ZAGG IFIMPH Wireless Headphones User Manual

ZAGG Inc. Wireless Headphones

user manual

Manualimpulse wirelessIFIMPH-BR0
IntroductionTurn on the Impulse Wireless headphones and experience premium sound unleashed. The following will show you how to enjoy your Impulse Wireless. To download a complete manual, visit www.zagg.to/manuals.Play Music1. Press the Play button to begin playing your music. 2. While music is playing, press Play quickly to pause it. Press Play quickly again to resume. 3. Quick-press the Volume Up or Volume Down buttons to control your audio volume. 4. Press and hold the Volume Up or Volume Down buttons to track forward and back through your playlist. Power and Pair1. To turn on your Impulse Wireless headphones, press and hold the Power button for three seconds until the light flashes red and blue, indicating pairing mode. The next time you turn your Impulse on, a blue LED will blink, indicating it is pairing. 2. Ensure your device’s Bluetooth® connection is on and select “IFROGZ Impulse Wireless”. Complete any additional pairing steps based on your device. The LED will flash blue every five seconds while your Impulse are on and paired. 3. To turn your Impulse o, press and hold the Power button for three seconds. The LED will flash red until they are powered o. NOTE: If you are pairing with a new device, with your headphones o, press and hold the Power button for five seconds until the light flashes red and blue, indicating pairing mode.132impulse wireless instructionsVolume Down/Track Back ButtonVolume Up/Track Forward ButtonPower ButtonPlay/Pause Button
Take Calls1. Press the Play button to answer an incoming call. 2. Press and hold the Play button for three seconds to send an incoming call to your voicemail. 3. Press the Play button during a call to disconnect. 4ChargeTo charge your Impulse Wireless headphones, connect the micro USB end of the included charging cable to the port under the left ear cup and the USB end to your preferred USB outlet. The LED will light red while your Impulse are charging. It will turn o when they are fully charged.5impulse wireless instructions
This device complies with Part 15 of the FCC ©2016 ZAGG Inc All Rights Reserved | NASDAQ: ZAGG | MADE IN CHINAThe Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by ZAGG Inc is under license. Other trademarks and trade names are those of their respective owners.ZAGG and Impulse are trademarks of ZAGG Inc.impulse wireless instructionsFCC STATEMENTRules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC CAUTIONChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu