User Manual.pdf
ZAGG Slim Book Backlit Instructions
Warranty Registration
Your ZAGG Slim Book™ comes with a one-year manufacturer’s warranty. In order to activate the
warranty, you must register your Slim Book as well as keep your purchase receipt. If you purchased
your Zagg Slim Book from Zagg.com, Zagg® has already registered it and has a copy of your proof of
purchase.
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.Zagg.com/faq
Inserting/Removing Your iPad®
To insert your iPad into the ZAGG Slim Book open the Slim Book’s case and remove
it from the keyboard (to do this pull the case up and away from the keyboard). Then,
line up your iPad with the holes in the case. Make sure the camera hole is aligned
properly as well as the opening for the Lightning® cable. When everything is aligned,
set the bottom half of your iPad in the cover and apply light pressure to ensure it is
properly settled. Snap the top half of your iPad into the cover. Check all corners to
make sure they have seated properly.
When your iPad is secure in the case, you can connect it with the keyboard by
placing it in the magnetic trough. Powerful magnets will secure it in place, but also
allow you to remove your iPad any time it benefits you.
To easily remove your iPad from the case, separate the case from the keyboard, and
then gently roll the rubber molding away from the edges while pressing the tablet
from behind. Grasp your tablet’s exposed side and lift/pull away from the Slim Book.
Disconnecting Your Keyboard
Your Slim Book features a case that protects your iPad even when it’s not connected
to your keyboard. When you’d like to use the case without the keyboard, there are
three ways you can disconnect your keyboard.
1. Press the Keyboard Hide/Show key. Pressing this key will disengage the
keyboard and allow you to use your iPad’s on-screen keyboard. Press the
Keyboard Hide/Show key again when you are ready to use the Slim Book’s
keyboard.
2. Turn off the Bluetooth connection from your iPad.
3. Turn your Slim Book keyboard off.
Powering On and Off
To turn your Slim Book on, press the Power button. To turn your Slim Book off,
press and hold the Power button for three seconds.
Pairing Your Zagg Slim Book
Pairing your Slim Book with your iPad is easy. It should only need to be paired once,
using the following directions. If the connection between your iPad and Slim Book is
ever lost, repeat these steps.
1. On your iPad select: SETTINGS > BLUETOOTH > ON.
2. Press and hold the Bluetooth® button for three seconds. A blue LED under
the Power button will flash until your Slim Book and iPad are paired.
3. Your iPad will display “ZAGG Slim Book” as an available device. Select this
option to complete pairing.
Charging
Your Slim Book features a powerful lithium polymer battery that lasts for up to two
years of normal use between charges*. It comes with a charging cable you can use to
charge your keyboard quickly and conveniently. To charge your Slim Book, follow
these steps:
1. Plug the micro USB connector into the charging port.
2. Plug the regular USB connector into any 5V USB outlet.
3. Remove the micro USB connector and enjoy your Slim Book for up to two
years before you need to charge it again.
*Normal use is approximately one hour of use per day without the backlit feature. Using the backlit
feature will impact battery life and require more frequent charging.
Battery Life
As mentioned, the Slim Book features a powerful, rechargeable battery that lasts up
to two years between charges. To check your Slim Book’s remaining battery power,
simply press Fn + the battery key. The LED indicator will flash one of three ways.
1. Three green flashes indicate 50% or more battery life remaining.
2. Three yellow flashes indicate between 25%-49% battery life remaining.
3. Three red flashes indicate less than 25% battery life remaining. When your
Slim Book reaches critical battery level, the red light will flash once every five
minutes.
To help preserve battery life, your Slim Book will enter sleep mode if left on and not
used for several minutes. To awaken your Slim Book, press any key. The Slim Book’s
battery has no memory and may be charged whenever you wish. For optimal
battery life, turn your Slim Book off when not in use for a prolonged time.
Special Function Keys
Your Slim Book keyboard has been designed with the following special function
keys to give you more control over your iPad.
HOME – Displays your iPad’s home screen.
LOCK – Activates and deactivates your iPad’s sleep mode.
KEYBOARD HIDE/SHOW – Hides or shows your iPad’s on-screen keyboard.
FN + KEYBOARD HIDE/SHOW (iPAD MINI ONLY) – Hides or shows your iPad’s
on-screen keyboard.
PREVIOUS TRACK – Skips to the previous track on your selected playlist.
PLAY/PAUSE – Starts or pauses your current playlist.
NEXT TRACK – Skips to the next track on your selected playlist.
MUTE – Mutes your iPad’s audio.
BLUETOOTH – Press and hold for three seconds to pair.
POWER – Turns your Slim Book Evernote keyboard on and off.
VOLUME DOWN – Decreases your iPad’s volume.
VOLUME UP – Increases your iPad’s volume.
CAPS LOCK – Activates the Caps Lock feature. When Caps Lock is on a blue indicator
light will remain lit until it is turned off. To turn Caps Lock off, simply press Caps
again.
FN + BACKLIGHT SYMBOL – Activates your Slim Book’s backlight feature. Pressing
this key once will turn on the backlights, pressing it again will turn off the backlights.
NOTE: The backlights will automatically turn off after a couple seconds if not used. Begin typing again to activate
them.
Fn + Down Arrow/Backlight Symbol – Activates your Folio’s backlight feature. If
the backlights are already on, press Fn + Down multiple times to cycle through three
brightness settings.
NOTE: The backlights will automatically turn off after a couple seconds if not being used. Begin
typing again to activate them.
Fn + Right Arrow – Cycles through the various colors of backlit keys.
Fn+ Delete – Forward delete.
Troubleshooting
If your iPad does not respond to your Slim Book there may be a simple explanation
such as a dead battery or an unsuccessful pairing. Please use the following to help
troubleshoot your situation. If none of the following solve your issue, then please
contact Zagg Customer Service and one of our trained professionals will be happy to
assist you.
1. Restart your iPad by holding down the home and power buttons until the
Apple® logo appears on the screen.
2. Turn your Slim Book off and back on. You should see the LED illuminate
briefly, if not, charge your Slim Book.
3. After charging, turn your Slim Book on. If the LED does not illuminate, and
your keyboard doesn’t operate correctly, please contact Zagg’s customer
service.
4. If your Slim Book cannot establish or maintain a Bluetooth® connection, reset
the Bluetooth module by charging your keyboard.
5. Forget and re-pair your Slim Book. On your iPad, select: SETTINGS >
BLUETOOTH > ON. If you see “ZAGG Slim Book” listed as an available device,
touch the arrow to the right of it and choose to have your iPad forget the
device.
6. Push the Pair button on your Slim Book and watch for the LED to flash blue.
7. Your iPad should display “ZAGG Slim Book” as an available device. Select it.
8. If your iPad gives you an error message, repeat the pairing process.
For more help please see our FAQ section at: www.zagg.com/faq
To reach a trained customer service representative, please use one of the following:
Zagg.com/support/contact.php | questions@zagg.com
1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customers
For unparalleled scratch protection for your iPad, we recommend Zagg’s
InvisibleShield®.
© 2015 ZAGG Inc All Rights Reserved | Model Number: SlimBook-I-ID7ZF2-***
PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA
Apple®, iPad®, and Lightning™ are trademarks of Apple, Inc., registered in the U.S.
and other countries.
The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by ZAGG Inc is under license. Other trademarks
and trade names are those of their respective owners.
ZAGG®, InvisibleShield®, and Slim Book™ are trademarks or registered trademarks
of ZAGG Inc.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the product can be kept as far as possible from the user
body or set the device to lower output power if such function is available.