Yuneec Technology SR12S Radio Controller Receiver User Manual SR12S 20140617x
Yuneec Technology Co., Limited Radio Controller Receiver SR12S 20140617x
Manual

SR12SUserManual
ConnectingSR12StoST24
PlugthecablefromFC0(flightcontrolforHX4)intoSR12Ssocket,andpoweronHX4.LeanHX4
noseforwardtwicetimes,theBLUELEDofSR12Swillflashslowly,indicatingthereceiverready
forbinding.WhenthebindingbetweenSR12SandST24completes(seethefollowinginstructions
ofBinding HX4 and ST24),theBLUELEDwillbeoff.TurnonST24,pressFPVandpress‘Take
off’.
Binding HX4 and ST24
HX4withgimbal,cameraandLK58
Push the POWER Switch to the left side and Power on ST24→Keep HX4 nose to north, and
power on HX4 as the arrow shows →Wait until HX4 completes self-inspection, and BLUE LED
flashes→ Hold HX4 tail and lean the copter forward twice, and YELLOW LED flashes →Press
‘PAD’ →Press ‘Settings’ and find WiFi signal of LK58, choose it and enter the password, press
‘Connect’, it will show “Connected”→Press twice and back to the main interface →Press
‘FPV’ on the main screen of ST24 →Press ‘System Settings’ →Press ‘Refresh’ →Choose your
Model and Camera →Press ‘Bind’ →Press →Press ‘Take Off’ and you will hear 2 beeps,
Lackanyoneofgimbal,cameraorLK58
Push the POWER Switch to the left side and Power on ST24→Keep HX4 nose to north, and
power on HX4 as the arrow shows →Wait until HX4 completes self-inspection, and BLUE LED
flashes→ Hold HX4 tail and lean the copter forward twice, and YELLOW LED flashes →Press
RC → Press ‘system settings’ →Press ‘Refresh’ →Choose your receiver’s code of HX4→Press
‘Bind’ →Press →Press ‘Ready’ and you will hear 2 beeps

2
SR12SBLUELEDStatus
ThreestatusforSR12SBLUELED:off,slowflash,andsolid.
‐SlowflashoftheBLUELEDindicatingthereceiverisreadytobind.
‐SolidBLUELEDindicatessmoothworkingstatusofSR12S.
‐LEDofffromslowflashstatusshowssuccessbindingbetweenSR12SandST24.
‐BLUELEDsolidturnsintoLEDoffstatusshowssignallostbetweenSR12SandST24.
Socketforgimbal
Antenna
SocketforFC0

3
FCCStatement:
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforPart15oftheFCCrules.
Theselimits
aredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential
installation.This
equipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandused
in
accordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.
However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthis
equipmentdoes
causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedby
turningthe
equipment
offandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe
followingmeasures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmenttoanoutletonacircuitdifferentfromthattowhichthereceiveris
connected.
Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwo
conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemust
acceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
Note:Modificationstothisproductwillvoidtheuser’sauthoritytooperatethis
equipment.
ICStatement:
ThisdevicecomplieswithIndustryCanadalicence‐exemptRSSstandard(s).Operationissubject
tothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)thisdevice
mustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthe
device."
ICDéclaration:
LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradio
exemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes:(1)l'appareilne
doitpasproduiredebrouillage,et(2)l'utilisateurdel'appareildoitacceptertoutbrouillage
radioélectriquesubi,mêmesilebrouillageestsusceptibled'encompromettrele
fonctionnement.
Remarque:Toutemodificationdeceproduitannulel'autoritédel'utilisateurà
utilisercetéquipement