Event Notice
Call Notice
Message Notice
Reorient or relocate the receiving antenna.
E-Mail Notice
After 2s
User mode
"Hold+Clear" flashing
5. Please re-pair APP(See Page 5~7).
41
Clear connection
ATTENTION
1. Never try to open the case or remove its back cover.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
2. Do not operate buttons underwater.
Otherwise during the exercise, note walking slowly, going along the
brae up and down, walking in the crowded place, standing and sitting
again and again, playing ball, up and down sporting without normal
walking will affect normal step counting, it is not a sign of watch
malfunction .
This watch belongs to the general sports and sleeping measure level
meter & does not necessarily replace precision measurement equipment.
Adjust chieve
"12:00" flashing
" flashing)
PEDOMETER
Increase the separation between the equipment and receiver.
Coin
Caseback of the
watch sketch
FIND, Camera.
Do you have symptoms of any disease?
Are you recovering from a serious illness or medical treatment?
Click Align Ne edles
USER
D I S P L AY
Exercise may include some risk, especially for those who have been
sedentary.
Have you not exercised for the past 5 years?
Change Battery
Decrease
the number
Remote photo shooting
In the re-connecting state, the watch will automatically connect with the
mobile phone several times, it will automatically close bluetooth function
after 1 minute if still unable to connect with the watch.
Timekeeping
19
TROUBLE SHOOTING
If the battery voltage level is insufficient, the icon "
remind to replace a new battery.
The watch and mobile phone are in normal connection state, if short time
disconnections will be encountered (maybe caused by environmental
interference or other causes), this does not mean that there is something
wrong with the watch, after a few seconds the watch will automatically
re-connect with mobile phone.
After 2s
Timekeeping mode
Connect succeed
The watch find
mobile phone
"Hold" flashing
FIND state
17
Please ensure the digital time and hands at same time before using this
watch, when they are not the same, please conduct the hands calibration
function.
Click settings
Safe range remind
After 2s
Activate the SOS function
SOS only available for android system, iOS system do not support this
feature.
100 years Calendar(2000 ~ 2099).
After a few
seconds
The watch will alarm and/or vibrate to remind user( "
when the mobile phone bluetooth function is turned off .
After 10s
Press key "A"
38
3. In the user mode camera state, press "D" to perform remote photo
shooting function.
Press key "D"
HANDS CALIBRATION
World Time Form
In the user mode FIND state, press and hold "D" to perform the watch find
mobile phone function, the mobile phone will alarm and/or vibrate to
remind user.
Hour, Minutes, Seconds, Year,
Month, Date, Day of week;
12/24H Format;
The Watch Find Mobile Phone
After 2s
Press and
hold key "B"
16
City code
After 2s
Timekeeping mode
In the APP main menu state, click the
notice (In gray means the function is off).
Timekeeping
After 2s
2. Aim the camera through the phone screen to take photo;
TIMEKEEPING
Moving the
watch after
1 minute
Moving
the watch
PS mode
Back to
safe range
Press "B" to change the mode in the following sequence:
Timekeeping Mode
User Mode
Pedometer Mode
Record Mode
Alarm Mode
Stopwatch Mode
Countdown Timer Mode
World
Time Mode.
Input SOS phone number
Click sync time
icon to turn on/off the E-mail
3. The watch will automatically go back to timekeeping mode after
bluetooth time calibration is finished.
2.To pause, press "D" again.
2. In the world time mode, press
and hold "A" to turn ON/OFF
the Daylight Saving Time.
Press key "D"
The latest day exercise record is
record1 (R01).
Record1
4. Press "D" to increase the
number, press "C" to decrease
the number, press and hold to
adjust at high speed;
The watch will automatically re-connect with mobile phone after PS wake
up (See page21).
When PS setting is on, the mobile phone and
watch are in normal connection state, if no
watch activity happens within 10 minutes,
it will automatically enter to power saving mode
( "PS" displayed).
When watch is in PS mode , it will automatically go back to timekeeping
mode, the watch will automatically wake up if an activity happens within 1
minute (the watch will automatically re-connect with mobile phone).
After 10s
The mobile phone
find watch
15
3. Press "A" to reset the stopwatch.
4. Repeat steps 2 and 3, you can
measure the multi split time;
Timezone setting
"AT" flashing
Record mode
Distance
When the distance between watch and mobile phone is beyond the safe
range(around 6 meters), the watch will alarm and/or vibrate to remind
user( "
" flashing).
Wake up PS
Click settings
In the APP main menu state, click the
notice (In gray means the function is off).
