Yunlink Technology AC3000 Wireless Management Platform User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3008120
Application ID	N3DnCp7uHaJJwUwbRXKR/A==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	456.15kB (5701862 bits)
Date Submitted	2016-05-27 00:00:00
Date Available	2016-05-27 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	cairo 1.13.1 (http://cairographics.org)
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual 2
Document Creator	cairo 1.13.1 (http://cairographics.org)

Add /Remove AP into group:
Pls following the step showed in following picture:
Configure the AP’s data in group:
All the data configed here, such as SSID, password, channel... will applicated to all the AP in this
group.
Pls take following picture a reference:
4.3 Device Log
For this log part, record all the AP activities for better technical support.
Can clear it if no need this info.
4.4 Address Server:
Address Server, mean this AC controller can distribute IP address for the Wireless AP connected
with this AC controller, to avoid AP’s IP address conflict in setup.
Server IP address: mean the server’s IP address, if user set is as 192.168.188.1, then AP will get
IP address of 192.168.188.X.
Server Address Count: Mean how many AP can connect with this AC controller.
Allocated AP number: Mean QTY of Wireless AP connected into this AC controller.
4.5 Intelligent Gateway
In this part, AC controller work as enterprise router, can access into more than 200 end users.
A. LAN Settings:
Click Intelligent Gateway will automatically jump to the LAN settings
LAN IP Setting:
Set IP address for LAN
Subnet mask
Set Subnet mask for LAN
DHCP Server
DHCP server enable mean it will assign IP address for users.
DHCP Client IP
DHCP Client IP mean the IP address range assigned by DHCP Server.
DHCP Lease Time
The networking device get IP lease time from DHCP server.
B. WAN Settings:
In this part, configure the WAN networking mainly.
Dynamic IP:
WAN interface obtains IP and DNS information through DHCP mode.
PPPOE(ADSL):
WAN interface obtains IP and DNS information via PPPOE dial‐up mode.
Static IP:
Set IP and DNS information for WAN interface manual
PPTP:
WAN interface obtains IP and DNS information via PPTP mode
MAC Clone:
Specifies the WAN interface MAC, by clicking [Search MAC Address] button, and then will pop up
a connected device's MAC, select the MAC desired to clone. You can manually specify the MAC
Enable IGMP Proxy:
Enables IGMP proxy, this feature can be forwarded IGMP data from WAN to the LAN
Enable Ping Address on WAN:
This feature allows outer net to ping WAN
Enable Web Server Address on WAN port
Enable this feature, allows to manage AC3000 from outer net via a specified remote
management port
C. Cloud Setting:
Make this AC controller to connect with cloud server for captive portal authentication.
Pls note: AC controller can access into cloud server in Gateway operation mode;
Cloud server should support wifidog.
Cloud Server Setting: Enable or Disable.
Cloud Server: Input the cloud server’s IP address or domain name.
Login Name: mean the account name in this cloud server.
Contact infomation: pls input if have.
D. Authentication settings and local authentication management.
Make authetnication through the cloud server.
For this part, pls refer to the authentication user manual.
Chapter 5 Firewall
5.1
IP/Port Filtering
IP/Port Filtering
IP/Port forwarding enable, router will limited the data forwarding according to the filtering rule. If
the filtering rule is [refuse] , then the router will refuse to forward the data in accordance with
filtering rule.; If the filtering rule is [allow], the router will forward the data in accordance with
filtering rule.
