Yunlink Technology AC3000 Wireless Management Platform User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3008119
Application ID	N3DnCp7uHaJJwUwbRXKR/A==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	351.1kB (4388797 bits)
Date Submitted	2016-05-27 00:00:00
Date Available	2016-05-27 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	cairo 1.13.1 (http://cairographics.org)
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual 1
Document Creator	cairo 1.13.1 (http://cairographics.org)

Wireless Management Platform
AC3000
User Manual
V1.0
Chapter 1 Manual Introduction
This manual is subject to tell users how to use this WLAN management platform properly, suit for
those familiar with basic networking knowledege and terminology,
Then this user manual including the connection of AC controller, description of this platform’s
properties, and how to configure this platform; Pre‐reading this manual before operation is highly
recommended;
Chapter 2:Products Introduction
2.1 Products description
AC3000 is a highly performance WLAN controller, specially for Indoor and outdoor wireless
access points which set up in hotel or small‐medium sized enterprise;
It’s capable for managing all Access point, support AP auto‐detection, AP status preview, AP
configuration,MAC filtering, AP software upgrade simultaneously to provide high
quality&performance& reliability,easy installation&maintenance WIFI service to different clients;
2.2 Products Properties
Hardware property
Deploy dual core CPU, 880Mhz frequency
Deploy high capacity&speed memory, up to 256M DDR3 SDRAM;
5 * 10/100/1000Mbps Gigabit Ethernet port
Software property

AC3000 detect and connect to wireless access point automatically, no need to configure any
AP, realize true centralized AP management function








