Youngshin Electronics J2W8000R Car Alarm System User Manual 2w8000FMR

Youngshin Electronics Co., LTD. Car Alarm System 2w8000FMR

Users Manual

Young Shin Electronics,Inc.www.magicar.comUSER’S GUIDE2W8000FMR2W8000FMR-2ndYoung Shin Electronics, Inc.www.magicar.comTwo-Way FM Remote2W8000FMR /2W8000FMR-2ndFCC ID : O44J2W8000RThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this device.
Page 21. Safety Information Page 32. Remote-Pager : 2W8000FMR, 2W8000FMR-2nd W/LCD Page 33. Description of Remote Appearance Page 44. GLO color LCD Page 45. LCD Icons Page 56. Remote-Pager Button Functions Page 67. More Button Functions Page 78. Remote-Pager Learn Routine Page 89. Auto-Start Function Page 810. Reservation Mode Page 911. Canceling Reservation Mode Page 1012. Valet Mode Page 1113. Safety Shut Down Features Page 1114 [I-] Auto Arming Page 1115. Turbo Mode Page 1216. 2nd car Mode Page 1217. Limited Lifetime Consumer Warranty Page 13Your Warranty Page 14TABLE OF CONTENTS........................................................................................................................................,............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Important!Under normal circumstances, Reservation Mode is cancelled when a door or hatchback opens. Please verify that the opening of any door orhatchback cancels Reservation Mode. If any of the doors or hatch back are notmonitored by Young Shin Electronics, Inc. because of improper installation or a faultydome light switch, do not use the Young Shin Electronics, Inc. and take your vehicleimmediately to the dealer for repair. Do not set Reservation Mode if the window(s) areopen or if there is anyone inside the vehicle, this includes animals. Remote startinstallation in a manual transmission vehicle with a convertible top is not recommended.Page 3Safety InformationPlease take these safety precautions into consideration under the following conditions: 1. Servicing the vehicleWhen servicing your automobile (i.e. changing the oil, washing your car), the Young Shin Electronics,Inc. system should be in Valet Mode. There is a safety shutdown switch under the hood thatdeactivates the remote start function if the hood is open. However, if the switch has been damaged or the switch has been installed improperly,the vehicle may start when button II is pressed for 2 seconds, even if the hood is open. 2. Loaning your vehicle to othersWhenever you loan your vehicle to an individual who is not familiar with Young Shin Electronics, Inc.,you may want to put the system in Valet mode. This will prevent the borrower from accidentallyactivating the Young Shin Electronics, Inc. auto-security system.3. For manual transmission vehiclesIf the Young Shin Electronics, In system is installed in a manual transmission vehicle, extraprecautions are required because the Young Shin Electronics, Inc. does not monitor the gear shifter :Remote-Pager : 2W8000FMR/ 2W8000FMR-2nd w/LCDThe model name, 2W8000FMR, 2W8000FMR -2nd is a Two Way 447MhzFrequency Modulated Remote with Liquid Crystal Display.This transmitter allows you to activate multiple functions by pressing differentcombinations of the 4 buttons on the unit.The remote-pager comes with GLO, which is a unique color LCD displaythat visually tells you the security status of your vehicle as long as you are in range. There are differing icons that will appear on your GLO LCD indicating what your vehicle is currently doing. GLO color LCDPage 4Description of Remote AppearanceFront Side Rear2W8000FMR-2nd2W8000FMR
Page 5LCD IconsIndicates that someone is paging you from your vehicle.Indicates that your car is locked or unlocked. Indicates that your remote-pager is transmitting signals to thecontroller unit.Indicates that vibration mode is on.Indicates if RPS is on.Displays remaining battery life.1. Time Clock. 2. Remainder of the engine running time. Indicates that Timer Mode is on. Indicates that Turbo Mode is on. ( 2W8000FMR ) Indicates that Passive Arming Mode is on. Indicates that 2nd Vehicle Mode is on. ( 2W8000FMR-2nd ) Indicates that the Shock Sensor has been triggered.Indicates that Shock sensor is turned off.Icon ExplanationIndicates that you are in Valet Mode.Indicates that your parking lights are flashing.Indicates that your siren is turned on.(Locking and unlocking only.)Indicates if the Auto Lock/ Unlock mode is on. ( Icon flashes for longer range.) Remote-Pager Button FunctionsIndicates that your vehicle has auto-started properly or that theignition is on.Icon ExplanationIndicates that your trunk is open.Indicates that your hood is open.Page 65678910111/2 sec1/2 sec1/2 secIIIIIIVIIIIIIIV(I + II)1/2 sec1/2 sec1/2 sec1/2 sec2 sec 2 sec 2 secLock / ArmUnlock / DisarmAUX 1 AUX 2 Query FunctionTrunk Release Auto-start Function – on/offPanic, Press Ito turn off the siren.Siren Chirp – on/offValet Mode – on/offPassive Arming – on/offTimer Start Mode – on/offTurbo Mode - on/off (2W8000FMR)2nd Car - on/off (2W8000FMR-2nd)Shock Sensor – on/off Button(s)Pressed ForFunction121415161718(I + III)(II + III)(II + IV)(III + IV)(I + III)(I + II) (I + IV)1/2 sec1/2 sec2 sec2 sec2 secProgramming Menu 1Programming Menu 2131Indicates that your door is open.234III2 sec2 sec2 secAuto Arming turned On.(Auto icon will be turned on).Longer range Auto Arming On.(Auto icon Flashes.)Auto Arming turned Off.