IP Range
Set IP address range
Protocol
Set filtering rule protocol
Port Range
Set filtering port range
Mask
A simple description of the entry rules, for user’s easly management;
5.2
MAC Filtering
MAC Filtering
Enabling Mac filtering, router will restrict data forwarding based on the selected filtering rules;
When selected Close, router will decline the pointed incoming data; When selected as Open,
then router will allow the pointed incoming rules;
Mac address
Set up rules in mac address, users can click Searching Mac Address from the clients in routers, or
can set up the mac address manually;
Mask
A simple description of the entry rules, for user’s easier management;
5.3 URL Filtering
URL Filtering
Enabling URL filtering, router will restrict access to the pointed URL;
URL address
Set up the declined URL address
5.4
Port Forwarding
Port forwarding
Port forwarding is to forward data from one port to another port, enabling external users have
access to an internal private IP in LAN, from an external triggered NAT router ;
Rule Type
Set up rule type, which have specific port number;
Rule name
Port forwarding rule name
LAN IP
IP of the port forwarding
External port
External port number of port forwarding
Internal port
Internal port number of port forwarding
Protocol
Protocol used for port forwarding
5.5 DMZ Settings
DMZ
DMZ is short for demilitarized zone; It’s a compartment between security zone and non‐security
zone, in order to solve the problem of external network can not access into internal server after
firewall installation;This DMZ zone is a small network zone between external and internal
network; While in this small zone, users usually place some open server, like web server, FTP
server, or forum; DMZ will protect internal network more efficiently, because this network
allocation is another obstacle for hackers, compared to normal firewall
IP LAN IP
IP address of DMZ host
Chapter 6Storage/Server
Before use the storage function, pls make sure insert the USB disk into router, then click Storage,
following picture will be showed, there are USB Disk, SAMBA Settings, DLNA settings for choose
A.USB Disk: When insert the USB disk to router’s USB port, then will appear following page show
the files directory path and partitions name.User can add/delete the files.
B. SAMBA function
We can share the files in USB disk to public users through SAMBA server
Click SAMBA Settings, then set user name and passwords in wireless router, then apply.
C. DLNA function
User can build a DLNA server through this function. It work with mobile phone or other device
support DLNA, then share the files in the local internet.
Chapter 7 Device management
7.1 System management
Backup
Save the configuration files to your computer
Restore
Using the saved configuration file recovery configuration
Restore default
Restore the factory default settings, please press this button
Reboot
Reboot the system
7.2 QoS
Status
Enable or Disable QoS function
Upload
Set up total uploading bandwidth
Download
Set up total downloading bandwidth
IP Address Range
Set up IP range of bandwidth
MAC address
Set up bandwidth control by mac address, user can choose it from Scan MAC, or setup by
manual.
Mode
QoS mode settings, shared mode means under the QoS rules, the main PC within all IP range can
share the specified bandwidth;
Exclusive mode means single main PC can share the specified bandwidth;
Max bandwidth
Max bandwidth under QoS rules
7.3. DDNS
7.4 User management
User Name
Reset new log‐in user name
Password
Reset new log‐in password
Confirm Password
Comparison to new password, to confirm user input password correctly in two times;
7.5 Device Log
Status
Enable or Disable to show system log
Remote Log Service
To decide whether send System log into some pointed remote server synchronously;
7.6
Upgrade Firmware
This feature allows the device firmware upgrade.
Noted:Upgrading software may cause system outage, In the process of upgrading the firmware,
do not power off, otherwise it may damage the AC controller!
7.7 System Time
Synchronization with the host
Synchronization time with connected PC and router
Status
Enable or Disable NTP
NTP Server
Select the server time synchronization
Custom NTP Server
Setting user‐defined synchronization server IP address
Time Zone
Setting the router’s time zone
Pls note, System time can work under Gateway operation mode.
And user can set the automatic reboot of thisAC controller in system time.
Hardware Technical Data
Hardware Data
Model
AC3000
QTY of manageable AP
Max: 100PCS
CPU
MT7621, 880MHz
FLAH
16M
DDR3
256M
Interface
510/100/1000M Gigabit RJ45 Port
1 Reset Button
Dimension
440mm x200 mm x 45mm
Power
100-240V～ 50/60Hz
power consumption
< 5W
Weight
<2.5KGS
Working Temperature
-20℃~ 45℃
Working Humanity
10% ~ 90%RH (No condensation)
Storage Temperature
-30℃ ~ 70℃
Storage Humanity
5% ~ 90%RH (No condensation)
Note:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC (additional information)
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Creator                         : cairo 1.13.1 (http://cairographics.org)
Producer                        : cairo 1.13.1 (http://cairographics.org)

EXIF Metadata provided by EXIF.tools