ZL WS 100 UG V3 B07DFLPTDK ZLINK Wall Switch Manual
2018-07-31
: Z-Wave B07Dflptdk - Zlink Wall Switch Ws-100 Manual B07DFLPTDK_-_ZLINK_Wall_Switch_WS-100_Manual 728 docs
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
This device requires neutral wire Scene control capable Instantly reports manual status change to controller Over the air (OTA) firmware upgrade available with supported controllers WS-100 ZLINK’s WS-100 is a Z-Wave Plus certified device with S2 security and Smart Start features. You can now add this device securely and with ease using QR code on the product with compatible gateways supporting S2 and Smart Start. Z-Wave Products WS-100 is a member of the Z-Wave family and communicates with other Z-Wave certified devices in a control network. WS-100 replaces a standard in-wall light switch and turns it into a Z-Wave device serves as a node to repeat the signal in the network, thus, extending the overall Z-Wave mesh wireless network range. Different types and brands of Z-Wave devices can be associated with ZLINK in your system and they will work together to optimize and expand the coverage of your Z-Wave network. Once setup is completed, you can enjoy the convenience and leisure which WS-100 offers. Z-Wave Plus certified Fits standard single wall plate Fits standard multiple gang junction box The DSK and PIN can be found on the metal yoke WS-100 WS-100 WA-100 device light To install the WS-100 in a single gang switch, no changes should be required. For dual or higher gang configuration where switches are next to each other, the tabs need to be removed. Simply take a pair of pliers, grab the tabs and wiggle until the tabs break off. device device device device device WA-100 device Use the manual reset procedure only in the event that the network primary controller is lost or otherwise inoperable. A Z-Wave certified controller of either portable or static is capable of setting up ZLINK units in your desired network. Once the device is added, you may assign it to a Group. It will change its reaction when the All command ON or OFF is received. Furthermore, it can be set in Association with another Z-Wave device to perform a specific function. Please refer to the instructions manual of your remote controller for details and procedures on how these settings can be done. Please note that the device will shut OFF after a power failure. The device will return to the last ON/OFF status after power restore. device light The orientation of the ON/OFF on the rocker switch can be inverted by changing the following configuration with a controller (if supported) light is ON, light light light light light light device device Activation of Central Scene Z-Wave Plus introduces a new process for scene activation – “Central Scene Control”. Press and release the button, it will send a certain command to the central controller via the lifeline association group 1. This allows the controller to react to key pressed, key released and key held down. ZL-WS-100 light is ON, Off WS-100 WS-100 WS-100 supports a maximum of 5 nodes for group #1 Configurable Parameters The following default settings can be changed if configurable parameters are supported by controller. ZLINK ZLINK’s ZLINKProducts.com 70 Commercial Ave. Warehouse A Moonachie, NJ 07074 help@ZLINKproducts.com WS-100_122617 The ZLINK unit introduced in this instructions manual has a Z-Wave certification which guarantees such an interoperability.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Format : application/pdf Title : ZL-WS-100 UG v3 Metadata Date : 2018:01:26 11:04:10-08:00 Modify Date : 2018:01:26 11:04:10-08:00 Create Date : 2018:01:26 11:04:10-07:00 Creator Tool : Adobe Illustrator CC 2015 (Windows) Thumbnail Width : 256 Thumbnail Height : 48 Thumbnail Format : JPEG Thumbnail Image : (Binary data 4949 bytes, use -b option to extract) Instance ID : uuid:d900c2c5-e22e-4a82-a46b-d8f250f0fae0 Document ID : xmp.did:8fc7b71e-5f04-7644-9044-c08715e506bf Original Document ID : uuid:5B20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:cb92d89b-6a94-624f-9337-0fba9fe20d42 Derived From Document ID : xmp.did:cb92d89b-6a94-624f-9337-0fba9fe20d42 Derived From Original Document ID: uuid:5B20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:FD7F1174072068118083EAAC79B45460, xmp.iid:8fc7b71e-5f04-7644-9044-c08715e506bf History When : 2014:07:04 15:52:41+08:00, 2018:01:26 11:03:58-08:00 History Software Agent : Adobe Illustrator CS5.1, Adobe Illustrator CC 2015 (Windows) History Changed : /, / Startup Profile : Basic CMYK Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 350.052002 Max Page Size H : 199.925081 Max Page Size Unit : Millimeters Font Name : OregonLDO-Bold, OregonLDOBlack, OregonLDO Font Family : Oregon LDO, Oregon LDO Black, Oregon LDO Font Face : Bold, Regular, Regular Font Type : TrueType, TrueType, TrueType Font Version : Version 1.000 2004 initial release, Version 1.000 2004 initial release, Version 1.000 2004 initial release Font Composite : False, False, False Font File Name : Oregon LDO Bold.ttf, Oregon LDO Black.ttf, Oregon LDO.ttf Plate Names : Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE 2955 C, PANTONE 534 C Swatch Colorant Type : SPOT, SPOT Swatch Colorant Tint : 100.000000, 100.000000 Swatch Colorant Mode : CMYK, CMYK Swatch Colorant Cyan : 100.000000, 97.689998 Swatch Colorant Magenta : 44.999999, 84.630001 Swatch Colorant Yellow : 0.000000, 36.269999 Swatch Colorant Black : 37.000000, 27.340001 Producer : Adobe PDF library 15.00 Page Count : 2 Creator : Adobe Illustrator CC 2015 (Windows)EXIF Metadata provided by EXIF.tools