ZAGG ZKUNI Wireless Keyboard User Manual USERS MANUAL

ZAGG Inc. Wireless Keyboard USERS MANUAL

USERS MANUAL

UNIVERSALNEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ZAGG.com/faq*WARRANTY REGISTRATIONYour ZAGGkeys™ Universal comes with a one-year manufacturer’s warranty. In order to activate the warranty, you must register your Universal as well as keep your purchase receipt. If you purchased your ZAGGkeys Universal from ZAGG.com, ZAGG® has already registered it and has a copy of your proof of purchase.If your device does not respond to your Universal there may be a simple explanation such as a dead battery or an unsuccessful pairing. Please use the following to help troubleshoot your situation. If none of the following solve your issue, then please contact ZAGG Customer Service and one of our trained professionals will be happy to assist you.1. Restart your device and re-pair your Universal.2. Turn your Universal o and back on. You should see the LED status lights illuminate briefly, if not, charge your Universal.3. After charging, turn your Universal on. If the LED status lights do not illuminate, and your keyboard doesn’t operate correctly, please contact ZAGG’s Customer Support.4. Forget and re-pair your Universal. Review your device’s instructions for how to properly forget a device, and then follow the directions under Pairing Your Universal. 5. If your device gives you an error message during pairing, repeat the pairing process.8. If you still can’t get your Universal to pair, it is possible your device needs to have its software updated. Consult your device’s instructions for directions on how to update its software.9. After your update is complete, repeat the troubleshooting/pairing process*. * If you continually receive the same error message during pairing, or the above steps don’t work, please contact ZAGG’s Customer Support for assistance.TROUBLESHOOTINGFOR MORE HELP PLEASE SEE OUR FAQ AT: www.ZAGG.com/faqTo reach a trained customer service representative, please use one of the following: ZAGG.com/support/contact.php | questions@zagg.com1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customersFor unparalleled scratch protection for your device, we recommend ZAGG’s invisibleSHIELD®. ©2005 - 2013 ZAGG Inc. All Rights Reserved.PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINAZAGG®, invisibleSHIELD®, and ZAGGkeys™ Universal are trademarks or registered trademarks of ZAGG Inc.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1: This device may not cause harmful interference, and 2: This device must accept any interference received, including interference that may cause undesired operationFOLDFRONTBACK
Congratulations on being the proud new owner of the most versatile Bluetooth® keyboard available. The ZAGGkeys Universal pairs with any of your Android, Windows, or iOS devices*. Read the following instructions in their entirely as some functions of the Universal work dierently depending on the device you are using. Keep these instructions for future reference. *Not all functions work, or work the same, across all operating systems and/or across all devices within an operating system. Please refer to the device specific tables under Special Function Keys for information on specific system key functions. CONGRATULATIONSYour ZAGGkeys Universal is ready to go right out of the box. Simply follow these steps to begin enjoying the Universal with any of your devices. 1. Remove the Universal from its packaging. 2. Slide the Universal Bluetooth® keyboard out of its protective cover by securing the cover and then sliding out the keyboard by pushing it to one side or the other. 3. Place the Universal keyboard in an ideal typing location. 5. Place the stand so that the now exposed trough sits on a flat surface.6. Set your device in the trough (you can choose portrait or landscape mode)7. Turn on your ZAGGkeys Universal using the power switch on the right hand side. 8. Select your operating system using the selector switch on the underside of the Universal keyboard.9. Pair the Universal with your device (for information on pairing, see Pairing Your Universal).10. Enjoy the ease and comfort of your Universal. QUICK STARTWINDOWS DEVICE4. How to open the built-in device stand.•Hold the protective cover in one hand with your thumb on the ZAGG logo that appears on the outside of the cover. •Place your other hand on the opposite side of the cover with your finger/s inside the cover on the edge of the hinged stand. •Press outward with your fingers so that the hinged stand moves toward your thumb. N/A AltHome Lock N/A N/A N/A Cut Copy Paste Track Back Play/PauseTrackForward Mute Vol Down Vol UpFunction Launches themenu on theright side of the screenForward Deletectrl + beginning of linectrl + end of linectrl +top of pagectrl + bottom of pageFunctions in the lower right hand corner are accessed by pressing Fn + the key. FOLDINSIDE BACKINSIDE FRONT
Your Universal features a powerful lithium-ion battery that lasts for up to three months of normal use between charges. It comes with a charging cable you can use to charge your keyboard quickly and conveniently. To charge your Universal, simply follow these steps:1. Plug the micro USB connector into the charging port.2. Plug the regular USB connector into any USB outlet (including a ZAGGsparq™, your computer, your device, etc.). 3. A green LED light will illuminate to indicate the Universal is charging. Wait until this light turns o, indicating a full charge. It usually takes 2-4 hours to completely charge your Universal.4. Remove the Micro USB connector and enjoy your Universal for up to three months before you need to charge it again.CHARGING APPLE DEVICEAs mentioned, the Universal features a powerful, rechargeable battery that lasts up to three months between charges*. To check your Universal’s remaining battery power, simply hold down the function (fn) key and press the battery key (also the CTRL key). The LED indicator will flash one of three ways.1. Three green flashes indicate 50% or more battery life remaining.2. Three yellow flashes indicate between 25%-50% battery life remaining.3. Three red flashes indicate less than 25% battery life remaining. When your Universal reaches critical battery level the red light will flash once every five minutes.To help preserve battery life, your Universal will enter sleep mode if left on and not used for several minutes. To wake your Universal, simply press any key. The Universal’s battery has no memory and therefore may be charged whenever you wish. For optimal battery life, we recommend turning your Universal o when idle for a prolonged time.BATTERY LIFEYour Universal has a variety of special function keys. However, not all keys work with each operating system*. Please refer to the diagrams below to learn more about the special function keys that work with your device. *Not all functions work, or work the same, across all operating systems and/or across all devices within an operating system. Please refer to the device specific tables for information on specific system key functions. SPECIAL FUNCTION KEYSCommand Alt\OptionHome Lock Cut Copy Paste Track Back Play/PauseTrackForward Mute Vol Down Vol UpFunctionFunctions in the lower right hand corner are accessed by pressing Fn + the key. Siri PhotosHide/ExposeKeyboardCHARGING PORTForward DeleteFOLDPAGE 3PAGE 2
The Universal comes ready to go with about 80% of the battery charged. To turn it on, simply slide the power button to the ON position, you’ll see a green dot. A blue LED light will flash on the CAPS LOCK key and a green LED will flash on the fn key. To turn your Universal o, simply switch the power button to the OFF position, you’ll see a red dot. Each time you switch devices, especially one with dierent operating systems, you’ll need to pair your Universal. To pair it, make sure it is turned on and then find your operating system below and follow the directions.FOR ANDROID1. Select SETTINGS > WIRELESS & NETWORKS > BLUETOOTH > ON2. Press the Pair button on your Universal keyboard. A blue LED light will flash until your device and the Universal are paired. 3. Your device should find the Universal and then list it as an available device. If it doesn’t, simply touch Search for devices and it will scan again. 4. When the Universal shows in your list of available devices, touch it to complete pairing. FOR iOS1. On your device select: SETTINGS > GENERAL > BLUETOOTH > ON. 2. Press the Pair button on your Universal keyboard. A blue LED light will flash until your device and the Universal are paired. 3. Your device will display “ZAGGkeys Universal” as an available device. Select this option to complete pairing.FOR WINDOWS1. Press the Pair button on your Universal keyboard. A blue LED light will flash until your device and the Universal are paired.2. If you have it, touch the Bluetooth symbol in your system tray* and select Add a Device. If you don’t have the Bluetooth symbol available, simply touch the Start button and then choose Devices. From this menu you can choose Add a Device. 3. The Universal should show up as an available device; select it and touch Next to complete pairing.*Windows 8 users can use the Settings charm. POWERING ON AND OFFPAIRING YOUR UNIVERSALANDROID DEVICEN/A AltHome Lock N/A N/A Cut Copy Paste Track Back Play/PauseTrackForward Mute Vol Down Vol UpFunction Menu BackWorks withsome devicesFunctions in the lower right hand corner are accessed by pressing Fn + the key. PAIR BUTTONPOWER BUTTONFOLDPAGE 1PAGE 4
Information to Users According to the FCC Part 15.19 and 15.21 rules, for this EUT, the instructions or operationmanual furnished the user shall include the following or similar statement, placed in a prominentlocation in the text of the manual: FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu