Z Wave B004Scu5N8 Eaton Aspire Rf901 Switch Spec Sheet User Manual
590175-Attachment 590175-Attachment 590175-Attachment Batch9 unilog cesco-content
2017-03-24
User Manual: Z-Wave B004Scu5N8 Eaton Aspire Rf901 Switch Spec Sheet B004SCU5N8_Eaton_Aspire_RF901_Switch_Spec_Sheet 72 docs
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
Technical Data Effective February 2014 Aspire RF switch Project Name: Prepared By: Project Number: Date: Catalog Number: Type: Description Single pole, 3-way, 4-way 15A, 120V/AC, 60Hz LED, CFL, incandescent, magnetic low-voltage, electronic lowvoltage, fluorescent, halogen Design features for Aspire RF switch RF9501AW Designer series RF9501DW Decorator series • Compatible with Aspire RF accessory switch (RF9517) for wireless 3-way control eliminating the need for traditional 3-way wiring (up to 5 locations) • Neutral wire required for installation • Can be associated with up to 5 other devices • Decorator and designer series products offer the same functionality with two distinct styles • Electro-mechanical push button for ON/OFF operation • Patented indicator system alerts if switch is not set up in the network • Blue LED illuminates to indicate ON/OFF status • Single button programming • Programmable delayed OFF mode up to 4 minutes (default is 10 seconds) • Child lockout feature • All-ON/All-OFF inclusion • Configurable “power up state” Table 1. Aspire RF switch (no neutral required) Catalog No. Description Designer Color Suffix Decorator Color Suffix RF9501_ 15A switch AW, DS, SG, WS DBK, DLA, DW Compliances, specifications and availability are subject to change without notice. Technical Data Aspire RF switch Effective February 2014 Project Name: Prepared By: Project Number: Date: Catalog Number: Type: Applications for Aspire RF switch The Aspire RF 15A switch replaces regular switches or dimmers (where a neutral is present) to provide local and remote ON/OFF control for LED, CFL, incandescent, magnetic low-voltage, electronic low-voltage, and fluorescent lighting loads. The Aspire RF switch provides other programmable functions (scenes, events, association, child lockout, etc.) when used with Aspire RF or other Z-Wave® compliant controllers*. Each switch can be manually and remotely controlled by commands sent from an Aspire RF controller or other Z-Wave compatible controllers or programs. An Aspire RF switch utilizes existing 120V/AC 60Hz standard house wiring and fits in a standard-sized wallbox. Neutral wire required for installation. No new wiring needed. *Note: some specific Aspire RF features may not be programmable. Table 2. Specifications Catalog No. Switch RF9501 Performance Testing & Code Compliance Maximum Amperage: 15A Rating: 120V/AC, 60Hz Uses 300 Series Z-Wave Chip @ 40Kbs An Aspire RF Z-Wave enabled device must be within 60 feet of another Z-Wave enabled device to participate in a Z-Wave wireless mesh network. Any one dimmer or switch can be associated with up to 5 devices (dimmers, switches, receptacles, or plug-in modules) Please reference the Instruction Sheet included with the product for wiring installation. For programming of the device, see the Aspire RF User Manual, which is provided with either the handheld (RFHDCSG) or tabletop (RFTDCSG) controllers and are also accessible online at www.cooperwiringdevices.com/AspireRF cULus Listed 244A. NOM Certified. Complies with FCC Part 15, Class B. Z-Wave Compliant Certified Terminations Switch has four 6” wire leads for line, load, ground and neutral Material Characteristics Flammability: Meets UL94 requirements; V2 rated Temperature Rating: 32°F to 104°F (0°C to 40°C) 2-year limited product warranty Performance Consideration Installation & Programming Warranty Table 3. Color Ordering Information For ordering devices, include Catalog No. followed by the Color Suffix: AW (Alpine White), DS (Desert Sand), Silver Granite (SG), WS (White Satin), DBK (Decorator Black), DLA (Decorator Light Almond), DW (Decorator White). Designer series color options: AW AW DS Alpine White DS Desert Sand SG SG Silver Granite WS WS White Satin Decorator series color options: DBK DLA DW Decorator Black Decorator Light Almond Decorator White