Message Notice
1. In the countdown mode, press
and hold "A" until the hour will
flash (flashing is indicated in the
setting mode);
icon to enter picture taking
Click camera
14
3. Press "B" to select the next
selection;
In the APP main menu state, click
icon to perform the mobile
phone find watch function, the watch will alarm and/or vibrate to
remind user.
1. In the App main menu state, click
screen;
Sync time
After Youngswatch APP event setup, when the event time is up, the watch
will alarm and/or vibrate to remind user, at the same time the watch icon
" will be flashing, press any button to stop it.
Countdown Timer Setting
In the alarm mode, press "D" to
turn on/off the alarm and chime
in the following sequences:
Alarm & Chime off
Alarm on
Chime on
Alarm & Chime on.
When having new E-mail on phone, the watch will alarm and/or vibrate
to remind user, at the same time the watch icon "
" will be flashing,
press any button to stop it.
icon to turn on/off the call
When having new message on phone, the watch will alarm and/or vibrate
to remind user, at the same time the watch icon "
" will be flashing,
press any button to stop it.
MODE SELECTION
Power saving setting(See page28).
With caller ID
in contacts
For callers not in contacts, the watch will display the telephone number
while for those from contacts, the watch will display phone's address
book name(only english name).
COUNTDOWN
When the countdown timer reaches
zero, the alarm beeps for about 10
seconds, press any button to
stop it.
icon to enter setting menu.
2. In the setting menu state, click SOS to set the phone number.
RE-CONNECT
Enter PS
The Mobile Phone Find Watch
1. In the APP main menu state, click the
2. In the bluetooth time calibration menu state, click sync time, the watch
time will synchronize with mobile phone;
Click set clock
13
STOPWATCH
A Lap Time
The setup is successful
3. Press "A" to clear the split
time and to continue time
measurement;
When a user continuous walking
/running movement after 10
steps, the watch will record
cumulative step.
Speed
Timekeeping mode
When the sleeping monitor setting is "on", the watch will monitor user's
sleeping quality every day.
Can browse the sleeping time and quality by APP (see Page10).
The pedometer function will be automatically off when the sleeping
monitor setting is "on"(the icon"
" is displayed).
For watch sleeping monitor default is off.
Total calories
When the user reach the set target
steps, the watch will beep for about
10 seconds ("GOAL" flashing),
press any button to stop it.
Walking
CAMERA
3. Press "C" to select the remind
methods in the following
sequence:
buzzing vibration buzzing+
vibration
silent;
In the pedometer mode, press
and hold "C" 2s ("Hold+Clear"
flashing), reset the data (the
total data no change).
Press key "D"
3. Press "B" to select the sex;
SOS
2s
Distance
In the camera state, press "D" to
perform remote photo shooting
function(See page19).
3. Press "B" to select the Daylight
Saving Time;
BLE off
Recall
Clear data
The operation to set the height is the same as setting the sleeping time
on and off (see Page11).
When the watch bluetooth function is off, it can not set the sleeping time ,
on and off for the watch.
When the sleeping monitor setting is "on", & the current time within
sleeping monitor time, the watch will display "
" icon, it will
monitor the user sleeping quality;
if the current time is out of sleeping monitor time or the sleeping monitor
setting is "off", the watch icon "
" will not be displayed.
12
ALARM
No caller ID
in contacts
After 2s
The setup is successful
Alarm And Chime
Step
Press key "D"
Timekeeping mode
SOS Setting
The requirement of E-mail address:
Gmail, yahoo e-mail for android system, iCloud e-mail for iOS system.
Calling
Click the APP
of "confirm"
button
When the watch bluetooth function is off, it cannot set the step
parameter by APP, the user can enter pedometer mode to set the
sports parameter (see Page30).
Step
6. Press "A" to exit the set state
after setting.
2. Press "C" or "D" to set the goal
of step;
After 3s
Link cartoon
Click the APP
of "confirm"
button
icon to enter bluetooth time
Press
any button
Setting up sedentary reminder
When the watch display "Done", it means the
sedentary reminder setting is finished
After 2s
In this function we can set the age, weight, target steps, tracks the
distance, the same method used in the height function.
When there is an incoming call, the watch will alarm and/or vibrate to
remind user, at the same time the watch icon "
+ CALL" will be
flashing ("Rolling displayCaller ID and phone's address book") pressing
any button will reject the call.
Press key "D"
Press key "D"
BLE off state
(Timekeeping mode)
Setting up sleep monitor
1. In the APP main menu state, click the
calibration menu;
POWER SAVING
SAFE RANGE REMIND
CAMERA
F I N D
E-mail Notice
Setting up sleep monitor
When the watch display "Done", it means the
sleeping monitor setting is finished
The setup is successful
The alarm beeps about 10
seconds at the preset time each
day, press any button to stop it.
