ZAGG ZKLP ZAGG Slim Book User Manual

ZAGG Inc. ZAGG Slim Book

User Manual.pdf

ZAGG Slim Book Backlit Instructions Warranty Registration Your ZAGG Slim Book™ comes with a one-year manufacturer’s warranty. In order to activate the warranty, you must register your Slim Book as well as keep your purchase receipt. If you purchased your Zagg Slim Book from Zagg.com, Zagg® has already registered it and has a copy of your proof of purchase. NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.Zagg.com/faq Inserting/Removing Your iPad® To insert your iPad into the ZAGG Slim Book open the Slim Book’s case and remove it from the keyboard (to do this pull the case up and away from the keyboard). Then, line up your iPad with the holes in the case. Make sure the camera hole is aligned properly as well as the opening for the Lightning® cable. When everything is aligned, set the bottom half of your iPad in the cover and apply light pressure to ensure it is properly settled. Snap the top half of your iPad into the cover. Check all corners to make sure they have seated properly. When your iPad is secure in the case, you can connect it with the keyboard by placing it in the magnetic trough. Powerful magnets will secure it in place, but also allow you to remove your iPad any time it benefits you. To easily remove your iPad from the case, separate the case from the keyboard, and then gently roll the rubber molding away from the edges while pressing the tablet from behind. Grasp your tablet’s exposed side and lift/pull away from the Slim Book. Disconnecting Your Keyboard Your Slim Book features a case that protects your iPad even when it’s not connected to your keyboard. When you’d like to use the case without the keyboard, there are three ways you can disconnect your keyboard. 1. Press the Keyboard Hide/Show key. Pressing this key will disengage the keyboard and allow you to use your iPad’s on-screen keyboard. Press the Keyboard Hide/Show key again when you are ready to use the Slim Book’s keyboard.

Navigation menu