Page 7Note: " " Represents pressing the button for 2 seconds." ( ) " Represents simultaneously pressing the buttons." ( ) " Represents simultaneously pressing the buttons for 2 seconds.More Button Functions(1) Time SettingTones will sound for confirmationSTEP 1(II+III)2 secButtonPressedFor FunctionTime setting is on. The numbers willflash, and tones will sound.STEP 2(I)(II+III)1/2 secChange hour.Change minutes.Time setting is off. Tones willsound.STEP 3STEP 4(I)(II)1/2 sec1/2 sec2 sec(2) RPS & Vibration mode on or off Note : Step 2 must be completed within 15 seconds. If not, start over at step 1.Tones will sound for confirmationSTEP 1(II+III) 2 secButtonPressedFor FunctionSTEP 2RPS on or off, tones will sound for confirmation.Vibration mode on or off, tones willsound for confirmation. (III)(IV)1/2 sec1/2 secI button Proceeds in (1) (2) (3) (1)..... repeatedly. At (2) , the icon will flash.Note : Page 8Remote-Pager Learn RoutineThe Young Shin Electronics, Inc. system will allow up to three remotes to beprogrammed to one vehicle. Please perform the following procedure to add orreprogram additional remotes.Step1 :Activate Valet/Programming mode by manually turning the ignition on and off five times(between Acc and On)with the key within a 7 second period. The parking light will flash once with successful completion of this step.Step2:Within a 7 second period after cycling the ignition for the 5th time, press button I. The parking lights will flash once to confirm that the transmitter has been programmed. You can continue programming additional remotes. The parking lights will flash two times when the programming mode has expired.shows the amount of run-time left in the remote start mode.Press button IIfor 2 seconds to auto-start an automatic transmission engine.Remember, that a key in the ignition is required to drive the car.For manual transmission vehicles, please use reservation mode. Press button IIfor 2 seconds in order to turn off an auto-started car.The engine will run 15 or 25 minutes (25 or 45 min for diesel) depending on presetoptions at the time of installation and then shut off.Auto-Start Function Anti-GrindThe anti-grind circuit (an optional feature provided by your installer) prevents youfrom engaging the starter on a remote-started vehicle.
Page 9Diagnosing problems with Auto-Start If there is a problem in auto-starting your vehicle,the Young Shin Electronics,Inc.system will do one of two things; if it fails for any of the reasons listed in the tablebelow, it will flash the parkinglights three times then flash the error number.Otherwise, it will attempt to start the vehicle three times. If, after three times, thevehicle will not start or stay running, the Young Shin Electronics,Inc. system will shutdown. In either case, please see your installer to resolve the situation.1234567Error Number(# of timesparking lights flash) Error ReasonEngine OnKey OnDoor OpenTrunk OpenBrake On Hood OpenReservation Off (Manual Transmission Only)Reservation Mode(manual transmission only)In order to auto-start your manual transmission vehicle, you must first set theYoung Shin Electronics,Inc. system to Reservation Mode before leaving your vehicle.The purpose of Reservation Mode is to leave the transmission gear in the neutralposition when you leave your vehicle. Reservation mode is intended for use onMANUALTRANSMISSIONS ONLY and NOT FOR AUTOMATIC TRANSMISSIONS.Reservation Mode must be engaged each and every time you leave your manualtransmission vehicle in order to auto-start it.Note : The system is not recommended for vehicles with removable tops.Important requirements to activate Reservation ModeThe transmission must be in the NEUTRAL position. The vehicle windows must be rolled up. Do not set the reservation mode with people in the vehicle. Do not auto-start the vehicle with people in the it. Page 10Important! When the vehicle shuts off after reservation mode, the YoungShin Electronics,Inc system will lock/arm the vehicle. Take care to not lock yourkeys inside.Activating Reservation Mode(Manual Transmission only)Step1 : After arriving at your destination, and BEFORE TURNING YOUR ENGINE OFF, place the transmission in the Neutral position.Step2 : Activate the parking brake.Step3 : Remove your foot from the foot brake.Step4 : Remove the key from the ignition, and the engine will remain running.Step5 : Exit the vehicle and close the door within two minutes after activating the parking brake. The engine will shut off and reservation mode for the remote-starter is now complete.Your vehicle is now ready for auto-starting. However, the reservation mode will be cancelled if a door is opened or the Young Shin Electronics,Inc system is put inValet modeafter the reservation has been set. Once cancelled, you will have to startthe vehicle with the key and repeat the above 5 steps if you want to restorereservation mode. Important!If you try to auto-start the vehicle when reservation modehas not been set, the auto-start feature will not work. When you press the auto-start button, the remote will beep three times. The car parking lights will flash three times, pause, then flash seven times. If you do not want to set reservation mode, shut off the engine before you exit the vehicle. The engine will shut off for the following reasons: You did not activate the parking brake or pressed the foot brake when you turned the key to the off position. You released the parking brake while the engine was running. You entered Valet Mode after the Reservation Mode has been completed. Canceling Reservation Mode
Page 11While the vehicle is in valet mode, only the keyless entry function will be available.Valet Mode is very useful when loaning your vehicle or having it serviced.In order to enter Valet mode, press buttons (I+III)simultaneously for a 1/2 second. In order to manually enter Valet Mode, insert your key into the ignition and turn the ignition on, then off,(between ACC and ON)five times within 10 seconds.Valet ModeYou can exit Valet Mode only by pressing buttons(I+III)simultaneously for a 1/2 second. Safety Shut Down FeaturesThe Young Shin Electronics,Inc. 2W8000FMR, 2W8000FMR-2nd system has severalshut down safety features. The following actions will shut down the engine or preventthe car from auto-starting : Opening the hood, pressing the brake, or if Valet Mode isturned on.away from the vehicle by more than 50 to 100 ft, and (3) 15 seconds have passedsince the last Auto Disarm. Your system will disarm automatically if your remotecomes within a 50 to 100 ft radius from the vehicle. Setting Auto Arming Function.The range varies significantly depending on the radio signal environment.Each time you press button Ifor 2 seconds :First time : Auto icon is turned on.Second time : Auto icon flashes - for longer range.Third time : Auto icon is turned off.You can turn this function on or off by pressing button [I] for 2 seconds. When Auto arming is set, your security system will armautomatically after (1) all the doors are closed, (2) your remote is [ I]Auto ArmingPage 12Turbo ModeIf this optional Turbo Mode has been programmed at the time of installation,you can turn this feature on and off by pressing buttons(III + IV)for a 1/2 second.In this mode, if the emergency brake has been set, the engine will continue to run after the key has been taken out of the ignition. It will run until two minutes after theemergency brake has been set.• To utilize this mode, the emergency brake sensing wire has to be connected to the emergency brake wire of the vehicle. Consult the authorized dealer for this mode. • This option is ideal for turbo-charged vehicles because it allows the turbo too slowly cool after operation.(2W8000FMR)2nd Car ModeThis Remote-Pager is able to operate a 2nd vehicle. Press buttons III & IVsimultaneously for 1/2 second. If this mode is turned to 2nd Car,the Remote-Pager will not communicate with the 1st vehicle. To Exit 2nd Car pressbuttonsIII & IVsimultaneously again.(2W8000FMR-2nd)
Young Shin Electronics,Inc. Warrants to the original purchaser that this product shall be free of defects in material and workmanship under normal use and circumstances forthe period of time that the original owner of this product owns the vehicle in which it isinstalled ; except that the remote controller unit for the period of one year from the date of installation to the original owner of this product. When the original purchaser returns the product to the retail store where it was purchased or prepaid postal to Young Shin Electronics,Inc, 3415 S. 116th St Seattle,WA 98168, USA within the warranty period, and if the product is defective, Young ShinElectronics,Inc, will at its option repair or replace such.TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COMMERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO, THE EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OR PATENTS, IN THE UNITED STATES OF AMERICAAND/OR ABROAD. NEITHER THE MANUFACTURER OF ANY ENTITIES CONNECTED THEREWITHSHALL BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTALDAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIALLOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights, which vary State to State.Limited Lifetime Consumer WarrantyPage 13Young Shin Electronics,Inc. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGESWHATSOEVER,INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIALDAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE that may or may not resulted from the operation ofYoung Shin Electronics,Inc. NOT WITH STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITEDWARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Your WarrantyThe product’s warranty is automatically void if its date code or serial number is defaced,missing or altered. This warranty will not be valid unless you have completed the registration card and mailed it to Young Shin Electronics,Inc., within 10 days after thepurchase to the address listed on the registration card.Page 14

Navigation menu