Clear
Clear Data
STOPWATCH
Timekeeping mode
Continued from
previous page
Select
4. Press "B" to select the PS;
Click "confirm" button, the
parameter setting of the
watch user will coincide
with the APP
11
RECORD
Press key "D"
Turn OFF The Bluetooth
Click
confirm
icon to turn on/off the message
" will be flashing, press
Sedentary switch
Setting the sedentary
on and off time
Click the APP
of "confirm"
button
Sliding
phone
screen
to left
Scanning...
Turn ON The Bluetooth
Click here, the APP data
will synchronize with the
watch data
Click
here
Next page
Bluetooth version: BLE4.0 or above.
TIMEKEEPING
1. In the timekeeping mode, press
and hold "A" until the city code
will flash(flashing is indicated in
the setting mode);
Chime;
Share
Adjusting
numeric value
In the APP main menu state, click the
notice(In gray means the function is off).
When there is missed call, the watch icon "
any button to stop it.
Slide up
the phone's
screen
Click
confirm
When the watch display "Done", it means the
sports parameter setting is finished
BLE on state
Time Setting
ALARM
Click confirm
Click done
Setting the sleeping
time (on and off)
"Confirm" button
The sports parameter setting
The sport parameter setting
(Taking height setting
as an example)
Call Notice
After 2s
Search "Youngswatch"
then install
Android system:
Samsung mobile phone android version 4.3 above (such as : Note4,Note5,
Galaxy S5, Galaxy S6 and others), other brand mobile phone reference
to use.
Battery(CR2032)
50M Water Resistant
Chart D
Slide up
the phone's
screen
S O S
SYNC TIME
NOTICE
Sleeping switch
This month sleeping data
Done
Sliding phone
screen to left
System Requirement For Mobile Phone
In the timekeeping mode,
press "C" to illuminate
the display about 3 seconds.
100 Years Calendar
Chart C
After 3~5s
Setting
units
After 2s
Turn on APP Store
Pacer
Low power indicator
Yesterday sleeping data
Click install
After a
few
seconds
World Time
Guide page1
Click here
Today sleeping data
This month sports data
Click here, the APP data
will synchronize with the
watch data
Click YoungsWatch or 2U Watch
Logo
Yesterday sports data
Setting up sedentary reminder
Setting
sex
Click setting
D -- Start / Stop / +
Countdown Timer
Click
here
Today sports data
Click the icon Youngs
watch on phone desktop
Select
numeric
value
Click
here
Continued from
previous page
C -- EL backlight / -
Safety Range Notice
Setting up sleep monitor
Click
here
Click
here
Click
here
"C"
B -- Mode
Click
here
Click
here
Chart B
Continued from
previous page
After 1s
Camera
Find
4. When mobile phone locates the watch, click YoungsWatch or 2U Watch,
a few seconds later, the watch will be connected to the phone automatically;
The sport parameter setting
SLEEP
SPORT
User opens the APP, and click the icons below, it will open the APP
interface.
The directions of APP home and icons are shown below.
1. Firstly turn on the phone's bluetooth function;
2. Enter into APP search screen follow the steps as below:
APP Install For iOS System
Event Notice
E-Mail Notice
Click here
Searching on APP store and find "Youngswatch" APP then follow
instructions to install to you phone.
2. To install the "Youngswatch" APP in the following steps:
"A"
NAVIGATION KEY MAUNAL
Continued from
previous page
Please conduct pairing when the watch connect with mobile phone
first time.
The watch is already an electronic precise one for monitoring sports
and sleeping, but due to possible user operation errors, external
interference or failure factors, etc., the results may become inaccurate
which is only for users' reference and we also advise the watch to be
used in conjunction with medical equipment.
42
3. Should moisture appear inside the watch, have it checked immediately by
your dealer. Otherwise it can cause corrosion of the metal parts of the watch.
4. Though the watch is designed to withstand normal use, you should avoid
rough use or dropping the watch.
5. Avoid exposing the watch to extreme temperatures.
6. Wipe the watch with dry, soft cloth only. Avoid allowing it to come into direct
contact with chemical materials, which can cause deterioration of the plastic
parts of the watch.
7. Avoid to wear the watch in electromagnetic, static conditions.
43
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
Non-professionals, do not disassemble.
USER'S MANUAL
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
44
( Bluetooth Smart Watch )
Made in China
16708-YPM(MD16385)-E

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 1
Create Date                     : 2016:10:18 10:04:35
Modify Date                     : 2016:10:18 10:04:35
Producer                        : Corel PDF Engine Version 9.397
Author                          : HTD
Creator                         : CorelDRAW Version 9.397
Title                           : 16708-YPM(MD16385)-101x75P46-Youngs-E
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AE3L-MD15367

Navigation menu