Table 4. Device Configuration Parameters Parameter Description Value range 1 Delayed OFF *0 to 127 -128 to -1 2 Panic ON time *0 to 127 -128 to -1 3 Panic OFF time *0 to 127 -128 to -1 4 Basic set value *0 to 127 -128 to -1 5 Power up state 1=OFF, 2=ON, 3=Last state 6 Panic mode enable 0=OFF, 1=ON 7 Not used Not used *The configuration value is a signed single byte number. This value may represent a value with no units or may represent a value such as time. 0 to 127 (decimal) represents 0 to 127 seconds of time. -128 to -1 (negative decimal numbers) represents 128 to 255 seconds as calculated by this formula. Config value = desired time in seconds (or desired value) -256 For an example of 172 seconds: config value = 172 - 256 = -84 (decimal) or 0xAC (hex) For Parameter 4 , this value is the value that will be sent in a Basic Set command as a result from association to another device. Compliances, specifications and availability are subject to change without notice. 2 eaton www.cooperwiringdevices.com Technical Data Aspire RF switch Effective February 2014 Project Name: Prepared By: Project Number: Date: Catalog Number: Type: Table 5. Device Association Information Association Groups for RF9501 Group 1 5 nodes maximum Group 2 - 254 0 nodes maximum Group 255 1 node maximum Product Dimensions 1.80” (45.7mm) 1.29” (32.6mm) 4.20” (106.6mm) 3.28” (83.3mm) 2.61” (66.4mm) 1.36”(34.5mm) Figure 1. RF9501 Single-Pole Location Wiring Diagram Multi-Location Wiring Diagram Neutral Neutral White White White Hot Black Neutral Hot Black Light Fixture Red Green Green Ground Green Ground Light Fixture Red RF Switch (RF9501, RF9518) Connects to Light Fixture Black Hot Ground Accessory Switch (RF9517) NNote: For multi-location control using the RF association function, use catalog no. RF9517. Compliances, specifications and availability are subject to change without notice. eaton www.cooperwiringdevices.com 3 Technical Data Aspire RF switch Effective February 2014 Project Name: Prepared By: Project Number: Date: Catalog Number: Type: Certifications & Compliances Catalog No. • RF9501 KEY: cULus • NOM • FCC Related Products Aspire RF controllers Aspire RF products Aspire products RFHDCSG, RFTDCSG, RFWC5WS RF9540-NDW, RF9517DW, RFTR9505-T 9566TRWS, 9544DS, 9521WS Compliances, specifications and availability are subject to change without notice. Electrical Sector 203 Cooper Circle Peachtree City, GA 30269 United States Eaton.com Cooperwiringdevices.com Electrical Sector Canada Operations 5925 McLaughlin Road Mississauga, Ontario, L5R 1B8 Canada EatonCanada.ca Cooperwiringdevices.com Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com © 2014 Eaton All Rights Reserved Printed in USA Publication No. E125-0125-14 February 2014 Eaton is a registered trademark. All other trademarks are property of their respective owners. Electrical Sector Mexico Operations Carr. Tlalnepantla Cuautitlan Km 17.8 s/n Col. Villa Jardin esq. Cerrada 8 de Mayo Cuautitlan, Mexico CP 54800 Mexico Eaton.mx Cooperwiringdevices.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2014:02:18 16:17:49-05:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2014:02:18 16:19:09-05:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2014:02:18 16:19:09-05:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:2b46a0cc-75da-486b-90be-0a3b666c400d Original Document ID : xmp.did:07801174072068118DBBAB668637C198 Document ID : xmp.id:80F825DFDF98E311B71486D9D6E8C4F8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:3BB304F7AA98E311950FC11E16D8EF4F Derived From Document ID : xmp.did:3E8F4BB28492E311825CE8DC8D0A0B79 Derived From Original Document ID: xmp.did:07801174072068118DBBAB668637C198 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:02:18 16:17:49-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False State : 1 Version : 1.1 Page Count : 4 Signing Date : 2014:02:18 16:19:09-05:00 Signing Authority : ARE Acrobat Product v8.0 P23 0002337 Annotation Usage Rights : Create, Delete, Modify, Copy, Import, Export Document Usage Rights : FullSave Form Usage Rights : Add, FillIn, Delete, SubmitStandalone Signature Usage Rights : ModifyEXIF Metadata provided by EXIF.tools