Monitor AP status in real‐time,auto‐in
nspection AP’s working status(up
or d
down), show each
nder interfacee page;
ap status un
Configure reelated properties to each
h AP simultan
neously, like setting SSID,,connection type,
Security type,etc;
Adjust WIFI RF output manually,
to fit
f for differe
ent networkin
ng environment, to maximum
WIFI coverage;
AP address server functtion can allocate IP addrress for different AP working in the same
segment, no
o need to set up AP’s IP address manually;
Support smart gateway mode, workiing as a Gigaabit router, to
o realize routter,AC,AP add
dress
server functtion in the sam
me unit;
Adjust each AP’s WIFI settings like Channels or location rem
mark, providin
ng auto‐restaarting
n AP;
functions on
Support WIFFI MAC filtering, only allo
ow the device
e, whose MAC address is in the rule lisst, to
have WIFI acccess, make sure
a secureer network allowed;
Full WEB management
t, clear and concise ,m
make AP management eeasier and much
convenient;
2.3
3 Produ
uct Layo
out
2.3
3.1 Front Panel
AC30
000 front pan
nel is like follo
owing:
LED Indicator
LED Light
Name
In
ndication
Pow
wer
Power Liight
Po
ower is on, means
status is
i up
Po
ower is off, mean
status iss down
Run
System Light
flaashing,means system status is normal
offf or stable stteady, means status is abn
normal
Rese
et button
If neeed to resto
ore the AC30
000 into facttory default, pls do follo
owing proced
dure: Powe
er on
AC30
000, use a pin
p to press and hold thee reset butto
on until all LED
L becomess quick‐flash from
slow
w‐flash.
Then
n release thee button and wait AC3000
0 to reboot to
o its factory default
settinggs. After thatt, the
defaault IP addreess of AC300
00 is still 192
2.168.10.1,de
efault user name
and paassword are both
adm
min;
RJ45
5 Ports: 5x 10
0/100M/1000
0Mbps auto‐n
negotiation RJ45 Ethernet Port;
Supp
port any conn
nection devicces in 10/100M/1000Mbp
ps bandwidth;;
Notiice:
LAN//WAN port is LAN port only
on the default
mode
e, only when WAN settingg is enabled then
LAN//WAN port will
w change to WAN port;
2.3
3.2 Real Panel
AC30
000 real paneel is like follow
wing:
DC Jacket
DC Jacket
located on the righ
ht side of AC
C3000’s reaal panel, inpu
ut power sho
ould be ac power
100‐‐240V~ 50/60
0Hz 0.3A
Anti‐thunder ground connection:
Please deploy ground connecction to avoid
d lightening stroke,
by copper core cable in yellow
w and
greeen jacket;
For detailed
instaallations please refer to reelated manuaals, like <>
Attention:
Please use original power cord
d for installattion;
Set locate
power outlet near the
t devices, to
t make saferr and easier installation an
nd operation
2.3
3.3 Conne
ection
Pls power
the AC
C controller, and connect the AP in follo
owing working diagram:
Pls note,
in abovve picture, can make Wireeless AP conn
nect with PoEE switch, PoEE switch’s uplink
portt connect witth AC controller’s WAN port, total co
onnection will be based o
on the application
environment.
Chapte
er 3 Co
onfiguratio
on Gu
uide
3.1
1 Login Web In
nterface
Pls confirm
the fo
ollowing poin
nts before loggin AC3000:
1)Co
onnect the managment
ho
ost(PC) to LA
AN port of AC
C controller or
o UP‐link porrt of switch in
n the
who
ole networkin
ng.
2)Th
he managemeent host(PC) has
h been pro
operly installe
ed IE 7.0 or higher browser version
3)Th
he managemeent host’s IP address has been set the same neetwork segmeent with AC3
3000,
nam
mely 192.168
8.10.X (X is between 2‐‐254 arbitrary integer Number),
a subnet massk of
255..255.255.0.
4) In
n order to en
nsure a better effect of Web
W interface displays, it is recommended to adjusst the
display resolution
n to 1024 × 768 or more pixels.
Operation Steps:
1. Open IE brow
wser,Input http://192.16
68.10.1/ in the
address bar to loggin AC3000 Web
man
nagement inteerface.
2. AC
C3000 login screen shown in Figure 3‐1.
3 In this screen enter th
he AC3000 fo
or user name
e and
passsword, the deefault user naame and passsword is admiin / admin, click  to login.
3. Affter a successsful login, theen see AC 300
00 Web interfface page
3.2
2 Web In
nterface
e Introd
duction
3.2
2.1 Interfa
ace Overrview
AC30
000 typical Web
W interfacee shown in folllowing picturre
In this picture, on the left is the main menu area, to show AP device list, AP device group, AC
controller’s LOG info, AP address server and Intelligent Gateway.
The upper area on the right is the list management area, to show AP’s Location, name, SSID, IP
address, MAC...And users can config the AP status from this part.
The bottom area on the right is the Tab Area, show the AP QTY and status in this WLAN controller,
then can reset/reboot Wireless AP from this part also.
The bottom area of this page is AP’s firmware and hardware info, mostly for technical support.
Chapter 4
Function Setting
4.1 Device List
Device list show the status of current wireless AP connected with AC3000
Let’s introduce following button one by one:
White box: click it to make hook, mean select this AP
Red balloon: Click
to set the AP’s Location and Device name
Picture showed as follow:
SN: Show how many AP access into this AC controller
Location & Device: show where the AP setup, and what’s the name of this AP.
Device IP: AP’s IP address
Device MAC: AP’s MAC address
Users: How many end users access into this AP
Software Version: The firmware version of this AP
Channel: the channel of this wireless AP
Online Time: How long this wireless AP online and access into this AC controller.
Device Group: you can set some AP in one group, then this part will show group name mainly.
Config: click
will show following picture:
From this picture, will show each AP’s status, Basic info,and advanced setting. If any data you
want to make, then Apply to finish.
Device Status: show AP’s Model number, online time, MAC address, IP address, firmware info,
channel, RF Power...
Device Network: Show the Wireless AP’s WAN network info and IP address
Wireless Basic: Mainly to setup the AP’s SSID, VLAN, Security.
For the VLAN, the top networking should be with VLAN switch, and input the switch’s VLAN ID in
the blank part. The VLAN ID range is 0~4094.
Wireless Advanced: user can configure the AP’s mode, channel, Fregament Threshold, coverage
threshold, Max Station...
Remark: For Fragment Threshold, RTS Threshold, Beacon Interval, Aggregation, ShortGI, Rev
Option, we recommand to keed in default.
Max Station, mean QTY of end users. 0 mean no limited.
Coverage Threshold: Applicated in Roaming mainly, the working status showed as follow:
Current Connected AP: Show how many pieces AP connected into this AC controller in total.
Online AP: QTY of AP which online in this AC controller
Offline AP: QTY of AP which offline in this AC controller
Search by IP: mean search the wireless AP by IP address, make hook in the white box, input IP
address, then search.
Search by MAC: mean search the wireless AP by MAC address, make hook in the white box, input
MAC address, then search
Batch Set: mean can configure the wireless AP’s data in batch.
Refresh: Scan the AP list again.
Delete: Select some AP, then delete from this AC controller.
Reboot: Select some AP, then restart this AP
Reset: Select some AP, revert to factory default.
Firmware upgrade: can upgrade firmware for wireless AP.
4.2. Device Group:
Click Device Group at first, then will show New/Delete, Click New, then configure the data in
Wireless Basic and Wireless Advanced part; Pls note, this data will be applicated for all the AP in
this group. After finish all, set an group name, then Apply to finish.
For detail procedure, pls refer to following picture:

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 10
Creator                         : cairo 1.13.1 (http://cairographics.org)
Producer                        : cairo 1.13.1 (http://cairographics.org)

EXIF Metadata provided by EXIF.tools